increase save_master_pos timeout to 30 seconds for higher test predictability

    better replicaiton test cleanup to ensure better test predictability
+ some ndb test cleanup


client/mysqltest.c:
  increase save_master_pos timeout to 30 seconds for higher test predictability
mysql-test/extra/rpl_tests/rpl_ddl.test:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/extra/rpl_tests/rpl_row_UUID.test:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/r/rpl_ndb_dd_advance.result:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/r/rpl_ndb_sync.result:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/t/disabled.def:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_bank.test:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_basic.test:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_dd_advance.test:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_dd_basic.test:
  better replicaiton test cleanup to ensure better test predictability
mysql-test/t/rpl_ndb_sync.test:
  better replicaiton test cleanup to ensure better test predictability

client/mysqltest.c

@@ -1596,9 +1596,9 @@ int do_sync_with_master2(long offset)
       It may be that the slave SQL thread has not started yet, though START
       SLAVE has been issued ?
     */
-    if (tries++ == 3)
+    if (tries++ == 30)
       die("could not sync with master ('%s' returned NULL)", query_buf);
-    sleep(1); /* So at most we will wait 3 seconds and make 4 tries */
+    sleep(1); /* So at most we will wait 30 seconds and make 31 tries */
     mysql_free_result(res);
     goto wait_for_position;
   }
@@ -1664,14 +1664,14 @@ int do_save_master_pos()
     {
       ulonglong epoch=0, tmp_epoch= 0;
       int count= 0;
-
-      do
+      int do_continue= 1;
+      while (do_continue)
       {
         const char binlog[]= "binlog";
         const char latest_trans_epoch[]=
           "latest_trans_epoch=";
-        const char latest_applied_binlog_epoch[]=
-          "latest_applied_binlog_epoch=";
+        const char latest_handled_binlog_epoch[]=
+          "latest_handled_binlog_epoch=";
         if (count)
           sleep(1);
         if (mysql_query(mysql, query= "show engine ndb status"))
@@ -1701,26 +1701,32 @@ int do_save_master_pos()
                     start_lineno, latest_trans_epoch, query);
             }
             /* latest_applied_binlog_epoch */
-            while (*status && strncmp(status, latest_applied_binlog_epoch,
-                                      sizeof(latest_applied_binlog_epoch)-1))
+            while (*status && strncmp(status, latest_handled_binlog_epoch,
+                                      sizeof(latest_handled_binlog_epoch)-1))
               status++;
             if (*status)
             {
-              status+= sizeof(latest_applied_binlog_epoch)-1;
+              status+= sizeof(latest_handled_binlog_epoch)-1;
               tmp_epoch= strtoull(status, (char**) 0, 10);
             }
             else
               die("line %u: result does not contain '%s' in '%s'",
-                  start_lineno, latest_applied_binlog_epoch, query);
+                  start_lineno, latest_handled_binlog_epoch, query);
             break;
           }
         }
-        mysql_free_result(res);
         if (!row)
           die("line %u: result does not contain '%s' in '%s'",
               start_lineno, binlog, query);
         count++;
-      } while (tmp_epoch < epoch && count <= 3);
+        if (tmp_epoch >= epoch)
+          do_continue= 0;
+        else if (count > 30)
+        {
+          break;
+        }
+        mysql_free_result(res);
+      }
     }
   }
 #endif

mysql-test/extra/rpl_tests/rpl_ddl.test

@@ -507,4 +507,5 @@ DROP DATABASE IF EXISTS mysqltest2;
 DROP DATABASE IF EXISTS mysqltest3;
 --enable_warnings
 
+-- source include/master-slave-end.inc
 

mysql-test/extra/rpl_tests/rpl_row_UUID.test

@@ -80,3 +80,4 @@ DROP TABLE test.t2;
 # be removed at next testsuite run.
 
 # End of 5.0 test case
+-- source include/master-slave-end.inc

mysql-test/r/rpl_ndb_dd_advance.result

@@ -370,13 +370,10 @@ COUNT(*)
 10000
 ***** Add some more records to master *********
 ***** Finsh the slave sync process *******
-* 1. *
 @the_epoch:=MAX(epoch)
 <the_epoch>
-* 2. *
 @the_pos:=Position	@the_file:=SUBSTRING_INDEX(FILE, '/', -1)
 <the_pos>	master-bin.000001
-* 3. *
 * 4. *
 * 5. *
 START SLAVE;

mysql-test/r/rpl_ndb_sync.result

@@ -25,13 +25,13 @@ hex(c2)	hex(c3)	c1
 0	1	BCDEF
 1	0	CD
 0	0	DEFGHIJKL
-CREATE TEMPORARY TABLE IF NOT EXISTS cluster.backup_info (id INT, backup_id INT)ENGINE=HEAP;
-DELETE FROM cluster.backup_info;
-LOAD DATA INFILE '../tmp.dat' INTO TABLE cluster.backup_info FIELDS TERMINATED BY ',';
-SELECT @the_backup_id:=backup_id FROM cluster.backup_info;
+CREATE TEMPORARY TABLE IF NOT EXISTS test.backup_info (id INT, backup_id INT) ENGINE = HEAP;
+DELETE FROM test.backup_info;
+LOAD DATA INFILE '../tmp.dat' INTO TABLE test.backup_info FIELDS TERMINATED BY ',';
+SELECT @the_backup_id:=backup_id FROM test.backup_info;
 @the_backup_id:=backup_id
 <the_backup_id>
-DROP TABLE cluster.backup_info;
+DROP TABLE test.backup_info;
 UPDATE t1 SET c2=0 WHERE c3="row2";
 SELECT hex(c1),hex(c2),c3 FROM t1 ORDER BY c3;
 hex(c1)	hex(c2)	c3

mysql-test/t/disabled.def

@@ -17,15 +17,15 @@ ndb_autodiscover2       : Needs to be fixed w.r.t binlog
 #ndb_cache2              : Bug #18597 simultaneous drop table and ndb statistics update triggers node failure
 #ndb_gis                 : Bug #18600 ndb_gis test failure
 #ndb_load                : Bug#17233 failed load data from infile causes mysqld dbug_assert, binlog not flushed
-#partition_03ndb         : Bug#16385 Partitions: crash when updating a range partitioned NDB table
+partition_03ndb         : Bug#16385 Partitions: crash when updating a range partitioned NDB table
 ps_7ndb                 : dbug assert in RBR mode when executing test suite
-#rpl_ndb_2innodb         : assertion in get_parts_for_update()
-#rpl_ndb_2myisam         : assertion in get_parts_for_update()
+rpl_ndb_2innodb         : Bug #19004 ndb: partition by range and update hangs (note, test must also be updated to have primary key with blob table)
+rpl_ndb_2myisam         : Bug #19004 ndb: partition by range and update hangs (note, test must also be updated to have primary key with blob table)
 rpl_ndb_auto_inc        : Bug#17086 CR: auto_increment_increment and auto_increment_offset produce duplicate key er
 #rpl_ndb_basic           : Bug #18592 rpl_ndb_basic failure
 #rpl_ndb_dd_advance      : Bug #18924 rpl_ndb_dd_advance failure
 #rpl_ndb_dd_basic        : Bug #18569 rpl_ndb_dd_basic failure
-#rpl_ndb_ddl             : master hangs
+rpl_ndb_ddl             : result file needs update + test needs to checked
 #rpl_ndb_insert_ignore   : Bug #18567 rpl_ndb_insert_ignore failure
 #rpl_ndb_innodb2ndb      : Bug#18261: Cluster Replication: tests rpl_ndb_xxx2ndb fails
 #rpl_ndb_log             : result not deterministic, TBD if should remove

mysql-test/t/rpl_ndb_bank.test

@@ -132,34 +132,7 @@ let the_backup_id=`select @the_backup_id`;
 
 #
 # now setup replication to continue from last epoch
-# 1. get apply_status epoch from slave
-# 2. get corresponding _next_ binlog postition from master
-# 3. change master on slave
-# 4. start the replication
-
-# 1.
---connection slave
---replace_column 1 <the_epoch>
-SELECT @the_epoch:=MAX(epoch) FROM cluster.apply_status;
---let $the_epoch= `select @the_epoch`
-
-# 2.
---connection master
---replace_result $the_epoch <the_epoch>
---replace_column 1 <the_pos>
-eval SELECT @the_pos:=Position,@the_file:=SUBSTRING_INDEX(FILE, '/', -1)
-   FROM cluster.binlog_index WHERE epoch > $the_epoch ORDER BY epoch ASC LIMIT 1;
---let $the_pos= `SELECT @the_pos`
---let $the_file= `SELECT @the_file`
-
-# 3.
---connection slave
---replace_result $the_pos <the_pos>
-eval CHANGE MASTER TO
-  master_log_file = '$the_file',
-  master_log_pos = $the_pos;
-
-# 4.
+--source include/ndb_setup_slave.inc
 --connection slave
 START SLAVE;
 

mysql-test/t/rpl_ndb_basic.test

@@ -146,4 +146,4 @@ select * from t1 order by nid;
 # cleanup
 --connection master
 DROP TABLE t1;
-sync_slave_with_master;
+-- source include/master-slave-end.inc

mysql-test/t/rpl_ndb_dd_advance.test

@@ -479,29 +479,9 @@ while ($j)
 # 5. start the replication
 
 --echo ***** Finsh the slave sync process *******
-# 1.
---echo * 1. *
-connection slave;
 --disable_query_log
---replace_column 1 <the_epoch>
-SELECT @the_epoch:=MAX(epoch) FROM cluster.apply_status;
---let $the_epoch= `select @the_epoch`
-
-# 2.
---echo * 2. *
-connection master;
---replace_column 1 <the_pos>
-eval SELECT @the_pos:=Position,@the_file:=SUBSTRING_INDEX(FILE, '/', -1)
-   FROM cluster.binlog_index WHERE epoch > $the_epoch ORDER BY epoch ASC LIMIT 1;
---let $the_pos= `SELECT @the_pos`
---let $the_file= `SELECT @the_file`
-
-# 3.
---echo * 3. *
-connection slave;
-eval CHANGE MASTER TO
-  master_log_file = '$the_file',
-  master_log_pos = $the_pos;
+# 1. 2. 3.
+--source include/ndb_setup_slave.inc
 --enable_query_log
 
 # 4.

mysql-test/t/rpl_ndb_dd_basic.test

@@ -82,4 +82,4 @@ drop datafile 'datafile02.dat'
 engine=ndb;
 DROP TABLESPACE ts1 ENGINE=NDB;
 DROP LOGFILE GROUP lg1 ENGINE=NDB;
---sync_slave_with_master
+-- source include/master-slave-end.inc

mysql-test/t/rpl_ndb_sync.test

@@ -8,13 +8,13 @@
 #
 
 # stop the save
-connection slave;
+--connection slave
 STOP SLAVE;
 CREATE DATABASE ndbsynctest;
 USE ndbsynctest;
 
 # get some data on the master
-connection master;
+--connection master
 CREATE DATABASE ndbsynctest;
 USE ndbsynctest;
 CREATE TABLE t1 (c1 BIT(1) NOT NULL, c2 BIT(1) NOT NULL, c3 CHAR(15), PRIMARY KEY(c3)) ENGINE = NDB ;
@@ -25,21 +25,14 @@ SELECT hex(c1),hex(c2),c3 FROM t1 ORDER BY c3;
 SELECT hex(c2),hex(c3),c1 FROM t2 ORDER BY c1;
 
 # take a backup on master
---exec $NDB_MGM --no-defaults --ndb-connectstring="localhost:$NDBCLUSTER_PORT" -e "start backup" >> $NDB_TOOLS_OUTPUT
---exec $NDB_TOOLS_DIR/ndb_select_all --no-defaults --ndb-connectstring="localhost:$NDBCLUSTER_PORT" -d sys --delimiter=',' SYSTAB_0 | grep 520093696 > $MYSQLTEST_VARDIR/tmp.dat
-CREATE TEMPORARY TABLE IF NOT EXISTS cluster.backup_info (id INT, backup_id INT)ENGINE=HEAP;
-DELETE FROM cluster.backup_info;
-LOAD DATA INFILE '../tmp.dat' INTO TABLE cluster.backup_info FIELDS TERMINATED BY ',';
---replace_column 1 <the_backup_id>
-SELECT @the_backup_id:=backup_id FROM cluster.backup_info;
-let the_backup_id=`select @the_backup_id` ;
-DROP TABLE cluster.backup_info;
+--source include/ndb_backup.inc
+
 # update a row
 UPDATE t1 SET c2=0 WHERE c3="row2";
 SELECT hex(c1),hex(c2),c3 FROM t1 ORDER BY c3;
 
 # restore on slave, first check that nothing is there
-connection slave
+--connection slave
 
 # we should have no tables
 SHOW TABLES;
@@ -66,40 +59,16 @@ SELECT hex(c2),hex(c3),c1 FROM t2 ORDER BY c1;
 
 #
 # now setup replication to continue from last epoch
-# 1. get apply_status epoch from slave
-# 2. get corresponding _next_ binlog postition from master
-# 3. change master on slave
-
-# 1.
-connection slave;
---replace_column 1 <the_epoch>
-SELECT @the_epoch:=MAX(epoch) FROM cluster.apply_status;
-let $the_epoch= `select @the_epoch` ;
-
-# 2.
-connection master;
---replace_result $the_epoch <the_epoch>
---replace_column 1 <the_pos>
-eval SELECT @the_pos:=Position,@the_file:=SUBSTRING_INDEX(FILE, '/', -1)
-   FROM cluster.binlog_index WHERE epoch > $the_epoch ORDER BY epoch ASC LIMIT 1;
-let $the_pos= `SELECT @the_pos` ;
-let $the_file= `SELECT @the_file` ;
-
-# 3.
-connection slave;
---replace_result $the_pos <the_pos>
-eval CHANGE MASTER TO
-  master_log_file = '$the_file',
-  master_log_pos = $the_pos ;
+--source include/ndb_setup_slave.inc
+--connection slave
 START SLAVE;
 
 #
 #
 #
-connection master;
-#sync_slave_with_master;
---sleep 2
-connection slave;
+--connection master
+--sync_slave_with_master
+--connection slave
 --replace_result $MASTER_MYPORT MASTER_PORT
 --replace_column 1 <Slave_IO_State> 7 <Read_Master_Log_Pos> 8 <Relay_Log_File> 9 <Relay_Log_Pos> 16 <Replicate_Ignore_Table> 22 <Exec_Master_Log_Pos> 23 <Relay_Log_Space> 33 <Seconds_Behind_Master>
 SHOW SLAVE STATUS;
@@ -111,22 +80,21 @@ SELECT hex(c2),hex(c3),c1 FROM t2 ORDER BY c1;
 # Cleanup
 #
 
-connection master;
+--connection master
 DROP DATABASE ndbsynctest;
-#sync_slave_with_master;
---sleep 2
-connection slave;
+--sync_slave_with_master
+--connection slave
 STOP SLAVE;
 
 #
 # Test some replication commands
 #
-connection master;
+--connection master
 reset master;
 # should now contain nothing
 select * from cluster.binlog_index;
 
-connection slave;
+--connection slave
 reset slave;
 # should now contain nothing
 select * from cluster.apply_status;