Merge 5.1-bugteam -> local bugfix branch

configure.in

@@ -455,46 +455,50 @@ fi
 
 AC_SUBST(ABI_CHECK)
 
-# Lock for PS
+# Look for PS usage.  We use double dollar-signs in FIND_PROC because this
+# value is written to a makefile, which interprets away one level of
+# dollar-signs.  So, interpretation stages are  m4 and then shell in autoconf,
+# then Make, then shell.  The autoconf substitution uses single quotes, so 
+# no unprotected single quotes should appear in the expression.
 AC_PATH_PROG(PS, ps, ps)
 AC_MSG_CHECKING("how to check if pid exists")
 PS=$ac_cv_path_PS
 # Linux style
-if $PS p $$ 2> /dev/null | grep `echo $0 | sed s/\-//` > /dev/null
+if $PS wwwp $$ 2> /dev/null | grep -- "$0" > /dev/null
 then
-  FIND_PROC="$PS p \$\$PID | grep -v grep | grep \$\$MYSQLD > /dev/null"
+  FIND_PROC="$PS wwwp \$\$PID | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" > /dev/null"
 # Solaris
-elif $PS -fp $$ 2> /dev/null | grep $0 > /dev/null
+elif $PS -fp $$ 2> /dev/null | grep -- $0 > /dev/null
 then
-  FIND_PROC="$PS -p \$\$PID | grep -v grep | grep \$\$MYSQLD > /dev/null"
+  FIND_PROC="$PS -p \$\$PID | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" > /dev/null"
 # BSD style
-elif $PS -uaxww 2> /dev/null | grep $0 > /dev/null
+elif $PS -uaxww 2> /dev/null | grep -- $0 > /dev/null
 then
-  FIND_PROC="$PS -uaxww | grep -v grep | grep \$\$MYSQLD | grep \" \$\$PID \" > /dev/null"
+  FIND_PROC="$PS -uaxww | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" | grep \" \$\$PID \" > /dev/null"
 # SysV style
-elif $PS -ef 2> /dev/null | grep $0 > /dev/null
+elif $PS -ef 2> /dev/null | grep -- $0 > /dev/null
 then
-  FIND_PROC="$PS -ef | grep -v grep | grep \$\$MYSQLD | grep \" \$\$PID \" > /dev/null"
+  FIND_PROC="$PS -ef | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" | grep \" \$\$PID \" > /dev/null"
 # Do anybody use this?
-elif $PS $$ 2> /dev/null | grep $0 > /dev/null
+elif $PS $$ 2> /dev/null | grep -- $0 > /dev/null
 then
-  FIND_PROC="$PS \$\$PID | grep -v grep | grep \$\$MYSQLD > /dev/null"
+  FIND_PROC="$PS \$\$PID | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" > /dev/null"
 else
   case $SYSTEM_TYPE in
     *freebsd*|*dragonfly*)
-      FIND_PROC="$PS p \$\$PID | grep -v grep | grep \$\$MYSQLD > /dev/null"
+      FIND_PROC="$PS p \$\$PID | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" > /dev/null"
       ;;
     *darwin*)
-      FIND_PROC="$PS -uaxww | grep -v grep | grep \$\$MYSQLD | grep \" \$\$PID \" > /dev/null"
+      FIND_PROC="$PS -uaxww | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" | grep \" \$\$PID \" > /dev/null"
       ;;
     *cygwin*)
-      FIND_PROC="$PS -e | grep -v grep | grep \$\$MYSQLD | grep \" \$\$PID \" > /dev/null"
+      FIND_PROC="$PS -e | grep -v \" grep\" | grep -v mysqld_safe | grep -- \"\$\$MYSQLD\" | grep \" \$\$PID \" > /dev/null"
       ;;
     *netware*)
       FIND_PROC=
       ;;
     *)
-      AC_MSG_ERROR([Could not find the right ps switches. Which OS is this ?. See the Installation chapter in the Reference Manual.])
+      AC_MSG_ERROR([Could not find the right ps and/or grep switches. Which OS is this?  See the Installation chapter in the Reference Manual.])
   esac
 fi
 AC_SUBST(FIND_PROC)

mysql-test/extra/binlog_tests/binlog.test

@@ -125,6 +125,45 @@ drop table t1;
 --replace_regex /\/\* xid=.* \*\//\/* XID *\// /table_id: [0-9]+/table_id: #/ /Server ver: [^,]*,/Server version,/
 show binlog events from 0;
 
+
+#
+# Bug #39182: Binary log producing incompatible character set query from 
+# stored procedure.
+#
+reset master;
+CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
+USE bug39182;
+CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
+  DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
+
+DELIMITER //;
+
+CREATE PROCEDURE p1()
+BEGIN
+  DECLARE s1 VARCHAR(255);
+  SET s1= "test";
+  CREATE TEMPORARY TABLE tmp1
+    SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
+  SELECT 
+    COLLATION(NAME_CONST('s1', _utf8'test')) c1,
+    COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
+    COLLATION(s1) c3,
+    COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
+    COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
+    COERCIBILITY(s1) d3;
+  DROP TEMPORARY TABLE tmp1;
+END//
+
+DELIMITER ;//
+
+CALL p1();
+source include/show_binlog_events.inc;
+
+DROP PROCEDURE p1;
+DROP TABLE t1;
+DROP DATABASE bug39182;
+USE test;
+
 --echo End of 5.0 tests
 
 # Test of a too big SET INSERT_ID: see if the truncated value goes

mysql-test/extra/binlog_tests/blackhole.test

@@ -139,15 +139,6 @@ drop table t1,t2,t3;
 #             table
 #
 CREATE TABLE t1(a INT) ENGINE=BLACKHOLE;
-# NOTE: After exchanging open_ltable() by open_and_lock_tables() in
-# handle_delayed_insert() to fix problems with MERGE tables (Bug#26379),
-# problems with INSERT DELAYED and BLACKHOLE popped up. open_ltable()
-# does not check if the binlogging capabilities of the statement and the
-# table match. So the below used to succeed. But since INSERT DELAYED
-# switches to row-based logging in mixed-mode and BLACKHOLE cannot do
-# row-based logging, it could not really work. Until this problem is
-# correctly fixed, we have that error here.
---error ER_BINLOG_LOGGING_IMPOSSIBLE
 INSERT DELAYED INTO t1 VALUES(1);
 DROP TABLE t1;
 

mysql-test/extra/rpl_tests/rpl_blackhole.test

+# Check replication of one statement assuming that the engine on the
+# slave is a blackhole engine.
+
+# Input:
+# $statement    Statement to evaluate, it is assumed to change t1
+
+# 1. Evaluate statement on master, it is assumed to change t1
+# 2. Wait for statement to be processed on slave
+# 3. SELECT from table t1 to see what was written
+# 4. Compare position on slave before executing statement and after
+#    executing statement. If difference is >0, then something was
+#    written to the binary log on the slave.
+
+connection slave;
+let $before = query_get_value("SHOW MASTER STATUS", Position, 1);
+
+--echo [on master]
+connection master;
+eval $statement;
+
+--echo [on slave]
+sync_slave_with_master;
+--echo # Expect 0
+SELECT COUNT(*) FROM t1;
+let $after = query_get_value("SHOW MASTER STATUS", Position, 1);
+let $something_written = `select $after - $before != 0`;
+if ($something_written) {
+  --echo >>> Something was written to binary log <<<
+}
+if (!$something_written) {
+  --echo >>> Nothing was written to binary log <<<
+}

mysql-test/include/mix1.inc

@@ -1256,6 +1256,7 @@ connect (con1,localhost,root,,);
 connect (con2,localhost,root,,);
 SET SESSION AUTOCOMMIT = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
+set binlog_format=mixed;
 --echo # Switch to connection con1
 connection con1;
 

mysql-test/lib/mtr_report.pl

@@ -312,7 +312,7 @@ sub mtr_report_stats ($) {
 		/Slave: According to the master's version/ or
 		/Slave: Column [0-9]* type mismatch/ or
 		/Slave: Error .* doesn't exist/ or
-		/Slave: Error .*Deadlock found/ or
+		/Slave: Deadlock found/ or
 		/Slave: Error .*Unknown table/ or
 		/Slave: Error in Write_rows event: / or
 		/Slave: Field .* of table .* has no default value/ or

mysql-test/r/ctype_cp932_binlog_stm.result

@@ -40,9 +40,9 @@ IN ind DECIMAL(10,2))
 BEGIN
 INSERT INTO t4 VALUES (ins1, ins2, ind);
 END
-master-bin.000001	784	Query	1	992	use `test`; INSERT INTO t4 VALUES ( NAME_CONST('ins1',_latin1 0x466F6F2773206120426172),  NAME_CONST('ins2',_cp932 0xED40ED41ED42),  NAME_CONST('ind',47.93))
-master-bin.000001	992	Query	1	1081	use `test`; DROP PROCEDURE bug18293
-master-bin.000001	1081	Query	1	1160	use `test`; DROP TABLE t4
+master-bin.000001	784	Query	1	1048	use `test`; INSERT INTO t4 VALUES ( NAME_CONST('ins1',_latin1 0x466F6F2773206120426172 COLLATE 'latin1_swedish_ci'),  NAME_CONST('ins2',_cp932 0xED40ED41ED42 COLLATE 'cp932_japanese_ci'),  NAME_CONST('ind',47.93))
+master-bin.000001	1048	Query	1	1137	use `test`; DROP PROCEDURE bug18293
+master-bin.000001	1137	Query	1	1216	use `test`; DROP TABLE t4
 End of 5.0 tests
 SHOW BINLOG EVENTS FROM 364;
 ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error

mysql-test/r/federated_bug_25714.result

@@ -9,7 +9,9 @@ DROP DATABASE IF EXISTS federated;
 CREATE DATABASE federated;
 DROP DATABASE IF EXISTS federated;
 CREATE DATABASE federated;
-SET @OLD_CONCURRENT_INSERT= @@GLOBAL.CONCURRENT_INSERT;
+SET @OLD_MASTER_CONCURRENT_INSERT= @@GLOBAL.CONCURRENT_INSERT;
+SET @@GLOBAL.CONCURRENT_INSERT= 0;
+SET @OLD_SLAVE_CONCURRENT_INSERT= @@GLOBAL.CONCURRENT_INSERT;
 SET @@GLOBAL.CONCURRENT_INSERT= 0;
 DROP TABLE IF EXISTS federated.bug_13118_table;
 CREATE TABLE federated.t1 (
@@ -51,9 +53,10 @@ id	value
 7	54
 8	55
 DROP TABLE federated.t1;
+SET @@GLOBAL.CONCURRENT_INSERT= @OLD_MASTER_CONCURRENT_INSERT;
 DROP TABLE federated.t1;
+SET @@GLOBAL.CONCURRENT_INSERT= @OLD_SLAVE_CONCURRENT_INSERT;
 DROP TABLE IF EXISTS federated.t1;
 DROP DATABASE IF EXISTS federated;
 DROP TABLE IF EXISTS federated.t1;
 DROP DATABASE IF EXISTS federated;
-SET @@GLOBAL.CONCURRENT_INSERT= @OLD_CONCURRENT_INSERT;

mysql-test/r/func_group.result

@@ -1416,4 +1416,41 @@ SELECT AVG(a), CAST(AVG(a) AS DECIMAL) FROM t1;
 AVG(a)	CAST(AVG(a) AS DECIMAL)
 15	15
 DROP TABLE t1;
+CREATE TABLE derived1 (a bigint(21));
+INSERT INTO derived1 VALUES (2);
+CREATE TABLE D (
+pk int(11) NOT NULL AUTO_INCREMENT,
+int_nokey int(11) DEFAULT NULL,
+int_key int(11) DEFAULT NULL,
+filler blob,
+PRIMARY KEY (pk),
+KEY int_key (int_key)
+);
+INSERT INTO D VALUES 
+(39,40,4,repeat('  X', 42)),
+(43,56,4,repeat('  X', 42)),
+(47,12,4,repeat('  X', 42)),
+(71,28,4,repeat('  X', 42)),
+(76,54,4,repeat('  X', 42)),
+(83,45,4,repeat('  X', 42)),
+(105,53,12,NULL);
+SELECT 
+(SELECT COUNT( int_nokey ) 
+FROM derived1 AS X 
+WHERE 
+X.int_nokey < 61 
+GROUP BY pk 
+LIMIT 1) 
+FROM D AS X 
+WHERE X.int_key < 13  
+GROUP BY int_nokey LIMIT 1;
+(SELECT COUNT( int_nokey ) 
+FROM derived1 AS X 
+WHERE 
+X.int_nokey < 61 
+GROUP BY pk 
+LIMIT 1)
+1
+DROP TABLE derived1;
+DROP TABLE D;
 End of 5.0 tests

mysql-test/r/innodb-semi-consistent.result

 drop table if exists t1;
+set binlog_format=mixed;
 set session transaction isolation level read committed;
 create table t1(a int not null) engine=innodb DEFAULT CHARSET=latin1;
 insert into t1 values (1),(2),(3),(4),(5),(6),(7);
@@ -6,6 +7,7 @@ set autocommit=0;
 select * from t1 where a=3 lock in share mode;
 a
 3
+set binlog_format=mixed;
 set session transaction isolation level read committed;
 set autocommit=0;
 update t1 set a=10 where a=5;

mysql-test/r/innodb.result

@@ -1024,6 +1024,7 @@ id	code	name
 4	2	Erik
 5	3	Sasha
 COMMIT;
+SET binlog_format='MIXED';
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
 insert into t1 (code, name) values (3, 'Jeremy'), (4, 'Matt');
@@ -2961,9 +2962,11 @@ drop table t1,t2;
 create table t1(a int not null, b int, primary key(a)) engine=innodb;
 insert into t1 values(1,1),(2,2),(3,1),(4,2),(5,1),(6,2),(7,3);
 commit;
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 update t1 set b = 5 where b = 1;
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 select * from t1 where a = 7 and b = 3 for update;
@@ -3002,6 +3005,7 @@ d	e
 3	1
 8	6
 12	1
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 insert into t1 select * from t2;
@@ -3032,30 +3036,39 @@ a	b
 3	1
 8	6
 12	1
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL SERIALIZABLE;
 insert into t1 select * from t2;
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL SERIALIZABLE;
 update t3 set b = (select b from t2 where a = d);
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL SERIALIZABLE;
 create table t4(a int not null, b int, primary key(a)) engine=innodb select * from t2;
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 insert into t5 (select * from t2 lock in share mode);
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 update t6 set e = (select b from t2 where a = d lock in share mode);
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 create table t7(a int not null, b int, primary key(a)) engine=innodb select * from t2 lock in share mode;
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 insert into t8 (select * from t2 for update);
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 update t9 set e = (select b from t2 where a = d for update);
+SET binlog_format='MIXED';
 set autocommit = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 create table t10(a int not null, b int, primary key(a)) engine=innodb select * from t2 for update;
@@ -3202,6 +3215,7 @@ id
 -10
 1
 DROP TABLE t1;
+SET binlog_format='MIXED';
 SET TX_ISOLATION='read-committed';
 SET AUTOCOMMIT=0;
 DROP TABLE IF EXISTS t1, t2;
@@ -3212,6 +3226,7 @@ CREATE TABLE t1 ( a int ) ENGINE=InnoDB;
 CREATE TABLE t2 LIKE t1;
 SELECT * FROM t2;
 a
+SET binlog_format='MIXED';
 SET TX_ISOLATION='read-committed';
 SET AUTOCOMMIT=0;
 INSERT INTO t1 VALUES (1);
@@ -3219,10 +3234,12 @@ COMMIT;
 SELECT * FROM t1 WHERE a=1;
 a
 1
+SET binlog_format='MIXED';
 SET TX_ISOLATION='read-committed';
 SET AUTOCOMMIT=0;
 SELECT * FROM t2;
 a
+SET binlog_format='MIXED';
 SET TX_ISOLATION='read-committed';
 SET AUTOCOMMIT=0;
 INSERT INTO t1 VALUES (2);

mysql-test/r/innodb_mysql.result

@@ -1512,6 +1512,7 @@ ok
 drop table t1;
 SET SESSION AUTOCOMMIT = 0;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
+set binlog_format=mixed;
 # Switch to connection con1
 CREATE TABLE t1 (a INT PRIMARY KEY, b VARCHAR(256))
 ENGINE = InnoDB;

mysql-test/r/join.result

@@ -748,12 +748,12 @@ ERROR 42S22: Unknown column 't1.b' in 'field list'
 select * from v1a join v1b on t1.b = t2.b;
 ERROR 42S22: Unknown column 't1.b' in 'on clause'
 select 
-statistics.TABLE_NAME, statistics.COLUMN_NAME, statistics.TABLE_CATALOG, statistics.TABLE_SCHEMA, statistics.NON_UNIQUE, statistics.INDEX_SCHEMA, statistics.INDEX_NAME, statistics.SEQ_IN_INDEX, statistics.COLLATION, statistics.CARDINALITY, statistics.SUB_PART, statistics.PACKED, statistics.NULLABLE, statistics.INDEX_TYPE, statistics.COMMENT, 
+statistics.TABLE_NAME, statistics.COLUMN_NAME, statistics.TABLE_CATALOG, statistics.TABLE_SCHEMA, statistics.NON_UNIQUE, statistics.INDEX_SCHEMA, statistics.INDEX_NAME, statistics.SEQ_IN_INDEX, statistics.COLLATION, statistics.SUB_PART, statistics.PACKED, statistics.NULLABLE, statistics.INDEX_TYPE, statistics.COMMENT, 
 columns.TABLE_CATALOG, columns.TABLE_SCHEMA, columns.COLUMN_DEFAULT, columns.IS_NULLABLE, columns.DATA_TYPE, columns.CHARACTER_MAXIMUM_LENGTH, columns.CHARACTER_OCTET_LENGTH, columns.NUMERIC_PRECISION, columns.NUMERIC_SCALE, columns.CHARACTER_SET_NAME, columns.COLLATION_NAME, columns.COLUMN_TYPE, columns.COLUMN_KEY, columns.EXTRA, columns.COLUMN_COMMENT
 from information_schema.statistics join information_schema.columns using(table_name,column_name) where table_name='user';
-TABLE_NAME	COLUMN_NAME	TABLE_CATALOG	TABLE_SCHEMA	NON_UNIQUE	INDEX_SCHEMA	INDEX_NAME	SEQ_IN_INDEX	COLLATION	CARDINALITY	SUB_PART	PACKED	NULLABLE	INDEX_TYPE	COMMENT	TABLE_CATALOG	TABLE_SCHEMA	COLUMN_DEFAULT	IS_NULLABLE	DATA_TYPE	CHARACTER_MAXIMUM_LENGTH	CHARACTER_OCTET_LENGTH	NUMERIC_PRECISION	NUMERIC_SCALE	CHARACTER_SET_NAME	COLLATION_NAME	COLUMN_TYPE	COLUMN_KEY	EXTRA	COLUMN_COMMENT
-user	Host	NULL	mysql	0	mysql	PRIMARY	1	A	NULL	NULL	NULL		BTREE		NULL	mysql		NO	char	60	180	NULL	NULL	utf8	utf8_bin	char(60)	PRI		
-user	User	NULL	mysql	0	mysql	PRIMARY	2	A	3	NULL	NULL		BTREE		NULL	mysql		NO	char	16	48	NULL	NULL	utf8	utf8_bin	char(16)	PRI		
+TABLE_NAME	COLUMN_NAME	TABLE_CATALOG	TABLE_SCHEMA	NON_UNIQUE	INDEX_SCHEMA	INDEX_NAME	SEQ_IN_INDEX	COLLATION	SUB_PART	PACKED	NULLABLE	INDEX_TYPE	COMMENT	TABLE_CATALOG	TABLE_SCHEMA	COLUMN_DEFAULT	IS_NULLABLE	DATA_TYPE	CHARACTER_MAXIMUM_LENGTH	CHARACTER_OCTET_LENGTH	NUMERIC_PRECISION	NUMERIC_SCALE	CHARACTER_SET_NAME	COLLATION_NAME	COLUMN_TYPE	COLUMN_KEY	EXTRA	COLUMN_COMMENT
+user	Host	NULL	mysql	0	mysql	PRIMARY	1	A	NULL	NULL		BTREE		NULL	mysql		NO	char	60	180	NULL	NULL	utf8	utf8_bin	char(60)	PRI		
+user	User	NULL	mysql	0	mysql	PRIMARY	2	A	NULL	NULL		BTREE		NULL	mysql		NO	char	16	48	NULL	NULL	utf8	utf8_bin	char(16)	PRI		
 drop table t1;
 drop table t2;
 drop table t3;

mysql-test/r/log_basic.result

@@ -5,8 +5,8 @@ INIT_VALUE
 SELECT @@log AS INIT_VALUE;
 INIT_VALUE
 1
-SET @@global.log = ON;
-SET global log = 0;
+SET @@global.general_log = ON;
+SET global general_log = 0;
 'Bug# 34832: log is a system but it is not accessible using SET @@global.log;'
 'SET GLOBAL log; and SELECT @@global.log. SHOW VARIABLES shows the value of log.'
 '#--------------------FN_DYNVARS_062_02-------------------------#'

mysql-test/r/log_bin_trust_routine_creators_basic.result

@@ -5,17 +5,17 @@ SELECT @start_global_value;
 '#--------------------FN_DYNVARS_064_01-------------------------#'
 SET @@global.log_bin_trust_routine_creators = TRUE;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SET @@global.log_bin_trust_routine_creators = DEFAULT;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 0
 '#--------------------FN_DYNVARS_064_02-------------------------#'
 SET @@global.log_bin_trust_routine_creators = DEFAULT;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators = 'FALSE';
 @@global.log_bin_trust_routine_creators = 'FALSE'
 1
@@ -24,37 +24,37 @@ Warning	1292	Truncated incorrect DOUBLE value: 'FALSE'
 '#--------------------FN_DYNVARS_064_03-------------------------#'
 SET @@global.log_bin_trust_routine_creators = ON;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 1
 SET @@global.log_bin_trust_routine_creators = OFF;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 0
 SET @@global.log_bin_trust_routine_creators = 0;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 0
 SET @@global.log_bin_trust_routine_creators = 1;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 1
 SET @@global.log_bin_trust_routine_creators = TRUE;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 1
 SET @@global.log_bin_trust_routine_creators = FALSE;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 0
@@ -70,7 +70,7 @@ SET @@global.log_bin_trust_routine_creators = "OFFF";
 ERROR 42000: Variable 'log_bin_trust_routine_creators' can't be set to the value of 'OFFF'
 SET @@global.log_bin_trust_routine_creators = OF;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 0
@@ -96,14 +96,14 @@ ERROR HY000: Variable 'log_bin_trust_routine_creators' is a GLOBAL variable
 '#---------------------FN_DYNVARS_064_07----------------------#'
 SET @@global.log_bin_trust_routine_creators = TRUE;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@log_bin_trust_routine_creators = @@global.log_bin_trust_routine_creators;
 @@log_bin_trust_routine_creators = @@global.log_bin_trust_routine_creators
 1
 '#---------------------FN_DYNVARS_064_08----------------------#'
 SET @@global.log_bin_trust_routine_creators = TRUE;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@log_bin_trust_routine_creators;
 @@log_bin_trust_routine_creators
 1
@@ -115,7 +115,7 @@ SELECT log_bin_trust_routine_creators = @@session.log_bin_trust_routine_creators
 ERROR 42S22: Unknown column 'log_bin_trust_routine_creators' in 'field list'
 SET @@global.log_bin_trust_routine_creators = @start_global_value;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 SELECT @@global.log_bin_trust_routine_creators;
 @@global.log_bin_trust_routine_creators
 1

mysql-test/r/log_state.result

@@ -187,6 +187,8 @@ SELECT @@general_log, @@log;
 @@general_log	@@log
 1	1
 SET GLOBAL log = 0;
+Warnings:
+Warning	1287	The syntax '@@log' is deprecated and will be removed in MySQL 7.0. Please use '@@general_log' instead
 SHOW VARIABLES LIKE 'general_log';
 Variable_name	Value
 general_log	OFF
@@ -216,6 +218,8 @@ SELECT @@slow_query_log, @@log_slow_queries;
 @@slow_query_log	@@log_slow_queries
 0	0
 SET GLOBAL log_slow_queries = 0;
+Warnings:
+Warning	1287	The syntax '@@log_slow_queries' is deprecated and will be removed in MySQL 7.0. Please use '@@slow_query_log' instead
 SHOW VARIABLES LIKE 'slow_query_log';
 Variable_name	Value
 slow_query_log	OFF
@@ -270,4 +274,28 @@ SET GLOBAL general_log_file = @general_log_file_saved;
 SET GLOBAL slow_query_log_file = @slow_query_log_file_saved;
 
 # -- End of Bug#32748.
+deprecated:
+SET GLOBAL log = 0;
+Warnings:
+Warning	1287	The syntax '@@log' is deprecated and will be removed in MySQL 7.0. Please use '@@general_log' instead
+SET GLOBAL log_slow_queries = 0;
+Warnings:
+Warning	1287	The syntax '@@log_slow_queries' is deprecated and will be removed in MySQL 7.0. Please use '@@slow_query_log' instead
+SET GLOBAL log = DEFAULT;
+Warnings:
+Warning	1287	The syntax '@@log' is deprecated and will be removed in MySQL 7.0. Please use '@@general_log' instead
+SET GLOBAL log_slow_queries = DEFAULT;
+Warnings:
+Warning	1287	The syntax '@@log_slow_queries' is deprecated and will be removed in MySQL 7.0. Please use '@@slow_query_log' instead
+not deprecated:
+SELECT @@global.general_log_file INTO @my_glf;
+SELECT @@global.slow_query_log_file INTO @my_sqlf;
+SET GLOBAL general_log = 0;
+SET GLOBAL slow_query_log = 0;
+SET GLOBAL general_log_file = 'WL4403_G.log';
+SET GLOBAL slow_query_log_file = 'WL4403_SQ.log';
+SET GLOBAL general_log_file = @my_glf;
+SET GLOBAL slow_query_log_file = @my_sqlf;
+SET GLOBAL general_log = DEFAULT;
+SET GLOBAL slow_query_log = DEFAULT;
 End of 5.1 tests

mysql-test/r/partition.result

@@ -1448,13 +1448,15 @@ create trigger t_ad after delete on t for each row insert into t values (old.s1)
 insert into t values (1);
 drop table t;
 USE mysql;
+TRUNCATE TABLE general_log;
+SET @old_general_log_state = @@global.general_log;
 SET GLOBAL general_log = 0;
 ALTER TABLE general_log ENGINE = MyISAM;
 ALTER TABLE general_log PARTITION BY RANGE (TO_DAYS(event_time))
 (PARTITION p0 VALUES LESS THAN (733144), PARTITION p1 VALUES LESS THAN (3000000));
 ERROR HY000: Incorrect usage of PARTITION and log table
 ALTER TABLE general_log ENGINE = CSV;
-SET GLOBAL general_log = default;
+SET GLOBAL general_log = @old_general_log_state;
 use test;
 create table t2 (b int);
 create table t1 (b int)
@@ -1637,4 +1639,93 @@ select count(*) from t1, t2 where t1.createdDate = t2.createdDate;
 count(*)
 1
 drop table t1, t2;
+SET @orig_sql_mode = @@SQL_MODE;
+SET SQL_MODE='STRICT_ALL_TABLES,ERROR_FOR_DIVISION_BY_ZERO';
+CREATE TABLE t1 (c1 INT)
+PARTITION BY LIST(1 DIV c1) (
+PARTITION p0 VALUES IN (NULL),
+PARTITION p1 VALUES IN (1)
+);
+INSERT INTO t1 VALUES (0);
+ERROR 22012: Division by 0
+SELECT * FROM t1;
+c1
+TRUNCATE t1;
+INSERT INTO t1 VALUES (NULL), (0), (1), (2);
+ERROR 22012: Division by 0
+SELECT * FROM t1;
+c1
+NULL
+DROP TABLE t1;
+SET SQL_MODE= @orig_sql_mode;
+create table t1 (s1 int) partition by hash(s1) partitions 2;
+create index i on t1 (s1);
+insert into t1 values (1);
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1 order by s1 desc;
+select * from t1;
+s1
+1
+1
+1
+1
+1
+1
+1
+1
+drop table t1;
+create table t1 (s1 int) partition by range(s1) 
+(partition pa1 values less than (10),
+partition pa2 values less than MAXVALUE);
+create index i on t1 (s1);
+insert into t1 values (1);
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1 order by s1 desc;
+select * from t1;
+s1
+1
+1
+1
+1
+1
+1
+1
+1
+drop table t1;
+create table t1 (s1 int) partition by range(s1) 
+(partition pa1 values less than (10),
+partition pa2 values less than MAXVALUE);
+create index i on t1 (s1);
+insert into t1 values (20);
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1 order by s1 desc;
+select * from t1;
+s1
+20
+20
+20
+20
+20
+20
+20
+20
+drop table t1;
+create table t1 (s1 int) partition by range(s1) 
+(partition pa1 values less than (10),
+partition pa2 values less than MAXVALUE);
+create index i on t1 (s1);
+insert into t1 values (1), (2), (3), (4), (5), (6), (7), (8);
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1;
+insert into t1 select s1 from t1 order by s1 desc;
+insert into t1 select s1 from t1 where s1=3;
+select count(*) from t1;
+count(*)
+288
+drop table t1;
 End of 5.1 tests

mysql-test/r/slow_launch_time_func.result

 SET @global_slow_launch_time = @@GLOBAL.slow_launch_time;
-'#--------------------FN_DYNVARS_124_01-------------------------#'
 ** Connection default **
+'#--------------------FN_DYNVARS_124_01-------------------------#'
 SET @@GLOBAL.slow_launch_time=0;
 SELECT @@GLOBAL.slow_launch_time;
 @@GLOBAL.slow_launch_time
 0
-** Connecting conn5 using username 'root' **
-** Connecting conn6 using username 'root' **
-** Connecting conn7 using username 'root' **
-** Connecting conn8 using username 'root' **
-** Connecting conn9 using username 'root' **
-** Connecting conn10 using username 'root' **
-** Connecting conn11 using username 'root' **
-** Connecting conn12 using username 'root' **
-** Connecting conn13 using username 'root' **
-** Connecting conn14 using username 'root' **
-** Connecting conn15 using username 'root' **
-** Connecting conn16 using username 'root' **
-show status like 'slow_launch_threads';
-Variable_name	Value
-Slow_launch_threads	12
-12 Expected
-** Connection default **
-** Disconnecting conn5 **
-** Disconnecting conn6 **
-** Disconnecting conn7 **
-** Disconnecting conn8 **
-** Disconnecting conn9 **
-** Disconnecting conn10 **
-** Disconnecting conn11 **
-** Disconnecting conn12 **
-** Disconnecting conn13 **
-** Disconnecting conn14 **
-** Disconnecting conn15 **
-** Disconnecting conn16 **
+** Connecting conn1 using username 'root' **
+** Switch to connection default and disconnect conn1 **
+'#--------------------FN_DYNVARS_124_02-------------------------#'
+SET @@GLOBAL.slow_launch_time= 1000;
+SELECT @@GLOBAL.slow_launch_time;
+@@GLOBAL.slow_launch_time
+1000
+** Connecting conn2 using username 'root' **
+** Switch to connection default and disconnect conn2 **
 SET @@GLOBAL.slow_launch_time = @global_slow_launch_time;

mysql-test/r/trigger-trans.result

@@ -161,3 +161,32 @@ SELECT @a, @b;
 1	1
 DROP TABLE t2, t1;
 End of 5.0 tests
+BUG#31612
+Trigger fired multiple times leads to gaps in auto_increment sequence
+create table t1 (a int, val char(1)) engine=InnoDB;
+create table t2 (b int auto_increment primary key,
+val char(1)) engine=InnoDB;
+create trigger t1_after_insert after
+insert on t1 for each row insert into t2 set val=NEW.val;
+insert into t1 values ( 123, 'a'), ( 123, 'b'), ( 123, 'c'),
+(123, 'd'), (123, 'e'), (123, 'f'), (123, 'g');
+insert into t1 values ( 654, 'a'), ( 654, 'b'), ( 654, 'c'),
+(654, 'd'), (654, 'e'), (654, 'f'), (654, 'g');
+select * from t2 order by b;
+b	val
+1	a
+2	b
+3	c
+4	d
+5	e
+6	f
+7	g
+8	a
+9	b
+10	c
+11	d
+12	e
+13	f
+14	g
+drop trigger t1_after_insert;
+drop table t1,t2;

mysql-test/r/tx_isolation_func.result

@@ -21,8 +21,10 @@ INSERT INTO t1 VALUES(24, 24);
 '#----------------------------FN_DYNVARS_184_01--------------------------------------#'
 ** Connection con0 **
 SET SESSION tx_isolation = 'READ-UNCOMMITTED';
+set binlog_format=mixed;
 ** Connection con1 **
 SET SESSION tx_isolation = 'READ-UNCOMMITTED';
+set binlog_format=mixed;
 ** Connection con0 **
 START TRANSACTION;
 SELECT * FROM t1 WHERE a IN (2,4,6,8) FOR UPDATE;

mysql-test/r/warnings.result

@@ -167,7 +167,7 @@ max_error_count	10
 drop table t1;
 set table_type=MYISAM;
 Warnings:
-Warning	1287	The syntax 'table_type' is deprecated and will be removed in MySQL 5.2. Please use 'storage_engine' instead
+Warning	1287	The syntax '@@table_type' is deprecated and will be removed in MySQL 5.2. Please use '@@storage_engine' instead
 create table t1 (a int);
 insert into t1 (a) values (1), (2), (3), (4), (5), (6), (7), (8), (9), (10);
 update t1 set a='abc';

mysql-test/suite/binlog/r/binlog_multi_engine.result

@@ -43,8 +43,6 @@ INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
-UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
 TRUNCATE t1m;
 TRUNCATE t1b;
 TRUNCATE t1n;
@@ -68,20 +66,21 @@ RESET MASTER;
 SET SESSION BINLOG_FORMAT=ROW;
 INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
-ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
-UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
-ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
+ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1m)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
 master-bin.000001	#	Query	#	#	use `test`; COMMIT
+master-bin.000001	#	Query	#	#	use `test`; BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1b)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	use `test`; COMMIT
 master-bin.000001	#	Query	#	#	BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1n)
 master-bin.000001	#	Table_map	#	#	table_id: # (mysql.ndb_apply_status)

mysql-test/suite/binlog/r/binlog_row_binlog.result

@@ -1090,6 +1090,53 @@ master-bin.000001	295	Table_map	1	337	table_id: # (test.t1)
 master-bin.000001	337	Write_rows	1	383	table_id: # flags: STMT_END_F
 master-bin.000001	383	Query	1	452	use `test`; COMMIT
 master-bin.000001	452	Query	1	528	use `test`; drop table t1
+reset master;
+CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
+USE bug39182;
+CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
+DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
+CREATE PROCEDURE p1()
+BEGIN
+DECLARE s1 VARCHAR(255);
+SET s1= "test";
+CREATE TEMPORARY TABLE tmp1
+SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
+SELECT 
+COLLATION(NAME_CONST('s1', _utf8'test')) c1,
+COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
+COLLATION(s1) c3,
+COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
+COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
+COERCIBILITY(s1) d3;
+DROP TEMPORARY TABLE tmp1;
+END//
+CALL p1();
+c1	c2	c3	d1	d2	d3
+utf8_general_ci	utf8_unicode_ci	utf8_unicode_ci	2	2	2
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci
+master-bin.000001	#	Query	#	#	use `bug39182`; CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
+DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci
+master-bin.000001	#	Query	#	#	use `bug39182`; CREATE DEFINER=`root`@`localhost` PROCEDURE `p1`()
+BEGIN
+DECLARE s1 VARCHAR(255);
+SET s1= "test";
+CREATE TEMPORARY TABLE tmp1
+SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
+SELECT 
+COLLATION(NAME_CONST('s1', _utf8'test')) c1,
+COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
+COLLATION(s1) c3,
+COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
+COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
+COERCIBILITY(s1) d3;
+DROP TEMPORARY TABLE tmp1;
+END
+DROP PROCEDURE p1;
+DROP TABLE t1;
+DROP DATABASE bug39182;
+USE test;
 End of 5.0 tests
 reset master;
 create table t1 (id tinyint auto_increment primary key);

mysql-test/suite/binlog/r/binlog_stm_binlog.result

@@ -594,6 +594,56 @@ master-bin.000001	4	Format_desc	1	106	Server version, Binlog ver: 4
 master-bin.000001	106	Query	1	227	use `test`; create table t1 (a bigint unsigned, b bigint(20) unsigned)
 master-bin.000001	227	Query	1	351	use `test`; insert into t1 values (9999999999999999,14632475938453979136)
 master-bin.000001	351	Query	1	427	use `test`; drop table t1
+reset master;
+CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
+USE bug39182;
+CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
+DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
+CREATE PROCEDURE p1()
+BEGIN
+DECLARE s1 VARCHAR(255);
+SET s1= "test";
+CREATE TEMPORARY TABLE tmp1
+SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
+SELECT 
+COLLATION(NAME_CONST('s1', _utf8'test')) c1,
+COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
+COLLATION(s1) c3,
+COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
+COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
+COERCIBILITY(s1) d3;
+DROP TEMPORARY TABLE tmp1;
+END//
+CALL p1();
+c1	c2	c3	d1	d2	d3
+utf8_general_ci	utf8_unicode_ci	utf8_unicode_ci	2	2	2
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci
+master-bin.000001	#	Query	#	#	use `bug39182`; CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
+DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci
+master-bin.000001	#	Query	#	#	use `bug39182`; CREATE DEFINER=`root`@`localhost` PROCEDURE `p1`()
+BEGIN
+DECLARE s1 VARCHAR(255);
+SET s1= "test";
+CREATE TEMPORARY TABLE tmp1
+SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
+SELECT 
+COLLATION(NAME_CONST('s1', _utf8'test')) c1,
+COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
+COLLATION(s1) c3,
+COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
+COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
+COERCIBILITY(s1) d3;
+DROP TEMPORARY TABLE tmp1;
+END
+master-bin.000001	#	Query	#	#	use `bug39182`; CREATE TEMPORARY TABLE tmp1
+SELECT * FROM t1 WHERE a LIKE CONCAT("%",  NAME_CONST('s1',_utf8'test' COLLATE 'utf8_unicode_ci'), "%")
+master-bin.000001	#	Query	#	#	use `bug39182`; DROP TEMPORARY TABLE tmp1
+DROP PROCEDURE p1;
+DROP TABLE t1;
+DROP DATABASE bug39182;
+USE test;
 End of 5.0 tests
 reset master;
 create table t1 (id tinyint auto_increment primary key);

mysql-test/suite/binlog/r/binlog_stm_blackhole.result

@@ -141,7 +141,6 @@ master-bin.000001	#	Query	#	#	use `test`; COMMIT
 drop table t1,t2,t3;
 CREATE TABLE t1(a INT) ENGINE=BLACKHOLE;
 INSERT DELAYED INTO t1 VALUES(1);
-ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
 DROP TABLE t1;
 CREATE TABLE t1(a INT, b INT) ENGINE=BLACKHOLE;
 DELETE FROM t1 WHERE a=10;

mysql-test/suite/binlog/t/binlog_multi_engine.test

@@ -69,9 +69,6 @@ UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 #UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
-UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-
 TRUNCATE t1m;
 TRUNCATE t1b;
 TRUNCATE t1n;
@@ -83,12 +80,10 @@ RESET MASTER;
 SET SESSION BINLOG_FORMAT=ROW;
 
 INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
-UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
 error ER_BINLOG_LOGGING_IMPOSSIBLE;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 

mysql-test/suite/funcs_1/storedproc/param_check.inc

+# suite/funcs_1/storedproc/param_check.inc
+#
+# Auxiliary routine to be sourced by
+# suite/funcs_1/t/storedproc.test
+#
+# Purpose:
+#    The assignment of float values to objects of type DECIMAL causes
+#    conversions and in some cases an adjustment of the value to
+#    a border of the value range.
+#    Try to reveal that function and procedure parameters get a similar
+#    mangling of the value like columns.
+#    
+# Variables to be set before sourcing this routine
+#    $test_value  - value to be checked
+#
+# Created:
+# 2008-08-27 mleich
+#
+
+eval UPDATE t1_aux SET f1 = NULL;
+# Enforce that all user variables have the same data type and initial value.
+SELECT f1,f1,f1,f1 INTO @v1_tab,@v1_proc,@v2_proc,@v1_func FROM t1_aux;
+
+eval UPDATE t1_aux SET f1 = $test_value;
+SELECT f1 INTO @v1_tab FROM t1_aux;
+eval CALL sproc_1($test_value, @v1_proc);
+eval SET @v1_func = func_1($test_value);
+
+if (`SELECT @v1_tab <> @v1_proc OR @v1_tab <> @v2_proc OR @v1_tab <> @v1_func`)
+{
+   --echo Error: @v1_tab, @v1_proc, @v2_proc, @v1_func are not all equal
+   SELECT @v1_tab, @v1_proc, @v2_proc, @v1_func;
+}

mysql-test/suite/funcs_1/t/innodb_storedproc.test

-#### suite/funcs_1/t/innodb_storedproc.test
-#
-
-# This test cannot be used for the embedded server because we check here
-# privileges.
---source include/not_embedded.inc
-
---source include/have_innodb.inc
-let $engine_type= innodb;
-
---source suite/funcs_1/storedproc/load_sp_tb.inc
-
---source suite/funcs_1/storedproc/storedproc_master.inc

mysql-test/suite/funcs_1/t/memory_storedproc.test

-#### suite/funcs_1/t/memory_storedproc.test
-#
-
-# This test cannot be used for the embedded server because we check here
-# privileges.
---source include/not_embedded.inc
-
-SET @@session.sql_mode = 'NO_ENGINE_SUBSTITUTION';
-let $engine_type= memory;
-
---source suite/funcs_1/storedproc/load_sp_tb.inc
-
---source suite/funcs_1/storedproc/storedproc_master.inc

mysql-test/suite/funcs_1/t/myisam_storedproc.test

-#### suite/funcs_1/t/myisam_storedproc.test
-#
-
-# This test cannot be used for the embedded server because we check here
-# privileges.
---source include/not_embedded.inc
-
-SET @@session.sql_mode = 'NO_ENGINE_SUBSTITUTION';
-let $engine_type= myisam;
-
---source suite/funcs_1/storedproc/load_sp_tb.inc
-
---source suite/funcs_1/storedproc/storedproc_master.inc

mysql-test/suite/funcs_1/t/ndb_storedproc.test

-#### suite/funcs_1/t/ndb_storedproc.test
-#
-
-# This test cannot be used for the embedded server because we check here
-# privileges.
---source include/not_embedded.inc
-
---source include/have_ndb.inc
-let $engine_type= ndb;
-
---source suite/funcs_1/storedproc/load_sp_tb.inc
-
---source suite/funcs_1/storedproc/storedproc_master.inc

mysql-test/suite/funcs_1/views/func_view.inc

@@ -158,10 +158,16 @@ DROP VIEW  IF EXISTS v1;
 
 --disable_query_log
 # Storage for the SELECTs to be used for the VIEW definition
+# Attention: my_select must be no too small because a statement like
+#    SELECT LOAD_FILE(< file in MYSQLTEST_VARDIR >)
+#    AS my_col,
+#    id FROM t1_values';
+#    might be a very long
+# Bug#38427 "Data too long" ... tests "<ENGINE>_func_view" fail
 CREATE TABLE t1_selects
 (
    id BIGINT AUTO_INCREMENT,
-   my_select VARCHAR(200) NOT NULL,
+   my_select VARCHAR(1000) NOT NULL,
    disable_result ENUM('Yes','No') NOT NULL default 'No',
    PRIMARY KEY(id),
    UNIQUE (my_select)

mysql-test/suite/ndb/t/disabled.def

@@ -12,6 +12,5 @@
 partition_03ndb          : BUG#16385 2006-03-24 mikael Partitions: crash when updating a range partitioned NDB table
 
 ndb_partition_error2	 : HF is not sure if the test can work as internded on all the platforms
-ndb_index_ordered        : Bug#38370 The test ndb.ndb_index_ordered fails with the community features on
 
 # the below testcase have been reworked to avoid the bug, test contains comment, keep bug open

mysql-test/suite/parts/t/partition_auto_increment_archive.test

+################################################################################
+# t/partition_auto_increment_archive.test                                      #
+#                                                                              #
+# Purpose:                                                                     #
+#  Tests around auto increment column                                          #
+#        Archive branch                                                        #
+#                                                                              #
+#------------------------------------------------------------------------------#
+# Original Author: MattiasJ                                                    #
+# Original Date: 2008-09-02                                                    #
+# Change Author:                                                               #
+# Change Date:                                                                 #
+# Change:                                                                      #
+################################################################################
+
+#
+# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
+#       TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
+#       THE SOURCED FILES ONLY.
+#
+
+# The server must support partitioning.
+--source include/have_partition.inc
+
+#------------------------------------------------------------------------------#
+# Engine specific settings and requirements
+--source include/have_archive.inc
+# Archve does not support delete
+let $skip_delete= 1;
+let $skip_truncate= 1;
+let $skip_update= 1;
+let $only_ai_pk= 1;
+
+##### Storage engine to be tested
+let $engine= 'Archive';
+
+#------------------------------------------------------------------------------#
+# Execute the tests to be applied to all storage engines
+--source suite/parts/inc/partition_auto_increment.inc
+

mysql-test/suite/parts/t/partition_auto_increment_blackhole.test

+################################################################################
+# t/partition_auto_increment_blackhole.test                                    #
+#                                                                              #
+# Purpose:                                                                     #
+#  Tests around auto increment column                                          #
+#        Blackhole branch                                                      #
+#                                                                              #
+#------------------------------------------------------------------------------#
+# Original Author: MattiasJ                                                    #
+# Original Date: 2008-09-02                                                    #
+# Change Author:                                                               #
+# Change Date:                                                                 #
+# Change:                                                                      #
+################################################################################
+
+#
+# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
+#       TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
+#       THE SOURCED FILES ONLY.
+#
+
+# The server must support partitioning.
+--source include/have_partition.inc
+
+#------------------------------------------------------------------------------#
+# Engine specific settings and requirements
+--source include/have_blackhole.inc
+
+##### Storage engine to be tested
+let $engine= 'Blackhole';
+
+#------------------------------------------------------------------------------#
+# Execute the tests to be applied to all storage engines
+--source suite/parts/inc/partition_auto_increment.inc
+

mysql-test/suite/parts/t/partition_auto_increment_innodb.test

+################################################################################
+# t/partition_auto_increment_innodb.test                                       #
+#                                                                              #
+# Purpose:                                                                     #
+#  Tests around auto increment column                                          #
+#        InnoDB branch                                                         #
+#                                                                              #
+#------------------------------------------------------------------------------#
+# Original Author: MattiasJ                                                    #
+# Original Date: 2008-02-12                                                    #
+# Change Author:                                                               #
+# Change Date:                                                                 #
+# Change:                                                                      #
+################################################################################
+
+#
+# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
+#       TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
+#       THE SOURCED FILES ONLY.
+#
+
+# The server must support partitioning.
+--source include/have_partition.inc
+
+#------------------------------------------------------------------------------#
+# Engine specific settings and requirements
+
+##### Storage engine to be tested
+let $engine= 'InnoDB';
+--source include/have_innodb.inc
+
+#------------------------------------------------------------------------------#
+# Execute the tests to be applied to all storage engines
+--source suite/parts/inc/partition_auto_increment.inc
+

mysql-test/suite/parts/t/partition_auto_increment_memory.test

+################################################################################
+# t/partition_auto_increment_memory.test                                       #
+#                                                                              #
+# Purpose:                                                                     #
+#  Tests around auto increment column                                          #
+#        Memory branch                                                         #
+#                                                                              #
+#------------------------------------------------------------------------------#
+# Original Author: MattiasJ                                                    #
+# Original Date: 2008-02-12                                                    #
+# Change Author:                                                               #
+# Change Date:                                                                 #
+# Change:                                                                      #
+################################################################################
+
+#
+# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
+#       TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
+#       THE SOURCED FILES ONLY.
+#
+
+# The server must support partitioning.
+--source include/have_partition.inc
+
+#------------------------------------------------------------------------------#
+# Engine specific settings and requirements
+
+##### Storage engine to be tested
+let $engine= 'Memory';
+
+#------------------------------------------------------------------------------#
+# Execute the tests to be applied to all storage engines
+--source suite/parts/inc/partition_auto_increment.inc
+

mysql-test/suite/parts/t/partition_auto_increment_myisam.test

+################################################################################
+# t/partition_auto_increment_myisam.test                                       #
+#                                                                              #
+# Purpose:                                                                     #
+#  Tests around auto increment column                                          #
+#        MyISAM branch                                                         #
+#                                                                              #
+#------------------------------------------------------------------------------#
+# Original Author: MattiasJ                                                    #
+# Original Date: 2008-02-12                                                    #
+# Change Author:                                                               #
+# Change Date:                                                                 #
+# Change:                                                                      #
+################################################################################
+
+#
+# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
+#       TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
+#       THE SOURCED FILES ONLY.
+#
+
+# The server must support partitioning.
+--source include/have_partition.inc
+
+#------------------------------------------------------------------------------#
+# Engine specific settings and requirements
+
+##### Storage engine to be tested
+let $engine= 'MyISAM';
+
+#------------------------------------------------------------------------------#
+# Execute the tests to be applied to all storage engines
+--source suite/parts/inc/partition_auto_increment.inc
+

mysql-test/suite/parts/t/partition_auto_increment_ndb.test

+################################################################################
+# t/partition_auto_increment_ndb.test                                          #
+#                                                                              #
+# Purpose:                                                                     #
+#  Tests around auto increment column                                          #
+#        NDB branch                                                            #
+#                                                                              #
+# Note: NDB behavior for auto_increment on secondary column in                 #
+#       multi-column-index is NOT like MyISAM, instead it uses the same        #
+#       behavior as if it was the primary column.                              #
+#------------------------------------------------------------------------------#
+# Original Author: MattiasJ                                                    #
+# Original Date: 2008-09-02                                                    #
+# Change Author:                                                               #
+# Change Date:                                                                 #
+# Change:                                                                      #
+################################################################################
+
+#
+# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
+#       TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
+#       THE SOURCED FILES ONLY.
+#
+
+# The server must support partitioning.
+--source include/have_partition.inc
+
+#------------------------------------------------------------------------------#
+# Engine specific settings and requirements
+--source include/have_ndb.inc
+
+##### Storage engine to be tested
+let $engine= 'NDB';
+connection default;
+#enable hash partitioning
+SET new=on;
+
+#------------------------------------------------------------------------------#
+# Execute the tests to be applied to all storage engines
+--source suite/parts/inc/partition_auto_increment.inc
+

mysql-test/suite/rpl/r/rpl_sp.result

@@ -193,7 +193,7 @@ end|
 ERROR HY000: You do not have the SUPER privilege and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
 set global log_bin_trust_routine_creators=1;
 Warnings:
-Warning	1287	The syntax 'log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use 'log_bin_trust_function_creators' instead
+Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 5.2. Please use '@@log_bin_trust_function_creators' instead
 set global log_bin_trust_function_creators=0;
 set global log_bin_trust_function_creators=1;
 set global log_bin_trust_function_creators=1;
@@ -526,7 +526,7 @@ master-bin.000001	#	Query	1	#	use `test`; DROP TABLE IF EXISTS t1
 master-bin.000001	#	Query	1	#	use `test`; CREATE TABLE t1(col VARCHAR(10))
 master-bin.000001	#	Query	1	#	use `test`; CREATE DEFINER=`root`@`localhost` PROCEDURE `p1`(arg VARCHAR(10))
 INSERT INTO t1 VALUES(arg)
-master-bin.000001	#	Query	1	#	use `test`; INSERT INTO t1 VALUES( NAME_CONST('arg',_latin1'test'))
+master-bin.000001	#	Query	1	#	use `test`; INSERT INTO t1 VALUES( NAME_CONST('arg',_latin1'test' COLLATE 'latin1_swedish_ci'))
 master-bin.000001	#	Query	1	#	use `test`; DROP PROCEDURE p1
 master-bin.000001	#	Query	1	#	use `test`; CREATE DEFINER=`root`@`localhost` PROCEDURE `p1`()
 SET @a = 1
@@ -869,7 +869,7 @@ CREATE DEFINER=`root`@`localhost` PROCEDURE `p1`(arg VARCHAR(10))
 INSERT INTO t1 VALUES(arg)
 /*!*/;
 SET TIMESTAMP=t/*!*/;
-INSERT INTO t1 VALUES( NAME_CONST('arg',_latin1'test'))
+INSERT INTO t1 VALUES( NAME_CONST('arg',_latin1'test' COLLATE 'latin1_swedish_ci'))
 /*!*/;
 SET TIMESTAMP=t/*!*/;
 DROP PROCEDURE p1

mysql-test/suite/rpl/r/rpl_temporary.result

@@ -24,6 +24,9 @@ drop table if exists t1,t2;
 create table t1(f int);
 create table t2(f int);
 insert into t1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10);
+SELECT COUNT(*) FROM t1;
+COUNT(*)
+10
 create temporary table t3(f int);
 insert into t3 select * from t1 where f<6;
 create temporary table t3(f int);

mysql-test/suite/rpl/t/disabled.def

@@ -12,5 +12,4 @@
 
 rpl_redirect               : Failure is sporadic and and the test is superfluous (mats)
 rpl_innodb_bug28430        : Failure on Solaris Bug #36793
-#rpl_temporary              : BUG#38269 2008-07-21 Sven valgrind error in pushbuild
 rpl_flushlog_loop          : BUG#37733 2008-07-23 Sven disabled in 5.1-bugteam. the bug has been fixed in 5.1-rpl: please re-enable when that gets pushed to main

mysql-test/suite/rpl/t/rpl_temporary.test

@@ -56,6 +56,8 @@ drop table if exists t1,t2;
 create table t1(f int);
 create table t2(f int);
 insert into t1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10);
+# Auxiliary select (We want that all rows are in the table)
+SELECT COUNT(*) FROM t1;
 
 connection con1;
 create temporary table t3(f int);

mysql-test/t/innodb-semi-consistent.test

@@ -10,6 +10,7 @@ drop table if exists t1;
 connect (a,localhost,root,,);
 connect (b,localhost,root,,);
 connection a;
+set binlog_format=mixed;
 set session transaction isolation level read committed;
 create table t1(a int not null) engine=innodb DEFAULT CHARSET=latin1;
 insert into t1 values (1),(2),(3),(4),(5),(6),(7);
@@ -17,6 +18,7 @@ set autocommit=0;
 # this should lock the entire table
 select * from t1 where a=3 lock in share mode;
 connection b;
+set binlog_format=mixed;
 set session transaction isolation level read committed;
 set autocommit=0;
 -- error ER_LOCK_WAIT_TIMEOUT

sql/item.h

@@ -2126,7 +2126,7 @@ class Item_ref :public Item_ident
 protected:
   void set_properties();
 public:
-  enum Ref_Type { REF, DIRECT_REF, VIEW_REF, OUTER_REF };
+  enum Ref_Type { REF, DIRECT_REF, VIEW_REF, OUTER_REF, AGGREGATE_REF };
   Field *result_field;			 /* Save result here */
   Item **ref;
   Item_ref(Name_resolution_context *context_arg,