- 14 Feb, 2017 1 commit
-
-
Mauro Carvalho Chehab authored
Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 13 Feb, 2017 2 commits
-
-
Hans Verkuil authored
Poll messages that are used to allocate a logical address should use the same initiator as the destination. Instead, it expected that the initiator was 0xf which is not according to the standard. This also had consequences for the message checks in cec_transmit_msg_fh that incorrectly rejected poll messages with the same initiator and destination. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
This reverts 'commit 7e0739cd ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range"). The problem is that many drivers can convert R'G'B' content (often from sensors) to Y'CbCr, but they all produce limited range Y'CbCr. To stay backwards compatible the default quantization range for sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full range, even though the corresponding standards specify full range. Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and also update the documentation. Fixes: 7e0739cd ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range") Signed-off-by:
-
- 30 Jan, 2017 3 commits
-
-
Hans Verkuil authored
Due to an incorrect condition the last_la used for the initial attempt at claiming a logical address could be wrong. The last_la wasn't converted to a mask when ANDing with type2mask, so that test was broken. Signed-off-by:
-
Hans Verkuil authored
Mention where to find the CEC utilities. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Hans Verkuil authored
The API is now finalized, so this notice should be dropped. Signed-off-by:
-
- 26 Dec, 2016 1 commit
-
-
Mauro Carvalho Chehab authored
* patchwork: [media] s5k4ecgx: select CRC32 helper [media] dvb: avoid warning in dvb_net [media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time [media] v4l: tvp5150: Fix comment regarding output pin muxing [media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers [media] pctv452e: move buffer to heap, no mutex [media] media/cobalt: use pci_irq_allocate_vectors [media] cec: fix race between configuring and unconfiguring [media] cec: move cec_report_phys_addr into cec_config_thread_func [media] cec: replace cec_report_features by cec_fill_msg_report_features [media] cec: update log_addr[] before finishing configuration [media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2 [media] cec: when canceling a message, don't overwrite old status info [media] cec: fix report_current_latency [media] smiapp: Make suspend and resume functions __maybe_unused [media] smiapp: Implement power-on and power-off sequences without runtime PM
-
- 21 Dec, 2016 16 commits
-
-
Arnd Bergmann authored
A rare randconfig build failure shows up in this driver when the CRC32 helper is not there: drivers/media/built-in.o: In function `s5k4ecgx_s_power': s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le' This adds the 'select' that all other users of this function have. Fixes: 8b99312b ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
With gcc-5 or higher on x86, we can get a bogus warning in the dvb-net code: drivers/media/dvb-core/dvb_net.c: In function 'dvb_net_ule': arch/x86/include/asm/string_32.h:78:22: error: '*((void *)&dest_addr+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] The problem here is that gcc doesn't track all of the conditions to prove it can't end up copying uninitialized data. This changes the logic around so we zero out the destination address earlier when we determine that it is not set here. This allows the compiler to figure it out. Signed-off-by:
-
Laurent Pinchart authored
The s_stream() handler incorrectly writes the whole MISC_CTL register to enable or disable the outputs, overriding the output pinmuxing configuration. Fix it to only touch the output enable bits. The CONF_SHARED_PIN register is also written by the same function, resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this is obviously incorrect, and breaks operation on other devices. Fix it by removing the write. Cc: stable@vger.kernel.org # For Kernel 4.5 and upper Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK pins are muxed differently depending on whether the input is an S-Video or composite signal. The comment that explains the logic doesn't reflect the code. It appears that the comment is incorrect, as disabling the output data bus in composite mode makes no sense. Update the comment to match the code. While at it define macros for the MISC_CTL register bits, the code is too confusing with numerical values. Cc: stable@vger.kernel.org # For Kernel 4.5 and upper Signed-off-by:
-
Laurent Pinchart authored
The tvp5150 doesn't support format setting through the subdev pad API and thus implements the set format handler as a get format operation. The single handler, tvp5150_fill_fmt(), resets the device by calling tvp5150_reset(). This causes malfunction as the device can be reset at will, possibly from userspace when the subdev userspace API is enabled. The reset call was added in commit ec2c4f3f ("[media] media: tvp5150: Add mbus_fmt callbacks"), probably as an attempt to set the device to a known state before detecting the current TV standard. However, the get format handler doesn't access the hardware to get the TV standard since commit 963ddc63 ("[media] media: tvp5150: Add cropping support"). There is thus no need to reset the device when getting the format. However, removing the tvp5150_reset() from the get/set format handlers results in the function not being called at all if the bridge driver doesn't use the .reset() operation. The operation is nowadays abused and shouldn't be used, so shouldn't expect bridge drivers to call it. To make sure the device is properly initialize, move the reset call from the format handlers to the probe function. Cc: stable@vger.kernel.org # For Kernel 4.5 and upper Signed-off-by:
-
Max Kellermann authored
commit 73d5c5c8 ("[media] pctv452e: don't do DMA on stack") caused a NULL pointer dereference which occurs when dvb_usb_init() calls dvb_usb_device_power_ctrl() for the first time, before the frontend has been attached. It also caused a recursive deadlock because tt3650_ci_msg_locked() has already locked the mutex. So, partially revert it, but move the buffer to the heap (DMA capable), not to the stack (may not be DMA capable). Instead of sharing one buffer which needs mutex protection, do a new heap allocation for each call. Fixes: commit 73d5c5c8 ("[media] pctv452e: don't do DMA on stack") Cc: stable@vger.kernel.org # For Kernel 4.9 Signed-off-by:
Max Kellermann <max.kellermann@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
Simply the interrupt setup by using the new PCI layer helpers. Despite using pci_enable_msi_range, this driver was only requesting a single MSI vector anyway. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Hans Verkuil authored
This race was discovered by running cec-compliance -A with the cec module debug parameter set to 2: suddenly the test would fail. It turns out that this happens when the test configures the adapter in non-blocking mode, then it waits for the CEC_EVENT_STATE_CHANGE event and once the event is received it unconfigures the adapter. What happened was that the unconfigure was executed while the configure was still transmitting the Report Features and Report Physical Address messages. This messed up the internal state of the cec_adapter. The fix is to transmit those messages with the adap->lock mutex held (this will just queue them up in the internal transmit queue, and not actually transmit anything yet). Only unlock the mutex once everything is done. The main thread will dequeue the messages from the internal transmit queue and transmit them one by one, unless an unconfigure was done, and in that case any messages are just dropped. Signed-off-by:
-
Hans Verkuil authored
It's only a small function and this makes it easier to switch to transmitting the message with adap->lock held in the next patch. Signed-off-by:
-
Hans Verkuil authored
The fill function just fills in the cec_msg struct, it doesn't transmit the message. This is now done explicitly. This makes it possible to switch to transmitting this message with adap->lock held. Signed-off-by:
-
Hans Verkuil authored
The loop that sets the unused logical addresses to INVALID should be done before 'configured' is set to true. This ensures that cec_log_addrs is consistent before it will be used. Signed-off-by:
-
Hans Verkuil authored
This is a 2.0 only message, so it should return Feature Abort if the adapter is configured for CEC version 1.4. Right now it does nothing, which means that the sender will time out. Signed-off-by:
-
Hans Verkuil authored
When a pending message was canceled (e.g. due to a timeout), then the old tx_status info was overwritten instead of ORed. The same happened with the tx_error_cnt field. So just modify them instead of overwriting them. Signed-off-by:
-
Hans Verkuil authored
In the (very) small print of the REPORT_CURRENT_LATENCY message there is a line that says that the last byte of the message (audio out delay) is only present if the 'audio out compensated' value is 3. I missed this, and so if this message was sent with a total length of 6 (i.e. without the audio out delay byte), then it was rejected by the framework since a minimum length of 7 was expected. Fix this minimum length check and update the wrappers in cec-funcs.h to do the right thing based on the message length. Signed-off-by:
-
Sakari Ailus authored
The smiapp_suspend() and smiapp_resume() functions will end up being unused if CONFIG_PM is enabled but CONFIG_PM_SLEEP is disabled, causing a compiler warning from both of the function definitions. Fix this by marking the functions with __maybe_unused. Suggested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Power on the sensor when the module is loaded and power it off when it is removed. Signed-off-by:
-
- 15 Dec, 2016 1 commit
-
-
Mauro Carvalho Chehab authored
* patchwork: (496 commits) [media] v4l: tvp5150: Add missing break in set control handler [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER [media] em28xx: don't store usb_device at struct em28xx [media] em28xx: use usb_interface for dev_foo() calls [media] em28xx: don't change the device's name [media] mn88472: fix chip id check on probe [media] mn88473: fix chip id check on probe [media] lirc: fix error paths in lirc_cdev_add() [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs [media] s5p-mfc: Rework clock handling [media] s5p-mfc: Don't keep clock prepared all the time [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code [media] s5p-mfc: Remove dead conditional code [media] s5p-mfc: Ensure that clock is disabled before turning power off [media] s5p-mfc: Remove special clock rate management [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES [media] vivid: Set color_enc on HSV formats [media] v4l2-tpg: Init hv_enc field with a valid value ...
-
- 13 Dec, 2016 16 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation update from Jonathan Corbet: "These are the documentation changes for 4.10. It's another busy cycle for the docs tree, as the sphinx conversion continues. Highlights include: - Further work on PDF output, which remains a bit of a pain but should be more solid now. - Five more DocBook template files converted to Sphinx. Only 27 to go... Lots of plain-text files have also been converted and integrated. - Images in binary formats have been replaced with more source-friendly versions. - Various bits of organizational work, including the renaming of various files discussed at the kernel summit. - New documentation for the device_link mechanism. ... and, of course, lots of typo fixes and small updates" * tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits) dma-buf: Extract dma-buf.rst Update Documentation/00-INDEX docs: 00-INDEX: document directories/files with no docs docs: 00-INDEX: remove non-existing entries docs: 00-INDEX: add missing entries for documentation files/dirs docs: 00-INDEX: consolidate process/ and admin-guide/ description scripts: add a script to check if Documentation/00-INDEX is sane Docs: change sh -> awk in REPORTING-BUGS Documentation/core-api/device_link: Add initial documentation core-api: remove an unexpected unident ppc/idle: Add documentation for powersave=off Doc: Correct typo, "Introdution" => "Introduction" Documentation/atomic_ops.txt: convert to ReST markup Documentation/local_ops.txt: convert to ReST markup Documentation/assoc_array.txt: convert to ReST markup docs-rst: parse-headers.pl: cleanup the documentation docs-rst: fix media cleandocs target docs-rst: media/Makefile: reorganize the rules docs-rst: media: build SVG from graphviz files docs-rst: replace bayer.png by a SVG image ... -
Linus Torvalds authored
Merge updates from Andrew Morton: - various misc bits - most of MM (quite a lot of MM material is awaiting the merge of linux-next dependencies) - kasan - printk updates - procfs updates - MAINTAINERS - /lib updates - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (123 commits) init: reduce rootwait polling interval time to 5ms binfmt_elf: use vmalloc() for allocation of vma_filesz checkpatch: don't emit unified-diff error for rename-only patches checkpatch: don't check c99 types like uint8_t under tools checkpatch: avoid multiple line dereferences checkpatch: don't check .pl files, improve absolute path commit log test scripts/checkpatch.pl: fix spelling checkpatch: don't try to get maintained status when --no-tree is given lib/ida: document locking requirements a bit better lib/rbtree.c: fix typo in comment of ____rb_erase_color lib/Kconfig.debug: make CONFIG_STRICT_DEVMEM depend on CONFIG_DEVMEM MAINTAINERS: add drm and drm/i915 irc channels MAINTAINERS: add "C:" for URI for chat where developers hang out MAINTAINERS: add drm and drm/i915 bug filing info MAINTAINERS: add "B:" for URI where to file bugs get_maintainer: look for arbitrary letter prefixes in sections printk: add Kconfig option to set default console loglevel printk/sound: handle more message headers printk/btrfs: handle more message headers printk/kdb: handle more message headers ...
-
Joe Perches authored
.c and .h source files should not be executable, change the permissions to 0644. [ This would normally go through Andrew Morton, but his ancient patch-based toolchain doesn't do permission changes ] Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "The irq department provides: - a major update to the auto affinity management code, which is used by multi-queue devices - move of the microblaze irq chip driver into the common driver code so it can be shared between microblaze, powerpc and MIPS - a series of updates to the ARM GICV3 interrupt controller - the usual pile of fixes and small improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) powerpc/virtex: Use generic xilinx irqchip driver irqchip/xilinx: Try to fall back if xlnx,kind-of-intr not provided irqchip/xilinx: Add support for parent intc irqchip/xilinx: Rename get_irq to xintc_get_irq irqchip/xilinx: Restructure and use jump label api irqchip/xilinx: Clean up print messages microblaze/irqchip: Move intc driver to irqchip ARM: virt: Select ARM_GIC_V3_ITS ARM: gic-v3-its: Add 32bit support to GICv3 ITS irqchip/gic-v3-its: Specialise readq and writeq accesses irqchip/gic-v3-its: Specialise flush_dcache operation irqchip/gic-v3-its: Narrow down Entry Size when used as a divider irqchip/gic-v3-its: Change unsigned types for AArch32 compatibility irqchip/gic-v3: Use nops macro for Cavium ThunderX erratum 23154 irqchip/gic-v3: Convert arm64 GIC accessors to {read,write}_sysreg_s genirq/msi: Drop artificial PCI dependency irqchip/bcm7038-l1: Implement irq_cpu_offline() callback genirq/affinity: Use default affinity mask for reserved vectors genirq/affinity: Take reserved vectors into account when spreading irqs PCI: Remove the irq_affinity mask from struct pci_dev ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "The time/timekeeping/timer folks deliver with this update: - Fix a reintroduced signed/unsigned issue and cleanup the whole signed/unsigned mess in the timekeeping core so this wont happen accidentaly again. - Add a new trace clock based on boot time - Prevent injection of random sleep times when PM tracing abuses the RTC for storage - Make posix timers configurable for real tiny systems - Add tracepoints for the alarm timer subsystem so timer based suspend wakeups can be instrumented - The usual pile of fixes and updates to core and drivers" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) timekeeping: Use mul_u64_u32_shr() instead of open coding it timekeeping: Get rid of pointless typecasts timekeeping: Make the conversion call chain consistently unsigned timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion alarmtimer: Add tracepoints for alarm timers trace: Update documentation for mono, mono_raw and boot clock trace: Add an option for boot clock as trace clock timekeeping: Add a fast and NMI safe boot clock timekeeping/clocksource_cyc2ns: Document intended range limitation timekeeping: Ignore the bogus sleep time if pm_trace is enabled selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous" clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map() arm64: dts: rockchip: Arch counter doesn't tick in system suspend clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend posix-timers: Make them configurable posix_cpu_timers: Move the add_device_randomness() call to a proper place timer: Move sys_alarm from timer.c to itimer.c ptp_clock: Allow for it to be optional Kconfig: Regenerate *.c_shipped files after previous changes ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp hotplug updates from Thomas Gleixner: "This is the final round of converting the notifier mess to the state machine. The removal of the notifiers and the related infrastructure will happen around rc1, as there are conversions outstanding in other trees. The whole exercise removed about 2000 lines of code in total and in course of the conversion several dozen bugs got fixed. The new mechanism allows to test almost every hotplug step standalone, so usage sites can exercise all transitions extensively. There is more room for improvement, like integrating all the pointlessly different architecture mechanisms of synchronizing, setting cpus online etc into the core code" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) tracing/rb: Init the CPU mask on allocation soc/fsl/qbman: Convert to hotplug state machine soc/fsl/qbman: Convert to hotplug state machine zram: Convert to hotplug state machine KVM/PPC/Book3S HV: Convert to hotplug state machine arm64/cpuinfo: Convert to hotplug state machine arm64/cpuinfo: Make hotplug notifier symmetric mm/compaction: Convert to hotplug state machine iommu/vt-d: Convert to hotplug state machine mm/zswap: Convert pool to hotplug state machine mm/zswap: Convert dst-mem to hotplug state machine mm/zsmalloc: Convert to hotplug state machine mm/vmstat: Convert to hotplug state machine mm/vmstat: Avoid on each online CPU loops mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead() tracing/rb: Convert to hotplug state machine oprofile/nmi timer: Convert to hotplug state machine net/iucv: Use explicit clean up labels in iucv_init() x86/pci/amd-bus: Convert to hotplug state machine x86/oprofile/nmi: Convert to hotplug state machine ...
-
Jungseung Lee authored
For several devices, the rootwait time is sensitive because it directly affects booting time. The polling interval of rootwait is currently 100ms. To save unnessesary waiting time, reduce the polling interval to 5 ms. [akpm@linux-foundation.org: remove used-once #define] Link: http://lkml.kernel.org/r/20161207060743.1728-1-js07.lee@samsung.comSigned-off-by:
Jungseung Lee <js07.lee@samsung.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jason Baron authored
We have observed page allocations failures of order 4 during core dump while trying to allocate vma_filesz. This results in a useless core file of size 0. To improve reliability use vmalloc(). Note that the vmalloc() allocation is bounded by sysctl_max_map_count, which is 65,530 by default. So with a 4k page size, and 8 bytes per seg, this is a max of 128 pages or an order 7 allocation. Other parts of the core dump path, such as fill_files_note() are already using vmalloc() for presumably similar reasons. Link: http://lkml.kernel.org/r/1479745791-17611-1-git-send-email-jbaron@akamai.comSigned-off-by:
Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Andrew Jeffery authored
I generated a patch with `git format-patch` which checkpatch thinks is invalid: $ ./scripts/checkpatch.pl lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? Documentation/devicetree/bindings/mfd/{ => syscon}/aspeed-scu.txt | 0 ERROR: Does not appear to be a unified-diff format patch total: 1 errors, 1 warnings, 0 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. The patch in question was all renames with no edits, giving 100% similarity and thus no diff markers. Set '$is_patch = 1;' in the add/remove/rename detection to avoid generating spurious warnings. Link: http://lkml.kernel.org/r/20161205232224.22685-1-andrew@aj.id.auSigned-off-by:Andrew Jeffery <andrew@aj.id.au> Acked-by:
-
Tomas Winkler authored
Tools contains user space code so uintX_t types are just fine. Link: http://lkml.kernel.org/r/1479286379-853-1-git-send-email-tomas.winkler@intel.comSigned-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
-
Joe Perches authored
Code that puts a single dereferencing identifier on multiple lines like: struct_identifier->member[index]. member = <foo>; is generally hard to follow. Prefer that dereferencing identifiers be single line. Link: http://lkml.kernel.org/r/e9c191ae3f41bedc8ffd5c0fbcc5a1cec1d1d2df.1478120869.git.joe@perches.comSigned-off-by: -
Joe Perches authored
perl files (*.pl) are mostly inappropriate to check coding styles so exempt them from long line checks and various .[ch] file type tests. And as well, only scan absolute paths in the commit log, not in the patch. Link: http://lkml.kernel.org/r/85b101d50acafe6c0261d9f7df283c827da52c4a.1477340110.git.joe@perches.comSigned-off-by:
-
Andrew Morton authored
s/preceeded/preceded/ Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Jerome Forissier authored
Fixes the following warning: Use of uninitialized value $root in concatenation (.) or string at /path/to/checkpatch.pl line 764. Link: http://lkml.kernel.org/r/1476719709-16668-1-git-send-email-jerome.forissier@linaro.orgSigned-off-by:
Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
-
Daniel Vetter authored
I wanted to wrap a bunch of ida_simple_get calls into their own locking, until I dug around and read the original commit message. Stuff like this should imo be added to the kernel doc, let's do that. Link: http://lkml.kernel.org/r/20161027072216.20411-1-daniel.vetter@ffwll.chSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Jie Chen authored
In Case 3 of `sibling == parent->rb_right': Right rotation will not change color of sl and S in the diagram (i.e. should not change "sl" to "Sl", "S" to "s") In Case 3 of `sibling == parent->rb_left': (p) (p) / \ / \ S N --> sr N / \ / Sl sr S / Sl This is actually left rotation at "S", not right rotation. In Case 4 of `sibling == parent->rb_left': (p) (s) / \ / \ S N --> Sl P / \ / \ sl (sr) (sr) N This is actually right rotation at "(p)" + color flips, not left rotation + color flips. Link: http://lkml.kernel.org/r/1472391115-3702-1-git-send-email-fykcee1@gmail.comSigned-off-by:Jie Chen <fykcee1@gmail.com> Cc: Wei Yang <weiyang@linux.vnet.ibm.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
