If there is only one match, the unique matched entry should be returned.

Without the fix, the upcoming dma debug interfaces ("dma-debug: new
interfaces to debug dma mapping errors") can't work reliably because
only device and dma_addr are passed to dma_mapping_error().
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: Shuah Khan <shuah.khan@hp.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Thierry reported that the "iron out" patch for isolate_freepages_block()
had problems due to the strict check being too strict with "mm:
compaction: Iron out isolate_freepages_block() and
isolate_freepages_range() -fix1".  It's possible that more pages than
necessary are isolated but the check still fails and I missed that this
fix was not picked up before RC1.  This same problem has been identified
in 3.7-RC1 by Tony Prisk and should be addressed by the following patch.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Tony Prisk <linux@prisktech.co.nz>
Reported-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix this build error:

  drivers/firmware/memmap.c:240:19: error: conflicting types for 'memmap_init'
  arch/ia64/include/asm/pgtable.h:565:17: note: previous declaration of 'memmap_init' was here
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_pid_ns() operates in a recursive fashion:

free_pid_ns(parent)
  put_pid_ns(parent)
    kref_put(&ns->kref, free_pid_ns);
      free_pid_ns

thus if there was a huge nesting of namespaces the userspace may trigger
avalanche calling of free_pid_ns leading to kernel stack exhausting and a
panic eventually.

This patch turns the recursion into an iterative loop.

Based on a patch by Andrew Vagin.

[akpm@linux-foundation.org: export put_pid_ns() to modules]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Calling uname() with the UNAME26 personality set allows a leak of kernel
stack contents.  This fixes it by defensively calculating the length of
copy_to_user() call, making the len argument unsigned, and initializing
the stack buffer to zero (now technically unneeded, but hey, overkill).

CVE-2012-0957
Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 5ab1c309 ("coredump: pass siginfo_t* to do_coredump() and
below, not merely signr") added siginfo_t to linux/coredump.h but forgot
to include asm/siginfo.h.  This breaks the build for UML/i386.  (And any
other arch where asm/siginfo.h is not magically preincluded...)

  In file included from arch/x86/um/elfcore.c:2:0: include/linux/coredump.h:15:25: error: unknown type name 'siginfo_t'
  make[1]: *** [arch/x86/um/elfcore.o] Error 1
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull media fixes from Mauro Carvalho Chehab:
 "Media fixes for:
   - one Kconfig fix patch;
   - one patch fixing DocBook breakage due to the drivers/media UAPI
     changes;
   - the remaining UAPI media changes (DVB API).

  I'm aware that is is a little late for the UAPI renames for the DVB
  API, but IMHO, it is better to merge it for 3.7, due to two reasons:

   1) There is a major rename at 3.7 (not only uapi changes, but also
      the entire media drivers were reorganized on 3.7, in order to
      simplify the Kconfig logic, and easy drivers selection, especially
      for hybrid devices).  By confining all those renames there at 3.7
      it will cause all the harm at for media developers on just one
      shot.  Stable backports upstream and at distros will likely
      welcome it as well, as they won't need to check what changed on
      3.7 and what was postponed for on 3.8.

   2) The V4L2 DocBook Makefile creates a cross-reference between the
      media API headers and the specs.  This helps us _a_lot_ to be sure
      that all API improvements are properly documented.  Every time a
      header changes from one place to another, DocBook/media/Makefile
      needs to be patched.  Currently, the DocBook breakage patch
      depends on the DVB UAPI."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] Kconfig: Fix dependencies for driver autoselect options
  DocBook/media/Makefile: Fix build due to uapi breakage
  UAPI: (Scripted) Disintegrate include/linux/dvb

Calling convention for internal functions and 'asmlinkage' functions is
different on x86-32. Therefore do not directly cast aesni_enc as XTS tweak
function, but use wrapper function in between. Fixes crash with "XTS +
aesni_intel + x86-32" combination.

Cc: stable@vger.kernel.org
Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 38f38657 ("xattr: extract simple_xattr code from tmpfs") moved
some code from tmpfs but introduced a subtle bug along the way.

If the name passed to simple_xattr_remove() does not exist in the list of
xattrs, then it is possible to call kfree(new_xattr) when new_xattr is
actually initialized to itself on the stack via uninitialized_var().

This causes a BUG() since the memory was not allocated via the slab
allocator and was not bypassed through to the page allocator because it
was too large.

Initialize the local variable to NULL so the kfree() never takes place.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MIPS fixes from Ralf Baechle:
 "Random small fixes across the MIPS code."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: CMP: Fix physical core number calculation logic
  MIPS: JZ4740: Forward declare struct uart_port in header.
  MIPS: JZ4740: Fix '#include guard' in serial.h
  MIPS: hugetlbfs: Fix hazard between tlb write and pagemask restoration.
  MIPS: Restore pagemask after dumping the TLB.
  MIPS: Hugetlbfs: Handle huge pages correctly in pmd_bad()
  MIPS: R5000: Fix TLB hazard handling.
  MIPS: tlbex: Deal with re-definition of label
  MIPS: Make __{,n,u}delay declarations match definitions and generic delay.h

Pull powerpc fixes from Benjamin Herrenschmidt:
 "Here are a handful of powerpc related fixes."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  cpuidle/powerpc: Fix snooze state problem in the cpuidle design on pseries.
  cpuidle/powerpc: Fix smt_snooze_delay functionality.
  cpuidle/powerpc: Fix target residency initialisation in pseries cpuidle
  powerpc: Build fix for powerpc KVM
  Revert "powerpc/perf: Use pmc_overflow() to detect rolled back events"

Pull DeviceTree fixes from Rob Herring:
 "A handful of fixes:
   - a fix for dtc from upstream
   - sparse fixes in DeviceTree code
   - stub of_get_child_by_name for !OF builds"

* tag 'dt-fixes-for-3.7' of git://sources.calxeda.com/kernel/linux:
  dtc: fix for_each_*() to skip first object if deleted
  of/platform: sparse fix
  of/irq: sparse fixes
  of/address: sparse fixes
  of: add stub of_get_child_by_name for non-OF builds

Pull sound fixes from Takashi Iwai:
 "Significant changes are:
   - A regression fix for the new HD-audio LPIB delay counting,
     VGA-switcheroo race fix
   - ASoC ams-delta fix for the broken driver loading

  Otherwise a collection of mostly small / trivial fixes."

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: emu10k1: add chip details for E-mu 1010 PCIe card
  ALSA: hda - Always check array bounds in alc_get_line_out_pfx
  ASoC: bells: Correct typo in sub speaker DAI name for WM5110
  ALSA: hda - Stop LPIB delay counting on broken hardware
  ALSA: hda - Fix registration race of VGA switcheroo
  ALSA: hda - Clean up superfluous position_fix list entries
  ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()
  ASoC: codecs: da9055: Minor improvement in ALC calibration process
  ASoC: dmaengine: Correct Makefile when sound is built as module
  ASoC: fsi: don't reschedule DMA from an atomic context
  ASoC: fix documentation in soc-jack
  ARM: pxa: Fix build error caused by sram.h rename
  ASoC: wm2200: Fix non-inverted OUT2 mute control
  ASoC: wm2200: Use rev A register patches on rev B
  ASoC: bells: Correct typo in sub speaker DAI name for WM5110
  ASoC: ams-delta: Convert to use snd_soc_register_card()
  ASoC: omap-mcpdm: Remove OMAP revision check
  ASoC: Fix wrong include for McPDM
  ASoC: omap-abe-twl6040: Fix typo of Vibrator
  ASoC: twl6040: Fix Stream DAPM mapping

The CPUNum Field in EBase register is 10bit wide, so after 1 bit right
shift, the mask value should be 0x1ff.
Signed-off-by: jerin jacob <jerinjacobk@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4420/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Earlier without cpuidle framework on pseries, the native arch
idle routine comprised of both snooze and nap
states.  smt_snooze_delay variable was used to delay
the idle process entry to deeper idle state like  nap.
With the coming of cpuidle, this arch specific idle was replaced
by two different idle routines, one for supporting snooze and other
for nap. This enabled addition of more
low level idle states on pseries in the future.

On adopting the generic cpuidle framework for POWER systems,
the decision of which idle state to choose from,  given a predicted
idle time is taken by the menu governor based on
target_residency and  exit_latency of the idle states.
target_residency is the minimum time to be resident in that idle state.
Exit_latency is time taken to exit out of idle state.
Deeper the idle state, both the target residency and exit latency
would be higher.

In the current design, smt_snooze_delay is used as target_residency
for the  snooze state which is incorrect, as it is not the
minimum but the maximum duration to be in snooze state.
This would  result in the governor in taking bad decision,
as presently target_residency of nap < target_residency of snooze
inspite of nap being deeper idle state.

This patch aims to fix this problem by replacing the smt_snooze_delay loop
in snooze state, with the need_resched()  as the governor is aware of
entry and exit of various idle transitions based on which
next idle time prediction.

The governor is intelligent enough to determine the idle state the needs to
be transitioned to and maintains a whole of heuristics including
io load, previous idle states predictions etc for the same, based on
which idle state entry decision is taken.

With this fix, of setting target_residency of snooze to 0
					     nap to smt_snooze_delay
if the predicted idle time is less
than smt_snooze_delay (target_residency of nap)
value governor would pick snooze state, else nap. This adhers to the
previous native idle design.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

smt_snooze_delay was designed to  delay idle loop's nap entry
in the native idle code before it got  ported over to use as part of
the cpuidle framework.

A -ve value  assigned to smt_snooze_delay should result in
busy looping, in other words disabling the entry to nap state.

	- https://lists.ozlabs.org/pipermail/linuxppc-dev/2010-May/082450.html

This particular functionality can be achieved currently by
echo 1 > /sys/devices/system/cpu/cpu*/state1/disable
but it is broken when one assigns -ve value to  the smt_snooze_delay
variable either via sysfs entry or ppc64_cpu util.

This patch aims to fix this, by disabling nap state when smt_snooze_delay
variable is set to -ve value.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Remove the redundant target residency initialisation in pseries_cpuidle_driver_init().
This is currently over-writing the residency time updated as part of the static
table, resulting in  all the idle states having the same target
residency of 100us which is incorrect. This may result in the menu governor making
wrong state decisions.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Fix build failure for powerpc KVM by adding missing VPN_SHIFT definition
and the ';'

arch/powerpc/kvm/book3s_32_mmu_host.c: In function 'kvmppc_mmu_map_page':
arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: 'VPN_SHIFT' undeclared (first use in this function)
arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: (Each undeclared identifier is reported only once
arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: for each function it appears in.)
arch/powerpc/kvm/book3s_32_mmu_host.c:178: error: expected ';' before 'next_pteg'
arch/powerpc/kvm/book3s_32_mmu_host.c:190: error: label 'next_pteg' used but not defined
make[1]: *** [arch/powerpc/kvm/book3s_32_mmu_host.o] Error 1
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This reverts commit 81331211.

This revert was requested by the author of the patch as it seems
to cause system hangs with some low frequency events

The capability defines have moved causing the auto generated names
of capabilities that apparmor uses in logging to be incorrect.

Fix the autogenerated table source to uapi/linux/capability.h
Reported-by: YanHong <clouds.yan@gmail.com>
Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Analyzed-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The previous definition of for_each_*() would always include the very
first object within the list, irrespective of whether it was marked
deleted, since the deleted flag was not checked on the first object,
but only on any "next" object.

Fix for_each_*() to check the deleted flag in the loop body every
iteration to correct this.

(upstream dtc commit 1762ab42ef77db7ab2776d0d6cba3515150f518a)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

drivers/of/platform.c:110:59: warning: incorrect type in argument 2 (different base types)
drivers/of/platform.c:110:59:    expected restricted __be32 const [usertype] *addr
drivers/of/platform.c:110:59:    got unsigned int const [usertype] *[assigned] reg
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

drivers/of/irq.c:195:57: warning: restricted __be32 degrades to integer
drivers/of/irq.c:196:51: warning: restricted __be32 degrades to integer
drivers/of/irq.c:199:57: warning: restricted __be32 degrades to integer
drivers/of/irq.c:201:58: warning: restricted __be32 degrades to integer
drivers/of/irq.c:470:37: warning: incorrect type in assignment (different modifiers)
drivers/of/irq.c:470:37:    expected int ( *[usertype] irq_init_cb )( ... )
drivers/of/irq.c:470:37:    got void const *const data
drivers/of/irq.c:96:5: error: symbol 'of_irq_map_raw' redeclared with different type (originally declared at include/linux/of_irq.h:61) - incompatible argument 2 (different base types)

drivers/of/of_pci_irq.c:91:40: warning: incorrect type in argument 2 (different base types)
drivers/of/of_pci_irq.c:91:40:    expected unsigned int const [usertype] *intspec
drivers/of/of_pci_irq.c:91:40:    got restricted __be32 *<noident>
drivers/of/of_pci_irq.c:91:53: warning: incorrect type in argument 4 (different base types)
drivers/of/of_pci_irq.c:91:53:    expected unsigned int const [usertype] *addr
drivers/of/of_pci_irq.c:91:53:    got restricted __be32 *<noident>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

drivers/of/address.c:66:29: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:66:29:    expected restricted __be32 const [usertype] *cell
drivers/of/address.c:66:29:    got unsigned int [usertype] *addr
drivers/of/address.c:87:32: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:87:32:    expected restricted __be32 const [usertype] *cell
drivers/of/address.c:87:32:    got unsigned int [usertype] *addr
drivers/of/address.c:91:30: warning: incorrect type in assignment (different base types)
drivers/of/address.c:91:30:    expected unsigned int [unsigned] [usertype] <noident>
drivers/of/address.c:91:30:    got restricted __be32 [usertype] <noident>
drivers/of/address.c:92:22: warning: incorrect type in assignment (different base types)
drivers/of/address.c:92:22:    expected unsigned int [unsigned] [usertype] <noident>
drivers/of/address.c:92:22:    got restricted __be32 [usertype] <noident>
drivers/of/address.c:147:35: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:147:35:    expected restricted __be32 const [usertype] *addr
drivers/of/address.c:147:35:    got unsigned int [usertype] *addr
drivers/of/address.c:157:34: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:157:34:    expected restricted __be32 const [usertype] *cell
drivers/of/address.c:157:34:    got unsigned int [usertype] *
drivers/of/address.c:256:29: warning: restricted __be32 degrades to integer
drivers/of/address.c:256:36: warning: restricted __be32 degrades to integer
drivers/of/address.c:262:34: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:262:34:    expected restricted __be32 const [usertype] *cell
drivers/of/address.c:262:34:    got unsigned int [usertype] *
drivers/of/address.c:372:41: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:372:41:    expected restricted __be32 const [usertype] *cell
drivers/of/address.c:372:41:    got unsigned int [usertype] *addr
drivers/of/address.c:395:53: warning: incorrect type in argument 2 (different base types)
drivers/of/address.c:395:53:    expected restricted __be32 const [usertype] *addr
drivers/of/address.c:395:53:    got unsigned int [usertype] *addr
drivers/of/address.c:443:50: warning: incorrect type in argument 2 (different base types)
drivers/of/address.c:443:50:    expected restricted __be32 const [usertype] *addr
drivers/of/address.c:443:50:    got unsigned int *<noident>
drivers/of/address.c:455:49: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:455:49:    expected restricted __be32 const [usertype] *cell
drivers/of/address.c:455:49:    got unsigned int *<noident>
drivers/of/address.c:480:60: warning: incorrect type in argument 2 (different base types)
drivers/of/address.c:480:60:    expected restricted __be32 const [usertype] *addr
drivers/of/address.c:480:60:    got unsigned int *<noident>
drivers/of/address.c:412:5: warning: symbol '__of_translate_address' was not declared. Should it be static?
drivers/of/address.c:520:14: error: symbol 'of_get_address' redeclared with different type (originally declared at include/linux/of_address.h:22) - different base types
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Fixes build error on s3c6400_defconfig, introduced by commit
06455bbc, "dt/s3c64xx/spi: Use
of_get_child_by_name to get a named child".

drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata':
drivers/spi/spi-s3c64xx.c:838:2: error: implicit declaration of function
    'of_get_child_by_name' [-Werror=implicit-function-declaration]
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Pull misc UAPI fixes from David Howells:
 "They do a number of things:

  (1) Import a patch from Catalin Marinas to extend the generic-y in
      Kbuild facility to uapi directories.

  (2) Make arch/tile's ucontext.h file use (1) and remove the header-y
      line from the kernel internal side of things.

  (3) Remove some now-empty conditional bits from include/linux/Kbuild.
      The contents got moved to the UAPI side of things along with new
      conditionals.

  (4) Deal with now-empty files:

     (a) Empty Kbuild files under include/ get removed.

     (b) Empty Kbuild files under arch/ get comments to hold them as
         they are likely to end up with generic-y or genhdr-y lines.
         Deleting them appears to work if we want to go that route.

     (c) Put a comment into uapi/asm-generic/kvm_para.h to prevent the
         patch program from deleting that, and made the arches with
         empty kvm_para.h uapi files use that instead of having their
         own files.

     (d) Put comments into four other empty uapi/ headers to prevent the
         patch program from deleting them.

  A question: Is this the right way to deal with the now-empty Kbuild
  files?

  The ones under include/ are unlikely to be used - even for generated
  files, I think - so getting rid of them is probably okay.  Once all
  the bits are in, we can probably remove all the Kbuild files under
  include/ that aren't also under include/uapi/.

  The ones under arch/ are more of an issue because of the potential for
  generic-y and genhdr-y."

* tag 'uapi-fixes-20121017' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: Make arch/sparc/include/uapi/asm/sigcontext.h non-empty
  UAPI: Make arch/sh/include/uapi/asm/hw_breakpoint.h non-empty
  UAPI: Make arch/mn10300/include/uapi/asm/setup.h non-empty
  UAPI: Put a comment into uapi/asm-generic/kvm_para.h and use it from arches
  UAPI: The tile arch uses the generic ucontext.h file
  UAPI: Place comments in empty arch Kbuilds to make them non-empty
  UAPI: Remove empty non-UAPI Kbuild files
  UAPI: Remove empty conditionals from include/linux/Kbuild
  UAPI: Make uapi/linux/irqnr.h non-empty
  uapi: Allow automatic generation of uapi/asm/ header files

This option is a merge of both analog TV and DVB CUSTOMISE.

At the merge, the dependencies were not done right: the menu
currently appears only for analog TV. It should also be opened
for digital TV. As there are other I2C devices there (flash
devices, etc) that aren't related to either one, it is better
to make it generic enough to open for all media devices with
video.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Pull networking fixes from David Miller:

 1) Fix regression in /proc/net/if_inet6, sometimes devices do not get
    listed.  From Eric Dumazet.

 2) Add IPSEC networking sub-section to MAINTAINERS.

 3) S390 networking fixes from Hendrik Brueckner and Stefan Raspl.

 4) Fix enslavement of devices that can't do VLAN properly, from Jiri
    Pirko.

 5) SCTP sack handling fix from Zijie Pan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv6: addrconf: fix /proc/net/if_inet6
  bnx2x: fix handling mf storage modes
  qeth: fix deadlock between recovery and bonding driver
  smsgiucv: reestablish IUCV path after resume
  sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()
  vlan: fix bond/team enslave of vlan challenged slave/port
  MAINTAINERS: Add explicit section for IPSEC networking.

Pull sparc fixes from David Miller:
 "Two sparc64 perf bug fixes and add a sysrq facility so I can diagnose
  these kinds of problems more quickly in the future."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix bit twiddling in sparc_pmu_enable_event().
  sparc64: Add global PMU register dumping via sysrq.
  sparc64: Like x86 we should check current->mm during perf backtrace generation.

Add chip details for E-mu 1010 PCIe card. It has the same
chip as found in E-mu 1010b but it uses different PCI id.
Signed-off-by: Maxim Kachur <mcdebugger@duganet.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

As suggested by Geert Uytterhoeven <geert@linux-m68k.org>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Lars-Peter Clausen <lars@metafoo.de>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Lars-Peter Clausen <lars@metafoo.de>
Patchwork: https://patchwork.linux-mips.org/patch/4424/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The uapi changeset forgot to fix the header locations, needed
for the DocBook specs. Fix it.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Linux 3.7-rc1

* tag 'v3.7-rc1': (9579 commits)
  Linux 3.7-rc1
  x86, boot: Explicitly include autoconf.h for hostprogs
  perf: Fix UAPI fallout
  ARM: config: make sure that platforms are ordered by option string
  ARM: config: sort select statements alphanumerically
  UAPI: (Scripted) Disintegrate include/linux/byteorder
  UAPI: (Scripted) Disintegrate include/linux
  UAPI: Unexport linux/blk_types.h
  UAPI: Unexport part of linux/ppp-comp.h
  perf: Handle new rbtree implementation
  procfs: don't need a PATH_MAX allocation to hold a string representation of an int
  vfs: embed struct filename inside of names_cache allocation if possible
  audit: make audit_inode take struct filename
  vfs: make path_openat take a struct filename pointer
  vfs: turn do_path_lookup into wrapper around struct filename variant
  audit: allow audit code to satisfy getname requests from its names_list
  vfs: define struct filename and have getname() return it
  btrfs: Fix compilation with user namespace support enabled
  userns: Fix posix_acl_file_xattr_userns gid conversion
  userns: Properly print bluetooth socket uids
  ...

ASoC: Fixes for v3.7

Nothing too exciting except for the ams-delta change which is relatively
lerge due to the fact that the driver loading had been totally broken as
the driver needed a newer API to function.

arch/sparc/include/uapi/asm/sigcontext.h was emitted by the UAPI disintegration
script as an empty file because the parent file had no UAPI stuff in it,
despite being marked with "header-y".

Unfortunately, the patch program deletes resultant empty files when applying a
kernel patch.

So just stick a comment in there as a placeholder.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David S. Miller <davem@davemloft.net>
cc: sparclinux@vger.kernel.org

arch/sh/include/uapi/asm/hw_breakpoint.h was emitted by the UAPI disintegration
script as an empty file because the parent file had no UAPI stuff in it,
despite being marked with "header-y".

Unfortunately, the patch program deletes resultant empty files when applying a
kernel patch.

So just stick a comment in there as a placeholder.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paul Mundt <lethal@linux-sh.org>
cc: linux-sh@vger.kernel.org

arch/mn10300/include/uapi/asm/setup.h was emitted by the UAPI disintegration
script as an empty file because the parent file had no UAPI stuff in it,
despite being marked with "header-y".

Unfortunately, the patch program deletes resultant empty files when applying a
kernel patch.

So just stick a comment in there as a placeholder.
Signed-off-by: David Howells <dhowells@redhat.com>