- 18 Apr, 2017 24 commits
-
-
Colin Ian King authored
The comparison of mode >= 0 is redundant as mode is a u32 and this is always true. Remove this redundant code. Detected with CoverityScan ("Unsigned compared against 0") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Wern authored
Gstreamer's v4l2src reacted poorly to certain outputs from the bcm2835 video driver's ioctl ops function vidioc_enum_framesizes, so a workaround was created that could be activated by user input. This workaround would replace the driver's ioctl ops struct with another, similar struct--only with no function pointed to by vidioc_enum_framesizes. With no response, gstreamer would attempt to continue with some default settings that happened to work better. However, this bug has been fixed in gstreamer since 2014, so we shouldn't include this workaround in the stable version of the driver. Signed-off-by:
Kevin Wern <kevin.m.wern@gmail.com> Signed-off-by:
-
Tobin C. Harding authored
Checkpatch emits WARNING: quoted string split across lines. Concatenate string onto single line. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
Tobin C. Harding authored
Driver SDIO code uses helper functions to do IO to the SDIO device. Current helpers handle IO of a single byte as well as multi-byte. Driver predominately uses single byte IO. If the common case is made simple it simplifies the whole driver. The common case can be made simple by splitting the multi-byte and single byte calls into separate functions, i.e 4 functions in total, read single byte, read multi-byte, write single byte, write multi-byte. Also, we need to handle the debug code. Currently debug calls after read/write fail access the IO buffer. This buffer, at best, does not hold useful data on the error path, at worst is uninitialized and holds garbage. Split read/write helper functions into two functions each, one for single byte IO and one for multi-byte IO. Fix all call sites. Do not change the program logic. Signed-off-by:
-
Tobin C. Harding authored
Checkpatch emits CHECK: Please don't use multiple blank lines. Remove multiple blank lines. Signed-off-by:
-
Tobin C. Harding authored
Checkpatch emits WARNING: please, no space before tabs. Remove space before tabs. Signed-off-by:
-
Tobin C. Harding authored
goto label includes 'err_' suffix but is executed on non-error paths. Remove err_ suffix from goto label. Signed-off-by:
-
Tobin C. Harding authored
SDIO code currently has a number of unneeded comments. Following kernel coding style we do not need extraneous comments, especially on code where it is clear what is being done. Spelling typos can be fixed. Remove unnecessary comments, fix typos in comments. Signed-off-by:
-
Tobin C. Harding authored
ks_sdio_card structure description does not have a kernel doc format comment. Add kernel doc format comment to struct ks_sdio_card. Signed-off-by:
-
Tobin C. Harding authored
Currently driver uses a hardware information struct description to group some SDIO related functionality (work, work queue, sdio private data pointer). This structure is then embedded in the device private data structure. Having nested structures described in different header files means that to view the device private data programmers must open two header files. This structure could be embedded anonymously in the device private data and achieve the same result (grouping of function specific to SDIO) without the need to open multiple headers. However, the SDIO private data structure already has various different data and pointers, adding the embedded structure adds little extra meaning and lengthens all the dereferences throughout the driver, often meaning addition line breaks and braces. We can increase readability and reduce code complexity by moving the hardware information data and pointers to directly be within the device private data structure description. While preparing for this refactoring it was noted that the identifier currently used for the delayed work is 'rw_wq', this is confusing since the 'wq' suffix typically means 'work queue'. This identifier would be more meaningful if it used the suffix 'dwork' as does the declaration of queue_delayed_work() (include/linux/workqueue.h). The identifier for the work queue is currently 'ks7010sdio_wq'. This identifier can be shortened without loss of meaning because there is only one work queue within the driver. Identifier 'wq' is typical within in-tree driver code and aptly describes the pointer. Current pointer to the SDIO private data is identified by 'sdio_card', this is sufficiently meaningful from within the hw_info structure but once the hw_info_t structure is removed the pointer would be better to have a prefix appended to it to retain the prior level of meaning. Move members from struct hw_info_t to struct ks_wlan_private. Rename identifiers; struct delayed_work pointer 'rw_wq' to 'rw_dwork'. struct workqueue_struct pointer 'ks7010sdio_wq' to 'wq'. struct ks_sdio_card pointer 'sdio_card' to 'ks_sdio_card'. Remove structure description hw_info_t. Fix init/destroy calls. Fix all call sites, SDIO private data access calls, and queuing calls. Signed-off-by:
-
Tobin C. Harding authored
Currently a pointer to the tasklet_struct used for bottom half processing on the receive path is within the hw_info_t structure. This structure is then embedded in the device private data structure. Having the tasklet_struct nested does not add meaning to the device private data, device private data already (and typically) has various data relating to the device, there is no real need to separate the tasklet_struct to a SDIO specific structure. While not adding allot of extra meaning having the nested structure means the programmer must open two header files to read the description of the device private data, the code would be easier to read if the device private data struct description was not spread over two files. Move tasklet_struct out of sdio header file and into the device private data structure description. Signed-off-by:
-
Tobin C. Harding authored
struct work_struct uses identifier ks_wlan_wakeup_task, this is confusing because the 'task' suffix implies that this is a tasklet_struct instead of a work struct. Suffix 'work' would be more clear. The code would be easier to read if it followed the principle of least surprise and used the 'work' suffix for a work_struct identifier. Rename work_struct structure 'ks_wlan_wakeup_task' to 'wakeup_work'. Signed-off-by:
-
Tobin C. Harding authored
SDIO header file does not use kernel doc format struct comments. Adding them aids readability and enables documentation to be built from the source code. Other comments may be tidied up as we do this. Add kernel format struct comments. Tidy up comments. Signed-off-by:
-
Tobin C. Harding authored
complete_handler() takes void * types as parameters. void * parameters are then cast to struct types. Call sites for this function either pass in NULL or pointers to the struct types cast to void *. This casting is unnecessary and can be removed. Struct tx_device_buffer (which contains a pointer member to the complete_handler() function) has as member 'ks_wlan_priv *priv' this is unnecessary, we always have a pointer to this struct there is no need to store it here. The complete_handler can be more clearly defined by using struct pointer types instead of void * types. The code is currently unnecessarily complex, storing and passing extraneous pointer parameters. Remove unnecessary parameters, unnecessary casting to/from 'void *'. Fix all call sites involving complete_handler(). Signed-off-by:
-
Tobin C. Harding authored
Header has multiple constants defined using preprocessor directive. In the cases where these are an integer progression an enumeration type can be used. Doing so adds documentation to the code and makes the usage explicit. Maintain original constant value, this value is returned by the device. Replace (integer progression) preprocessor constants with enumeration type. Signed-off-by:
-
Tobin C. Harding authored
SDIO header currently defines unused constants READ_STATUS_BUSY and WRITE_STATUS_IDLE. There are reciprocal constants that are used READ_STATUS_IDLE and WRITE_STATUS_BUSY. We can roll these into a single enumeration type and remove the two that are unused. Add enumeration type containing IDLE/BUSY pair that are currently used within the SDIO source. Change source to use new enum types. Signed-off-by:
-
Darryl T. Agostinelli authored
$ make includecheck | grep staging ./drivers/staging/greybus/uart.c: linux/serial.h is included more than once. Signed-off-by:
Darryl T. Agostinelli <dagostinelli@gmail.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Darryl T. Agostinelli authored
Fixes: $ make versioncheck | grep staging ./drivers/staging/greybus/light.c: 15 linux/version.h not needed. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
-
Skanda Guruanand authored
The struct lu_dirpage elements in lustre_idl.h file are modified to __le64 and __le32 types since the elements are always converted from litte endian to processor native format in mdc_request.c file. Following warnings are removed by this fix. drivers/staging/lustre/lustre/mdc/mdc_request.c:958:42: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:959:42: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:962:42: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:963:42: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:985:50: warning: cast to restricted __le32 drivers/staging/lustre/lustre/mdc/mdc_request.c:1193:24: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:1328:25: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:1329:23: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:1332:25: warning: cast to restricted __le64 drivers/staging/lustre/lustre/mdc/mdc_request.c:1333:23: warning: cast to restricted __le64 Signed-off-by:
Skanda Guruanand <skanda.kashyap@gmail.com> Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Signed-off-by:
-
Craig Inches authored
This resolves a checkpatch warning that "Single statement macros should not use a do {} while (0) loop" by removing the loop and adjusting line length accordingly. Signed-off-by:Craig Inches <Craig@craiginches.com> Reviewed-by:
-
Alexandre Bailon authored
The cport_quiesce() method is mandatory in the case of the es2 Greybus hd controller to shutdown the cports on the es2 controller. In order to add support of another controller which may not need to shutdown its cports, make the cport_quiesce() optional, and check if the controller implement it before to use it. Signed-off-by:
Alexandre Bailon <abailon@baylibre.com> Signed-off-by:
-
Paul Gortmaker authored
The Makefile / Kconfig currently controlling compilation of this code is: clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o atomisp/Kconfig:menuconfig INTEL_ATOMISP atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was already not in use by this driver, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-media@vger.kernel.org Cc: devel@driverdev.osuosl.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This removes a strange 'list' file in drivers/staging/media/atomisp/pci/atomisp2/ that was not being used for anything. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Greg Kroah-Hartman authored
Previous patches deleted files, but the Makefile still referenced their .o files. Fix this up by removing them in the Makefile. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
-
- 14 Apr, 2017 16 commits
-
-
Tobin C. Harding authored
Driver SDIO private data structure description includes a spin_lock that is never used. This data structure only contains a pointer to the sdio_func and a pointer to the main device private data. A spin_lock is not required here. Remove unused spin_lock. Signed-off-by:
-
Tobin C. Harding authored
Driver SDIO header describes a structure that is never used. It can be safely removed. Remove unused structure description. Signed-off-by:
-
Tobin C. Harding authored
Driver SDIO code allocates memory for a buffer that is never used. It can be safely removed. Remove unused buffer, including allocation and freeing of memory. Signed-off-by:
-
Tobin C. Harding authored
Driver SDIO code initializes a completion that is never used. It can be safely removed. Remove unused completion. Signed-off-by:
-
Colin Ian King authored
char array cmd is being scanned in using a %4s scanf format specifier and so cmd must be an array of 5 chars. Increase size to 5 chars to ensure we don't have an overflow. Detected with static analysis by cppcheck: "(error) Width 4 given in format string (no. 1) is larger than destination buffer 'cmd[4]', use %3s to prevent overflowing it." Signed-off-by:
-
Dan Carpenter authored
lustre_cfg_new() returns error pointers and never NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Valerio Genovese authored
Removed extra space before comma in memset() as a part of checkpatch.pl fix-up. Signed-off-by:
Valerio Genovese <valerio.click@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
In combination with CONFIG_PROFILE_ANNOTATED_BRANCHES=y, the unlikely() inside of the WARN() macro becomes too complex for gcc to see that we don't use the output arguments of mt9m114_to_res() are used correctly: drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_get_fmt': drivers/staging/media/atomisp/i2c/mt9m114.c:817:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized] int width, height; ^~~~~~ drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_s_exposure_selection': drivers/staging/media/atomisp/i2c/mt9m114.c:1179:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized] Without WARN_ON(), there is no problem, so by simply replacing it with v4l2_err(), the warnings go away. The WARN() output is also not needed here, as we'd probably catch the problem before even getting here, and other checks for the same condition already use v4l2_err. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Alan Cox authored
UDS is another layer which actually boils down to some trivial assignments so remove it so inline the code. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
These are not used in the driver so can go away. Signed-off-by:
-
Alan Cox authored
This is a whole pile of code that wraps a single assignment. Remove it and put the assignment in the caller. Once we have the kernels sorted we should revisit these and remove all the pointless 1 item structs that go with it. Signed-off-by:
-
Alan Cox authored
This isn't used so it can go in the bitbucket. Signed-off-by:
-
Alan Cox authored
The base hmm MMU code doesn't support contiguous allocations (they BUG), so remove support from them from the higher levels of the heirarchy. We still need to unwind all these layers but it turns out that some of the init order stuff is rather sensitive and the simple cleanup breaks everything Signed-off-by:
-
Alan Cox authored
Where we know the buffer size is reasonably constrained we can just use kmalloc, and where it will be large vmalloc. This still leaves a pile in the middle. Signed-off-by:
-
Alan Cox authored
We have one hard coded set of behaviour so unpick the indirection and function pointers. This isn't the whole story. A lot of the callers are known sizes and use cases so we can switch them directly to kmalloc later on. Signed-off-by:
-
Alan Cox authored
We are not using these for debugging or debug logging so remove the defines, trim and rename the functions. Signed-off-by:
-
