ndb autotest

 add --tag
 remove prepended mysql-
  add conf-test.cnf
  add embryo upgrade-boot.sh

storage/ndb/test/run-test/Makefile.am

@@ -23,7 +23,7 @@ include $(top_srcdir)/storage/ndb/config/type_ndbapitools.mk.am
 test_PROGRAMS = atrt
 test_DATA=daily-basic-tests.txt daily-devel-tests.txt 16node-tests.txt \
           conf-ndbmaster.cnf \
-          conf-dl145a.cnf test-tests.txt
+          conf-dl145a.cnf test-tests.txt conf-test.cnf
 
 test_SCRIPTS=atrt-analyze-result.sh atrt-gather-result.sh atrt-setup.sh \
           atrt-clear-result.sh autotest-run.sh

storage/ndb/test/run-test/autotest-boot.sh

@@ -24,7 +24,10 @@ verbose=0
 do_clone=yes
 build=yes
 
+tag=
 conf=
+extra_args=
+extra_clone=
 LOCK=$HOME/.autotest-lock
 
 ############################
@@ -40,6 +43,8 @@ do
                 --clone=*) clone=`echo $1 | sed s/--clone=//`;;
                 --version) echo $VERSION; exit;;
                 --conf=*) conf=`echo $1 | sed s/--conf=//`;;
+	        --tag=*) tag=`echo $1 | sed s/--tag=//`;;
+	        --*) echo "Unknown arg: $1";;
                 *) RUN=$*;;
         esac
         shift
@@ -52,14 +57,20 @@ done
 #################################
 if [ -z "$conf" ]
 then
-    conf=`pwd`/autotest.conf
+	if [ -f "`pwd`/autotest.conf" ]
+	then
+		conf="`pwd`/autotest.conf"
+	elif [ -f "$HOME/autotest.conf" ]
+	then
+		conf="$HOME/autotest.conf"
+	fi
 fi
 
 if [ -f $conf ]
 then
 	. $conf
 else
-	echo "Can't find config file: $conf"
+	echo "Can't find config file: >$conf<"
 	exit
 fi
 
@@ -92,7 +103,7 @@ fi
 # Setup the clone source location  #
 ####################################
 
-src_clone=$src_clone_base-$clone
+src_clone=${src_clone_base}${clone}
 
 #######################################
 # Check to see if the lock file exists#
@@ -125,7 +136,14 @@ fi
 # You can add more to this path#
 ################################
 
-dst_place=${build_dir}/clone-mysql-$clone-$DATE.$$
+if [ -z "$tag" ]
+then
+    dst_place=${build_dir}/clone-$clone-$DATE.$$
+else
+    dst_place=${build_dir}/clone-$tag-$DATE.$$
+    extra_args="$extra_args --clone=$tag"
+    extra_clone="-r$tag"
+fi
 
 #########################################
 # Delete source and pull down the latest#
@@ -134,7 +152,12 @@ dst_place=${build_dir}/clone-mysql-$clone-$DATE.$$
 if [ "$do_clone" ]
 then
 	rm -rf $dst_place
-	bk clone  $src_clone $dst_place
+	if [ `echo $src_clone | grep -c 'file:\/\/'` = 1 ]
+	then
+		bk clone -l $extra_clone $src_clone $dst_place
+	else
+		bk clone $extra_clone $src_clone $dst_place
+	fi
 fi
 
 ##########################################
@@ -156,7 +179,7 @@ fi
 ################################
 
 script=$install_dir/mysql-test/ndb/autotest-run.sh
-$script $save_args --conf=$conf --install-dir=$install_dir --suite=$RUN --nolock
+sh -x $script $save_args --conf=$conf --install-dir=$install_dir --suite=$RUN --nolock $extra_args
 
 if [ "$build" ]
 then

storage/ndb/test/run-test/autotest-run.sh

@@ -246,7 +246,7 @@ cd $res_dir
 
 echo "date=$DATE" > info.txt
 echo "suite=$RUN" >> info.txt
-echo "clone=mysql-$clone" >> info.txt
+echo "clone=$clone" >> info.txt
 echo "arch=$target" >> info.txt
 find . | xargs chmod ugo+r
 

storage/ndb/test/run-test/conf-test.cnf

+[atrt]
+basedir = CHOOSE_dir
+baseport = 14000
+clusters = .2node
+
+[ndb_mgmd]
+
+[mysqld]
+skip-innodb
+skip-bdb
+
+[cluster_config.2node]
+ndb_mgmd = CHOOSE_host1
+ndbd = CHOOSE_host2,CHOOSE_host3
+ndbapi= CHOOSE_host1,CHOOSE_host1,CHOOSE_host1
+
+NoOfReplicas = 2
+IndexMemory = 25M 
+DataMemory = 100M
+BackupMemory = 64M
+MaxNoOfConcurrentScans = 100
+MaxNoOfSavedMessages= 1000
+SendBufferMemory = 2M
+NoOfFragmentLogFiles = 4
+FragmentLogFileSize = 64M
+

storage/ndb/test/run-test/upgrade-boot.sh

+#!/bin/sh
+#############################################################
+# This script created by Jonas does the following	    #
+# Cleans up clones and pevious builds, pulls new clones,    #
+# builds, deploys, configures the tests and launches ATRT   #
+#############################################################
+
+###############
+#Script setup #
+##############
+
+save_args=$*
+VERSION="upgrade-boot.sh version 1.00"
+
+DATE=`date '+%Y-%m-%d'`
+HOST=`hostname -s`
+export DATE HOST
+
+set -e
+
+echo "`date` starting: $*"
+
+verbose=0
+do_clone=yes
+build=yes
+
+tag0=
+tag1=
+conf=
+extra_args=
+extra_clone=
+LOCK=$HOME/.autotest-lock
+
+############################
+# Read command line entries#
+############################
+
+while [ "$1" ]
+do
+        case "$1" in
+                --no-clone) do_clone="";;
+                --no-build) build="";;
+                --verbose) verbose=`expr $verbose + 1`;;
+                --clone=*) clone0=`echo $1 | sed s/--clone=//`;;
+                --clone0=*) clone0=`echo $1 | sed s/--clone0=//`;;
+                --clone1=*) clone1=`echo $1 | sed s/--clone1=//`;;
+                --version) echo $VERSION; exit;;
+                --conf=*) conf=`echo $1 | sed s/--conf=//`;;
+	        --tag=*) tag0=`echo $1 | sed s/--tag=//`;;
+	        --tag0=*) tag0=`echo $1 | sed s/--tag0=//`;;
+	        --tag1=*) tag1=`echo $1 | sed s/--tag1=//`;;
+	        --*) echo "Unknown arg: $1";;
+                *) RUN=$*;;
+        esac
+        shift
+done
+
+if [ -z "$clone1" ]
+then
+	clone1=$clone0
+fi
+
+if [ -z "$tag0" ]
+then
+	echo "No tag0 specified"
+	exit
+fi
+
+if [ -z "$tag1" ]
+then
+        echo "No tag1 specified"
+        exit
+fi
+
+#################################
+#Make sure the configfile exists#
+#if it does not exit. if it does#
+# (.) load it			# 
+#################################
+if [ -z "$conf" ]
+then
+	if [ -f "`pwd`/autotest.conf" ]
+	then
+		conf="`pwd`/autotest.conf"
+	elif [ -f "$HOME/autotest.conf" ]
+	then
+		conf="$HOME/autotest.conf"
+	fi
+fi
+
+if [ -f $conf ]
+then
+	. $conf
+else
+	echo "Can't find config file: >$conf<"
+	exit
+fi
+
+###############################
+# Validate that all interesting
+#   variables where set in conf
+###############################
+vars="src_clone_base install_dir build_dir"
+for i in $vars
+do
+  t=`echo echo \\$$i`
+  if [ -z "`eval $t`" ]
+  then
+      echo "Invalid config: $conf, variable $i is not set"
+      exit
+  fi
+done
+
+###############################
+#Print out the enviroment vars#
+###############################
+
+if [ $verbose -gt 0 ]
+then
+	env
+fi
+
+####################################
+# Setup the lock file name and path#
+# Setup the clone source location  #
+####################################
+
+src_clone0=${src_clone_base}${clone0}
+src_clone1=${src_clone_base}${clone1}
+
+#######################################
+# Check to see if the lock file exists#
+# If it does exit. 		      #
+#######################################
+
+if [ -f $LOCK ]
+then
+	echo "Lock file exists: $LOCK"
+	exit 1
+fi
+
+#######################################
+# If the lock file does not exist then#
+# create it with date and run info    #
+#######################################
+
+echo "$DATE $RUN" > $LOCK
+
+#############################
+#If any errors here down, we#
+# trap them, and remove the #
+# Lock file before exit     #
+#############################
+if [ `uname -s` != "SunOS" ]
+then
+	trap "rm -f $LOCK" ERR
+fi
+
+# You can add more to this path#
+################################
+
+dst_place0=${build_dir}/clone-$tag0-$DATE.$$
+dst_place1=${build_dir}/clone-$tag1-$DATE.$$
+
+#########################################
+# Delete source and pull down the latest#
+#########################################
+
+if [ "$do_clone" ]
+then
+	rm -rf $dst_place0 $dst_place1
+	if [ `echo $src_clone0 | grep -c 'file:\/\/'` = 1 ]
+	then
+		bk clone -l -r$tag0 $src_clone0 $dst_place0
+	else
+		bk clone -r$tag0 $src_clone0 $dst_place0
+	fi
+
+        if [ `echo $src_clone1 | grep -c 'file:\/\/'` = 1 ]
+        then
+                bk clone -l -r$tag1 $src_clone1 $dst_place1
+        else
+                bk clone -r$tag1 $src_clone1 $dst_place1
+        fi
+fi
+
+##########################################
+# Build the source, make installs, and   #
+# create the database to be rsynced	 #
+##########################################
+install_dir0=$install_dir/$tag0
+install_dir1=$install_dir/$tag1
+if [ "$build" ]
+then
+	cd $dst_place0
+        rm -rf $install_dir0
+	BUILD/compile-ndb-autotest --prefix=$install_dir0
+	make install
+
+	cd $dst_place1
+	rm -rf $install_dir1
+        BUILD/compile-ndb-autotest --prefix=$install_dir1
+	make install
+fi
+
+
+################################
+# Start run script             #
+################################
+
+script=$install_dir1/mysql-test/ndb/upgrade-run.sh
+$script $save_args --conf=$conf --install-dir=$install_dir --suite=$RUN --nolock $extra_args
+
+if [ "$build" ]
+then
+    rm -rf $dst_place0 $dst_place1
+fi
+rm -f $LOCK