Skip to content

M
MariaDB
Commit 6d6b9ffe authored by Chad MILLER's avatar Chad MILLER
Browse files
Options

Bug#21579 - innodb_concurrent random failures with varying differences 

Due to unknown changes the test failed in some ways.

Fixed by checking the test case in detail, commenting the expected behavior,
and fixing error directives.

In the course of the analyze unneeded get_lock()/release_lock() use,
unneeded send/reap use, and unneeded sleeps were removed. The lock wait
timeout was reduced to 1 second, so that this is no big-test any more.

The test was split into two parts, one running the tests with
--innodb_locks_unsafe_for_binlog, the other part without.
The main part (include/concurrent.inc) conditionally expects
lock wait timeouts based on the value of the system variable
innodb_locks_unsafe_for_binlog.

The major part of the patch comes from Kristofer Pettersson.

(Chad queues this patch on demand by Trudy/Davi.)
parent 224ce48a
Hide whitespace changes
Inline Side-by-side
Showing with 1719 additions and 389 deletions
mysql-test/include/concurrent.inc
View file @ 6d6b9ffe
...@@ -4,354 +4,641 @@ ...@@ -4,354 +4,641 @@
# Bug#3300 # Bug#3300
# Designed and tested by Sinisa Milivojevic, sinisa@mysql.com # Designed and tested by Sinisa Milivojevic, sinisa@mysql.com
# #
# two non-interfering UPDATE's not changing result set # These variables have to be set before sourcing this script:
# # TRANSACTION ISOLATION LEVEL REPEATABLE READ
# The variable # innodb_locks_unsafe_for_binlog 0 (default) or 1 (by
# $engine_type -- storage engine to be tested # --innodb_locks_unsafe_for_binlog)
# has to be set before sourcing this script. # $engine_type storage engine to be tested
# #
# Last update: # Last update:
# 2006-08-02 ML test refactored # 2006-08-02 ML test refactored
# old name was t/innodb_concurrent.test # old name was t/innodb_concurrent.test
# main code went into include/concurrent.inc # main code went into include/concurrent.inc
# 2008-06-03 KP test refactored; removed name locks, added comments.
# renamed wrapper t/concurrent_innodb.test ->
# t/concurrent_innodb_unsafelog.test
# new wrapper t/concurrent_innodb_safelog.test
# #
connection default; connection default;
eval SET SESSION STORAGE_ENGINE = $engine_type;
#
# Show prerequisites for this test.
#
SELECT @@global.tx_isolation;
SELECT @@global.innodb_locks_unsafe_for_binlog;
#
# When innodb_locks_unsafe_for_binlog is not set (zero), which is the
# default, InnoDB takes "next-key locks"/"gap locks". This means it
# locks the gap before the keys that it accessed to find the rows to
# use for a statement. In this case we have to expect some more lock
# wait timeouts in the tests below as if innodb_locks_unsafe_for_binlog
# is set (non-zero). In the latter case no "next-key locks"/"gap locks"
# are taken and locks on keys that do not match the WHERE conditon are
# released. Hence less lock collisions occur.
# We use the variable $keep_locks to set the expectations for
# lock wait timeouts accordingly.
#
let $keep_locks= `SELECT NOT @@global.innodb_locks_unsafe_for_binlog`;
--echo # keep_locks == $keep_locks
#
# Set up privileges and remove user level locks, if exist.
#
GRANT USAGE ON test.* TO mysqltest@localhost;
#
# Preparatory cleanup.
#
DO release_lock("hello");
DO release_lock("hello2");
--disable_warnings --disable_warnings
drop table if exists t1; drop table if exists t1;
--enable_warnings --enable_warnings
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
connect (thread1, localhost, mysqltest,,);
connection thread1; --echo
eval SET SESSION STORAGE_ENGINE = $engine_type; --echo **
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); --echo ** two UPDATE's running and both changing distinct result sets
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); --echo **
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); --echo ** connection thread1
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd"); connect (thread1, localhost, mysqltest,,);
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee"); connection thread1;
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff"); --echo ** Set up table
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg"); eval SET SESSION STORAGE_ENGINE = $engine_type;
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
select get_lock("hello",1); insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
connect (thread2, localhost, mysqltest,,); insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
connection thread2; insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
begin; insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
send update t1 set eta=1+get_lock("hello",1)*0 where tipo=11; insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
sleep 1; insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
connection thread1; insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
begin; insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
update t1 set eta=2 where tipo=22; --echo ** Get user level lock (ULL) for thread 1
select release_lock("hello"); select get_lock("hello",10);
select * from t1;
connection thread2; --echo ** connection thread2
reap; connect (thread2, localhost, mysqltest,,);
select * from t1; connection thread2;
send commit; --echo ** Start transaction for thread 2
connection thread1; begin;
select * from t1; --echo ** Update will cause a table scan and a new ULL will
commit; --echo ** be created and blocked on the first row where tipo=11.
select * from t1; send update t1 set eta=1+get_lock("hello",10)*0 where tipo=11;
connection thread2; sleep 1;
reap;
select * from t1; --echo ** connection thread1
connection thread1; connection thread1;
select * from t1; --echo ** Start new transaction for thread 1
begin;
--echo ** Update on t1 will cause a table scan which will be blocked because
--echo ** the previously initiated table scan applied exclusive key locks on
--echo ** all primary keys.
--echo ** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
--echo ** do not match the WHERE condition are released.
if ($keep_locks)
{
--error ER_LOCK_WAIT_TIMEOUT
update t1 set eta=2 where tipo=22;
}
if (!$keep_locks)
{
update t1 set eta=2 where tipo=22;
}
--echo ** Release user level name lock from thread 1. This will cause the ULL
--echo ** on thread 2 to end its wait.
select release_lock("hello");
--echo ** Table is now updated with a new eta on tipo=22 for thread 1.
select * from t1;
--echo ** connection thread2
connection thread2;
--echo ** Release the lock and collect result from update on thread 2
reap;
select release_lock("hello");
--echo ** Table should have eta updates where tipo=11 but updates made by
--echo ** thread 1 shouldn't be visible yet.
select * from t1;
--echo ** Sending commit on thread 2.
commit;
--echo ** connection thread1
connection thread1;
--echo ** Make sure table reads didn't change yet on thread 1.
select * from t1;
--echo ** And send final commit on thread 1.
commit;
--echo ** Table should now be updated by both updates in the order of
--echo ** thread 1,2.
select * from t1;
--echo ** connection thread2
connection thread2;
--echo ** Make sure the output is similar for t1.
select * from t1;
--echo ** connection thread1
connection thread1;
select * from t1;
--echo ** connection default
connection default; connection default;
drop table t1; drop table t1;
#
# two UPDATE's running and one changing result set --echo
# --echo **
#connect (thread1, localhost, mysqltest,,); --echo ** two UPDATE's running and one changing result set
connection thread1; --echo **
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); --echo ** connection thread1
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); #connect (thread1, localhost, mysqltest,,);
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); connection thread1;
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); --echo ** Set up table
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd"); eval SET SESSION STORAGE_ENGINE = $engine_type;
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee"); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
select get_lock("hello",10); insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
#connect (thread2, localhost, mysqltest,,); insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
connection thread2; insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
begin; insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
send update t1 set eta=1+get_lock("hello",10)*0 where tipo=1; insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
sleep 1; --echo ** Get ULL "hello" on thread 1
connection thread1; select get_lock("hello",10);
begin;
update t1 set tipo=1 where tipo=2; --echo ** connection thread2
select release_lock("hello"); #connect (thread2, localhost, mysqltest,,);
select * from t1; connection thread2;
connection thread2; --echo ** Start transaction on thread 2
reap; begin;
select * from t1; --echo ** Update will cause a table scan.
send commit; --echo ** This will cause a hang on the first row where tipo=1 until the
connection thread1; --echo ** blocking ULL is released.
select * from t1; send update t1 set eta=1+get_lock("hello",10)*0 where tipo=1;
commit; sleep 1;
select * from t1;
connection thread2; --echo ** connection thread1
reap; connection thread1;
select * from t1; --echo ** Start transaction on thread 1
connection thread1; begin;
select * from t1; --echo ** Update on t1 will cause a table scan which will be blocked because
--echo ** the previously initiated table scan applied exclusive key locks on
--echo ** all primary keys.
--echo ** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
--echo ** do not match the WHERE condition are released.
if ($keep_locks)
{
--error ER_LOCK_WAIT_TIMEOUT
update t1 set tipo=1 where tipo=2;
}
if (!$keep_locks)
{
update t1 set tipo=1 where tipo=2;
}
--echo ** Release ULL. This will release the next waiting ULL on thread 2.
select release_lock("hello");
--echo ** The table should still be updated with updates for thread 1 only:
select * from t1;
--echo ** connection thread2
connection thread2;
--echo ** Release the lock and collect result from thread 2:
reap;
select release_lock("hello");
--echo ** Seen from thread 2 the table should have been updated on four
--echo ** places.
select * from t1;
commit;
--echo ** connection thread1
connection thread1;
--echo ** Thread 2 has committed but the result should remain the same for
--echo ** thread 1 (updated on three places):
select * from t1;
commit;
--echo ** After a commit the table should be merged with the previous
--echo ** commit.
--echo ** This select should show both updates:
select * from t1;
--echo ** connection thread2
connection thread2;
select * from t1;
--echo ** connection thread1
connection thread1;
select * from t1;
--echo ** connection default
connection default; connection default;
drop table t1; drop table t1;
# --echo
# One UPDATE and one INSERT .... Monty's test --echo **
# --echo ** One UPDATE and one INSERT .... Monty's test
--echo **
--echo ** connection thread1
#connect (thread1, localhost, mysqltest,,);
connection thread1;
--echo ** Set up table
eval SET SESSION STORAGE_ENGINE = $engine_type;
create table t1 (a int not null, b int not null);
insert into t1 values (1,1),(2,1),(3,1),(4,1);
--echo ** Create ULL 'hello2'
select get_lock("hello2",10);
--echo ** connection thread2
#connect (thread2, localhost, mysqltest,,);
connection thread2;
--echo ** Begin a new transaction on thread 2
begin;
--echo ** Update will create a table scan which creates a ULL where a=2;
--echo ** this will hang waiting on thread 1.
send update t1 set b=10+get_lock(concat("hello",a),10)*0 where a=2;
sleep 1;
--echo ** connection thread1
connection thread1;
--echo ** Insert new values to t1 from thread 1; this created an implicit
--echo ** commit since there are no on-going transactions.
insert into t1 values (1,1);
--echo ** Release the ULL (thread 2 updates will finish).
select release_lock("hello2");
--echo ** ..but thread 1 will still see t1 as if nothing has happend:
select * from t1;
#connect (thread1, localhost, mysqltest,,); --echo ** connection thread2
connection thread1; connection thread2;
create table t1 (a int not null, b int not null); --echo ** Collect results from thread 2 and release the lock.
insert into t1 values (1,1),(2,1),(3,1),(4,1); reap;
select get_lock("hello2",1000); select release_lock("hello2");
#connect (thread2, localhost, mysqltest,,); --echo ** The table should look like the original+updates for thread 2,
connection thread2; --echo ** and consist of new rows:
begin; select * from t1;
send update t1 set b=10+get_lock(concat("hello",a),1000)*0 where --echo ** Commit changes from thread 2
a=2; commit;
sleep 1;
connection thread1; --echo ** connection default
insert into t1 values (1,1);
select release_lock("hello2");
select * from t1;
connection thread2;
reap;
select * from t1;
send commit;
connection thread1;
sleep 1;
connection thread2;
reap;
connection default; connection default;
drop table t1; drop table t1;
#
# one UPDATE changing result set and SELECT ... FOR UPDATE --echo
# --echo **
#connect (thread1, localhost, mysqltest,,); --echo ** one UPDATE changing result set and SELECT ... FOR UPDATE
connection thread1; --echo **
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); --echo ** connection thread1
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); #connect (thread1, localhost, mysqltest,,);
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); connection thread1;
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); --echo ** Set up table
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd"); eval SET SESSION STORAGE_ENGINE = $engine_type;
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee"); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
select get_lock("hello",10); insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
#connect (thread2, localhost, mysqltest,,); insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
connection thread2; insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
begin; insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
send select * from t1 where tipo=2 FOR UPDATE; insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
sleep 1;
connection thread1; --echo ** connection thread2
begin; #connect (thread2, localhost, mysqltest,,);
select release_lock("hello"); connection thread2;
--error 1205 --echo ** Begin a new transaction on thread 2
update t1 set tipo=1+get_lock("hello",10)*0 where tipo=2; begin;
select * from t1; --echo ** Select a range for update.
connection thread2; select * from t1 where tipo=2 FOR UPDATE;
reap;
select * from t1; --echo ** connection thread1
send commit; connection thread1;
connection thread1; --echo ** Begin a new transaction on thread 1
commit; begin;
connection thread2; --echo ** Update the same range which is marked for update on thread 2; this
reap; --echo ** will hang because of row locks.
select * from t1; --error ER_LOCK_WAIT_TIMEOUT
connection thread1; update t1 set tipo=1 where tipo=2;
select * from t1; --echo ** After the update the table will be unmodified because the previous
--echo ** transaction failed and was rolled back.
select * from t1;
--echo ** connection thread2
connection thread2;
--echo ** The table should look unmodified from thread 2.
select * from t1;
--echo ** Sending a commit should release the row locks and enable
--echo ** thread 1 to complete the transaction.
commit;
--echo ** connection thread1
connection thread1;
--echo ** Commit on thread 1.
commit;
--echo ** connection thread2
connection thread2;
--echo ** The table should not have been changed.
select * from t1;
--echo ** connection thread1
connection thread1;
--echo ** Even on thread 1:
select * from t1;
--echo ** connection default
connection default; connection default;
drop table t1; drop table t1;
#
# one UPDATE not changing result set and SELECT ... FOR UPDATE --echo
# --echo **
#connect (thread1, localhost, mysqltest,,); --echo ** one UPDATE not changing result set and SELECT ... FOR UPDATE
connection thread1; --echo **
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); --echo ** connection thread1
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); #connect (thread1, localhost, mysqltest,,);
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); connection thread1;
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); --echo ** Set up table
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd"); eval SET SESSION STORAGE_ENGINE = $engine_type;
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee"); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
select get_lock("hello",10); insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
#connect (thread2, localhost, mysqltest,,); insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
connection thread2; insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
begin; insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
send select * from t1 where tipo=2 FOR UPDATE; insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
sleep 1;
connection thread1; --echo ** connection thread2
begin; #connect (thread2, localhost, mysqltest,,);
select release_lock("hello"); connection thread2;
--error 1205 --echo ** Starting new transaction on thread 2.
update t1 set tipo=11+get_lock("hello",10)*0 where tipo=22; begin;
select * from t1; --echo ** Starting SELECT .. FOR UPDATE
connection thread2; select * from t1 where tipo=2 FOR UPDATE;
reap;
select * from t1; --echo ** connection thread1
send commit; connection thread1;
connection thread1; --echo
commit; --echo ** Starting new transaction on thread 1
connection thread2; begin;
reap; --echo ** Updating single row using a table scan. This will time out
select * from t1; --echo ** because of ongoing transaction on thread 1 holding lock on
connection thread1; --echo ** all primary keys in the scan.
select * from t1; --echo ** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
--echo ** do not match the WHERE condition are released.
if ($keep_locks)
{
--error ER_LOCK_WAIT_TIMEOUT
update t1 set tipo=11 where tipo=22;
}
if (!$keep_locks)
{
update t1 set tipo=11 where tipo=22;
}
--echo ** After the time out the transaction is aborted; no rows should
--echo ** have changed.
select * from t1;
--echo ** connection thread2
connection thread2;
--echo ** The same thing should hold true for the transaction on
--echo ** thread 2
select * from t1;
send commit;
--echo ** connection thread1
connection thread1;
commit;
--echo ** connection thread2
connection thread2;
--echo ** Even after committing:
reap;
select * from t1;
--echo ** connection thread1
connection thread1;
select * from t1;
--echo ** connection default
connection default; connection default;
drop table t1; drop table t1;
#
# two SELECT ... FOR UPDATE --echo
# --echo **
#connect (thread1, localhost, mysqltest,,); --echo ** two SELECT ... FOR UPDATE
connection thread1; --echo **
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); --echo ** connection thread1
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); #connect (thread1, localhost, mysqltest,,);
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); connection thread1;
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); --echo ** Set up table
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd"); eval SET SESSION STORAGE_ENGINE = $engine_type;
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee"); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
select get_lock("hello",10); insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
#connect (thread2, localhost, mysqltest,,); insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
connection thread2; insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
begin; insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
send select * from t1 where tipo=2 FOR UPDATE; insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
sleep 1;
connection thread1; --echo ** connection thread2
begin; #connect (thread2, localhost, mysqltest,,);
select release_lock("hello"); connection thread2;
--error 1205 --echo ** Begin a new transaction on thread 2
select * from t1 where tipo=1 FOR UPDATE; begin;
connection thread2; select * from t1 where tipo=2 FOR UPDATE;
reap;
select * from t1; --echo ** connection thread1
send commit; connection thread1;
connection thread1; --echo ** Begin a new transaction on thread 1
commit; begin;
connection thread2; --echo ** Selecting a range for update by table scan will be blocked
reap; --echo ** because of on-going transaction on thread 2.
select * from t1; --error ER_LOCK_WAIT_TIMEOUT
connection thread1; select * from t1 where tipo=1 FOR UPDATE;
select * from t1;
--echo ** connection thread2
connection thread2;
--echo ** Table will be unchanged and the select command will not be
--echo ** blocked:
select * from t1;
--echo ** Commit transacton on thread 2.
commit;
--echo ** connection thread1
connection thread1;
--echo ** Commit transaction on thread 1.
commit;
--echo ** connection thread2
connection thread2;
--echo ** Make sure table isn't blocked on thread 2:
select * from t1;
--echo ** connection thread1
connection thread1;
--echo ** Make sure table isn't blocked on thread 1:
select * from t1;
--echo ** connection default
connection default; connection default;
drop table t1; drop table t1;
# --echo
# one UPDATE changing result set and DELETE --echo **
# --echo ** one UPDATE changing result set and DELETE
#connect (thread1, localhost, mysqltest,,); --echo **
connection thread1; --echo ** connection thread1
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); #connect (thread1, localhost, mysqltest,,);
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); connection thread1;
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); --echo ** Set up table
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); eval SET SESSION STORAGE_ENGINE = $engine_type;
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd"); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
select get_lock("hello",10); insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
#connect (thread2, localhost, mysqltest,,); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
connection thread2; insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
begin; insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
send delete from t1 where tipo=2;
sleep 1; --echo ** connection thread2
connection thread1; #connect (thread2, localhost, mysqltest,,);
begin; connection thread2;
select release_lock("hello"); begin;
--error 1205 send delete from t1 where tipo=2;
update t1 set tipo=1+get_lock("hello",10)*0 where tipo=2; sleep 1;
select * from t1;
connection thread2; --echo ** connection thread1
reap; connection thread1;
select * from t1; begin;
send commit; --error ER_LOCK_WAIT_TIMEOUT
connection thread1; update t1 set tipo=1 where tipo=2;
commit; select * from t1;
connection thread2;
reap; --echo ** connection thread2
select * from t1; connection thread2;
connection thread1; reap;
select * from t1; select * from t1;
send commit;
--echo ** connection thread1
connection thread1;
commit;
--echo ** connection thread2
connection thread2;
reap;
select * from t1;
--echo ** connection thread1
connection thread1;
select * from t1;
--echo ** connection default
connection default; connection default;
drop table t1; drop table t1;
# --echo
# one UPDATE not changing result set and DELETE --echo **
# --echo ** one UPDATE not changing result set and DELETE
#connect (thread1, localhost, mysqltest,,); --echo **
connection thread1; --echo ** connection thread1
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); #connect (thread1, localhost, mysqltest,,);
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); connection thread1;
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); --echo ** Set up table
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); eval SET SESSION STORAGE_ENGINE = $engine_type;
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd"); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
select get_lock("hello",10); insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
#connect (thread2, localhost, mysqltest,,); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
connection thread2; insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
begin; insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
send delete from t1 where tipo=2;
sleep 1; --echo ** connection thread2
connection thread1; #connect (thread2, localhost, mysqltest,,);
begin; connection thread2;
select release_lock("hello"); begin;
update t1 set tipo=1+get_lock("hello",10)*0 where tipo=22; send delete from t1 where tipo=2;
select * from t1; sleep 1;
connection thread2;
reap; --echo ** connection thread1
select * from t1; connection thread1;
send commit; begin;
connection thread1; --echo ** Update on t1 will cause a table scan which will be blocked because
commit; --echo ** the previously initiated table scan applied exclusive key locks on
connection thread2; --echo ** all primary keys.
reap; --echo ** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
select * from t1; --echo ** do not match the WHERE condition are released.
connection thread1; if ($keep_locks)
select * from t1; {
--error ER_LOCK_WAIT_TIMEOUT
update t1 set tipo=1 where tipo=22;
}
if (!$keep_locks)
{
update t1 set tipo=1 where tipo=22;
}
select * from t1;
--echo ** connection thread2
connection thread2;
reap;
select * from t1;
send commit;
--echo ** connection thread1
connection thread1;
commit;
--echo ** connection thread2
connection thread2;
reap;
select * from t1;
--echo ** connection thread1
connection thread1;
select * from t1;
--echo ** connection default
connection default; connection default;
sleep 1;
drop table t1; drop table t1;
disconnect thread1; disconnect thread1;
disconnect thread2; disconnect thread2;
mysql-test/r/concurrent_innodb_safelog.result 0 → 100644
View file @ 6d6b9ffe
SET GLOBAL TRANSACTION ISOLATION LEVEL REPEATABLE READ;
SELECT @@global.tx_isolation;
@@global.tx_isolation
REPEATABLE-READ
SELECT @@global.innodb_locks_unsafe_for_binlog;
@@global.innodb_locks_unsafe_for_binlog
0
# keep_locks == 1
GRANT USAGE ON test.* TO mysqltest@localhost;
DO release_lock("hello");
DO release_lock("hello2");
drop table if exists t1;
**
** two UPDATE's running and both changing distinct result sets
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** Get user level lock (ULL) for thread 1
select get_lock("hello",10);
get_lock("hello",10)
1
** connection thread2
** Start transaction for thread 2
begin;
** Update will cause a table scan and a new ULL will
** be created and blocked on the first row where tipo=11.
update t1 set eta=1+get_lock("hello",10)*0 where tipo=11;
** connection thread1
** Start new transaction for thread 1
begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set eta=2 where tipo=22;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** Release user level name lock from thread 1. This will cause the ULL
** on thread 2 to end its wait.
select release_lock("hello");
release_lock("hello")
1
** Table is now updated with a new eta on tipo=22 for thread 1.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Release the lock and collect result from update on thread 2
select release_lock("hello");
release_lock("hello")
1
** Table should have eta updates where tipo=11 but updates made by
** thread 1 shouldn't be visible yet.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** Sending commit on thread 2.
commit;
** connection thread1
** Make sure table reads didn't change yet on thread 1.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** And send final commit on thread 1.
commit;
** Table should now be updated by both updates in the order of
** thread 1,2.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Make sure the output is similar for t1.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;
**
** two UPDATE's running and one changing result set
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** Get ULL "hello" on thread 1
select get_lock("hello",10);
get_lock("hello",10)
1
** connection thread2
** Start transaction on thread 2
begin;
** Update will cause a table scan.
** This will cause a hang on the first row where tipo=1 until the
** blocking ULL is released.
update t1 set eta=1+get_lock("hello",10)*0 where tipo=1;
** connection thread1
** Start transaction on thread 1
begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=1 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** Release ULL. This will release the next waiting ULL on thread 2.
select release_lock("hello");
release_lock("hello")
1
** The table should still be updated with updates for thread 1 only:
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Release the lock and collect result from thread 2:
select release_lock("hello");
release_lock("hello")
1
** Seen from thread 2 the table should have been updated on four
** places.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
1 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
1 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
** Thread 2 has committed but the result should remain the same for
** thread 1 (updated on three places):
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** After a commit the table should be merged with the previous
** commit.
** This select should show both updates:
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
1 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
1 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
1 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
1 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
1 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
1 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
1 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;
**
** One UPDATE and one INSERT .... Monty's test
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1 (a int not null, b int not null);
insert into t1 values (1,1),(2,1),(3,1),(4,1);
** Create ULL 'hello2'
select get_lock("hello2",10);
get_lock("hello2",10)
1
** connection thread2
** Begin a new transaction on thread 2
begin;
** Update will create a table scan which creates a ULL where a=2;
** this will hang waiting on thread 1.
update t1 set b=10+get_lock(concat("hello",a),10)*0 where a=2;
** connection thread1
** Insert new values to t1 from thread 1; this created an implicit
** commit since there are no on-going transactions.
insert into t1 values (1,1);
** Release the ULL (thread 2 updates will finish).
select release_lock("hello2");
release_lock("hello2")
1
** ..but thread 1 will still see t1 as if nothing has happend:
select * from t1;
a b
1 1
2 1
3 1
4 1
1 1
** connection thread2
** Collect results from thread 2 and release the lock.
select release_lock("hello2");
release_lock("hello2")
1
** The table should look like the original+updates for thread 2,
** and consist of new rows:
select * from t1;
a b
1 1
2 10
3 1
4 1
1 1
** Commit changes from thread 2
commit;
** connection default
drop table t1;
**
** one UPDATE changing result set and SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
** Begin a new transaction on thread 2
begin;
** Select a range for update.
select * from t1 where tipo=2 FOR UPDATE;
eta tipo c
20 2 ddddddddddddddddddddddddddddddddddddddddddd
40 2 fffffffffffffffffffffffffffffffffffffffffff
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Begin a new transaction on thread 1
begin;
** Update the same range which is marked for update on thread 2; this
** will hang because of row locks.
update t1 set tipo=1 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** After the update the table will be unmodified because the previous
** transaction failed and was rolled back.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** The table should look unmodified from thread 2.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** Sending a commit should release the row locks and enable
** thread 1 to complete the transaction.
commit;
** connection thread1
** Commit on thread 1.
commit;
** connection thread2
** The table should not have been changed.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
** Even on thread 1:
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;
**
** one UPDATE not changing result set and SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
** Starting new transaction on thread 2.
begin;
** Starting SELECT .. FOR UPDATE
select * from t1 where tipo=2 FOR UPDATE;
eta tipo c
20 2 ddddddddddddddddddddddddddddddddddddddddddd
40 2 fffffffffffffffffffffffffffffffffffffffffff
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Starting new transaction on thread 1
begin;
** Updating single row using a table scan. This will time out
** because of ongoing transaction on thread 1 holding lock on
** all primary keys in the scan.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=11 where tipo=22;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** After the time out the transaction is aborted; no rows should
** have changed.
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** The same thing should hold true for the transaction on
** thread 2
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
commit;
** connection thread2
** Even after committing:
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;
**
** two SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
** Begin a new transaction on thread 2
begin;
select * from t1 where tipo=2 FOR UPDATE;
eta tipo c
20 2 ddddddddddddddddddddddddddddddddddddddddddd
40 2 fffffffffffffffffffffffffffffffffffffffffff
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Begin a new transaction on thread 1
begin;
** Selecting a range for update by table scan will be blocked
** because of on-going transaction on thread 2.
select * from t1 where tipo=1 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** connection thread2
** Table will be unchanged and the select command will not be
** blocked:
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** Commit transacton on thread 2.
commit;
** connection thread1
** Commit transaction on thread 1.
commit;
** connection thread2
** Make sure table isn't blocked on thread 2:
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
** Make sure table isn't blocked on thread 1:
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;
**
** one UPDATE changing result set and DELETE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
begin;
delete from t1 where tipo=2;
** connection thread1
begin;
update t1 set tipo=1 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50 1 ggggggggggggggggggggggggggggggggggggggggggg
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
commit;
** connection thread2
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50 1 ggggggggggggggggggggggggggggggggggggggggggg
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50 1 ggggggggggggggggggggggggggggggggggggggggggg
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;
**
** one UPDATE not changing result set and DELETE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
insert into t1 values (20,2,"ddddddddddddddddddddddddddddddddddddddddddd");
insert into t1 values (30,1,"eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
insert into t1 values (40,2,"fffffffffffffffffffffffffffffffffffffffffff");
insert into t1 values (50,1,"ggggggggggggggggggggggggggggggggggggggggggg");
insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** connection thread2
begin;
delete from t1 where tipo=2;
** connection thread1
begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=1 where tipo=22;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
20 2 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 2 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50 1 ggggggggggggggggggggggggggggggggggggggggggg
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
** connection thread1
commit;
** connection thread2
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50 1 ggggggggggggggggggggggggggggggggggggggggggg
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1;
eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
50 1 ggggggggggggggggggggggggggggggggggggggggggg
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1;
mysql-test/r/concurrent_innodb.result → mysql-test/r/concurrent_innodb_unsafelog.result
View file @ 6d6b9ffe
SET SESSION STORAGE_ENGINE = InnoDB; SET GLOBAL TRANSACTION ISOLATION LEVEL REPEATABLE READ;
SELECT @@global.tx_isolation;
@@global.tx_isolation
REPEATABLE-READ
SELECT @@global.innodb_locks_unsafe_for_binlog;
@@global.innodb_locks_unsafe_for_binlog
1
# keep_locks == 0
GRANT USAGE ON test.* TO mysqltest@localhost;
DO release_lock("hello");
DO release_lock("hello2");
drop table if exists t1; drop table if exists t1;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
**
** two UPDATE's running and both changing distinct result sets
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB; SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc"); insert into t1 values (10,1,"ccccccccccccccccccccccccccccccccccccccccccc");
...@@ -13,16 +29,31 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); ...@@ -13,16 +29,31 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
select get_lock("hello",1); ** Get user level lock (ULL) for thread 1
get_lock("hello",1) select get_lock("hello",10);
get_lock("hello",10)
1 1
** connection thread2
** Start transaction for thread 2
begin; begin;
update t1 set eta=1+get_lock("hello",1)*0 where tipo=11; ** Update will cause a table scan and a new ULL will
** be created and blocked on the first row where tipo=11.
update t1 set eta=1+get_lock("hello",10)*0 where tipo=11;
** connection thread1
** Start new transaction for thread 1
begin; begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set eta=2 where tipo=22; update t1 set eta=2 where tipo=22;
** Release user level name lock from thread 1. This will cause the ULL
** on thread 2 to end its wait.
select release_lock("hello"); select release_lock("hello");
release_lock("hello") release_lock("hello")
1 1
** Table is now updated with a new eta on tipo=22 for thread 1.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -36,6 +67,13 @@ eta tipo c ...@@ -36,6 +67,13 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Release the lock and collect result from update on thread 2
select release_lock("hello");
release_lock("hello")
1
** Table should have eta updates where tipo=11 but updates made by
** thread 1 shouldn't be visible yet.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -49,7 +87,10 @@ eta tipo c ...@@ -49,7 +87,10 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit; ** Sending commit on thread 2.
commit;
** connection thread1
** Make sure table reads didn't change yet on thread 1.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -63,7 +104,10 @@ eta tipo c ...@@ -63,7 +104,10 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** And send final commit on thread 1.
commit; commit;
** Table should now be updated by both updates in the order of
** thread 1,2.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -77,6 +121,8 @@ eta tipo c ...@@ -77,6 +121,8 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Make sure the output is similar for t1.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -90,6 +136,7 @@ eta tipo c ...@@ -90,6 +136,7 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -103,7 +150,15 @@ eta tipo c ...@@ -103,7 +150,15 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 2 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 1 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1; drop table t1;
**
** two UPDATE's running and one changing result set
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
...@@ -116,16 +171,31 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); ...@@ -116,16 +171,31 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
** Get ULL "hello" on thread 1
select get_lock("hello",10); select get_lock("hello",10);
get_lock("hello",10) get_lock("hello",10)
0 1
** connection thread2
** Start transaction on thread 2
begin; begin;
update t1 set eta=1+get_lock("hello",10)*0 where tipo=1; ** Update will cause a table scan.
** This will cause a hang on the first row where tipo=1 until the
** blocking ULL is released.
update t1 set eta=1+get_lock("hello",10)*0 where tipo=1;
** connection thread1
** Start transaction on thread 1
begin; begin;
** Update on t1 will cause a table scan which will be blocked because
** the previously initiated table scan applied exclusive key locks on
** all primary keys.
** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=1 where tipo=2; update t1 set tipo=1 where tipo=2;
** Release ULL. This will release the next waiting ULL on thread 2.
select release_lock("hello"); select release_lock("hello");
release_lock("hello") release_lock("hello")
0 1
** The table should still be updated with updates for thread 1 only:
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -139,6 +209,13 @@ eta tipo c ...@@ -139,6 +209,13 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
** Release the lock and collect result from thread 2:
select release_lock("hello");
release_lock("hello")
1
** Seen from thread 2 the table should have been updated on four
** places.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -152,7 +229,10 @@ eta tipo c ...@@ -152,7 +229,10 @@ eta tipo c
1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit; commit;
** connection thread1
** Thread 2 has committed but the result should remain the same for
** thread 1 (updated on three places):
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -167,19 +247,23 @@ eta tipo c ...@@ -167,19 +247,23 @@ eta tipo c
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit; commit;
** After a commit the table should be merged with the previous
** commit.
** This select should show both updates:
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 8 8 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
10 1 ccccccccccccccccccccccccccccccccccccccccccc 1 1 ccccccccccccccccccccccccccccccccccccccccccc
20 1 ddddddddddddddddddddddddddddddddddddddddddd 20 1 ddddddddddddddddddddddddddddddddddddddddddd
30 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee 1 1 eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
40 1 fffffffffffffffffffffffffffffffffffffffffff 40 1 fffffffffffffffffffffffffffffffffffffffffff
50 1 ggggggggggggggggggggggggggggggggggggggggggg 1 1 ggggggggggggggggggggggggggggggggggggggggggg
60 1 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh 60 1 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -193,6 +277,7 @@ eta tipo c ...@@ -193,6 +277,7 @@ eta tipo c
1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -206,19 +291,36 @@ eta tipo c ...@@ -206,19 +291,36 @@ eta tipo c
1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 1 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1; drop table t1;
**
** One UPDATE and one INSERT .... Monty's test
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1 (a int not null, b int not null); create table t1 (a int not null, b int not null);
insert into t1 values (1,1),(2,1),(3,1),(4,1); insert into t1 values (1,1),(2,1),(3,1),(4,1);
select get_lock("hello2",1000); ** Create ULL 'hello2'
get_lock("hello2",1000) select get_lock("hello2",10);
get_lock("hello2",10)
1 1
** connection thread2
** Begin a new transaction on thread 2
begin; begin;
update t1 set b=10+get_lock(concat("hello",a),1000)*0 where ** Update will create a table scan which creates a ULL where a=2;
a=2; ** this will hang waiting on thread 1.
update t1 set b=10+get_lock(concat("hello",a),10)*0 where a=2;
** connection thread1
** Insert new values to t1 from thread 1; this created an implicit
** commit since there are no on-going transactions.
insert into t1 values (1,1); insert into t1 values (1,1);
** Release the ULL (thread 2 updates will finish).
select release_lock("hello2"); select release_lock("hello2");
release_lock("hello2") release_lock("hello2")
1 1
** ..but thread 1 will still see t1 as if nothing has happend:
select * from t1; select * from t1;
a b a b
1 1 1 1
...@@ -226,6 +328,13 @@ a b ...@@ -226,6 +328,13 @@ a b
3 1 3 1
4 1 4 1
1 1 1 1
** connection thread2
** Collect results from thread 2 and release the lock.
select release_lock("hello2");
release_lock("hello2")
1
** The table should look like the original+updates for thread 2,
** and consist of new rows:
select * from t1; select * from t1;
a b a b
1 1 1 1
...@@ -233,8 +342,17 @@ a b ...@@ -233,8 +342,17 @@ a b
3 1 3 1
4 1 4 1
1 1 1 1
commit; ** Commit changes from thread 2
commit;
** connection default
drop table t1; drop table t1;
**
** one UPDATE changing result set and SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
...@@ -247,17 +365,24 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); ...@@ -247,17 +365,24 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
select get_lock("hello",10); ** connection thread2
get_lock("hello",10) ** Begin a new transaction on thread 2
1
begin; begin;
select * from t1 where tipo=2 FOR UPDATE; ** Select a range for update.
select * from t1 where tipo=2 FOR UPDATE;
eta tipo c
20 2 ddddddddddddddddddddddddddddddddddddddddddd
40 2 fffffffffffffffffffffffffffffffffffffffffff
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Begin a new transaction on thread 1
begin; begin;
select release_lock("hello"); ** Update the same range which is marked for update on thread 2; this
release_lock("hello") ** will hang because of row locks.
1 update t1 set tipo=1 where tipo=2;
update t1 set tipo=1+get_lock("hello",10)*0 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** After the update the table will be unmodified because the previous
** transaction failed and was rolled back.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -271,10 +396,8 @@ eta tipo c ...@@ -271,10 +396,8 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
eta tipo c ** connection thread2
20 2 ddddddddddddddddddddddddddddddddddddddddddd ** The table should look unmodified from thread 2.
40 2 fffffffffffffffffffffffffffffffffffffffffff
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -288,8 +411,14 @@ eta tipo c ...@@ -288,8 +411,14 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit; ** Sending a commit should release the row locks and enable
** thread 1 to complete the transaction.
commit; commit;
** connection thread1
** Commit on thread 1.
commit;
** connection thread2
** The table should not have been changed.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -303,6 +432,8 @@ eta tipo c ...@@ -303,6 +432,8 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
** Even on thread 1:
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -316,7 +447,15 @@ eta tipo c ...@@ -316,7 +447,15 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1; drop table t1;
**
** one UPDATE not changing result set and SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
...@@ -329,17 +468,27 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); ...@@ -329,17 +468,27 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
select get_lock("hello",10); ** connection thread2
get_lock("hello",10) ** Starting new transaction on thread 2.
1
begin; begin;
select * from t1 where tipo=2 FOR UPDATE; ** Starting SELECT .. FOR UPDATE
select * from t1 where tipo=2 FOR UPDATE;
eta tipo c
20 2 ddddddddddddddddddddddddddddddddddddddddddd
40 2 fffffffffffffffffffffffffffffffffffffffffff
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Starting new transaction on thread 1
begin; begin;
select release_lock("hello"); ** Updating single row using a table scan. This will time out
release_lock("hello") ** because of ongoing transaction on thread 1 holding lock on
1 ** all primary keys in the scan.
update t1 set tipo=11+get_lock("hello",10)*0 where tipo=22; ** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
ERROR HY000: Lock wait timeout exceeded; try restarting transaction ** do not match the WHERE condition are released.
update t1 set tipo=11 where tipo=22;
** After the time out the transaction is aborted; no rows should
** have changed.
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -351,12 +500,11 @@ eta tipo c ...@@ -351,12 +500,11 @@ eta tipo c
50 1 ggggggggggggggggggggggggggggggggggggggggggg 50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh 60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 11 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
eta tipo c ** connection thread2
20 2 ddddddddddddddddddddddddddddddddddddddddddd ** The same thing should hold true for the transaction on
40 2 fffffffffffffffffffffffffffffffffffffffffff ** thread 2
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -370,8 +518,11 @@ eta tipo c ...@@ -370,8 +518,11 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
commit; commit;
** connection thread1
commit;
** connection thread2
** Even after committing:
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -383,8 +534,9 @@ eta tipo c ...@@ -383,8 +534,9 @@ eta tipo c
50 1 ggggggggggggggggggggggggggggggggggggggggggg 50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh 60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 11 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -396,9 +548,17 @@ eta tipo c ...@@ -396,9 +548,17 @@ eta tipo c
50 1 ggggggggggggggggggggggggggggggggggggggggggg 50 1 ggggggggggggggggggggggggggggggggggggggggggg
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh 60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 11 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1; drop table t1;
**
** two SELECT ... FOR UPDATE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
...@@ -411,21 +571,24 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); ...@@ -411,21 +571,24 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
select get_lock("hello",10); ** connection thread2
get_lock("hello",10) ** Begin a new transaction on thread 2
1
begin; begin;
select * from t1 where tipo=2 FOR UPDATE; select * from t1 where tipo=2 FOR UPDATE;
begin;
select release_lock("hello");
release_lock("hello")
1
select * from t1 where tipo=1 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
eta tipo c eta tipo c
20 2 ddddddddddddddddddddddddddddddddddddddddddd 20 2 ddddddddddddddddddddddddddddddddddddddddddd
40 2 fffffffffffffffffffffffffffffffffffffffffff 40 2 fffffffffffffffffffffffffffffffffffffffffff
60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh 60 2 hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
** connection thread1
** Begin a new transaction on thread 1
begin;
** Selecting a range for update by table scan will be blocked
** because of on-going transaction on thread 2.
select * from t1 where tipo=1 FOR UPDATE;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction
** connection thread2
** Table will be unchanged and the select command will not be
** blocked:
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -439,8 +602,13 @@ eta tipo c ...@@ -439,8 +602,13 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit; ** Commit transacton on thread 2.
commit; commit;
** connection thread1
** Commit transaction on thread 1.
commit;
** connection thread2
** Make sure table isn't blocked on thread 2:
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -454,6 +622,8 @@ eta tipo c ...@@ -454,6 +622,8 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
** Make sure table isn't blocked on thread 1:
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -467,7 +637,15 @@ eta tipo c ...@@ -467,7 +637,15 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1; drop table t1;
**
** one UPDATE changing result set and DELETE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
...@@ -480,16 +658,12 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); ...@@ -480,16 +658,12 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
select get_lock("hello",10); ** connection thread2
get_lock("hello",10)
1
begin; begin;
delete from t1 where tipo=2; delete from t1 where tipo=2;
** connection thread1
begin; begin;
select release_lock("hello"); update t1 set tipo=1 where tipo=2;
release_lock("hello")
1
update t1 set tipo=1+get_lock("hello",10)*0 where tipo=2;
ERROR HY000: Lock wait timeout exceeded; try restarting transaction ERROR HY000: Lock wait timeout exceeded; try restarting transaction
select * from t1; select * from t1;
eta tipo c eta tipo c
...@@ -504,6 +678,7 @@ eta tipo c ...@@ -504,6 +678,7 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -514,8 +689,10 @@ eta tipo c ...@@ -514,8 +689,10 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
commit; commit;
** connection thread1
commit;
** connection thread2
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -526,6 +703,7 @@ eta tipo c ...@@ -526,6 +703,7 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -536,7 +714,15 @@ eta tipo c ...@@ -536,7 +714,15 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1; drop table t1;
**
** one UPDATE not changing result set and DELETE
**
** connection thread1
** Set up table
SET SESSION STORAGE_ENGINE = InnoDB;
create table t1(eta int(11) not null, tipo int(11), c varchar(255)); create table t1(eta int(11) not null, tipo int(11), c varchar(255));
insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); insert into t1 values (7,7, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa");
insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); insert into t1 values (8,8, "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb");
...@@ -549,16 +735,17 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh"); ...@@ -549,16 +735,17 @@ insert into t1 values (60,2,"hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh");
insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"); insert into t1 values (70,1,"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii");
insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj"); insert into t1 values (80,22,"jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj");
insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk"); insert into t1 values (90,11,"kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk");
select get_lock("hello",10); ** connection thread2
get_lock("hello",10)
1
begin; begin;
delete from t1 where tipo=2; delete from t1 where tipo=2;
** connection thread1
begin; begin;
select release_lock("hello"); ** Update on t1 will cause a table scan which will be blocked because
release_lock("hello") ** the previously initiated table scan applied exclusive key locks on
1 ** all primary keys.
update t1 set tipo=1+get_lock("hello",10)*0 where tipo=22; ** Not so if innodb_locks_unsafe_for_binlog is set. The locks that
** do not match the WHERE condition are released.
update t1 set tipo=1 where tipo=22;
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -572,6 +759,7 @@ eta tipo c ...@@ -572,6 +759,7 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 1 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 1 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread2
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -582,8 +770,10 @@ eta tipo c ...@@ -582,8 +770,10 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 22 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
commit;
commit; commit;
** connection thread1
commit;
** connection thread2
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -594,6 +784,7 @@ eta tipo c ...@@ -594,6 +784,7 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 1 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 1 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection thread1
select * from t1; select * from t1;
eta tipo c eta tipo c
7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 7 7 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
...@@ -604,4 +795,5 @@ eta tipo c ...@@ -604,4 +795,5 @@ eta tipo c
70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 70 1 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
80 1 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj 80 1 jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 90 11 kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
** connection default
drop table t1; drop table t1;
mysql-test/t/concurrent_innodb.test → mysql-test/t/concurrent_innodb_safelog.test
View file @ 6d6b9ffe
# t/concurrent_innodb.test # t/concurrent_innodb_safelog.test
# #
# Concurrent InnoDB tests, mainly in UPDATE's # Concurrent InnoDB tests
# Bug#3300
# Designed and tested by Sinisa Milivojevic, sinisa@mysql.com
#
# two non-interfering UPDATE's not changing result set
# #
# Last update: # Last update:
# 2006-07-26 ML test refactored (MySQL 5.1) # 2006-07-26 ML test refactored (MySQL 5.1)
# main code t/innodb_concurrent.test -> include/concurrent.inc # main code t/innodb_concurrent.test -> include/concurrent.inc
# new wrapper t/concurrent_innodb.test # new wrapper t/concurrent_innodb.test
# 2008-06-03 KP test refactored; removed name locks, added comments.
# test takes circa 5 minutes to run, so it's big # renamed wrapper t/concurrent_innodb.test ->
--source include/big_test.inc # t/concurrent_innodb_unsafelog.test
# new wrapper t/concurrent_innodb_safelog.test
#
--source include/have_innodb.inc --source include/have_innodb.inc
let $engine_type= InnoDB; let $engine_type= InnoDB;
SET GLOBAL TRANSACTION ISOLATION LEVEL REPEATABLE READ;
# innodb_locks_unsafe_for_binlog not set for this test
--source include/concurrent.inc --source include/concurrent.inc
mysql-test/t/concurrent_innodb-master.opt → mysql-test/t/concurrent_innodb_unsafelog-master.opt
View file @ 6d6b9ffe
--innodb_locks_unsafe_for_binlog --innodb_locks_unsafe_for_binlog
--innodb_lock_wait_timeout=1
mysql-test/t/concurrent_innodb_unsafelog.test 0 → 100644
View file @ 6d6b9ffe
# t/concurrent_innodb_unsafelog.test
#
# Concurrent InnoDB tests
#
# Last update:
# 2006-07-26 ML test refactored (MySQL 5.1)
# main code t/innodb_concurrent.test -> include/concurrent.inc
# new wrapper t/concurrent_innodb.test
# 2008-06-03 KP test refactored; removed name locks, added comments.
# renamed wrapper t/concurrent_innodb.test ->
# t/concurrent_innodb_unsafelog.test
# new wrapper t/concurrent_innodb_safelog.test
#
--source include/have_innodb.inc
let $engine_type= InnoDB;
SET GLOBAL TRANSACTION ISOLATION LEVEL REPEATABLE READ;
# innodb_locks_unsafe_for_binlog is set fro this test.
--source include/concurrent.inc
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7