- 16 Mar, 2015 5 commits
-
-
Marcel Holtmann authored
The LE Secure Connections Confirmation Value and LE Secure Connections Random Value contants are required for the out-of-band data and so just define them. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Every Bluetooth Low Energy controller requires a local crypto context to handle the resolvable private addresses. At the moment this is just a single crypto context, but for out-of-band data generation it will require an additional. To facility this, create a struct smp_dev that will hold all the extra information. This patch is just the refactoring in preparation for future changes. Signed-off-by:
-
Marcel Holtmann authored
Within the security manager, it makes sense to use kzfree instead of kfree for all data structures. This ensures that no key material leaks by accident. Signed-off-by:
-
Marcel Holtmann authored
The HCI_CONN_REMOTE_OOB connection flag is used to indicate if the pairing initiator has provided out-of-band data. However since that value is no longer used in any decision making, just remove it. It is actually unclear what purpose the OOB data present field from the HCI IO Capability Response event serves in the first place. If either side provided out-of-band data, then that data will be used for pairing. Signed-off-by:
-
Marcel Holtmann authored
When only the pairing initiator is providing out-of-band data, then the receiver side was ignoring the data. For some reason the code was checking if the initiator has received out-of-band data and only then also provide the required inidication that the acceptor actually has the needed data available. For BR/EDR out-of-band pairing it is enough if one side has received out-of-band data. There are no extra checks needed here to make this work smoothly. The only thing that is needed is to tell the controller if data is present (and if it is P-192 or P-256 or both) and then let the controller actually figure out the rest. This means the check for outgoing connection or if the initiator has indicated data are completely pointless and are in fact actually causing harm. The check in question is this one: if (conn->out || test_bit(HCI_CONN_REMOTE_OOB, &conn->flags)) { After just taking the conditional check out and always executing the code for determining the type of out-of-band data, the pairing works flawlessly and prodcudes authenticated link keys. The patch itself looks more complicated due to the reformatting of the indentation, but it essentially just a two-line change. Signed-off-by:
-
- 15 Mar, 2015 18 commits
-
-
Marcel Holtmann authored
This adds support for the simplest possible version of Read Local OOB Extended Data management command. It includes all mandatory fields, but none of the actual pairing related ones. Signed-off-by:
-
Marcel Holtmann authored
The OOB data requires to include LE Bluetooth Device Address and LE Role and so add the type constants for these fields. Signed-off-by:
-
Marcel Holtmann authored
The eir_append_data helper function is needed for generating the extended local OOB data fields. So move it up into the right location. Signed-off-by:
-
Marcel Holtmann authored
This adds support for the simplest possible version of Read Advertising Features management command. It allows basic testing of the interface. Signed-off-by:
-
Marcel Holtmann authored
The flags for the management command table used manual encoding of bits in the form of (1 << n). It is however preferred to use BIT(n) macro instead. Signed-off-by:
-
Marcel Holtmann authored
Changes to the global configuration updates like settings, class of device, name etc. can be received by every user. They are allowed to read them in the first place so provide the updates via events as well. Otherwise untrusted users start polling for updates and that is not a desired behavior. Signed-off-by:
-
Marcel Holtmann authored
Until now the management interface was restricted to CAP_NET_ADMIN. With this change every user can open the management socket. However the list of commands is heavily restricted to getting basic information about the attached controllers. No access for configuration or other operation is provided. The events are also limited. This is done so that no keys can leak or untrusted users can mess with the Bluetooth configuration. Signed-off-by:
-
Marcel Holtmann authored
Check the required trust level of each management command with the trust level of the management socket. If it does not match up, then return the newly introduced permission denied error. Signed-off-by:
-
Marcel Holtmann authored
The flags field for the management command table will be always initialized to zero and thus no need to do that manually. Signed-off-by:
-
Marcel Holtmann authored
Some management commands are safe to be accessed from any user without special permissions. First step for allowing access to any of these commands from untrusted application is to mark them accordingly. Signed-off-by:
-
Marcel Holtmann authored
The management interface will need access to the socket flags and so provide a helper function for checking them. Signed-off-by:
-
Marcel Holtmann authored
With the introduction of trusted socket flag for control and monitor channels, it is now possible to use a single function for sending packets to these sockets. And with that consolidate the handling. Signed-off-by:
-
Marcel Holtmann authored
Providing a global trusted flag for management control sockets provides an easy way for identifying sockets and imposing restriction on it. For now all management sockets are trusted since they require CAP_NET_ADMIN. Signed-off-by:
-
Marcel Holtmann authored
The Read Extended Contoller Index List command can be used for retrieving the complete list of local available controllers. This included configured, unconfigured and also AMP controllers. Signed-off-by:
-
Marcel Holtmann authored
This introduces support for using Extended Index Added and Extended Index Removed events. These events contain the controller type and also the hardware bus information from the driver. Signed-off-by:
-
Marcel Holtmann authored
For sending Index Added, Index Removed, Unconfigured Index Added and Unconfigured Index Removed managment events the new helper functions allows taking into account if these events are enabled for a certain management socket or not. Signed-off-by:
-
Marcel Holtmann authored
The hci_send_to_flagged_channel helper function can be used to send packets to all channels that have a certain HCI socket flag set. This is especially useful for managment events that are limited to sockets that have first enabled certain functionality. This allows for filtering of events without confusing existing users. Signed-off-by:
-
Marcel Holtmann authored
To filter out certain actions for certain HCI sockets introcuce a flags field that allows to configure specific settings on individual sockets. Since the hci_pinfo structure is private in hci_sock.c, provide helper functions for setting and clearing a given flag. Signed-off-by:
-
- 14 Mar, 2015 17 commits
-
-
Florian Fainelli authored
Commit cd28a1a9 ("net: dsa: fully divert PHY reads/writes if requested") introduced a check for particular PHYs that need to be accessed using the slave MII bus created by DSA, but this check was too inclusive. This would prevent fixed PHYs from being successfully registered because those should not go through the slave MII bus created by DSA. Make sure we check that the PHY is not a fixed PHY to prevent that from happening. Fixes: cd28a1a9 ("net: dsa: fully divert PHY reads/writes if requested") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-03-13 This series contains updates to ixgbe and ixgbevf. Don adds additional support for X550 MAC types, which require additional steps around enabling and disabling Rx. Also cleans up variable type inconsistency. I provide a patch to allow relaxed ordering to be enabled on SPARC architectures. Also cleans up ixgbevf whitespace and code comments to align the driver with networking coding standard. Lastly cleaned up uses of memcpy() where ether_addr_copy() could have been used. Alex removes some dead code in the ixgbe cleanup patch. ==================== Signed-off-by: -
David S. Miller authored
Eric Dumazet says: ==================== inet: tcp listener refactoring, part 9 This preliminary work pushes socket convergence a bit more: 1) request sock ir_iif is universally set 2) inet_diag can use common helpers to reduce LOC ==================== Signed-off-by: -
Eric Dumazet authored
Now the three type of sockets share a common base, we can factorize code in inet_diag_msg_common_fill(). inet_diag_entry no longer requires saddr_storage & daddr_storage and the extra copies. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
inet_sk_diag_fill() only copes with non timewait and non request socks Signed-off-by:
-
Eric Dumazet authored
Once request socks will be in ehash table, they will need to have a valid ir_iff field. This is currently true only for IPv6. This patch extends support for IPv4 as well. This means inet_diag_fill_req() can now properly use ir_iif, which is better for IPv6 link locals anyway, as request sockets and established sockets will propagate consistent netlink idiag_if. Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: some optimizations and impovements The commits in this series contain some relatively simple changes that lead to better throughput across TIPC connections. We also make changes to the implementation of link transmission queueing and priority handling, in order to make the code more comprehensible and maintainable. v2: Commit #2: Redesigned tipc_msg_validate() to use pskb_may_pull(), as per feedback from David Miller. Commit #3: Some cosmetic changes to tipc_msg_extract(). I tried to replace the unconditional skb_linearize() with calls to pskb_may_pull() at selected locations, but I gave up. First, skb_trim() requires a fully linearized buffer. Second, it doesn't make much sense; the whole buffer will end up linearized, one way or another. ==================== Signed-off-by: -
Jon Paul Maloy authored
Messages transferred by TIPC are assigned an "importance priority", -an integer value indicating how to treat the message when there is link or destination socket congestion. There is no separate header field for this value. Instead, the message user values have been chosen in ascending order according to perceived importance, so that the message user field can be used for this. This is not a good solution. First, we have many more users than the needed priority levels, so we end up with treating more priority levels than necessary. Second, the user field cannot always accurately reflect the priority of the message. E.g., a message fragment packet should really have the priority of the enveloped user data message, and not the priority of the MSG_FRAGMENTER user. Until now, we have been working around this problem in different ways, but it is now time to implement a consistent way of handling such priorities, although still within the constraint that we cannot allocate any more bits in the regular data message header for this. In this commit, we define a new priority level, TIPC_SYSTEM_IMPORTANCE, that will be the only one used apart from the four (lower) user data levels. All non-data messages map down to this priority. Furthermore, we take some free bits from the MSG_FRAGMENTER header and allocate them to store the priority of the enveloped message. We then adjust the functions msg_importance()/msg_set_importance() so that they read/set the correct header fields depending on user type. This small protocol change is fully compatible, because the code at the receiving end of a link currently reads the importance level only from user data messages, where there is no change. Reviewed-by:
Erik Hugne <erik.hugne@ericsson.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
struct tipc_link contains one single queue for outgoing packets, where both transmitted and waiting packets are queued. This infrastructure is hard to maintain, because we need to keep a number of fields to keep track of which packets are sent or unsent, and the number of packets in each category. A lot of code becomes simpler if we split this queue into a transmission queue, where sent/unacknowledged packets are kept, and a backlog queue, where we keep the not yet sent packets. In this commit we do this separation. Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Jon Paul Maloy authored
The unicast packet header contains a broadcast acknowledge sequence number, that may need to be conveyed to the broadcast link for proper treatment. Currently, the function tipc_rcv(), which is on the most critical data path, calls the function tipc_bclink_acknowledge() to have this done. This call is made for each received packet, and results in the unconditional grabbing of the broadcast link spinlock. This is unnecessary, since we can see directly from tipc_rcv() if the acknowledged number differs from what has been previously acked from the node in question. In the vast majority of cases the numbers won't differ, and there is nothing to update. We now make the call to tipc_bclink_acknowledge() conditional to that the two ack values differ. Reviewed-by:
-
Jon Paul Maloy authored
When we currently extract a bundled buffer from a message bundle in the function tipc_msg_extract(), we allocate a new buffer and explicitly copy the linear data area. This is unnecessary, since we can just clone the buffer and do skb_pull() on the clone to move the data pointer to the correct position. This is what we do in this commit. Reviewed-by:
-
Jon Paul Maloy authored
Currently, TIPC linearizes all incoming buffers directly at reception before passing them upwards in the stack. This is clearly a waste of CPU resources, and must be avoided. In this commit, we eliminate this unnecessary linearization. We still ensure that at least the message header is linear, and that the buffer is linearized where this is still needed, i.e. when unbundling and when reversing messages. In addition, we ensure that fragmented messages are validated after reassembly before delivering them upwards in the stack. Reviewed-by:
-
Jon Paul Maloy authored
The function link_buf_validate() is in reality re-entrant and context independent, and will in later commits be called from several locations. Therefore, we move it to msg.c, make it outline and rename the it to tipc_msg_validate(). We also redesign the function to make proper use of pskb_may_pull() Signed-off-by:
-
Jon Paul Maloy authored
The TIPC protocol spec has defined a 13 bit capability bitmap in the neighbor discovery header, as a means to maintain compatibility between different code and protocol generations. Until now this field has been unused. We now introduce the basic framework for exchanging capabilities between nodes at first contact. After exchange, a peer node's capabilities are stored as a 16 bit bitmap in struct tipc_node. Reviewed-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== Here's another set of Bluetooth & ieee802154 patches intended for 4.1: - Added support for QCA ROME chipset family in the btusb driver - at86rf230 driver fixes & cleanups - ieee802154 cleanups - Refactoring of Bluetooth mgmt API to allow new users - New setting for static Bluetooth address exposed to user space - Refactoring of hci_dev flags to remove limit of 32 - Remove unnecessary fast-connectable setting usage restrictions - Fix behavior to be consistent when trying to pair already paired device - Service discovery corner-case fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Julia Lawall authored
The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL; @@ -EXPORT_SYMBOL(f); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Alexander Aring authored
These registers are also changed by transceiver and should be volatile for right accessing via regmap debugfs. Signed-off-by:
-
