- 14 Oct, 2013 8 commits
-
-
Mauro Carvalho Chehab authored
At this bugzilla and similar ones: https://bugzilla.kernel.org/show_bug.cgi?id=60645 Those debug messages were seen as errors, but they're just debug data, and are OK to appear on sms1100 and sms2270. Re-tag them to appear only if debug is enabled. Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by:
André Roth <neolynx@gmail.com> Signed-off-by:
-
Luis Alves authored
This patch will fix the situation where the mutex was left in a locked state if for some reason the FE init failed. Signed-off-by:
Luis Alves <ljalvs@gmail.com> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Krzysztof Hałasa authored
On certain platforms a sequence of dma_map_sg() and dma_unmap_sg() discards data previously stored in the buffers. Build video headers only after the DMA is completed. Signed-off-by:
Krzysztof Ha?asa <khalasa@piap.pl> [hans.verkuil@cisco.com: fix merge problems due to the recent solo sg_table changes] Signed-off-by:
-
Krzysztof Hałasa authored
Signed-off-by:
-
Krzysztof Hałasa authored
Signed-off-by:
-
Krzysztof Hałasa authored
[m.chehab@samsung.com: Fix CodingStyle: don't use 2 statements on just one line] Signed-off-by:
-
Dan Carpenter authored
The "|" operation has higher precedence that "?:" so this couldn't return both flags set at once as intended. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 03 Oct, 2013 12 commits
-
-
Wei Yongjun authored
Fix to return -ENOMEM in the new i2c client and create workqueue error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the IRQF_DISABLED flag from davinci media platform drivers. It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: warning: (... && VIDEO_RENESAS_VSP1 && ...) selects VIDEOBUF2_DMA_CONTIG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA) drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’: drivers/media/v4l2-core/videobuf2-dma-contig.c:202: error: implicit declaration of function ‘dma_mmap_coherent’ drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’: drivers/media/v4l2-core/videobuf2-dma-contig.c:385: error: implicit declaration of function ‘dma_get_sgtable’ make[7]: *** [drivers/media/v4l2-core/videobuf2-dma-contig.o] Error 1 VIDEO_RENESAS_VSP1 (which doesn't have a platform dependency) selects VIDEOBUF2_DMA_CONTIG, but the latter depends on HAS_DMA. Make VIDEO_RENESAS_VSP1 depend on HAS_DMA to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
We must not assume that the PCI device is already enabled. Signed-off-by:
-
Ben Hutchings authored
We must call iounmap() and pci_dev_put() when removed and on the probe failure path. Signed-off-by:
-
Ben Hutchings authored
Use phys_addr_t and log format %pa. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return -ENODEV in the subdevice register error handling. Signed-off-by:
-
Luis Alves authored
...and remove the frontend pointer param from cx24117_attach() Signed-off-by:
-
Luis Alves authored
Signed-off-by:
-
Luis Alves authored
Add support for the cx24117 dual DVB-S/S2 frontend. Signed-off-by:
-
Alexey Khoroshilov authored
There is an asymmetry in ttusb_dec_init_usb()-ttusb_init_rc() and ttusb_dec_exit_usb()-ttusb_dec_exit_rc() in terms of resources allocated-deallocated. irq_urb and irq_buffer are allocated in ttusb_dec_init_usb(), while they are deallocated in ttusb_dec_exit_rc(). As a result there is a leak of them in ttusb_dec_probe(). The patch fixes the asymmetry and a leak on a failure path in ttusb_dec_init_usb(). By the way, it - removes usage of -1 as a custom error code, - replaces GFP_ATOMIC by GFP_KERNEL in usb_alloc_coherent() in ttusb_dec_init_usb() as soon as all other memory allocation done with GFP_KERNEL; - refactors ttusb_dec_boot_dsp() in an equivalent way except for returning 0 instead of 1 if ttusb_dec_boot_dsp() succeed in (!mode) branch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
- 02 Oct, 2013 9 commits
-
-
Mauro Carvalho Chehab authored
Changeset 9e8da9e8 added a parameter to specify the frequency divisor, used by the driver. However, not all places are passing this parameter. So, preserve the previous default, to avoid breaking the existing drivers. Signed-off-by: -
John Horan authored
[media] media: dvb-frontends: ts2020: Added in a option for frequency divider value for s600 devices When the tuner part of the ds3000 driver was split to share code with the m88rs2000 driver, the ts2020 driver used the frequency divider value from the m88rs2000 driver. However the ds3000 driver requires a different value, and this resulted in some frequecies being invisible to the tuner. This patch adds back in the value needed for the ds3000 driver and configured as an option in the dw2102 frontend driver. It may also apply to su3000 devices, which use the same ds3000 driver, but for now it is only applied to the s660 device. Signed-off-by:
John Horan <knasher@gmail.com> Signed-off-by:
-
Michael Krufky authored
Thanks-to: Joe Perches <joe@perches.com> Signed-off-by:
-
Kees Cook authored
Make sure that a format string cannot accidentally leak into the printk buffer. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Christoph Jaeger authored
SIZEOF_ARRAY is not used (anymore). Besides, ARRAY_SIZE, defined in include/linux/kernel.h, should be used rather than explicitly coding some variant of it. Signed-off-by:
Christoph Jaeger <christophjaeger@linux.com> Reviewed-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Andreas Matthies authored
Reading firmware status register to detect whether firmware is running or not didn't work 100% reliably. That register was likely set by firmware itself which means it could not contain reasonable values until firmware is up and running. Usually it just worked as some garbage value was returned accidentally but it appears that in some cases returned garbage value was 0x00 which was considered "firmware is up and running" by the driver and firmware loading was skipped leaving device to non-working state. Fix problem by removing unreliable check and let the driver keep count whether firmware is loaded or not. Signed-off-by:
Andreas Matthies <a.matthies@gmx.net> Signed-off-by:
-
Peter Senna Tschudin authored
The variable vco_select is only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Acked-by:
Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by:
-
Ming Lei authored
Complete() will be run with interrupt enabled, so change to spin_lock_irqsave(). These functions may be called inside URB->complete(), so use spin_lock_irqsave(). Signed-off-by:
Ming Lei <ming.lei@canonical.com> Acked-by:
-
Mauro Carvalho Chehab authored
drivers/media/usb/gspca/stk1135.c:615:6: warning: no previous prototype for 'stk1135_try_fmt' [-Wmissing-prototypes] void stk1135_try_fmt(struct gspca_dev *gspca_dev, struct v4l2_format *fmt) ^ drivers/media/usb/gspca/stk1135.c:627:5: warning: no previous prototype for 'stk1135_enum_framesizes' [-Wmissing-prototypes] int stk1135_enum_framesizes(struct gspca_dev *gspca_dev, Signed-off-by:
-
- 26 Sep, 2013 10 commits
-
-
Sylwester Nawrocki authored
Add debug print so it's easier to find any errors resulting from the planes' configuration checks added in commit 8023ed09 "videobuf2-core: Verify planes lengths for output buffers". Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Seung-Woo Kim authored
__qbuf_userptr checks whether provided buffer is large enough, and it returns error without any log. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Heejin Woo <heejin.woo@samsung.com> Signed-off-by:
-
Ricardo Ribalda authored
Replace the private struct vb2_dma_sg_desc with the struct sg_table so we can benefit from all the helping functions in lib/scatterlist.c for things like allocating the sg or compacting the descriptor. marvel-ccic and solo6x10 drivers, that use this API have been updated. Acked-by:
Andre Heider <a.heider@gmail.com> Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> [s.nawrocki@samsung.com: minor corrections of the changelog] Signed-off-by:
-
Ricardo Ribalda authored
Most DMA engines have limitations regarding the number of DMA segments (sg-buffers) that they can handle. Videobuffers can easily spread through hundreds of pages. In the previous aproach, the pages were allocated individually, this could led to the creation houndreds of dma segments (sg-buffers) that could not be handled by some DMA engines. This patch tries to minimize the number of DMA segments by using alloc_pages. In the worst case it will behave as before, but most of the times it will reduce the number of dma segments Acked-by:
-
Ricardo Ribalda authored
struct v4_file_operations defines the data param as const char __user *data but on vb2 is defined as char __user *data. This patch fixes the warnings produced by this. ie: drivers/qtec/qtec_xform.c:817:2: warning: initialization from incompatible pointer type [enabled by default] drivers/qtec/qtec_xform.c:817:2: warning: (near initialization for ‘qtec_xform_v4l_fops.write’) [enabled by default] Signed-off-by:
-
Andy Shevchenko authored
Instead of passing each byte through stack let's use %*ph specifier to do this job better. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Ondrej Zary authored
Add variable resolution support to Syntek STK1135 subdriver. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Add variable resolution support to gspca by allowing subdrivers to specify try_fmt and enum_framesizes functions. Signed-off-by:
-
Ondrej Zary authored
Store complete current mode (struct v4l2_pix_format) in struct gspca_dev instead of separate pixfmt, width and height parameters. This is a preparation for variable resolution support. Signed-off-by:
-
Gregor Jasny authored
The owner knows the system as "LX INFINITI Powerlite". DMI information for this system: System Information Manufacturer: HCL Infosystems Limited Product Name: T12Rg-H Version: 1.0 Serial Number: B073A1189988 UUID: 326B3F00-001D-602F-CFD2-4E45435F4349 Wake-up Type: Power Switch SKU Number: Family: Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: HCL Infosystems Limited Product Name: T12Rg-H Version: 1.0 Serial Number: BSN12345678901234567 Asset Tag: ATN12345678901234567 Features: Board is a hosting board Board is replaceable Location In Chassis: Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Bus 001 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 Webcam Signed-off-by:Gregor Jasny <gjasny@googlemail.com> Reported-by:
Noopur Srivastava <noopur.018@gmail.com> Signed-off-by:
-
- 24 Sep, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 3.12-rc2 * tag 'v3.12-rc2': (10774 commits) Linux 3.12-rc2 cfq: explicitly use 64bit divide operation for 64bit arguments block: Add nr_bios to block_rq_remap tracepoint Btrfs: create the uuid tree on remount rw btrfs: change extent-same to copy entire argument struct Btrfs: dir_inode_operations should use btrfs_update_time also btrfs: Add btrfs: prefix to kernel log output btrfs: refuse to remount read-write after abort Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0 Btrfs: don't leak transaction in btrfs_sync_file() Btrfs: add the missing mutex unlock in write_all_supers() Btrfs: iput inode on allocation failure Btrfs: remove space_info->reservation_progress Btrfs: kill delay_iput arg to the wait_ordered functions Btrfs: fix worst case calculator for space usage Revert "Btrfs: rework the overcommit logic to be based on the total size" Btrfs: improve replacing nocow extents Btrfs: drop dir i_size when adding new names on replay Btrfs: replay dir_index items before other items Btrfs: check roots last log commit when checking if an inode has been logged ...
-
