- 26 Aug, 2010 4 commits
-
-
Breno Leitao authored
Qlge is freeing the buffers before stopping the card DMA, and this can cause some severe error, as a EEH event on PPC. This patch just stop the card and then free the resources. Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
Ron Mercer <ron.mercer@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
close https://bugzilla.kernel.org/show_bug.cgi?id=16529 Before calling dev_forward_skb(), we should make sure skb head contains at least an ethernet header, even if length included in upper layer said so. Use pskb_may_pull() to make sure this ethernet header is present in skb head. Reported-by:
Thomas Heil <heil@terminal-consulting.de> Reported-by:
Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
KOSAKI Motohiro authored
This issue come from ruby language community. Below test program hang up when only run on Linux. % uname -mrsv Linux 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 % ruby -rsocket -ve ' BasicSocket.do_not_reverse_lookup = true serv = TCPServer.open("127.0.0.1", 0) s1 = TCPSocket.open("127.0.0.1", serv.addr[1]) s2 = serv.accept s2.close s1.write("a") rescue p $! s1.write("a") rescue p $! Thread.new { s1.write("a") }.join' ruby 1.9.3dev (2010-07-06 trunk 28554) [i686-linux] #<Errno::EPIPE: Broken pipe> [Hang Here] FreeBSD, Solaris, Mac doesn't. because Ruby's write() method call select() internally. and tcp_poll has a bug. SUS defined 'ready for writing' of select() as following. | A descriptor shall be considered ready for writing when a call to an output | function with O_NONBLOCK clear would not block, whether or not the function | would transfer data successfully. That said, EPIPE situation is clearly one of 'ready for writing'. We don't have read-side issue because tcp_poll() already has read side shutdown care. | if (sk->sk_shutdown & RCV_SHUTDOWN) | mask |= POLLIN | POLLRDNORM | POLLRDHUP; So, Let's insert same logic in write side. - reference url http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31065 http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31068Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Eric Dumazet authored
As discovered by Anton Blanchard, current code to autotune tcp_death_row.sysctl_max_tw_buckets, sysctl_tcp_max_orphans and sysctl_max_syn_backlog makes little sense. The bigger a page is, the less tcp_max_orphans is : 4096 on a 512GB machine in Anton's case. (tcp_hashinfo.bhash_size * sizeof(struct inet_bind_hashbucket)) is much bigger if spinlock debugging is on. Its wrong to select bigger limits in this case (where kernel structures are also bigger) bhash_size max is 65536, and we get this value even for small machines. A better ground is to use size of ehash table, this also makes code shorter and more obvious. Based on a patch from Anton, and another from David. Reported-and-tested-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
- 25 Aug, 2010 1 commit
-
-
David S. Miller authored
As reported by Anton Blanchard when we use percpu_counter_read_positive() to make our orphan socket limit checks, the check can be off by up to num_cpus_online() * batch (which is 32 by default) which on a 128 cpu machine can be as large as the default orphan limit itself. Fix this by doing the full expensive sum check if the optimized check triggers. Reported-by:
-
- 24 Aug, 2010 10 commits
-
-
Dan Carpenter authored
Casting "pep->tx_desc_dma" to to a struct tx_desc pointer makes gcc complain: drivers/net/pxa168_eth.c:657: warning: cast to pointer from integer of different size Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The phy_mii_ioctl() function changed recently. It now takes a struct ifreq pointer directly. Signed-off-by:
-
Dan Carpenter authored
A couple issues here: * Some resources weren't released. * If alloc_etherdev() failed it would have caused a NULL dereference because "pep" would be null when we checked "if (pep->clk)". * Also it's better to propagate the error codes from mdiobus_register() instead of just returning -ENOMEM. Signed-off-by:
-
Dan Carpenter authored
"pep->pd" isn't checked consistently in this function. For example it's dereferenced unconditionally on the next line after the end of the if condition. This function is only called from pxa168_eth_probe() and pep->pd is always non-NULL so I removed the check. Signed-off-by:
-
Anton Vorontsov authored
It is possible that phylib will call adjust_link before returning from {,of_}phy_connect(), which may cause the following [very rare, though] oops upon reopening the device: Unable to handle kernel paging request for data at address 0x0000024c Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0 P1021 RDB Modules linked in: NIP: c0345dac LR: c0345dac CTR: c0345d84 TASK = dffab6b0[30] 'events/0' THREAD: c0d24000 CPU: 0 [...] NIP [c0345dac] adjust_link+0x28/0x19c LR [c0345dac] adjust_link+0x28/0x19c Call Trace: [c0d25f00] [000045e1] 0x45e1 (unreliable) [c0d25f30] [c036c158] phy_state_machine+0x3ac/0x554 [...] Here is why. Drivers store phydev in their private structures, e.g. gianfar driver: static int init_phy(struct net_device *dev) { ... priv->phydev = of_phy_connect(...); ... } So that adjust_link could retrieve it back: static void adjust_link(struct net_device *dev) { ... struct phy_device *phydev = priv->phydev; ... } If the device has been opened before, then phydev->state is set to PHY_HALTED (or undefined if the driver didn't call phy_stop()). Now, phy_connect starts the PHY state machine before returning phydev to the driver: phy_start_machine(phydev, NULL); if (phydev->irq > 0) phy_start_interrupts(phydev); return phydev; The time between 'phy_start_machine()' and 'return phydev' is undefined. The start machine routine delays execution for 1 second, which is enough for most cases. But under heavy load, or if you're unlucky, it is quite possible that PHY state machine will execute before phy_connect() returns, and so adjust_link callback will try to dereference phydev, which is not yet ready. To fix the issue, simply initialize the PHY's state to PHY_READY during phy_attach(). This will ensure that phylib won't call adjust_link before phy_start(). Signed-off-by:Anton Vorontsov <avorontsov@mvista.com> Signed-off-by:
-
Heiko Carstens authored
Fix this error on an s390 allyesconfig build: linux-2.6/drivers/net/caif/caif_spi.c:98: undefined reference to `dma_free_coherent' Cc: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Neil Horman authored
If netconsole is in use, there is a possibility for deadlock in 3c59x between boomerang_interrupt and boomerang_start_xmit. Both routines take the vp->lock, and if netconsole is in use, a pr_* call from the boomerang_interrupt routine will result in the netconsole code attempting to trnasmit an skb, which can try to take the same spin lock, resulting in deadlock. The fix is pretty straightforward. This patch allocats a bit in the 3c59x private structure to indicate that its handling an interrupt. If we get into the transmit routine and that bit is set, we can be sure that we have recursed and will deadlock if we continue, so instead we just return NETDEV_TX_BUSY, so the stack requeues the skb to try again later. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Yinglin Luan authored
Function qlcnic_intr has pointer to qlcnic_host_sds_ring as second parameter not pointer to qlcnic_adapter. Signed-off-by:
Yinglin Luan <synmyth@gmail.com> Signed-off-by:
-
Yinglin Luan authored
Function netxen_intr has pointer to nx_host_sds_ring as second parameter not pointer to netxen_adapter. Signed-off-by:
-
Changli Gao authored
nf_bridge_alloc() always reset the skb->nf_bridge, so we should always put the old one. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
Bart De Schuymer <bdschuym@pandora.be> Signed-off-by:
-
- 23 Aug, 2010 3 commits
-
-
Florian Westphal authored
commit f3c5c1bf (netfilter: xtables: make ip_tables reentrant) forgot to also compute the jumpstack size in the compat handlers. Result is that "iptables -I INPUT -j userchain" turns into -j DROP. Reported by Sebastian Roesner on #netfilter, closes http://bugzilla.netfilter.org/show_bug.cgi?id=669. Note: arptables change is compile-tested only. Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
-
Randy Dunlap authored
Why wouldn't kconfig symbol ISDN_DRV_AVMB1_B1PCMCIA also depend on PCMCIA? Fix build for PCMCIA not enabled: ERROR: "b1_free_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1ctl_proc_fops" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_reset_ctr" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_load_firmware" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_send_message" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_release_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_register_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_getrevision" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_detect" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_interrupt" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_alloc_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Paeth <calle@calle.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by:
-
Changli Gao authored
__packed is only defined in kernel space, so we should use __attribute__((packed)) for the code shared between kernel and user space. Two __attribute() annotations are replaced with __attribute__() too. Signed-off-by:
-
- 19 Aug, 2010 19 commits
-
-
-
Bruce Allan authored
From: Bruce Allan <bruce.w.allan@intel.com> The alternate MAC address feature is only supported by 80003ES2LAN and 82571 LOMs as well as a couple 82571 mezzanine cards. Checking for an alternate MAC address on other parts can fail leading to the driver not able to load. This patch limits the check for an alternate MAC address to be done only for parts that support the feature. This issue has been around since support for the feature was introduced to the e1000e driver in 2.6.34. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Reported-by:
Fabio Varesano <fax8@users.sourceforge.net> Cc: stable@kernel.org Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Bruce Allan authored
On the e1000-devel mailing list, Nils Faerber reported latency issues with the 82573 LOM on a ThinkPad X60. It was found to be caused by ASPM L1; disabling it resolves the latency. The issue is present in kernels back to 2.6.34 and possibly 2.6.33. Reported-by:
Nils Faerber <nils.faerber@kernelconcepts.de> Signed-off-by:
-
Michal Simek authored
Functions ll_temac_rx_irq and ll_temac_tx_irq have pointer to net_device as second parameter not pointer to temac_local. Signed-off-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Eric Dumazet authored
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by:
-
Eric Dumazet authored
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by:
-
Eric Dumazet authored
After skb is queued, its illegal to dereference it. Cache skb->len into a temporary variable. Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Amit Kumar Salecha authored
Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Amit Kumar Salecha authored
Spin lock rds_ring->lock is used in poll routine, so other users should use spin_lock_bh(). While posting rx buffers from netxen_nic_attach, rds_ring->lock is not required, so cleaning it instead of fixing it by spin_lock_bh(). Signed-off-by:
-
Phil Oester authored
When adding a new vlan, if the underlying interface has no carrier, then the newly added vlan interface should also have no carrier. At present, this is not true - the newly added vlan is added with carrier up. Fix by checking state of real device. Signed-off-by:
Phil Oester <kernel@linuxace.com> Signed-off-by:
-
Robert Jennings authored
This fixes the following opps which can occur when trying to deallocate receive buffer pools when changing the MTU of an active ibmveth device. Oops: Kernel access of bad area, sig: 11 [#1] NIP: d000000004db00e8 LR: d000000004db00ac CTR: 0000000000591038 REGS: c00000007fff39d0 TRAP: 0300 Not tainted (2.6.36-rc1) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 22248244 XER: 00000002 DAR: 0000000000000488, DSISR: 0000000042000000 TASK = c00000007c463790[6531] 'netserver' THREAD: c00000007a154000 CPU: 0 GPR00: 0000000000000000 c00000007fff3c50 d000000004dbd360 0000000000000001 GPR04: 0000000000000001 1fffffffffffffff 000000000000043c c00000007a8e9f60 GPR08: c00000007a8e9e20 0000000000000245 0000000000000488 0000000000000000 GPR12: 00000000000000c0 c000000006d70000 c00000007bfec098 c00000007bfebc2c GPR16: c00000007a157c78 0000000000000000 0000000000000001 0000000000000000 GPR20: 0000000000000001 0000000000000010 c000000000b51180 c00000007a8e9d90 GPR24: c00000007a8e9da0 c00000007a8e9580 00000000000005ea 00000000000002ff GPR28: 0000000000000004 0000000000000080 c000000000a946f8 c00000007a8e9d80 NIP [d000000004db00e8] .ibmveth_remove_buffer_from_pool+0xe8/0x130 [ibmveth] LR [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] Call Trace: [c00000007fff3c50] [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] (unreliable) [c00000007fff3cf0] [d000000004db31dc] .ibmveth_poll+0x30c/0x460 [ibmveth] [c00000007fff3dd0] [c00000000042c4b8] .net_rx_action+0x178/0x278 [c00000007fff3eb0] [c000000000093cf0] .__do_softirq+0x118/0x1f8 [c00000007fff3f90] [c00000000002ab3c] .call_do_softirq+0x14/0x24 [c00000007a157600] [c00000000000e3e4] .do_softirq+0xec/0x110 [c00000007a1576a0] [c000000000093394] .local_bh_enable_ip+0xb4/0xe0 [c00000007a157720] [c0000000004f0bac] ._raw_spin_unlock_bh+0x3c/0x50 [c00000007a157790] [c0000000004186e0] .release_sock+0x158/0x188 [c00000007a157840] [c000000000479660] .tcp_recvmsg+0x560/0x9b8 [c00000007a157970] [c0000000004a0d78] .inet_recvmsg+0x80/0xd8 [c00000007a157a00] [c000000000413e28] .sock_recvmsg+0x128/0x178 [c00000007a157bf0] [c0000000004164ac] .SyS_recvfrom+0xb4/0x148 [c00000007a157d70] [c000000000411f3c] .SyS_socketcall+0x274/0x360 [c00000007a157e30] [c0000000000085b4] syscall_exit+0x0/0x40 Reported-by:
Rafael Camarda Silva Folco <rfolco@linux.vnet.ibm.com> Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Andre Detsch authored
ehea: Fix synchronization between HW and SW send queue When memory is added to / removed from a partition via the Memory DLPAR mechanism, the eHEA driver has to do a couple of things to reflect the memory change in its own IO address translation tables. This involves stopping and restarting the HW queues. During this operation, it is possible that HW and SW pointer into these queues get out of sync. This results in a situation where packets that are attached to a send queue are not transmitted immediately, but delayed until further X packets have been put on the queue. This patch detects such loss of synchronization, and resets the ehea port when needed. Signed-off-by:
Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by:
Andre Detsch <adetsch@br.ibm.com> Signed-off-by:
-
Yaniv Rosner authored
Update bnx2x version to 1.52.53-4 Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
PHY locking is required between two ports for some external PHYs. Since initialization was done in the common init function (called only on the first port initialization) rather than in the port init function, there was in fact no PHY locking between the ports. Signed-off-by:
-
Eric Dumazet authored
struct rds_rdma_notify contains a 32 bits hole on 64bit arches, make sure it is zeroed before copying it to user. Signed-off-by:
-
Johannes Berg authored
Since commit 1dacc76d Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Jul 1 11:26:02 2009 +0000 net/compat/wext: send different messages to compat tasks we had a race condition when setting and then restoring frag_list. Eric attempted to fix it, but the fix created even worse problems. However, the original motivation I had when I added the code that turned out to be racy is no longer clear to me, since we only copy up to skb->len to userspace, which doesn't include the frag_list length. As a result, not doing any frag_list clearing and restoring avoids the race condition, while not introducing any other problems. Additionally, while preparing this patch I found that since none of the remaining netlink code is really aware of the frag_list, we need to use the original skb's information for packet information and credentials. This fixes, for example, the group information received by compat tasks. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@kernel.org [2.6.31+, for 2.6.35 revert 1235f504] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
-
Sam Ravnborg authored
"make headers_check" issued the following warning: CHECK include/linux/netfilter (64 files) usr/include/linux/netfilter/xt_ipvs.h:19: found __[us]{8,16,32,64} type without #include <linux/types.h> Fix this by as suggested including linux/types.h. Signed-off-by:Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Sachin Sanap authored
Signed-off-by:
Sachin Sanap <ssanap@marvell.com> Signed-off-by:
-
- 18 Aug, 2010 3 commits
-
-
Wey-Yi Guy authored
For 5000 series of devices, use long monitor timer to check stuck tx queues. This modification apply to all the 5000 series including 5300 and others. Cc: stable@kernel.org [2.6.35] Reported-by:
drago01 <drago01@gmail.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Joe Perches authored
Commit c96c31e4 "(drivers/net/wireless: Use wiphy_<level>)" inadvertently changed some upper case words to lower case. Restore the original case. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Jarek Poplawski authored
>Xin Xiaohui wrote: > I looked into the code dev_gro_receive(), found the code here: > if the frags[0] is pulled to 0, then the page will be released, > and memmove() frags left. > Is that right? I'm not sure if memmove do right or not, but > frags[0].size is never set after memove at least. what I think > a simple way is not to do anything if we found frags[0].size == 0. > The patch is as followed. ... This version of the patch fixes the bug directly in memmove. Reported-by:
"Xin, Xiaohui" <xiaohui.xin@intel.com> Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
