BUG#59338 Inconsistency in binlog for statements that don't change any rows STATEMENT SBR

In SBR, if a statement does not fail, it is always written to the binary
log, regardless if rows are changed or not. If there is a failure, a
statement is only written to the binary log if a non-transactional (.e.g.
MyIsam) engine is updated.

INSERT ON DUPLICATE KEY UPDATE and INSERT IGNORE were not following the
rule above and were not written to the binary log, if then engine was
Innodb.

mysql-test/extra/rpl_tests/rpl_insert_duplicate.test:
  Added test case.
mysql-test/extra/rpl_tests/rpl_insert_ignore.test:
  Updated test case.
mysql-test/include/commit.inc:
  Updated test case as the calls to the binary log have changed
  for INSERT ON DUPLICATE and INSERT IGNORE.
mysql-test/r/commit_1innodb.result:
  Updated result file.
mysql-test/suite/rpl/r/rpl_insert_duplicate.result:
  Added test case.
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
  Updated result file.
mysql-test/suite/rpl/t/rpl_insert_duplicate.test:
  Added test case.
mysql-test/suite/rpl/t/rpl_insert_ignore.test:
  Improved test case.

mysql-test/extra/rpl_tests/rpl_insert_duplicate.test

+# BUG#59338 Inconsistency in binlog for statements that don't change any rows STATEMENT SBR
+# In SBR, if a statement does not fail, it is always written to the binary log,
+# regardless if rows are changed or not. If there is a failure, a statement is
+# only written to the binary log if a non-transactional (.e.g. MyIsam) engine
+# is updated. INSERT ON DUPLICATE KEY UPDATE was not following the rule above
+# and was not written to the binary log, if then engine was Innodb.
+#
+# In this test case, we check if INSERT ON DUPLICATE KEY UPDATE that does not
+# change anything is still written to the binary log.
+
+# Prepare environment
+--connection master
+
+eval CREATE TABLE t1 (
+ a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=$engine_type;
+
+eval CREATE TABLE t2 (
+ a INT UNSIGNED
+) ENGINE=$engine_type;
+
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+
+# An insert duplicate that does not update anything must be written to the binary
+# log in SBR and MIXED modes. We check this property by summing a before and after
+# the update and comparing the binlog positions. The sum should be the same at both
+# points and the statement should be in the binary log.
+--let $binlog_file= query_get_value("SHOW MASTER STATUS", File, 1)
+--let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1)
+--let $statement_file=INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a
+--eval $statement_file
+
+--let $assert_cond= SUM(a) = 1 FROM t1
+--let $assert_text= Sum of elements in t1 should be 1.
+--source include/assert.inc
+
+if (`SELECT @@BINLOG_FORMAT = 'ROW'`)
+{
+  --let $binlog_position_cmp= =
+  --let $assert_cond= [SHOW MASTER STATUS, Position, 1] $binlog_position_cmp $binlog_start
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('Innodb')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 1, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('MyIsam')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 0, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+--source include/assert.inc
+
+# Compare master and slave
+--sync_slave_with_master
+--let $diff_tables= master:test.t1 , slave:test.t1
+--source include/diff_tables.inc
+
+# Clean up
+--connection master
+drop table t1, t2;
+--sync_slave_with_master

mysql-test/extra/rpl_tests/rpl_insert_ignore.test

@@ -5,6 +5,7 @@
 # Slave needs to be started with --innodb to store table in InnoDB.
 # Same test for MyISAM (which had no bug).
 
+--connection master
 eval CREATE TABLE t1 (
  a int unsigned not null auto_increment primary key,
  b int unsigned,
@@ -32,38 +33,49 @@ INSERT INTO t2 VALUES (5, 4);
 INSERT INTO t2 VALUES (6, 6);
 
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-
-# Compare results
-
-SELECT * FROM t1 ORDER BY a;
-
-sync_slave_with_master;
-SELECT * FROM t1 ORDER BY a;
-
-# Now do the same for MyISAM
-
-connection master;
-drop table t1;
-eval CREATE TABLE t1 (
- a int unsigned not null auto_increment primary key,
- b int unsigned,
- unique (b)
-) ENGINE=$engine_type2;
-
-INSERT INTO t1 VALUES (1, 1);
-INSERT INTO t1 VALUES (2, 2);
-INSERT INTO t1 VALUES (3, 3);
-INSERT INTO t1 VALUES (4, 4);
-
-INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-
-SELECT * FROM t1 ORDER BY a;
-
-sync_slave_with_master;
-SELECT * FROM t1 ORDER BY a;
-
-connection master;
+--let $assert_cond= COUNT(*) = 6 FROM t1
+--let $assert_text= Count of elements in t1 should be 6.
+--source include/assert.inc
+
+# Compare master and slave
+--sync_slave_with_master
+--let $diff_tables= master:test.t1 , slave:test.t1
+--source include/diff_tables.inc
+
+# BUG#59338 Inconsistency in binlog for statements that don't change any rows STATEMENT SBR
+# An insert ignore that does not update anything must be written to the binary log in SBR
+# and MIXED modes. We check this property by counting occurrences in t1 before and after
+# the insert and comparing the binlog positions. The count should be the same in both points
+# and the statement should be in the binary log.
+--connection master
+--let $binlog_file= query_get_value("SHOW MASTER STATUS", File, 1)
+--let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1)
+--let $statement_file=INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a
+--eval $statement_file
+
+--let $assert_cond= COUNT(*) = 6 FROM t1
+--let $assert_text= Count of elements in t1 should be 6.
+--source include/assert.inc
+
+if (`SELECT @@BINLOG_FORMAT = 'ROW'`)
+{
+  --let $binlog_position_cmp= =
+  --let $assert_cond= [SHOW MASTER STATUS, Position, 1] $binlog_position_cmp $binlog_start
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('Innodb')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 2, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT != 'ROW' && UPPER('$engine_type') = UPPER('MyIsam')`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 1, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+--source include/assert.inc
+
+# Clean up
+--connection master
 drop table t1, t2;
-sync_slave_with_master;
-
-# End of 4.1 tests
+--sync_slave_with_master

mysql-test/include/commit.inc

@@ -502,16 +502,16 @@ call p_verify_status_increment(2, 2, 2, 2);
 --echo # 12. Read-write statement: IODKU, change 0 rows. 
 --echo #
 insert t1 set a=2 on duplicate key update a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 
 --echo # 13. Read-write statement: INSERT IGNORE, change 0 rows. 
 --echo #
 insert ignore t1 set a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 
 --echo # 14. Read-write statement: INSERT IGNORE, change 1 row. 
 --echo #

mysql-test/r/commit_1innodb.result

@@ -518,21 +518,21 @@ SUCCESS
 # 12. Read-write statement: IODKU, change 0 rows. 
 #
 insert t1 set a=2 on duplicate key update a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 # 13. Read-write statement: INSERT IGNORE, change 0 rows. 
 #
 insert ignore t1 set a=2;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 commit;
-call p_verify_status_increment(1, 0, 1, 0);
+call p_verify_status_increment(2, 2, 1, 0);
 SUCCESS
 
 # 14. Read-write statement: INSERT IGNORE, change 1 row. 

mysql-test/suite/rpl/r/rpl_insert_duplicate.result

+include/master-slave.inc
+[connection master]
+CREATE TABLE t1 (
+a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=innodb;
+CREATE TABLE t2 (
+a INT UNSIGNED
+) ENGINE=innodb;
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
+include/assert.inc [Sum of elements in t1 should be 1.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
+drop table t1, t2;
+CREATE TABLE t1 (
+a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=myisam;
+CREATE TABLE t2 (
+a INT UNSIGNED
+) ENGINE=myisam;
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
+include/assert.inc [Sum of elements in t1 should be 1.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
+drop table t1, t2;
+include/rpl_end.inc

mysql-test/suite/rpl/r/rpl_insert_ignore.result

@@ -20,48 +20,36 @@ INSERT INTO t2 VALUES (4, 3);
 INSERT INTO t2 VALUES (5, 4);
 INSERT INTO t2 VALUES (6, 6);
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
-drop table t1;
+include/assert.inc [Count of elements in t1 should be 6.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
+INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
+include/assert.inc [Count of elements in t1 should be 6.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+drop table t1, t2;
 CREATE TABLE t1 (
 a int unsigned not null auto_increment primary key,
 b int unsigned,
 unique (b)
-) ENGINE=myisam;
-INSERT INTO t1 VALUES (1, 1);
-INSERT INTO t1 VALUES (2, 2);
-INSERT INTO t1 VALUES (3, 3);
-INSERT INTO t1 VALUES (4, 4);
+) ENGINE=innodb;
+CREATE TABLE t2 (
+a int unsigned, # to force INSERT SELECT to have a certain order
+b int unsigned
+) ENGINE=innodb;
+INSERT INTO t1 VALUES (NULL, 1);
+INSERT INTO t1 VALUES (NULL, 2);
+INSERT INTO t1 VALUES (NULL, 3);
+INSERT INTO t1 VALUES (NULL, 4);
+INSERT INTO t2 VALUES (1, 1);
+INSERT INTO t2 VALUES (2, 2);
+INSERT INTO t2 VALUES (3, 5);
+INSERT INTO t2 VALUES (4, 3);
+INSERT INTO t2 VALUES (5, 4);
+INSERT INTO t2 VALUES (6, 6);
+INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
+include/assert.inc [Count of elements in t1 should be 6.]
+include/diff_tables.inc [master:test.t1 , slave:test.t1]
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
-SELECT * FROM t1 ORDER BY a;
-a	b
-1	1
-2	2
-3	3
-4	4
-5	5
-6	6
+include/assert.inc [Count of elements in t1 should be 6.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
 drop table t1, t2;
 include/rpl_end.inc

mysql-test/suite/rpl/t/rpl_insert_duplicate.test

+#########################################
+# Wrapper for rpl_insert_duplicate.test #
+#########################################
+-- source include/master-slave.inc
+-- source include/have_innodb.inc
+#-- source include/have_binlog_format_mixed_or_statement.inc
+
+let $engine_type=innodb;
+-- source extra/rpl_tests/rpl_insert_duplicate.test
+
+let $engine_type=myisam;
+-- source extra/rpl_tests/rpl_insert_duplicate.test
+
+--source include/rpl_end.inc

mysql-test/suite/rpl/t/rpl_insert_ignore.test

@@ -4,7 +4,11 @@
 -- source include/not_ndb_default.inc
 -- source include/have_innodb.inc
 -- source include/master-slave.inc
-let $engine_type=innodb;
-let $engine_type2=myisam;
+
+-- let $engine_type=innodb
 -- source extra/rpl_tests/rpl_insert_ignore.test
+
+-- let $engine_type=innodb
+-- source extra/rpl_tests/rpl_insert_ignore.test
+
 --source include/rpl_end.inc

sql/sql_insert.cc

@@ -881,7 +881,7 @@ bool mysql_insert(THD *thd,TABLE_LIST *table_list,
       */
       query_cache_invalidate3(thd, table_list, 1);
     }
-    if ((changed && error <= 0) ||
+    if (error <= 0 ||
         thd->transaction.stmt.modified_non_trans_table ||
         was_insert_delayed)
     {