Merge branch '10.0' into bb-10.0-serg

mysql-test/r/sp.result

@@ -7858,3 +7858,56 @@ v1
 DROP PROCEDURE p1;
 DROP TABLE t1;
 # End of 5.5 test
+#
+#  MDEV-7040: Crash in field_conv, memcpy_field_possible, part#2
+#
+create table t1 (
+col1 bigint(20),
+col2 char(1),
+col3 char(2)
+);
+insert into t1 values (1,'a','a'), (2,'b','b');
+create table t2 as select * from t1;
+create table t3 as select * from t1;
+create table t4 as select * from t1;
+create table t5 as select * from t1;
+create table t6 as select * from t1;
+flush tables;
+CREATE PROCEDURE p1()
+begin
+DECLARE _var1 bigint(20) UNSIGNED;
+DECLARE _var2 CHAR(1) DEFAULT NULL;
+DECLARE _var3 CHAR(1) DEFAULT NULL;
+DECLARE _done BOOLEAN DEFAULT 0;
+declare cur1 cursor for
+select col1, col2, col3 
+from t1 
+where 
+col1 in (select t2.col1 from t2 where t2.col2=t1.col2) or
+col2 in (select t3.col3 from t3 where t3.col3=t1.col2) ;
+DECLARE CONTINUE HANDLER FOR NOT FOUND SET _done = 1;
+OPEN cur1;
+set _var1 = (select _var1 from t4 limit 1);
+set _var1 = (select _var1 from t5 limit 1);
+set _var1 = (select _var1 from t6 limit 1);
+label1:
+LOOP
+SET _done = 0;
+FETCH cur1 INTO _var1, _var2, _var3;
+IF _done THEN
+LEAVE label1;
+END IF;
+END LOOP label1;
+CLOSE cur1;
+end|
+set @tmp_toc= @@table_open_cache;
+set @tmp_tdc= @@table_definition_cache;
+set global table_open_cache=1;
+set global table_definition_cache=1;
+Warnings:
+Warning	1292	Truncated incorrect table_definition_cache value: '1'
+call p1();
+set global table_open_cache= @tmp_toc;
+set global table_definition_cache= @tmp_tdc;
+drop procedure p1;
+drop table t1,t2,t3,t4,t5,t6;

mysql-test/r/subselect_mat.result

@@ -2215,6 +2215,24 @@ Handler_read_rnd_next	6003
 Handler_tmp_write	2000
 Handler_write	1000
 drop table t0,t1,t2,t3;
+#
+# MDEV-7971: Assertion `name != __null' failed in ACL_internal_schema_registry::lookup 
+#            on 2nd execution os PS with multi-table update
+#
+CREATE TABLE t1 (f1 INT);
+INSERT INTO t1 VALUES (1),(2);
+CREATE TABLE t2 (f2 INT);
+INSERT INTO t2 VALUES (3),(4);
+CREATE TABLE t3 (f3 INT);
+INSERT INTO t3 VALUES (5),(6);
+PREPARE stmt FROM '
+  UPDATE t1, t2 
+  SET f1 = 5
+  WHERE 8 IN ( SELECT MIN(f3) FROM t3 )
+';
+EXECUTE stmt;
+EXECUTE stmt;
+DROP TABLE t1,t2,t3;
 set @subselect_mat_test_optimizer_switch_value=null;
 set @@optimizer_switch='materialization=on,in_to_exists=off,semijoin=off';
 set optimizer_switch='mrr=on,mrr_sort_keys=on,index_condition_pushdown=on';

mysql-test/r/subselect_sj_mat.result

@@ -2255,3 +2255,21 @@ Handler_read_rnd_next	6003
 Handler_tmp_write	2000
 Handler_write	1000
 drop table t0,t1,t2,t3;
+#
+# MDEV-7971: Assertion `name != __null' failed in ACL_internal_schema_registry::lookup 
+#            on 2nd execution os PS with multi-table update
+#
+CREATE TABLE t1 (f1 INT);
+INSERT INTO t1 VALUES (1),(2);
+CREATE TABLE t2 (f2 INT);
+INSERT INTO t2 VALUES (3),(4);
+CREATE TABLE t3 (f3 INT);
+INSERT INTO t3 VALUES (5),(6);
+PREPARE stmt FROM '
+  UPDATE t1, t2 
+  SET f1 = 5
+  WHERE 8 IN ( SELECT MIN(f3) FROM t3 )
+';
+EXECUTE stmt;
+EXECUTE stmt;
+DROP TABLE t1,t2,t3;

mysql-test/suite/rpl/r/rpl_parallel.result

@@ -1649,6 +1649,46 @@ include/stop_slave.inc
 SET GLOBAL debug_dbug= @old_debg;
 SET GLOBAL max_relay_log_size= @old_max;
 include/start_slave.inc
+*** MDEV-8302: Duplicate key with parallel replication ***
+include/stop_slave.inc
+/* Inject a small sleep which makes the race easier to hit. */
+SET @old_dbug=@@GLOBAL.debug_dbug;
+SET GLOBAL debug_dbug="+d,inject_mdev8302";
+INSERT INTO t7 VALUES (100,1), (101,2), (102,3), (103,4), (104,5);
+SET @old_dbug= @@SESSION.debug_dbug;
+SET @commit_id= 20000;
+SET SESSION debug_dbug="+d,binlog_force_commit_id";
+SET SESSION debug_dbug=@old_dbug;
+SELECT * FROM t7 ORDER BY a;
+a	b
+1	1
+2	2
+3	86
+4	4
+5	5
+100	5
+101	1
+102	2
+103	3
+104	4
+include/save_master_gtid.inc
+include/start_slave.inc
+include/sync_with_master_gtid.inc
+SELECT * FROM t7 ORDER BY a;
+a	b
+1	1
+2	2
+3	86
+4	4
+5	5
+100	5
+101	1
+102	2
+103	3
+104	4
+include/stop_slave.inc
+SET GLOBAL debug_dbug=@old_dbug;
+include/start_slave.inc
 include/stop_slave.inc
 SET GLOBAL slave_parallel_threads=@old_parallel_threads;
 include/start_slave.inc

mysql-test/suite/rpl/t/rpl_parallel.test

@@ -2314,6 +2314,60 @@ SET GLOBAL max_relay_log_size= @old_max;
 --source include/start_slave.inc
 
 
+--echo *** MDEV-8302: Duplicate key with parallel replication ***
+
+--connection server_2
+--source include/stop_slave.inc
+/* Inject a small sleep which makes the race easier to hit. */
+SET @old_dbug=@@GLOBAL.debug_dbug;
+SET GLOBAL debug_dbug="+d,inject_mdev8302";
+
+
+--connection server_1
+INSERT INTO t7 VALUES (100,1), (101,2), (102,3), (103,4), (104,5);
+
+# Artificially create a bunch of group commits with conflicting transactions.
+# The bug happened when T1 and T2 was in one group commit, and T3 was in the
+# following group commit. T2 is a DELETE of a row with same primary key as a
+# row that T3 inserts. T1 and T2 can conflict, causing T2 to be deadlock
+# killed after starting to commit. The bug was that T2 could roll back before
+# doing unmark_start_commit(); this could allow T3 to run before the retry
+# of T2, causing duplicate key violation.
+
+SET @old_dbug= @@SESSION.debug_dbug;
+SET @commit_id= 20000;
+SET SESSION debug_dbug="+d,binlog_force_commit_id";
+
+--let $n = 100
+--disable_query_log
+while ($n)
+{
+  eval UPDATE t7 SET b=b+1 WHERE a=100+($n MOD 5);
+  eval DELETE FROM t7 WHERE a=100+($n MOD 5);
+
+  SET @commit_id = @commit_id + 1;
+  eval INSERT INTO t7 VALUES (100+($n MOD 5), $n);
+  SET @commit_id = @commit_id + 1;
+  dec $n;
+}
+--enable_query_log
+SET SESSION debug_dbug=@old_dbug;
+
+
+SELECT * FROM t7 ORDER BY a;
+--source include/save_master_gtid.inc
+
+
+--connection server_2
+--source include/start_slave.inc
+--source include/sync_with_master_gtid.inc
+SELECT * FROM t7 ORDER BY a;
+
+--source include/stop_slave.inc
+SET GLOBAL debug_dbug=@old_dbug;
+--source include/start_slave.inc
+
+
 
 # Clean up.
 --connection server_2

mysql-test/t/sp.test

@@ -9303,3 +9303,71 @@ DROP PROCEDURE p1;
 DROP TABLE t1;
 
 --echo # End of 5.5 test
+
+--echo #
+--echo #  MDEV-7040: Crash in field_conv, memcpy_field_possible, part#2
+--echo #
+create table t1 (
+  col1 bigint(20),
+  col2 char(1),
+  col3 char(2)
+);
+insert into t1 values (1,'a','a'), (2,'b','b');
+
+create table t2 as select * from t1;
+create table t3 as select * from t1;
+create table t4 as select * from t1;
+create table t5 as select * from t1;
+create table t6 as select * from t1;
+
+flush tables;
+
+DELIMITER |;
+
+CREATE PROCEDURE p1()
+begin
+   DECLARE _var1 bigint(20) UNSIGNED;
+   DECLARE _var2 CHAR(1) DEFAULT NULL;
+   DECLARE _var3 CHAR(1) DEFAULT NULL;
+
+   DECLARE _done BOOLEAN DEFAULT 0;
+
+   declare cur1 cursor for
+   select col1, col2, col3 
+   from t1 
+   where 
+     col1 in (select t2.col1 from t2 where t2.col2=t1.col2) or
+     col2 in (select t3.col3 from t3 where t3.col3=t1.col2) ;
+   
+   DECLARE CONTINUE HANDLER FOR NOT FOUND SET _done = 1;
+
+   OPEN cur1;
+   
+   set _var1 = (select _var1 from t4 limit 1);
+   set _var1 = (select _var1 from t5 limit 1);
+   set _var1 = (select _var1 from t6 limit 1);
+label1:
+   LOOP
+     SET _done = 0;
+     FETCH cur1 INTO _var1, _var2, _var3;
+     IF _done THEN
+         LEAVE label1;
+     END IF;
+   END LOOP label1;
+   CLOSE cur1;
+end|
+DELIMITER ;|
+
+set @tmp_toc= @@table_open_cache;
+set @tmp_tdc= @@table_definition_cache;
+
+set global table_open_cache=1;
+set global table_definition_cache=1;
+call p1();
+
+set global table_open_cache= @tmp_toc;
+set global table_definition_cache= @tmp_tdc;
+drop procedure p1;
+
+drop table t1,t2,t3,t4,t5,t6;
+

mysql-test/t/subselect_sj_mat.test

@@ -1900,3 +1900,28 @@ select * from t1 where (a,b) in (select max(a),b from t2 group by b);
 show status where Variable_name like 'Handler_read%' or  Variable_name like 'Handler_%write%';
 
 drop table t0,t1,t2,t3;
+
+--echo #
+--echo # MDEV-7971: Assertion `name != __null' failed in ACL_internal_schema_registry::lookup 
+--echo #            on 2nd execution os PS with multi-table update
+--echo #
+CREATE TABLE t1 (f1 INT);
+INSERT INTO t1 VALUES (1),(2);
+
+CREATE TABLE t2 (f2 INT);
+INSERT INTO t2 VALUES (3),(4);
+
+CREATE TABLE t3 (f3 INT);
+INSERT INTO t3 VALUES (5),(6);
+
+PREPARE stmt FROM '
+  UPDATE t1, t2 
+  SET f1 = 5
+  WHERE 8 IN ( SELECT MIN(f3) FROM t3 )
+';
+
+EXECUTE stmt;
+EXECUTE stmt;
+
+DROP TABLE t1,t2,t3;
+

sql/handler.cc

@@ -1582,6 +1582,26 @@ int ha_rollback_trans(THD *thd, bool all)
   DBUG_ASSERT(thd->transaction.stmt.ha_list == NULL ||
               trans == &thd->transaction.stmt);
 
+#ifdef HAVE_REPLICATION
+  if (is_real_trans)
+  {
+    /*
+      In parallel replication, if we need to rollback during commit, we must
+      first inform following transactions that we are going to abort our commit
+      attempt. Otherwise those following transactions can run too early, and
+      possibly cause replication to fail. See comments in retry_event_group().
+
+      There were several bugs with this in the past that were very hard to
+      track down (MDEV-7458, MDEV-8302). So we add here an assertion for
+      rollback without signalling following transactions. And in release
+      builds, we explicitly do the signalling before rolling back.
+    */
+    DBUG_ASSERT(!(thd->rgi_slave && thd->rgi_slave->did_mark_start_commit));
+    if (thd->rgi_slave && thd->rgi_slave->did_mark_start_commit)
+      thd->rgi_slave->unmark_start_commit();
+  }
+#endif
+
   if (thd->in_sub_stmt)
   {
     DBUG_ASSERT(0);

sql/log_event.cc

@@ -4277,7 +4277,6 @@ int Query_log_event::do_apply_event(rpl_group_info *rgi,
                           "mysql", rpl_gtid_slave_state_table_name.str,
                           errcode,
                           thd->get_stmt_da()->message());
-            trans_rollback(thd);
             sub_id= 0;
             thd->is_slave_error= 1;
             goto end;
@@ -7367,7 +7366,6 @@ int Xid_log_event::do_apply_event(rpl_group_info *rgi)
                     "%s.%s: %d: %s",
                     "mysql", rpl_gtid_slave_state_table_name.str, ec,
                     thd->get_stmt_da()->message());
-      trans_rollback(thd);
       thd->is_slave_error= 1;
       return err;
     }

sql/rpl_parallel.cc

@@ -226,6 +226,11 @@ static void
 signal_error_to_sql_driver_thread(THD *thd, rpl_group_info *rgi, int err)
 {
   rgi->worker_error= err;
+  /*
+    In case we get an error during commit, inform following transactions that
+    we aborted our commit.
+  */
+  rgi->unmark_start_commit();
   rgi->cleanup_context(thd, true);
   rgi->rli->abort_slave= true;
   rgi->rli->stop_for_until= false;
@@ -370,6 +375,7 @@ retry_event_group(rpl_group_info *rgi, rpl_parallel_thread *rpt,
     transaction we deadlocked with will not signal that it started to commit
     until after the unmark.
   */
+  DBUG_EXECUTE_IF("inject_mdev8302", { my_sleep(20000);});
   rgi->unmark_start_commit();
   DEBUG_SYNC(thd, "rpl_parallel_retry_after_unmark");
 
@@ -884,9 +890,24 @@ handle_rpl_parallel_thread(void *arg)
       group_ending= is_group_ending(qev->ev, event_type);
       if (group_ending && likely(!rgi->worker_error))
       {
-        DEBUG_SYNC(thd, "rpl_parallel_before_mark_start_commit");
-        rgi->mark_start_commit();
-        DEBUG_SYNC(thd, "rpl_parallel_after_mark_start_commit");
+        /*
+          Do an extra check for (deadlock) kill here. This helps prevent a
+          lingering deadlock kill that occured during normal DML processing to
+          propagate past the mark_start_commit(). If we detect a deadlock only
+          after mark_start_commit(), we have to unmark, which has at least a
+          theoretical possibility of leaving a window where it looks like all
+          transactions in a GCO have started committing, while in fact one
+          will need to rollback and retry. This is not supposed to be possible
+          (since there is a deadlock, at least one transaction should be
+          blocked from reaching commit), but this seems a fragile ensurance,
+          and there were historically a number of subtle bugs in this area.
+        */
+        if (!thd->killed)
+        {
+          DEBUG_SYNC(thd, "rpl_parallel_before_mark_start_commit");
+          rgi->mark_start_commit();
+          DEBUG_SYNC(thd, "rpl_parallel_after_mark_start_commit");
+        }
       }
 
       /*
@@ -911,7 +932,17 @@ handle_rpl_parallel_thread(void *arg)
           });
         if (!err)
 #endif
-        err= rpt_handle_event(qev, rpt);
+        {
+          if (thd->check_killed())
+          {
+            thd->clear_error();
+            thd->get_stmt_da()->reset_diagnostics_area();
+            thd->send_kill_message();
+            err= 1;
+          }
+          else
+            err= rpt_handle_event(qev, rpt);
+        }
         delete_or_keep_event_post_apply(rgi, event_type, qev->ev);
         DBUG_EXECUTE_IF("rpl_parallel_simulate_temp_err_gtid_0_x_100",
                         err= dbug_simulate_tmp_error(rgi, thd););

sql/sql_cursor.cc

@@ -54,6 +54,8 @@ class Materialized_cursor: public Server_side_cursor
   virtual void fetch(ulong num_rows);
   virtual void close();
   virtual ~Materialized_cursor();
+
+  void on_table_fill_finished();
 };
 
 
@@ -74,6 +76,18 @@ class Select_materialize: public select_union
   Select_materialize(select_result *result_arg)
     :result(result_arg), materialized_cursor(0) {}
   virtual bool send_result_set_metadata(List<Item> &list, uint flags);
+  bool send_eof()
+  {
+    if (materialized_cursor)
+      materialized_cursor->on_table_fill_finished();
+    return false;
+  }
+
+  void abort_result_set()
+  {
+    if (materialized_cursor)
+      materialized_cursor->on_table_fill_finished();
+  }
 };
 
 
@@ -388,6 +402,29 @@ Materialized_cursor::~Materialized_cursor()
 }
 
 
+/*
+  @brief
+    Perform actions that are to be done when cursor materialization has
+    finished.
+
+  @detail
+    This function is called when "OPEN $cursor" has finished filling the
+    temporary table with rows that the cursor will return.
+
+    Temporary table has table->field->orig_table pointing at the tables
+    that are used in the cursor definition query. Pointers to these tables
+    will not be valid after the query finishes.  So, we do what is done for
+    regular tables: have orig_table point at the table that the fields belong
+    to.
+*/
+
+void Materialized_cursor::on_table_fill_finished()
+{
+  uint fields= table->s->fields;
+  for (uint i= 0; i < fields; i++)
+    table->field[i]->orig_table= table->field[i]->table;
+}
+
 /***************************************************************************
  Select_materialize
 ****************************************************************************/

sql/sql_parse.cc

@@ -7751,6 +7751,8 @@ bool multi_update_precheck(THD *thd, TABLE_LIST *tables)
   */
   for (table= tables; table; table= table->next_local)
   {
+    if (table->is_jtbm())
+      continue;
     if (table->derived)
       table->grant.privilege= SELECT_ACL;
     else if ((check_access(thd, UPDATE_ACL, table->db,

sql/sql_update.cc

@@ -1161,7 +1161,7 @@ bool unsafe_key_update(List<TABLE_LIST> leaves, table_map tables_for_update)
 
   while ((tl= it++))
   {
-    if (tl->table->map & tables_for_update)
+    if (!tl->is_jtbm() && (tl->table->map & tables_for_update))
     {
       TABLE *table1= tl->table;
       bool primkey_clustered= (table1->file->primary_key_is_clustered() &&
@@ -1178,6 +1178,8 @@ bool unsafe_key_update(List<TABLE_LIST> leaves, table_map tables_for_update)
       it2.rewind();
       while ((tl2= it2++))
       {
+        if (tl2->is_jtbm())
+          continue;
         /*
           Look at "next" tables only since all previous tables have
           already been checked
@@ -1409,6 +1411,9 @@ int mysql_multi_update_prepare(THD *thd)
   {
     TABLE *table= tl->table;
 
+    if (tl->is_jtbm())
+      continue;
+
     /* if table will be updated then check that it is unique */
     if (table->map & tables_for_update)
     {
@@ -1457,6 +1462,8 @@ int mysql_multi_update_prepare(THD *thd)
   for (tl= table_list; tl; tl= tl->next_local)
   {
     bool not_used= false;
+    if (tl->is_jtbm())
+      continue;
     if (multi_update_check_table_access(thd, tl, tables_for_update, &not_used))
       DBUG_RETURN(TRUE);
   }
@@ -1464,6 +1471,8 @@ int mysql_multi_update_prepare(THD *thd)
   /* check single table update for view compound from several tables */
   for (tl= table_list; tl; tl= tl->next_local)
   {
+    if (tl->is_jtbm())
+      continue;
     if (tl->is_merged_derived())
     {
       TABLE_LIST *for_update= 0;
@@ -1493,6 +1502,8 @@ int mysql_multi_update_prepare(THD *thd)
   ti.rewind();
   while ((tl= ti++))
   {
+    if (tl->is_jtbm())
+      continue;
     TABLE *table= tl->table;
     TABLE_LIST *tlist;
     if (!(tlist= tl->top_table())->derived)
@@ -1635,6 +1646,9 @@ int multi_update::prepare(List<Item> &not_used_values,
   */
   while ((table_ref= ti++))
   {
+    if (table_ref->is_jtbm())
+      continue;
+
     TABLE *table= table_ref->table;
     if (tables_to_update & table->map)
     {
@@ -1654,6 +1668,9 @@ int multi_update::prepare(List<Item> &not_used_values,
   ti.rewind();
   while ((table_ref= ti++))
   {
+    if (table_ref->is_jtbm())
+      continue;
+
     TABLE *table= table_ref->table;
     if (tables_to_update & table->map)
     {
@@ -1684,6 +1701,8 @@ int multi_update::prepare(List<Item> &not_used_values,
   while ((table_ref= ti++))
   {
     /* TODO: add support of view of join support */
+    if (table_ref->is_jtbm())
+      continue;
     TABLE *table=table_ref->table;
     leaf_table_count++;
     if (tables_to_update & table->map)