- 18 Nov, 2017 33 commits
-
-
Peter Zijlstra authored
The initial value (@M) compute is: m = 1UL << (BITS_PER_LONG - 2); while (m > x) m >>= 2; Which is a linear search for the highest even bit smaller or equal to @x We can implement this using a binary search using __fls() (or better when its hardware implemented). m = 1UL << (__fls(x) & ~1UL); Especially for small values of @x; which are the more common arguments when doing a CDF on idle times; the linear search is near to worst case, while the binary search of __fls() is a constant 6 (or 5 on 32bit) branches. cycles: branches: branch-misses: PRE: hot: 43.633557 +- 0.034373 45.333132 +- 0.002277 0.023529 +- 0.000681 cold: 207.438411 +- 0.125840 45.333132 +- 0.002277 6.976486 +- 0.004219 SOFTWARE FLS: hot: 29.576176 +- 0.028850 26.666730 +- 0.004511 0.019463 +- 0.000663 cold: 165.947136 +- 0.188406 26.666746 +- 0.004511 6.133897 +- 0.004386 HARDWARE FLS: hot: 24.720922 +- 0.025161 20.666784 +- 0.004509 0.020836 +- 0.000677 cold: 132.777197 +- 0.127471 20.666776 +- 0.004509 5.080285 +- 0.003874 Averages computed over all values <128k using a LFSR to generate order. Cold numbers have a LFSR based branch trace buffer 'confuser' ran between each int_sqrt() invocation. Link: http://lkml.kernel.org/r/20171020164644.936577234@infradead.orgSigned-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Suggested-by:
Joe Perches <joe@perches.com> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Anshul Garg <aksgarg1989@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Michael Davidson <md@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
The current int_sqrt() computation is sub-optimal for the case of small @x. Which is the interesting case when we're going to do cumulative distribution functions on idle times, which we assume to be a random variable, where the target residency of the deepest idle state gives an upper bound on the variable (5e6ns on recent Intel chips). In the case of small @x, the compute loop: while (m != 0) { b = y + m; y >>= 1; if (x >= b) { x -= b; y += m; } m >>= 2; } can be reduced to: while (m > x) m >>= 2; Because y==0, b==m and until x>=m y will remain 0. And while this is computationally equivalent, it runs much faster because there's less code, in particular less branches. cycles: branches: branch-misses: OLD: hot: 45.109444 +- 0.044117 44.333392 +- 0.002254 0.018723 +- 0.000593 cold: 187.737379 +- 0.156678 44.333407 +- 0.002254 6.272844 +- 0.004305 PRE: hot: 67.937492 +- 0.064124 66.999535 +- 0.000488 0.066720 +- 0.001113 cold: 232.004379 +- 0.332811 66.999527 +- 0.000488 6.914634 +- 0.006568 POST: hot: 43.633557 +- 0.034373 45.333132 +- 0.002277 0.023529 +- 0.000681 cold: 207.438411 +- 0.125840 45.333132 +- 0.002277 6.976486 +- 0.004219 Averages computed over all values <128k using a LFSR to generate order. Cold numbers have a LFSR based branch trace buffer 'confuser' ran between each int_sqrt() invocation. Link: http://lkml.kernel.org/r/20171020164644.876503355@infradead.org Fixes: 30493cc9 ("lib/int_sqrt.c: optimize square root algorithm") Signed-off-by:Anshul Garg <aksgarg1989@gmail.com> Acked-by:
-
Markus Elfring authored
Omit extra messages for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Link: http://lkml.kernel.org/r/410a4c5a-4ee0-6fcc-969c-103d8e496b78@users.sourceforge.netSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Geert Uytterhoeven authored
Extract the string test code into its own source file, to allow compiling it either to a loadable module, or built into the kernel. Fixes: 03270c13 ("lib/string.c: add testcases for memset16/32/64") Link: http://lkml.kernel.org/r/1505397744-3387-1-git-send-email-geert@linux-m68k.orgSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
This include was added by commit 187f1882 ("BUG: headers with BUG/BUG_ON etc. need linux/bug.h") because BUG_ON() was used in this header at that time. Some time later, commit 6d75f366 ("lib: radix-tree: check accounting of existing slot replacement users") removed the use of BUG_ON() from this header. Since then, there is no reason to include <linux/bug.h>. Link: http://lkml.kernel.org/r/1505660151-4383-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Chris Mi <chrism@mellanox.com> Signed-off-by:
-
Masahiro Yamada authored
Since commit bc6245e5 ("bug: split BUILD_BUG stuff out into <linux/build_bug.h>"), #include <linux/build_bug.h> is better to pull minimal headers needed for BUILG_BUG() family. Link: http://lkml.kernel.org/r/1505700775-19826-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Dinan Gunawardena <dinan.gunawardena@netronome.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Joe Perches authored
Add tests for duplicate section headers, missing section content, link and scm reachability. Miscellanea: o Add --self-test=<foo> options (a comma separated list of any of sections, patterns, links or scm) where the default without options is all tests o Rename check_maintainers_patterns to self_test o Rename self_test_pattern_info to self_test_info [tom.saeger@oracle.com: improvements] Link: http://lkml.kernel.org/r/13e3986c374902fcf08ae947e36c5c608bbe3b79.1510075301.git.joe@perches.comSigned-off-by:
Tom Saeger <tom.saeger@oracle.com> Signed-off-by:
-
Tom Saeger authored
Add "--self-test" option to get_maintainer.pl to show potential issues in MAINTAINERS file(s) content. Pattern check warnings are shown for "F" and "X" patterns found in MAINTAINERS file(s) which do not match any files known by git. Link: http://lkml.kernel.org/r/64994f911b3510d0f4c8ac2e113501dfcec1f3c9.1509559540.git.tom.saeger@oracle.comSigned-off-by:
-
Randy Dunlap authored
Fix minor typo. Fix missing words in explaining parsing of last line number. Link: http://lkml.kernel.org/r/ebb7ff42-4945-103f-d5b4-f07a6f3343a7@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Randy Dunlap authored
line-range is supposed to treat "1-" as "1-endoffile", so handle the special case by setting last_lineno to UINT_MAX. Fixes this error: dynamic_debug:ddebug_parse_query: last-line:0 < 1st-line:1 dynamic_debug:ddebug_exec_query: query parse failed Link: http://lkml.kernel.org/r/10a6a101-e2be-209f-1f41-54637824788e@infradead.orgSigned-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Christophe JAILLET authored
If 'write' is 0, we can avoid a call to spin_lock/spin_unlock. Link: http://lkml.kernel.org/r/20171020193331.7233-1-christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
-
Sandipan Das authored
The GCC randomize layout plugin can randomize the member offsets of sensitive kernel data structures. To use this feature, certain annotations and members are added to the structures which affect the member offsets even if this plugin is not used. All of these structures are completely randomized, except for task_struct which leaves out some of its members. All the other members are wrapped within an anonymous struct with the __randomize_layout attribute. This is done using the randomized_struct_fields_start and randomized_struct_fields_end defines. When the plugin is disabled, the behaviour of this attribute can vary based on the GCC version. For GCC 5.1+, this attribute maps to __designated_init otherwise it is just an empty define but the anonymous structure is still present. For other compilers, both randomized_struct_fields_start and randomized_struct_fields_end default to empty defines meaning the anonymous structure is not introduced at all. So, if a module compiled with Clang, such as a BPF program, needs to access task_struct fields such as pid and comm, the offsets of these members as recognized by Clang are different from those recognized by modules compiled with GCC. If GCC 4.6+ is used to build the kernel, this can be solved by introducing appropriate defines for Clang so that the anonymous structure is seen when determining the offsets for the members. Link: http://lkml.kernel.org/r/20171109064645.25581-1-sandipan@linux.vnet.ibm.comSigned-off-by:
Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by:
-
Kees Cook authored
Prior to v4.11, x86 used warn_slowpath_fmt() for handling WARN()s. After WARN() was moved to using UD0 on x86, the warning text started appearing _before_ the "cut here" line. This appears to have been a long-standing bug on architectures that used __WARN_TAINT, but it didn't get fixed. v4.11 and earlier on x86: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2956 at drivers/misc/lkdtm_bugs.c:65 lkdtm_WARNING+0x21/0x30 This is a warning message Modules linked in: v4.12 and later on x86: This is a warning message ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2982 at drivers/misc/lkdtm_bugs.c:68 lkdtm_WARNING+0x15/0x20 Modules linked in: With this fix: ------------[ cut here ]------------ This is a warning message WARNING: CPU: 3 PID: 3009 at drivers/misc/lkdtm_bugs.c:67 lkdtm_WARNING+0x15/0x20 Since the __FILE__ reporting happens as part of the UD0 handler, it isn't trivial to move the message to after the WARNING line, but at least we can fix the position of the "cut here" line so all the various logging tools will start including the actual runtime warning message again, when they follow the instruction and "cut here". Link: http://lkml.kernel.org/r/1510100869-73751-4-git-send-email-keescook@chromium.org Fixes: 9a93848f ("x86/debug: Implement __WARN() using UD0") Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kees Cook authored
The "cut here" string is used in a few paths. Define it in a single place. Link: http://lkml.kernel.org/r/1510100869-73751-3-git-send-email-keescook@chromium.orgSigned-off-by:
-
Kees Cook authored
In order to test the ordering of WARN format strings, actually include one in LKDTM. Link: http://lkml.kernel.org/r/1510100869-73751-2-git-send-email-keescook@chromium.orgSigned-off-by:
-
Arnd Bergmann authored
When we pass the result of a multiplication as the timeout or the delay, we can get a warning from gcc-7: drivers/mmc/host/bcm2835.c:596:149: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] drivers/mfd/arizona-core.c:247:195: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c:49:27: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] The warning is a bit questionable inside of a macro, but this is intentional on the side of the gcc developers. It is also an indication of another problem: we evaluate the timeout and sleep arguments multiple times, which can have undesired side-effects when those are complex expressions. This changes the two iopoll variants to use local variables for storing copies of the timeouts. This adds some more type safety, and avoids both the double-evaluation and the gcc warning. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81484 Link: http://lkml.kernel.org/r/20170726133756.2161367-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20171102114048.1526955-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Joe Perches authored
parse-maintainers.pl is convenient, but currently hard-codes the filenames that are used. Allow user-specified filenames to simplify the use of the script. Link: http://lkml.kernel.org/r/48703c068b3235223ffa3b2eb268fa0a125b25e0.1502251549.git.joe@perches.comSigned-off-by:
-
Andi Kleen authored
Some architectures store the WARN_ONCE state in the flags field of the bug_entry. Clear that one too when resetting once state through /sys/kernel/debug/clear_warn_once Pointed out by Michael Ellerman Improves the earlier patch that add clear_warn_once. [ak@linux.intel.com: add a missing ifdef CONFIG_MODULES] Link: http://lkml.kernel.org/r/20171020170633.9593-1-andi@firstfloor.org [akpm@linux-foundation.org: fix unused var warning] [akpm@linux-foundation.org: Use 0200 for clear_warn_once file, per mpe] [akpm@linux-foundation.org: clear BUGFLAG_DONE in clear_once_table(), per mpe] Link: http://lkml.kernel.org/r/20171019204642.7404-1-andi@firstfloor.orgSigned-off-by:
Andi Kleen <ak@linux.intel.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Andi Kleen authored
I like _ONCE warnings because it's guaranteed that they don't flood the log. During testing I find it useful to reset the state of the once warnings, so that I can rerun tests and see if they trigger again, or can guarantee that a test run always hits the same warnings. This patch adds a debugfs interface to reset all the _ONCE warnings so that they appear again: echo 1 > /sys/kernel/debug/clear_warn_once This is implemented by putting all the warning booleans into a special section, and clearing it. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20171017221455.6740-1-andi@firstfloor.orgSigned-off-by:
-
Kees Cook authored
The sh decompressor code triggers stack-protector code generation when using CONFIG_CC_STACKPROTECTOR_STRONG. As done for arm and mips, add a simple static stack-protector canary. As this wasn't protected before, the risk of using a weak canary is minimized. Once the kernel is actually up, a better canary is chosen. Link: http://lkml.kernel.org/r/1506972007-80614-2-git-send-email-keescook@chromium.orgSigned-off-by:
-
Joe Perches authored
Add unnecessary typos by copying the necessary typos. Link: http://lkml.kernel.org/r/1505074722.22023.6.camel@perches.comSigned-off-by:
-
Alexey Dobriyan authored
Gcc doesn't know that "len" is guaranteed to be >=1 by dcache and generates standard while-loop prologue duplicating loop condition. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-27 (-27) function old new delta name_to_int 104 77 -27 Link: http://lkml.kernel.org/r/20170912195213.GB17730@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Save ~360 bytes. add/remove: 1/0 grow/shrink: 0/4 up/down: 104/-463 (-359) function old new delta name_to_int - 104 +104 proc_pid_lookup 217 126 -91 proc_lookupfd_common 212 121 -91 proc_task_lookup 289 194 -95 __proc_create 588 402 -186 Link: http://lkml.kernel.org/r/20170912194850.GA17730@avx2Signed-off-by:
-
Roman Gushchin authored
Right now there is no convenient way to check if a process is being coredumped at the moment. It might be necessary to recognize such state to prevent killing the process and getting a broken coredump. Writing a large core might take significant time, and the process is unresponsive during it, so it might be killed by timeout, if another process is monitoring and killing/restarting hanging tasks. We're getting a significant number of corrupted coredump files on machines in our fleet, just because processes are being killed by timeout in the middle of the core writing process. We do have a process health check, and some agent is responsible for restarting processes which are not responding for health check requests. Writing a large coredump to the disk can easily exceed the reasonable timeout (especially on an overloaded machine). This flag will allow the agent to distinguish processes which are being coredumped, extend the timeout for them, and let them produce a full coredump file. To provide an ability to detect if a process is in the state of being coredumped, we can expose a boolean CoreDumping flag in /proc/pid/status. Example: $ cat core.sh #!/bin/sh echo "|/usr/bin/sleep 10" > /proc/sys/kernel/core_pattern sleep 1000 & PID=$! cat /proc/$PID/status | grep CoreDumping kill -ABRT $PID sleep 1 cat /proc/$PID/status | grep CoreDumping $ ./core.sh CoreDumping: 0 CoreDumping: 1 [guro@fb.com: document CoreDumping flag in /proc/<pid>/status] Link: http://lkml.kernel.org/r/20170928135357.GA8470@castle.DHCP.thefacebook.com Link: http://lkml.kernel.org/r/20170920230634.31572-1-guro@fb.comSigned-off-by:
Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Vlastimil Babka authored
Commit f3c931633a59 ("mm, compaction: persistently skip hugetlbfs pageblocks") has introduced pageblock_skip_persistent() checks into migration and free scanners, to make sure pageblocks that should be persistently skipped are marked as such, regardless of the ignore_skip_hint flag. Since the previous patch introduced a new no_set_skip_hint flag, the ignore flag no longer prevents marking pageblocks as skipped. Therefore we can remove the special cases. The relevant pageblocks will be marked as skipped by the common logic which marks each pageblock where no page could be isolated. This makes the code simpler. Link: http://lkml.kernel.org/r/20171102121706.21504-3-vbabka@suse.czSigned-off-by:Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Vlastimil Babka authored
Pageblock skip hints were added as a heuristic for compaction, which shares core code with CMA. Since CMA reliability would suffer from the heuristics, compact_control flag ignore_skip_hint was added for the CMA use case. Since 6815bf3f ("mm/compaction: respect ignore_skip_hint in update_pageblock_skip") the flag also means that CMA won't *update* the skip hints in addition to ignoring them. Today, direct compaction can also ignore the skip hints in the last resort attempt, but there's no reason not to set them when isolation fails in such case. Thus, this patch splits off a new no_set_skip_hint flag to avoid the updating, which only CMA sets. This should improve the heuristics a bit, and allow us to simplify the persistent skip bit handling as the next step. Link: http://lkml.kernel.org/r/20171102121706.21504-2-vbabka@suse.czSigned-off-by:
Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Vlastimil Babka authored
pageblock_skip_persistent() checks for HugeTLB pages of pageblock order. When clearing pageblock skip bits for compaction, the bits are not cleared for such pageblocks, because they cannot contain base pages suitable for migration, nor free pages to use as migration targets. This optimization can be simply extended to all compound pages of order equal or larger than pageblock order, because migrating such pages (if they support it) cannot help sub-pageblock fragmentation. This includes THP's and also gigantic HugeTLB pages, which the current implementation doesn't persistently skip due to a strict pageblock_order equality check and not recognizing tail pages. While THP pages are generally less "persistent" than HugeTLB, we can still expect that if a THP exists at the point of __reset_isolation_suitable(), it will exist also during the subsequent compaction run. The time difference here could be actually smaller than between a compaction run that sets a (non-persistent) skip bit on a THP, and the next compaction run that observes it. Link: http://lkml.kernel.org/r/20171102121706.21504-1-vbabka@suse.czSigned-off-by:
David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
David Rientjes authored
It is pointless to migrate hugetlb memory as part of memory compaction if the hugetlb size is equal to the pageblock order. No defragmentation is occurring in this condition. It is also pointless to for the freeing scanner to scan a pageblock where a hugetlb page is pinned. Unconditionally skip these pageblocks, and do so peristently so that they are not rescanned until it is observed that these hugepages are no longer pinned. It would also be possible to do this by involving the hugetlb subsystem in marking pageblocks to no longer be skipped when they hugetlb pages are freed. This is a simple solution that doesn't involve any additional subsystems in pageblock skip manipulation. [rientjes@google.com: fix build] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1708201734390.117182@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1708151639130.106658@chino.kir.corp.google.comSigned-off-by:
Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
David Rientjes authored
Kcompactd is needlessly ignoring pageblock skip information. It is doing MIGRATE_SYNC_LIGHT compaction, which is no more powerful than MIGRATE_SYNC compaction. If compaction recently failed to isolate memory from a set of pageblocks, there is nothing to indicate that kcompactd will be able to do so, or that it is beneficial from attempting to isolate memory. Use the pageblock skip hint to avoid rescanning pageblocks needlessly until that information is reset. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1708151638550.106658@chino.kir.corp.google.comSigned-off-by:
-
Corentin Labbe authored
Fix the following warning by removing the unused variable: mm/shmem.c:3205:27: warning: variable 'info' set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/1510774029-30652-1-git-send-email-clabbe@baylibre.comSigned-off-by:
Corentin Labbe <clabbe@baylibre.com> Acked-by:
-
Miles Chen authored
dma-debug reports the following warning: WARNING: CPU: 3 PID: 298 at kernel-4.4/lib/dma-debug.c:604 debug _dma_assert_idle+0x1a8/0x230() DMA-API: cpu touching an active dma mapped cacheline [cln=0x00000882300] CPU: 3 PID: 298 Comm: vold Tainted: G W O 4.4.22+ #1 Hardware name: MT6739 (DT) Call trace: debug_dma_assert_idle+0x1a8/0x230 wp_page_copy.isra.96+0x118/0x520 do_wp_page+0x4fc/0x534 handle_mm_fault+0xd4c/0x1310 do_page_fault+0x1c8/0x394 do_mem_abort+0x50/0xec I found that debug_dma_alloc_coherent() and debug_dma_free_coherent() assume that dma_alloc_coherent() always returns a linear address. However it's possible that dma_alloc_coherent() returns a non-linear address. In this case, page_to_pfn(virt_to_page(virt)) will return an incorrect pfn. If the pfn is valid and mapped as a COW page, we will hit the warning when doing wp_page_copy(). Fix this by calculating pfn for linear and non-linear addresses. [miles.chen@mediatek.com: v4] Link: http://lkml.kernel.org/r/1510872972-23919-1-git-send-email-miles.chen@mediatek.com Link: http://lkml.kernel.org/r/1506484087-1177-1-git-send-email-miles.chen@mediatek.comSigned-off-by:Miles Chen <miles.chen@mediatek.com> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Vitaly Wool authored
There is a race in the current z3fold implementation between do_compact() called in a work queue context and the page release procedure when page's kref goes to 0. do_compact() may be waiting for page lock, which is released by release_z3fold_page_locked right before putting the page onto the "stale" list, and then the page may be freed as do_compact() modifies its contents. The mechanism currently implemented to handle that (checking the PAGE_STALE flag) is not reliable enough. Instead, we'll use page's kref counter to guarantee that the page is not released if its compaction is scheduled. It then becomes compaction function's responsibility to decrease the counter and quit immediately if the page was actually freed. Link: http://lkml.kernel.org/r/20171117092032.00ea56f42affbed19f4fcc6c@gmail.comSigned-off-by:
Vitaly Wool <vitaly.wool@sonymobile.com> Cc: <Oleksiy.Avramchenko@sony.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
The cleanup caused build warnings for constant mask pointers: mm/mempolicy.c: In function `mpol_to_str': ./include/linux/nodemask.h:108:11: warning: the comparison will always evaluate as `true' for the address of `nodes' will never be NULL [-Waddress] An earlier workaround I suggested was incorporated in the version that got merged, but that only solved the problem for gcc-7 and higher, while gcc-4.6 through gcc-6.x still warn. This changes the printing again to use inline functions that make it clear to the compiler that the line that does the NULL check has no idea whether the argument is a constant NULL. Link: http://lkml.kernel.org/r/20171117101545.119689-1-arnd@arndb.de Fixes: 0205f755 ("mm: simplify nodemask printing") Signed-off-by:
-
- 17 Nov, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c4 ("dax: fix PMD faults on zero-length files"): Reviewed-by:Ross Zwisler <ross.zwisler@linux.intel.com> - a39e596b ("xfs: support for synchronous DAX faults") and 7b565c9f ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>" * tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...
-
Linus Torvalds authored
Merge tag 'for-4.15/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull more device mapper updates from Mike Snitzer: "Given your expected travel I figured I'd get these fixes to you sooner rather than later. - a DM multipath stable@ fix to silence an annoying error message that isn't _really_ an error - a DM core @stable fix for discard support that was enabled for an entire DM device despite only having partial support for discards due to a mix of discard capabilities across the underlying devices. - a couple other DM core discard fixes. - a DM bufio @stable fix that resolves a 32-bit overflow" * tag 'for-4.15/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: fix integer overflow when limiting maximum cache size dm: clear all discard attributes in queue_limits when discards are disabled dm: do not set 'discards_supported' in targets that do not need it dm: discard support requires all targets in a table support discards dm mpath: remove annoying message of 'blk_get_request() returned -11'
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma maintainership update from Doug Ledford: "Add Jason Gunthorpe as co-maintainer of the RDMA stack. The change is simply to add Jason Gunthorpe to the MAINTAINERS file for the RDMA stack (and update him in the .mailmap). Jason and I have talked offline, and Jason will be filing a ticket with the k.o helpdesk to get an account on k.o, and then we will likely move the rdma tree to an area where we can both access it and use a shared repo + individual topic branches + merged up for-next branch as the staging basis for each release. Timing here is nice because in the US we are headed into a holiday period whereas Jason will be around to keep the patch flow progressing (I guess Canadians do their equivalent to Thanksgiving in October, so he doesn't have an excuse to ignore email for the next week ;-))" [ .. and Konstantin already got Jason his kernel.org account between the pull request and this actual pull - Linus ] * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: RDMA: Add Jason Gunthorpe as a co-maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
-
- 16 Nov, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ... -
Eric Biggers authored
The default max_cache_size_bytes for dm-bufio is meant to be the lesser of 25% of the size of the vmalloc area and 2% of the size of lowmem. However, on 32-bit systems the intermediate result in the expression (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100 overflows, causing the wrong result to be computed. For example, on a 32-bit system where the vmalloc area is 520093696 bytes, the result is 1174405 rather than the expected 130023424, which makes the maximum cache size much too small (far less than 2% of lowmem). This causes severe performance problems for dm-verity users on affected systems. Fix this by using mult_frac() to correctly multiply by a percentage. Do this for all places in dm-bufio that multiply by a percentage. Also replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary to the comment is now defined in include/linux/vmalloc.h. Depends-on: 9993bc63 ("sched/x86: Fix overflow in cyc2ns_offset") Fixes: 95d402f0 ("dm: add bufio") Cc: <stable@vger.kernel.org> # v3.2+ Signed-off-by:Eric Biggers <ebiggers@google.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
