When used on cgroup1, bfq uses the blkg->stat_bytes and ->stat_ios
from blk-cgroup core to populate six stat knobs.  blk-cgroup core is
moving away from blkg_rwstat to improve scalability and won't be able
to support this usage.

It isn't like the sharing gains all that much.  Let's break it out to
dedicated rwstat counters which are updated when on cgroup1.  This
makes use of bfqg_*rwstat*() helpers outside of
CONFIG_BFQ_CGROUP_DEBUG.  Move them out.

v2: Compile fix when !CONFIG_BFQ_CGROUP_DEBUG.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Collect them right under #ifdef CONFIG_BFQ_CGROUP_DEBUG.  The next
patch will use them from !DEBUG path and this makes it easy to move
them out of the ifdef block.

This is pure code reorganization.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.

* for-linus: (942 commits)
  blkcg: make blkcg_print_stat() print stats only for online blkgs
  nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
  nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
  nvme-rdma: fix a segmentation fault during module unload
  iocost: don't nest spin_lock_irq in ioc_weight_write()
  io_uring: ensure we clear io_kiocb->result before each issue
  um-ubd: Entrust re-queue to the upper layers
  nvme-multipath: remove unused groups_only mode in ana log
  nvme-multipath: fix possible io hang after ctrl reconnect
  io_uring: don't touch ctx in setup after ring fd install
  io_uring: Fix leaked shadow_req
  Linux 5.4-rc5
  riscv: cleanup do_trap_break
  nbd: verify socket is supported during setup
  ata: libahci_platform: Fix regulator_get_optional() misuse
  nbd: handle racing with error'ed out commands
  nbd: protect cmd->status with cmd->lock
  io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
  io_uring: used cached copies of sq->dropped and cq->overflow
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  ...

Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and
BLKFINISHZONE to allow applications to control the condition of zones
on a zoned block device through the execution of the REQ_OP_ZONE_OPEN,
REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations.

Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
  actively be written
* Close a zone: Transition to closed condition to release the drive
  resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
  condition to prevent write operations

To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.

Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is no need for the function __blkdev_reset_all_zones() as
REQ_OP_ZONE_RESET_ALL can be handled directly in blkdev_reset_zones()
bio loop with an early break from the loop. This patch removes this
function and modifies blkdev_reset_zones(), simplifying the code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

REQ_OP_ZONE_RESET operations cannot be merged as these bios and requests
do not have a size and are never sequential due to the zone start sector
position required for their execution. As a result, there is no point in
using a plug around blkdev_reset_zones() bio issuing loop. This patch
removes this unnecessary plugging.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg_print_stat() iterates blkgs under RCU and doesn't test whether
the blkg is online.  This can call into pd_stat_fn() on a pd which is
still being initialized leading to an oops.

The heaviest operation - recursively summing up rwstat counters - is
already done while holding the queue_lock.  Expand queue_lock to cover
the other operations and skip the blkg if it isn't online yet.  The
online state is protected by both blkcg and queue locks, so this
guarantees that only online blkgs are processed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Roman Gushchin <guro@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Fixes: 903d23f0 ("blk-cgroup: allow controllers to output their own stats")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With transition to blk-mq, the elevator= kernel argument was removed as
it makes less and less sense with the current variety of devices.  Since
this may surprise some users and there are advices on the Internet that
still suggest to use it, let's at least warn if the parameter is used.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Keith:

"We have a few late nvme fixes for a couple device removal kernel
 crashes, and a compat fix for a new ioctl introduced during this merge
 window."

* 'nvme-5.4-rc7' of git://git.infradead.org/nvme:
  nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
  nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
  nvme-rdma: fix a segmentation fault during module unload

Changing nvme_passthru_cmd64 to add a field: rsvd2. This field is an explicit
marker for the padding space added on certain platforms as a result of the
enlargement of the result field from 32 bit to 64 bits in size, and
fixes differences in struct size when using compat ioctl for 32-bit
binaries on 64-bit architecture.

Fixes: 65e68edc ("nvme: allow 64-bit results in passthru commands")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Charles Machalow <csm10495@gmail.com>
[changelog]
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme_mpath_clear_ctrl_paths() iterates through
the ctrl->namespaces list while holding ctrl->scan_lock.
This does not seem to be the correct way of protecting
from concurrent list modification.

Specifically, nvme_scan_work() sorts ctrl->namespaces
AFTER unlocking scan_lock.

This may result in the following (rare) crash in ctrl disconnect
during scan_work:

    BUG: kernel NULL pointer dereference, address: 0000000000000050
    Oops: 0000 [#1] SMP PTI
    CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic
    RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core]
    ...
    Call Trace:
     nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core]
     nvme_remove_namespaces+0x35/0xe0 [nvme_core]
     nvme_do_delete_ctrl+0x47/0x90 [nvme_core]
     nvme_sysfs_delete+0x49/0x60 [nvme_core]
     dev_attr_store+0x17/0x30
     sysfs_kf_write+0x3e/0x50
     kernfs_fop_write+0x11e/0x1a0
     __vfs_write+0x1b/0x40
     vfs_write+0xb9/0x1a0
     ksys_write+0x67/0xe0
     __x64_sys_write+0x1a/0x20
     do_syscall_64+0x5a/0x130
     entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f8d02bfb154

Fix:
After taking scan_lock in nvme_mpath_clear_ctrl_paths()
down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe.
This will not cause deadlocks because taking scan_lock never happens
while holding the namespaces_rwsem.
Moreover, scan work downs namespaces_rwsem in the same order.

Alternative: sort ctrl->namespaces in nvme_scan_work()
while still holding the scan_lock.
This would leave nvme_mpath_clear_ctrl_paths() without correct protection
against ctrl->namespaces modification by anyone other than scan_work.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

In case there are controllers that are not associated with any RDMA
device (e.g. during unsuccessful reconnection) and the user will unload
the module, these controllers will not be freed and will access already
freed memory. The same logic appears in other fabric drivers as well.

Fixes: 87fd1253 ("nvme-rdma: remove redundant reference between ib_device and tagset")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

__blk_queue_split() adds significant overhead for small I/O operations.
Add a shortcut to avoid it for cases where we know we never need to
split.

Based on a patch from Ming Lei.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

8962842c ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.

Fixes: 8962842c ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch introduces Opal Datastore UID.
The generic read/write table ioctl can use this UID
to access the Opal Datastore.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This feature gives the user RW access to any opal table with admin1
authority. The flags described in the new structure determines if the user
wants to read/write the data. Flags are checked for valid values in
order to allow future features to be added to the ioctl.

The user can provide the desired table's UID. Also, the ioctl provides a
size and offset field and internally will loop data accesses to return
the full data block. Read overrun is prevented by the initiator's
sec_send_recv() backend. The ioctl provides a private field with the
intention to accommodate any future expansions to the ioctl.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch refactors the existing "write_shadowmbr" func and
creates a new generalized function "generic_table_write_data",
to write data to any opal table. Also, a few cleanups are included
in this patch.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently, block device size in not updated on second and further open
for block devices where partition scan is disabled. This is particularly
annoying for example for DVD drives as that means block device size does
not get updated once the media is inserted into a drive if the device is
already open when inserting the media. This is actually always the case
for example when pktcdvd is in use.

Fix the problem by revalidating block device size on every open even for
devices with partition scan disabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Factor out code handling revalidation of bdev on disk change into a
common helper.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It is reported that sysfs buffer overflow can be triggered if the system
has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of
hctx via /sys/block/$DEV/mq/$N/cpu_list.

Use snprintf to avoid the potential buffer overflow.

This version doesn't change the attribute format, and simply stops
showing CPU numbers if the buffer is going to overflow.

Cc: stable@vger.kernel.org
Fixes: 676141e4("blk-mq: don't dump CPU -> hw queue map on driver load")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since commit 97889f9a ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()"), the return value of blk_mq_run_hw_queue()
is never checked, so make it return void, which very marginally simplifies
the code.
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This code causes a static analysis warning:

    block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'

We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish().  IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.

Fixes: 7caa4715 ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We use io_kiocb->result == -EAGAIN as a way to know if we need to
re-submit a polled request, as -EAGAIN reporting happens out-of-line
for IO submission failures. This field is cleared when we originally
allocate the request, but it isn't reset when we retry the submission
from async context. This can cause issues where we think something
needs a re-issue, but we're really just reading stale data.

Reset ->result whenever we re-prep a request for polled submission.

Cc: stable@vger.kernel.org
Fixes: 9e645e11 ("io_uring: add support for sqe links")
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fixes crashes due to ubd requeue logic conflicting with the block-mq
logic. Crash is reproducible in 5.0 - 5.3.

Fixes: 53766def ("um: Clean-up command processing in UML UBD driver")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

groups_only mode in nvme_read_ana_log() is no longer used: remove it.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
   NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
   This fails because ctrl disconnects.
   Therefore nvme_update_ns_ana_state() is not called
   and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
   nvme_read_ana_log(ctrl, groups_only=true).
   However, nvme_update_ana_state() does not update namespaces
   because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.

Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.

More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.

Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.

Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

syzkaller reported an issue where it looks like a malicious app can
trigger a use-after-free of reading the ctx ->sq_array and ->rings
value right after having installed the ring fd in the process file
table.

Defer ring fd installation until after we're done reading those
values.

Fixes: 75b28aff ("io_uring: allocate the two rings together")
Reported-by: syzbot+6f03d895a6cd0d06187f@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_queue_link_head() owns shadow_req after taking it as an argument.
By not freeing it in case of an error, it can leak the request along
with taken ctx->refs.
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the VMWare guest support:

   - Unbreak VMWare platform detection which got wreckaged by converting
     an integer constant to a string constant.

   - Fix the clang build of the VMWAre hypercall by explicitely
     specifying the ouput register for INL instead of using the short
     form"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
  x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes for time(keeping):

   - Add a missing include to prevent compiler warnings.

   - Make the VDSO implementation of clock_getres() POSIX compliant
     again. A recent change dropped the NULL pointer guard which is
     required as NULL is a valid pointer value for this function.

   - Fix two function documentation typos"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Fix two trivial comments
  timers/sched_clock: Include local timekeeping.h for missing declarations
  lib/vdso: Make clock_getres() POSIX compliant again

Pull perf fixes from Thomas Gleixner:
 "A set of perf fixes:

  kernel:

   - Unbreak the tracking of auxiliary buffer allocations which got
     imbalanced causing recource limit failures.

   - Fix the fallout of splitting of ToPA entries which missed to shift
     the base entry PA correctly.

   - Use the correct context to lookup the AUX event when unmapping the
     associated AUX buffer so the event can be stopped and the buffer
     reference dropped.

  tools:

   - Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
     /proc/kcore

   - Fix freeing id arrays in the event list so the correct event is
     closed.

   - Sync sched.h anc kvm.h headers with the kernel sources.

   - Link jvmti against tools/lib/ctype.o to have weak strlcpy().

   - Fix multiple memory and file descriptor leaks, found by coverity in
     perf annotate.

   - Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
     by a static analysis tool"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/aux: Fix AUX output stopping
  perf/aux: Fix tracking of auxiliary trace buffer allocation
  perf/x86/intel/pt: Fix base for single entry topa
  perf kmem: Fix memory leak in compact_gfp_flags()
  tools headers UAPI: Sync sched.h with the kernel
  tools headers kvm: Sync kvm.h headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  perf c2c: Fix memory leak in build_cl_output()
  perf tools: Fix mode setting in copyfile_mode_ns()
  perf annotate: Fix multiple memory and file descriptor leaks
  perf tools: Fix resource leak of closedir() on the error paths
  perf evlist: Fix fix for freed id arrays
  perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()

Pull irq fixes from Thomas Gleixner:
 "Two fixes for interrupt controller drivers:

   - Skip IRQ_M_EXT entries in the device tree when initializing the
     RISCV PLIC controller to avoid a double init attempt.

   - Use the correct ITS list when issuing the VMOVP synchronization
     command so the operation works only on the ITS instances which are
     associated to a VM"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Skip contexts except supervisor in plic_init()
  irqchip/gic-v3-its: Use the exact ITSList for VMOVP

Pull cifs fixes from Steve French:
 "Seven cifs/smb3 fixes, including three for stable"

* tag '5.4-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs
  CIFS: Fix use after free of file info structures
  CIFS: Fix retry mid list corruption on reconnects
  cifs: Fix missed free operations
  CIFS: avoid using MID 0xFFFF
  cifs: clarify comment about timestamp granularity for old servers
  cifs: Handle -EINPROGRESS only when noblockcnt is set

Pull RISC-V fixes from Paul Walmsley:
 "Several minor fixes and cleanups for v5.4-rc5:

   - Three build fixes for various SPARSEMEM-related kernel
     configurations

   - Two cleanup patches for the kernel bug and breakpoint trap handler
     code"

* tag 'riscv/for-v5.4-rc5-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: cleanup do_trap_break
  riscv: cleanup <asm/bug.h>
  riscv: Fix undefined reference to vmemmap_populate_basepages
  riscv: Fix implicit declaration of 'page_to_section'
  riscv: fix fs/proc/kcore.c compilation with sparsemem enabled

Pull MIPS fixes from Paul Burton:
 "A few MIPS fixes:

   - Fix VDSO time-related function behavior for systems where we need
     to fall back to syscalls, but were instead returning bogus results.

   - A fix to TLB exception handlers for Cavium Octeon systems where
     they would inadvertently clobber the $1/$at register.

   - A build fix for bcm63xx configurations.

   - Switch to using my @kernel.org email address"

* tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: tlbex: Fix build_restore_pagemask KScratch restore
  MIPS: bmips: mark exception vectors as char arrays
  mips: vdso: Fix __arch_get_hw_counter()
  MAINTAINERS: Use @kernel.org address for Paul Burton

Pull tty/serial driver fix from Greg KH:
 "Here is a single tty/serial driver fix for 5.4-rc5 that resolves a
  reported issue.

  It has been in linux-next for a while with no problems"

* tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  8250-men-mcb: fix error checking when get_num_ports returns -ENODEV

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix, for the wlan-ng driver, that
  resolves a reported issue.

  It is been in linux-next for a while with no reported issues"

* tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS

Pull driver core fix from Greg KH:
 "Here is a single sysfs fix for 5.4-rc5.

  It resolves an error if you actually try to use the __BIN_ATTR_WO()
  macro, seems I never tested it properly before :(

  This has been in linux-next for a while with no reported issues"

* tag 'driver-core-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: Fixes __BIN_ATTR_WO() macro