- 04 Oct, 2011 1 commit
-
-
Marek Szyprowski authored
Commit 1b39d5f2 introduced new common gpio driver for all Samsung GPIO SoCs. The new driver doesn't work correctly on Samsung Exynos4 SoC. It fails to set configuration for all but external interrupt pins. This patch fixes this issue. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
- 21 Sep, 2011 6 commits
-
-
Kukjin Kim authored
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Kukjin Kim authored
According to gpio-samsung.c, this patch updates the name of regarding Samsung GPIO. Basically the samsung_xxx prefix is used in gpio-samsung.c instead of s3c_xxx, because unified name can reduce its complexity. Note: some s3c_xxx stil remains because it is used widely. It will be updated next time. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Kukjin Kim authored
This patch adds support for Samsung GPIOs with one gpio driver and removes old GPIO drivers which are drivers/gpio-s3c24xx.c, gpio-s3c64xx.c, gpio-s5p64x0.c, gpio-s5pc100.c, gpio-s5pv210.c, gpio-exynos4.c, gpio-plat-samsung.c, plat-samsung/gpio-config.c and gpio.c to support each Samsung SoCs before. Because the gpio-samsung.c can replace old Samsung GPIO drivers. Basically, the gpio-samsung.c has been made by their merging and removing duplicated definitions. Note: gpio-samsung.c includes some SoC dependent codes and it will be replaced next time. Cc: Ben Dooks <ben-linux@fluff.org> Acked-by:
-
Kukjin Kim authored
Acked-by:
-
Kukjin Kim authored
Cc: Ben Dooks <ben-linux@fluff.org> Acked-by:
-
Kukjin Kim authored
Cc: Ben Dooks <ben-linux@fluff.org> Acked-by:
-
- 12 Sep, 2011 9 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Remove duplicate "return" statement drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
-
git://git.linaro.org/people/arnd/arm-socLinus Torvalds authored
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
-
Mathieu Desnoyers authored
The LTTng 2.0 kernel tracer (stand-alone module package, available at http://lttng.org) uses the 0xF6 ioctl range for tracer control and transport operations. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/chrismason/linuxLinus Torvalds authored
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
-
Miklos Szeredi authored
kmemleak is reporting that 32 bytes are being leaked by FUSE: unreferenced object 0xe373b270 (size 32): comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<b05517d7>] kmemleak_alloc+0x27/0x50 [<b0196435>] kmem_cache_alloc+0xc5/0x180 [<b02455be>] fuse_alloc_forget+0x1e/0x20 [<b0245670>] fuse_alloc_inode+0xb0/0xd0 [<b01b1a8c>] alloc_inode+0x1c/0x80 [<b01b290f>] iget5_locked+0x8f/0x1a0 [<b0246022>] fuse_iget+0x72/0x1a0 [<b02461da>] fuse_get_root_inode+0x8a/0x90 [<b02465cf>] fuse_fill_super+0x3ef/0x590 [<b019e56f>] mount_nodev+0x3f/0x90 [<b0244e95>] fuse_mount+0x15/0x20 [<b019d1bc>] mount_fs+0x1c/0xc0 [<b01b5811>] vfs_kern_mount+0x41/0x90 [<b01b5af9>] do_kern_mount+0x39/0xd0 [<b01b7585>] do_mount+0x2e5/0x660 [<b01b7966>] sys_mount+0x66/0xa0 This leak report is consistent and happens once per boot on 3.1.0-rc5-dirty. This happens if a FORGET request is queued after the fuse device was released. Reported-by:Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Tested-by:
-
Miklos Szeredi authored
Commit 37fb3a30 ("fuse: fix flock") added in 3.1-rc4 caused flock() to fail with ENOSYS with the kernel ABI version 7.16 or earlier. Fix by falling back to testing FUSE_POSIX_LOCKS for ABI versions 7.16 and earlier. Reported-by:
Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by:
-
-
Arnd Bergmann authored
-
- 11 Sep, 2011 24 commits
-
-
git://linuxtv.org/mchehab/for_linusLinus Torvalds authored
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] vp7045: fix buffer setup [media] nuvoton-cir: simplify raw IR sample handling [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL [media] v4l2: Fix documentation of the codec device controls [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240 [media] gspca - sonixj: Fix wrong register mask for sensor om6802 [media] gspca - ov519: Fix LED inversion of some ov519 webcams [media] pwc: precedence bug in pwc_init_controls()
-
git://openrisc.net/~jonas/linuxLinus Torvalds authored
* 'for-linus' of git://openrisc.net/~jonas/linux: Add missing DMA ops openrisc: don't use pt_regs in struct sigcontext
-
Li Zefan authored
You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
num_bytes should be 4096 not 12288. Signed-off-by:
-
David Sterba authored
An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Miao Xie authored
If we write some data into the data hole of the file(no preallocation for this hole), Btrfs will allocate some disk space, and update nbytes of the inode, but the other element--disk_i_size needn't be updated. At this condition, we must update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size() return 1). # mkfs.btrfs /dev/sdb1 # mount /dev/sdb1 /mnt # touch /mnt/a # truncate -s 856002 /mnt/a # dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc # umount /mnt # btrfsck /dev/sdb1 root 5 inode 257 errors 400 found 32768 bytes used err is 1 Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Miao Xie authored
When we write some data to the place that is beyond the end of the file in direct I/O mode, a data hole will be created. And Btrfs should insert a file extent item that point to this hole into the fs tree. But unfortunately Btrfs forgets doing it. The following is a simple way to reproduce it: # mkfs.btrfs /dev/sdc2 # mount /dev/sdc2 /test4 # touch /test4/a # dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc # umount /test4 # btrfsck /dev/sdc2 root 5 inode 257 errors 100 Reported-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
-
Miao Xie authored
The function - btrfs_cont_expand() forgot to close the transaction handle before it jump out the while loop. Fix it. Signed-off-by:
-
Liu Bo authored
At the beginning of create_pending_snapshot, trans->block_rsv is set to pending->block_rsv and is used for snapshot things, however, when it is done, we do not recover it as will. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
-
Liu Bo authored
While truncating free space cache, we forget to change trans->block_rsv back to the original one, but leave it with the orphan_block_rsv, and then with option inode_cache enable, it leads to countless warnings of btrfs_alloc_free_block and btrfs_orphan_commit_root: WARNING: at fs/btrfs/extent-tree.c:5711 btrfs_alloc_free_block+0x180/0x350 [btrfs]() ... WARNING: at fs/btrfs/inode.c:2193 btrfs_orphan_commit_root+0xb0/0xc0 [btrfs]() Signed-off-by:
-
Josef Bacik authored
It's not enough to just search the commit root, since we could be cow'ing the very block we need to search through, which would mean that its locked and we'll still deadlock. So use path->skip_locking as well. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
Sergei Trofimovich authored
iput() shouldn't be called for inodes in I_NEW state. We need to mark inode as constructed first. WARNING: at fs/inode.c:1309 iput+0x20b/0x210() Call Trace: [<ffffffff8103e7ba>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8103e805>] warn_slowpath_null+0x15/0x20 [<ffffffff810eaf0b>] iput+0x20b/0x210 [<ffffffff811b96fb>] btrfs_iget+0x1eb/0x4a0 [<ffffffff811c3ad6>] btrfs_run_defrag_inodes+0x136/0x210 [<ffffffff811ad55f>] cleaner_kthread+0x17f/0x1a0 [<ffffffff81035b7d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffff811ad3e0>] ? transaction_kthread+0x280/0x280 [<ffffffff8105af86>] kthread+0x96/0xa0 [<ffffffff814336d4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105aef0>] ? kthread_worker_fn+0x190/0x190 [<ffffffff814336d0>] ? gs_change+0xb/0xb Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> CC: Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by:
-
Liu Bo authored
We can reproduce this oops via the following steps: $ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs $ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done $ rm -fr /mnt/btrfs/* $ rm -fr /mnt/btrfs/* then we'll get ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:2264! [...] Call Trace: [<ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs] [<ffffffff81150b95>] vfs_rmdir+0xa5/0xf0 [<ffffffff81153cc3>] do_rmdir+0x123/0x140 [<ffffffff81145ac7>] ? fput+0x197/0x260 [<ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0 [<ffffffff81153d0d>] sys_unlinkat+0x2d/0x40 [<ffffffff8147896b>] system_call_fastpath+0x16/0x1b RIP [<ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs] When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID, while the snapshot's location.objectid remains unchanged. However, btrfs_ino() does not take this into account, and returns a wrong ino, and causes the oops. Signed-off-by:
-
Florian Mickler authored
dvb_usb_device_init calls the frontend_attach method of this driver which uses vp7045_usb_ob. In order to have a buffer ready in vp7045_usb_op, it has to be allocated before that happens. Luckily we can use the whole private data as the buffer as it gets separately allocated on the heap via kzalloc in dvb_usb_device_init and is thus apt for use via usb_control_msg. This fixes a BUG: unable to handle kernel paging request at 0000000000001e78 reported by Tino Keitel and diagnosed by Dan Carpenter. Cc: stable@kernel.org # For v3.0 and upper Tested-by:
Tino Keitel <tino.keitel@tikei.de> Signed-off-by:
Florian Mickler <florian@mickler.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
The nuvoton-cir driver was storing up consecutive pulse-pulse and space-space samples internally, for no good reason, since ir_raw_event_store_with_filter() already merges back to back like samples types for us. This should also fix a regression introduced late in 3.0 that related to a timeout change, which actually becomes correct when coupled with this change. Tested with RC6 and RC5 on my own nuvoton-cir hardware atop vanilla 3.0.0, after verifying quirky behavior in 3.0 due to the timeout change. Reported-by:
Stephan Raue <sraue@openelec.tv> CC: Stephan Raue <sraue@openelec.tv> CC: stable@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jesper Juhl authored
In the unlikely case that pci_find_bus() should return NULL viacam_serial_is_enabled() is going to dereference a NULL pointer and blow up. Better safe than sorry, so be defensive and check the pointer. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Kamil Debski authored
Fixed missing ids of the codec controls description in the controls.xml file. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
-
Jean-François Moine authored
The images are clearer with a lower bridge clock. Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Luiz Carlos Ramos authored
The bug was introduced by git commit 0e4d413a, giving very dark images. Signed-off-by:
Luiz Carlos Ramos <lramos.prof@yahoo.com.br> Signed-off-by:
-
Jean-François Moine authored
The list of the webcams which have LED inversion was rebuild scanning ms-win .inf files. Signed-off-by:
-
Dan Carpenter authored
'!' has higher precedence than '&' so we need parenthesis here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jonas Bonn authored
For the initial architecture submission, not all of the DMA ops were implemented. This patch adds the *map_page and *map_sg variants of the DMA mapping ops. This patch is currently of interest mainly to some drivers that haven't been submitted upstream yet. Signed-off-by:Jonas Bonn <jonas@southpole.se>
-
Jamie Iles authored
The of_device_id tables used for matching should be terminated with empty sentinel values. Signed-off-by:
Jamie Iles <jamie@jamieiles.com> Signed-off-by:
Barry Song <baohua.song@csr.com>
-
Randy Dunlap authored
When CONFIG_NET is disabled, SCSI_QLA_ISCSI selects SCSI_ISCSI_ATTRS, which uses network interfaces, so the build fails with multiple errors: warning: (ISCSI_TCP && SCSI_CXGB3_ISCSI && SCSI_CXGB4_ISCSI && SCSI_QLA_ISCSI && INFINIBAND_ISER) selects SCSI_ISCSI_ATTRS which has unmet direct dependencies (SCSI && NET) ERROR: "skb_trim" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_create" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_release" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ... so make SCSI_QLA_ISCSI also depend on NET to prevent the build errors. Signed-off-by:
-
