Pull AFS fixes from David Howells:

 - Make AFS file locking work again.

 - Don't write to a page that's being written out, but wait for it to
   complete.

 - Do d_drop() and d_add() in the right places.

 - Put keys on error paths.

 - Remove some redundant code.

* tag 'afs-fixes-20171124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: remove redundant assignment of dvnode to itself
  afs: cell: Remove unnecessary code in afs_lookup_cell
  afs: Fix signal handling in some file ops
  afs: Fix some dentry handling in dir ops and missing key_puts
  afs: Make afs_write_begin() avoid writing to a page that's being stored
  afs: Fix file locking

Pull KVM updates from Radim Krčmář:
 "Trimmed second batch of KVM changes for Linux 4.15:

   - GICv4 Support for KVM/ARM

   - re-introduce support for CPUs without virtual NMI (cc stable) and
     allow testing of KVM without virtual NMI on available CPUs

   - fix long-standing performance issues with assigned devices on AMD
     (cc stable)"

* tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
  kvm: vmx: Allow disabling virtual NMI support
  kvm: vmx: Reinstate support for CPUs without virtual NMI
  KVM: SVM: obey guest PAT
  KVM: arm/arm64: Don't queue VLPIs on INV/INVALL
  KVM: arm/arm64: Fix GICv4 ITS initialization issues
  KVM: arm/arm64: GICv4: Theory of operations
  KVM: arm/arm64: GICv4: Enable VLPI support
  KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity
  KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved
  KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered
  KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync
  KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source
  KVM: arm/arm64: GICv4: Add doorbell interrupt handling
  KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint
  KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE
  KVM: arm/arm64: GICv4: Propagate property updates to VLPIs
  KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE
  KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI
  KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS
  KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI
  ...

Pull powerpc fixes from Michael Ellerman:
 "A small batch of fixes, about 50% tagged for stable and the rest for
  recently merged code.

  There's one more fix for the >128T handling on hash. Once a process
  had requested a single mmap above 128T we would then always search
  above 128T. The correct behaviour is to consider the hint address in
  isolation for each mmap request.

  Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in
  VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly
  identify P9 DD2.1 but in code that is currently not used by default.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan,
  Sukadev Bhattiprolu"

* tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features
  powerpc/perf: Fix IMC_MAX_PMU macro
  powerpc/perf: Fix pmu_count to count only nest imc pmus
  powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX
  powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id()
  powerpc/vas: Export chip_to_vas_id()
  powerpc/64s/slice: Use addr limit when computing slice mask

Pull SCSI target updates from Nicholas Bellinger:

 "This series is predominantly bug-fixes, with a few small improvements
  that have been outstanding over the last release cycle.

  As usual, the associated bug-fixes have CC' tags for stable.

  Also, things have been particularly quiet wrt new developments the
  last months, with most folks continuing to focus on stability atop 4.x
  stable kernels for their respective production configurations.

  Also at this point, the stable trees have been synced up with
  mainline. This will continue to be a priority, as production users
  tend to run exclusively atop stable kernels, a few releases behind
  mainline.

  The highlights include:

   - Fix PR PREEMPT_AND_ABORT null pointer dereference regression in
     v4.11+ (tangwenji)

   - Fix OOPs during removing TCMU device (Xiubo Li + Zhang Zhuoyu)

   - Add netlink command reply supported option for each device (Kenjiro
     Nakayama)

   - cxgbit: Abort the TCP connection in case of data out timeout (Varun
     Prakash)

   - Fix PR/ALUA file path truncation (David Disseldorp)

   - Fix double se_cmd completion during ->cmd_time_out (Mike Christie)

   - Fix QUEUE_FULL + SCSI task attribute handling in 4.1+ (Bryant Ly +
     nab)

   - Fix quiese during transport_write_pending_qf endless loop (nab)

   - Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK in 3.14+
     (Don White + nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (35 commits)
  tcmu: Add a missing unlock on an error path
  tcmu: Fix some memory corruption
  iscsi-target: Fix non-immediate TMR reference leak
  iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
  target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
  target: Fix quiese during transport_write_pending_qf endless loop
  target: Fix caw_sem leak in transport_generic_request_failure
  target: Fix QUEUE_FULL + SCSI task attribute handling
  iSCSI-target: Use common error handling code in iscsi_decode_text_input()
  target/iscsi: Detect conn_cmd_list corruption early
  target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
  target/iscsi: Modify iscsit_do_crypto_hash_buf() prototype
  target/iscsi: Fix endianness in an error message
  target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding it
  target/iscsi: Define OFFLOAD_BUF_SIZE once
  target: Inline transport_put_cmd()
  target: Suppress gcc 7 fallthrough warnings
  target: Move a declaration of a global variable into a header file
  tcmu: fix double se_cmd completion
  target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCES
  ...

The assignment of dvnode to itself is redundant and can be removed.
Cleans up warning detected by cppcheck:

fs/afs/dir.c:975: (warning) Redundant assignment of 'dvnode' to itself.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Due to recent changes this piece of code is no longer needed.

Addresses-Coverity-ID: 1462033
Link: https://lkml.kernel.org/r/4923.1510957307@warthog.procyon.org.ukSigned-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>

afs_mkdir(), afs_create(), afs_link() and afs_symlink() all need to drop
the target dentry if a signal causes the operation to be killed immediately
before we try to contact the server.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix some of dentry handling in AFS directory ops:

 (1) Do d_drop() on the new_dentry before assigning a new inode to it in
     afs_vnode_new_inode().  It's fine to do this before calling afs_iget()
     because the operation has taken place on the server.

 (2) Replace d_instantiate()/d_rehash() with d_add().

 (3) Don't d_drop() the new_dentry in afs_rename() on error.

Also fix afs_link() and afs_rename() to call key_put() on all error paths
where the key is taken.
Signed-off-by: David Howells <dhowells@redhat.com>

Make afs_write_begin() wait for a page that's marked PG_writeback because:

 (1) We need to avoid interference with the data being stored so that the
     data on the server ends up in a defined state.

 (2) page->private is used to track the window of dirty data within a page,
     but it's also used by the storage code to track what's being written,
     being cleared by the completion notification.  Ownership can't be
     relinquished by the storage code until completion because it a store
     fails, the data must be remarked dirty.

Tracing shows something like the following (edited):

 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-125
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store+ 0-125
 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-2052
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 clear 0-2052
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store 0-0
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 WARN 0-0

The clear (completion) corresponding to the store+ (store continuation from
a previous page) happens between the second begin (afs_write_begin) and the
store corresponding to that.  This results in the second store not seeing
any data to write back, leading to the following warning:

WARNING: CPU: 2 PID: 114 at ../fs/afs/write.c:403 afs_write_back_from_locked_page+0x19d/0x76c [kafs]
Modules linked in: kafs(E)
CPU: 2 PID: 114 Comm: kworker/u8:3 Tainted: G            E   4.14.0-fscache+ #242
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Workqueue: writeback wb_workfn (flush-afs-2)
task: ffff8800cad72600 task.stack: ffff8800cad44000
RIP: 0010:afs_write_back_from_locked_page+0x19d/0x76c [kafs]
RSP: 0018:ffff8800cad47aa0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff8800bef33a20 RCX: 0000000000000000
RDX: 000000000000000f RSI: ffffffff81c5d0e0 RDI: ffff8800cad72e78
RBP: ffff8800d31ea1e8 R08: ffff8800c1358000 R09: ffff8800ca00e400
R10: ffff8800cad47a38 R11: ffff8800c5d9e400 R12: 0000000000000000
R13: ffffea0002d9df00 R14: ffffffffa0023c1c R15: 0000000000007fdf
FS:  0000000000000000(0000) GS:ffff8800ca700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f85ac6c4000 CR3: 0000000001c10001 CR4: 00000000001606e0
Call Trace:
 ? clear_page_dirty_for_io+0x23a/0x267
 afs_writepages_region+0x1be/0x286 [kafs]
 afs_writepages+0x60/0x127 [kafs]
 do_writepages+0x36/0x70
 __writeback_single_inode+0x12f/0x635
 writeback_sb_inodes+0x2cc/0x452
 __writeback_inodes_wb+0x68/0x9f
 wb_writeback+0x208/0x470
 ? wb_workfn+0x22b/0x565
 wb_workfn+0x22b/0x565
 ? worker_thread+0x230/0x2ac
 process_one_work+0x2cc/0x517
 ? worker_thread+0x230/0x2ac
 worker_thread+0x1d4/0x2ac
 ? rescuer_thread+0x29b/0x29b
 kthread+0x15d/0x165
 ? kthread_create_on_node+0x3f/0x3f
 ? call_usermodehelper_exec_async+0x118/0x11f
 ret_from_fork+0x24/0x30
Signed-off-by: David Howells <dhowells@redhat.com>

Pull networking fixes from David Miller:

 1) Fix PCI IDs of 9000 series iwlwifi devices, from Luca Coelho.

 2) bpf offload bug fixes from Jakub Kicinski.

 3) Fix bpf verifier to NOP out code which is dead at run time because
    due to branch pruning the verifier will not explore such
    instructions. From Alexei Starovoitov.

 4) Fix crash when deleting secondary chains in packet scheduler
    classifier. From Roman Kapl.

 5) Fix buffer management bugs in smc, from Ursula Braun.

 6) Fix regression in anycast route handling, from David Ahern.

 7) Fix link settings regression in r8169, from Tobias Jakobi.

 8) Add back enough UFO support so that live migration still works, from
    Willem de Bruijn.

 9) Linearize enough packet data for the full extent to which the ipvlan
    code will inspect the packet headers, from Gao Feng.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  ipvlan: Fix insufficient skb linear check for ipv6 icmp
  ipvlan: Fix insufficient skb linear check for arp
  geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6
  net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY
  net: accept UFO datagrams from tuntap and packet
  net: realtek: r8169: implement set_link_ksettings()
  net: ipv6: Fixup device for anycast routes during copy
  net/smc: Fix preinitialization of buf_desc in __smc_buf_create()
  net/smc: use sk_rcvbuf as start for rmb creation
  ipv6: Do not consider linkdown nexthops during multipath
  net: sched: fix crash when deleting secondary chains
  net: phy: cortina: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
  bpf: fix branch pruning logic
  bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZERO
  bpf: change bpf_probe_read_str arg2 type to ARG_CONST_SIZE_OR_ZERO
  bpf: remove explicit handling of 0 for arg2 in bpf_probe_read
  bpf: introduce ARG_PTR_TO_MEM_OR_NULL
  i40evf: Use smp_rmb rather than read_barrier_depends
  fm10k: Use smp_rmb rather than read_barrier_depends
  igb: Use smp_rmb rather than read_barrier_depends
  ...

Pull x86 platform driver fixes from Darren Hart:
 "Fix two issues resulting from the dell-smbios refactoring and
  introduction of the dell-smbios-wmi dispatcher.

  The first ensures a proper error code is returned when kzalloc fails.

  The second avoids an issue in older Dell BIOS implementations which
  would fail if the more complex calls were made by limiting those
  platforms to the simple calls such as those used by the existing
  dell-laptop and dell-wmi drivers, preserving their functionality prior
  to the addition of the dell-smbios-wmi dispatcher"

* tag 'platform-drivers-x86-v4.15-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: dell-laptop: fix error return code in dell_init()
  platform/x86: dell-smbios-wmi: Disable userspace interface if missing hotfix

Pull SCSI fixes from James Bottomley:
 "Two basic fixes: one for the sparse problem with the blacklist flags
  and another for a hang forever in bnx2i"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: Use 'blist_flags_t' for scsi_devinfo flags
  scsi: bnx2fc: Fix hung task messages when a cleanup response is not received during abort

Pull sound fixes from Takashi Iwai:
 "All commits found here are small fixes for regression or stable:

   - PCM timestamp behavior fix that could be seen as a regression

   - Remove spurious WARN_ON() from ALSA timer 32bit compat ioctl

   - HD-audio HDMI/DP channel mapping fix for 32bit archs

   - Fix the previous fix for HD-audio initialization code

   - More hardening USB-audio against malicious USB descriptors

   - HD-audio quirks/fixes (Realtek codec, AMD controller)

   - Missing help text for the recent Intel SST kconfig change"

* tag 'sound-fix-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Add Raven PCI ID
  ALSA: hda/realtek - Fix ALC700 family no sound issue
  ALSA: hda - Fix yet remaining issue with vmaster 0dB initialization
  ALSA: usb-audio: Add sanity checks in v2 clock parsers
  ALSA: usb-audio: Fix potential zero-division at parsing FU
  ALSA: usb-audio: Fix potential out-of-bound access at parsing SU
  ALSA: usb-audio: Add sanity checks to FE parser
  ALSA: timer: Remove kernel warning at compat ioctl error paths
  ALSA: pcm: update tstamp only if audio_tstamp changed
  ALSA: hda/realtek: Add headset mic support for Intel NUC Skull Canyon
  ALSA: hda: Fix too short HDMI/DP chmap reporting
  ALSA: usb-audio: uac1: Invalidate ctl on interrupt
  ALSA: hda/realtek - Fix ALC275 no sound issue
  ASoC: Intel: Add help text for SND_SOC_INTEL_SST_TOPLEVEL

Pull more drm updates from Dave Airlie:
 "Fixes/cleanups for rc1, non-desktop flags for VR

   - remove the MSM dt-bindings file Rob managed to push in the previous
     pull.

   - add a property/edid quirk to denote HMD devices, I had these
     hanging around for a few weeks and Keith had done some work on
     them, they are fairly self contained and small, and only affect
     people using HTC Vive VR headsets so far.

   - amdgpu, tegra, tilcdc, fsl fixes

   - some imx-drm cleanups I missed, these seemed pretty small, and no
     reason to hold off.

  I have one TTM regression fix (fixes bochs-vga in qemu) sitting
  locally awaiting review I'll probably send that in a separate pull
  request tomorrow"

* tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits)
  dt-bindings: remove file that was added accidentally
  drm/edid: quirk HTC vive headset as non-desktop. [v2]
  drm/fb: add support for not enabling fbcon on non-desktop displays [v2]
  drm: add connector info/property for non-desktop displays [v2]
  drm/amdgpu: fix rmmod KCQ disable failed error
  drm/amdgpu: fix kernel hang when starting VNC server
  drm/amdgpu: don't skip attributes when powerplay is enabled
  drm/amd/pp: fix typecast error in powerplay.
  drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support
  drm/tegra: sor: Reimplement pad clock
  Revert "drm/radeon: dont switch vt on suspend"
  drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence
  drm/amd/powerplay: fix unfreeze level smc message for smu7
  drm/amdgpu:fix memleak
  drm/amdgpu:fix memleak in takedown
  drm/amd/pp: fix dpm randomly failed on Vega10
  drm/amdgpu: set f_mapping on exported DMA-bufs
  drm/amdgpu: Properly allocate VM invalidate eng v2
  drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
  drm/fsl-dcu: avoid disabling pixel clock twice on suspend
  ...

Pull documentation updates from Jonathan Corbet:
 "A few late-arriving docs updates that have no real reason to wait.

  There's a new "Co-Developed-by" tag described by Greg, and a build
  enhancement from Willy to generate docs warnings during a kernel build
  (but only when additional warnings have been requested in general)"

* tag 'docs-4.15-2' of git://git.lwn.net/linux:
  Add optional check for bad kernel-doc comments
  Documentation: fix profile= options in kernel-parameters.txt
  documentation/svga.txt: update outdated file
  kokr/memory-barriers.txt: Fix typo in paring example
  kokr/memory-barriers/txt: Replace uses of "transitive"
  Documentation/process: add Co-Developed-by: tag for patches with multiple authors

Pull keys update from James Morris:
 "There's nothing too controversial here:

   - Doc fix for keyctl_read().

   - time_t -> time64_t replacement.

   - Set the module licence on things to prevent tainting"

* 'next-keys' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  pkcs7: Set the module licence to prevent tainting
  security: keys: Replace time_t with time64_t for struct key_preparsed_payload
  security: keys: Replace time_t/timespec with time64_t
  KEYS: fix in-kernel documentation for keyctl_read()

Merge tag 'apparmor-pr-2017-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "No features this time, just minor cleanups and bug fixes.

  Cleanups:
   - fix spelling mistake: "resoure" -> "resource"
   - remove unused redundant variable stop
   - Fix bool initialization/comparison

  Bug Fixes:
   - initialized returned struct aa_perms
   - fix leak of null profile name if profile allocation fails
   - ensure that undecidable profile attachments fail
   - fix profile attachment for special unconfined profiles
   - fix locking when creating a new complain profile.
   - fix possible recursive lock warning in __aa_create_ns"

* tag 'apparmor-pr-2017-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix possible recursive lock warning in __aa_create_ns
  apparmor: fix locking when creating a new complain profile.
  apparmor: fix profile attachment for special unconfined profiles
  apparmor: ensure that undecidable profile attachments fail
  apparmor: fix leak of null profile name if profile allocation fails
  apparmor: remove unused redundant variable stop
  apparmor: Fix bool initialization/comparison
  apparmor: initialized returned struct aa_perms
  apparmor: fix spelling mistake: "resoure" -> "resource"

Merge tag 'keys-next-20171123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next-keys

Merge keys subsystem changes from David Howells, for v4.15.

Gao Feng says:

====================
ipvlan: Fix insufficient skb linear check

The current ipvlan codes use pskb_may_pull to get the skb linear header in
func ipvlan_get_L3_hdr, but the size isn't enough for arp and ipv6 icmp.
So it may access the unexpected momory in ipvlan_addr_lookup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to
make sure the skb header has enough linear room for ipv6 header. But it
would use the latter memory directly without linear check when it is icmp.
So it still may access the unepxected memory in ipvlan_addr_lookup.

Now invoke the pskb_may_pull again if it is ipv6 icmp.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to
make sure the skb header has enough linear room for arp header. But it
would access the arp payload in func ipvlan_addr_lookup. So it still may
access the unepxected memory.

Now use arp_hdr_len(port->dev) instead of the arp header as the param.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stefano pointed that configure or show UDP_ZERO_CSUM6_RX/TX info doesn't
make sense if we haven't enabled CONFIG_IPV6. Fix it by adding
if IS_ENABLED(CONFIG_IPV6) check.

Fixes: abe492b4 ("geneve: UDP checksum configuration via netlink")
Fixes: fd7eafd0 ("geneve: fix fill_info when link down")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.15

First set of fixes for 4.15. Most important here is the iwlwifi fix
for scan command firmware interface change.

ath10k

* fix CCMP-256, GCMP and GCMP-256 in raw mode, it was never working

wcn36xx

* fix device tree node search

iwlwifi

* fix a regression with firmware API change of scan cmd (introduced in
  firmware version 34)

* add a bunch of PCI IDs and fix configuration structs for A000 devices

* fix the exported firmware name strings for 9000 and A000 devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2017-11-21

This series contains fixes for igb/vf, ixgbe/vf, i40e/vf and fm10k.

Jake fixes a regression issue with older firmware, where we were using
the NVM lock to synchronize NVM reads for all devices and firmware
versions, yet this caused issues with older firmware prior to version
1.5.  Fixed this by only grabbing the lock for newer devices and firmware
version 1.5 or newer.

Zijie Pan fixes the calculation of the i40e VF MAC addresses, where it was
possible to increment to the next MAC entry without calling
i40e_add_mac_filter().

Amritha removes the upper limit of 64 queues on a channel VSI since the
upper bound is determined by the VSI's num_queue_pairs.

Filip fixes an issue during FLR resets, where should have been checking
for upcoming core reset and if so, just return with I40E_ERR_NOT_READY.

Alan fixes the notifying clients of l2 parameters by copying the
parameters to the client instance struct and re-organizes the priority
in which the client tasks fire so that if the flag for notifying l2
params is set, it will trigger before the client open task.  Also fixed
the promiscuous settings after reset for all the VSI's.

Brian King from IBM fixes an issue seen on Power systems which would
result in skb list corruption and eventual kernel oops.  Brian
provides the same fix for nearly all our drivers, to replace the
read_barrier_depends with smp_rmb() to ensure loads are ordered with
respect to the load of tx_buffer->next_to_watch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The PHY on BCM7278 has an additional bit that needs to be cleared:
IDDQ_GLOBAL_PWR, without doing this, the PHY remains stuck in reset out
of suspend/resume cycles.

Fixes: 0fe99338 ("net: dsa: bcm_sf2: Add support for BCM7278 integrated switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2017-11-23

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Several BPF offloading fixes, from Jakub. Among others:

    - Limit offload to cls_bpf and XDP program types only.
    - Move device validation into the driver and don't make
      any assumptions about the device in the classifier due
      to shared blocks semantics.
    - Don't pass offloaded XDP program into the driver when
      it should be run in native XDP instead. Offloaded ones
      are not JITed for the host in such cases.
    - Don't destroy device offload state when moved to
      another namespace.
    - Revert dumping offload info into user space for now,
      since ifindex alone is not sufficient. This will be
      redone properly for bpf-next tree.

2) Fix test_verifier to avoid using bpf_probe_write_user()
   helper in test cases, since it's dumping a warning into
   kernel log which may confuse users when only running tests.
   Switch to use bpf_trace_printk() instead, from Yonghong.

3) Several fixes for correcting ARG_CONST_SIZE_OR_ZERO semantics
   before it becomes uabi, from Gianluca. More specifically:

    - Add a type ARG_PTR_TO_MEM_OR_NULL that is used only
      by bpf_csum_diff(), where the argument is either a
      valid pointer or NULL. The subsequent ARG_CONST_SIZE_OR_ZERO
      then enforces a valid pointer in case of non-0 size
      or a valid pointer or NULL in case of size 0. Given
      that, the semantics for ARG_PTR_TO_MEM in combination
      with ARG_CONST_SIZE_OR_ZERO are now such that in case
      of size 0, the pointer must always be valid and cannot
      be NULL. This fix in semantics allows for bpf_probe_read()
      to drop the recently added size == 0 check in the helper
      that would become part of uabi otherwise once released.
      At the same time we can then fix bpf_probe_read_str() and
      bpf_perf_event_output() to use ARG_CONST_SIZE_OR_ZERO
      instead of ARG_CONST_SIZE in order to fix recently
      reported issues by Arnaldo et al, where LLVM optimizes
      two boundary checks into a single one for unknown
      variables where the verifier looses track of the variable
      bounds and thus rejects valid programs otherwise.

4) A fix for the verifier for the case when it detects
   comparison of two constants where the branch is guaranteed
   to not be taken at runtime. Verifier will rightfully prune
   the exploration of such paths, but we still pass the program
   to JITs, where they would complain about using reserved
   fields, etc. Track such dead instructions and sanitize
   them with mov r0,r0. Rejection is not possible since LLVM
   may generate them for valid C code and doesn't do as much
   data flow analysis as verifier. For bpf-next we might
   implement removal of such dead code and adjust branches
   instead. Fix from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tuntap and similar devices can inject GSO packets. Accept type
VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively.

Processes are expected to use feature negotiation such as TUNSETOFFLOAD
to detect supported offload types and refrain from injecting other
packets. This process breaks down with live migration: guest kernels
do not renegotiate flags, so destination hosts need to expose all
features that the source host does.

Partially revert the UFO removal from 182e0b6b~1..d9d30adf.
This patch introduces nearly(*) no new code to simplify verification.
It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP
insertion and software UFO segmentation.

It does not reinstate protocol stack support, hardware offload
(NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception
of VIRTIO_NET_HDR_GSO_UDP packets in tuntap.

To support SKB_GSO_UDP reappearing in the stack, also reinstate
logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD
by squashing in commit 93991221 ("net: skb_needs_check() removes
CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee6
("net: avoid skb_warn_bad_offload false positives on UFO").

(*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id,
ipv6_proxy_select_ident is changed to return a __be32 and this is
assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted
at the end of the enum to minimize code churn.

Tested
  Booted a v4.13 guest kernel with QEMU. On a host kernel before this
  patch `ethtool -k eth0` shows UFO disabled. After the patch, it is
  enabled, same as on a v4.13 host kernel.

  A UFO packet sent from the guest appears on the tap device:
    host:
      nc -l -p -u 8000 &
      tcpdump -n -i tap0

    guest:
      dd if=/dev/zero of=payload.txt bs=1 count=2000
      nc -u 192.16.1.1 8000 < payload.txt

  Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds,
  packets arriving fragmented:

    ./with_tap_pair.sh ./tap_send_ufo tap0 tap1
    (from https://github.com/wdebruij/kerneltools/tree/master/tests)

Changes
  v1 -> v2
    - simplified set_offload change (review comment)
    - documented test procedure

Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com>
Fixes: fb652fdf ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6fa1ba61 partially
implemented the new ethtool API, by replacing get_settings()
with get_link_ksettings(). This breaks ethtool, since the
userspace tool (according to the new API specs) never tries
the legacy set() call, when the new get() call succeeds.

All attempts to chance some setting from userspace result in:
> Cannot set new settings: Operation not supported

Implement the missing set() call.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian reported a breakage with anycast routes due to commit
4832c30d ("net: ipv6: put host and anycast routes on device with
address"). Prior to this commit anycast routes were added against the
loopback device causing repetitive route entries with no insight into
why they existed. e.g.:
  $ ip -6 ro ls  table local type anycast
  anycast 2001:db8:1:: dev lo proto kernel metric 0 pref medium
  anycast 2001:db8:2:: dev lo proto kernel metric 0 pref medium
  anycast fe80:: dev lo proto kernel metric 0 pref medium
  anycast fe80:: dev lo proto kernel metric 0 pref medium

The point of commit 4832c30d is to add the routes using the device
with the address which is causing the route to be added. e.g.,:
  $ ip -6 ro ls  table local type anycast
  anycast 2001:db8:1:: dev eth1 proto kernel metric 0 pref medium
  anycast 2001:db8:2:: dev eth2 proto kernel metric 0 pref medium
  anycast fe80:: dev eth2 proto kernel metric 0 pref medium
  anycast fe80:: dev eth1 proto kernel metric 0 pref medium

For traffic to work as it did before, the dst device needs to be switched
to the loopback when the copy is created similar to local routes.

Fixes: 4832c30d ("net: ipv6: put host and anycast routes on device with address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: fixes for smc buffer handling

here are 2 cleanup patches for smc buffer handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

With gcc-4.1.2:

    net/smc/smc_core.c: In function ‘__smc_buf_create’:
    net/smc/smc_core.c:567: warning: ‘bufsize’ may be used uninitialized in this function

Indeed, if the for-loop is never executed, bufsize is used
uninitialized.  In addition, buf_desc is stored for later use, while it
is still a NULL pointer.

Before, error handling was done by checking if buf_desc is non-NULL.
The cleanup changed this to an error check, but forgot to update the
preinitialization of buf_desc to an error pointer.

Update the preinitializatin of buf_desc to fix this.

Fixes: b33982c3 ("net/smc: cleanup function __smc_buf_create()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3e034725 ("net/smc: common functions for RMBs and send buffers")
merged handling of SMC receive and send buffers. It introduced sk_buf_size
as merged start value for size determination. But since sk_buf_size is not
used at all, sk_sndbuf is erroneously used as start for rmb creation.
This patch makes sure, sk_buf_size is really used as intended, and
sk_rcvbuf is used as start value for rmb creation.

Fixes: 3e034725 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the 'ignore_routes_with_linkdown' sysctl is set, we should not
consider linkdown nexthops during route lookup.

While the code correctly verifies that the initially selected route
('match') has a carrier, it does not perform the same check in the
subsequent multipath selection, resulting in a potential packet loss.

In case the chosen route does not have a carrier and the sysctl is set,
choose the initially selected route.

Fixes: 35103d11 ("net: ipv6 sysctl option to ignore routes when nexthop link is down")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

If you flush (delete) a filter chain other than chain 0 (such as when
deleting the device), the kernel may run into a use-after-free. The
chain refcount must not be decremented unless we are sure we are done
with the chain.

To reproduce the bug, run:
    ip link add dtest type dummy
    tc qdisc add dev dtest ingress
    tc filter add dev dtest chain 1  parent ffff: flower
    ip link del dtest

Introduced in: commit f93e1cdc ("net/sched: fix filter flushing"),
but unless you have KAsan or luck, you won't notice it until
commit 0dadc117 ("cls_flower: use tcf_exts_get_net() before call_rcu()")

Fixes: f93e1cdc ("net/sched: fix filter flushing")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Roman Kapl <code@rkapl.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/net/phy/cortina.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

when the verifier detects that register contains a runtime constant
and it's compared with another constant it will prune exploration
of the branch that is guaranteed not to be taken at runtime.
This is all correct, but malicious program may be constructed
in such a way that it always has a constant comparison and
the other branch is never taken under any conditions.
In this case such path through the program will not be explored
by the verifier. It won't be taken at run-time either, but since
all instructions are JITed the malicious program may cause JITs
to complain about using reserved fields, etc.
To fix the issue we have to track the instructions explored by
the verifier and sanitize instructions that are dead at run time
with NOPs. We cannot reject such dead code, since llvm generates
it for valid C code, since it doesn't do as much data flow
analysis as the verifier does.

Fixes: 17a52670 ("bpf: verifier (add verifier core)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit adds PCI ID for Raven platform
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It maybe the typo for ALC700 support patch.
To fix the bit value on this patch.

Fixes: 6fbae35a ("ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'pwm/for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The changes for this release include power management improvements for
  the pwm-img driver, support for the backup mode on pwm-atmel-tcb as
  well as support for more hardware with the R-Car and Mediatek drivers.

  To round things off there's a bit of cleanup for sunxi and stm32-lp"

* tag 'pwm/for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: stm32-lp: Remove pwm_is_enabled() check before calling pwm_disable()
  pwm: mediatek: Add MT2712/MT7622 support
  pwm: sunxi: Use of_device_get_match_data()
  pwm: atmel-tcb: Support backup mode
  dt-bindings: pwm: Add R-Car D3 device tree bindings
  pwm: img: Add runtime PM
  pwm: img: Add suspend / resume handling

Pull RTC updates from Alexandre Belloni:
 "There is nothing scary this cycle, mostly driver fixes and updates.

  The core fix has been in for a while and has been tested on multiple
  kernel revisions by multiple teams.

  Core:
   - Fix setting the alarm to the next expiring timer

  New drivers:
   - Mediatek MT7622 RTC
   - NXP PCF85363
   - Spreadtrum SC27xx PMIC RTC

  Drivers updates:
   - Use generic nvmem to expose the Non volatile ram for ds1305,
     ds1511, m48t86 and omap
   - abx80x: solve possible race condition at probe
   - armada38x: support trimming the RTC oscillator
   - at91rm9200: fix reading the alarm value at boot
   - ds1511: allow waking platform
   - m41t80: rework square wave output
   - pcf8523: support trimming the RTC oscillator
   - pcf8563: fix clock output rate
   - pl031: make interrupt optional
   - xgene: fix suspend/resume"

* tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  dt-bindings: rtc: imxdi: Improve the bindings text
  rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
  dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation
  rtc: at91rm9200: fix reading alarm value
  rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
  rtc: sysfs: Use time64_t variables to set time/alarm
  rtc: xgene: mark PM functions as __maybe_unused
  rtc: xgene: Fix suspend/resume
  rtc: pcf8563: don't alway enable the alarm
  rtc: pcf8563: fix output clock rate
  rtc: rx8010: Fix for incorrect return value
  rtc: rx8010: Specify correct address for RX8010_RESV31
  rtc: rx8010: Remove duplicate define
  rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
  rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
  rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
  rtc: m41t80: fix m41t80_sqw_round_rate return value
  rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
  rtc: add support for NXP PCF85363 real-time clock
  rtc: omap: Support scratch registers
  ...