/* Driver for USB Mass Storage compliant devices
 * Ununsual Devices File
 *
 * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
 *
 * Current development and maintenance by:
 *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
 *
 * Initial work by:
 *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
 *
 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
 * information about this driver.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/* IMPORTANT NOTE: This file must be included in another file which does
 * the following thing for it to work:
 * The macro UNUSUAL_DEV() must be defined before this file is included
 */
#include <linux/config.h>

/* If you edit this file, please try to keep it sorted first by VendorID,
 * then by ProductID.
 *
 * If you want to add an entry for this file, please send the following
 * to greg@kroah.com:
 *	- patch that adds the entry for your device which includes your
 *	  email address right above the entry.
 *	- a copy of /proc/bus/usb/devices with your device plugged in
 *	  running with this patch.
 *
 */

UNUSUAL_DEV(  0x03ee, 0x0000, 0x0000, 0x0245, 
		"Mitsumi",
		"CD-R/RW Drive",
		US_SC_8020, US_PR_CBI, NULL, 0), 

UNUSUAL_DEV(  0x03ee, 0x6901, 0x0000, 0x0100,
		"Mitsumi",
		"USB FDD",
		US_SC_UFI, US_PR_CBI, NULL,
		US_FL_SINGLE_LUN ),

UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200, 
		"HP",
		"CD-Writer+",
		US_SC_8070, US_PR_CB, NULL, 0), 

#ifdef CONFIG_USB_STORAGE_HP8200e
UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001, 
		"HP",
		"CD-Writer+ 8200e",
		US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0), 

UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001, 
		"HP",
		"CD-Writer+ CD-4e",
		US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0), 
#endif

/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
 * always fails and confuses drive; without US_FL_START_STOP, drive accesses
 * (read or write) all fail.
 */
UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
		"Buffalo",
		"DUB-P40G HDD",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY | US_FL_START_STOP),

#ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
		"Microtech",
		"CameraMate (DPCM_USB)",
 		US_SC_SCSI, US_PR_DPCM_USB, NULL,
		US_FL_START_STOP ),
#endif

/* Made with the help of Edd Dumbill <edd@usefulinc.com> */
UNUSUAL_DEV(  0x0451, 0x5409, 0x0001, 0x0001,
		"Frontier Labs",
		"Nex II Digital",
		US_SC_SCSI, US_PR_BULK, NULL, US_FL_START_STOP),

/* Reported by Paul Stewart <stewart@wetlogic.net>
 * This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
		"Hitachi",
		"DVD-CAM DZ-MV100A Camcorder",
		US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),

/* Reported by Khalid Aziz <khalid@gonehiking.org>
 * This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
		"Epson",
		"785EPX Storage",
		US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),

/* Reported by Jan Willamowius <jan@willamowius.de>
 * The device needs the flags only.
 */
UNUSUAL_DEV(  0x04c8, 0x0723, 0x0000, 0x9999,
		"Konica",
		"KD-200Z",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_START_STOP),

UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
		"Fujifilm",
		"FinePix 1400Zoom",
		US_SC_8070, US_PR_CBI, NULL, US_FL_FIX_INQUIRY),

/* Reported by Peter W�chtler <pwaechtler@loewe-komp.de>
 * The device needs the flags only.
 */
UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
		"ScanLogic",
		"SL11R-IDE",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY),

/* Reported by Kriston Fincher <kriston@airmail.net>
 * Patch submitted by Sean Millichamp <sean@bruenor.org>
 * This is to support the Panasonic PalmCam PV-SD4090
 * This entry is needed because the device reports Sub=ff 
 */
UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
		"Panasonic",
		"LS-120 Camera",
		US_SC_UFI, US_PR_CBI, NULL, 0),

/* From Yukihiro Nakai, via zaitcev@yahoo.com.
 * This is needed for CB instead of CBI */
UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
		"Sharp CE-CW05",
		"CD-R/RW Drive",
		US_SC_8070, US_PR_CB, NULL, 0),

/* Most of the following entries were developed with the help of
 * Shuttle/SCM directly.
 */
UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200, 
		"Matshita",
		"LS-120",
		US_SC_8020, US_PR_CB, NULL, 0),

UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100, 
		"Shuttle",
		"eUSCSI Bridge",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 
		US_FL_SCM_MULT_TARG ), 

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999, 
		"Sandisk",
		"ImageMate SDDR09",
		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),

/* This entry is from Andries.Brouwer@cwi.nl */
UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
		"SCM Microsystems",
		"eUSB SmartMedia / CompactFlash Adapter",
		US_SC_SCSI, US_PR_DPCM_USB, sddr09_init, 
		US_FL_START_STOP), 
#endif

UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0205, 
		"Shuttle",
		"eUSB MMC Adapter",
		US_SC_SCSI, US_PR_CB, NULL, 
		US_FL_SINGLE_LUN), 

UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200, 
		"Sony",
		"Hifd",
		US_SC_SCSI, US_PR_CB, NULL, 
		US_FL_SINGLE_LUN), 

UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200, 
		"Shuttle",
		"eUSB ATA/ATAPI Adapter",
		US_SC_8020, US_PR_CB, NULL, 0),

UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200, 
		"Shuttle",
		"eUSB CompactFlash Adapter",
		US_SC_8020, US_PR_CB, NULL, 0),

UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100, 
		"Shuttle",
		"eUSCSI Bridge",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 
		US_FL_SCM_MULT_TARG ), 

UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100, 
		"Shuttle",
		"eUSCSI Bridge",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 
		US_FL_SCM_MULT_TARG ), 

UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200, 
		"Shuttle",
		"CD-RW Device",
		US_SC_8020, US_PR_CB, NULL, 0),

/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
		"Belkin",
		"USB SCSI Adaptor",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ),

/* Iomega Clik! Drive 
 * Reported by David Chatenay <dchatenay@hotmail.com>
 * The reason this is needed is not fully known.
 */
UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
		"Iomega",
		"USB Clik! 40",
		US_SC_8070, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY | US_FL_START_STOP ),

/* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450, 
		"Sony",
		"DSC-S30/S70/S75/505V/F505/F707/F717/P8", 
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP | US_FL_MODE_XLATE ),

/* Reported by wim@geeks.nl */
UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100, 
		"Sony",
		"Memorystick NW-MS7",
		US_SC_UFI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),

UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100, 
		"Sony",
		"Memorystick MSAC-US1",
		US_SC_UFI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),

/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
UNUSUAL_DEV(  0x054c, 0x002e, 0x0106, 0x0310, 
		"Sony",
		"Handycam",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP | US_FL_MODE_XLATE),

UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
		"Sony",
		"Memorystick MSC-U01N",
		US_SC_UFI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),
		
/* Submitted by Nathan Babb <nathan@lexi.com> */
UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
		"Sony",
		"PEG Mass Storage",
		US_SC_8070, US_PR_CBI, NULL,
		US_FL_FIX_INQUIRY ),
		
UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299, 
		"Y-E Data",
		"Flashbuster-U",
		US_SC_UFI,  US_PR_CB, NULL,
		US_FL_SINGLE_LUN),

UNUSUAL_DEV(  0x057b, 0x0000, 0x0300, 0x9999, 
		"Y-E Data",
		"Flashbuster-U",
		US_SC_UFI,  US_PR_CBI, NULL,
		US_FL_SINGLE_LUN),

UNUSUAL_DEV(  0x059f, 0xa601, 0x0200, 0x0200, 
		"LaCie",
		"USB Hard Disk",
		US_SC_RBC, US_PR_CB, NULL, 0 ), 

/* This Pentax still camera is not conformant
 * to the USB storage specification: -
 * - It does not like the INQUIRY command. So we must handle this command
 *   of the SCSI layer ourselves.
 * Tested on Rev. 10.00 (0x1000)
 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
 */
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
                "ASAHI PENTAX",
                "PENTAX OPTIO 430",
                US_SC_8070, US_PR_CBI, NULL,
                US_FL_FIX_INQUIRY ),

/* This Pentax still camera is not conformant
 * to the USB storage specification: -
 * - It does not like the INQUIRY command. So we must handle this command
 *   of the SCSI layer ourselves.
 * Tested on Rev. 10.00 (0x1000)
 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
 */
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
                "ASAHI PENTAX",
                "PENTAX OPTIO 430",
                US_SC_8070, US_PR_CBI, NULL,
                US_FL_FIX_INQUIRY ),

#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
		"In-System",
		"USB/IDE Bridge (ATA/ATAPI)",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),

UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
		"In-System",
		"Portable USB Harddrive V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),

UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
		"In-System",
		"Portable USB Harddrive V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),

UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
		"In-System",
		"USB Storage Adapter V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),

UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
		"Sony",
		"Portable USB Harddrive V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),
#endif

#ifdef CONFIG_USB_STORAGE_JUMPSHOT
UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
		"Lexar",
		"Jumpshot USB CF Reader",
		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
		US_FL_MODE_XLATE ),
#endif

/* Reported by Blake Matheny <bmatheny@purdue.edu> */
UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
		"Lexar",
		"USB CF Reader",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

/* Reported by Carlos Villegas <cav@uniscope.co.jp>
 * This device needs an INQUIRY of exactly 36-bytes to function.
 * That is the only reason this entry is needed.
 */
UNUSUAL_DEV(  0x05e3, 0x0700, 0x0000, 0xffff,
		"SIIG",
		"CompactFlash Card Reader",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

/* Reported by Peter Marks <peter.marks@turner.com>
 * Like the SIIG unit above, this unit needs an INQUIRY to ask for exactly
 * 36 bytes of data.  No more, no less. That is the only reason this entry
 * is needed.
 *
 * ST818 slim drives (rev 0.02) don't need special care.
*/
UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0x0001,
		"EagleTec",
		"External Hard Disk",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

UNUSUAL_DEV(  0x05e3, 0x0700, 0x0000, 0x9999,
		"Unknown",
		"GL641USB based CF Card reader",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY | US_FL_MODE_XLATE),

UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100, 
		"TEAC",
		"Floppy Drive",
		US_SC_UFI, US_PR_CB, NULL, 0 ), 

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100, 
		"Olympus",
		"Camedia MAUSB-2",
		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),
#endif

/* Submitted by kedar@centillium
 * Needed for START_STOP flag, but that is unconfirmed */
UNUSUAL_DEV( 0x0686, 0x4006, 0x0001, 0x0001,
		"Minolta",
		"Dimage S304",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_START_STOP ),

/* Submitted by f.brugmans@hccnet.nl
 * Needed for START_STOP flag */
UNUSUAL_DEV( 0x0686, 0x4007, 0x0001, 0x0001,
		"Minolta",
		"Dimage S304",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_START_STOP ),

UNUSUAL_DEV(  0x0693, 0x0002, 0x0100, 0x0100, 
		"Hagiwara",
		"FlashGate SmartMedia",
		US_SC_SCSI, US_PR_BULK, NULL, 0 ),

UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
		"Hagiwara",
		"Flashgate",
		US_SC_SCSI, US_PR_BULK, NULL, 0 ), 

UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200, 
		"Sandisk",
		"ImageMate SDDR-05a",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP),

UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009, 
		"Sandisk",
		"ImageMate SDDR-31",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_IGNORE_SER),

UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
		"Sandisk",
		"ImageMate SDDR-12",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN ),

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999, 
		"Sandisk",
		"ImageMate SDDR-09",
		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),
#endif

#ifdef CONFIG_USB_STORAGE_FREECOM
UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
		"Freecom",
		"USB-IDE",
		US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
#endif

UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133, 
		"Microtech",
		"USB-SCSI-DB25",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ), 

UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100, 
		"Microtech",
		"USB-SCSI-HD50",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ), 

#ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
		"Microtech",
		"CameraMate (DPCM_USB)",
 		US_SC_SCSI, US_PR_DPCM_USB, NULL,
		US_FL_START_STOP ),
#endif

#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
		"Datafab",
		"MDCFE-B USB CF Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

	/*
	 * The following Datafab-based devices may or may not work
	 * using the current driver...the 0xffff is arbitrary since I
	 * don't know what device versions exist for these guys.
	 *
	 * The 0xa003 and 0xa004 devices in particular I'm curious about.
	 * I'm told they exist but so far nobody has come forward to say that
	 * they work with this driver.  Given the success we've had getting
	 * other Datafab-based cards operational with this driver, I've decided
	 * to leave these two devices in the list.
	 */
UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
		"SIIG/Datafab",
		"SIIG/Datafab Memory Stick+CF Reader/Writer",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
		"Datafab/Unknown",
		"Datafab-based Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
		"Datafab/Unknown",
		"Datafab-based Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
		"PNY/Datafab",
		"PNY/Datafab CF+SM Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
		"Simple Tech/Datafab",
		"Simple Tech/Datafab CF+SM Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

/* Submitted by Olaf Hering <olh@suse.de> */
UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
		"Datafab Systems, Inc.",
		"USB to CF + SM Combo (LC1)",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),
#endif
		
#ifdef CONFIG_USB_STORAGE_SDDR55
/* Contributed by Peter Waechtler */
UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
		"Datafab",
		"MDSM-B reader",
		US_SC_SCSI, US_PR_SDDR55, NULL,
		US_FL_FIX_INQUIRY ),
#endif

/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
 * Only revision 1.13 tested (same for all of the above devices,
 * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
 * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
 * See also http://martin.wilck.bei.t-online.de/#kecf .
 */
UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
		"Datafab",
		"KECF-USB",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
 * to the USB storage specification in two ways:
 * - They tell us they are using transport protocol CBI. In reality they
 *   are using transport protocol CB.
 * - They don't like the INQUIRY command. So we must handle this command
 *   of the SCSI layer ourselves.
 */
UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9009,
		"Casio",
		"QV DigitalCamera",
		US_SC_8070, US_PR_CB, NULL,
		US_FL_FIX_INQUIRY ),

/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
		"Feiya",
		"5-in-1 Card Reader",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_CAPACITY ),

UNUSUAL_DEV(  0x097a, 0x0001, 0x0000, 0x0001,
		"Minds@Work",
		"Digital Wallet",
 		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV(  0x0a16, 0x8888, 0x0100, 0x0100,
		"IBM",
		"IBM USB Memory Key",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

UNUSUAL_DEV(  0x0a16, 0x8888, 0x0100, 0x0100,
		"IBM",
		"IBM USB Memory Key",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),
		
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
		"ATI",
		"USB Cable 205",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),
#endif

/* EasyDisk support. Submitted by Stanislav Karchebny <berk@madfire.net> */
UNUSUAL_DEV(  0x1065, 0x2136, 0x0000, 0x0001,
		"Global Channel Solutions",
		"EasyDisk EDxxxx",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_MODE_XLATE | US_FL_START_STOP | US_FL_FIX_INQUIRY ),

/* This Pentax still camera is not conformant
 * to the USB storage specification: -
 * - It does not like the INQUIRY command. So we must handle this command
 *   of the SCSI layer ourselves.
 * Tested on Rev. 10.00 (0x1000)
 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
 */
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
                "Pentax",
                "Optio 2/3/400",
                US_SC_8070, US_PR_CBI, NULL,
                US_FL_FIX_INQUIRY ),

/* Submitted by Per Winkvist <per.winkvist@uk.com> */
UNUSUAL_DEV( 0x0a17, 0x006, 0x1000, 0x9009,
                "Pentax",
                "Optio S",
                US_SC_8070, US_PR_CBI, NULL,
                US_FL_FIX_INQUIRY ),

/* Submitted by Brian Hall <brihall@pcisys.net>
 * Needed for START_STOP flag */
UNUSUAL_DEV(  0x0c76, 0x0003, 0x0100, 0x0100,
		"JMTek",
		"USBDrive",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_START_STOP ),
UNUSUAL_DEV(  0x0c76, 0x0005, 0x0100, 0x0100,
		"JMTek",
		"USBDrive",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_START_STOP ),

/* Reported by Dan Pilone <pilone@slac.com>
 * The device needs the flags only.
 * Also reported by Brian Hall <brihall@pcisys.net>, again for flags.
 * I also suspect this device may have a broken serial number.
 */
UNUSUAL_DEV(  0x1065, 0x2136, 0x0000, 0x9999,
		"CCYU TECHNOLOGY",
		"EasyDisk Portable Device",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_MODE_XLATE | US_FL_START_STOP),

#ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999, 
		"Sandisk",
		"ImageMate SDDR55",
		US_SC_SCSI, US_PR_SDDR55, NULL,
		US_FL_SINGLE_LUN),
#endif