Skip to content

L
linux
Switch branch/tag
  1. 08 Jul, 2018 8 commits
    • Linus Torvalds's avatar
      Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · f5c926b9
      Linus Torvalds authored 
      Pull objtool fix from Thomas Gleixner:
 "A single fix for objtool to address a bug in handling the cold
  subfunction detection for aliased functions which was added recently.
  The bug causes objtool to enter an infinite loop"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Support GCC 8 '-fnoreorder-functions'
      f5c926b9
    • Linus Torvalds's avatar
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · 124b99fb
      Linus Torvalds authored 
      Pull crypto fixes from Herbert Xu:

 - add missing RETs in x86 aegis/morus

 - fix build error in arm speck

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86 - Add missing RETs
  crypto: arm/speck - fix building in Thumb2 mode
      124b99fb
    • Linus Torvalds's avatar
      Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · 70a2dc6a
      Linus Torvalds authored 
      Pull ext4 bugfixes from Ted Ts'o:
 "Bug fixes for ext4; most of which relate to vulnerabilities where a
  maliciously crafted file system image can result in a kernel OOPS or
  hang.

  At least one fix addresses an inline data bug could be triggered by
  userspace without the need of a crafted file system (although it does
  require that the inline data feature be enabled)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: check superblock mapped prior to committing
  ext4: add more mount time checks of the superblock
  ext4: add more inode number paranoia checks
  ext4: avoid running out of journal credits when appending to an inline file
  jbd2: don't mark block as modified if the handle is out of credits
  ext4: never move the system.data xattr out of the inode body
  ext4: clear i_data in ext4_inode_info when removing inline data
  ext4: include the illegal physical block in the bad map ext4_error msg
  ext4: verify the depth of extent tree in ext4_find_extent()
  ext4: only look at the bg_flags field if it is valid
  ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
  ext4: always check block group bounds in ext4_init_block_bitmap()
  ext4: always verify the magic number in xattr blocks
  ext4: add corruption check in ext4_xattr_set_entry()
  ext4: add warn_on_error mount option
      70a2dc6a
    • Linus Torvalds's avatar
      Merge tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 8979319f
      Linus Torvalds authored 
      Pull PCI fixes from Bjorn Helgaas:

 - Fix a use-after-free in the endpoint code (Dan Carpenter)

 - Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven)

 - Fix an nfp regression caused by a change in how we limit the number
   of VFs we can enable (Jakub Kicinski)

 - Fix failure path cleanup issues in the new R-Car gen3 PHY support
   (Marek Vasut)

 - Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc
   Guire)

* tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  nfp: stop limiting VFs to 0
  PCI/IOV: Reset total_VFs limit after detaching PF driver
  PCI: faraday: Add missing of_node_put()
  PCI: xilinx-nwl: Add missing of_node_put()
  PCI: xilinx: Add missing of_node_put()
  PCI: endpoint: Use after free in pci_epf_unregister_driver()
  PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
  PCI: rcar: Clean up PHY init on failure
  PCI: rcar: Shut the PHY down in failpath
      8979319f
    • Linus Torvalds's avatar
      Merge tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6 · b2d44d14
      Linus Torvalds authored 
      Pull cifs fixes from Steve French:
 "Five smb3/cifs fixes for stable (including for some leaks and memory
  overwrites) and also a few fixes for recent regressions in packet
  signing.

  Additional testing at the recent SMB3 test event, and some good work
  by Paulo and others spotted the issues fixed here. In addition to my
  xfstest runs on these, Aurelien and Stefano did additional test runs
  to verify this set"

* tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()
  cifs: Fix infinite loop when using hard mount option
  cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
  cifs: Fix memory leak in smb2_set_ea()
  cifs: fix SMB1 breakage
  cifs: Fix validation of signed data in smb2
  cifs: Fix validation of signed data in smb3+
  cifs: Fix use after free of a mid_q_entry
      b2d44d14
    • Linus Torvalds's avatar
      Merge tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping · 4f572efd
      Linus Torvalds authored 
      Pull dma-mapping fix from Christoph Hellwig:
 "Revert an incorrect dma-mapping commit for 4.18-rc"

* tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping:
  Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
      4f572efd
    • Linus Torvalds's avatar
      Merge tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma · 89ac2233
      Linus Torvalds authored 
      Pull dmaengine fixes from Vinod Koul:
 "We have few odd driver fixes and one email update change for you this
  time:

   - Driver fixes for k3dma (off by one), pl330 (burst residue
     granularity) and omap-dma (incorrect residue_granularity)

   - Sinan's email update"

* tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
  dmaengine: pl330: report BURST residue granularity
  MAINTAINERS: Update email-id of Sinan Kaya
  dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
      89ac2233
    • Linus Torvalds's avatar
      Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi · ea9561cf
      Linus Torvalds authored 
      Pull IPMI fixes from Corey Minyard:
 "A couple of small fixes: one to the BMC side of things that fixes an
  interrupt issue, and one oops fix if init fails in a certain way on
  the client driver"

* tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc: fix IRQ exception if the channel is not open
  ipmi: Cleanup oops on initialization failure
      ea9561cf
  3. 07 Jul, 2018 3 commits
  5. 06 Jul, 2018 9 commits
  7. 05 Jul, 2018 20 commits
    • Linus Torvalds's avatar
      Fix up non-directory creation in SGID directories · 0fa3ecd8
      Linus Torvalds authored 
      sgid directories have special semantics, making newly created files in
the directory belong to the group of the directory, and newly created
subdirectories will also become sgid.  This is historically used for
group-shared directories.

But group directories writable by non-group members should not imply
that such non-group members can magically join the group, so make sure
to clear the sgid bit on non-directories for non-members (but remember
that sgid without group execute means "mandatory locking", just to
confuse things even more).
Reported-by: default avatarJann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0fa3ecd8
    • Christoph Hellwig's avatar
      Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up... · 7ec916f8
      Christoph Hellwig authored 
      Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"

This commit may cause a less than required dma mask to be used for
some allocations, which apparently leads to module load failures for
iwlwifi sometimes.

This reverts commit d657c5c7.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reported-by: default avatarFabio Coatti <fabio.coatti@gmail.com>
Tested-by: default avatarFabio Coatti <fabio.coatti@gmail.com>
      7ec916f8
    • Stefano Brivio's avatar
      cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf() · 729c0c9d
      Stefano Brivio authored 
      smb{2,3}_create_lease_buf() store a lease key in the lease
context for later usage on a lease break.

In most paths, the key is currently sourced from data that
happens to be on the stack near local variables for oplock in
SMB2_open() callers, e.g. from open_shroot(), whereas
smb2_open_file() properly allocates space on its stack for it.

The address of those local variables holding the oplock is then
passed to create_lease_buf handlers via SMB2_open(), and 16
bytes near oplock are used. This causes a stack out-of-bounds
access as reported by KASAN on SMB2.1 and SMB3 mounts (first
out-of-bounds access is shown here):

[  111.528823] BUG: KASAN: stack-out-of-bounds in smb3_create_lease_buf+0x399/0x3b0 [cifs]
[  111.530815] Read of size 8 at addr ffff88010829f249 by task mount.cifs/985
[  111.532838] CPU: 3 PID: 985 Comm: mount.cifs Not tainted 4.18.0-rc3+ #91
[  111.534656] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  111.536838] Call Trace:
[  111.537528]  dump_stack+0xc2/0x16b
[  111.540890]  print_address_description+0x6a/0x270
[  111.542185]  kasan_report+0x258/0x380
[  111.544701]  smb3_create_lease_buf+0x399/0x3b0 [cifs]
[  111.546134]  SMB2_open+0x1ef8/0x4b70 [cifs]
[  111.575883]  open_shroot+0x339/0x550 [cifs]
[  111.591969]  smb3_qfs_tcon+0x32c/0x1e60 [cifs]
[  111.617405]  cifs_mount+0x4f3/0x2fc0 [cifs]
[  111.674332]  cifs_smb3_do_mount+0x263/0xf10 [cifs]
[  111.677915]  mount_fs+0x55/0x2b0
[  111.679504]  vfs_kern_mount.part.22+0xaa/0x430
[  111.684511]  do_mount+0xc40/0x2660
[  111.698301]  ksys_mount+0x80/0xd0
[  111.701541]  do_syscall_64+0x14e/0x4b0
[  111.711807]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  111.713665] RIP: 0033:0x7f372385b5fa
[  111.715311] Code: 48 8b 0d 99 78 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 66 78 2c 00 f7 d8 64 89 01 48
[  111.720330] RSP: 002b:00007ffff27049d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[  111.722601] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f372385b5fa
[  111.724842] RDX: 000055c2ecdc73b2 RSI: 000055c2ecdc73f9 RDI: 00007ffff270580f
[  111.727083] RBP: 00007ffff2705804 R08: 000055c2ee976060 R09: 0000000000001000
[  111.729319] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f3723f4d000
[  111.731615] R13: 000055c2ee976060 R14: 00007f3723f4f90f R15: 0000000000000000

[  111.735448] The buggy address belongs to the page:
[  111.737420] page:ffffea000420a7c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[  111.739890] flags: 0x17ffffc0000000()
[  111.741750] raw: 0017ffffc0000000 0000000000000000 dead000000000200 0000000000000000
[  111.744216] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[  111.746679] page dumped because: kasan: bad access detected

[  111.750482] Memory state around the buggy address:
[  111.752562]  ffff88010829f100: 00 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00
[  111.754991]  ffff88010829f180: 00 00 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
[  111.757401] >ffff88010829f200: 00 00 00 00 00 f1 f1 f1 f1 01 f2 f2 f2 f2 f2 f2
[  111.759801]                                               ^
[  111.762034]  ffff88010829f280: f2 02 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
[  111.764486]  ffff88010829f300: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  111.766913] ==================================================================

Lease keys are however already generated and stored in fid data
on open and create paths: pass them down to the lease context
creation handlers and use them.
Suggested-by: default avatarAurélien Aptel <aaptel@suse.com>
Reviewed-by: default avatarAurelien Aptel <aaptel@suse.com>
Fixes: b8c32dbb ("CIFS: Request SMB2.1 leases")
Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      729c0c9d
    • Paulo Alcantara's avatar
      cifs: Fix infinite loop when using hard mount option · 7ffbe655
      Paulo Alcantara authored 
      For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.

So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.

Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().

Here's an example of how to trigger that:

$ mount.cifs //foo/share /mnt/test -o
username=foo,password=foo,vers=1.0,hard

(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511

$ ps -aux -q 2511
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      2511  0.0  0.0  12892  1008 pts/0    S    12:24   0:00 stat -f
/mnt/test

$ kill -9 2511

(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      2511 83.2  0.0  12892  1008 pts/0    R    12:24  30:01 stat -f
/mnt/test

By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.
Signed-off-by: default avatarPaulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: default avatarAurelien Aptel <aaptel@suse.com>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      7ffbe655
    • Stefano Brivio's avatar
      cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting · f46ecbd9
      Stefano Brivio authored 
      A "small" CIFS buffer is not big enough in general to hold a
setacl request for SMB2, and we end up overflowing the buffer in
send_set_info(). For instance:

 # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl
 # touch /mnt/test/acltest
 # getcifsacl /mnt/test/acltest
 REVISION:0x1
 CONTROL:0x9004
 OWNER:S-1-5-21-2926364953-924364008-418108241-1000
 GROUP:S-1-22-2-1001
 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
 ACL:S-1-22-2-1001:ALLOWED/0x0/R
 ACL:S-1-22-2-1001:ALLOWED/0x0/R
 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
 ACL:S-1-1-0:ALLOWED/0x0/R
 # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest

this setacl will cause the following KASAN splat:

[  330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs]
[  330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012

[  330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2
[  330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  330.784395] Call Trace:
[  330.784789]  dump_stack+0xc2/0x16b
[  330.786777]  print_address_description+0x6a/0x270
[  330.787520]  kasan_report+0x258/0x380
[  330.788845]  memcpy+0x34/0x50
[  330.789369]  send_set_info+0x4dd/0xc20 [cifs]
[  330.799511]  SMB2_set_acl+0x76/0xa0 [cifs]
[  330.801395]  set_smb2_acl+0x7ac/0xf30 [cifs]
[  330.830888]  cifs_xattr_set+0x963/0xe40 [cifs]
[  330.840367]  __vfs_setxattr+0x84/0xb0
[  330.842060]  __vfs_setxattr_noperm+0xe6/0x370
[  330.843848]  vfs_setxattr+0xc2/0xd0
[  330.845519]  setxattr+0x258/0x320
[  330.859211]  path_setxattr+0x15b/0x1b0
[  330.864392]  __x64_sys_setxattr+0xc0/0x160
[  330.866133]  do_syscall_64+0x14e/0x4b0
[  330.876631]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  330.878503] RIP: 0033:0x7ff2e507db0a
[  330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48
[  330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc
[  330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a
[  330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818
[  330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4
[  330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007
[  330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550

[  330.901057] Allocated by task 1012:
[  330.902888]  kasan_kmalloc+0xa0/0xd0
[  330.904714]  kmem_cache_alloc+0xc8/0x1d0
[  330.906615]  mempool_alloc+0x11e/0x380
[  330.908496]  cifs_small_buf_get+0x35/0x60 [cifs]
[  330.910510]  smb2_plain_req_init+0x4a/0xd60 [cifs]
[  330.912551]  send_set_info+0x198/0xc20 [cifs]
[  330.914535]  SMB2_set_acl+0x76/0xa0 [cifs]
[  330.916465]  set_smb2_acl+0x7ac/0xf30 [cifs]
[  330.918453]  cifs_xattr_set+0x963/0xe40 [cifs]
[  330.920426]  __vfs_setxattr+0x84/0xb0
[  330.922284]  __vfs_setxattr_noperm+0xe6/0x370
[  330.924213]  vfs_setxattr+0xc2/0xd0
[  330.926008]  setxattr+0x258/0x320
[  330.927762]  path_setxattr+0x15b/0x1b0
[  330.929592]  __x64_sys_setxattr+0xc0/0x160
[  330.931459]  do_syscall_64+0x14e/0x4b0
[  330.933314]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  330.936843] Freed by task 0:
[  330.938588] (stack is not available)

[  330.941886] The buggy address belongs to the object at ffff88010d5e2800
 which belongs to the cache cifs_small_rq of size 448
[  330.946362] The buggy address is located 96 bytes inside of
 448-byte region [ffff88010d5e2800, ffff88010d5e29c0)
[  330.950722] The buggy address belongs to the page:
[  330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0
[  330.955665] flags: 0x17ffffc0008100(slab|head)
[  330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80
[  330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
[  330.963005] page dumped because: kasan: bad access detected

[  330.967039] Memory state around the buggy address:
[  330.969255]  ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  330.971833]  ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[  330.976956]                                            ^
[  330.979226]  ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  330.981755]  ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  330.984225] ==================================================================

Fix this by allocating a regular CIFS buffer in
smb2_plain_req_init() if the request command is SMB2_SET_INFO.
Reported-by: default avatarJianhong Yin <jiyin@redhat.com>
Fixes: 366ed846 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
Reviewed-and-tested-by: default avatarAurelien Aptel <aaptel@suse.com>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      f46ecbd9
    • Paulo Alcantara's avatar
      cifs: Fix memory leak in smb2_set_ea() · 6aa0c114
      Paulo Alcantara authored 
      This patch fixes a memory leak when doing a setxattr(2) in SMB2+.
Signed-off-by: default avatarPaulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
Reviewed-by: default avatarAurelien Aptel <aaptel@suse.com>
      6aa0c114
    • Ronnie Sahlberg's avatar
      cifs: fix SMB1 breakage · 81f39f95
      Ronnie Sahlberg authored 
      SMB1 mounting broke in commit 35e2cc1b
("cifs: Use correct packet length in SMB2_TRANSFORM header")
Fix it and also rename smb2_rqst_len to smb_rqst_len
to make it less unobvious that the function is also called from
CIFS/SMB1

Good job by Paulo reviewing and cleaning up Ronnie's original patch.
Signed-off-by: default avatarRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: default avatarPaulo Alcantara <palcantara@suse.de>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      81f39f95
    • Paulo Alcantara's avatar
      cifs: Fix validation of signed data in smb2 · 8de8c460
      Paulo Alcantara authored 
      Fixes: c713c877 ("cifs: push rfc1002 generation down the stack")

We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.

Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: default avatarPaulo Alcantara <palcantara@suse.de>
Reviewed-by: default avatarRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      8de8c460
    • Paulo Alcantara's avatar
      cifs: Fix validation of signed data in smb3+ · 27c32b49
      Paulo Alcantara authored 
      Fixes: c713c877 ("cifs: push rfc1002 generation down the stack")

We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.

Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: default avatarPaulo Alcantara <palcantara@suse.de>
Reviewed-by: default avatarRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      27c32b49
    • Lars Persson's avatar
      cifs: Fix use after free of a mid_q_entry · 696e420b
      Lars Persson authored 
      With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.

Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.

This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.

Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:

		if (server->large_buf)
			buf = server->bigbuf;

+		usleep_range(500, 4000);

		server->lstrp = jiffies;

To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarLars Persson <larper@axis.com>
Acked-by: default avatarPaulo Alcantara <palcantara@suse.de>
Reviewed-by: default avatarRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: default avatarPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      696e420b
    • Linus Torvalds's avatar
      autofs: rename 'autofs' module back to 'autofs4' · d02d21ea
      Linus Torvalds authored 
      It turns out that systemd has a bug: it wants to load the autofs module
early because of some initialization ordering with udev, and it doesn't
do that correctly.  Everywhere else it does the proper "look up module
name" that does the proper alias resolution, but in that early code, it
just uses a hardcoded "autofs4" for the module name.

The result of that is that as of commit a2225d93 ("autofs: remove
left-over autofs4 stubs"), you get

    systemd[1]: Failed to insert module 'autofs4': No such file or directory

in the system logs, and a lack of module loading.  All this despite the
fact that we had very clearly marked 'autofs4' as an alias for this
module.

What's so ridiculous about this is that literally everything else does
the module alias handling correctly, including really old versions of
systemd (that just used 'modprobe' to do this), and even all the other
systemd module loading code.

Only that special systemd early module load code is broken, hardcoding
the module names for not just 'autofs4', but also "ipv6", "unix",
"ip_tables" and "virtio_rng".  Very annoying.

Instead of creating an _additional_ separate compatibility 'autofs4'
module, just rely on the fact that everybody else gets this right, and
just call the module 'autofs4' for compatibility reasons, with 'autofs'
as the alias name.

That will allow the systemd people to fix their bugs, adding the proper
alias handling, and maybe even fix the name of the module to be just
"autofs" (so that they can _test_ the alias handling).  And eventually,
we can revert this silly compatibility hack.

See also

    https://github.com/systemd/systemd/issues/9501
    https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946

for the systemd bug reports upstream and in the Debian bug tracker
respectively.

Fixes: a2225d93 ("autofs: remove left-over autofs4 stubs")
Reported-by: default avatarBen Hutchings <ben@decadent.org.uk>
Reported-by: default avatarMichael Biebl <biebl@debian.org>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d02d21ea
    • Greg Hackmann's avatar
      arm64: remove no-op -p linker flag · 1a381d4a
      Greg Hackmann authored 
      Linking the ARM64 defconfig kernel with LLVM lld fails with the error:

  ld.lld: error: unknown argument: -p
  Makefile:1015: recipe for target 'vmlinux' failed

Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.

After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM.  binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored.  A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".

Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Reviewed-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: default avatarGreg Hackmann <ghackmann@google.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      1a381d4a
    • Linus Torvalds's avatar
      Merge tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 06c85639
      Linus Torvalds authored 
      Pull ACPI fixes from Rafael Wysocki:
 "These fix a recent ACPICA regression, fix a battery driver regression
  introduced during the 4.17 cycle and fix up the recently added support
  for the PPTT ACPI table.

  Specifics:

   - Revert part of a recent ACPICA regression fix that added leading
     newlines to ACPICA error messages and made the kernel log look
     broken (Rafael Wysocki).

   - Fix an ACPI battery driver regression introduced during the 4.17
     cycle due to incorrect error handling that made Thinkpad 13 laptops
     crash on boot (Jouke Witteveen).

   - Fix up the recently added PPTT ACPI table support by covering the
     case when a PPTT structure represents a processors group correctly
     (Sudeep Holla)"

* tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / battery: Safe unregistering of hooks
  ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
  ACPICA: Drop leading newlines from error messages
      06c85639
    • Linus Torvalds's avatar
      Merge tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 90dc8b65
      Linus Torvalds authored 
      Pull power management fixes from Rafael Wysocki:
 "These fix a PCI power management regression introduced during the 4.17
  cycle and fix up the recently added support for devices in multiple
  power domains.

  Specifics:

   - Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3)
     to avoid confusing the platform firmware which started to happen
     after a core power management regression fix that went in during
     the 4.17 cycle (Rafael Wysocki).

   - Fix up the recently added support for devices in multiple power
     domains by avoiding to power up the entire domain unnecessarily
     when attaching a device to it (Ulf Hansson)"

* tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: Don't power on at attach for the multi PM domain case
  PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
      90dc8b65
    • Linus Torvalds's avatar
      Merge tag 'riscv-for-linus-4.18-rc4' of... · b19b9282
      Linus Torvalds authored 
      Merge tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of fixes for the RISC-V port:

   - A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows
     modules that use these to load correctly.

   - The removal of of_platform_populate(), which is obselete.

   - The removal of irq-riscv-intc.h, which is obselete.

   - A fix to PTRACE_SETREGSET.

   - Fixes that allow the RV32I kernel to build (at least for Zong, I've
     got another patch on the mailing list that's necessary on my setup :)).

  I've just given these a defconfig build test"

* tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Fix PTRACE_SETREGSET bug.
  RISC-V: Don't include irq-riscv-intc.h
  riscv: remove unnecessary of_platform_populate call
  RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations
  RISC-V: Change variable type for 32-bit compatible
  RISC-V: Add definiion of extract symbol's index and type for 32-bit
  RISC-V: Select GENERIC_UCMPDI2 on RV32I
  RISC-V: Add conditional macro for zone of DMA32
      b19b9282
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu · 760885f2
      Linus Torvalds authored 
      Pull m68knommu fix from Greg Ungerer:
 "A single fix for breakage introduced in this merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: fix "bad page state" oops on ColdFire boot
      760885f2
    • Mikita Lipski's avatar
      drm/amd/display: add a check for display depth validity · 413ff0b9
      Mikita Lipski authored 
      [why]
HDMI 2.0 fails to validate 4K@60 timing with 10 bpc
[how]
Adding a helper function that would verify if the display depth
assigned would pass a bandwidth validation.
Drop the display depth by one level till calculated pixel clk
is lower than maximum TMDS clk.

Bugzilla: https://bugs.freedesktop.org/106959Tested-by: default avatarMike Lothian <mike@fireburn.co.uk>
Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
Signed-off-by: default avatarMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      413ff0b9
    • Mikita Lipski's avatar
      drm/amd/display: adding ycbcr420 pixel encoding for hdmi · a6311be8
      Mikita Lipski authored 
      [why]
HDMI EDID's VSDB contains spectial timings for specifically
YCbCr 4:2:0 colour space. In those cases we need to verify
if the mode provided is one of the special ones has to use
YCbCr 4:2:0 pixel encoding for display info.
[how]
Verify if the mode is using specific ycbcr420 colour space with
the help of DRM helper function and assign the mode to use
ycbcr420 pixel encoding.
Tested-by: default avatarMike Lothian <mike@fireburn.co.uk>
Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
Signed-off-by: default avatarMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      a6311be8
    • Rafael J. Wysocki's avatar
      Merge branches 'acpi-tables' and 'acpica' · df958569
      Rafael J. Wysocki authored 
      Merge ACPICA regression fix and a fix for the recently added PPTT
support.

* acpi-tables:
  ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set

* acpica:
  ACPICA: Drop leading newlines from error messages
      df958569
    • Rafael J. Wysocki's avatar
      Merge branch 'pm-pci' · 88b96088
      Rafael J. Wysocki authored 
      Merge a PCI power management regression fix.

* pm-pci:
  PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
      88b96088
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7