Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that

partition is corrupt

The main problem was that ALTER TABLE t ANALYZE/CHECK/OPTIMIZE/REPAIR
PARTITION took another code path (over mysql_alter_table instead of
mysql_admin_table) which differs in two ways:
1) alter table opens the tables in a different way than admin tables do
   resulting in returning with error before it tried the command
2) alter table does not start to send any diagnostic rows to the client
   which the lower admin functions continue to use -> resulting in
   assertion crash

The fix:
Remapped ALTER TABLE t ANALYZE/CHECK/OPTIMIZE/REPAIR PARTITION to use
the same code path as ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE t.
Adding check in mysql_admin_table to setup the partition list for
which partitions that should be used.


Partitioned tables will still not work with
REPAIR TABLE/PARTITION USE_FRM, since that requires moving partitions
to tables, REPAIR TABLE t USE_FRM, and check that the data still
fulfills the partitioning function and then move the table back to
being a partition.

NOTE: I have removed the following functions from the handler
interface:
analyze_partitions, check_partitions, optimize_partitions,
repair_partitions
Since they are not longer needed.
THIS ALTERS THE STORAGE ENGINE API

mysql-test/r/handler_innodb.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added a note result row.
mysql-test/r/innodb.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added a note result row.
mysql-test/r/innodb_mysql.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added a note result row.
mysql-test/r/partition.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Updated after fixing ANALYZE/CHECK/OPTIMIZE/REPAIR partitioned
  tables.
mysql-test/r/trigger-trans.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added a note result row.
mysql-test/suite/ndb/r/ndb_partition_key.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Updated after fixing ANALYZE/CHECK/OPTIMIZE/REPAIR partitioned
  tables.
mysql-test/suite/ndb/t/ndb_partition_key.test:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Updated after fixing ANALYZE/CHECK/OPTIMIZE/REPAIR partitioned
  tables.
mysql-test/suite/parts/inc/partition_alter4.inc:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Updated after fixing ANALYZE/CHECK/OPTIMIZE/REPAIR partitioned
  tables.
mysql-test/suite/parts/r/partition_alter4_innodb.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Updated after fixing ANALYZE/CHECK/OPTIMIZE/REPAIR partitioned
  tables.
mysql-test/suite/parts/r/partition_alter4_myisam.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Updated after fixing ANALYZE/CHECK/OPTIMIZE/REPAIR partitioned
  tables.
mysql-test/suite/rpl/r/rpl_failed_optimize.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added a note result row.
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added a note result row.
mysql-test/t/partition.test:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Updated after fixing ANALYZE/CHECK/OPTIMIZE/REPAIR partitioned
  tables.
sql/ha_partition.cc:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added a function for returning admin commands result rows
  Updated handle_opt_partitions to handle admin commands result rows,
  and some error filtering (as mysql_admin_table do).
  
  Removed the functions analyze/check/optimize/repair_partitions
  since they have no longer any use.
sql/ha_partition.h:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Removed analyze/check/optimize/repair_partitions since they
  are no longer are needed.
sql/handler.cc:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Removed analyze/check/optimize/repair_partitions since they
  are no longer are needed.
sql/handler.h:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Removed analyze/check/optimize/repair_partitions since they
  are no longer are needed.
sql/mysql_priv.h:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added set_part_state for reuse of code in mysql_admin_table.
  (Originally fond in sql/sql_partition.cc:prep_alter_part_table)
sql/protocol.cc:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added one assert and a debug print.
sql/sql_partition.cc:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Refactored code for setting up partition state, set_part_state,
  now used in both prep_alter_part_table and
  sql_table.cc:mysql_admin_table.
  Removed code for handling ANALYZE/CHECK/OPTIMIZE/REPAIR partitions,
  since it is now handled by mysql_admin_table.
sql/sql_table.cc:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Added functionality in mysql_admin_table to work with partitioned
  tables.
  Fixed a possible assertion bug for HA_ADMIN_TRY_ALTER
  (If analyze would output a row, it fails since the row was already
  started).
sql/sql_yacc.yy:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Remapped ALTER TABLE t ANALYZE/CHECK/OPTIMIZE/REPAIR PARTITION
  to use the same code path as ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE
  instead of taking the ALTER TABLE path.
  Added reset of alter_info for ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE
  since it is now used by partitioned tables.
storage/myisam/mi_check.c:
  Bug#20129: ALTER TABLE ... REPAIR PARTITION ... complains that
  partition is corrupt
  
  Changed warning message from "Found X parts  Should be: Y parts"
  to "Found X key parts. Should be Y", since it could be confusing
  with partitioned tables.

mysql-test/r/handler_innodb.result

@@ -484,6 +484,7 @@ c1
 handler t1 close;
 read the result from the other connection
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	status	OK
 proceed with the normal connection
 drop table t1;
@@ -698,6 +699,7 @@ handler a2 read a first;
 a
 optimize table t1;
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	status	OK
 handler a1 close;
 ERROR 42S02: Unknown table 'a1' in HANDLER

mysql-test/r/innodb.result

@@ -166,6 +166,7 @@ level	id	parent_id
 1	1007	101
 optimize table t1;
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	status	OK
 show keys from t1;
 Table	Non_unique	Key_name	Seq_in_index	Column_name	Collation	Cardinality	Sub_part	Packed	Null	Index_type	Comment
@@ -190,6 +191,7 @@ create table t1 (a int) engine=innodb;
 insert into t1 values (1), (2);
 optimize table t1;
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	status	OK
 delete from t1 where a = 1;
 select * from t1;
@@ -738,6 +740,7 @@ world	2
 hello	1
 optimize table t1;
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	status	OK
 show keys from t1;
 Table	Non_unique	Key_name	Seq_in_index	Column_name	Collation	Cardinality	Sub_part	Packed	Null	Index_type	Comment
@@ -3109,6 +3112,7 @@ BEGIN;
 INSERT INTO t1 VALUES (1);
 OPTIMIZE TABLE t1;
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	status	OK
 DROP TABLE t1;
 CREATE TABLE t1 (id int PRIMARY KEY, f int NOT NULL, INDEX(f)) ENGINE=InnoDB;

mysql-test/r/innodb_mysql.result

@@ -577,6 +577,7 @@ id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 INSERT INTO t2 SELECT * FROM t1;
 OPTIMIZE TABLE t2;
 Table	Op	Msg_type	Msg_text
+test.t2	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t2	optimize	status	OK
 EXPLAIN SELECT COUNT(*) FROM t2 WHERE stat_id IN (1,3) AND acct_id=785;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra

mysql-test/r/partition.result

@@ -538,7 +538,7 @@ PARTITION BY LIST (a)
 (PARTITION x1 VALUES IN (10), PARTITION x2 VALUES IN (20));
 analyze table t1;
 Table	Op	Msg_type	Msg_text
-test.t1	analyze	note	The storage engine for the table doesn't support analyze
+test.t1	analyze	status	OK
 drop table t1;
 create table t1
 (a int)
@@ -1239,7 +1239,11 @@ SHOW TABLE STATUS;
 Name	Engine	Version	Row_format	Rows	Avg_row_length	Data_length	Max_data_length	Index_length	Data_free	Auto_increment	Create_time	Update_time	Check_time	Collation	Checksum	Create_options	Comment
 t1	MyISAM	10	Fixed	1	14	14	0	0	7	NULL	NULL	NULL	NULL	latin1_swedish_ci	NULL	partitioned	
 ALTER TABLE t1 OPTIMIZE PARTITION p0;
-ERROR 42000: The storage engine for the table doesn't support optimize partition
+Table	Op	Msg_type	Msg_text
+test.t1	optimize	status	OK
+SHOW TABLE STATUS;
+Name	Engine	Version	Row_format	Rows	Avg_row_length	Data_length	Max_data_length	Index_length	Data_free	Auto_increment	Create_time	Update_time	Check_time	Collation	Checksum	Create_options	Comment
+t1	MyISAM	10	Fixed	1	7	7	0	1024	0	NULL	NULL	NULL	NULL	latin1_swedish_ci	NULL	partitioned	
 DROP TABLE t1;
 CREATE TABLE t1 (a int, index(a)) PARTITION BY KEY(a);
 ALTER TABLE t1 DISABLE KEYS;
@@ -1499,13 +1503,17 @@ ERROR 42000: You have an error in your SQL syntax; check the manual that corresp
 ALTER TABLE t1 ANALYZE PARTITION p1 EXTENDED;
 ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'EXTENDED' at line 1
 ALTER TABLE t1 ANALYZE PARTITION p1;
-ERROR 42000: The storage engine for the table doesn't support analyze partition
+Table	Op	Msg_type	Msg_text
+test.t1	analyze	status	OK
 ALTER TABLE t1 CHECK PARTITION p1;
-ERROR 42000: The storage engine for the table doesn't support check partition
+Table	Op	Msg_type	Msg_text
+test.t1	check	status	OK
 ALTER TABLE t1 REPAIR PARTITION p1;
-ERROR 42000: The storage engine for the table doesn't support repair partition
+Table	Op	Msg_type	Msg_text
+test.t1	repair	status	OK
 ALTER TABLE t1 OPTIMIZE PARTITION p1;
-ERROR 42000: The storage engine for the table doesn't support optimize partition
+Table	Op	Msg_type	Msg_text
+test.t1	optimize	status	OK
 DROP TABLE t1;
 CREATE TABLE t1 (s1 BIGINT UNSIGNED)
 PARTITION BY RANGE (s1) (

mysql-test/r/trigger-trans.result

@@ -19,6 +19,7 @@ a	b
 THE LION	13
 optimize table t1;
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	status	OK
 select trigger_schema, trigger_name, event_object_schema,
 event_object_table, action_statement from information_schema.triggers

mysql-test/suite/ndb/r/ndb_partition_key.result

@@ -192,14 +192,30 @@ DROP TABLE t1;
 CREATE TABLE t1 (a int primary key)
 ENGINE=NDB
 PARTITION BY KEY(a);
+ANALYZE TABLE t1;
+Table	Op	Msg_type	Msg_text
+test.t1	analyze	note	The storage engine for the table doesn't support analyze
+CHECK TABLE t1;
+Table	Op	Msg_type	Msg_text
+test.t1	check	note	The storage engine for the table doesn't support check
+OPTIMIZE TABLE t1;
+Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	The storage engine for the table doesn't support optimize
+REPAIR TABLE t1;
+Table	Op	Msg_type	Msg_text
+test.t1	repair	note	The storage engine for the table doesn't support repair
 ALTER TABLE t1 OPTIMIZE PARTITION p0;
-ERROR HY000: Table storage engine for 't1' doesn't have this option
+Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	The storage engine for the table doesn't support optimize
 ALTER TABLE t1 CHECK PARTITION p0;
-ERROR HY000: Table storage engine for 't1' doesn't have this option
+Table	Op	Msg_type	Msg_text
+test.t1	check	note	The storage engine for the table doesn't support check
 ALTER TABLE t1 REPAIR PARTITION p0;
-ERROR HY000: Table storage engine for 't1' doesn't have this option
+Table	Op	Msg_type	Msg_text
+test.t1	repair	note	The storage engine for the table doesn't support repair
 ALTER TABLE t1 ANALYZE PARTITION p0;
-ERROR HY000: Table storage engine for 't1' doesn't have this option
+Table	Op	Msg_type	Msg_text
+test.t1	analyze	note	The storage engine for the table doesn't support analyze
 ALTER TABLE t1 REBUILD PARTITION p0;
 ERROR HY000: Table storage engine for 't1' doesn't have this option
 DROP TABLE t1;

mysql-test/suite/ndb/t/ndb_partition_key.test

@@ -175,15 +175,15 @@ DROP TABLE t1;
 CREATE TABLE t1 (a int primary key)
 ENGINE=NDB
 PARTITION BY KEY(a);
---error 1031
+ANALYZE TABLE t1;
+CHECK TABLE t1;
+OPTIMIZE TABLE t1;
+REPAIR TABLE t1;
 ALTER TABLE t1 OPTIMIZE PARTITION p0;
---error 1031
 ALTER TABLE t1 CHECK PARTITION p0;
---error 1031
 ALTER TABLE t1 REPAIR PARTITION p0;
---error 1031
 ALTER TABLE t1 ANALYZE PARTITION p0;
---error 1031
+--error ER_ILLEGAL_HA
 ALTER TABLE t1 REBUILD PARTITION p0;
 DROP TABLE t1;
 

mysql-test/suite/parts/inc/partition_alter4.inc

@@ -31,6 +31,9 @@ let $alter= ALTER TABLE t1 ANALYZE PARTITION part_1,part_2,part_5,part_6,part_10
 --echo #  1.4 ALTER ... ANALYZE PARTITION part_1,part_1,part_1;
 let $alter= ALTER TABLE t1 ANALYZE PARTITION part_1,part_1,part_1;
 --source suite/parts/inc/partition_alter_41.inc
+--echo #  1.5 ALTER ... ANALYZE PARTITION ALL;
+let $alter= ALTER TABLE t1 ANALYZE PARTITION ALL;
+--source suite/parts/inc/partition_alter_41.inc
 
 --echo #------------------------------------------------------------------------
 --echo #  2   ALTER ... CHECK PARTITION
@@ -47,6 +50,9 @@ let $alter= ALTER TABLE t1 CHECK PARTITION part_1,part_2,part_5,part_6,part_10;
 --echo #  2.4 ALTER ... CHECK PARTITION part_1,part_1,part_1;
 let $alter= ALTER TABLE t1 CHECK PARTITION part_1,part_1,part_1;
 --source suite/parts/inc/partition_alter_41.inc
+--echo #  2.5 ALTER ... CHECK PARTITION ALL;
+let $alter= ALTER TABLE t1 CHECK PARTITION ALL;
+--source suite/parts/inc/partition_alter_41.inc
 
 --echo #------------------------------------------------------------------------
 --echo #  3   ALTER ... OPTIMIZE PARTITION
@@ -63,6 +69,9 @@ let $alter= ALTER TABLE t1 OPTIMIZE PARTITION part_1,part_2,part_5,part_6,part_1
 --echo #  3.4 ALTER ... OPTIMIZE PARTITION part_1,part_1,part_1;
 let $alter= ALTER TABLE t1 OPTIMIZE PARTITION part_1,part_1,part_1;
 --source suite/parts/inc/partition_alter_41.inc
+--echo #  3.5 ALTER ... OPTIMIZE PARTITION ALL;
+let $alter= ALTER TABLE t1 OPTIMIZE PARTITION ALL;
+--source suite/parts/inc/partition_alter_41.inc
 
 --echo #------------------------------------------------------------------------
 --echo #  4   ALTER ... REBUILD PARTITION
@@ -79,6 +88,9 @@ let $alter= ALTER TABLE t1 REBUILD PARTITION part_1,part_2,part_5,part_6,part_10
 --echo #  4.4 ALTER ... REBUILD PARTITION part_1,part_1,part_1;
 let $alter= ALTER TABLE t1 REBUILD PARTITION part_1,part_1,part_1;
 --source suite/parts/inc/partition_alter_41.inc
+--echo #  4.5 ALTER ... REBUILD PARTITION ALL;
+let $alter= ALTER TABLE t1 REBUILD PARTITION ALL;
+--source suite/parts/inc/partition_alter_41.inc
 
 --echo #------------------------------------------------------------------------
 --echo #  5   ALTER ... REPAIR PARTITION
@@ -95,6 +107,9 @@ let $alter= ALTER TABLE t1 REPAIR PARTITION part_1,part_2,part_5,part_6,part_10;
 --echo #  5.4 ALTER ... REPAIR PARTITION part_1,part_1,part_1;
 let $alter= ALTER TABLE t1 REPAIR PARTITION part_1,part_1,part_1;
 --source suite/parts/inc/partition_alter_41.inc
+--echo #  5.5 ALTER ... REPAIR PARTITION ALL;
+let $alter= ALTER TABLE t1 REPAIR PARTITION ALL;
+--source suite/parts/inc/partition_alter_41.inc
 
 --echo #------------------------------------------------------------------------
 --echo #  6   ALTER ... REMOVE PARTITIONING

mysql-test/suite/rpl/r/rpl_failed_optimize.result

@@ -9,6 +9,7 @@ BEGIN;
 INSERT INTO t1 VALUES (1);
 OPTIMIZE TABLE t1;
 Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test.t1	optimize	error	Lock wait timeout exceeded; try restarting transaction
 test.t1	optimize	status	Operation failed
 Warnings:

mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result

@@ -570,6 +570,7 @@ test_rpl.t1	1837058639
 ******************** OPTIMIZE TABLE ********************
 OPTIMIZE TABLE t1;
 Table	Op	Msg_type	Msg_text
+test_rpl.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
 test_rpl.t1	optimize	status	OK
 
 ******************** REPAIR TABLE ********************

mysql-test/t/partition.test

@@ -1333,11 +1333,9 @@ SHOW TABLE STATUS;
 DELETE from t1 where a = 1;
 --replace_column 9 0 12 NULL 13 NULL 14 NULL
 SHOW TABLE STATUS;
-# restore this after WL#4176 is completed
--- error ER_CHECK_NOT_IMPLEMENTED
 ALTER TABLE t1 OPTIMIZE PARTITION p0;
-#--replace_column 12 NULL 13 NULL 14 NULL
-#SHOW TABLE STATUS;
+--replace_column 12 NULL 13 NULL 14 NULL
+SHOW TABLE STATUS;
 DROP TABLE t1;
 
 #
@@ -1672,13 +1670,9 @@ PARTITION BY RANGE (a) (
 ALTER TABLE t1 OPTIMIZE PARTITION p1 EXTENDED;
 --error ER_PARSE_ERROR
 ALTER TABLE t1 ANALYZE PARTITION p1 EXTENDED;
---error ER_CHECK_NOT_IMPLEMENTED
 ALTER TABLE t1 ANALYZE PARTITION p1;
---error ER_CHECK_NOT_IMPLEMENTED
 ALTER TABLE t1 CHECK PARTITION p1;
---error ER_CHECK_NOT_IMPLEMENTED
 ALTER TABLE t1 REPAIR PARTITION p1;
---error ER_CHECK_NOT_IMPLEMENTED
 ALTER TABLE t1 OPTIMIZE PARTITION p1;
 DROP TABLE t1;
 

sql/ha_partition.h

@@ -932,10 +932,6 @@ class ha_partition :public handler
     virtual int analyze(THD* thd, HA_CHECK_OPT *check_opt);
     virtual int check(THD* thd, HA_CHECK_OPT *check_opt);
     virtual int repair(THD* thd, HA_CHECK_OPT *check_opt);
-    virtual int optimize_partitions(THD *thd);
-    virtual int analyze_partitions(THD *thd);
-    virtual int check_partitions(THD *thd);
-    virtual int repair_partitions(THD *thd);
 
     private:
     int handle_opt_partitions(THD *thd, HA_CHECK_OPT *check_opt,

sql/handler.cc

@@ -3284,66 +3284,6 @@ handler::ha_rename_partitions(const char *path)
 }
 
 
-/**
-  Optimize partitions: public interface.
-
-  @sa handler::optimize_partitions()
-*/
-
-int
-handler::ha_optimize_partitions(THD *thd)
-{
-  mark_trx_read_write();
-
-  return optimize_partitions(thd);
-}
-
-
-/**
-  Analyze partitions: public interface.
-
-  @sa handler::analyze_partitions()
-*/
-
-int
-handler::ha_analyze_partitions(THD *thd)
-{
-  mark_trx_read_write();
-
-  return analyze_partitions(thd);
-}
-
-
-/**
-  Check partitions: public interface.
-
-  @sa handler::check_partitions()
-*/
-
-int
-handler::ha_check_partitions(THD *thd)
-{
-  mark_trx_read_write();
-
-  return check_partitions(thd);
-}
-
-
-/**
-  Repair partitions: public interface.
-
-  @sa handler::repair_partitions()
-*/
-
-int
-handler::ha_repair_partitions(THD *thd)
-{
-  mark_trx_read_write();
-
-  return repair_partitions(thd);
-}
-
-
 /**
   Tell the storage engine that it is allowed to "disable transaction" in the
   handler. It is a hint that ACID is not required - it is used in NDB for

sql/handler.h

@@ -1247,10 +1247,6 @@ class handler :public Sql_alloc
                            size_t pack_frm_len);
   int ha_drop_partitions(const char *path);
   int ha_rename_partitions(const char *path);
-  int ha_optimize_partitions(THD *thd);
-  int ha_analyze_partitions(THD *thd);
-  int ha_check_partitions(THD *thd);
-  int ha_repair_partitions(THD *thd);
 
   void adjust_next_insert_id_after_explicit_value(ulonglong nr);
   int update_auto_increment();
@@ -1911,14 +1907,6 @@ class handler :public Sql_alloc
   { return HA_ERR_WRONG_COMMAND; }
   virtual int rename_partitions(const char *path)
   { return HA_ERR_WRONG_COMMAND; }
-  virtual int optimize_partitions(THD *thd)
-  { return HA_ERR_WRONG_COMMAND; }
-  virtual int analyze_partitions(THD *thd)
-  { return HA_ERR_WRONG_COMMAND; }
-  virtual int check_partitions(THD *thd)
-  { return HA_ERR_WRONG_COMMAND; }
-  virtual int repair_partitions(THD *thd)
-  { return HA_ERR_WRONG_COMMAND; }
 };
 
 

sql/mysql_priv.h

@@ -1571,6 +1571,8 @@ uint fast_alter_partition_table(THD *thd, TABLE *table,
                                 char *db,
                                 const char *table_name,
                                 uint fast_alter_partition);
+uint set_part_state(Alter_info *alter_info, partition_info *tab_part_info,
+                    enum partition_state part_state);
 uint prep_alter_part_table(THD *thd, TABLE *table, Alter_info *alter_info,
                            HA_CREATE_INFO *create_info,
                            handlerton *old_db_type,

sql/protocol.cc

@@ -788,6 +788,9 @@ bool Protocol_text::store(const char *from, size_t length,
 {
   CHARSET_INFO *tocs= this->thd->variables.character_set_results;
 #ifndef DBUG_OFF
+  DBUG_PRINT("info", ("Protocol_text::store field %u (%u): %s", field_pos,
+                      field_count, from));
+  DBUG_ASSERT(field_pos < field_count);
   DBUG_ASSERT(field_types == 0 ||
 	      field_types[field_pos] == MYSQL_TYPE_DECIMAL ||
               field_types[field_pos] == MYSQL_TYPE_BIT ||

sql/sql_partition.cc

@@ -4079,6 +4079,38 @@ static bool check_native_partitioned(HA_CREATE_INFO *create_info,bool *ret_val,
 }
 
 
+/*
+  Sets which partitions to be used in the command
+*/
+uint set_part_state(Alter_info *alter_info, partition_info *tab_part_info,
+               enum partition_state part_state)
+{
+  uint part_count= 0;
+  uint no_parts_found= 0;
+  List_iterator<partition_element> part_it(tab_part_info->partitions);
+
+  do
+  {
+    partition_element *part_elem= part_it++;
+    if ((alter_info->flags & ALTER_ALL_PARTITION) ||
+         (is_name_in_list(part_elem->partition_name,
+          alter_info->partition_names)))
+    {
+      /*
+        Mark the partition.
+        I.e mark the partition as a partition to be "changed" by
+        analyzing/optimizing/rebuilding/checking/repairing
+      */
+      no_parts_found++;
+      part_elem->part_state= part_state;
+      DBUG_PRINT("info", ("Setting part_state to %u for partition %s",
+                          part_state, part_elem->partition_name));
+    }
+  } while (++part_count < tab_part_info->no_parts);
+  return no_parts_found;
+}
+
+
 /*
   Prepare for ALTER TABLE of partition structure
 
@@ -4534,26 +4566,9 @@ that are reorganised.
              (alter_info->flags & ALTER_REPAIR_PARTITION) ||
              (alter_info->flags & ALTER_REBUILD_PARTITION))
     {
+      uint no_parts_found;
       uint no_parts_opt= alter_info->partition_names.elements;
-      uint part_count= 0;
-      uint no_parts_found= 0;
-      List_iterator<partition_element> part_it(tab_part_info->partitions);
-
-      do
-      {
-        partition_element *part_elem= part_it++;
-        if ((alter_info->flags & ALTER_ALL_PARTITION) ||
-            (is_name_in_list(part_elem->partition_name,
-                             alter_info->partition_names)))
-        {
-          /*
-            Mark the partition as a partition to be "changed" by
-            analyzing/optimizing/rebuilding/checking/repairing
-          */
-          no_parts_found++;
-          part_elem->part_state= PART_CHANGED;
-        }
-      } while (++part_count < tab_part_info->no_parts);
+      no_parts_found= set_part_state(alter_info, tab_part_info, PART_CHANGED);
       if (no_parts_found != no_parts_opt &&
           (!(alter_info->flags & ALTER_ALL_PARTITION)))
       {
@@ -6026,48 +6041,7 @@ uint fast_alter_partition_table(THD *thd, TABLE *table,
   lpt->pack_frm_len= 0;
   thd->work_part_info= part_info;
 
-  if (alter_info->flags & ALTER_OPTIMIZE_PARTITION ||
-      alter_info->flags & ALTER_ANALYZE_PARTITION ||
-      alter_info->flags & ALTER_CHECK_PARTITION ||
-      alter_info->flags & ALTER_REPAIR_PARTITION)
-  {
-    /*
-      In this case the user has specified that he wants a set of partitions
-      to be optimised and the partition engine can handle optimising
-      partitions natively without requiring a full rebuild of the
-      partitions.
-
-      In this case it is enough to call optimise_partitions, there is no
-      need to change frm files or anything else.
-    */
-    int error;
-    written_bin_log= FALSE;
-    if (((alter_info->flags & ALTER_OPTIMIZE_PARTITION) &&
-         (error= table->file->ha_optimize_partitions(thd))) ||
-        ((alter_info->flags & ALTER_ANALYZE_PARTITION) &&
-         (error= table->file->ha_analyze_partitions(thd))) ||
-        ((alter_info->flags & ALTER_CHECK_PARTITION) &&
-         (error= table->file->ha_check_partitions(thd))) ||
-        ((alter_info->flags & ALTER_REPAIR_PARTITION) &&
-         (error= table->file->ha_repair_partitions(thd))))
-    {
-      if (error == HA_ADMIN_NOT_IMPLEMENTED) {
-        if (alter_info->flags & ALTER_OPTIMIZE_PARTITION)
-          my_error(ER_CHECK_NOT_IMPLEMENTED, MYF(0), "optimize partition");
-        else if (alter_info->flags & ALTER_ANALYZE_PARTITION)
-          my_error(ER_CHECK_NOT_IMPLEMENTED, MYF(0), "analyze partition");
-        else if (alter_info->flags & ALTER_CHECK_PARTITION)
-          my_error(ER_CHECK_NOT_IMPLEMENTED, MYF(0), "check partition");
-        else if (alter_info->flags & ALTER_REPAIR_PARTITION)
-          my_error(ER_CHECK_NOT_IMPLEMENTED, MYF(0), "repair partition");
-        else
-          table->file->print_error(error, MYF(0));
-      } else
-        table->file->print_error(error, MYF(0));
-      goto err;
-    }
-  }
-  else if (fast_alter_partition & HA_PARTITION_ONE_PHASE)
+  if (fast_alter_partition & HA_PARTITION_ONE_PHASE)
   {
     /*
       In the case where the engine supports one phase online partition

sql/sql_table.cc

@@ -4194,6 +4194,46 @@ static bool mysql_admin_table(THD* thd, TABLE_LIST* tables,
       table->next_global= save_next_global;
       table->next_local= save_next_local;
       thd->open_options&= ~extra_open_options;
+#ifdef WITH_PARTITION_STORAGE_ENGINE
+      if (table->table && table->table->part_info)
+      {
+        /*
+          Set up which partitions that should be processed
+          if ALTER TABLE t ANALYZE/CHECK/OPTIMIZE/REPAIR PARTITION ..
+        */
+        Alter_info *alter_info= &lex->alter_info;
+
+        if (alter_info->flags & ALTER_ANALYZE_PARTITION ||
+            alter_info->flags & ALTER_CHECK_PARTITION ||
+            alter_info->flags & ALTER_OPTIMIZE_PARTITION ||
+            alter_info->flags & ALTER_REPAIR_PARTITION)
+        {
+          uint no_parts_found;
+          uint no_parts_opt= alter_info->partition_names.elements;
+          no_parts_found= set_part_state(alter_info, table->table->part_info,
+                                         PART_CHANGED);
+          if (no_parts_found != no_parts_opt &&
+              (!(alter_info->flags & ALTER_ALL_PARTITION)))
+          {
+            char buff[FN_REFLEN + MYSQL_ERRMSG_SIZE];
+            uint length;
+            DBUG_PRINT("admin", ("sending non existent partition error"));
+            protocol->prepare_for_resend();
+            protocol->store(table_name, system_charset_info);
+            protocol->store(operator_name, system_charset_info);
+            protocol->store(STRING_WITH_LEN("error"), system_charset_info);
+            length= my_snprintf(buff, sizeof(buff),
+                                ER(ER_DROP_PARTITION_NON_EXISTENT),
+                                table_name);
+            protocol->store(buff, length, system_charset_info);
+            if(protocol->write())
+              goto err;
+            my_eof(thd);
+            goto err;
+          }
+        }
+      }
+#endif
     }
     DBUG_PRINT("admin", ("table: 0x%lx", (long) table->table));
 
@@ -4428,9 +4468,17 @@ static bool mysql_admin_table(THD* thd, TABLE_LIST* tables,
         This is currently used only by InnoDB. ha_innobase::optimize() answers
         "try with alter", so here we close the table, do an ALTER TABLE,
         reopen the table and do ha_innobase::analyze() on it.
+        We have to end the row, so analyze could return more rows.
       */
+      protocol->store(STRING_WITH_LEN("note"), system_charset_info);
+      protocol->store(STRING_WITH_LEN(
+          "Table does not support optimize, doing recreate + analyze instead"),
+                      system_charset_info);
+      if (protocol->write())
+        goto err;
       ha_autocommit_or_rollback(thd, 0);
       close_thread_tables(thd);
+      DBUG_PRINT("info", ("HA_ADMIN_TRY_ALTER, trying analyze..."));
       TABLE_LIST *save_next_local= table->next_local,
                  *save_next_global= table->next_global;
       table->next_local= table->next_global= 0;
@@ -4453,6 +4501,10 @@ static bool mysql_admin_table(THD* thd, TABLE_LIST* tables,
             ((result_code= table->table->file->ha_analyze(thd, check_opt)) > 0))
           result_code= 0; // analyze went ok
       }
+      /* Start a new row for the final status row */
+      protocol->prepare_for_resend();
+      protocol->store(table_name, system_charset_info);
+      protocol->store(operator_name, system_charset_info);
       if (result_code) // either mysql_recreate_table or analyze failed
       {
         DBUG_ASSERT(thd->is_error());
@@ -4468,7 +4520,8 @@ static bool mysql_admin_table(THD* thd, TABLE_LIST* tables,
             /* Hijack the row already in-progress. */
             protocol->store(STRING_WITH_LEN("error"), system_charset_info);
             protocol->store(err_msg, system_charset_info);
-            (void)protocol->write();
+            if (protocol->write())
+              goto err;
             /* Start off another row for HA_ADMIN_FAILED */
             protocol->prepare_for_resend();
             protocol->store(table_name, system_charset_info);

sql/sql_yacc.yy

@@ -5543,6 +5543,7 @@ alter_commands:
           all_or_alt_part_name_list
           {
             LEX *lex= Lex;
+            lex->sql_command = SQLCOM_OPTIMIZE;
             lex->alter_info.flags|= ALTER_OPTIMIZE_PARTITION;
             lex->no_write_to_binlog= $3;
             lex->check_opt.init();
@@ -5552,6 +5553,7 @@ alter_commands:
           all_or_alt_part_name_list
           {
             LEX *lex= Lex;
+            lex->sql_command = SQLCOM_ANALYZE;
             lex->alter_info.flags|= ALTER_ANALYZE_PARTITION;
             lex->no_write_to_binlog= $3;
             lex->check_opt.init();
@@ -5559,6 +5561,7 @@ alter_commands:
         | CHECK_SYM PARTITION_SYM all_or_alt_part_name_list
           {
             LEX *lex= Lex;
+            lex->sql_command = SQLCOM_CHECK;
             lex->alter_info.flags|= ALTER_CHECK_PARTITION;
             lex->check_opt.init();
           }
@@ -5567,6 +5570,7 @@ alter_commands:
           all_or_alt_part_name_list
           {
             LEX *lex= Lex;
+            lex->sql_command = SQLCOM_REPAIR;
             lex->alter_info.flags|= ALTER_REPAIR_PARTITION;
             lex->no_write_to_binlog= $3;
             lex->check_opt.init();
@@ -6009,6 +6013,7 @@ repair:
             lex->sql_command = SQLCOM_REPAIR;
             lex->no_write_to_binlog= $2;
             lex->check_opt.init();
+            lex->alter_info.reset();
           }
           table_list opt_mi_repair_type
           {}
@@ -6037,6 +6042,7 @@ analyze:
             lex->sql_command = SQLCOM_ANALYZE;
             lex->no_write_to_binlog= $2;
             lex->check_opt.init();
+            lex->alter_info.reset();
           }
           table_list
           {}
@@ -6062,6 +6068,7 @@ check:
             }
             lex->sql_command = SQLCOM_CHECK;
             lex->check_opt.init();
+            lex->alter_info.reset();
           }
           table_list opt_mi_check_type
           {}
@@ -6093,6 +6100,7 @@ optimize:
             lex->sql_command = SQLCOM_OPTIMIZE;
             lex->no_write_to_binlog= $2;
             lex->check_opt.init();
+            lex->alter_info.reset();
           }
           table_list
           {}

storage/myisam/mi_check.c

@@ -1338,7 +1338,7 @@ int chk_data_link(MI_CHECK *param, MI_INFO *info,int extend)
   if (splits != info->s->state.split)
   {
     mi_check_print_warning(param,
-			   "Found %10s parts                Should be: %s parts",
+			   "Found %10s key parts. Should be: %s",
 			   llstr(splits,llbuff),
 			   llstr(info->s->state.split,llbuff2));
   }