into nuts.ninka.net:/home/davem/src/BK/net-2.5

into nuts.ninka.net:/home/davem/src/BK/net-2.5

- Support wake-on-lan with Fiber connections properly,
when possible.
- On device probe and device open, get out of 44MHZ core
clock rate if necessary.

into home.transmeta.com:/home/torvalds/v2.5/linux

Note the cdc-ether.c driver does NOT work properly now, someone who 
understands the interface mess in that driver needs to fix it up.

This adds the requirement that the usb-serial drivers call 
usb_register() and usb_unregister() themselves, instead of having
the usbserial.c file do it.  Step one in moving the usbserial.c 
code to being a "class"  :)

 Update the ov511 driver to version 1.62:
 o Update email address
 o Remove some dead code and fix some harmless typos
 o New device: Alpha Vision Tech. AlphaCam SE
 o Fix assignment of ov->proc_button->owner to not cause
   NULL pointer deref (credit: Oleg K.)
 o Support I2C read/write ioctl()s via V4L (credit: Oleg K.)
 o Add OV518-specific register dump code
 o New snapshot reset sequence; old one was causing
   erroneous I2C writes (credit: Oleg K.)
 o OV6630 needs different register 0x14 settings than OV6620
 o Don't print palette errors by default
 o Detect OV518 cameras that have packet numbering enabled
   by default and set ov->packet_numbering accordingly. This
   should fix the problems some users were having with babble
   (USB error -75) and cameras not working at all.

into kroah.com:/home/greg/linux/BK/gregkh-2.5

I noticed a kluge had been put into 2.5.35, to cover up *one* of the
errors caused by a particular bug that was introduced when Patrick
Mochel split up arch/i386/kernel/setup.c: he incorrectly thought the
AMD-defined CPUID levels were AMD-specific; they're not -- every other
x86 vendors *including* Intel uses them as well.

This also adds the "i686" hack for TM5xxx that was added in 2.4 recently.

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

This patch removes attempts to clear halts on a control endpoint (think
about it for a minute if you don't see why this is pointless....) and also
adds return-code checks for all places where halts are cleared.

This _should_ be just redundant code, but recent tests suggest that this
is, in fact, not the case.  People should _heavily_ test this patch.  I'm
going to pause here for a while (in the patch stream) until we've got this
sorted out -- initial results on my test setup seem to show some problems
still remain.  Where those problems are (HCD or usb-storage) remains to be
seen.

This patch fixes up some minor compilation problems.

This patch converts all uses of page_addres() to the sg_address() macro.
This will make backporting to 2.4 easier, as well as eliminate lots of
redundant code.

This patch removes tests of urb->status for EINPROGRESS.  As was pointed
out, that's not such a good idea, for a variety of reasons.

In the process, a semaphore became useless.

Here's a very simple patch that can go into the source tree right away.
It just fixes some occurrences of the scsi result code GOOD to GOOD << 1
in isd200.c.

Date:  Mon Sep 16 09:10:25 PDT 2002
Workarea:  jen.americas.sgi.com:/src/lord/xfs-merge.2.5
Author:  lord

The following file(s) were checked into:
  bonnie.engr.sgi.com:/isms/slinx/2.5.x-xfs


Modid:  2.5.x-xfs:slinx:127481a
linux/fs/xfs/linux/xfs_lrw.c - 1.166
linux/fs/xfs/support/time.h - 1.7
linux/fs/xfs/linux/xfs_aops.c - 1.5

Date:  Fri Sep 13 14:59:34 PDT 2002
Workarea:  chuckle.americas.sgi.com:/build/lxfs-cvs/2.5.x-xfs-VER
Author:  cattelan

The following file(s) were checked into:
  bonnie.engr.sgi.com:/isms/slinx/2.5.x-xfs


Modid:  2.5.x-xfs:slinx:127397a
linux/fs/xfs/linux/xfs_version.h - 1.2

into dhcp212.munich.sgi.com:/home/hch/repo/bk/linux-2.5-xfs

This updates the Fusion-MPT driver to the latest stable version.
Changes affect the driver source only.

Major Changes:
Reworked the calls save_flags, cli, restore_flags to 2.5 format.
Modified DV  invocation and to handle illegal bus configuration
Negotiation settings honor NVRAM

Bug Fix: Pushing F/W onto part during driver unload.
Bug Fix: Force F/W reset for 1030 on driver load.
Bug Fix: F/W download algorithm.
Bug Fix: Found a memory leak in mptctl.c
Bug Fix: Forcing data direction for reads and writes (sg issue)
Bug Fix: Wrong mask in Inquiry data ANSI version

Minor Changes:
Modified the debug and logging statements of the driver
Upgraded the MPI include files (lsi/)

This fixes a number of sys_execve() problems:

 - ptrace of thread groups over exec works again.

 - if the exec() is done in a non-leader thread then we must inherit the
   parent links properly - otherwise the shell will see an early
   child-exit notification.

 - if the exec()-ing thread is detached then make it use SIGCHLD like the
   leader thread.

 - wait for the leader thread to become TASK_ZOMBIE properly -
   wait_task_inactive() alone was not enough. This should be a rare
   codepath.

now sys_execve() from thread groups works as expected in every combination
i could test: standalone, from the leader thread, from one of the child
threads, ptraced, non-ptraced, SMP and UP.

into home.transmeta.com:/home/torvalds/v2.5/linux

Syncronizes with our SVN repo. Merged in all changes from your tree.

into home.transmeta.com:/home/torvalds/v2.5/linux