- 22 Apr, 2014 40 commits
-
-
David Hildenbrand authored
When a guest is single-stepped, we want to disable timer interrupts. Otherwise, the guest will continuously execute the external interrupt handler and make debugging of code where timer interrupts are enabled almost impossible. The delivery of timer interrupts can be enforced in such sections by setting a breakpoint and continuing execution. In order to disable timer interrupts, they are disabled in the control register of the guest just before SIE entry and are suppressed in the interrupt check/delivery methods. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
This patch moves the checks for enabled timer (clock-comparator) interrupts and pending timer interrupts into own functions, making the code better readable and easier to maintain. The method kvm_cpu_has_pending_timer is filled with life. Signed-off-by:
-
David Hildenbrand authored
Added documentation for diag 501, stating that no subfunctions are provided and no parameters are used. Signed-off-by:
-
David Hildenbrand authored
This patch adds support to debug the guest using the PER facility on s390. Single-stepping, hardware breakpoints and hardware watchpoints are supported. In order to use the PER facility of the guest without it noticing it, the control registers of the guest have to be patched and access to them has to be intercepted(stctl, stctg, lctl, lctlg). All PER program interrupts have to be intercepted and only the relevant PER interrupts for the guest have to be given back. Special care has to be taken about repeated exits on the same hardware breakpoint. The intervention of the host in the guests PER configuration is not fully transparent. PER instruction nullification can not be used by the guest and too many storage alteration events may be reported to the guest (if it is activated for special address ranges only) when the host concurrently debugging it. Signed-off-by:
-
David Hildenbrand authored
This patch adds the structs to the kernel headers needed to pass information from/to userspace in order to debug a guest on s390 with hardware support. Signed-off-by:
-
David Hildenbrand authored
Introduce the methods to emulate the stctl and stctg instruction. Added tracing code. Signed-off-by:
-
David Hildenbrand authored
When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by:
-
David Hildenbrand authored
Whenever a program interrupt is intercepted, some parameters are stored in the sie control block. These parameters have to be extracted in order to be reinjected correctly. This patch also takes care of intercepted PER events which can occurr in addition to any program interrupt. Signed-off-by:
-
Jens Freimann authored
This patch adds fields which are currently missing but needed for the correct injection of interrupts. This is based on a patch by David Hildenbrand Signed-off-by:
Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Jens Freimann authored
per_perc_atmid is currently a two-byte field that combines two fields, the PER code and the PER Addressing-and-Translation-Mode Identification (ATMID) Let's make them accessible indepently and also rename per_cause to per_code. Signed-off-by:
-
Jens Freimann authored
According to the Principles of Operation, at offset 0xA3 in the lowcore we have the "Architectural-Mode identification", not an "access identification". Signed-off-by:
-
Heiko Carstens authored
Add kerneldoc comment to kvm_s390_real_to_abs() and change the code so it matches the coding style of the rest of gaccess.h. Signed-off-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Convert handle_stsi() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert handle lctl[g]() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert handle_stidp() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert handle_lpsw[e]() to new guest access functions. Signed-off-by:
-
Cornelia Huck authored
The tpi instruction should be suppressed on addressing and protection exceptions, so we need to re-inject the dequeued io interrupt in that case. Signed-off-by:
-
Heiko Carstens authored
Convert handle_tpi() to new guest access functions. The code now sets up a structure which is copied with a single call to guest space instead of issuing several separate guest access calls. This is necessary since the to be copied data may cross a page boundary. If a protection exception happens while accessing any of the pages, the instruction is suppressed and may not have modified any memory contents. Signed-off-by:
-
Heiko Carstens authored
Convert handle_test_block() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert handle_store_cpu_address() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert handle_store_prefix() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert handle_set_clock() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert __sigp_set_prefix() and handle_set_prefix() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert kvm_s390_store_status_unloaded() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert handle_prog() to new guest access functions. Also make the code a bit more readable and look at the return code of write_guest_lc() which was missing before. Signed-off-by:
-
Heiko Carstens authored
Convert pfault code to new guest access functions. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Convert handle_stfl() to new guest access functions. Signed-off-by:
-
Jens Freimann authored
Convert local irqs in __do_deliver_interrupt() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Convert __do_deliver_interrupt() to new guest access functions. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Check if siif is available before setting. Signed-off-by:
-
Heiko Carstens authored
The new guest memory access function write_guest() and read_guest() can be used to access guest memory in an architecture compliant way. These functions will look at the vcpu's PSW and select the correct address space for memory access and also perform correct address wrap around. In case DAT is turned on, page tables will be walked otherwise access will happen to real or absolute memory. Any access exception will be recognized and exception data will be stored in the vcpu's kvm_vcpu_arch.pgm member. Subsequently an exception can be injected if necessary. Missing are: - key protection checks - access register mode support - program event recording support This patch also adds write_guest_real(), read_guest_real(), write_guest_absolute() and read_guest_absolute() guest functions which can be used to access real and absolute storage. These functions currently do not perform any access checks, since there is no use case (yet?). Signed-off-by:
-
Heiko Carstens authored
put_guest_lc, read_guest_lc and write_guest_lc are guest access functions which shall only be used to access the lowcore of a vcpu. These functions should be used for e.g. interrupt handlers where no guest memory access protection facilities, like key or low address protection, are applicable. At a later point guest vcpu lowcore access should happen via pinned prefix pages, so that these pages can be accessed directly via the kernel mapping. All of these *_lc functions can be removed then. Signed-off-by:
-
Heiko Carstens authored
Add a 'struct kvm_s390_pgm_info pgm' member to kvm_vcpu_arch. This structure will be used if during instruction emulation in the context of a vcpu exception data needs to be stored somewhere. Also add a helper function kvm_s390_inject_prog_cond() which can inject vcpu's last exception if needed. Signed-off-by:
-
Heiko Carstens authored
Add kvm_s390_logical_to_effective() helper which converts a guest vcpu's logical storage address to a guest vcpu effective address by applying the rules of the vcpu's addressing mode defined by PSW bits 31 and 32 (extendended and basic addressing mode). Depending on the vcpu's addressing mode the upper 40 bits (24 bit addressing mode), 33 bits (31 bit addressing mode) or no bits (64 bit addressing mode) will be zeroed and the remaining bits will be returned. Signed-off-by:
-
Heiko Carstens authored
Add 'union ctlreg0_bits' to easily allow setting and testing bits of control register 0 bits. This patch only adds the bits needed for the new guest access functions. Other bits and control registers can be added when needed. Signed-off-by:
-
Heiko Carstens authored
Introduce a 'struct psw' which makes it easier to decode and test if certain bits in a psw are set or are not set. In addition also add a 'psw_bits()' helper define which allows to directly modify and test a psw_t structure. E.g. psw_t psw; psw_bits(psw).t = 1; /* set dat bit */ Signed-off-by:
-
Heiko Carstens authored
Make test_vfacility() available for other files. This is needed for the new guest access functions, which test if certain facilities are available for a guest. Signed-off-by:
-
Heiko Carstens authored
It's quite common (in the s390 guest access code) to test if a guest physical address points to a valid guest memory area or not. So add a simple helper function in common code, since this might be of interest for other architectures as well. Signed-off-by:
-
