- 21 Dec, 2010 2 commits
-
-
Henrik Rydberg authored
The Synaptics 2.7 series of touchpads support a mode for reporting two sets of X/Y/Pressure data (advanced gesture mode). By default, these devices report only single finger data, depriving userspace of the nowadays ubiquitous two-finger scroll gesture. Enabling advanced gesture mode also enables the multi-finger report, although the device does not claim that capability. Up to three fingers can be reported this way. While two or three fingers are touching, the normal packet is prepended by a reduced finger packet of lower resolution. From the two packets (which do not represent the actual fingers), the bounding rectangle of the individual contacts can be extracted. This information is sufficient to perform scaling gestures and a limited form of rotation gesture. The behavior has been coined semi-mt capability, and is signaled to userspace via the INPUT_PROP_SEMI_MT device property. Work to decode the advanced gesture packet: Takashi Iwai. Cleanup and testing of the original patch: Chase Douglas. Minor cleanup and testing: Chris Bagwell. Finalization and semi-mt support: Henrik Rydberg. Reported-by: Tobyn Bertram Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
With the new input property interface, it is possible to report the special quirks of a device using ioctl/sysfs. This patch sets up the device as a pointer, and reports the clickpad functionality via the INPUT_PROP_BUTTONPAD property. Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
- 20 Dec, 2010 3 commits
-
-
Henrik Rydberg authored
This patch documents the recent input-mt interface changes. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
Looking at the uevent stream for input devices, all properties are on the form "A=B" except the bitmap values, which are on the form "A==B". This bug has been around at least since 2007, and the input uevent code has been untouched since. The recent addition of device properties suggests this is a good time for a remedy. Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
Today, userspace sets up an input device based on the data it emits. This is not always enough; a tablet and a touchscreen may emit exactly the same data, for instance, but the former should be set up with a pointer whereas the latter does not need to. Recently, a new type of touchpad has emerged where the buttons are under the pad, which changes logic without changing the emitted data. This patch introduces a new ioctl, EVIOCGPROP, which enables user access to a set of device properties useful during setup. The properties are given as a bitmap in the same fashion as the event types, and are also made available via sysfs, uevent and /proc/bus/input/devices. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
- 18 Dec, 2010 1 commit
-
-
Andy Ross authored
This patch adds support for another Wetab device (726b), and grabs it accordingly in hid-core. [rydberg@euromail.se: rename and log message changes] Signed-off-by: Andy Ross <andy@plausible.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
- 16 Dec, 2010 14 commits
-
-
Dmitry Torokhov authored
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The input multitouch core is now located in its own file, and maintained via a git tree. Update the maintainers entry accordingly. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Richard Nauber authored
The Samsung NB30 touch has a DWAV dual-touch device. This patch adds the NB30 to the list of supported devices, and grabs it accordingly in hid-core. [rydberg@euromail.se: rename and log message changes] Signed-off-by: Richard Nauber <Richard.Nauber@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
Add the new supported devices to the kernel menu config help text. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Stephane Chatty <chatty@enac.fr> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The Wetab tablet dual-touch controller works the same way as the one in the Joojoo tablet. This patch adds the Wetab to the list of supported devices, and grabs it accordingly in hid-core. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Stephane Chatty <chatty@enac.fr> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The firmware in the joojoo reports touches sequentially, one per report, which confuses the current driver. A further complication is the absense of any indication of a touch frame. This patch converts the driver to the MT slots protocol, and outputs one full touch frame per report. This way, proper handling for both firmwares is ensured. Tested-by: Philipp Merkel <mail@philmerk.de> Cc: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
Use estimated signal-to-noise ratios to reduce noise and limit the amount of events emitted. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Stephane Chatty <chatty@enac.fr> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The firmware reports a logical minimum of one, but in order for userspace applications to correctly map all reported values to non-zero pressure, the driver needs to report a logical minimum of zero. Fixed with this patch. Tested-by: Philipp Merkel <mail@philmerk.de> Cc: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The firmware of both supported devices report a X/Y maximum of 4095, whereas in reality, it is eight times larger. Fixed with this patch. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Stephane Chatty <chatty@enac.fr> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The hid core does not yet handle input filtering. Take over the setup of the input device, so that proper signal-to-noise ratios can be used. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Stephane Chatty <chatty@enac.fr> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
Touch devices capable of hovering, i.e., fingers detected a distance from the surface, are not supported by the current input MT protocol. This patch adds ABS_MT_DISTANCE, which may be used to indicate the distance between the contact and the surface. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The drivers using the type B protocol all report tracking information the same way. The contact id is semantically equivalent to ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates the driver. The situation can be improved upon by providing a common pointer emulation code, thereby removing the need for the tracking id in the driver. This patch moves all tracking event handling over to the input core, simplifying both the existing drivers and the ones currently in preparation. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
The MT slots devices all follow the same initialization pattern of creating slots and hinting about buffer size. Let drivers call an initialization function instead, and make sure it can be called repeatedly without side effects. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
Henrik Rydberg authored
In preparation for common code to handle a larger set of MT slots devices, move the slots handling over to a separate file. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
-
- 01 Nov, 2010 10 commits
-
-
Linus Torvalds authored
-
git://www.jni.nu/crisLinus Torvalds authored
* 'for-linus' of git://www.jni.nu/cris: CRIS: Add paths for CRISv10 serial driver CRIS: Fix RS485 delay handling. Add missing "struct" to in sizeof.
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: fix erroneous platform data in U300 spi: fixed odd static string conventions in core code spi/bfin_spi: only request GPIO on first load spi/bfin_spi: handle error/status changes after data interrupts spi: enable spi_board_info to be registered after spi_master
-
Jesper Nilsson authored
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
-
Linus Walleij authored
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set. Cc: Kevin Wells <wellsk40@gmail.com>OA Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Dmitry Torokhov authored
We were forgetting to set up proper return value in success path causing ir_getkeycode() to fail intermittently: drivers/media/IR/ir-keytable.c: In function 'ir_getkeycode': drivers/media/IR/ir-keytable.c:363: warning: 'retval' may be used uninitialized in this function Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllers i2c-i801: Handle multiple instances instead of keeping global state i2c-i801: Add Intel Patsburg device ID i2c: Drop unused I2C_CLASS_TV flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - remove extra KERN_DEBUG use from dprintk Input: bu21013_ts - fix null dereference in error handling Input: ad7879 - prevent invalid finger data reports
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (70 commits) [SCSI] pmcraid: add support for set timestamp command and other fixes [SCSI] pmcraid: remove duplicate struct member [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait [SCSI] megaraid_sas: Version and documentation update [SCSI] megaraid_sas: Add three times Online controller reset [SCSI] megaraid_sas: Add input parameter for max_sectors [SCSI] megaraid_sas: support devices update flag [SCSI] libosd: write/read_sg_kern API [SCSI] libosd: Support for scatter gather write/read commands [SCSI] libosd: Free resources in reverse order of allocation [SCSI] libosd: Fix bug in attr_page handling [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18 [SCSI] lpfc 8.3.18: Add new WQE support [SCSI] lpfc 8.3.18: Fix critical errors [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout [SCSI] lpfc 8.3.18: Add support of received ELS commands [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes [SCSI] ipr: add definitions for a new adapter [SCSI] bfa: fix comments for c files ...
-
Linus Torvalds authored
Merge branches 'irq-core-for-linus' and 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix up irq_node() for irq_data changes. genirq: Add single IRQ reservation helper genirq: Warn if enable_irq is called before irq is set up * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Remove mutex emulation staging: Final semaphore cleanup jbd2: Convert jbd2_slab_create_sem to mutex hpfs: Convert sbi->hpfs_creation_de to mutex Fix up trivial change/delete conflicts with deleted 'dream' drivers (drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})
-
- 31 Oct, 2010 10 commits
-
-
David Woodhouse authored
These are the extra 'Integrated Device Function' SMBus controllers found on the Patsburg chipset. Mention the absence of slave mode support. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Woodhouse authored
It's poor form to keep driver state in global variables rather than per-instance. It never really mattered in practice when there was only one controller on the chipset, but the latest chipsets do have more than one controller, so now we care. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Seth Heasley authored
Add support for the Intel Patsburg PCH SMBus Controller. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
There are no users left for I2C_CLASS_TV_ANALOG and I2C_CLASS_TV_DIGITAL, so we can get rid of them. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Christoph Hellwig authored
This one was only used for a nasty hack in nfsd, which has recently been removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
The caller allocated it, the caller should free it. The only issue so far is that we could change the flp pointer even on an error return if the fl_change callback failed. But we can simply move the flp assignment after the fl_change invocation, as the callers don't care about the flp return value if the setlease call failed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Commit ffe8018c ("initramfs: fix initramfs size calculation") broke 32-bit big-endian arches like (on ARAnyM): VFS: Cannot open root device "hda1" or unknown-block(3,1) Please append a correct "root=" boot option; here are the available partitions: fe80 1059408 nfhd8 (driver?) fe81 921600 nfhd8p1 00000000-0000-0000-0000-000000000nfhd8p1 fe82 137807 nfhd8p2 00000000-0000-0000-0000-000000000nfhd8p2 0200 3280 fd0 (driver?) 0201 3280 fd1 (driver?) 0300 1059408 hda driver: ide-gd 0301 921600 hda1 00000000-0000-0000-0000-000000000hda1 0302 137807 hda2 00000000-0000-0000-0000-000000000hda2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1) As pointed out by Kerstin Jonsson <kerstin.jonsson@ericsson.com>, this is due to CONFIG_32BIT not being defined, so the initramfs size field is done as a 64-bit quad. On little-endian (like x86) this doesn matter, but on a big-endian machine the 32-bit reads will see the (zero) high bits. Only mips, s390, and score set CONFIG_32BIT for 32-bit builds, so fix it for all other 32-bit arches by inverting the logic and testing for CONFIG_64BIT, which should be defined on all 64-bit arches. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [ I think we should just make it "u64" on all architectures and get rid of the whole #ifdef CONFIG_xxBIT - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: isdn: mISDN: socket: fix information leak to userland netdev: can: Change mail address of Hans J. Koch pcnet_cs: add new_id net: Truncate recvfrom and sendto length to INT_MAX. RDS: Let rds_message_alloc_sgs() return NULL RDS: Copy rds_iovecs into kernel memory instead of rereading from userspace RDS: Clean up error handling in rds_cmsg_rdma_args RDS: Return -EINVAL if rds_rdma_pages returns an error net: fix rds_iovec page count overflow can: pch_can: fix section mismatch warning by using a whitelisted name can: pch_can: fix sparse warning netxen_nic: Fix the tx queue manipulation bug in netxen_nic_probe ip_gre: fix fallback tunnel setup vmxnet: trivial annotation of protocol constant vmxnet3: remove unnecessary byteswapping in BAR writing macros ipv6/udp: report SndbufErrors and RcvbufErrors phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr
-
J. Bruce Fields authored
The NFSv4 server was initializing the dp->dl_flock pointer by the somewhat ridiculous method of a locks_copy_lock callback. Now that setlease uses the passed-in lock instead of doing a copy, dl_flock no longer gets set, resulting in the lock leaking on delegation release, and later possible hangs (among other problems). So, initialize dl_flock and get rid of the callback. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-