- 24 Oct, 2013 12 commits
-
-
Suzuki K. Poulose authored
Rename 'insn' and 'operand' structures to more canonical names to avoid conflicts. struct insn represents information about an instruction, including the mnemonics, format and opcode. struct operand represents the 'properties' and information on howto interpret the operand value and doesn't contain the value. We rename these structures for avoiding a global conflict. i.e, 1,$s/struct insn/struct s390_insn/g 1,$s/struct operand/struct s390_operand/g Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Same as for bitops: make use of the interlocked-access facility 1 instructions which allow to atomically update storage locations without a compare-and-swap loop. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Get rid of the own atomic_sub_return() implementation. Otherwise we can't make use of the interlocked-access facility 1 instructions for atomic_sub_return(), since there is no "load and subtract" instruction available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
When checking the insn address wether it is a kernel image or module address it should be an if-else-if statement not two independent if statements. This doesn't really fix a bug, but matches s390_free_insn_slot(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Currently we only set the -march compiler option if the kbuild system figured out that the compiler actually supports the selected architecture (cc-option test). In result this means that no -march compiler option is set when an unsupported cpu architecture of the current compiler is selected. The kernel compile will afterwards succeed but with the default architecture instead of the (unsupported) selected one. Change this behaviour, so compiles will fail if the compiler does not support the selected cpu architecture. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Make use of the interlocked-access facility 1 that got added with the z196 architecure. This facilility added new instructions which can atomically update a storage location without a compare-and-swap loop. E.g. setting a bit within a "long" can be done with a single instruction. The size of the kernel image gets ~30kb smaller. Considering that there are appr. 1900 bitops call sites this means that each one saves about 15-16 bytes per call site which is expected. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md bugfixes from Neil Brown: "Assorted md bug-fixes for 3.12. All tagged for -stable releases too" * tag 'md/3.12-fixes' of git://neil.brown.name/md: raid5: avoid finding "discard" stripe raid5: set bio bi_vcnt 0 for discard request md: avoid deadlock when md_set_badblocks. md: Fix skipping recovery for read-only arrays.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and one fix which may cause a hang because of request miscounting (sd)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] sd: call blk_pm_runtime_init before add_disk [SCSI] qla2xxx: Fix request queue null dereference. [SCSI] BusLogic: Fix an oops when intializing multimaster adapter
-
Shaohua Li authored
SCSI discard will damage discard stripe bio setting, eg, some fields are changed. If the stripe is reused very soon, we have wrong bios setting. We remove discard stripe from hash list, so next time the strip will be fully initialized. Suitable for backport to 3.7+. Cc: <stable@vger.kernel.org> (3.7+) Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
Shaohua Li authored
SCSI layer will add new payload for discard request. If two bios are merged to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse SCSI and cause oops. Suitable for backport to 3.7+ Cc: stable@vger.kernel.org (v3.7+) Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bian Yu authored
When operate harddisk and hit errors, md_set_badblocks is called after scsi_restart_operations which already disabled the irq. but md_set_badblocks will call write_sequnlock_irq and enable irq. so softirq can preempt the current thread and that may cause a deadlock. I think this situation should use write_sequnlock_irqsave/irqrestore instead. I met the situation and the call trace is below: [ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010 [ 638.921923] lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0 [ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37 [ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013 [ 638.927816] ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007 [ 638.929829] ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8 [ 638.931848] ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8 [ 638.933884] Call Trace: [ 638.935867] <IRQ> [<ffffffff8172ff85>] dump_stack+0x55/0x76 [ 638.937878] [<ffffffff81730030>] spin_dump+0x8a/0x8f [ 638.939861] [<ffffffff81730056>] spin_bug+0x21/0x26 [ 638.941836] [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0 [ 638.943801] [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80 [ 638.945747] [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0 [ 638.947672] [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50 [ 638.949595] [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0 [ 638.951504] [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0 [ 638.953388] [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140 [ 638.955248] [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90 [ 638.957116] [<ffffffff8104fddd>] __do_softirq+0xfd/0x330 [ 638.958987] [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.960861] [<ffffffff8174a5cc>] call_softirq+0x1c/0x30 [ 638.962724] [<ffffffff81004c7d>] do_softirq+0x8d/0xc0 [ 638.964565] [<ffffffff8105024e>] irq_exit+0x10e/0x150 [ 638.966390] [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60 [ 638.968223] [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80 [ 638.970079] <EOI> [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.971899] [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50 [ 638.973691] [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50 [ 638.975475] [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0 [ 638.977243] [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80 [ 638.978988] [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456] [ 638.980723] [<ffffffff811b5a1d>] bio_endio+0x1d/0x40 [ 638.982463] [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0 [ 638.984214] [<ffffffff81306b9f>] blk_update_request+0x7f/0x350 [ 638.985967] [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90 [ 638.987710] [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50 [ 638.989439] [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30 [ 638.991149] [<ffffffff81308746>] blk_peek_request+0x106/0x250 [ 638.992861] [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130 [ 638.994561] [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0 [ 638.996251] [<ffffffff813040a7>] __blk_run_queue+0x37/0x50 [ 638.997900] [<ffffffff813045af>] blk_run_queue+0x2f/0x50 [ 638.999553] [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0 [ 639.001185] [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40 [ 639.002798] [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200 [ 639.004391] [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0 [ 639.005996] [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0 [ 639.007600] [<ffffffff81072f6b>] kthread+0xdb/0xe0 [ 639.009205] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 [ 639.010821] [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0 [ 639.012437] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 This bug was introduce in commit 2e8ac303 (the first time rdev_set_badblock was call from interrupt context), so this patch is appropriate for 3.5 and subsequent kernels. Cc: <stable@vger.kernel.org> (3.5+) Signed-off-by: Bian Yu <bianyu@kedacom.com> Reviewed-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
Lukasz Dorau authored
Since: commit 7ceb17e8 md: Allow devices to be re-added to a read-only array. spares are activated on a read-only array. In case of raid1 and raid10 personalities it causes that not-in-sync devices are marked in-sync without checking if recovery has been finished. If a read-only array is degraded and one of its devices is not in-sync (because the array has been only partially recovered) recovery will be skipped. This patch adds checking if recovery has been finished before marking a device in-sync for raid1 and raid10 personalities. In case of raid5 personality such condition is already present (at raid5.c:6029). Bug was introduced in 3.10 and causes data corruption. Cc: stable@vger.kernel.org Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
- 23 Oct, 2013 9 commits
-
-
Aaron Lu authored
Sujit has found a race condition that would make q->nr_pending unbalanced, it occurs as Sujit explained: " sd_probe_async() -> add_disk() -> disk_add_event() -> schedule(disk_events_workfn) sd_revalidate_disk() blk_pm_runtime_init() return; Let's say the disk_events_workfn() calls sd_check_events() which tries to send test_unit_ready() and because of sd_revalidate_disk() trying to send another commands the test_unit_ready() might be re-queued as the tagged command queuing is disabled. So the race condition is - Thread 1 | Thread 2 sd_revalidate_disk() | sd_check_events() ...nr_pending = 0 as q->dev = NULL| scsi_queue_insert() blk_runtime_pm_init() | blk_pm_requeue_request() -> | nr_pending = -1 since | q->dev != NULL " The problem is, the test_unit_ready request doesn't get counted the first time it is queued, so the later decrement of q->nr_pending in blk_pm_requeue_request makes it unbalanced. Fix this by calling blk_pm_runtime_init before add_disk so that all requests initiated there will all be counted. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Reported-and-tested-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
If an invalid IOCB is returned on the response queue then the index into the request queue map could be invalid and could return to us a bogus value. This could cause us to try to deference an invalid pointer and cause an exception. If we encounter this condition, simply return as no context can be established for this response. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Several last minute bug fixes. Two of them are on the larger side for rc7, the dasd format patch for older storage devices and the store-clock-fast patch where we have been to optimistic with an optimization" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/time: correct use of store clock fast s390/vmlogrdr: fix array access in vmlogrdr_open() s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32() s390/dasd: check for availability of prefix command during format s390/mm,kvm: fix software dirty bits vs. kvm for old machines
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management fixes from Zhang Rui: "These includes several commits that are necessary to properly fix regression for TMU test MUX address setting after reset, for exynos thermal driver. Specifics: - fix a regression that the removal of setting a certain field at TMU configuration setting results in immediately shutdown after reset on Exynos4412 SoC. - revert a patch which tries to link the thermal_zone device and its hwmon node but breaks libsensors. - fix a deadlock/lockdep warning issue in x86_pkg_temp thermal driver, which can be reproduced on a buggy platform only. - fix ti-soc-thermal driver to fall back on bandgap reading when reading from PCB temperature sensor fails" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Revert "drivers: thermal: parent virtual hwmon with thermal zone" drivers: thermal: allow ti-soc-thermal run without pcb zone thermal: exynos: Provide initial setting for TMU's test MUX address at Exynos4412 thermal: exynos: Provide separate TMU data for Exynos4412 thermal: exynos: Remove check for thermal device pointer at exynos_report_trigger() Thermal: x86_pkg_temp: change spin lock
-
Randy Dunlap authored
Fix build error in asus_wmi.c when ASUS_WMI=y and ACPI_VIDEO=m by preventing that combination. drivers/built-in.o: In function `asus_wmi_probe': asus-wmi.c:(.text+0x65ddb4): undefined reference to `acpi_video_unregister' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - Compilation fixes for GCC < 4.4.6 - one Kbuild dependency select fix (selecting videobuf on msi3101) - driver fixes on tda10071, e4000, msi3101, soc_camera, s5p-jpeg, saa7134 and adv7511 - some device quirks needed to make them work properly - some videobuf2 core regression fixes for some features used only on embedded drivers * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] saa7134: Fix crash when device is closed before streamoff [media] adv7511: fix error return code in adv7511_probe() [media] ths8200: fix compilation with GCC < 4.4.6 [media] ad9389b: fix compilation with GCC < 4.4.6 [media] adv7511: fix compilation with GCC < 4.4.6 [media] adv7842: fix compilation with GCC < 4.4.6 [media] s5p-jpeg: Initialize vfd_decoder->vfl_dir field [media] videobuf2-dc: Fix support for mappings without struct page in userptr mode [media] vb2: Allow queuing OUTPUT buffers with zeroed 'bytesused' [media] mx3-camera: locking cleanup in mx3_videobuf_queue() [media] sh_vou: almost forever loop in sh_vou_try_fmt_vid_out() [media] tda10071: change firmware download condition [media] msi3101: correct max videobuf2 alloc [media] Add HCL T12Rg-H to STK webcam upside-down table [media] msi3101: Kconfig select VIDEOBUF2_VMALLOC [media] msi3101: msi3101_ioctl_ops can be static [media] e4000: fix PLL calc bug on 32-bit arch [media] uvcvideo: quirk PROBE_DEF for Microsoft Lifecam NX-3000 [media] uvcvideo: quirk PROBE_DEF for Dell SP2008WFP monitor
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull infiniband bugfix from Roland Dreier: "Disable not-quite-ready userspace ABI for IB flow steering" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Temporarily disable create_flow/destroy_flow uverbs
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...
-
- 22 Oct, 2013 15 commits
-
-
Freddy Xin authored
Add VID:DID for Samsung USB Ethernet Adapter. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Freddy Xin authored
Correct the definition of AX_RXHDR_CRC_ERR and AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr seperately. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2a. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mattia Dongili authored
Do not touch keyboard backlight unless explicitly passed a module parameter. In this way we won't make wrong assumptions about what are good default values since they actually are different from model to model. The only side effect is that we won't know what is the current value until set via the sysfs attributes. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Move kernel-doc notation to immediately before its function to eliminate kernel-doc warnings introduced by commit db14fc3a ("vfs: add d_walk()") Warning(fs/dcache.c:1343): No description found for parameter 'data' Warning(fs/dcache.c:1343): No description found for parameter 'dentry' Warning(fs/dcache.c:1343): Excess function parameter 'parent' description in 'check_mount' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Add @path parameter to fix kernel-doc warning. Also fix a spello/typo. Warning(fs/namei.c:2304): No description found for parameter 'path' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "The pending last-minute ASoC fixes, all of which are driver-local (tlv320aic3x, rcar, pcm1681, pcm1792a, omap, fsl) and should be pretty safe to apply" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: Add MAINTAINERS entry for dmaengine helpers ASoC: pcm1792a: Fix max_register setting ASoC: pcm1681: Fix max_register setting ASoC: pcm1681: Fix max_register setting ASoC: rcar: fixup generation checker ASoC: tlv320aic3x: Connect 'Left Line1R Mux' and 'Right Line1L Mux' ASoC: fsl: imx-ssi: fix probe on imx31 ASoC: omap: Fix incorrect ARM dependency ASoC: fsl: Fix sound on mx31moboard ASoC: fsl_ssi: Fix irq_of_parse_and_map() return value check
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull jfs bugfix from David Kleikamp: "Just a patch to fix an oops in an error path" * tag 'jfs-3.12' of git://github.com/kleikamp/linux-shaggy: jfs: fix error path in ialloc
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Travelling slowed down getting these out. Two vmwgfx fixes, a radeon revert to avoid a regression, i915 fixes, and some ioctl sizing issues fixed with 32 on 64" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/audio: don't set speaker allocation on DCE4+ drm/radeon: rework audio option drm/radeon/audio: don't set speaker allocation on DCE3.2 drm/radeon: make missing smc ucode non-fatal (CI) drm/radeon: make missing smc ucode non-fatal (r7xx-SI) drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3 drm/radeon: stop the leaks in cik_ib_test drm/radeon/atom: workaround vbios bug in transmitter table on rs780 drm/i915: Disable GGTT PTEs on GEN6+ suspend drm/i915: Make PTE valid encoding optional drm: Pad drm_mode_get_connector to 64-bit boundary drm: Prevent overwriting from userspace underallocating core ioctl structs drm/vmwgfx: Don't kill clients on VT switch drm/vmwgfx: Don't put resources with invalid id's on lru list drm/i915: disable LVDS clock gating on CPT v2
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - a partial revert of exponent parsing changes to make "Unit" exponent item work properly again, by Nikolai Kondrashov - a few new device IDs additions piggy-backing, by AceLan Kao and David Herrmann * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wiimote: add LEGO-wiimote VID HID: Fix unit exponent parsing again HID: usbhid: quirk for SiS Touchscreen HID: usbhid: quirk for Synaptics Large Touchccreen
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "The only interesting bit is ata_eh_qc_retry() update which fixes a problem where a SG_IO command may fail across suspend/resume cycle without the command actually being at fault. Other changes are low level driver specific and fairly low impact" * 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libahci: fix turning on LEDs in ahci_start_port() libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures ahci_platform: use dev_info() instead of printk() ahci: use dev_info() instead of printk() pata_isapnp: Don't use invalid I/O ports
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "Two late fixes for cgroup. One fixes descendant walk introduced during this rc1 cycle. The other fixes a post 3.9 bug during task attach which can lead to hang. Both fixes are critical and the fixes are relatively straight-forward" * 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix to break the while loop in cgroup_attach_task() correctly cgroup: fix cgroup post-order descendant walk of empty subtree
-
Martin Schwidefsky authored
The result of the store-clock-fast (STCKF) instruction is a bit fuzzy. It can happen that the value stored on one CPU is smaller than the value stored on another CPU, although the order of the stores is the other way around. This can cause deltas of get_tod_clock() values to become negative when they should not be. We need to be more careful with store-clock-fast, this patch partially reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time: always use stckf instead of stck if available". The get_tod_clock() function now uses the store-clock-extended (STCKE) instruction. get_tod_clock_fast() can be used if the fuzziness of store-clock-fast is acceptable e.g. for wait loops local to a CPU. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Most just regression fixes for audio, dpm, and uvd, plus a resource leak fix for cik. * 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/audio: don't set speaker allocation on DCE4+ drm/radeon: rework audio option drm/radeon/audio: don't set speaker allocation on DCE3.2 drm/radeon: make missing smc ucode non-fatal (CI) drm/radeon: make missing smc ucode non-fatal (r7xx-SI) drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3 drm/radeon: stop the leaks in cik_ib_test drm/radeon/atom: workaround vbios bug in transmitter table on rs780
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just an lvds clock gating fix and a pte clearing hack for hsw to avoid memory corruption when hibernating - something doesn't seem to switch off properly, we're still investigating. * tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel: (96 commits) drm/i915: Disable GGTT PTEs on GEN6+ suspend drm/i915: Make PTE valid encoding optional drm/i915: disable LVDS clock gating on CPT v2
-
- 21 Oct, 2013 4 commits
-
-
Neal Cardwell authored
For passive TCP connections, upon receiving the ACK that completes the 3WHS, make sure we set our pacing rate after we get our first RTT sample. On passive TCP connections, when we receive the ACK completing the 3WHS we do not take an RTT sample in tcp_ack(), but rather in tcp_synack_rtt_meas(). So upon receiving the ACK that completes the 3WHS, tcp_ack() leaves sk_pacing_rate at its initial value. Originally the initial sk_pacing_rate value was 0, so passive-side connections defaulted to sysctl_tcp_min_tso_segs (2 segs) in skbuffs made in the first RTT. With a default initial cwnd of 10 packets, this happened to be correct for RTTs 5ms or bigger, so it was hard to see problems in WAN or emulated WAN testing. Since 7eec4174 ("pkt_sched: fq: fix non TCP flows pacing"), the initial sk_pacing_rate is 0xffffffff. So after that change, passive TCP connections were keeping this value (and using large numbers of segments per skbuff) until receiving an ACK for data. Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mariusz Ceier authored
When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't, emac_dev_mcast_set should only enable RX of multicasts and reset MACHASH registers. It does this, but afterwards it either sets up multicast MACs filtering or disables RX of multicasts and resets MACHASH registers again, rendering IFF_ALLMULTI flag useless. This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set. Tested with kernel 2.6.37. Signed-off-by: Mariusz Ceier <mceier+kernel@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexandre Belloni authored
This has no other impact than a cosmetic one. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Routes need to be probed asynchronous otherwise the call stack gets exhausted when the kernel attemps to deliver another skb inline, like e.g. xt_TEE does, and we probe at the same time. We update neigh->updated still at once, otherwise we would send to many probes. Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-