Unlike other places, this function uses name "dev" for what should be
"orig_dev", which might be a bit confusing. So fix this.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
mlx4: Extend statistics gathering and display

This series from Eran and Matan extends the statistics collected and later
reported to the user via ethtool for native mode and SRIOV PF.

More Packet statistics, PFC statistics and global pause statistics
are now displayed via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

More packet statistics are now calculated and visible to the user via
ethtool:

- RX packet errors statistics.
- TX/RX drops are now calculated.
- TX multicast and broadcast statistics.
- RX/TX per priority bytes statistics.
- RX/TX no vlan packets and bytes statistics.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flow control per priority and Global pause counters are now visible via
ethtool.  The counters shows statistics regarding pauses in the device.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will allow parallel access to the statistics bitmap.
A pre-step for adding PFC counters, where the statistics bitmap
can be dynamically changed when modifying the PFC setting.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver uses a bitmask to indicate which statistics should be
displayed to the user in ethtool. The bitmask is u64, therefore we are
limited for a selective view of up to 64 statistics. Extend the bitmap
in order to show more than 64 statistics.

In addition, add packet statistics to the ethtool display for PF.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The statistics bitmap belongs to the Ethernet driver, move it there.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mlx4_stats.h file and move there all statistics structs and marcos.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two counters (rx_chksum_complete and tx_chksum_offload) are not displayed
under SRIOV for the PF via ethtool because their bit mask is off, fix that.

Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE')
Fixes: 9fab426d ('mlx4: add a new xmit_more counter')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petri Gynther says:

====================
net: bcmgenet: code cleanup

Five patches to clean up bcmgenet code:
1. add UMAC_IRQ_RXDMA_DONE and UMAC_IRQ_TXDMA_DONE
2. remove __bcmgenet_fini_dma()
3. fix bcmgenet_open()
4. add UMAC_IRQ_LINK_EVENT
5. fix the call to phy_mac_interrupt()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On phy_mac_interrupt() call, the new_link parameter should be 0 or 1.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add #define UMAC_IRQ_LINK_EVENT to simplify link event handling code.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If bcmgenet_init_dma() fails, it cleans up after itself. Rx and Tx
DMAs are off, and NAPI instances haven't been netif_napi_add()'ed.
Therefore, we need to skip calling bcmgenet_fini_dma() on the error
handling path. bcmgenet_resume() already does this correctly.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bcmgenet_fini_dma() is the only caller of __bcmgenet_fini_dma().
Move __bcmgenet_fini_dma() code inside bcmgenet_fini_dma().
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add #define for UMAC_IRQ_RXDMA_DONE and UMAC_IRQ_TXDMA_DONE in order
to simplify the code that handles Rx and Tx default queue interrupts.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

K. Y. Srinivasan says:

====================
hv_netvsc: Eliminate memory allocation in the send path

The network protocol used to communicate with the host is the remote ndis (rndis)
protocol. We need to decorate each outgoing packet with a rndis header and
additional rndis state (rndis per-packet state). To manage this state, we
currently allocate memory in the transmit path. Eliminate this allocation by
requesting additional head room in the skb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The network protocol used to communicate with the host is the remote ndis (rndis)
protocol. We need to decorate each outgoing packet with a rndis header and
additional rndis state (rndis per-packet state). To manage this state, we
currently allocate memory in the transmit path. Eliminate this allocation by
requesting additional head room in the skb.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for embedding the rndis state and other packet state into
the skb, cleanup the test for freeing the skb.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use bool constants as the return values instead of 1 and 0.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Benc says:

====================
netlink: access functions for IP address attributes

There are many places that read or write IP addresses to netlink attributes.
With IPv6 addresses, every such place currently has to use generic nla_put
and nla_memcpy. Implementing IPv6 address access functions simplify things
and makes the code more intelligible. IPv4 address access functions has
lesser value but it would be better to be consistent between IPv6 and IPv4
and they still serve as documentation.

The conversion is straightforward and the resulting patches are not that
large, thus I kept all the changes in the patches that introduce the access
functions. If anyone prefers to split the definition of access functions and
the conversion and/or break it out by network protocols, please let me know.

While doing the conversion, I came across ugly typecasting in
inetpeer_addr_base and xfrm_address_t when dealing with IPv6 addresses.
Instead of introducing more of this, I cleaned it up. Those are the first
two patches, serving as a prerequisite to the latter two.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Those are counterparts to nla_put_in_addr and nla_put_in6_addr.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IP addresses are often stored in netlink attributes. Add generic functions
to do that.

For nla_put_in_addr, it would be nicer to pass struct in_addr but this is
not used universally throughout the kernel, in way too many places __be32 is
used to store IPv4 address.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and
get rid of the typecasting.

Modifying the uapi header is okay, the union has still the same size.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and get rid
of the typecasting.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some lines in vxlan code are indented by 7 spaces instead of a tab.

Fixes: e4c7ed41 ("vxlan: add ipv6 support")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ian Morris says:

====================
ipv6: coding style - comparisons with NULL

The following patches address some coding style issues only. No
functional changes and no changes detected by objdiff.

The IPV6 code uses multiple different styles when comparing with NULL
(I.e. x == NULL and !x as well as x != NULL and x). Generally the
latter form is preferred according to checkpatch and so this changes
aligns the code to this style.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x != NULL and sometimes as x. x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.
Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x == NULL and sometimes as !x. !x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.
Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
bnx2x: link and protection changes

This patch series contains 2 small additions to link configuration,
as well as a safeguard against loading the device on a hardware at
a failed state.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It's possible that due to errors [either on PCI or on device itself]
registers reads would fail, returning all-Fs.

This adds a check as early as possible so that driver will not read junk
values and make incorrect probe decisions according to them; instead,
gracefully fail the probe.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Number of link changes are now being stored in shared memory [by all possible
link owners], for management use [as well as possible debug information for
dumps].
Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable controlling Post2, coeff, IPreDriver and IFir according to NVRAM setup.
Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While fixing a recent issue I noticed that we are doing some unnecessary
work inside the loop for ip_fib_net_exit.  As such I am pulling out the
initialization to NULL for the locally stored fib_local, fib_main, and
fib_default.

In addition I am restoring the original code for flushing the table as
there is no need to split up the fib_table_flush and hlist_del work since
the code for packing the tnodes with multiple key vectors was dropped.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes the following warning:

 BUG: sleeping function called from invalid context at mm/slub.c:1268
 in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u8:0
 INFO: lockdep is turned off.
 CPU: 3 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.0.0-rc5+ #895
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 Workqueue: netns cleanup_net
  0000000000000006 ffff88011953fa68 ffffffff81a203b6 000000002c3a2c39
  ffff88011952a680 ffff88011953fa98 ffffffff8109daf0 ffff8801186c6aa8
  ffffffff81fbc9e5 00000000000004f4 0000000000000000 ffff88011953fac8
 Call Trace:
  [<ffffffff81a203b6>] dump_stack+0x4c/0x65
  [<ffffffff8109daf0>] ___might_sleep+0x1c3/0x1cb
  [<ffffffff8109db70>] __might_sleep+0x78/0x80
  [<ffffffff8117a60e>] slab_pre_alloc_hook+0x31/0x8f
  [<ffffffff8117d4f6>] __kmalloc+0x69/0x14e
  [<ffffffff818ed0e1>] ? kzalloc.constprop.20+0xe/0x10
  [<ffffffff818ed0e1>] kzalloc.constprop.20+0xe/0x10
  [<ffffffff818ef622>] fib_trie_table+0x27/0x8b
  [<ffffffff818ef6bd>] fib_trie_unmerge+0x37/0x2a6
  [<ffffffff810b06e1>] ? arch_local_irq_save+0x9/0xc
  [<ffffffff818e9793>] fib_unmerge+0x2d/0xb3
  [<ffffffff818f5f56>] fib4_rule_delete+0x1f/0x52
  [<ffffffff817f1c3f>] ? fib_rules_unregister+0x30/0xb2
  [<ffffffff817f1c8b>] fib_rules_unregister+0x7c/0xb2
  [<ffffffff818f64a1>] fib4_rules_exit+0x15/0x18
  [<ffffffff818e8c0a>] ip_fib_net_exit+0x23/0xf2
  [<ffffffff818e91f8>] fib_net_exit+0x32/0x36
  [<ffffffff817c8352>] ops_exit_list+0x45/0x57
  [<ffffffff817c8d3d>] cleanup_net+0x13c/0x1cd
  [<ffffffff8108b05d>] process_one_work+0x255/0x4ad
  [<ffffffff8108af69>] ? process_one_work+0x161/0x4ad
  [<ffffffff8108b4b1>] worker_thread+0x1cd/0x2ab
  [<ffffffff8108b2e4>] ? process_scheduled_works+0x2f/0x2f
  [<ffffffff81090686>] kthread+0xd4/0xdc
  [<ffffffff8109ec8f>] ? local_clock+0x19/0x22
  [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83
  [<ffffffff81a2c0c8>] ret_from_fork+0x58/0x90
  [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83

The issue was that as a part of exiting the default rules were being
deleted which resulted in the local trie being unmerged.  By moving the
freeing of the FIB tables up we can avoid the unmerge since there is no
local table left when we call the fib4_rules_exit function.

Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-03-27

Here's another set of Bluetooth & 802.15.4 patches for 4.1:

 - New API to control LE advertising data (i.e. peripheral role)
 - mac802154 & at86rf230 cleanups
 - Support for toggling quirks from debugfs (useful for testing)
 - Memory leak fix for LE scanning
 - Extra version info reading support for Broadcom controllers

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed two warnings in e1000e and igb, when switching to timespec64
some printf formats started to not match.  In theses cases actually
the new type is __kernel_time_t which is __kernel_long_t which
unfortunately can be either "long" or "long long".  So to solve
this I cases the arguments to "long long".  -DaveM

Richard Cochran says:

====================
ptp: get ready for 2038

This series converts the core driver methods of the PTP Hardware Clock
(PHC) subsystem to use the 64 bit version of the timespec structure,
making the core API ready for the year 2038.

In addition, I reviewed how each driver and device represents the time
value at the hardware register level.  Most of the drivers are ready,
but a few will need some work before the year 2038, as shown:

   Patch   Driver
   ------------------------------------------------
   12      drivers/net/ethernet/intel/igb/igb_ptp.c
   15 ?    drivers/net/ethernet/sfc/ptp.c
   16      drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c

The commit log messages document how each driver is ready or why it is
not ready.  For patch 15, I could not easily find out the hardware
representation of the time value, and so the SFC maintainers will have
to review their low level code in order to resolve any remaining
issues.

* ChangeLog
** V3
   - dp83640: use timespec64 throughout per Arnd's suggestion
   - tilegx: use timespec64 throughout per Chris' suggestion
   - add Jeff's acked-bys
** V2
   - use the new methods in the posix clock code right away (patch #3)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

All of the PHC drivers have been converted to the new methods.  This patch
converts the three remaining callers within the core code and removes the
older methods for good.  As a result, the core PHC code is ready for the
year 2038.  However, some of the PHC drivers are not quite ready yet.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device has a 64 bit clock register, where each clock tick is 32
nanoseconds, and so with this patch the driver is ready for the year
2038.

Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device has a 64 bit clock register, where each clock tick is 16
nanoseconds, and so with this patch the driver is ready for the year
2038.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>