# # Video configuration # menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 depends on !ARCH_ACORN && !ARCH_EBSA110 || !4xx && !8xx default y help Saying Y here will allow you to use Linux in text mode through a display that complies with the generic VGA standard. Virtually everyone wants that. The program SVGATextMode can be used to utilize SVGA video cards to their full potential in text mode. Download it from <ftp://ibiblio.org/pub/Linux/utils/console/>. Say Y. # if [ "$CONFIG_PCI" = "y" -a "$CONFIG_VGA_CONSOLE" = "y" ]; then # bool ' Allow VGA on any bus?' CONFIG_VGA_HOSE # if [ "$CONFIG_VGA_HOSE" = "y" ]; then # define_bool CONFIG_DUMMY_CONSOLE y # fi # fi config VIDEO_SELECT bool "Video mode selection support" depends on (X86 || X86_64) && VGA_CONSOLE ---help--- This enables support for text mode selection on kernel startup. If you want to take advantage of some high-resolution text mode your card's BIOS offers, but the traditional Linux utilities like SVGATextMode don't, you can say Y here and set the mode using the "vga=" option from your boot loader (lilo or loadlin) or set "vga=ask" which brings up a video mode menu on kernel startup. (Try "man bootparam" or see the documentation of your boot loader about how to pass options to the kernel.) Read the file <file:Documentation/svga.txt> for more information about the Video mode selection support. If unsure, say N. config MDA_CONSOLE tristate "MDA text console (dual-headed) (EXPERIMENTAL)" ---help--- Say Y here if you have an old MDA or monochrome Hercules graphics adapter in your system acting as a second head ( = video card). You will then be able to use two monitors with your Linux system. Do not say Y here if your MDA card is the primary card in your system; the normal VGA driver will handle it. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called mdacon. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. If unsure, say N. config SGI_NEWPORT_CONSOLE tristate "SGI Newport Console support" depends on SGI_IP22 help Say Y here if you want the console on the Newport aka XL graphics card of your Indy. Most people say Y here. # bool 'IODC console' CONFIG_IODC_CONSOLE config STI_CONSOLE tristate "STI text console" depends on PARISC default y help The STI console is the builtin display/keyboard on HP-PARISC machines. Say Y here to build support for it into your kernel. The alternative is to use your primary serial port as a console. config DUMMY_CONSOLE_COLUMNS int "Initial number of console screen columns" if STI_CONSOLE depends on PARISC default "160" help The default value is 160, which should fit a 1280x1024 monitor. Select 80 if you use a 640x480 resolution by default. config DUMMY_CONSOLE_ROWS int "Initial number of console screen rows" if STI_CONSOLE depends on PARISC default "64" help The default value is 64, which should fit a 1280x1024 monitor. Select 25 if you use a 640x480 resolution by default. config PROM_CONSOLE bool "PROM console" depends on SPARC32 || SPARC64 help Say Y to build a console driver for Sun machines that uses the terminal emulation built into their console PROMS. config DUMMY_CONSOLE bool depends on PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y default y config FRAMEBUFFER_CONSOLE tristate "Framebuffer Console support" depends on FB config PCI_CONSOLE bool depends on FRAMEBUFFER_CONSOLE default y config FONTS bool "Select compiled-in fonts" depends on FRAMEBUFFER_CONSOLE help Say Y here if you would like to use fonts other than the default your frame buffer console usually use. Note that the answer to this question won't directly affect the kernel: saying N will just cause the configurator to skip all the questions about foreign fonts. If unsure, say N (the default choices are safe). config FONT_8x8 bool "VGA 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one provided by the text console 80x50 (and higher) modes). Note that this is a poor quality font. The VGA 8x16 font is quite a lot more readable. Given the resolution provided by the frame buffer device, answer N here is safe. config FONT_8x16 bool "VGA 8x16 font" if FONTS depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one provided by the VGA text console 80x25 mode. If unsure, say Y. config FONT_6x11 bool "Mac console 6x11 font (not supported by all drivers)" if FONTS depends on FRAMEBUFFER_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS && MAC help Small console font with Macintosh-style high-half glyphs. Some Mac framebuffer drivers don't support this one at all. config FONT_PEARL_8x8 bool "Pearl (old m68k) console 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA help Small console font with PC-style control-character and high-half glyphs. config FONT_ACORN_8x8 bool "Acorn console 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN help Small console font with PC-style control characters and high-half glyphs. config FONT_MINI_4x6 bool "Mini 4x6 font" depends on !SPARC32 && !SPARC64 && FONTS config FONT_SUN8x16 bool "Sparc console 8x16 font" depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) help This is the high resolution console font for Sun machines. Say Y. config FONT_SUN12x22 bool "Sparc console 12x22 font (not supported by all drivers)" depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) help This is the high resolution console font for Sun machines with very big letters (like the letters used in the SPARC PROM). If the standard font is unreadable for you, say Y, otherwise say N. endmenu