- 21 Dec, 2010 19 commits
-
-
Jean Pihet authored
- Reworked and simplified the execution paths for better readability and to avoid duplication of code, - Added comments on the entry and exit points and the interaction with the ROM code for OFF mode restore, - Reworked the existing comments for better readability. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Jean Pihet authored
Organize the code in the following sections: - register access macros, - API functions, - internal functions. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Jean Pihet authored
Using macros from existing include files for registers addresses. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Based on original patch from Vishwa. Signed-off-by: Jean Pihet <j-pihet@ti.com> Cc: Vishwanath BS <vishwanath.bs@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Jean Pihet authored
The SRAM PA addresses are locally defined and used at different places, i.e. SRAM management code and idle sleep code. The macros are now defined at a centralized place, for easier maintenance. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Jean Pihet authored
Remove unused code: - macros, - variables, - unused semaphore locking API. This API shall be added back when needed, - infinite loops for debug. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Eduardo Valentin authored
Limitation i583: Self_Refresh Exit issue after OFF mode Issue: When device is waking up from OFF mode, then SDRC state machine sends inappropriate sequence violating JEDEC standards. Impact: OMAP3630 < ES1.2 is impacted as follows depending on the platform: CS0: for 38.4MHz as internal sysclk, DDR content seen to be stable, while for all other sysclk frequencies, varied levels of instability seen based on varied parameters. CS1: impacted This patch takes option #3 as recommended by the Silicon erratum: Avoid core power domain transitioning to OFF mode. Power consumption impact is expected in this case. To do this, we route core OFF requests to RET request on the impacted revisions of silicon. Acked-by: Jean Pihet <j-pihet@ti.com> [nm@ti.com: rebased the code to 2.6.37-rc2- short circuit code changed a bit] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Nishanth Menon authored
Currently omap3_cpuidle_update_states makes whole sale decision on which C states to update based on enable_off_mode variable Instead, achieve the same functionality by independently providing mpu and core deepest states the system is allowed to achieve and update the idle states accordingly. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> [khilman: fixed additional user of this API in OMAP CPUidle driver] Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Peter 'p2' De Schrijver authored
While coming out of MPU OSWR/OFF states, L2 controller is reseted. The reset behavior is implementation specific as per ARMv7 TRM and hence $L2 needs to be invalidated before it's use. Since the AUXCTRL register is also reconfigured, disable L2 cache before invalidating it and re-enables it afterwards. This is as per Cortex-A8 ARM documentation. Currently this is identified as being needed on OMAP3630 as the disable/enable is done from "public side" while, on OMAP3430, this is done in the "secure side". Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [nm@ti.com: ported to 2.6.37-rc2, added hooks to enable the logic only on 3630] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Nishanth Menon authored
Erratum id: i608 RTA (Retention Till Access) feature is not supported and leads to device stability issues when enabled. This impacts modules with embedded memories on OMAP3630 Workaround is to disable RTA on boot and coming out of core off. For disabling RTA coming out of off mode, we do this by overriding the restore pointer for 3630 as the first point of entry before caches are touched and is common for GP and HS devices. To disable earlier than this could be possible by modifying the PPA for HS devices, but not for GP devices. Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [ambresh@ti.com: co-developer] Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Nishanth Menon authored
Introduce errata handling for OMAP3. This patch introduces errata variable and stub for initialization which will be filled up by follow-on patches. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Peter 'p2' De Schrijver authored
Erratum i581 impacts OMAP3 platforms. PRCM DPLL control FSM removes SDRC_IDLEREQ before DPLL3 locks causing the DPLL not to be locked at times. IMPORTANT: *) This is not a complete workaround implementation as recommended by the silicon erratum. This is a support logic for detecting lockups and attempting to recover where possible and is known to provide stability in multiple platforms. *) This code is mostly important for inactive and retention. The ROM code waits for the maximum DLL lock time when resuming from off mode. So for off mode this code isn't really needed. *) counters are introduced here for eventual export to userspace once the cleanups are completed. This should eventually get refactored as part of cleanups to sleep34xx.S Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Richard Woodruff authored
Analysis in TI kernel with ETM showed that using cache mapped flush in kernel instead of SO mapped flush cost drops by 65% (3.39mS down to 1.17mS) for clean_l2 which is used during sleep sequences. Overall: - speed up - unfortunately there isn't a good alternative flush method today - code reduction and less maintenance and potential bug in unmaintained code This also fixes the bug with the clean_l2 function usage. Reported-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> [nm@ti.com: ported rkw's proposal to 2.6.37-rc2] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Thara Gopinath authored
omap2_common_pm_init is the API where generic system devices like mpu, l3 etc get initialized. This has to happen really early on during the boot and not at a later time. This is especially important with the new opp changes as these devices need to be built before the opp tables init happen. Today both are device initcalls and it works just because of the order of compilation. Making this postcore_initcall is ideal because the omap device layer init happens as a core_initcall and typically rest of the driver/device inits are arch_initcall or something lower. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Jean Pihet authored
Some bad interaction between the idle and the suspend paths has been identified: the idle code is called during the suspend enter and exit sequences. This could cause corruption or lock-up of resources. The solution is to move the calls to disable_hlt at the very beginning of the suspend sequence (ex. in omap3_pm_begin instead of omap3_pm_prepare), and the call to enable_hlt at the very end of the suspend sequence (ex. in omap3_pm_end instead of omap3_pm_finish). Tested with RET and OFF on Beagle and OMAP3EVM. Signed-off-by: Jean Pihet <j-pihet@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: n_gsm: gsm_data_alloc buffer allocation could fail and it is not being checked n_gsm: Fix message length handling when building header
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: gadget: Allow function access to device ID data during bind()" USB: misc: uss720.c: add another vendor/product ID USB: usb-storage: unusual_devs entry for the Samsung YP-CP3 USB: gadget: Remove suspended sysfs file before freeing cdev USB: core: Add input prompt and help text for USB_OTG config USB: ftdi_sio: Add D.O.Tec PID xhci: Fix issue with port array setup and buggy hosts.
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: handle partial result from get_user_pages ceph: mark user pages dirty on direct-io reads ceph: fix null pointer dereference in ceph_init_dentry for nfs reexport ceph: fix direct-io on non-page-aligned buffers ceph: fix msgr_init error path
-
Linus Torvalds authored
.. caused by a missing semi-colon, introduced in commit 0fc13c89 ("cciss: fix cciss_revalidate panic"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Thiago Farina <tfransosi@gmail.com> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Dec, 2010 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] gspca - sonixj: Better handling of the bridge registers 0x01 and 0x17 [media] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17 [media] gspca - sonixj: Set the flag for some devices [media] gspca - sonixj: Add a flag in the driver_info table [media] gspca - sonixj: Fix a bad probe exchange [media] gspca - sonixj: Move bridge init to sd start [media] bttv: remove unneeded locking comments [media] bttv: fix mutex use before init (BZ#24602) [media] Don't export format_by_forcc on two different drivers
-
Linus Torvalds authored
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: INTC interrupt priority level demux fix ARM: mach-shmobile: fix compile warning in mm/init.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: clocksource: sh_cmt: Remove nested spinlock fix
-
Linus Torvalds authored
Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: OMAP: OMAPFB: disable old omapfb for OMAP4 builds OMAP: DSS: VRAM: Align start & size of vram to 2M
-
Linus Torvalds authored
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: update MAX8998 platform data to get rid of WARN() ARM S3C24XX: Fix compilation of PM code for S3C2416 ARM: S3C24XX: Fix CONFIG_S3C_DEV_NAND Kconfig entry
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix cciss_revalidate panic block: max hardware sectors limit wrapper block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead blk-throttle: Correct the placement of smp_rmb() blk-throttle: Trim/adjust slice_end once a bio has been dispatched block: check for proper length of iov entries earlier in blk_rq_map_user_iov() drbd: fix for spin_lock_irqsave in endio callback drbd: don't recvmsg with zero length
-
Al Viro authored
Buggered-in: 76dda93c ("Btrfs: add snapshot/subvolume destroy ioctl") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolas Pitre authored
The cnt32_to_63 algorithm relies on proper counter data evaluation ordering to work properly. This was missing from the provided documentation. Let's augment the documentation with the missing usage constraint and fix the only instance that got it wrong. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Remove debugging check
-
- 19 Dec, 2010 3 commits
-
-
Ingo Molnar authored
Linus reported that the new warning introduced by commit f26f9aff "Sched: fix skip_clock_update optimization" triggers. The need_resched flag can be set by other CPUs asynchronously so this debug check is bogus - remove it. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <AANLkTinJ8hAG1TpyC+CSYPR47p48+1=E7fiC45hMXT_1@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Linus Torvalds authored
Merge branches 'x86-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32: Make sure we can map all of lowmem if we need to x86, vt-d: Handle previous faults after enabling fault handling x86: Enable the intr-remap fault handling after local APIC setup x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic x86, xsave: Use alloc_bootmem_align() instead of alloc_bootmem() bootmem: Add alloc_bootmem_align() x86, gcc-4.6: Use gcc -m options when building vdso x86: HPET: Chose a paranoid safe value for the ETIME check x86: io_apic: Avoid unused variable warning when CONFIG_GENERIC_PENDING_IRQ=n * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix off by one in perf_swevent_init() perf: Fix duplicate events with multiple-pmu vs software events ftrace: Have recordmcount honor endianness in fn_ELF_R_INFO scripts/tags.sh: Add magic for trace-events tracing: Fix panic when lseek() called on "trace" opened for writing
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix the irqtime code for 32bit sched: Fix the irqtime code to deal with u64 wraps nohz: Fix get_next_timer_interrupt() vs cpu hotplug Sched: fix skip_clock_update optimization sched: Cure more NO_HZ load average woes
-
- 18 Dec, 2010 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: handle rt_sigreturn() more cleanly arch/tile: handle CLONE_SETTLS in copy_thread(), not user space
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Fix build errors in sc-mips.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86: avoid high BIOS area when allocating address space x86: avoid E820 regions when allocating address space x86: avoid low BIOS area when allocating address space resources: add arch hook for preventing allocation in reserved areas Revert "resources: support allocating space within a region from the top down" Revert "PCI: allocate bus resources from the top down" Revert "x86/PCI: allocate space from the end of a region, not the beginning" Revert "x86: allocate space within a region top-down" Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode" PCI: Update MCP55 quirk to not affect non HyperTransport variants
-
- 17 Dec, 2010 6 commits
-
-
Chris Metcalf authored
The current tile rt_sigreturn() syscall pattern uses the common idiom of loading up pt_regs with all the saved registers from the time of the signal, then anticipating the fact that we will clobber the ABI "return value" register (r0) as we return from the syscall by setting the rt_sigreturn return value to whatever random value was in the pt_regs for r0. However, this breaks in our 64-bit kernel when running "compat" tasks, since we always sign-extend the "return value" register to properly handle returned pointers that are in the upper 2GB of the 32-bit compat address space. Doing this to the sigreturn path then causes occasional random corruption of the 64-bit r0 register. Instead, we stop doing the crazy "load the return-value register" hack in sigreturn. We already have some sigreturn-specific assembly code that we use to pass the pt_regs pointer to C code. We extend that code to also set the link register to point to a spot a few instructions after the usual syscall return address so we don't clobber the saved r0. Now it no longer matters what the rt_sigreturn syscall returns, and the pt_regs structure can be cleanly and completely reloaded. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
Chris Metcalf authored
Previously we were just setting up the "tp" register in the new task as started by clone() in libc. However, this is not quite right, since in principle a signal might be delivered to the new task before it had its TLS set up. (Of course, this race window still exists for resetting the libc getpid() cached value in the new task, in principle. But in any case, we are now doing this exactly the way all other architectures do it.) This change is important for 2.6.37 since the tile glibc we will be submitting upstream will not set TLS in user space any more, so it will only work on a kernel that has this fix. It should also be taken for 2.6.36.x in the stable tree if possible. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Cc: stable <stable@kernel.org>
-
Jean-Francois Moine authored
The initial values of the registers 0x01 and 0x17 are taken from the sensor table at capture start and updated according to the flag PDN_INV. Their values are updated at each step of the capture initialization and memorized for reuse in capture stop. This patch also fixed automatically some bad hardcoded values of these registers. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
The flag PDN_INV indicates that the sensor pin S_PWR_DN has not the same value as other webcams with the same sensor. For now, only two webcams have been so detected: the Microsoft's VX1000 and VX3000. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-Francois Moine authored
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-