GhantaKrishnamurthy MohanKrishna says:

====================
tipc: socket diagnostics additions for AF_TIPC

The following patchsets add socket diagnostics support for AF_TIPC by
using the sock diag framework. The patchset was created on top of
commit id: fb66cb07.

New iproute2 package is needed to use this functionality which will
be sent for review in a seperate mail.

The commit series improves diagnosis of tipc sockets by exporting the
configuration, states and statistics of sockets.

The series has been co-authored by Parthasarathy Bhuvaragan and
consist of two parts:

1-2:  Adaptations of existing code to support sock_diag framework.
We modify existing functions to support socket diagnostics. Required
information about the sockets are exported.

3:  Step sk_drops during packet drop.
This occurs if the packet cannot be queued due to queue length exceeding
configured thresholds.

The diag module is optional, and if enabled it will be loaded on demand
when needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when tipc is unable to queue a received message on a
socket, the message is rejected back to the sender with error
TIPC_ERR_OVERLOAD. However, the application on this socket
has no knowledge about these discards.

In this commit, we try to step the sk_drops counter when tipc
is unable to queue a received message. Export sk_drops
using tipc socket diagnostics.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds socket diagnostics capability for AF_TIPC in netlink
family NETLINK_SOCK_DIAG in a new kernel module (diag.ko).

The following are key design considerations:
- config TIPC_DIAG has default y, like INET_DIAG.
- only requests with flag NLM_F_DUMP is supported (dump all).
- tipc_sock_diag_req message is introduced to send filter parameters.
- the response attributes are of TLV, some nested.

To avoid exposing data structures between diag and tipc modules and
avoid code duplication, the following additions are required:
- export tipc_nl_sk_walk function to reuse socket iterator.
- export tipc_sk_fill_sock_diag to fill the tipc diag attributes.
- create a sock_diag response message in __tipc_add_sock_diag defined
  in diag.c and use the above exported tipc_sk_fill_sock_diag
  to fill response.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current socket iterator function tipc_nl_sk_dump, handles socket
locks and calls __tipc_nl_add_sk for each socket.
To reuse this logic in sock_diag implementation, we do minor
modifications to make these functions generic as described below.

In this commit, we add a two new functions __tipc_nl_sk_walk,
__tipc_nl_add_sk_info and modify tipc_nl_sk_dump, __tipc_nl_add_sk
accordingly.

In __tipc_nl_sk_walk we:
1. acquire and release socket locks
2. for each socket, execute the specified callback function

In __tipc_nl_add_sk we:
- Move the netlink attribute insertion to __tipc_nl_add_sk_info.

tipc_nl_sk_dump calls tipc_nl_sk_walk with __tipc_nl_add_sk as argument.

sock_diag will use these generic functions in a later commit.

There is no functional change in this commit.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Update supported firmware version

The first patch bumps the firmware version supported by the driver. The
second patch enables a feature introduced in the new version,
auto-negotiation disable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In 'auto-neg off' the device have sent AN (auto-negotiation) frames
with the forced speed. Thus, fix it using an_disable_admin field in
Port type and speed (PTYS) register. This field indicates if speed
negotiation frames would be send by the port or not.

Add the field and enable/disable it for 'auto-neg on/off', make the
port to start/stop sending AN (auto-negotiation) frames. Note that for
SwitchX2 the behavior doesn't change (i.e support only AN enabled with
forced speed).
Signed-off-by: Tal Bar <talb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This new firmware contains:
	- Support for auto-neg disable mode
Signed-off-by: Tal Bar <talb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Peng Li says:

====================
fix some bugs for HNS3 driver

This patchset fixes some bugs for HNS3 driver:
[Patch 1/11 - 5/11] fix various bugs reported by hisilicon test team.
[Patch 6/11 - 7/11] fix bugs about interrupt coalescing self-adaptive
function.
[Patch 8/11 - 11/11] fix bugs about ethtool_ops.get_link_ksettings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When phy exists, phy_ethtool_ksettings_get function is enough to get the
link ksettings. If the phy exists, get_link_ksettings function can return
directly after phy_ethtool_ksettings_get is called.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for querying speed and duplex by ethtool ethX
to VF.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds ethtool_ops.get_link support to VF.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed link mode is returned by hns3_get_link_ksettings. It is
unreasonable.

This patch fixes it by adding some related functions to get link
mode from hardware.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we change the update rate of int_gl from every interrupt to every
one hundred interrupts, the old way to get time interval by int_gl value
is not accurate. This patch calculates the time interval using the jiffies
value.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The interrupt coalescing self-adaptive function updates the int_gl every
interrupt. The GL update rate is too faster to get a better new GL value.
This patch changes the GL update rate to every one hundred interrupts.
The GL update rate is defined by HNS3_INT_ADAPT_DOWN_START.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It may need more time for IMP handle some command, such as reset.
This patch enlarges the max time for cmd timeout.

Driver will check the IMP result every us, it may break through the
loop when get the right result. So not all command need the max time.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no module that is dependent on hclge or hclgevf's symbol,
but hns_enet need them to provide ops for it to run. When there is
a need to auto load the hns3 driver, the auto load will fail because
hclge or hclgevf is not loaded.

Hns_enet has already exported the pci table, so this patch exports
the pci table for hclge and hclgevf module too.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The vlan table in hardware is clear after PF/Core/IMP/Global
reset, which will cause vlan tagged packets not being received
problem.

This patch fixes it by restoring the vlan table after reset.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VF queue reset flow is different from PF queue reset flow.
VF driver should stop VF queue first, then send message to PF
and PF do the reset. PF should send a response to VF after
PF complete the queue reset, VF can initialize the queue hw
after get the response.
This patch fixes the VF queue reset flow as the correct step.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When changing the mtu, the max frame size also will be changed. The tx
buffer size and the rx buffer size to be allocated are determined by max
frame size. So when max frame size is changed, the tx buffer and rx buffer
need to be reallocated.

When the tc_num is changed, the tx buffer and rx buffer need to be
reallocated too. So calling set_mtu and buffer_alloc separately is better.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

top_hierarchy arg can be determined by comparing parent_resource_id to
DEVLINK_RESOURCE_ID_PARENT_TOP so it does not need to be a separate
argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add multipath tests for onlink flag: one test with onlink added to
both nexthops, then tests with onlink added to only 1 nexthop.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Raju Rangoju says:

====================
Add support for RDMA enhancements in cxgb4

Allocates the HW-resources and provide the necessary routines for the
upper layer driver (rdma/iw_cxgb4) to enable the RDMA SRQ support for
Chelsio adapters.

Advertise support for write with immediate work request
Advertise support for write with completion

v3: modified memory allocation as per Stefano's suggestion

v2: fixed the patching issues and also
    fixed the following based on review comments of Stefano Brivio
 - using kvzalloc instead of vzalloc
 - using #define instead of enum
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If FW supports RDMA WRITE_COMPLETION functionality, then advertise that
to the ULDs. This will be used by iw_cxgb4 to allow WRITE_COMPLETION
work requests.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If FW supports RDMA WRITE_WITH_IMMEDATE functionality, then advertise
that
to the ULDs. This will be used by iw_cxgb4 to allow WRITE_WITH_IMMEDIATE
work requests.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support to query FW for the HW SRQ table start/end, and
advertise that for ULDs.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- This patch adds support to initialise srq table and read srq entries
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Add srq table query cpl support for srq
- Add cpl_abort_req_rss6 and cpl_abort_rpl_rss6 structs.
- Add accessors, macros to get the SRQ IDX value.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: series with smaller improvements w/o functional changes

This series includes smaller improvements w/o intended functional changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In several places struct device is referenced by using &tp->pci_dev->dev.
Add helper tp_to_dev() to improve code readability.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changing the argument type to struct rtl8169_private * is more in line
with the other functions in the driver and it allows to reduce the code size.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changing the type of the first argument to struct rtl8169_private * is more
in line with the other functions in the driver and it allows to reduce the
code size.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace open-coded functionality with eth_mac_addr().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - avoid redundant multicast TT entries, by Linus Luessing

 - add netlink support for distributed arp table cache and multicast flags,
   by Linus Luessing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The netns deletion path does not need to wait for all net_devices
to be unregistered before dismantling rds_tcp state for the netns
(we are able to dismantle this state on module unload even when
all net_devices are active so there is no dependency here).

This patch removes code related to netdevice notifiers and
refactors all the code needed to dismantle rds_tcp state
into a ->exit callback for the pernet_operations used with
register_pernet_device().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a receive method to NETLINK_KOBJECT_UEVENT netlink sockets
to allow sending uevent messages into the network namespace the socket
belongs to.

Currently non-initial network namespaces are already isolated and don't
receive uevents. There are a number of cases where it is beneficial for a
sufficiently privileged userspace process to send a uevent into a network
namespace.

One such use case would be debugging and fuzzing of a piece of software
which listens and reacts to uevents. By running a copy of that software
inside a network namespace, specific uevents could then be presented to it.
More concretely, this would allow for easy testing of udevd/ueventd.

This will also allow some piece of software to run components inside a
separate network namespace and then effectively filter what that software
can receive. Some examples of software that do directly listen to uevents
and that we have in the past attempted to run inside a network namespace
are rbd (CEPH client) or the X server.

Implementation:
The implementation has been kept as simple as possible from the kernel's
perspective. Specifically, a simple input method uevent_net_rcv() is added
to NETLINK_KOBJECT_UEVENT sockets which completely reuses existing
af_netlink infrastructure and does neither add an additional netlink family
nor requires any user-visible changes.

For example, by using netlink_rcv_skb() we can make use of existing netlink
infrastructure to report back informative error messages to userspace.

Furthermore, this implementation does not introduce any overhead for
existing uevent generating codepaths. The struct netns got a new uevent
socket member that records the uevent socket associated with that network
namespace including its position in the uevent socket list. Since we record
the uevent socket for each network namespace in struct net we don't have to
walk the whole uevent socket list. Instead we can directly retrieve the
relevant uevent socket and send the message. At exit time we can now also
trivially remove the uevent socket from the uevent socket list. This keeps
the codepath very performant without introducing needless overhead and even
makes older codepaths faster.

Uevent sequence numbers are kept global. When a uevent message is sent to
another network namespace the implementation will simply increment the
global uevent sequence number and append it to the received uevent. This
has the advantage that the kernel will never need to parse the received
uevent message to replace any existing uevent sequence numbers. Instead it
is up to the userspace process to remove any existing uevent sequence
numbers in case the uevent message to be sent contains any.

Security:
In order for a caller to send uevent messages to a target network namespace
the caller must have CAP_SYS_ADMIN in the owning user namespace of the
target network namespace. Additionally, any received uevent message is
verified to not exceed size UEVENT_BUFFER_SIZE. This includes the space
needed to append the uevent sequence number.

Testing:
This patch has been tested and verified to work with the following udev
implementations:
1. CentOS 6 with udevd version 147
2. Debian Sid with systemd-udevd version 237
3. Android 7.1.1 with ueventd
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds struct uevent_sock to struct net. Since struct uevent_sock
records the position of the uevent socket in the uevent socket list we can
trivially remove it from the uevent socket list during cleanup. This speeds
up the old removal codepath.
Note, list_del() will hit __list_del_entry_valid() in its call chain which
will validate that the element is a member of the list. If it isn't it will
take care that the list is not modified.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations register and unregister sysctl.
Also, there is inet_frags_exit_net() called in exit method,
which has to be safe after a5600024 "net: Fix hlist
corruptions in inet_evict_bucket()".
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations register and unregister sysctl.
Also, there is inet_frags_exit_net() called in exit method,
which has to be safe after a5600024 "net: Fix hlist
corruptions in inet_evict_bucket()".
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations create and destroy /proc entries
and cancel per-net timer.

Also, there are unneed iterations over empty list of net
devices, since all net devices must be already moved
to init_net or unregistered by default_device_ops. This
already was mentioned here:

https://marc.info/?l=linux-can&m=150169589119335&w=2

So, it looks safe to make them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-03-21

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add a BPF hook for sendmsg and sendfile by reusing the ULP infrastructure
   and sockmap. Three helpers are added along with this, bpf_msg_apply_bytes(),
   bpf_msg_cork_bytes(), and bpf_msg_pull_data(). The first is used to tell
   for how many bytes the verdict should be applied to, the second to tell
   that x bytes need to be queued first to retrigger the BPF program for a
   verdict, and the third helper is mainly for the sendfile case to pull in
   data for making it private for reading and/or writing, from John.

2) Improve address to symbol resolution of user stack traces in BPF stackmap.
   Currently, the latter stores the address for each entry in the call trace,
   however to map these addresses to user space files, it is necessary to
   maintain the mapping from these virtual addresses to symbols in the binary
   which is not practical for system-wide profiling. Instead, this option for
   the stackmap rather stores the ELF build id and offset for the call trace
   entries, from Song.

3) Add support that allows BPF programs attached to perf events to read the
   address values recorded with the perf events. They are requested through
   PERF_SAMPLE_ADDR via perf_event_open(). Main motivation behind it is to
   support building memory or lock access profiling and tracing tools with
   the help of BPF, from Teng.

4) Several improvements to the tools/bpf/ Makefiles. The 'make bpf' in the
   tools directory does not provide the standard quiet output except for
   bpftool and it also does not respect specifying a build output directory.
   'make bpf_install' command neither respects specified destination nor
   prefix, all from Jiri. In addition, Jakub fixes several other minor issues
   in the Makefiles on top of that, e.g. fixing dependency paths, phony
   targets and more.

5) Various doc updates e.g. add a comment for BPF fs about reserved names
   to make the dentry lookup from there a bit more obvious, and a comment
   to the bpf_devel_QA file in order to explain the diff between native
   and bpf target clang usage with regards to pointer size, from Quentin
   and Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>