- 04 Dec, 2014 6 commits
-
-
Laurent Pinchart authored
The vb2_fop_poll() implementation tries to be clever on whether it needs to lock the queue mutex by checking whether polling might start fileio. The test requires reading the q->num_buffer field, which is racy if we don't hold the queue mutex in the first place. Remove the extra cleverness and just lock the mutex. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
Add support for selection target V4L2_SEL_TGT_NATIVE_SIZE. It is equivalent of what V4L2_SEL_TGT_CROP_BOUNDS used to be. Support for V4L2_SEL_TGT_CROP_BOUNDS is still supported by the driver as a compatibility interface. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Sakari Ailus authored
The fields were previously uninitialised, leaving the returned values to where the user had set them. This was never the intention. Signed-off-by:
-
Sakari Ailus authored
Add input and output capability flags for setting native size of the device, and document them. Signed-off-by:
-
Sakari Ailus authored
The V4L2_SEL_TGT_NATIVE_SIZE target is used to denote e.g. the size of a sensor's pixel array. Signed-off-by:
-
Sakari Ailus authored
The sub-device format documentation documented scaling configuration through formats. Instead the compose selection rectangle is elsewhere documented to be used for the purpose. Remove scaling related part of the documentation. Signed-off-by:
-
- 02 Dec, 2014 16 commits
-
-
Hans Verkuil authored
When compiling under COMPILE_TEST on a x86_64 the following warnings appear: drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_uservirt_to_phys': drivers/media/platform/omap/omap_vout.c:209:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] return virt_to_phys((void *) virtp); ^ drivers/media/platform/omap/omap_vout.c: In function 'omapvid_setup_overlay': drivers/media/platform/omap/omap_vout.c:420:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, ^ drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_buffer_prepare': drivers/media/platform/omap/omap_vout.c:794:34: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] vout->queued_buf_addr[vb->i] = (u8 *) ^ In file included from arch/x86/include/asm/dma-mapping.h:44:0, from include/linux/dma-mapping.h:82, from drivers/media/platform/omap/omap_vout.c:40: drivers/media/platform/omap/omap_vout.c:803:58: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr, ^ include/asm-generic/dma-mapping-common.h:174:60: note: in definition of macro 'dma_map_single' #define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL) ^ These are fixed by this patch. Signed-off-by: -
Prabhakar Lad authored
This patch adds support in the capture driver for using vb2_ops_wait_prepare/finish() helpers provided by the vb2 core. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Prabhakar Lad authored
This patch drops driver specific wait_prepare() and wait_finish() callbacks from vb2_ops and instead uses the the helpers vb2_ops_wait_prepare/finish() provided by the vb2 core, the lock member of the queue needs to be initalized to a mutex so that vb2 helpers vb2_ops_wait_prepare/finish() can make use of it. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Prabhakar Lad authored
This patch drops driver specific wait_prepare() and wait_finish() callbacks from vb2_ops and instead uses the the helpers vb2_ops_wait_prepare/finish() provided by the vb2 core, the lock member of the queue needs to be initalized to a mutex so that vb2 helpers vb2_ops_wait_prepare/finish() can make use of it. Signed-off-by:
-
Markus Elfring authored
The vb2_put_vma() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. In addition, remove the CAPTURE and OUTPUT caps for M2M devices. These were already slated for removal, so it's time to do so. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Acked-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by:
-
Hans Verkuil authored
Querycap should set the device_caps field. Signed-off-by:
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by:
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by:
-
Hans Verkuil authored
This was missing in this driver, so add this functionality. Signed-off-by:
-
Hans Verkuil authored
Add support for YCbCr output and support setting colorspace, YCbCr encoding and quantization for the AVI InfoFrame. Signed-off-by:
-
Hans Verkuil authored
Implement controls to set the YCbCr encoding and the quantization range for the colorspace. Signed-off-by:
-
Hans Verkuil authored
Add AdobeRGB and BT.2020 support. The colorspace control now orders the colorspaces according to how often they are used. So rarely used colorspaces are moved to the end. This makes it more logical when testing colorspace support. Signed-off-by:
-
Hans Verkuil authored
Add support for the new AdobeRGB and BT.2020 colorspaces. Also support explicit Y'CbCr and quantization settings. Signed-off-by:
-
Hans Verkuil authored
This extends the precalculated tpg_csc_colors matrix with AdobeRGB and BT.2020 colorspace support. It also adds two precalculated tables that convert between linear RGB and non-linear Rec.709 R'G'B' values, i.e. the Rec. 709 transfer function. This is needed to efficiently handle the BT.2020 Constant Luminance Yc'CbcCrc encoding and decoding. Signed-off-by:
-
- 01 Dec, 2014 4 commits
-
-
Hans Verkuil authored
The colorspace chapter in the V4L2 Specification was always poorly written. This patch rewrites it, documenting the new Y'CbCr encoding and quantization defines and going into much more detail with respect to how colorspaces are used and what it all means. Signed-off-by:
-
Hans Verkuil authored
Log the new ycbcr_enc and quantization fields. Note that it now also logs the flags field for the multiplanar buffer type. This was forgotten when the flags field was added. Signed-off-by:
-
Hans Verkuil authored
Add and copy the new ycbcr_enc and quantization fields. Signed-off-by:
-
Hans Verkuil authored
Add support for the new AdobeRGB and BT.2020 colorspaces as needed for HDMI 2.0. Add support to specify the Y'CbCr encoding and quantization range explicitly. Signed-off-by:
-
- 26 Nov, 2014 5 commits
-
-
Beniamino Galvani authored
This adds a node for the IR remote control receiver to the Amlogic Meson DTS. Signed-off-by:
Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
-
Beniamino Galvani authored
Amlogic Meson SoCs include a infrared remote control receiver that can operate in two modes: "NEC" mode in which the hardware decodes frames using the NEC IR protocol, and "general" mode in which the receiver simply reports the duration of pulses and spaces for software decoding. This is a driver for the IR receiver that implements software decoding of received frames. Signed-off-by:
Carlo Caione <carlo@caione.org> Signed-off-by:
-
Beniamino Galvani authored
This adds binding documentation for the infrared remote control receiver available in Amlogic Meson SoCs. Signed-off-by:
-
Mauro Carvalho Chehab authored
This causes lots of errors, because of sub-arch specific dependencies: All error/warnings: >> ERROR: "omapdss_compat_init" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_overlay_manager" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_num_overlay_managers" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_overlay" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omapdss_is_initialized" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dispc_register_isr" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omapdss_get_version" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_put_device" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_next_device" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dispc_unregister_isr" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omapdss_compat_uninit" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_device" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_num_overlays" [drivers/media/platform/omap/omap-vout.ko] undefined! Signed-off-by: -
Mauro Carvalho Chehab authored
According with Malcolm, the missing breaks are intentional. So, let's revert commit d442b15f, add some comments to document it and fix the two smatch warnings: drivers/media/usb/dvb-usb-v2/lmedm04.c:828 lme_firmware_switch() warn: missing break? reassigning 'st->dvb_usb_lme2510_firmware' drivers/media/usb/dvb-usb-v2/lmedm04.c:850 lme_firmware_switch() warn: missing break? reassigning 'st->dvb_usb_lme2510_firmware' using a different strategy to avoid reassign values to st->dvb_usb_lme2510_firmware. Acked-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
- 25 Nov, 2014 9 commits
-
-
Markus Elfring authored
The rc_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Josh Wu authored
Add SVGA, UXGA and XGA size definitions to v4l2-image-sizes.h. The definitions are sorted by alphabet order. Signed-off-by:
Josh Wu <josh.wu@atmel.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Paul Bolle authored
Commit 38a07311 ("[media] omap: be sure that MMU is there for COMPILE_TEST") added a dependency on HAS_MMU. There's no Kconfig symbol HAS_MMU. Use MMU instead. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Shuah Khan authored
au0828 IR stop and poll routines continue to access device while usb disconnect is in progress. There is small window between device disconnect and usb interface is set to null. This results in filling the log with several of the following error messages. Fix it to detect device disconnect condition and avoid device access. Nov 20 18:58:02 anduin kernel: [ 102.949819] au0828: au0828_usb_disconnect() Nov 20 18:58:02 anduin kernel: [ 102.950046] au0828: send_control_msg() Failed sending control message, error -71. Nov 20 18:58:02 anduin kernel: [ 102.950052] au0828: send_control_msg() Failed sending control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950056] au0828: send_control_msg() Failed sending control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950061] au0828: send_control_msg() Failed sending control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950065] au0828: recv_control_msg() Failed receiving control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950069] au0828: recv_control_msg() Failed receiving control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950072] au0828: recv_control_msg() Failed receiving control message, error -19. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Markus Elfring authored
GIT_AUTHOR_DATE=1416486805 The functions pvr2_hdw_destroy(), rc_unregister_device() and vfree() perform also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The functions i2c_put_adapter() and release_firmware() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The functions input_free_device() and rc_close() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The rc_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The dvb_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
