Merge rkalimullin@bk-internal.mysql.com:/home/bk/mysql-4.0

into gw.mysql.r18.ru:/usr/home/ram/work/4.0.b2298

Build-tools/Do-rpm

@@ -115,10 +115,12 @@ if (defined $opt_log)
 if (-x "/usr/bin/rpmbuild")
 {
 	$RPM= "/usr/bin/rpmbuild";
+	$RMSOURCE= "--rmsource --rmspec";
 }
 else
 {
 	$RPM= "/bin/rpm";
+	$RMSOURCE= "--rmspec";
 }
 
 if ($RPM)
@@ -177,7 +179,7 @@ $ENV{MYSQL_BUILD_CXX}=$opt_cxx if ($opt_cxx);
 $command= "$RPM";
 $command.= " -v" if ($opt_verbose);
 $command.= " -ba";
-$command.= " --clean" if $opt_clean;
+$command.= " --clean $RMSOURCE" if $opt_clean;
 $command.= " $SPECDIR/";
 $command.= basename($SPECFILE);
 &logger("Building RPM.");
@@ -198,19 +200,6 @@ $command.= " $RPMDIR/$RPMARCH/MySQL*$VERSION*.$RPMARCH.rpm $PWD";
 &logger("Moving binary RPMs to current dir.");
 &run_command($command, "Error moving binary RPMs!");
 
-#
-# Clean up
-#
-if ($opt_clean)
-{
-	&logger("Removing spec file and source package");
-	unless ($opt_dry_run)
-	{
-		unlink("$SPECDIR/" . basename($SPECFILE));
-		unlink("$SOURCEDIR/$SOURCEFILE");
-	}
-}
-
 &logger("SUCCESS: RPM files successfully created.") unless ($opt_dry_run);
 exit 0;
 

man/Makefile.am

@@ -21,7 +21,26 @@ man_MANS =	mysql.1 isamchk.1 isamlog.1 mysql_zap.1 mysqlaccess.1 \
 		mysqladmin.1 mysqld.1 mysqld_multi.1 mysqldump.1 mysqlshow.1 \
 		perror.1 replace.1 mysqld_safe.1 mysql_fix_privilege_tables.1
 
-EXTRA_DIST =	$(man_MANS)
+EXTRA_DIST =	mysql.1.in isamchk.1.in isamlog.1.in mysql_zap.1.in \
+		mysqlaccess.1.in mysqladmin.1.in mysqld.1.in mysqld_multi.1.in \
+		mysqldump.1.in mysqlshow.1.in perror.1.in replace.1.in \
+		mysqld_safe.1.in mysql_fix_privilege_tables.1.in
+
+CLEANFILES = $(man_MANS)
+
+SUFFIXES = .in
+
+.in:
+	@RM@ -f $@ $@-t
+	@SED@ \
+	  -e 's!@''MYSQL_BASE_VERSION''@!@MYSQL_BASE_VERSION@!' \
+	  -e 's!@''sysconfdir''@!@sysconfdir@!' \
+	  -e 's!@''bindir''@!$(bindir)!g' \
+	  -e 's!@''libexecdir''@!$(libexecdir)!g' \
+	  -e 's!@''localstatedir''@!$(localstatedir)!g' \
+	  -e 's!@''MYSQL_NO_DASH_VERSION''@!@MYSQL_NO_DASH_VERSION@!' \
+	$< > $@-t
+	@MV@ $@-t $@
 
 # Don't update the files from bitkeeper
 %::SCCS/s.%

man/isamchk.1 → man/isamchk.1.in

-.TH isamchk 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH isamchk 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 .BR isamchk
  \- Description, check and repair of ISAM tables.
@@ -114,24 +114,29 @@ Print version and exit.
 .BR    \-w | \-\-wait
 Wait if table is locked.
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill\-9.dk), Mercurmedia Data Model Architect /

man/isamlog.1 → man/isamlog.1.in

-.TH isamlog 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH isamlog 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME 
 isamlog - Write info about whats in a nisam log file. 
 .SH USAGE 
@@ -71,27 +71,31 @@ If one gives table names as arguments only these tables will be updated
 
 
 .SH "SEE ALSO" 
-
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 
 .SH AUTHOR 
 
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill-9.dk), Mercurmedia Data Model Architect /

man/mysql.1 → man/mysql.1.in

-.TH mysql 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH mysql 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 mysql \- text-based client for mysqld, a SQL-based relational database daemon
+.SH USAGE
+mysql [OPTIONS] [Database]
 .SH SYNOPSIS
 .B mysql
 .RB [ \-B | \-\-batch ]
@@ -105,16 +107,19 @@ version number and exit.
 Wait and retry if the database server connection is down.
 .SH FILES
 .TP 2.2i
-.I /depot/bin/mysql
-executable
+.I @sysconfdir@/my.cnf
+MySQL configuration file
 .TP
-.I /depot/bin/mysqld
-executable
+.I @bindir@/mysql
+Client executable
 .TP
-.I /depot/bin/mysqld_safe
+.I @libexecdir@/mysqld
+Server executable
+.TP
+.I @bindir@/mysqld_safe
 executable shell script for starting mysqld safely
 .TP
-.I /site/var/mysql/data
+.I @localstatedir@
 location of database files
 .SH EXAMPLE
 You can also read a backup dump file back into MySQL with: 
@@ -124,24 +129,29 @@ You can also read a backup dump file back into MySQL with:
 .BR < 
 backup-file.sql
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 6.3, distribution 3.20.20
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 6.3, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/)
 This software comes with no warranty.
 Manual page by R. P. C. Rodgers,
 Lister Hill National Center for Biomedical Communication,

man/mysql_fix_privilege_tables.1 → man/mysql_fix_privilege_tables.1.in

-.TH mysql 1 "17 March 2003" "MySQL 4.0" "MySQL database"
+.TH mysql 1 "17 March 2003" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 mysql_fix_privilege_tables \- Fixes MySQL privilege tables.
 .SH SYNOPSIS
@@ -14,7 +14,25 @@ If you get 'Access denied' errors, run the script again
 and give the MySQL root user password as an argument.
 
 .SH "SEE ALSO"
-mysql (1), mysqld (1)
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
 This manpage was written by Christian Hammers <ch@debian.org>.
 

man/mysql_zap.1 → man/mysql_zap.1.in

-.TH zap 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH zap 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME 
 zap - a perl script used to kill processes 
 .SH USAGE 
@@ -28,7 +28,25 @@ isn't given, ask user for confirmation for each process to kill. If signal isn't
 .BR -t 
 is given the processes is only shown on stdout.
 .SH "SEE ALSO" 
-isamchk (1), isamlog (1), mysqlaccess (1), mysqladmin (1), mysqlbug (1), mysqld (1), mysqldump (1), mysqlshow (1), msql2mysql (1), perror (1), replace (1), mysqld_safe (1), which1 (1), zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR 
-Ver 1.0, distribution 3.23.29a Michael (Monty) Widenius (monty@tcx.se), TCX Datakonsult AB (http://www.tcx.se). This software comes with no warranty. Manual page by L. (Kill-9) Pedersen (kill-9@kill-9.dk), Mercurmedia Data Model Architect / system developer (http://www.mercurmedia.com) 
-.\" end of man page 
\ No newline at end of file
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@ Michael (Monty) Widenius (monty@mysql.com), MySQL AB (http://www.mysql.com/). This software comes with no warranty. Manual page by L. (Kill-9) Pedersen (kill-9@kill-9.dk), Mercurmedia Data Model Architect / system developer (http://www.mercurmedia.com) 
+.\" end of man page 

man/mysqlaccess.1 → man/mysqlaccess.1.in

-.TH mysqlaccess 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH mysqlaccess 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 .BR mysqlaccess
  \- Create new users to mysql.
@@ -95,24 +95,29 @@ If no host is given, `localhost' is assumed
 Wildcards (*,?,%,_) are allowed for host, user and db, but be sure 
 to escape them from your shell!! (i.e., type \\* or '*')
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill\-9.dk), Mercurmedia Data Model Architect /

man/mysqladmin.1 → man/mysqladmin.1.in

-.TH mysqladmin 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH mysqladmin 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
  mysqladmin [OPTIONS] command command....  \- A utility for performing administrative operations
 .SH OPTION SYNOPSIS
@@ -178,31 +178,32 @@ Prints variables available
 .BR  version
 Get version info from server  
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill-9.dk), Mercurmedia Data Model Architect /
 system developer (http://www.mercurmedia.com)
 .\" end of man page
 
-
-
-
-

man/mysqld.1 → man/mysqld.1.in

-.TH mysqld 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH mysqld 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
-.BR mysqld
- \- Starts the MySQL server demon
+mysqld \- The MySQL server demon
 .SH USAGE
 mysqld [OPTIONS]
 .SH SYNOPSIS
@@ -204,24 +203,29 @@ Output version information and exit.
 
 .SH NOTE
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill\-9.dk), Mercurmedia Data Model Architect /

man/mysqld_multi.1 → man/mysqld_multi.1.in

-.TH mysqld_multi 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH mysqld_multi 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME 
 mysqld_multi  - is meant for managing several mysqld processes running in different UNIX sockets and TCP/IP ports. 
 .SH USAGE 
@@ -58,27 +58,31 @@ Please see the mysql manual for more detailed information on this.
 
 
 .SH "SEE ALSO" 
-
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 
 .SH AUTHOR 
 
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill-9.dk), Mercurmedia Data Model Architect /

man/mysqld_safe.1 → man/mysqld_safe.1.in

-.TH safe_mysqld 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH safe_mysqld 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 mysqld_safe \- start the mysqld daemon on Unix.
 .SH SYNOPSIS
@@ -60,22 +60,27 @@ Set the timezone (the TZ) variable to the value of this parameter.
 .SH NOTE
 Note that all options on the command line to mysqld_safe are passed to mysqld. If you wants to use any options in mysqld_safe that mysqld doesn't support, you must specify these in the option file. 
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
 Michael (Monty) Widenius (monty@mysql.com),
 MySQL AB (http://www.mysql.com).
 This software comes with no warranty.

man/mysqldump.1 → man/mysqldump.1.in

-.TH mysqldump 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH mysqldump 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 mysqldump \- text-based client for dumping or backing up mysql databases , tables and or data.
 
@@ -247,24 +247,29 @@ If all the databases are wanted, one can use:
 mysqldump \fP\fI\-\-all\-databases\fP > all_databases.sql
 
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill-9.dk), Mercurmedia Data Model Architect /

man/mysqlshow.1 → man/mysqlshow.1.in

-.TH mysqlshow 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH mysqlshow 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 .BR mysqlshow
  \- Shows the structure of a mysql database (databases,tables and columns)
@@ -67,24 +67,29 @@ If no column is given then all matching columns and columntypes in table
 are shown
 
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysql_zap(1),
+perror(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill\-9.dk), Mercurmedia Data Model Architect /

man/perror.1 → man/perror.1.in

-.TH perror 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH perror 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME
 perror \- describes a system or MySQL error code.
 .SH SYNOPSIS
@@ -27,24 +27,29 @@ shell> perror 64 79
 Error code  64:  Machine is not on the network
 Error code  79:  Can not access a needed shared library
 .SH "SEE ALSO"
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+replace(1)
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill\-9.dk), Mercurmedia Data Model Architect /

man/replace.1 → man/replace.1.in

-.TH replace 1 "19 December 2000" "MySQL 4.0" "MySQL database"
+.TH replace 1 "19 December 2000" "MySQL @MYSQL_BASE_VERSION@" "MySQL database"
 .SH NAME 
 .TP
 replace - A utility program that is used by msql2mysql, but that has more general applicability as well. replace changes strings in place in files or on the standard input. Uses a finite state machine to match longer strings first. Can be used to swap strings.
@@ -41,24 +41,29 @@ this command swaps a and b in the given files:
 .TP
 shell> replace a b b a -- file1 file2 ...
 .SH "SEE ALSO" 
-isamchk (1),
-isamlog (1),
-mysqlaccess (1),
-mysqladmin (1),
-mysqlbug (1),
-mysqld (1),
-mysqldump (1),
-mysqlshow (1),
-msql2mysql (1),
-perror (1),
-replace (1),
-mysqld_safe (1),
-which1 (1),
-zap (1),
+isamchk(1),
+isamlog(1),
+mysql(1),
+mysqlaccess(1),
+mysqladmin(1),
+mysqld(1),
+mysqld_multi(1),
+mysqld_safe(1),
+mysqldump(1),
+mysql_fix_privilege_tables(1),
+mysqlshow(1),
+mysql_zap(1),
+perror(1),
+.P
+For more information please refer to the MySQL reference
+manual, which may already be installed locally and which
+is also available online at http://www.mysql.com/doc/en/
+.SH BUGS
+Please refer to http://bugs.mysql.com/ to report bugs.
 .SH AUTHOR 
-Ver 1.0, distribution 3.23.29a
-Michael (Monty) Widenius (monty@tcx.se),
-TCX Datakonsult AB (http://www.tcx.se).
+Ver 1.0, distribution @MYSQL_NO_DASH_VERSION@
+Michael (Monty) Widenius (monty@mysql.com),
+MySQL AB (http://www.mysql.com/).
 This software comes with no warranty.
 Manual page by L. (Kill-9) Pedersen 
 (kill-9@kill-9.dk), Mercurmedia Data Model Architect /

myisam/mi_check.c

@@ -922,7 +922,7 @@ int chk_data_link(MI_CHECK *param, MI_INFO *info,int extend)
 	  info->checksum=mi_checksum(info,record);
 	  if (param->testflag & (T_EXTEND | T_MEDIUM | T_VERBOSE))
 	  {
-	    if (_mi_rec_check(info,record, info->rec_buff))
+	    if (_mi_rec_check(info,record, info->rec_buff,block_info.rec_len))
 	    {
 	      mi_check_print_error(param,"Found wrong packed record at %s",
 			  llstr(start_recpos,llbuff));
@@ -2350,6 +2350,11 @@ int mi_repair_parallel(MI_CHECK *param, register MI_INFO *info,
 
     sort_param[i].record= (((char *)(sort_param+share->base.keys))+
 			   (share->base.pack_reclength * i));
+    if (!mi_alloc_rec_buff(info, -1, &sort_param[i].rec_buff))
+    {
+      mi_check_print_error(param,"Not enough memory!");
+      goto err;
+    }
 
     sort_param[i].key_length=share->rec_reflength;
     for (keyseg=sort_param[i].keyinfo->seg; keyseg->type != HA_KEYTYPE_END;
@@ -2911,7 +2916,8 @@ static int sort_get_next_record(MI_SORT_PARAM *sort_param)
 	  info->checksum=mi_checksum(info,sort_param->record);
 	if ((param->testflag & (T_EXTEND | T_REP)) || searching)
 	{
-	  if (_mi_rec_check(info, sort_param->record, sort_param->rec_buff))
+	  if (_mi_rec_check(info, sort_param->record, sort_param->rec_buff,
+                            sort_param->find_length))
 	  {
 	    mi_check_print_info(param,"Found wrong packed record at %s",
 				llstr(sort_param->start_recpos,llbuff));

myisam/mi_dynrec.c

@@ -14,7 +14,15 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
 
-	/* Functions to handle space-packed-records and blobs */
+/*
+  Functions to handle space-packed-records and blobs
+ 
+  A row may be stored in one or more linked blocks.
+  The block size is between MI_MIN_BLOCK_LENGTH and MI_MAX_BLOCK_LENGTH.
+  Each block is aligned on MI_DYN_ALIGN_SIZE.
+  The reson for the max block size is to not have too many different types
+  of blocks.  For the differnet block types, look at _mi_get_block_info()
+*/
 
 #include "myisamdef.h"
 #include <assert.h>
@@ -148,7 +156,7 @@ static int write_dynamic_record(MI_INFO *info, const byte *record,
   } while (reclength);
 
   DBUG_RETURN(0);
- err:
+err:
   DBUG_RETURN(1);
 }
 
@@ -264,37 +272,62 @@ static bool unlink_deleted_block(MI_INFO *info, MI_BLOCK_INFO *block_info)
   DBUG_RETURN(0);
 }
 
-	/* Delete datarecord from database */
-	/* info->rec_cache.seek_not_done is updated in cmp_record */
 
-static int delete_dynamic_record(MI_INFO *info, my_off_t filepos,
-				 uint second_read)
+/*
+  Add a backward link to delete block
+
+  SYNOPSIS
+    update_backward_delete_link()
+    info		MyISAM handler
+    delete_block	Position to delete block to update.
+			If this is 'HA_OFFSET_ERROR', nothing will be done
+    filepos		Position to block that 'delete_block' should point to
+
+  RETURN
+    0  ok
+    1  error.  In this case my_error is set.
+*/
+
+static int update_backward_delete_link(MI_INFO *info, my_off_t delete_block,
+				       my_off_t filepos)
 {
-  uint length,b_type;
-  MI_BLOCK_INFO block_info,del_block;
-  int error=0;
-  my_bool remove_next_block;
-  DBUG_ENTER("delete_dynamic_record");
+  MI_BLOCK_INFO block_info;
+  DBUG_ENTER("update_backward_delete_link");
 
-  /* First add a link from the last block to the new one */
-  if (info->s->state.dellink != HA_OFFSET_ERROR)
+  if (delete_block != HA_OFFSET_ERROR)
   {
     block_info.second_read=0;
-    if (_mi_get_block_info(&block_info,info->dfile,info->s->state.dellink)
+    if (_mi_get_block_info(&block_info,info->dfile,delete_block)
 	& BLOCK_DELETED)
     {
       char buff[8];
       mi_sizestore(buff,filepos);
-      if (my_pwrite(info->dfile,buff,8,info->s->state.dellink+12,
-		    MYF(MY_NABP)))
-	error=1;				/* Error on write */
+      if (my_pwrite(info->dfile,buff, 8, delete_block+12, MYF(MY_NABP)))
+	DBUG_RETURN(1);				/* Error on write */
     }
     else
     {
-      error=1;					/* Wrong delete link */
       my_errno=HA_ERR_WRONG_IN_RECORD;
+      DBUG_RETURN(1);				/* Wrong delete link */
     }
   }
+  return 0;
+}
+
+	/* Delete datarecord from database */
+	/* info->rec_cache.seek_not_done is updated in cmp_record */
+
+static int delete_dynamic_record(MI_INFO *info, my_off_t filepos,
+				 uint second_read)
+{
+  uint length,b_type;
+  MI_BLOCK_INFO block_info,del_block;
+  int error;
+  my_bool remove_next_block;
+  DBUG_ENTER("delete_dynamic_record");
+
+  /* First add a link from the last block to the new one */
+  error= update_backward_delete_link(info, info->s->state.dellink, filepos);
 
   block_info.second_read=second_read;
   do
@@ -518,21 +551,11 @@ int _mi_write_part_record(MI_INFO *info,
   *reclength-=(length-head_length);
   *flag=6;
 
-  if (del_length && next_delete_block != HA_OFFSET_ERROR)
+  if (del_length)
   {
     /* link the next delete block to this */
-    MI_BLOCK_INFO del_block;
-    del_block.second_read=0;
-    if (!(_mi_get_block_info(&del_block,info->dfile,next_delete_block)
-	  & BLOCK_DELETED))
-    {
-      my_errno=HA_ERR_WRONG_IN_RECORD;
-      goto err;
-    }
-    mi_sizestore(del_block.header+12,info->s->state.dellink);
-    if (my_pwrite(info->dfile,(char*) del_block.header+12,8,
-		  next_delete_block+12,
-		  MYF(MY_NABP)))
+    if (update_backward_delete_link(info, next_delete_block,
+				    info->s->state.dellink))
       goto err;
   }
 
@@ -574,6 +597,8 @@ static int update_dynamic_record(MI_INFO *info, my_off_t filepos, byte *record,
       {
 	uint tmp=MY_ALIGN(reclength - length + 3 +
 			  test(reclength >= 65520L),MI_DYN_ALIGN_SIZE);
+	/* Don't create a block bigger than MI_MAX_BLOCK_LENGTH */
+	tmp= min(length+tmp, MI_MAX_BLOCK_LENGTH)-length;
 	/* Check if we can extend this block */
 	if (block_info.filepos + block_info.block_len ==
 	    info->state->data_file_length &&
@@ -588,9 +613,15 @@ static int update_dynamic_record(MI_INFO *info, my_off_t filepos, byte *record,
 	  info->update|= HA_STATE_WRITE_AT_END | HA_STATE_EXTEND_BLOCK;
 	  length+=tmp;
 	}
-	else
+	else if (length < MI_MAX_BLOCK_LENGTH - MI_MIN_BLOCK_LENGTH)
 	{
-	  /* Check if next block is a deleted block */
+	  /*
+	    Check if next block is a deleted block
+	    Above we have MI_MIN_BLOCK_LENGTH to avoid the problem where
+	    the next block is so small it can't be splited which could
+	    casue problems
+	  */
+
 	  MI_BLOCK_INFO del_block;
 	  del_block.second_read=0;
 	  if (_mi_get_block_info(&del_block,info->dfile,
@@ -601,7 +632,35 @@ static int update_dynamic_record(MI_INFO *info, my_off_t filepos, byte *record,
 	    DBUG_PRINT("info",("Extending current block"));
 	    if (unlink_deleted_block(info,&del_block))
 	      goto err;
-	    length+=del_block.block_len;
+	    if ((length+=del_block.block_len) > MI_MAX_BLOCK_LENGTH)
+	    {
+	      /*
+		New block was too big, link overflow part back to
+		delete list
+	      */
+	      my_off_t next_pos;
+	      ulong rest_length= length-MI_MAX_BLOCK_LENGTH;
+	      set_if_bigger(rest_length, MI_MIN_BLOCK_LENGTH);
+	      next_pos= del_block.filepos+ del_block.block_len - rest_length;
+
+	      if (update_backward_delete_link(info, info->s->state.dellink,
+					      next_pos))
+		DBUG_RETURN(1);
+
+	      /* create delete link for data that didn't fit into the page */
+	      del_block.header[0]=0;
+	      mi_int3store(del_block.header+1, rest_length);
+	      mi_sizestore(del_block.header+4,info->s->state.dellink);
+	      bfill(del_block.header+12,8,255);
+	      if (my_pwrite(info->dfile,(byte*) del_block.header,20, next_pos,
+			    MYF(MY_NABP)))
+		DBUG_RETURN(1);
+	      info->s->state.dellink= next_pos;
+	      info->s->state.split++;
+	      info->state->del++;
+	      info->state->empty+= rest_length;
+	      length-= rest_length;
+	    }
 	  }
 	}
       }
@@ -615,7 +674,10 @@ static int update_dynamic_record(MI_INFO *info, my_off_t filepos, byte *record,
 			      &record,&reclength,&flag))
       goto err;
     if ((filepos=block_info.next_filepos) == HA_OFFSET_ERROR)
+    {
+      /* Start writing data on deleted blocks */
       filepos=info->s->state.dellink;
+    }
   }
 
   if (block_info.next_filepos != HA_OFFSET_ERROR)
@@ -744,7 +806,8 @@ uint _mi_rec_pack(MI_INFO *info, register byte *to, register const byte *from)
   Returns 0 if record is ok.
 */
 
-my_bool _mi_rec_check(MI_INFO *info,const char *record, byte *rec_buff)
+my_bool _mi_rec_check(MI_INFO *info,const char *record, byte *rec_buff,
+                      ulong packed_length)
 {
   uint		length,new_length,flag,bit,i;
   char		*pos,*end,*packpos,*to;
@@ -836,8 +899,7 @@ my_bool _mi_rec_check(MI_INFO *info,const char *record, byte *rec_buff)
       to+=length;
     }
   }
-  if (info->packed_length != (uint) (to - rec_buff)
-      + test(info->s->calc_checksum) ||
+  if (packed_length != (uint) (to - rec_buff) + test(info->s->calc_checksum) ||
       (bit != 1 && (flag & ~(bit - 1))))
     goto err;
   if (info->s->calc_checksum)
@@ -850,7 +912,7 @@ my_bool _mi_rec_check(MI_INFO *info,const char *record, byte *rec_buff)
   }
   DBUG_RETURN(0);
 
- err:
+err:
   DBUG_RETURN(1);
 }
 
@@ -966,8 +1028,8 @@ ulong _mi_rec_unpack(register MI_INFO *info, register byte *to, byte *from,
   if (info->s->calc_checksum)
     from++;
   if (to == to_end && from == from_end && (bit == 1 || !(flag & ~(bit-1))))
-    DBUG_RETURN((info->packed_length=found_length));
- err:
+    DBUG_RETURN(found_length);
+err:
   my_errno=HA_ERR_RECORD_DELETED;
   DBUG_PRINT("error",("to_end: %lx -> %lx  from_end: %lx -> %lx",
 		      to,to_end,from,from_end));
@@ -1210,7 +1272,7 @@ int _mi_cmp_dynamic_record(register MI_INFO *info, register const byte *record)
     }
   }
   my_errno=0;
- err:
+err:
   if (buffer != info->rec_buff)
     my_afree((gptr) buffer);
   DBUG_RETURN(my_errno);

myisam/mi_search.c

@@ -847,7 +847,7 @@ int _mi_key_cmp(register MI_KEYSEG *keyseg, register uchar *a,
         full_b_length=b_length;
         next_key_length=key_length-b_length-pack_length;
 
-	if (!(nextflag & (SEARCH_PREFIX | SEARCH_UPDATE)))
+	if ((nextflag & (SEARCH_FIND | SEARCH_UPDATE)) == SEARCH_FIND)
 	{
 	  while (a_length && a[a_length-1] == ' ')
 	    a_length--;

myisam/myisamdef.h

@@ -244,6 +244,8 @@ struct st_myisam_info {
   my_off_t last_search_keypage;		/* Last keypage when searching */
   my_off_t dupp_key_pos;
   ha_checksum checksum;
+  /* QQ: the folloing two xxx_length fields should be removed,
+     as they are not compatible with parallel repair */
   ulong packed_length,blob_length;	/* Length of found, packed record */
   int  dfile;				/* The datafile */
   uint opt_flag;			/* Optim. for space/speed */
@@ -536,7 +538,8 @@ extern byte *mi_alloc_rec_buff(MI_INFO *,ulong, byte**);
 
 extern ulong _mi_rec_unpack(MI_INFO *info,byte *to,byte *from,
 			    ulong reclength);
-extern my_bool _mi_rec_check(MI_INFO *info,const char *record, byte *packpos);
+extern my_bool _mi_rec_check(MI_INFO *info,const char *record, byte *packpos,
+                             ulong reclength);
 extern int _mi_write_part_record(MI_INFO *info,my_off_t filepos,ulong length,
 				 my_off_t next_filepos,byte **record,
 				 ulong *reclength,int *flag);

mysql-test/r/func_str.result

@@ -266,3 +266,10 @@ CONCAT("</a>",RPAD("",(55 - LENGTH(title)),"."))
 NULL
 </a>..........................
 DROP TABLE t1;
+CREATE TABLE t1 (i int, j int);
+INSERT INTO t1 VALUES (1,1),(2,2);
+SELECT DISTINCT i, ELT(j, '345', '34') FROM t1;
+i	ELT(j, '345', '34')
+1	345
+2	34
+DROP TABLE t1;

mysql-test/r/myisam-blob.result

+drop table if exists t1;
+CREATE TABLE t1 (data LONGBLOB) ENGINE=myisam;
+INSERT INTO t1 (data) VALUES (NULL);
+UPDATE t1 set data=repeat('a',18*1024*1024);
+select length(data) from t1;
+length(data)
+18874368
+delete from t1 where left(data,1)='a';
+check table t1;
+Table	Op	Msg_type	Msg_text
+test.t1	check	status	OK
+truncate table t1;
+INSERT INTO t1 (data) VALUES (repeat('a',1*1024*1024));
+INSERT INTO t1 (data) VALUES (repeat('b',16*1024*1024-1024));
+delete from t1 where left(data,1)='b';
+check table t1;
+Table	Op	Msg_type	Msg_text
+test.t1	check	status	OK
+UPDATE t1 set data=repeat('c',17*1024*1024);
+check table t1;
+Table	Op	Msg_type	Msg_text
+test.t1	check	status	OK
+delete from t1 where left(data,1)='c';
+check table t1;
+Table	Op	Msg_type	Msg_text
+test.t1	check	status	OK
+drop table t1;

mysql-test/r/myisam.result

@@ -385,3 +385,21 @@ check table t1;
 Table	Op	Msg_type	Msg_text
 test.t1	check	status	OK
 drop table t1;
+create table t1 ( a text not null, key a (a(20)));
+insert into t1 values ('aaa   '),('aaa');
+repair table t1;
+Table	Op	Msg_type	Msg_text
+test.t1	repair	status	OK
+select concat(a,'.') from t1 where a='aaa';
+concat(a,'.')
+aaa.
+aaa   .
+drop table t1;
+create table t1(a text not null, b text not null, c text not null, index (a(10),b(10),c(10)));
+insert into t1 values('807780', '477', '165');
+insert into t1 values('807780', '477', '162');
+insert into t1 values('807780', '472', '162');
+select * from t1 where a='807780' and b='477' and c='165';
+a	b	c
+807780	477	165
+drop table t1;

mysql-test/r/range.result

@@ -300,11 +300,3 @@ SELECT COUNT(*) FROM t1 WHERE (c=0 and b=1) or (c=0 and a=1);
 COUNT(*)
 6
 DROP TABLE t1;
-create table t1(a text not null, b text not null, c text not null, index (a(10),b(10),c(10)));
-insert into t1 values('807780', '477', '165');
-insert into t1 values('807780', '477', '162');
-insert into t1 values('807780', '472', '162');
-select * from t1 where a='807780' and b='477' and c='165';
-a	b	c
-807780	477	165
-drop table t1;

mysql-test/t/func_str.test

@@ -154,3 +154,12 @@ INSERT INTO t1 VALUES ('House passes the CAREERS bill');
 SELECT CONCAT("</a>",RPAD("",(55 - LENGTH(title)),".")) from t1;
 
 DROP TABLE t1;
+
+#
+# test for Bug #2290 "output truncated with ELT when using DISTINCT"
+#
+
+CREATE TABLE t1 (i int, j int);
+INSERT INTO t1 VALUES (1,1),(2,2);
+SELECT DISTINCT i, ELT(j, '345', '34') FROM t1;
+DROP TABLE t1;

mysql-test/t/myisam-blob-master.opt

+--max-allowed-packet=24M --skip-innodb --key-buffer-size=1M

mysql-test/t/myisam-blob.test

+#
+# Test bugs in the MyISAM code with blobs
+#
+
+--disable_warnings
+drop table if exists t1;
+--enable_warnings
+
+# Bug #2159 (Problem with update of blob to > 16M)
+
+CREATE TABLE t1 (data LONGBLOB) ENGINE=myisam;
+INSERT INTO t1 (data) VALUES (NULL);
+UPDATE t1 set data=repeat('a',18*1024*1024);
+select length(data) from t1;
+delete from t1 where left(data,1)='a';
+check table t1;
+truncate table t1;
+INSERT INTO t1 (data) VALUES (repeat('a',1*1024*1024));
+INSERT INTO t1 (data) VALUES (repeat('b',16*1024*1024-1024));
+delete from t1 where left(data,1)='b';
+check table t1;
+
+# now we have two blocks in the table, first is a 1M record and second is
+# a 16M delete block.
+
+UPDATE t1 set data=repeat('c',17*1024*1024);
+check table t1;
+delete from t1 where left(data,1)='c';
+check table t1;
+drop table t1;

mysql-test/t/myisam.test

@@ -385,3 +385,24 @@ insert into t1 (b) values (repeat('z',100));
 update t1 set b="test" where left(b,1) > 'n';
 check table t1;
 drop table t1;
+
+#
+# two bugs in myisam-space-stripping feature
+#
+create table t1 ( a text not null, key a (a(20)));
+insert into t1 values ('aaa   '),('aaa');
+repair table t1;
+select concat(a,'.') from t1 where a='aaa';
+drop table t1;
+
+#
+# Third bug in the same code (BUG#2295)
+#
+
+create table t1(a text not null, b text not null, c text not null, index (a(10),b(10),c(10)));
+insert into t1 values('807780', '477', '165');
+insert into t1 values('807780', '477', '162');
+insert into t1 values('807780', '472', '162');
+select * from t1 where a='807780' and b='477' and c='165';
+drop table t1;
+

mysql-test/t/range.test

@@ -249,14 +249,3 @@ SELECT COUNT(*) FROM t1 WHERE (c=0 and a=1) or (c=0 and b=1);
 SELECT COUNT(*) FROM t1 WHERE (c=0 and b=1) or (c=0 and a=1);
 DROP TABLE t1;
 
-#
-# BUG#2295 - range on blob
-#
-
-create table t1(a text not null, b text not null, c text not null, index (a(10),b(10),c(10)));
-insert into t1 values('807780', '477', '165');
-insert into t1 values('807780', '477', '162');
-insert into t1 values('807780', '472', '162');
-select * from t1 where a='807780' and b='477' and c='165';
-drop table t1;
-

mysys/my_thr_init.c

@@ -105,7 +105,7 @@ void my_thread_global_end(void)
 #ifdef PTHREAD_ADAPTIVE_MUTEX_INITIALIZER_NP
   pthread_mutexattr_destroy(&my_fast_mutexattr);
 #endif
-#ifdef PPTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP
+#ifdef PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP
   pthread_mutexattr_destroy(&my_errchk_mutexattr);
 #endif
   pthread_mutex_destroy(&THR_LOCK_malloc);

sql/item_strfunc.cc

@@ -1507,7 +1507,14 @@ void Item_func_elt::fix_length_and_dec()
 {
   max_length=0;
   decimals=0;
-  for (uint i=1 ; i < arg_count ; i++)
+  /*
+    first numeric argument isn't in args (3.23 and 4.0)
+    but since 4.1 the cycle should start from 1
+    so this change 
+    
+    should NOT be merged into 4.1!!!
+  */
+  for (uint i= 0; i < arg_count ; i++)
   {
     set_if_bigger(max_length,args[i]->max_length);
     set_if_bigger(decimals,args[i]->decimals);

sql/key.cc

@@ -182,9 +182,9 @@ int key_cmp(TABLE *table,const byte *key,uint idx,uint key_length)
     }
     if (key_part->key_part_flag & (HA_BLOB_PART | HA_VAR_LENGTH))
     {
-      if (key_part->field->key_cmp(key, key_part->length+2))
+      if (key_part->field->key_cmp(key, key_part->length+ HA_KEY_BLOB_LENGTH))
 	return 1;
-      length=key_part->length+2;
+      length=key_part->length+HA_KEY_BLOB_LENGTH;
     }
     else
     {

sql/mysqld.cc

@@ -306,7 +306,6 @@ char* log_error_file_ptr= log_error_file;
 static pthread_t select_thread;
 static my_bool opt_noacl=0, opt_bootstrap=0, opt_myisam_log=0;
 my_bool opt_safe_user_create = 0, opt_no_mix_types = 0;
-my_bool opt_old_rpl_compat;
 my_bool opt_show_slave_auth_info, opt_sql_bin_update = 0;
 my_bool opt_log_slave_updates= 0, opt_console= 0;
 my_bool opt_readonly = 0;
@@ -3198,7 +3197,7 @@ enum options_mysqld {
   OPT_HAVE_NAMED_PIPE,
   OPT_DO_PSTACK, OPT_REPORT_HOST,
   OPT_REPORT_USER, OPT_REPORT_PASSWORD, OPT_REPORT_PORT,
-  OPT_SHOW_SLAVE_AUTH_INFO, OPT_OLD_RPL_COMPAT,
+  OPT_SHOW_SLAVE_AUTH_INFO,
   OPT_SLAVE_LOAD_TMPDIR, OPT_NO_MIX_TYPE,
   OPT_RPL_RECOVERY_RANK,OPT_INIT_RPL_ROLE,
   OPT_RELAY_LOG, OPT_RELAY_LOG_INDEX, OPT_RELAY_LOG_INFO_FILE,
@@ -3544,10 +3543,6 @@ Does nothing yet.",
   {"old-protocol", 'o', "Use the old (3.20) protocol client/server protocol",
    (gptr*) &protocol_version, (gptr*) &protocol_version, 0, GET_UINT, NO_ARG,
    PROTOCOL_VERSION, 0, 0, 0, 0, 0},
-  {"old-rpl-compat", OPT_OLD_RPL_COMPAT,
-   "Use old LOAD DATA format in the binary log (don't save data in file)",
-   (gptr*) &opt_old_rpl_compat, (gptr*) &opt_old_rpl_compat, 0, GET_BOOL,
-   NO_ARG, 0, 0, 0, 0, 0, 0},
 #ifdef ONE_THREAD
   {"one-thread", OPT_ONE_THREAD,
    "Only use one thread (for debugging under Linux)", 0, 0, 0, GET_NO_ARG,

sql/opt_sum.cc

@@ -440,14 +440,16 @@ static bool find_range_key(TABLE_REF *ref, Field* field, COND *cond)
 	    left_length < part->store_length ||
 	    (table->file->index_flags(idx) & HA_WRONG_ASCII_ORDER))
 	  break;
+	uint store_length= part->store_length;
 	// Save found constant
 	if (part->null_bit)
+	{
 	  *key_ptr++= (byte) test(part->field->is_null());
-	part->field->get_key_image((char*) key_ptr,
-				   (part->field->type() == FIELD_TYPE_BLOB) ? 
-				   part->length + HA_KEY_BLOB_LENGTH : part->length);
-	key_ptr+=part->store_length - test(part->null_bit);
-	left_length-=part->store_length;
+	  store_length--;
+	}
+	part->field->get_key_image((char*) key_ptr, store_length);
+	key_ptr+= store_length;
+	left_length-= part->store_length;
       }
       if (part == part_end && part->field == field)
       {

sql/slave.cc

@@ -2840,6 +2840,14 @@ static int process_io_create_file(MASTER_INFO* mi, Create_file_log_event* cev)
       if (unlikely(!num_bytes)) /* eof */
       {
        send_ok(net); /* 3.23 master wants it */
+       /*
+         If we wrote Create_file_log_event, then we need to write
+         Execute_load_log_event. If we did not write Create_file_log_event,
+         then this is an empty file and we can just do as if the LOAD DATA
+         INFILE had not existed, i.e. write nothing.
+       */
+       if (unlikely(cev_not_written))
+         break;
        Execute_load_log_event xev(thd,0,0);
        xev.log_pos = mi->master_log_pos;
        if (unlikely(mi->rli.relay_log.append(&xev)))

sql/sql_load.cc

@@ -220,7 +220,7 @@ int mysql_load(THD *thd,sql_exchange *ex,TABLE_LIST *table_list,
     DBUG_RETURN(-1);				// Can't allocate buffers
   }
 
-  if (!opt_old_rpl_compat && mysql_bin_log.is_open())
+  if (mysql_bin_log.is_open())
   {
     lf_info.thd = thd;
     lf_info.ex = ex;
@@ -287,7 +287,7 @@ int mysql_load(THD *thd,sql_exchange *ex,TABLE_LIST *table_list,
   {
     if (transactional_table)
       ha_autocommit_or_rollback(thd,error);
-    if (!opt_old_rpl_compat && mysql_bin_log.is_open())
+    if (mysql_bin_log.is_open())
     {
       /*
         Make sure last block (the one which caused the error) gets logged.
@@ -332,28 +332,16 @@ int mysql_load(THD *thd,sql_exchange *ex,TABLE_LIST *table_list,
     thd->options|=OPTION_STATUS_NO_TRANS_UPDATE;
   if (mysql_bin_log.is_open())
   {
-    if (opt_old_rpl_compat)
-    {
-      if (!read_file_from_client)
-      {
-	Load_log_event qinfo(thd, ex, db, table->table_name, fields, 
-			     handle_duplicates, log_delayed);
-	mysql_bin_log.write(&qinfo);
-      }
-    }
-    else
+    /*
+      As already explained above, we need to call end_io_cache() or the last
+      block will be logged only after Execute_load_log_event (which is wrong),
+      when read_info is destroyed.
+    */
+    read_info.end_io_cache(); 
+    if (lf_info.wrote_create_file)
     {
-      /*
-        As already explained above, we need to call end_io_cache() or the last
-        block will be logged only after Execute_load_log_event (which is wrong),
-        when read_info is destroyed.
-      */
-      read_info.end_io_cache(); 
-      if (lf_info.wrote_create_file)
-      {
-        Execute_load_log_event e(thd, db, log_delayed);
-        mysql_bin_log.write(&e);
-      }
+      Execute_load_log_event e(thd, db, log_delayed);
+      mysql_bin_log.write(&e);
     }
   }
   if (transactional_table)
@@ -644,7 +632,7 @@ READ_INFO::READ_INFO(File file_par, uint tot_length, String &field_term,
 	cache.read_function = _my_b_net_read;
 
       need_end_io_cache = 1;
-      if (!opt_old_rpl_compat && mysql_bin_log.is_open())
+      if (mysql_bin_log.is_open())
 	cache.pre_read = cache.pre_close =
 	  (IO_CACHE_CALLBACK) log_loaded_block;
     }

sql/sql_repl.h

@@ -11,7 +11,7 @@ typedef struct st_slave_info
   THD* thd;
 } SLAVE_INFO;
 
-extern my_bool opt_show_slave_auth_info, opt_old_rpl_compat;
+extern my_bool opt_show_slave_auth_info;
 extern char *master_host, *master_info_file;
 extern bool server_id_supplied;
 extern I_List<i_string> binlog_do_db, binlog_ignore_db;

sql/sql_select.cc

@@ -1475,8 +1475,8 @@ add_key_field(KEY_FIELD **key_fields,uint and_level,
     bool optimizable=0;
     for (uint i=0; i<num_values; i++)
     {
-      used_tables|=(*value)->used_tables();
-      if (!((*value)->used_tables() & (field->table->map | RAND_TABLE_BIT)))
+      used_tables|=(value[i])->used_tables();
+      if (!((value[i])->used_tables() & (field->table->map | RAND_TABLE_BIT)))
         optimizable=1;
     }
     if (!optimizable)