Skip to content

M
MariaDB
Commit 9075973d authored by Rasmus Johansson's avatar Rasmus Johansson
Browse files
Options

MDEV-17812 Use MariaDB in error messages instead of MySQL 

Changed wording in error messages from MySQL to MariaDB. In
cases where the word server could be used instead it was done.

Tests that have these errors recorded were updated.
parent 0eab87ce
Show whitespace changes
Inline Side-by-side
Showing with 92 additions and 91 deletions
mysql-test/suite/binlog/r/binlog_bug23533.result
View file @ 9075973d
......@@ -9,7 +9,7 @@ disconnect default;
connect default,localhost,root,,test;
START TRANSACTION;
CREATE TABLE t2 SELECT * FROM t1;
ERROR HY000: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
ERROR HY000: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage
COMMIT;
SHOW TABLES LIKE 't%';
Tables_in_test (t%)
......
mysql-test/suite/galera/r/galera_binlog_cache_size.result
View file @ 9075973d
......@@ -10,6 +10,6 @@ SET AUTOCOMMIT=ON;
START TRANSACTION;
INSERT INTO t1 SELECT REPEAT('a', 767) FROM ten;
INSERT INTO t1 SELECT REPEAT('a', 767) FROM ten;
ERROR HY000: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
ERROR HY000: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage
DROP TABLE t1;
DROP TABLE ten;
mysql-test/suite/perfschema/r/hostcache_ipv4_blocked.result
View file @ 9075973d
......@@ -117,7 +117,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 192.0.2.4
......@@ -147,7 +147,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 192.0.2.4
......@@ -363,7 +363,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 192.0.2.4
......@@ -393,7 +393,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '192.0.2.4' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 192.0.2.4
......
mysql-test/suite/perfschema/r/hostcache_ipv6_blocked.result
View file @ 9075973d
......@@ -117,7 +117,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 2001:db8::6:6
......@@ -147,7 +147,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 2001:db8::6:6
......@@ -363,7 +363,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 2001:db8::6:6
......@@ -393,7 +393,7 @@ COUNT_LOCAL_ERRORS 0
COUNT_UNKNOWN_ERRORS 0
FIRST_ERROR_SEEN set
LAST_ERROR_SEEN set
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
ERROR HY000: Host '2001:db8::6:6' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'
connection default;
# Dumping performance_schema.host_cache
IP 2001:db8::6:6
......
mysql-test/suite/plugins/r/multiauth.result
View file @ 9075973d
......@@ -154,7 +154,7 @@ CREATE USER for mysqltest1@%
CREATE USER `mysqltest1`@`%` IDENTIFIED VIA mysql_native_password USING '*BFE3F4604CFD21E6595080A261D92EF0183B5971' OR unix_socket
drop user mysqltest1;
create user mysqltest1 identified via ed25519 as password("good") OR unix_socket OR mysql_native_password as password("works");
ERROR HY000: Column count of mysql.user is wrong. Expected 3, found 47. Created with MariaDB XX.YY.ZZ, now running XX.YY.ZZ. Please use mysql_upgrade to fix this error
ERROR HY000: Column count of mysql.user is wrong. Expected 3, found 47. Created with MariaDB XX.YY.ZZ, now running XX.YY.ZZ. Please use mariadb-upgrade to fix this error
create user USER identified via mysql_native_password as '1234567890123456789012345678901234567890a' OR unix_socket;
create user mysqltest1 identified via mysql_native_password as '1234567890123456789012345678901234567890a' OR unix_socket;
update mysql.global_priv set priv=replace(priv, '1234567890123456789012345678901234567890a', 'invalid password');
......
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.result
View file @ 9075973d
......@@ -5,7 +5,7 @@ alter table user drop column default_role;
alter table user drop column max_statement_time;
flush privileges;
create role test_role;
ERROR HY000: Column count of mysql.user is wrong. Expected 45, found 44. Created with MariaDB MYSQL_VERSION_ID, now running MYSQL_VERSION_ID. Please use mysql_upgrade to fix this error
ERROR HY000: Column count of mysql.user is wrong. Expected 45, found 44. Created with MariaDB MYSQL_VERSION_ID, now running MYSQL_VERSION_ID. Please use mariadb-upgrade to fix this error
drop role test_role;
ERROR HY000: Operation DROP ROLE failed for 'test_role'
alter table user add column is_role enum('N', 'Y') default 'N' not null
......
mysql-test/suite/rpl/r/rpl_binlog_rollback_cleanup.result
View file @ 9075973d
......@@ -3,7 +3,7 @@ include/master-slave.inc
connection master;
SET GLOBAL max_binlog_cache_size = 65536;
CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=INNODB;
ERROR HY000: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
ERROR HY000: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage
SET GLOBAL max_binlog_cache_size= ORIGINAL_VALUE;
DROP TABLE t1;
include/rpl_end.inc
mysql-test/suite/rpl/r/rpl_dual_pos_advance.result
View file @ 9075973d
......@@ -20,7 +20,7 @@ insert into t3 values(4);
connection server_1;
start slave until master_log_file="MASTER_LOG_FILE",master_log_pos=MASTER_LOG_POS;
Warnings:
Note 1278 It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart
Note 1278 It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mariadbd restart
include/wait_for_slave_sql_to_stop.inc
show tables;
Tables_in_test
......@@ -28,14 +28,14 @@ t1
t2
start slave until master_log_file="MASTER_LOG_FILE",master_log_pos=MASTER_LOG_POS;
Warnings:
Note 1278 It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart
Note 1278 It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mariadbd restart
include/wait_for_slave_sql_to_stop.inc
select * from t3;
n
1
start slave until master_log_file="MASTER_LOG_FILE",master_log_pos=MASTER_LOG_POS;
Warnings:
Note 1278 It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart
Note 1278 It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mariadbd restart
include/wait_for_slave_sql_to_stop.inc
select * from t3;
n
......
sql-common/errmsg.c
View file @ 9075973d
/* Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.
Copyright (C) 2020, MariaDB Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......@@ -25,20 +26,20 @@
const char *client_errors[]=
{
"Unknown MySQL error",
"Unknown error",
"Can't create UNIX socket (%d)",
"Can't connect to local MySQL server through socket '%-.100s' (%M)",
"Can't connect to MySQL server on '%-.100s' (%M)",
"Can't connect to local server through socket '%-.100s' (%M)",
"Can't connect to server on '%-.100s' (%M)",
"Can't create TCP/IP socket (%M)",
"Unknown MySQL server host '%-.100s' (%d)",
"MySQL server has gone away",
"Unknown server host '%-.100s' (%d)",
"Server has gone away",
"Protocol mismatch; server version = %d, client version = %d",
"MySQL client ran out of memory",
"MariaDB client ran out of memory",
"Wrong host info",
"Localhost via UNIX socket",
"%-.100s via TCP/IP",
"Error in server handshake",
"Lost connection to MySQL server during query",
"Lost connection to server during query",
"Commands out of sync; you can't run this command now",
"Named pipe: %-.32s",
"Can't wait for named pipe to host: %-.64s pipe: %-.32s (%lu)",
......@@ -53,7 +54,7 @@ const char *client_errors[]=
"Error connecting to master:",
"SSL connection error: %-.100s",
"Malformed packet",
"This client library is licensed only for use with MySQL servers having '%s' license",
"This client library is licensed only for use with servers having '%s' license",
"Invalid use of null pointer",
"Statement not prepared",
"No data supplied for parameters in prepared statement",
......@@ -80,7 +81,7 @@ const char *client_errors[]=
"Prepared statement contains no metadata",
"Attempt to read a row while there is no result set associated with the statement",
"This feature is not implemented yet",
"Lost connection to MySQL server at '%s', system error: %M",
"Lost connection to server at '%s', system error: %M",
"Statement closed indirectly because of a preceding %s() call",
"The number of columns in the result set differs from the number of bound buffers. You must reset the statement, rebind the result set columns, and execute the statement again",
"This handle is already connected. Use a separate handle for each connection.",
......
sql/share/errmsg-utf8.txt
View file @ 9075973d
......@@ -951,7 +951,7 @@ ER_CON_COUNT_ERROR 08004
ER_OUT_OF_RESOURCES
cze "Málo prostoru/paměti pro thread"
dan "Udgået for tråde/hukommelse"
nla "Geen thread geheugen meer; controleer of mysqld of andere processen al het beschikbare geheugen gebruikt. Zo niet, dan moet u wellicht 'ulimit' gebruiken om mysqld toe te laten meer geheugen te benutten, of u kunt extra swap ruimte toevoegen"
nla "Geen thread geheugen meer; controleer of mariadbd of andere processen al het beschikbare geheugen gebruikt. Zo niet, dan moet u wellicht 'ulimit' gebruiken om mariadbd toe te laten meer geheugen te benutten, of u kunt extra swap ruimte toevoegen"
eng "Out of memory."
est "Mälu sai otsa. Võimalik, et aitab swap-i lisamine või käsu 'ulimit' abil MariaDB-le rohkema mälu kasutamise lubamine"
fre "Manque de 'threads'/mémoire"
......@@ -959,7 +959,7 @@ ER_OUT_OF_RESOURCES
greek "Πρόβλημα με τη διαθέσιμη μνήμη (Out of thread space/memory)"
hun "Elfogyott a thread-memoria"
ita "Fine dello spazio/memoria per i thread"
jpn "メモリが不足しています。mysqld やその他のプロセスがメモリーを使い切っていないか確認して下さい。メモリーを使い切っていない場合、'ulimit'の設定等で mysqld のメモリー使用最大量を多くするか、スワップ領域を増やす必要があるかもしれません。"
jpn "メモリが不足しています。mariadbd やその他のプロセスがメモリーを使い切っていないか確認して下さい。メモリーを使い切っていない場合、'ulimit'の設定等で mariadbd のメモリー使用最大量を多くするか、スワップ領域を増やす必要があるかもしれません。"
# This message failed to convert from euc-kr, skipped
nor "Tomt for tråd plass/minne"
norwegian-ny "Tomt for tråd plass/minne"
......@@ -2782,25 +2782,25 @@ ER_TOO_BIG_ROWSIZE 42000
swe "För stor total radlängd. Den högst tillåtna radlängden, förutom BLOBs, är %ld. Ändra några av dina fält till BLOB"
ukr "Задовга строка. Найбільшою довжиною строки, не рахуючи BLOB, є %ld. Вам потрібно привести деякі стовбці до типу BLOB"
ER_STACK_OVERRUN
cze "Přetečení zásobníku threadu: použito %ld z %ld. Použijte 'mysqld --thread_stack=#' k zadání většího zásobníku"
dan "Thread stack brugt: Brugt: %ld af en %ld stak. Brug 'mysqld --thread_stack=#' for at allokere en større stak om nødvendigt"
nla "Thread stapel overrun: Gebruikte: %ld van een %ld stack. Gebruik 'mysqld --thread_stack=#' om een grotere stapel te definieren (indien noodzakelijk)"
eng "Thread stack overrun: Used: %ld of a %ld stack. Use 'mysqld --thread_stack=#' to specify a bigger stack if needed"
fre "Débordement de la pile des tâches (Thread stack). Utilisées: %ld pour une pile de %ld. Essayez 'mysqld --thread_stack=#' pour indiquer une plus grande valeur"
ger "Thread-Stack-Überlauf. Benutzt: %ld von %ld Stack. 'mysqld --thread_stack=#' verwenden, um bei Bedarf einen größeren Stack anzulegen"
greek "Stack overrun στο thread: Used: %ld of a %ld stack. Παρακαλώ χρησιμοποιείστε 'mysqld --thread_stack=#' για να ορίσετε ένα μεγαλύτερο stack αν χρειάζεται"
hun "Thread verem tullepes: Used: %ld of a %ld stack. Hasznalja a 'mysqld --thread_stack=#' nagyobb verem definialasahoz"
ita "Thread stack overrun: Usati: %ld di uno stack di %ld. Usa 'mysqld --thread_stack=#' per specificare uno stack piu` grande"
jpn "スレッドスタック不足です(使用: %ld ; サイズ: %ld)。必要に応じて、より大きい値で 'mysqld --thread_stack=#' の指定をしてください。"
kor "쓰레드 스택이 넘쳤습니다. 사용: %ld개 스택: %ld개. 만약 필요시 더큰 스택을 원할때에는 'mysqld --thread_stack=#' 를 정의하세요"
por "Estouro da pilha do 'thread'. Usados %ld de uma pilha de %ld. Use 'mysqld --thread_stack=#' para especificar uma pilha maior, se necessário"
rum "Stack-ul thread-ului a fost depasit (prea mic): Folositi: %ld intr-un stack de %ld. Folositi 'mysqld --thread_stack=#' ca sa specifici un stack mai mare"
rus "Стек потоков переполнен: использовано: %ld из %ld стека. Применяйте 'mysqld --thread_stack=#' для указания большего размера стека, если необходимо"
serbian "Prepisivanje thread stack-a: Upotrebljeno: %ld od %ld stack memorije. Upotrebite 'mysqld --thread_stack=#' da navedete veći stack ako je potrebno"
slo "Pretečenie zásobníku vlákna: použité: %ld z %ld. Použite 'mysqld --thread_stack=#' k zadaniu väčšieho zásobníka"
spa "Sobrecarga de la pila de thread: Usada: %ld de una %ld pila. Use 'mysqld --thread_stack=#' para especificar una mayor pila si necesario"
swe "Trådstacken tog slut: Har använt %ld av %ld bytes. Använd 'mysqld --thread_stack=#' ifall du behöver en större stack"
ukr "Стек гілок переповнено: Використано: %ld з %ld. Використовуйте 'mysqld --thread_stack=#' аби зазначити більший стек, якщо необхідно"
cze "Přetečení zásobníku threadu: použito %ld z %ld. Použijte 'mariadbd --thread_stack=#' k zadání většího zásobníku"
dan "Thread stack brugt: Brugt: %ld af en %ld stak. Brug 'mariadbd --thread_stack=#' for at allokere en større stak om nødvendigt"
nla "Thread stapel overrun: Gebruikte: %ld van een %ld stack. Gebruik 'mariadbd --thread_stack=#' om een grotere stapel te definieren (indien noodzakelijk)"
eng "Thread stack overrun: Used: %ld of a %ld stack. Consider increasing the thread_stack system variable"
fre "Débordement de la pile des tâches (Thread stack). Utilisées: %ld pour une pile de %ld. Essayez 'mariadbd --thread_stack=#' pour indiquer une plus grande valeur"
ger "Thread-Stack-Überlauf. Benutzt: %ld von %ld Stack. 'mariadbd --thread_stack=#' verwenden, um bei Bedarf einen größeren Stack anzulegen"
greek "Stack overrun στο thread: Used: %ld of a %ld stack. Παρακαλώ χρησιμοποιείστε 'mariadbd --thread_stack=#' για να ορίσετε ένα μεγαλύτερο stack αν χρειάζεται"
hun "Thread verem tullepes: Used: %ld of a %ld stack. Hasznalja a 'mariadbd --thread_stack=#' nagyobb verem definialasahoz"
ita "Thread stack overrun: Usati: %ld di uno stack di %ld. Usa 'maridbd --thread_stack=#' per specificare uno stack piu` grande"
jpn "スレッドスタック不足です(使用: %ld ; サイズ: %ld)。必要に応じて、より大きい値で 'mariadbd --thread_stack=#' の指定をしてください。"
kor "쓰레드 스택이 넘쳤습니다. 사용: %ld개 스택: %ld개. 만약 필요시 더큰 스택을 원할때에는 'mariadbd --thread_stack=#' 를 정의하세요"
por "Estouro da pilha do 'thread'. Usados %ld de uma pilha de %ld. Use 'mariadbd --thread_stack=#' para especificar uma pilha maior, se necessário"
rum "Stack-ul thread-ului a fost depasit (prea mic): Folositi: %ld intr-un stack de %ld. Folositi 'mariadbd --thread_stack=#' ca sa specifici un stack mai mare"
rus "Стек потоков переполнен: использовано: %ld из %ld стека. Применяйте 'mariadbd --thread_stack=#' для указания большего размера стека, если необходимо"
serbian "Prepisivanje thread stack-a: Upotrebljeno: %ld od %ld stack memorije. Upotrebite 'mariadbd --thread_stack=#' da navedete veći stack ako je potrebno"
slo "Pretečenie zásobníku vlákna: použité: %ld z %ld. Použite 'mariadbd --thread_stack=#' k zadaniu väčšieho zásobníka"
spa "Sobrecarga de la pila de thread: Usada: %ld de una %ld pila. Use 'mariadbd --thread_stack=#' para especificar una mayor pila si necesario"
swe "Trådstacken tog slut: Har använt %ld av %ld bytes. Använd 'mariadbd --thread_stack=#' ifall du behöver en större stack"
ukr "Стек гілок переповнено: Використано: %ld з %ld. Використовуйте 'mariadbd --thread_stack=#' аби зазначити більший стек, якщо необхідно"
ER_WRONG_OUTER_JOIN 42000
cze "V OUTER JOIN byl nalezen křížový odkaz. Prověřte ON podmínky"
dan "Krydsreferencer fundet i OUTER JOIN; check dine ON conditions"
......@@ -2979,26 +2979,26 @@ ER_FUNCTION_NOT_DEFINED
swe "Funktionen '%-.192s' är inte definierad"
ukr "Функцію '%-.192s' не визначено"
ER_HOST_IS_BLOCKED
cze "Stroj '%-.64s' je zablokován kvůli mnoha chybám při připojování. Odblokujete použitím 'mysqladmin flush-hosts'"
dan "Værten '%-.64s' er blokeret på grund af mange fejlforespørgsler. Lås op med 'mysqladmin flush-hosts'"
nla "Host '%-.64s' is geblokkeeerd vanwege te veel verbindings fouten. Deblokkeer met 'mysqladmin flush-hosts'"
eng "Host '%-.64s' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'"
est "Masin '%-.64s' on blokeeritud hulgaliste ühendusvigade tõttu. Blokeeringu saab tühistada 'mysqladmin flush-hosts' käsuga"
fre "L'hôte '%-.64s' est bloqué à cause d'un trop grand nombre d'erreur de connexion. Débloquer le par 'mysqladmin flush-hosts'"
ger "Host '%-.64s' blockiert wegen zu vieler Verbindungsfehler. Aufheben der Blockierung mit 'mysqladmin flush-hosts'"
greek "Ο υπολογιστής '%-.64s' έχει αποκλεισθεί λόγω πολλαπλών λαθών σύνδεσης. Προσπαθήστε να διορώσετε με 'mysqladmin flush-hosts'"
hindi "होस्ट '%-.64s' को कई कनेक्शन में त्रुटियों के कारण ब्लॉक कर दिया गया है; 'mysqladmin flush-hosts' का इस्तेमाल कर अनब्लॉक करें"
hun "A '%-.64s' host blokkolodott, tul sok kapcsolodasi hiba miatt. Hasznalja a 'mysqladmin flush-hosts' parancsot"
ita "Sistema '%-.64s' bloccato a causa di troppi errori di connessione. Per sbloccarlo: 'mysqladmin flush-hosts'"
jpn "接続エラーが多いため、ホスト '%-.64s' は拒否されました。'mysqladmin flush-hosts' で解除できます。"
kor "너무 많은 연결오류로 인하여 호스트 '%-.64s'는 블락되었습니다. 'mysqladmin flush-hosts'를 이용하여 블락을 해제하세요"
por "'Host' '%-.64s' está bloqueado devido a muitos erros de conexão. Desbloqueie com 'mysqladmin flush-hosts'"
rum "Host-ul '%-.64s' e blocat din cauza multelor erori de conectie. Poti deploca folosind 'mysqladmin flush-hosts'"
rus "Хост '%-.64s' заблокирован из-за слишком большого количества ошибок соединения. Разблокировать его можно с помощью 'mysqladmin flush-hosts'"
serbian "Host '%-.64s' je blokiran zbog previše grešaka u konekciji. Možete ga odblokirati pomoću komande 'mysqladmin flush-hosts'"
spa "Servidor '%-.64s' está bloqueado por muchos errores de conexión. Desbloquear con 'mysqladmin flush-hosts'"
swe "Denna dator, '%-.64s', är blockerad pga många felaktig paket. Gör 'mysqladmin flush-hosts' för att ta bort alla blockeringarna"
ukr "Хост '%-.64s' заблоковано з причини великої кількості помилок з'єднання. Для розблокування використовуйте 'mysqladmin flush-hosts'"
cze "Stroj '%-.64s' je zablokován kvůli mnoha chybám při připojování. Odblokujete použitím 'mariadb-admin flush-hosts'"
dan "Værten '%-.64s' er blokeret på grund af mange fejlforespørgsler. Lås op med 'mariadb-admin flush-hosts'"
nla "Host '%-.64s' is geblokkeeerd vanwege te veel verbindings fouten. Deblokkeer met 'mariadb-admin flush-hosts'"
eng "Host '%-.64s' is blocked because of many connection errors; unblock with 'mariadb-admin flush-hosts'"
est "Masin '%-.64s' on blokeeritud hulgaliste ühendusvigade tõttu. Blokeeringu saab tühistada 'mariadb-admin flush-hosts' käsuga"
fre "L'hôte '%-.64s' est bloqué à cause d'un trop grand nombre d'erreur de connexion. Débloquer le par 'mariadb-admin flush-hosts'"
ger "Host '%-.64s' blockiert wegen zu vieler Verbindungsfehler. Aufheben der Blockierung mit 'mariadb-admin flush-hosts'"
greek "Ο υπολογιστής '%-.64s' έχει αποκλεισθεί λόγω πολλαπλών λαθών σύνδεσης. Προσπαθήστε να διορώσετε με 'mariadb-admin flush-hosts'"
hindi "होस्ट '%-.64s' को कई कनेक्शन में त्रुटियों के कारण ब्लॉक कर दिया गया है; 'mariadb-admin flush-hosts' का इस्तेमाल कर अनब्लॉक करें"
hun "A '%-.64s' host blokkolodott, tul sok kapcsolodasi hiba miatt. Hasznalja a 'mariadb-admin flush-hosts' parancsot"
ita "Sistema '%-.64s' bloccato a causa di troppi errori di connessione. Per sbloccarlo: 'mariadb-admin flush-hosts'"
jpn "接続エラーが多いため、ホスト '%-.64s' は拒否されました。'mariadb-admin flush-hosts' で解除できます。"
kor "너무 많은 연결오류로 인하여 호스트 '%-.64s'는 블락되었습니다. 'mariadb-admin flush-hosts'를 이용하여 블락을 해제하세요"
por "'Host' '%-.64s' está bloqueado devido a muitos erros de conexão. Desbloqueie com 'mariadb-admin flush-hosts'"
rum "Host-ul '%-.64s' e blocat din cauza multelor erori de conectie. Poti deploca folosind 'mariadb-admin flush-hosts'"
rus "Хост '%-.64s' заблокирован из-за слишком большого количества ошибок соединения. Разблокировать его можно с помощью 'mariadb-admin flush-hosts'"
serbian "Host '%-.64s' je blokiran zbog previše grešaka u konekciji. Možete ga odblokirati pomoću komande 'mariadb-admin flush-hosts'"
spa "Servidor '%-.64s' está bloqueado por muchos errores de conexión. Desbloquear con 'mariadb-admin flush-hosts'"
swe "Denna dator, '%-.64s', är blockerad pga många felaktig paket. Gör 'mariadb-admin flush-hosts' för att ta bort alla blockeringarna"
ukr "Хост '%-.64s' заблоковано з причини великої кількості помилок з'єднання. Для розблокування використовуйте 'mariadb-admin flush-hosts'"
ER_HOST_NOT_PRIVILEGED
cze "Stroj '%-.64s' nemá povoleno se k tomuto MariaDB serveru připojit"
dan "Værten '%-.64s' kan ikke tilkoble denne MariaDB-server"
......@@ -3043,7 +3043,7 @@ ER_PASSWORD_ANONYMOUS_USER 42000
ukr "Ви використовуєте MariaDB як анонімний користувач, тому вам не дозволено змінювати паролі"
ER_PASSWORD_NOT_ALLOWED 42000
cze "Na změnu hesel ostatním musíte mít právo provést update tabulek v databázi mysql"
dan "Du skal have tilladelse til at opdatere tabeller i MariaDB databasen for at ændre andres adgangskoder"
dan "Du skal have tilladelse til at opdatere tabeller i mysql databasen for at ændre andres adgangskoder"
nla "U moet tabel update priveleges hebben in de mysql database om wachtwoorden voor anderen te mogen wijzigen"
eng "You must have privileges to update tables in the mysql database to be able to change passwords for others"
est "Teiste paroolide muutmiseks on nõutav tabelite muutmisõigus 'mysql' andmebaasis"
......@@ -3893,7 +3893,7 @@ ER_NO_RAID_COMPILED
ger "Diese MariaDB-Version ist nicht mit RAID-Unterstützung kompiliert"
hindi "MariaDB का यह संस्करण RAID सपोर्ट के साथ कॉम्पाईल्ड नहीं है"
hun "Ezen leforditott MariaDB verzio nem tartalmaz RAID support-ot"
ita "Questa versione di MYSQL non e` compilata con il supporto RAID"
ita "Questa versione di MariaDB non e` compilata con il supporto RAID"
jpn "このバージョンのMariaDBはRAIDサポートを含めてコンパイルされていません。"
por "Esta versão do MariaDB não foi compilada com suporte a RAID"
rum "Aceasta versiune de MariaDB, nu a fost compilata cu suport pentru RAID"
......@@ -4254,18 +4254,18 @@ ER_WARNING_NOT_COMPLETE_ROLLBACK
ukr "Застереження: Деякі нетранзакційні зміни таблиць не можна буде повернути"
ER_TRANS_CACHE_FULL
dan "Fler-udtryks transaktion krævede mere plads en 'max_binlog_cache_size' bytes. Forhøj værdien af denne variabel og prøv igen"
nla "Multi-statement transactie vereist meer dan 'max_binlog_cache_size' bytes opslag. Verhoog deze mysqld variabele en probeer opnieuw"
eng "Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again"
nla "Multi-statement transactie vereist meer dan 'max_binlog_cache_size' bytes opslag. Verhoog deze mariadbd variabele en probeer opnieuw"
eng "Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage"
est "Mitme lausendiga transaktsioon nõudis rohkem ruumi kui lubatud 'max_binlog_cache_size' muutujaga. Suurenda muutuja väärtust ja proovi uuesti"
fre "Cette transaction à commandes multiples nécessite plus de 'max_binlog_cache_size' octets de stockage, augmentez cette variable de mysqld et réessayez"
fre "Cette transaction à commandes multiples nécessite plus de 'max_binlog_cache_size' octets de stockage, augmentez cette variable de mariadbd et réessayez"
ger "Transaktionen, die aus mehreren Befehlen bestehen, benötigten mehr als 'max_binlog_cache_size' Bytes an Speicher. Btte vergrössern Sie diese Server-Variable versuchen Sie es noch einmal"
ita "La transazione a comandi multipli (multi-statement) ha richiesto piu` di 'max_binlog_cache_size' bytes di disco: aumentare questa variabile di mysqld e riprovare"
ita "La transazione a comandi multipli (multi-statement) ha richiesto piu` di 'max_binlog_cache_size' bytes di disco: aumentare questa variabile di mariadbd e riprovare"
jpn "複数ステートメントから成るトランザクションが 'max_binlog_cache_size' 以上の容量を必要としました。このシステム変数を増加して、再試行してください。"
por "Transações multi-declaradas (multi-statement transactions) requeriram mais do que o valor limite (max_binlog_cache_size) de bytes para armazenagem. Aumente o valor desta variável do mysqld e tente novamente"
rus "Транзакции, включающей большое количество команд, потребовалось более чем 'max_binlog_cache_size' байт. Увеличьте эту переменную сервера mysqld и попробуйте еще раз"
spa "Multipla transición necesita mas que 'max_binlog_cache_size' bytes de almacenamiento. Aumente esta variable mysqld y tente de nuevo"
swe "Transaktionen krävde mera än 'max_binlog_cache_size' minne. Öka denna mysqld-variabel och försök på nytt"
ukr "Транзакція з багатьма виразами вимагає більше ніж 'max_binlog_cache_size' байтів для зберігання. Збільште цю змінну mysqld та спробуйте знову"
por "Transações multi-declaradas (multi-statement transactions) requeriram mais do que o valor limite (max_binlog_cache_size) de bytes para armazenagem. Aumente o valor desta variável do mariadbd e tente novamente"
rus "Транзакции, включающей большое количество команд, потребовалось более чем 'max_binlog_cache_size' байт. Увеличьте эту переменную сервера mariadbd и попробуйте еще раз"
spa "Multipla transición necesita mas que 'max_binlog_cache_size' bytes de almacenamiento. Aumente esta variable mariadbd y tente de nuevo"
swe "Transaktionen krävde mera än 'max_binlog_cache_size' minne. Öka denna mariadbd-variabel och försök på nytt"
ukr "Транзакція з багатьма виразами вимагає більше ніж 'max_binlog_cache_size' байтів для зберігання. Збільште цю змінну mariadbd та спробуйте знову"
ER_SLAVE_MUST_STOP
dan "Denne handling kunne ikke udføres med kørende slave '%2$*1$s', brug først kommandoen STOP SLAVE '%2$*1$s'"
nla "Deze operatie kan niet worden uitgevoerd met een actieve slave '%2$*1$s', doe eerst STOP SLAVE '%2$*1$s'"
......@@ -5044,11 +5044,11 @@ ER_BAD_SLAVE_UNTIL_COND
por "Parâmetro ou combinação de parâmetros errado para START SLAVE UNTIL"
spa "Parametro equivocado o combinación de parametros para START SLAVE UNTIL"
ER_MISSING_SKIP_SLAVE
eng "It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart"
eng "It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mariadbd restart"
ger "Es wird empfohlen, mit --skip-slave-start zu starten, wenn mit START SLAVE UNTIL eine Schritt-für-Schritt-Replikation ausgeführt wird. Ansonsten gibt es Probleme, wenn ein Slave-Server unerwartet neu startet"
jpn "START SLAVE UNTIL で段階的にレプリケーションを行う際には、--skip-slave-start オプションを使うことを推奨します。使わない場合、スレーブのmysqldが不慮の再起動をすると問題が発生します。"
por "É recomendado para rodar com --skip-slave-start quando fazendo replicação passo-por-passo com START SLAVE UNTIL, de outra forma você não está seguro em caso de inesperada reinicialição do mysqld escravo"
spa "Es recomendado rodar con --skip-slave-start cuando haciendo replicación step-by-step con START SLAVE UNTIL, a menos que usted no esté seguro en caso de inesperada reinicialización del mysqld slave"
jpn "START SLAVE UNTIL で段階的にレプリケーションを行う際には、--skip-slave-start オプションを使うことを推奨します。使わない場合、スレーブのmariadbdが不慮の再起動をすると問題が発生します。"
por "É recomendado para rodar com --skip-slave-start quando fazendo replicação passo-por-passo com START SLAVE UNTIL, de outra forma você não está seguro em caso de inesperada reinicialição do mariadbd escravo"
spa "Es recomendado rodar con --skip-slave-start cuando haciendo replicación step-by-step con START SLAVE UNTIL, a menos que usted no esté seguro en caso de inesperada reinicialización del mariadbd slave"
ER_UNTIL_COND_IGNORED
eng "SQL thread is not to be started so UNTIL options are ignored"
ger "SQL-Thread soll nicht gestartet werden. Daher werden UNTIL-Optionen ignoriert"
......@@ -5651,9 +5651,9 @@ ER_TRG_IN_WRONG_SCHEMA
eng "Trigger in wrong schema"
ger "Trigger im falschen Schema"
ER_STACK_OVERRUN_NEED_MORE
eng "Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Use 'mysqld --thread_stack=#' to specify a bigger stack"
ger "Thread-Stack-Überlauf: %ld Bytes eines %ld-Byte-Stacks in Verwendung, und %ld Bytes benötigt. Verwenden Sie 'mysqld --thread_stack=#', um einen größeren Stack anzugeben"
jpn "スレッドスタック不足です(使用: %ld ; サイズ: %ld ; 要求: %ld)。より大きい値で 'mysqld --thread_stack=#' の指定をしてください。"
eng "Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Consider increasing the thread_stack system variable."
ger "Thread-Stack-Überlauf: %ld Bytes eines %ld-Byte-Stacks in Verwendung, und %ld Bytes benötigt. Verwenden Sie 'mariadbd --thread_stack=#', um einen größeren Stack anzugeben"
jpn "スレッドスタック不足です(使用: %ld ; サイズ: %ld ; 要求: %ld)。より大きい値で 'mariadbd --thread_stack=#' の指定をしてください。"
ER_TOO_LONG_BODY 42000 S1009
eng "Routine body for '%-.100s' is too long"
ger "Routinen-Body für '%-.100s' ist zu lang"
......@@ -6068,8 +6068,8 @@ ER_CANT_LOCK_LOG_TABLE
ER_UNUSED_4
eng "You should never see it"
ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE
eng "Column count of mysql.%s is wrong. Expected %d, found %d. Created with MariaDB %d, now running %d. Please use mysql_upgrade to fix this error"
ger "Spaltenanzahl von mysql.%s falsch. %d erwartet, aber %d erhalten. Erzeugt mit MariaDB %d, jetzt unter %d. Bitte benutzen Sie mysql_upgrade, um den Fehler zu beheben"
eng "Column count of mysql.%s is wrong. Expected %d, found %d. Created with MariaDB %d, now running %d. Please use mariadb-upgrade to fix this error"
ger "Spaltenanzahl von mysql.%s falsch. %d erwartet, aber %d erhalten. Erzeugt mit MariaDB %d, jetzt unter %d. Bitte benutzen Sie mariadb-upgrade, um den Fehler zu beheben"
ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR
eng "Cannot switch out of the row-based binary log format when the session has open temporary tables"
ger "Kann nicht aus dem zeilenbasierten Binärlog-Format herauswechseln, wenn die Sitzung offene temporäre Tabellen hat"
......@@ -6563,13 +6563,13 @@ ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX
eng "The requested value for the heartbeat period exceeds the value of `slave_net_timeout' seconds. A sensible value for the period should be less than the timeout"
ER_STMT_CACHE_FULL
eng "Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage; increase this mysqld variable and try again"
eng "Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage."
ER_MULTI_UPDATE_KEY_CONFLICT
eng "Primary key/partition key update is not allowed since the table is updated both as '%-.192s' and '%-.192s'"
# When translating this error message make sure to include "ALTER TABLE" in the
# message as mysqlcheck parses the error message looking for ALTER TABLE.
# message as mariadb-check parses the error message looking for ALTER TABLE.
ER_TABLE_NEEDS_REBUILD
eng "Table rebuild required. Please do \"ALTER TABLE %`s FORCE\" or dump/reload to fix it!"
......@@ -7377,8 +7377,8 @@ ER_FK_DEPTH_EXCEEDED
eng "Foreign key cascade delete/update exceeds max depth of %d."
ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE_V2
eng "Column count of %s.%s is wrong. Expected %d, found %d. Created with MariaDB %d, now running %d. Please use mysql_upgrade to fix this error."
ger "Spaltenanzahl von %s.%s falsch. %d erwartet, aber %d erhalten. Erzeugt mit MariaDB %d, jetzt unter %d. Bitte benutzen Sie mysql_upgrade, um den Fehler zu beheben"
eng "Column count of %s.%s is wrong. Expected %d, found %d. Created with MariaDB %d, now running %d. Please use mariadb-upgrade to fix this error."
ger "Spaltenanzahl von %s.%s falsch. %d erwartet, aber %d erhalten. Erzeugt mit MariaDB %d, jetzt unter %d. Bitte benutzen Sie mariadb-upgrade, um den Fehler zu beheben"
ER_WARN_TRIGGER_DOESNT_HAVE_CREATED
eng "Trigger %s.%s.%s does not have CREATED attribute."
......@@ -7764,7 +7764,7 @@ ER_UNKNOWN_SEQUENCES 42S02
ER_UNKNOWN_VIEW 42S02
eng "Unknown VIEW: '%-.300s'"
ER_WRONG_INSERT_INTO_SEQUENCE
eng "Wrong INSERT into a SEQUENCE. One can only do single table INSERT into a sequence object (like with mysqldump). If you want to change the SEQUENCE, use ALTER SEQUENCE instead."
eng "Wrong INSERT into a SEQUENCE. One can only do single table INSERT into a sequence object (like with mariadb-dump). If you want to change the SEQUENCE, use ALTER SEQUENCE instead."
ER_SP_STACK_TRACE
eng "At line %u in %s"
ER_PACKAGE_ROUTINE_IN_SPEC_NOT_DEFINED_IN_BODY
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7