Commit a1bb700f authored by inaam's avatar inaam

branches/zip rb://30

This patch changes the innodb mutexes and rw_locks implementation.
On supported platforms it uses GCC builtin atomics. These changes
are based on the patch sent by Mark Callaghan of Google under BSD
license. More technical discussion can be found at rb://30

Approved by: Heikki
parent 19a3033a
......@@ -16,6 +16,38 @@ by crashing the database and doing a roll-forward.
Created 10/16/1994 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "btr0cur.h"
......@@ -365,7 +397,7 @@ btr_cur_search_to_nth_level(
#ifdef UNIV_SEARCH_PERF_STAT
info->n_searches++;
#endif
if (btr_search_latch.writer == RW_LOCK_NOT_LOCKED
if (rw_lock_get_writer(&btr_search_latch) == RW_LOCK_NOT_LOCKED
&& latch_mode <= BTR_MODIFY_LEAF && info->last_hash_succ
&& !estimate
#ifdef PAGE_CUR_LE_OR_EXTENDS
......
......@@ -6,6 +6,39 @@ The index tree adaptive search
Created 2/17/1996 Heikki Tuuri
*************************************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "btr0sea.h"
#ifdef UNIV_NONINL
#include "btr0sea.ic"
......@@ -820,8 +853,8 @@ btr_search_guess_on_hash(
}
}
ut_ad(btr_search_latch.writer != RW_LOCK_EX);
ut_ad(btr_search_latch.reader_count > 0);
ut_ad(rw_lock_get_writer(&btr_search_latch) != RW_LOCK_EX);
ut_ad(rw_lock_get_reader_count(&btr_search_latch) > 0);
rec = ha_search_and_get_data(btr_search_sys->hash_index, fold);
......
......@@ -19,6 +19,38 @@ The database buffer buf_pool
Created 11/5/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "buf0buf.h"
......@@ -2337,8 +2369,8 @@ buf_page_optimistic_get_func(
buf_block_get_page_no(block), NULL));
if (rw_latch == RW_S_LATCH) {
success = rw_lock_s_lock_func_nowait(&(block->lock),
file, line);
success = rw_lock_s_lock_nowait(&(block->lock),
file, line);
fix_type = MTR_MEMO_PAGE_S_FIX;
} else {
success = rw_lock_x_lock_func_nowait(&(block->lock),
......@@ -2449,8 +2481,8 @@ buf_page_get_known_nowait(
ut_ad(!ibuf_inside() || (mode == BUF_KEEP_OLD));
if (rw_latch == RW_S_LATCH) {
success = rw_lock_s_lock_func_nowait(&(block->lock),
file, line);
success = rw_lock_s_lock_nowait(&(block->lock),
file, line);
fix_type = MTR_MEMO_PAGE_S_FIX;
} else {
success = rw_lock_x_lock_func_nowait(&(block->lock),
......@@ -2527,7 +2559,7 @@ buf_page_try_get_func(
mutex_exit(&block->mutex);
fix_type = MTR_MEMO_PAGE_S_FIX;
success = rw_lock_s_lock_func_nowait(&block->lock, file, line);
success = rw_lock_s_lock_nowait(&block->lock, file, line);
if (!success) {
/* Let us try to get an X-latch. If the current thread
......
......@@ -13,6 +13,38 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
/* TODO list for the InnoDB handler in 5.0:
- Remove the flag trx->active_trans and look at trx->conc_state
- fix savepoint functions to use savepoint storage area
......@@ -462,6 +494,8 @@ static SHOW_VAR innodb_status_variables[]= {
(char*) &export_vars.innodb_dblwr_pages_written, SHOW_LONG},
{"dblwr_writes",
(char*) &export_vars.innodb_dblwr_writes, SHOW_LONG},
{"have_atomic_builtins",
(char*) &export_vars.innodb_have_atomic_builtins, SHOW_BOOL},
{"log_waits",
(char*) &export_vars.innodb_log_waits, SHOW_LONG},
{"log_write_requests",
......@@ -8034,7 +8068,8 @@ innodb_mutex_show_status(
stat_print_fn* stat_print)
{
char buf1[IO_SIZE], buf2[IO_SIZE];
mutex_t* mutex;
mutex_t* mutex;
rw_lock_t* lock;
#ifdef UNIV_DEBUG
ulint rw_lock_count= 0;
ulint rw_lock_count_spin_loop= 0;
......@@ -8105,6 +8140,29 @@ innodb_mutex_show_status(
mutex_exit(&mutex_list_mutex);
mutex_enter(&rw_lock_list_mutex);
lock = UT_LIST_GET_FIRST(rw_lock_list);
while (lock != NULL) {
if (lock->count_os_wait) {
buf1len= my_snprintf(buf1, sizeof(buf1), "%s:%lu",
lock->cfile_name, (ulong) lock->cline);
buf2len= my_snprintf(buf2, sizeof(buf2),
"os_waits=%lu", lock->count_os_wait);
if (stat_print(thd, innobase_hton_name,
hton_name_len, buf1, buf1len,
buf2, buf2len)) {
mutex_exit(&rw_lock_list_mutex);
DBUG_RETURN(1);
}
}
lock = UT_LIST_GET_NEXT(list, lock);
}
mutex_exit(&rw_lock_list_mutex);
#ifdef UNIV_DEBUG
buf2len= my_snprintf(buf2, sizeof(buf2),
"count=%lu, spin_waits=%lu, spin_rounds=%lu, "
......@@ -8140,7 +8198,6 @@ bool innobase_show_status(handlerton *hton, THD* thd,
}
}
/****************************************************************************
Handling the shared INNOBASE_SHARE structure that is needed to provide table
locking.
......
......@@ -5,6 +5,38 @@ The database buffer buf_pool
Created 11/5/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "buf0flu.h"
#include "buf0lru.h"
......@@ -851,7 +883,7 @@ buf_block_buf_fix_inc_func(
#ifdef UNIV_SYNC_DEBUG
ibool ret;
ret = rw_lock_s_lock_func_nowait(&(block->debug_latch), file, line);
ret = rw_lock_s_lock_nowait(&(block->debug_latch), file, line);
ut_a(ret);
#endif /* UNIV_SYNC_DEBUG */
ut_ad(mutex_own(&block->mutex));
......
......@@ -6,6 +6,38 @@ synchronization primitives.
Created 9/6/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#ifndef os0sync_h
#define os0sync_h
......@@ -261,6 +293,29 @@ os_fast_mutex_free(
/*===============*/
os_fast_mutex_t* fast_mutex); /* in: mutex to free */
#ifdef HAVE_GCC_ATOMIC_BUILTINS
/**************************************************************
Atomic compare-and-swap for InnoDB. Currently requires GCC atomic builtins. */
UNIV_INLINE
ibool
os_compare_and_swap(
/*================*/
/* out: true if swapped */
volatile lint* ptr, /* in: pointer to target */
lint oldVal, /* in: value to compare to */
lint newVal); /* in: value to swap in */
/**************************************************************
Atomic increment for InnoDB. Currently requires GCC atomic builtins. */
UNIV_INLINE
lint
os_atomic_increment(
/*================*/
/* out: resulting value */
volatile lint* ptr, /* in: pointer to target */
lint amount); /* in: amount of increment */
#endif /* HAVE_GCC_ATOMIC_BUILTINS */
#ifndef UNIV_NONINL
#include "os0sync.ic"
#endif
......
......@@ -5,6 +5,38 @@ The interface to the operating system synchronization primitives.
Created 9/6/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#ifdef __WIN__
#include <winbase.h>
......@@ -44,3 +76,38 @@ os_fast_mutex_trylock(
#endif
#endif
}
#ifdef HAVE_GCC_ATOMIC_BUILTINS
/**************************************************************
Atomic compare-and-swap for InnoDB. Currently requires GCC atomic builtins. */
UNIV_INLINE
ibool
os_compare_and_swap(
/*================*/
/* out: true if swapped */
volatile lint* ptr, /* in: pointer to target */
lint oldVal, /* in: value to compare to */
lint newVal) /* in: value to swap in */
{
if(__sync_bool_compare_and_swap(ptr, oldVal, newVal)) {
return(TRUE);
}
return(FALSE);
}
/**************************************************************
Atomic increment for InnoDB. Currently requires GCC atomic builtins. */
UNIV_INLINE
lint
os_atomic_increment(
/*================*/
/* out: resulting value */
volatile lint* ptr, /* in: pointer to target */
lint amount) /* in: amount of increment */
{
lint newVal = __sync_add_and_fetch(ptr, amount);
return newVal;
}
#endif /* HAVE_GCC_ATOMIC_BUILTINS */
......@@ -5,7 +5,38 @@ The server main program
Created 10/10/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#ifndef srv0srv_h
#define srv0srv_h
......@@ -528,6 +559,7 @@ struct export_var_struct{
ulint innodb_buffer_pool_read_ahead_rnd;
ulint innodb_dblwr_pages_written;
ulint innodb_dblwr_writes;
ibool innodb_have_atomic_builtins;
ulint innodb_log_waits;
ulint innodb_log_write_requests;
ulint innodb_log_writes;
......@@ -564,4 +596,3 @@ struct srv_sys_struct{
extern ulint srv_n_threads_active[];
#endif
......@@ -5,6 +5,38 @@ The read-write lock (for threads, not for database transactions)
Created 9/11/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#ifndef sync0rw_h
#define sync0rw_h
......@@ -24,6 +56,12 @@ smaller than 30 and the order of the numerical values like below! */
#define RW_X_LATCH 2
#define RW_NO_LATCH 3
/* We decrement lock_word by this amount for each x_lock. It is also the
start value for the lock_word, meaning that it limits the maximum number
of concurrent read locks before the rw_lock breaks. The current value of
0x00100000 allows 1,048,575 concurrent readers and 2047 recursive writers.*/
#define X_LOCK_DECR 0x00100000
typedef struct rw_lock_struct rw_lock_t;
#ifdef UNIV_SYNC_DEBUG
typedef struct rw_lock_debug_struct rw_lock_debug_t;
......@@ -47,14 +85,14 @@ extern ibool rw_lock_debug_waiters; /* This is set to TRUE, if
there may be waiters for the event */
#endif /* UNIV_SYNC_DEBUG */
extern ulint rw_s_system_call_count;
extern ulint rw_s_spin_wait_count;
extern ulint rw_s_exit_count;
extern ulint rw_s_os_wait_count;
extern ulint rw_x_system_call_count;
extern ulint rw_x_spin_wait_count;
extern ulint rw_x_os_wait_count;
extern ulint rw_x_exit_count;
extern ib_int64_t rw_s_spin_wait_count;
extern ib_int64_t rw_s_spin_round_count;
extern ib_int64_t rw_s_exit_count;
extern ib_int64_t rw_s_os_wait_count;
extern ib_int64_t rw_x_spin_wait_count;
extern ib_int64_t rw_x_spin_round_count;
extern ib_int64_t rw_x_os_wait_count;
extern ib_int64_t rw_x_exit_count;
/**********************************************************************
Creates, or rather, initializes an rw-lock object in a specified memory
......@@ -127,8 +165,22 @@ corresponding function. */
NOTE! The following macros should be used in rw s-locking, not the
corresponding function. */
#define rw_lock_s_lock_nowait(M) rw_lock_s_lock_func_nowait(\
(M), __FILE__, __LINE__)
#define rw_lock_s_lock_nowait(M, F, L) rw_lock_s_lock_low(\
(M), 0, (F), (L))
/**********************************************************************
Low-level function which tries to lock an rw-lock in s-mode. Performs no
spinning. */
UNIV_INLINE
ibool
rw_lock_s_lock_low(
/*===============*/
/* out: TRUE if success */
rw_lock_t* lock, /* in: pointer to rw-lock */
ulint pass __attribute__((unused)),
/* in: pass value; != 0, if the lock will be
passed to another thread to unlock */
const char* file_name, /* in: file name where lock requested */
ulint line); /* in: line where requested */
/**********************************************************************
NOTE! Use the corresponding macro, not directly this function, except if
you supply the file name and line number. Lock an rw-lock in shared mode
......@@ -146,18 +198,6 @@ rw_lock_s_lock_func(
const char* file_name,/* in: file name where lock requested */
ulint line); /* in: line where requested */
/**********************************************************************
NOTE! Use the corresponding macro, not directly this function, except if
you supply the file name and line number. Lock an rw-lock in shared mode
for the current thread if the lock can be acquired immediately. */
UNIV_INLINE
ibool
rw_lock_s_lock_func_nowait(
/*=======================*/
/* out: TRUE if success */
rw_lock_t* lock, /* in: pointer to rw-lock */
const char* file_name,/* in: file name where lock requested */
ulint line); /* in: line where requested */
/**********************************************************************
NOTE! Use the corresponding macro, not directly this function! Lock an
rw-lock in exclusive mode for the current thread if the lock can be
obtained immediately. */
......@@ -341,6 +381,41 @@ ulint
rw_lock_get_reader_count(
/*=====================*/
rw_lock_t* lock);
/**********************************************************************
Decrements lock_word the specified amount if it is greater than 0.
This is used by both s_lock and x_lock operations. */
UNIV_INLINE
ibool
rw_lock_lock_word_decr(
/*===================*/
/* out: TRUE if decr occurs */
rw_lock_t* lock, /* in: rw-lock */
ulint amount); /* in: amount to decrement */
/**********************************************************************
Increments lock_word the specified amount and returns new value. */
UNIV_INLINE
lint
rw_lock_lock_word_incr(
/*===================*/
/* out: TRUE if decr occurs */
rw_lock_t* lock,
ulint amount); /* in: rw-lock */
/**********************************************************************
This function sets the lock->writer_thread and lock->recursive fields.
For platforms where we are using atomic builtins instead of lock->mutex
it sets the lock->writer_thread field using atomics to ensure memory
ordering. Note that it is assumed that the caller of this function
effectively owns the lock i.e.: nobody else is allowed to modify
lock->writer_thread at this point in time.
The protocol is that lock->writer_thread MUST be updated BEFORE the
lock->recursive flag is set. */
UNIV_INLINE
void
rw_lock_set_writer_id_and_recursion_flag(
/*=====================================*/
rw_lock_t* lock, /* in/out: lock to work on */
ibool recursive); /* in: TRUE if recursion
allowed */
#ifdef UNIV_SYNC_DEBUG
/**********************************************************************
Checks if the thread has locked the rw-lock in the specified mode, with
......@@ -417,44 +492,37 @@ Do not use its fields directly! The structure used in the spin lock
implementation of a read-write lock. Several threads may have a shared lock
simultaneously in this lock, but only one writer may have an exclusive lock,
in which case no shared locks are allowed. To prevent starving of a writer
blocked by readers, a writer may queue for the lock by setting the writer
field. Then no new readers are allowed in. */
blocked by readers, a writer may queue for x-lock by decrementing lock_word:
no new readers will be let in while the thread waits for readers to exit. */
struct rw_lock_struct {
volatile lint lock_word;
/* Holds the state of the lock. */
volatile ulint waiters;/* 1: there are waiters */
volatile ibool recursive;/* Default value FALSE which means the lock
is non-recursive. The value is typically set
to TRUE making normal rw_locks recursive. In
case of asynchronous IO, when a non-zero
value of 'pass' is passed then we keep the
lock non-recursive.
This flag also tells us about the state of
writer_thread field. If this flag is set
then writer_thread MUST contain the thread
id of the current x-holder or wait-x thread.
This flag must be reset in x_unlock
functions before incrementing the lock_word */
volatile os_thread_id_t writer_thread;
/* Thread id of writer thread. Is only
guaranteed to have sane and non-stale
value iff recursive flag is set. */
os_event_t event; /* Used by sync0arr.c for thread queueing */
#ifdef __WIN__
os_event_t wait_ex_event; /* This windows specific event is
used by the thread which has set the
lock state to RW_LOCK_WAIT_EX. The
rw_lock design guarantees that this
thread will be the next one to proceed
once the current the event gets
signalled. See LEMMA 2 in sync0sync.c */
#endif
ulint reader_count; /* Number of readers who have locked this
lock in the shared mode */
ulint writer; /* This field is set to RW_LOCK_EX if there
is a writer owning the lock (in exclusive
mode), RW_LOCK_WAIT_EX if a writer is
queueing for the lock, and
RW_LOCK_NOT_LOCKED, otherwise. */
os_thread_id_t writer_thread;
/* Thread id of a possible writer thread */
ulint writer_count; /* Number of times the same thread has
recursively locked the lock in the exclusive
mode */
os_event_t wait_ex_event;
/* Event for next-writer to wait on. A thread
must decrement lock_word before waiting. */
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
mutex_t mutex; /* The mutex protecting rw_lock_struct */
ulint pass; /* Default value 0. This is set to some
value != 0 given by the caller of an x-lock
operation, if the x-lock is to be passed to
another thread to unlock (which happens in
asynchronous i/o). */
ulint waiters; /* This ulint is set to 1 if there are
waiters (readers or writers) in the global
wait array, waiting for this rw_lock.
Otherwise, == 0. */
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
UT_LIST_NODE_T(rw_lock_t) list;
/* All allocated rw locks are put into a
list */
......@@ -464,7 +532,9 @@ struct rw_lock_struct {
info list of the lock */
ulint level; /* Level in the global latching order. */
#endif /* UNIV_SYNC_DEBUG */
ulint count_os_wait; /* Count of os_waits. May not be accurate */
const char* cfile_name;/* File name where lock created */
/* last s-lock file/line is not guaranteed to be correct */
const char* last_s_file_name;/* File name where last s-locked */
const char* last_x_file_name;/* File name where last x-locked */
ibool writer_is_wait_ex;
......
......@@ -5,6 +5,38 @@ The read-write lock (for threads)
Created 9/11/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
/**********************************************************************
Lock an rw-lock in shared mode for the current thread. If the rw-lock is
......@@ -49,53 +81,88 @@ UNIV_INLINE
ulint
rw_lock_get_waiters(
/*================*/
rw_lock_t* lock)
/* out: 1 if waiters, 0 otherwise */
rw_lock_t* lock) /* in: rw-lock */
{
return(lock->waiters);
}
/************************************************************************
Sets lock->waiters to 1. It is not an error if lock->waiters is already
1. On platforms where ATOMIC builtins are used this function enforces a
memory barrier. */
UNIV_INLINE
void
rw_lock_set_waiters(
/*================*/
rw_lock_t* lock,
ulint flag)
rw_lock_set_waiter_flag(
/*====================*/
rw_lock_t* lock) /* in: rw-lock */
{
lock->waiters = flag;
#ifdef INNODB_RW_LOCKS_USE_ATOMICS
os_compare_and_swap((lint*)&(lock->waiters), 0, 1);
#else /* INNODB_RW_LOCKS_USE_ATOMICS */
lock->waiters = 1;
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
}
/************************************************************************
Resets lock->waiters to 0. It is not an error if lock->waiters is already
0. On platforms where ATOMIC builtins are used this function enforces a
memory barrier. */
UNIV_INLINE
ulint
rw_lock_get_writer(
/*===============*/
rw_lock_t* lock)
void
rw_lock_reset_waiter_flag(
/*======================*/
rw_lock_t* lock) /* in: rw-lock */
{
return(lock->writer);
#ifdef INNODB_RW_LOCKS_USE_ATOMICS
os_compare_and_swap((lint*)&(lock->waiters), 1, 0);
#else /* INNODB_RW_LOCKS_USE_ATOMICS */
lock->waiters = 0;
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
}
/**********************************************************************
Returns the write-status of the lock - this function made more sense
with the old rw_lock implementation. */
UNIV_INLINE
void
rw_lock_set_writer(
ulint
rw_lock_get_writer(
/*===============*/
rw_lock_t* lock,
ulint flag)
rw_lock_t* lock)
{
lock->writer = flag;
lint lock_word = lock->lock_word;
if(lock_word > 0) {
/* return NOT_LOCKED in s-lock state, like the writer
member of the old lock implementation. */
return(RW_LOCK_NOT_LOCKED);
} else if (((-lock_word) % X_LOCK_DECR) == 0) {
return(RW_LOCK_EX);
} else {
ut_ad(lock_word > -X_LOCK_DECR);
return(RW_LOCK_WAIT_EX);
}
}
/**********************************************************************
Returns number of readers. */
UNIV_INLINE
ulint
rw_lock_get_reader_count(
/*=====================*/
rw_lock_t* lock)
{
return(lock->reader_count);
}
UNIV_INLINE
void
rw_lock_set_reader_count(
/*=====================*/
rw_lock_t* lock,
ulint count)
{
lock->reader_count = count;
lint lock_word = lock->lock_word;
if(lock_word > 0) {
/* s-locked, no x-waiters */
return(X_LOCK_DECR - lock_word);
} else if (lock_word < 0 && lock_word > -X_LOCK_DECR) {
/* s-locked, with x-waiters */
return((ulint)(-lock_word));
}
return(0);
}
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
UNIV_INLINE
mutex_t*
rw_lock_get_mutex(
......@@ -104,6 +171,7 @@ rw_lock_get_mutex(
{
return(&(lock->mutex));
}
#endif
/**********************************************************************
Returns the value of writer_count for the lock. Does not reserve the lock
......@@ -115,7 +183,127 @@ rw_lock_get_x_lock_count(
/* out: value of writer_count */
rw_lock_t* lock) /* in: rw-lock */
{
return(lock->writer_count);
lint lock_copy = lock->lock_word;
/* If there is a reader, lock_word is not divisible by X_LOCK_DECR */
if(lock_copy > 0 || (-lock_copy) % X_LOCK_DECR != 0) {
return(0);
}
return(((-lock_copy) / X_LOCK_DECR) + 1);
}
/**********************************************************************
Two different implementations for decrementing the lock_word of a rw_lock:
one for systems supporting atomic operations, one for others. This does
does not support recusive x-locks: they should be handled by the caller and
need not be atomic since they are performed by the current lock holder.
Returns true if the decrement was made, false if not. */
UNIV_INLINE
ibool
rw_lock_lock_word_decr(
/*===================*/
/* out: TRUE if decr occurs */
rw_lock_t* lock, /* in: rw-lock */
ulint amount) /* in: amount of decrement */
{
#ifdef INNODB_RW_LOCKS_USE_ATOMICS
lint local_lock_word = lock->lock_word;
while (local_lock_word > 0) {
if(os_compare_and_swap(&(lock->lock_word),
local_lock_word,
local_lock_word - amount)) {
return(TRUE);
}
local_lock_word = lock->lock_word;
}
return(FALSE);
#else /* INNODB_RW_LOCKS_USE_ATOMICS */
ibool success = FALSE;
mutex_enter(&(lock->mutex));
if(lock->lock_word > 0) {
lock->lock_word -= amount;
success = TRUE;
}
mutex_exit(&(lock->mutex));
return(success);
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
}
/**********************************************************************
Two different implementations for incrementing the lock_word of a rw_lock:
one for systems supporting atomic operations, one for others.
Returns the value of lock_word after increment. */
UNIV_INLINE
lint
rw_lock_lock_word_incr(
/*===================*/
/* out: lock->lock_word after increment */
rw_lock_t* lock, /* in: rw-lock */
ulint amount) /* in: amount of increment */
{
#ifdef INNODB_RW_LOCKS_USE_ATOMICS
return(os_atomic_increment(&(lock->lock_word), amount));
#else /* INNODB_RW_LOCKS_USE_ATOMICS */
lint local_lock_word;
mutex_enter(&(lock->mutex));
lock->lock_word += amount;
local_lock_word = lock->lock_word;
mutex_exit(&(lock->mutex));
return(local_lock_word);
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
}
/**********************************************************************
This function sets the lock->writer_thread and lock->recursive fields.
For platforms where we are using atomic builtins instead of lock->mutex
it sets the lock->writer_thread field using atomics to ensure memory
ordering. Note that it is assumed that the caller of this function
effectively owns the lock i.e.: nobody else is allowed to modify
lock->writer_thread at this point in time.
The protocol is that lock->writer_thread MUST be updated BEFORE the
lock->recursive flag is set. */
UNIV_INLINE
void
rw_lock_set_writer_id_and_recursion_flag(
/*=====================================*/
rw_lock_t* lock, /* in/out: lock to work on */
ibool recursive) /* in: TRUE if recursion
allowed */
{
os_thread_id_t curr_thread = os_thread_get_curr_id();
ut_ad(lock);
#ifdef INNODB_RW_LOCKS_USE_ATOMICS
os_thread_id_t local_thread = lock->writer_thread;
ibool success = os_compare_and_swap((lint*)&(lock->writer_thread),
(lint)local_thread,
(lint)curr_thread);
ut_a(success);
lock->recursive = recursive;
#else /* INNODB_RW_LOCKS_USE_ATOMICS */
mutex_enter(&lock->mutex);
lock->writer_thread = curr_thread;
lock->recursive = recursive;
mutex_exit(&lock->mutex);
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
}
/**********************************************************************
......@@ -133,25 +321,21 @@ rw_lock_s_lock_low(
const char* file_name, /* in: file name where lock requested */
ulint line) /* in: line where requested */
{
ut_ad(mutex_own(rw_lock_get_mutex(lock)));
/* Check if the writer field is free */
if (UNIV_LIKELY(lock->writer == RW_LOCK_NOT_LOCKED)) {
/* Set the shared lock by incrementing the reader count */
lock->reader_count++;
/* TODO: study performance of UNIV_LIKELY branch prediction hints. */
if (!rw_lock_lock_word_decr(lock, 1)) {
/* Locking did not succeed */
return(FALSE);
}
#ifdef UNIV_SYNC_DEBUG
rw_lock_add_debug_info(lock, pass, RW_LOCK_SHARED, file_name,
line);
rw_lock_add_debug_info(lock, pass, RW_LOCK_SHARED, file_name, line);
#endif
lock->last_s_file_name = file_name;
lock->last_s_line = line;
return(TRUE); /* locking succeeded */
}
/* These debugging values are not set safely: they may be incorrect
or even refer to a line that is invalid for the file name. */
lock->last_s_file_name = file_name;
lock->last_s_line = line;
return(FALSE); /* locking did not succeed */
return(TRUE); /* locking succeeded */
}
/**********************************************************************
......@@ -166,11 +350,10 @@ rw_lock_s_lock_direct(
const char* file_name, /* in: file name where requested */
ulint line) /* in: line where lock requested */
{
ut_ad(lock->writer == RW_LOCK_NOT_LOCKED);
ut_ad(rw_lock_get_reader_count(lock) == 0);
ut_ad(lock->lock_word == X_LOCK_DECR);
/* Set the shared lock by incrementing the reader count */
lock->reader_count++;
/* Indicate there is a new reader by decrementing lock_word */
lock->lock_word--;
lock->last_s_file_name = file_name;
lock->last_s_line = line;
......@@ -193,13 +376,11 @@ rw_lock_x_lock_direct(
ulint line) /* in: line where lock requested */
{
ut_ad(rw_lock_validate(lock));
ut_ad(rw_lock_get_reader_count(lock) == 0);
ut_ad(rw_lock_get_writer(lock) == RW_LOCK_NOT_LOCKED);
ut_ad(lock->lock_word == X_LOCK_DECR);
rw_lock_set_writer(lock, RW_LOCK_EX);
lock->lock_word -= X_LOCK_DECR;
lock->writer_thread = os_thread_get_curr_id();
lock->writer_count++;
lock->pass = 0;
lock->recursive = TRUE;
lock->last_x_file_name = file_name;
lock->last_x_line = line;
......@@ -240,15 +421,12 @@ rw_lock_s_lock_func(
ut_ad(!rw_lock_own(lock, RW_LOCK_SHARED)); /* see NOTE above */
#endif /* UNIV_SYNC_DEBUG */
mutex_enter(rw_lock_get_mutex(lock));
if (UNIV_LIKELY(rw_lock_s_lock_low(lock, pass, file_name, line))) {
mutex_exit(rw_lock_get_mutex(lock));
/* TODO: study performance of UNIV_LIKELY branch prediction hints. */
if (rw_lock_s_lock_low(lock, pass, file_name, line)) {
return; /* Success */
} else {
/* Did not succeed, try spin wait */
mutex_exit(rw_lock_get_mutex(lock));
rw_lock_s_lock_spin(lock, pass, file_name, line);
......@@ -258,86 +436,60 @@ rw_lock_s_lock_func(
/**********************************************************************
NOTE! Use the corresponding macro, not directly this function! Lock an
rw-lock in shared mode for the current thread if the lock can be acquired
immediately. */
rw-lock in exclusive mode for the current thread if the lock can be
obtained immediately. */
UNIV_INLINE
ibool
rw_lock_s_lock_func_nowait(
rw_lock_x_lock_func_nowait(
/*=======================*/
/* out: TRUE if success */
rw_lock_t* lock, /* in: pointer to rw-lock */
const char* file_name,/* in: file name where lock requested */
ulint line) /* in: line where requested */
{
ibool success = FALSE;
mutex_enter(rw_lock_get_mutex(lock));
if (lock->writer == RW_LOCK_NOT_LOCKED) {
/* Set the shared lock by incrementing the reader count */
lock->reader_count++;
os_thread_id_t curr_thread = os_thread_get_curr_id();
#ifdef UNIV_SYNC_DEBUG
rw_lock_add_debug_info(lock, 0, RW_LOCK_SHARED, file_name,
line);
#endif
ibool success;
lock->last_s_file_name = file_name;
lock->last_s_line = line;
#ifdef INNODB_RW_LOCKS_USE_ATOMICS
success = os_compare_and_swap(&(lock->lock_word), X_LOCK_DECR, 0);
#else
success = FALSE;
mutex_enter(&(lock->mutex));
if (lock->lock_word == X_LOCK_DECR) {
lock->lock_word = 0;
success = TRUE;
}
mutex_exit(&(lock->mutex));
mutex_exit(rw_lock_get_mutex(lock));
return(success);
}
#endif
if (success) {
rw_lock_set_writer_id_and_recursion_flag(lock, TRUE);
/**********************************************************************
NOTE! Use the corresponding macro, not directly this function! Lock an
rw-lock in exclusive mode for the current thread if the lock can be
obtained immediately. */
UNIV_INLINE
ibool
rw_lock_x_lock_func_nowait(
/*=======================*/
/* out: TRUE if success */
rw_lock_t* lock, /* in: pointer to rw-lock */
const char* file_name,/* in: file name where lock requested */
ulint line) /* in: line where requested */
{
ibool success = FALSE;
os_thread_id_t curr_thread = os_thread_get_curr_id();
mutex_enter(rw_lock_get_mutex(lock));
} else if (lock->recursive &&
os_thread_eq(lock->writer_thread, curr_thread)) {
/* Relock: this lock_word modification is safe since no other
threads can modify (lock, unlock, or reserve) lock_word while
there is an exclusive writer and this is the writer thread. */
lock->lock_word -= X_LOCK_DECR;
if (UNIV_UNLIKELY(rw_lock_get_reader_count(lock) != 0)) {
} else if (UNIV_LIKELY(rw_lock_get_writer(lock)
== RW_LOCK_NOT_LOCKED)) {
rw_lock_set_writer(lock, RW_LOCK_EX);
lock->writer_thread = curr_thread;
lock->pass = 0;
relock:
lock->writer_count++;
ut_ad(((-lock->lock_word) % X_LOCK_DECR) == 0);
} else {
/* Failure */
return(FALSE);
}
#ifdef UNIV_SYNC_DEBUG
rw_lock_add_debug_info(lock, 0, RW_LOCK_EX, file_name, line);
rw_lock_add_debug_info(lock, 0, RW_LOCK_EX, file_name, line);
#endif
lock->last_x_file_name = file_name;
lock->last_x_line = line;
success = TRUE;
} else if (rw_lock_get_writer(lock) == RW_LOCK_EX
&& lock->pass == 0
&& os_thread_eq(lock->writer_thread, curr_thread)) {
goto relock;
}
mutex_exit(rw_lock_get_mutex(lock));
lock->last_x_file_name = file_name;
lock->last_x_line = line;
ut_ad(rw_lock_validate(lock));
return(success);
return(TRUE);
}
/**********************************************************************
......@@ -353,39 +505,21 @@ rw_lock_s_unlock_func(
#endif
)
{
mutex_t* mutex = &(lock->mutex);
ibool sg = FALSE;
/* Acquire the mutex protecting the rw-lock fields */
mutex_enter(mutex);
/* Reset the shared lock by decrementing the reader count */
ut_a(lock->reader_count > 0);
lock->reader_count--;
ut_ad((lock->lock_word % X_LOCK_DECR) != 0);
#ifdef UNIV_SYNC_DEBUG
rw_lock_remove_debug_info(lock, pass, RW_LOCK_SHARED);
#endif
/* If there may be waiters and this was the last s-lock,
signal the object */
if (UNIV_UNLIKELY(lock->waiters)
&& lock->reader_count == 0) {
sg = TRUE;
/* Increment lock_word to indicate 1 less reader */
if (rw_lock_lock_word_incr(lock, 1) == 0) {
rw_lock_set_waiters(lock, 0);
}
mutex_exit(mutex);
if (UNIV_UNLIKELY(sg)) {
#ifdef __WIN__
/* wait_ex waiter exists. It may not be asleep, but we signal
anyway. We do not wake other waiters, because they can't
exist without wait_ex waiter and wait_ex waiter goes first.*/
os_event_set(lock->wait_ex_event);
#endif
os_event_set(lock->event);
sync_array_object_signalled(sync_primary_wait_array);
}
ut_ad(rw_lock_validate(lock));
......@@ -404,16 +538,15 @@ rw_lock_s_unlock_direct(
/*====================*/
rw_lock_t* lock) /* in: rw-lock */
{
/* Reset the shared lock by decrementing the reader count */
ut_ad(lock->reader_count > 0);
lock->reader_count--;
ut_ad(lock->lock_word < X_LOCK_DECR);
#ifdef UNIV_SYNC_DEBUG
rw_lock_remove_debug_info(lock, 0, RW_LOCK_SHARED);
#endif
/* Decrease reader count by incrementing lock_word */
lock->lock_word++;
ut_ad(!lock->waiters);
ut_ad(rw_lock_validate(lock));
#ifdef UNIV_SYNC_PERF_STAT
......@@ -434,42 +567,32 @@ rw_lock_x_unlock_func(
#endif
)
{
ibool sg = FALSE;
/* Acquire the mutex protecting the rw-lock fields */
mutex_enter(&(lock->mutex));
/* Reset the exclusive lock if this thread no longer has an x-mode
lock */
ut_ad(lock->writer_count > 0);
lock->writer_count--;
if (lock->writer_count == 0) {
rw_lock_set_writer(lock, RW_LOCK_NOT_LOCKED);
ut_ad((lock->lock_word % X_LOCK_DECR) == 0);
/* lock->recursive flag also indicates if lock->writer_thread is
valid or stale. If we are the last of the recursive callers
then we must unset lock->recursive flag to indicate that the
lock->writer_thread is now stale.
Note that since we still hold the x-lock we can safely read the
lock_word. */
if (lock->lock_word == 0) {
/* Last caller in a possible recursive chain. */
lock->recursive = FALSE;
}
#ifdef UNIV_SYNC_DEBUG
rw_lock_remove_debug_info(lock, pass, RW_LOCK_EX);
#endif
/* If there may be waiters, signal the lock */
if (UNIV_UNLIKELY(lock->waiters)
&& lock->writer_count == 0) {
sg = TRUE;
rw_lock_set_waiters(lock, 0);
}
mutex_exit(&(lock->mutex));
if (UNIV_UNLIKELY(sg)) {
#ifdef __WIN__
os_event_set(lock->wait_ex_event);
#endif
os_event_set(lock->event);
sync_array_object_signalled(sync_primary_wait_array);
if (rw_lock_lock_word_incr(lock, X_LOCK_DECR) == X_LOCK_DECR) {
/* Lock is now free. May have to signal read/write waiters.
We do not need to signal wait_ex waiters, since they cannot
exist when there is a writer. */
if (lock->waiters) {
rw_lock_reset_waiter_flag(lock);
os_event_set(lock->event);
sync_array_object_signalled(sync_primary_wait_array);
}
}
ut_ad(rw_lock_validate(lock));
......@@ -481,7 +604,7 @@ rw_lock_x_unlock_func(
/**********************************************************************
Releases an exclusive mode lock when we know there are no waiters, and
none else will access the lock durint the time this function is executed. */
none else will access the lock during the time this function is executed. */
UNIV_INLINE
void
rw_lock_x_unlock_direct(
......@@ -491,18 +614,18 @@ rw_lock_x_unlock_direct(
/* Reset the exclusive lock if this thread no longer has an x-mode
lock */
ut_ad(lock->writer_count > 0);
lock->writer_count--;
if (lock->writer_count == 0) {
rw_lock_set_writer(lock, RW_LOCK_NOT_LOCKED);
}
ut_ad((lock->lock_word % X_LOCK_DECR) == 0);
#ifdef UNIV_SYNC_DEBUG
rw_lock_remove_debug_info(lock, 0, RW_LOCK_EX);
#endif
if (lock->lock_word == 0) {
lock->recursive = FALSE;
}
lock->lock_word += X_LOCK_DECR;
ut_ad(!lock->waiters);
ut_ad(rw_lock_validate(lock));
......
......@@ -5,6 +5,38 @@ Mutex, the basic synchronization primitive
Created 9/5/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#ifndef sync0sync_h
#define sync0sync_h
......@@ -237,7 +269,7 @@ mutex_n_reserved(void);
NOT to be used outside this module except in debugging! Gets the value
of the lock word. */
UNIV_INLINE
ulint
byte
mutex_get_lock_word(
/*================*/
const mutex_t* mutex); /* in: mutex */
......@@ -463,9 +495,11 @@ implementation of a mutual exclusion semaphore. */
struct mutex_struct {
os_event_t event; /* Used by sync0arr.c for the wait queue */
ulint lock_word; /* This ulint is the target of the atomic
test-and-set instruction in Win32 */
#if defined WIN32 && defined UNIV_CAN_USE_X86_ASSEMBLER
byte lock_word; /* This byte is the target of the atomic
test-and-set instruction in Win32 and
x86 32/64 with GCC 4.1.0 or later version */
#if defined(_WIN32) && defined(UNIV_CAN_USE_X86_ASSEMBLER)
#elif defined(HAVE_GCC_ATOMIC_BUILTINS)
#else
os_fast_mutex_t
os_fast_mutex; /* In other systems we use this OS mutex
......@@ -519,8 +553,7 @@ to 20 microseconds. */
/* The number of system calls made in this module. Intended for performance
monitoring. */
extern ulint mutex_system_call_count;
extern ulint mutex_exit_count;
extern ib_int64_t mutex_exit_count;
#ifdef UNIV_SYNC_DEBUG
/* Latching order checks start when this is set TRUE */
......
......@@ -5,16 +5,38 @@ Mutex, the basic synchronization primitive
Created 9/5/1995 Heikki Tuuri
*******************************************************/
#if defined(not_defined) && defined(__GNUC__) && defined(UNIV_INTEL_X86)
/* %z0: Use the size of operand %0 which in our case is *m to determine
instruction size, it should end up as xchgl. "1" in the input constraint,
says that "in" has to go in the same place as "out".*/
#define TAS(m, in, out) \
asm volatile ("xchg%z0 %2, %0" \
: "=g" (*(m)), "=r" (out) \
: "1" (in)) /* Note: "1" here refers to "=r" (out) */
#endif
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
/**********************************************************************
Sets the waiters field in a mutex. */
......@@ -59,7 +81,7 @@ mutex_signal_object(
Performs an atomic test-and-set instruction to the lock_word field of a
mutex. */
UNIV_INLINE
ulint
byte
mutex_test_and_set(
/*===============*/
/* out: the previous value of lock_word: 0 or
......@@ -67,18 +89,18 @@ mutex_test_and_set(
mutex_t* mutex) /* in: mutex */
{
#if defined(_WIN32) && defined(UNIV_CAN_USE_X86_ASSEMBLER)
ulint res;
ulint* lw; /* assembler code is used to ensure that
byte res;
byte* lw; /* assembler code is used to ensure that
lock_word is loaded from memory */
ut_ad(mutex);
ut_ad(sizeof(ulint) == 4);
ut_ad(sizeof(byte) == 1);
lw = &(mutex->lock_word);
__asm MOV ECX, lw
__asm MOV EDX, 1
__asm XCHG EDX, DWORD PTR [ECX]
__asm MOV res, EDX
__asm XCHG DL, BYTE PTR [ECX]
__asm MOV res, DL
/* The fence below would prevent this thread from
reading the data structure protected by the mutex
......@@ -98,12 +120,8 @@ mutex_test_and_set(
/* mutex_fence(); */
return(res);
#elif defined(not_defined) && defined(__GNUC__) && defined(UNIV_INTEL_X86)
ulint res;
TAS(&mutex->lock_word, 1, res);
return(res);
#elif defined(HAVE_GCC_ATOMIC_BUILTINS)
return __sync_lock_test_and_set(&(mutex->lock_word), 1);
#else
ibool ret;
......@@ -117,7 +135,7 @@ mutex_test_and_set(
mutex->lock_word = 1;
}
return(ret);
return((byte)ret);
#endif
}
......@@ -131,7 +149,7 @@ mutex_reset_lock_word(
mutex_t* mutex) /* in: mutex */
{
#if defined(_WIN32) && defined(UNIV_CAN_USE_X86_ASSEMBLER)
ulint* lw; /* assembler code is used to ensure that
byte* lw; /* assembler code is used to ensure that
lock_word is loaded from memory */
ut_ad(mutex);
......@@ -139,11 +157,12 @@ mutex_reset_lock_word(
__asm MOV EDX, 0
__asm MOV ECX, lw
__asm XCHG EDX, DWORD PTR [ECX]
#elif defined(not_defined) && defined(__GNUC__) && defined(UNIV_INTEL_X86)
ulint res;
TAS(&mutex->lock_word, 0, res);
__asm XCHG DL, BYTE PTR [ECX]
#elif defined(HAVE_GCC_ATOMIC_BUILTINS)
/* In theory __sync_lock_release should be used to release the lock.
Unfortunately, it does not work properly alone. The workaround is
that more conservative __sync_lock_test_and_set is used instead. */
__sync_lock_test_and_set(&(mutex->lock_word), 0);
#else
mutex->lock_word = 0;
......@@ -154,12 +173,12 @@ mutex_reset_lock_word(
/**********************************************************************
Gets the value of the lock word. */
UNIV_INLINE
ulint
byte
mutex_get_lock_word(
/*================*/
const mutex_t* mutex) /* in: mutex */
{
const volatile ulint* ptr; /* declared volatile to ensure that
const volatile byte* ptr; /* declared volatile to ensure that
lock_word is loaded from memory */
ut_ad(mutex);
......
......@@ -5,6 +5,38 @@ Version control for database, common definitions, and include files
Created 1/20/1994 Heikki Tuuri
****************************************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#ifndef univ_i
#define univ_i
......@@ -90,6 +122,13 @@ of the 32-bit x86 assembler in mutex operations. */
# define UNIV_CAN_USE_X86_ASSEMBLER
# endif
/* For InnoDB rw_locks to work with atomics we need the thread_id
to be no more than machine word wide. The following enables using
atomics for InnoDB rw_locks where these conditions are met. */
# if defined(HAVE_GCC_ATOMIC_BUILTINS) && defined(UNIV_LINUX)
# define INNODB_RW_LOCKS_USE_ATOMICS
# endif
/* We only try to do explicit inlining of functions with gcc and
Microsoft Visual C++ */
......
......@@ -5,6 +5,38 @@ Select
Created 12/19/1997 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "row0sel.h"
......@@ -1339,7 +1371,7 @@ row_sel(
rw_lock_s_lock(&btr_search_latch);
search_latch_locked = TRUE;
} else if (btr_search_latch.writer_is_wait_ex) {
} else if (rw_lock_get_writer(&btr_search_latch) == RW_LOCK_WAIT_EX) {
/* There is an x-latch request waiting: release the
s-latch for a moment; as an s-latch here is often
......@@ -3364,7 +3396,7 @@ row_search_for_mysql(
/* PHASE 0: Release a possible s-latch we are holding on the
adaptive hash index latch if there is someone waiting behind */
if (UNIV_UNLIKELY(btr_search_latch.writer != RW_LOCK_NOT_LOCKED)
if (UNIV_UNLIKELY(rw_lock_get_writer(&btr_search_latch) != RW_LOCK_NOT_LOCKED)
&& trx->has_search_latch) {
/* There is an x-latch request on the adaptive hash index:
......
......@@ -24,6 +24,38 @@ thread library. This might confuse NT though.
Created 10/8/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
/* Dummy comment */
#include "srv0srv.h"
......@@ -1822,6 +1854,11 @@ srv_export_innodb_status(void)
export_vars.innodb_buffer_pool_pages_misc = buf_pool->curr_size
- UT_LIST_GET_LEN(buf_pool->LRU)
- UT_LIST_GET_LEN(buf_pool->free);
#ifdef HAVE_GCC_ATOMIC_BUILTINS
export_vars.innodb_have_atomic_builtins = 1;
#else
export_vars.innodb_have_atomic_builtins = 0;
#endif
export_vars.innodb_page_size = UNIV_PAGE_SIZE;
export_vars.innodb_log_waits = srv_log_waits;
export_vars.innodb_os_log_written = srv_os_log_written;
......
......@@ -5,6 +5,38 @@ Starts the InnoDB database server
Created 2/16/1996 Heikki Tuuri
*************************************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "os0proc.h"
#include "sync0sync.h"
......@@ -1051,6 +1083,17 @@ innobase_start_or_create_for_mysql(void)
"InnoDB: The InnoDB memory heap is disabled\n");
}
#ifdef HAVE_GCC_ATOMIC_BUILTINS
#ifdef INNODB_RW_LOCKS_USE_ATOMICS
fprintf(stderr,
"InnoDB: Mutex and rw_lock use GCC atomic builtins.\n");
#else
fprintf(stderr,
"InnoDB: Mutex use GCC atomic builtins.\n");
#endif
#endif
/* Since InnoDB does not currently clean up all its internal data
structures in MySQL Embedded Server Library server_end(), we
print an error message if someone tries to start up InnoDB a
......
......@@ -5,6 +5,38 @@ The wait array used in synchronization primitives
Created 9/5/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "sync0arr.h"
#ifdef UNIV_NONINL
......@@ -295,25 +327,21 @@ sync_array_validate(
}
/***********************************************************************
Puts the cell event in reset state. */
Returns the event that the thread owning the cell waits for. */
static
ib_int64_t
sync_cell_event_reset(
/*==================*/
/* out: value of signal_count
at the time of reset. */
ulint type, /* in: lock type mutex/rw_lock */
void* object) /* in: the rw_lock/mutex object */
os_event_t
sync_cell_get_event(
/*================*/
sync_cell_t* cell) /* in: non-empty sync array cell */
{
ulint type = cell->request_type;
if (type == SYNC_MUTEX) {
return(os_event_reset(((mutex_t *) object)->event));
#ifdef __WIN__
return(((mutex_t *) cell->wait_object)->event);
} else if (type == RW_LOCK_WAIT_EX) {
return(os_event_reset(
((rw_lock_t *) object)->wait_ex_event));
#endif
} else {
return(os_event_reset(((rw_lock_t *) object)->event));
return(((rw_lock_t *) cell->wait_object)->wait_ex_event);
} else { /* RW_LOCK_SHARED and RW_LOCK_EX wait on the same event */
return(((rw_lock_t *) cell->wait_object)->event);
}
}
......@@ -332,6 +360,7 @@ sync_array_reserve_cell(
ulint* index) /* out: index of the reserved cell */
{
sync_cell_t* cell;
os_event_t event;
ulint i;
ut_a(object);
......@@ -370,8 +399,8 @@ sync_array_reserve_cell(
/* Make sure the event is reset and also store
the value of signal_count at which the event
was reset. */
cell->signal_count = sync_cell_event_reset(type,
object);
event = sync_cell_get_event(cell);
cell->signal_count = os_event_reset(event);
cell->reservation_time = time(NULL);
......@@ -411,19 +440,7 @@ sync_array_wait_event(
ut_a(!cell->waiting);
ut_ad(os_thread_get_curr_id() == cell->thread);
if (cell->request_type == SYNC_MUTEX) {
event = ((mutex_t*) cell->wait_object)->event;
#ifdef __WIN__
/* On windows if the thread about to wait is the one which
has set the state of the rw_lock to RW_LOCK_WAIT_EX, then
it waits on a special event i.e.: wait_ex_event. */
} else if (cell->request_type == RW_LOCK_WAIT_EX) {
event = ((rw_lock_t*) cell->wait_object)->wait_ex_event;
#endif
} else {
event = ((rw_lock_t*) cell->wait_object)->event;
}
event = sync_cell_get_event(cell);
cell->waiting = TRUE;
#ifdef UNIV_SYNC_DEBUG
......@@ -462,6 +479,7 @@ sync_array_cell_print(
mutex_t* mutex;
rw_lock_t* rwlock;
ulint type;
ulint writer;
type = cell->request_type;
......@@ -491,9 +509,7 @@ sync_array_cell_print(
(ulong) mutex->waiters);
} else if (type == RW_LOCK_EX
#ifdef __WIN__
|| type == RW_LOCK_WAIT_EX
#endif
|| type == RW_LOCK_SHARED) {
fputs(type == RW_LOCK_EX ? "X-lock on" : "S-lock on", file);
......@@ -504,22 +520,25 @@ sync_array_cell_print(
" RW-latch at %p created in file %s line %lu\n",
(void*) rwlock, rwlock->cfile_name,
(ulong) rwlock->cline);
if (rwlock->writer != RW_LOCK_NOT_LOCKED) {
writer = rw_lock_get_writer(rwlock);
if (writer != RW_LOCK_NOT_LOCKED) {
fprintf(file,
"a writer (thread id %lu) has"
" reserved it in mode %s",
(ulong) os_thread_pf(rwlock->writer_thread),
rwlock->writer == RW_LOCK_EX
writer == RW_LOCK_EX
? " exclusive\n"
: " wait exclusive\n");
}
fprintf(file,
"number of readers %lu, waiters flag %lu\n"
"number of readers %lu, waiters flag %lu, "
"lock_word: %lx\n"
"Last time read locked in file %s line %lu\n"
"Last time write locked in file %s line %lu\n",
(ulong) rwlock->reader_count,
(ulong) rw_lock_get_reader_count(rwlock),
(ulong) rwlock->waiters,
rwlock->lock_word,
rwlock->last_s_file_name,
(ulong) rwlock->last_s_line,
rwlock->last_x_file_name,
......@@ -778,28 +797,30 @@ sync_arr_cell_can_wake_up(
return(TRUE);
}
} else if (cell->request_type == RW_LOCK_EX
|| cell->request_type == RW_LOCK_WAIT_EX) {
} else if (cell->request_type == RW_LOCK_EX) {
lock = cell->wait_object;
if (rw_lock_get_reader_count(lock) == 0
&& rw_lock_get_writer(lock) == RW_LOCK_NOT_LOCKED) {
if (lock->lock_word > 0) {
/* Either unlocked or only read locked. */
return(TRUE);
}
if (rw_lock_get_reader_count(lock) == 0
&& rw_lock_get_writer(lock) == RW_LOCK_WAIT_EX
&& os_thread_eq(lock->writer_thread, cell->thread)) {
} else if (cell->request_type == RW_LOCK_WAIT_EX) {
lock = cell->wait_object;
/* lock_word == 0 means all readers have left */
if (lock->lock_word == 0) {
return(TRUE);
}
} else if (cell->request_type == RW_LOCK_SHARED) {
lock = cell->wait_object;
if (rw_lock_get_writer(lock) == RW_LOCK_NOT_LOCKED) {
/* lock_word > 0 means no writer or reserved writer */
if (lock->lock_word > 0) {
return(TRUE);
}
......@@ -844,11 +865,15 @@ sync_array_object_signalled(
/*========================*/
sync_array_t* arr) /* in: wait array */
{
#ifdef HAVE_GCC_ATOMIC_BUILTINS
os_atomic_increment(&(arr->sg_count),1);
#else
sync_array_enter(arr);
arr->sg_count++;
sync_array_exit(arr);
#endif
}
/**************************************************************************
......@@ -868,6 +893,7 @@ sync_arr_wake_threads_if_sema_free(void)
sync_cell_t* cell;
ulint count;
ulint i;
os_event_t event;
sync_array_enter(arr);
......@@ -877,36 +903,20 @@ sync_arr_wake_threads_if_sema_free(void)
while (count < arr->n_reserved) {
cell = sync_array_get_nth_cell(arr, i);
i++;
if (cell->wait_object != NULL) {
if (cell->wait_object == NULL) {
continue;
}
count++;
if (sync_arr_cell_can_wake_up(cell)) {
if (cell->request_type == SYNC_MUTEX) {
mutex_t* mutex;
event = sync_cell_get_event(cell);
mutex = cell->wait_object;
os_event_set(mutex->event);
#ifdef __WIN__
} else if (cell->request_type
== RW_LOCK_WAIT_EX) {
rw_lock_t* lock;
lock = cell->wait_object;
os_event_set(lock->wait_ex_event);
#endif
} else {
rw_lock_t* lock;
lock = cell->wait_object;
os_event_set(lock->event);
}
}
os_event_set(event);
}
i++;
}
sync_array_exit(arr);
......@@ -1026,4 +1036,3 @@ sync_array_print_info(
sync_array_exit(arr);
}
......@@ -5,6 +5,38 @@ The read-write lock (for thread synchronization)
Created 9/11/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "sync0rw.h"
#ifdef UNIV_NONINL
......@@ -15,35 +47,125 @@ Created 9/11/1995 Heikki Tuuri
#include "mem0mem.h"
#include "srv0srv.h"
/* number of system calls made during shared latching */
UNIV_INTERN ulint rw_s_system_call_count = 0;
/*
IMPLEMENTATION OF THE RW_LOCK
=============================
The status of a rw_lock is held in lock_word. The initial value of lock_word is
X_LOCK_DECR. lock_word is decremented by 1 for each s-lock and by X_LOCK_DECR
for each x-lock. This describes the lock state for each value of lock_word:
lock_word == X_LOCK_DECR: Unlocked.
0 < lock_word < X_LOCK_DECR: Read locked, no waiting writers.
(X_LOCK_DECR - lock_word) is the
number of readers that hold the lock.
lock_word == 0: Write locked
-X_LOCK_DECR < lock_word < 0: Read locked, with a waiting writer.
(-lock_word) is the number of readers
that hold the lock.
lock_word <= -X_LOCK_DECR: Recursively write locked. lock_word has been
decremented by X_LOCK_DECR once for each lock,
so the number of locks is:
((-lock_word) / X_LOCK_DECR) + 1
When lock_word <= -X_LOCK_DECR, we also know that lock_word % X_LOCK_DECR == 0:
other values of lock_word are invalid.
The lock_word is always read and updated atomically and consistently, so that
it always represents the state of the lock, and the state of the lock changes
with a single atomic operation. This lock_word holds all of the information
that a thread needs in order to determine if it is eligible to gain the lock
or if it must spin or sleep. The one exception to this is that writer_thread
must be verified before recursive write locks: to solve this scenario, we make
writer_thread readable by all threads, but only writeable by the x-lock holder.
The other members of the lock obey the following rules to remain consistent:
recursive: This and the writer_thread field together control the
behaviour of recursive x-locking.
lock->recursive must be FALSE in following states:
1) The writer_thread contains garbage i.e.: the
lock has just been initialized.
2) The lock is not x-held and there is no
x-waiter waiting on WAIT_EX event.
3) The lock is x-held or there is an x-waiter
waiting on WAIT_EX event but the 'pass' value
is non-zero.
lock->recursive is TRUE iff:
1) The lock is x-held or there is an x-waiter
waiting on WAIT_EX event and the 'pass' value
is zero.
This flag must be set after the writer_thread field
has been updated with a memory ordering barrier.
It is unset before the lock_word has been incremented.
writer_thread: Is used only in recursive x-locking. Can only be safely
read iff lock->recursive flag is TRUE.
This field is uninitialized at lock creation time and
is updated atomically when x-lock is acquired or when
move_ownership is called. A thread is only allowed to
set the value of this field to it's thread_id i.e.: a
thread cannot set writer_thread to some other thread's
id.
waiters: May be set to 1 anytime, but to avoid unnecessary wake-up
signals, it should only be set to 1 when there are threads
waiting on event. Must be 1 when a writer starts waiting to
ensure the current x-locking thread sends a wake-up signal
during unlock. May only be reset to 0 immediately before a
a wake-up signal is sent to event. On most platforms, a
memory barrier is required after waiters is set, and before
verifying lock_word is still held, to ensure some unlocker
really does see the flags new value.
event: Threads wait on event for read or writer lock when another
thread has an x-lock or an x-lock reservation (wait_ex). A
thread may only wait on event after performing the following
actions in order:
(1) Record the counter value of event (with os_event_reset).
(2) Set waiters to 1.
(3) Verify lock_word <= 0.
(1) must come before (2) to ensure signal is not missed.
(2) must come before (3) to ensure a signal is sent.
These restrictions force the above ordering.
Immediately before sending the wake-up signal, we should:
(1) Verify lock_word == X_LOCK_DECR (unlocked)
(2) Reset waiters to 0.
wait_ex_event: A thread may only wait on the wait_ex_event after it has
performed the following actions in order:
(1) Decrement lock_word by X_LOCK_DECR.
(2) Record counter value of wait_ex_event (os_event_reset,
called from sync_array_reserve_cell).
(3) Verify that lock_word < 0.
(1) must come first to ensures no other threads become reader
or next writer, and notifies unlocker that signal must be sent.
(2) must come before (3) to ensure the signal is not missed.
These restrictions force the above ordering.
Immediately before sending the wake-up signal, we should:
Verify lock_word == 0 (waiting thread holds x_lock)
*/
/* number of spin waits on rw-latches,
resulted during shared (read) locks */
UNIV_INTERN ulint rw_s_spin_wait_count = 0;
UNIV_INTERN ib_int64_t rw_s_spin_wait_count = 0;
UNIV_INTERN ib_int64_t rw_s_spin_round_count = 0;
/* number of OS waits on rw-latches,
resulted during shared (read) locks */
UNIV_INTERN ulint rw_s_os_wait_count = 0;
UNIV_INTERN ib_int64_t rw_s_os_wait_count = 0;
/* number of unlocks (that unlock shared locks),
set only when UNIV_SYNC_PERF_STAT is defined */
UNIV_INTERN ulint rw_s_exit_count = 0;
/* number of system calls made during exclusive latching */
UNIV_INTERN ulint rw_x_system_call_count = 0;
UNIV_INTERN ib_int64_t rw_s_exit_count = 0;
/* number of spin waits on rw-latches,
resulted during exclusive (write) locks */
UNIV_INTERN ulint rw_x_spin_wait_count = 0;
UNIV_INTERN ib_int64_t rw_x_spin_wait_count = 0;
UNIV_INTERN ib_int64_t rw_x_spin_round_count = 0;
/* number of OS waits on rw-latches,
resulted during exclusive (write) locks */
UNIV_INTERN ulint rw_x_os_wait_count = 0;
UNIV_INTERN ib_int64_t rw_x_os_wait_count = 0;
/* number of unlocks (that unlock exclusive locks),
set only when UNIV_SYNC_PERF_STAT is defined */
UNIV_INTERN ulint rw_x_exit_count = 0;
UNIV_INTERN ib_int64_t rw_x_exit_count = 0;
/* The global list of rw-locks */
UNIV_INTERN rw_lock_list_t rw_lock_list;
......@@ -114,11 +236,12 @@ rw_lock_create_func(
const char* cmutex_name, /* in: mutex name */
#endif /* UNIV_DEBUG */
const char* cfile_name, /* in: file name where created */
ulint cline) /* in: file line where created */
ulint cline) /* in: file line where created */
{
/* If this is the very first time a synchronization object is
created, then the following call initializes the sync system. */
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
mutex_create(rw_lock_get_mutex(lock), SYNC_NO_ORDER_CHECK);
lock->mutex.cfile_name = cfile_name;
......@@ -129,12 +252,19 @@ rw_lock_create_func(
lock->mutex.mutex_type = 1;
#endif /* UNIV_DEBUG && !UNIV_HOTBACKUP */
rw_lock_set_waiters(lock, 0);
rw_lock_set_writer(lock, RW_LOCK_NOT_LOCKED);
lock->writer_count = 0;
rw_lock_set_reader_count(lock, 0);
#else /* INNODB_RW_LOCKS_USE_ATOMICS */
#ifdef UNIV_DEBUG
UT_NOT_USED(cmutex_name);
#endif
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
lock->lock_word = X_LOCK_DECR;
lock->waiters = 0;
lock->writer_is_wait_ex = FALSE;
/* We set this value to signify that lock->writer_thread
contains garbage at initialization and cannot be used for
recursive x-locking. */
lock->recursive = FALSE;
#ifdef UNIV_SYNC_DEBUG
UT_LIST_INIT(lock->debug_list);
......@@ -147,15 +277,13 @@ rw_lock_create_func(
lock->cfile_name = cfile_name;
lock->cline = (unsigned int) cline;
lock->count_os_wait = 0;
lock->last_s_file_name = "not yet reserved";
lock->last_x_file_name = "not yet reserved";
lock->last_s_line = 0;
lock->last_x_line = 0;
lock->event = os_event_create(NULL);
#ifdef __WIN__
lock->wait_ex_event = os_event_create(NULL);
#endif
mutex_enter(&rw_lock_list_mutex);
......@@ -180,20 +308,18 @@ rw_lock_free(
rw_lock_t* lock) /* in: rw-lock */
{
ut_ad(rw_lock_validate(lock));
ut_a(rw_lock_get_writer(lock) == RW_LOCK_NOT_LOCKED);
ut_a(rw_lock_get_waiters(lock) == 0);
ut_a(rw_lock_get_reader_count(lock) == 0);
ut_a(lock->lock_word == X_LOCK_DECR);
lock->magic_n = 0;
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
mutex_free(rw_lock_get_mutex(lock));
#endif /* INNODB_RW_LOCKS_USE_ATOMICS */
mutex_enter(&rw_lock_list_mutex);
os_event_free(lock->event);
#ifdef __WIN__
os_event_free(lock->wait_ex_event);
#endif
if (UT_LIST_GET_PREV(list, lock)) {
ut_a(UT_LIST_GET_PREV(list, lock)->magic_n == RW_LOCK_MAGIC_N);
......@@ -219,19 +345,12 @@ rw_lock_validate(
{
ut_a(lock);
mutex_enter(rw_lock_get_mutex(lock));
ulint waiters = rw_lock_get_waiters(lock);
lint lock_word = lock->lock_word;
ut_a(lock->magic_n == RW_LOCK_MAGIC_N);
ut_a((rw_lock_get_reader_count(lock) == 0)
|| (rw_lock_get_writer(lock) != RW_LOCK_EX));
ut_a((rw_lock_get_writer(lock) == RW_LOCK_EX)
|| (rw_lock_get_writer(lock) == RW_LOCK_WAIT_EX)
|| (rw_lock_get_writer(lock) == RW_LOCK_NOT_LOCKED));
ut_a((rw_lock_get_waiters(lock) == 0)
|| (rw_lock_get_waiters(lock) == 1));
ut_a((lock->writer != RW_LOCK_EX) || (lock->writer_count > 0));
mutex_exit(rw_lock_get_mutex(lock));
ut_a(waiters == 0 || waiters == 1);
ut_a(lock_word > -X_LOCK_DECR ||(-lock_word) % X_LOCK_DECR == 0);
return(TRUE);
}
......@@ -253,18 +372,15 @@ rw_lock_s_lock_spin(
ulint line) /* in: line where requested */
{
ulint index; /* index of the reserved wait cell */
ulint i; /* spin round count */
ulint i = 0; /* spin round count */
ut_ad(rw_lock_validate(lock));
rw_s_spin_wait_count++; /* Count calls to this function */
lock_loop:
rw_s_spin_wait_count++;
/* Spin waiting for the writer field to become free */
i = 0;
while (rw_lock_get_writer(lock) != RW_LOCK_NOT_LOCKED
&& i < SYNC_SPIN_ROUNDS) {
while (i < SYNC_SPIN_ROUNDS && lock->lock_word <= 0) {
if (srv_spin_wait_delay) {
ut_delay(ut_rnd_interval(0, srv_spin_wait_delay));
}
......@@ -285,28 +401,32 @@ rw_lock_s_lock_spin(
lock->cfile_name, (ulong) lock->cline, (ulong) i);
}
mutex_enter(rw_lock_get_mutex(lock));
/* We try once again to obtain the lock */
if (TRUE == rw_lock_s_lock_low(lock, pass, file_name, line)) {
mutex_exit(rw_lock_get_mutex(lock));
rw_s_spin_round_count += i;
return; /* Success */
} else {
/* If we get here, locking did not succeed, we may
suspend the thread to wait in the wait array */
rw_s_system_call_count++;
if (i < SYNC_SPIN_ROUNDS) {
goto lock_loop;
}
rw_s_spin_round_count += i;
sync_array_reserve_cell(sync_primary_wait_array,
lock, RW_LOCK_SHARED,
file_name, line,
&index);
rw_lock_set_waiters(lock, 1);
/* Set waiters before checking lock_word to ensure wake-up
signal is sent. This may lead to some unnecessary signals. */
rw_lock_set_waiter_flag(lock);
mutex_exit(rw_lock_get_mutex(lock));
if (TRUE == rw_lock_s_lock_low(lock, pass, file_name, line)) {
sync_array_free_cell(sync_primary_wait_array, index);
return; /* Success */
}
if (srv_print_latch_waits) {
fprintf(stderr,
......@@ -317,11 +437,13 @@ rw_lock_s_lock_spin(
(ulong) lock->cline);
}
rw_s_system_call_count++;
/* these stats may not be accurate */
lock->count_os_wait++;
rw_s_os_wait_count++;
sync_array_wait_event(sync_primary_wait_array, index);
i = 0;
goto lock_loop;
}
}
......@@ -343,113 +465,130 @@ rw_lock_x_lock_move_ownership(
{
ut_ad(rw_lock_is_locked(lock, RW_LOCK_EX));
mutex_enter(&(lock->mutex));
lock->writer_thread = os_thread_get_curr_id();
lock->pass = 0;
mutex_exit(&(lock->mutex));
rw_lock_set_writer_id_and_recursion_flag(lock, TRUE);
}
/**********************************************************************
Low-level function for acquiring an exclusive lock. */
Function for the next writer to call. Waits for readers to exit.
The caller must have already decremented lock_word by X_LOCK_DECR.*/
UNIV_INLINE
ulint
rw_lock_x_lock_low(
/*===============*/
/* out: RW_LOCK_NOT_LOCKED if did
not succeed, RW_LOCK_EX if success,
RW_LOCK_WAIT_EX, if got wait reservation */
void
rw_lock_x_lock_wait(
/*================*/
rw_lock_t* lock, /* in: pointer to rw-lock */
#ifdef UNIV_SYNC_DEBUG
ulint pass, /* in: pass value; != 0, if the lock will
be passed to another thread to unlock */
#endif
const char* file_name,/* in: file name where lock requested */
ulint line) /* in: line where requested */
{
ut_ad(mutex_own(rw_lock_get_mutex(lock)));
ulint index;
ulint i = 0;
if (rw_lock_get_writer(lock) == RW_LOCK_NOT_LOCKED) {
ut_ad(lock->lock_word <= 0);
if (rw_lock_get_reader_count(lock) == 0) {
rw_lock_set_writer(lock, RW_LOCK_EX);
lock->writer_thread = os_thread_get_curr_id();
lock->writer_count++;
lock->pass = pass;
while (lock->lock_word < 0) {
if (srv_spin_wait_delay) {
ut_delay(ut_rnd_interval(0, srv_spin_wait_delay));
}
if(i < SYNC_SPIN_ROUNDS) {
i++;
continue;
}
#ifdef UNIV_SYNC_DEBUG
rw_lock_add_debug_info(lock, pass, RW_LOCK_EX,
file_name, line);
#endif
lock->last_x_file_name = file_name;
lock->last_x_line = (unsigned int) line;
/* If there is still a reader, then go to sleep.*/
rw_x_spin_round_count += i;
i = 0;
sync_array_reserve_cell(sync_primary_wait_array,
lock,
RW_LOCK_WAIT_EX,
file_name, line,
&index);
/* Check lock_word to ensure wake-up isn't missed.*/
if(lock->lock_word < 0) {
/* Locking succeeded, we may return */
return(RW_LOCK_EX);
} else {
/* There are readers, we have to wait */
rw_lock_set_writer(lock, RW_LOCK_WAIT_EX);
lock->writer_thread = os_thread_get_curr_id();
lock->pass = pass;
lock->writer_is_wait_ex = TRUE;
/* these stats may not be accurate */
lock->count_os_wait++;
rw_x_os_wait_count++;
/* Add debug info as it is needed to detect possible
deadlock. We must add info for WAIT_EX thread for
deadlock detection to work properly. */
#ifdef UNIV_SYNC_DEBUG
rw_lock_add_debug_info(lock, pass, RW_LOCK_WAIT_EX,
file_name, line);
#endif
return(RW_LOCK_WAIT_EX);
}
} else if ((rw_lock_get_writer(lock) == RW_LOCK_WAIT_EX)
&& os_thread_eq(lock->writer_thread,
os_thread_get_curr_id())) {
if (rw_lock_get_reader_count(lock) == 0) {
rw_lock_set_writer(lock, RW_LOCK_EX);
lock->writer_count++;
lock->pass = pass;
lock->writer_is_wait_ex = FALSE;
sync_array_wait_event(sync_primary_wait_array,
index);
#ifdef UNIV_SYNC_DEBUG
rw_lock_remove_debug_info(lock, pass, RW_LOCK_WAIT_EX);
rw_lock_add_debug_info(lock, pass, RW_LOCK_EX,
file_name, line);
rw_lock_remove_debug_info(lock, pass,
RW_LOCK_WAIT_EX);
#endif
lock->last_x_file_name = file_name;
lock->last_x_line = (unsigned int) line;
/* Locking succeeded, we may return */
return(RW_LOCK_EX);
/* It is possible to wake when lock_word < 0.
We must pass the while-loop check to proceed.*/
} else {
sync_array_free_cell(sync_primary_wait_array,
index);
}
}
rw_x_spin_round_count += i;
}
/**********************************************************************
Low-level function for acquiring an exclusive lock. */
UNIV_INLINE
ibool
rw_lock_x_lock_low(
/*===============*/
/* out: RW_LOCK_NOT_LOCKED if did
not succeed, RW_LOCK_EX if success. */
rw_lock_t* lock, /* in: pointer to rw-lock */
ulint pass, /* in: pass value; != 0, if the lock will
be passed to another thread to unlock */
const char* file_name,/* in: file name where lock requested */
ulint line) /* in: line where requested */
{
os_thread_id_t curr_thread = os_thread_get_curr_id();
return(RW_LOCK_WAIT_EX);
if (rw_lock_lock_word_decr(lock, X_LOCK_DECR)) {
} else if ((rw_lock_get_writer(lock) == RW_LOCK_EX)
&& os_thread_eq(lock->writer_thread,
os_thread_get_curr_id())
&& (lock->pass == 0)
&& (pass == 0)) {
/* lock->recursive also tells us if the writer_thread
field is stale or active. As we are going to write
our own thread id in that field it must be that the
current writer_thread value is not active. */
ut_a(!lock->recursive);
lock->writer_count++;
/* Decrement occurred: we are writer or next-writer. */
rw_lock_set_writer_id_and_recursion_flag(lock,
pass ? FALSE : TRUE);
rw_lock_x_lock_wait(lock,
#ifdef UNIV_SYNC_DEBUG
rw_lock_add_debug_info(lock, pass, RW_LOCK_EX, file_name,
line);
pass,
#endif
file_name, line);
lock->last_x_file_name = file_name;
lock->last_x_line = (unsigned int) line;
/* Locking succeeded, we may return */
return(RW_LOCK_EX);
} else {
/* Decrement failed: relock or failed lock */
if (!pass && lock->recursive &&
os_thread_eq(lock->writer_thread, curr_thread)) {
/* Relock */
lock->lock_word -= X_LOCK_DECR;
} else {
/* Another thread locked before us */
return(FALSE);
}
}
#ifdef UNIV_SYNC_DEBUG
rw_lock_add_debug_info(lock, pass, RW_LOCK_EX,
file_name, line);
#endif
lock->last_x_file_name = file_name;
lock->last_x_line = (unsigned int) line;
/* Locking did not succeed */
return(RW_LOCK_NOT_LOCKED);
return(TRUE);
}
/**********************************************************************
......@@ -472,47 +611,30 @@ rw_lock_x_lock_func(
ulint line) /* in: line where requested */
{
ulint index; /* index of the reserved wait cell */
ulint state; /* lock state acquired */
ulint i; /* spin round count */
ibool spinning = FALSE;
ut_ad(rw_lock_validate(lock));
lock_loop:
/* Acquire the mutex protecting the rw-lock fields */
mutex_enter_fast(&(lock->mutex));
state = rw_lock_x_lock_low(lock, pass, file_name, line);
i = 0;
mutex_exit(&(lock->mutex));
lock_loop:
if (state == RW_LOCK_EX) {
if (rw_lock_x_lock_low(lock, pass, file_name, line)) {
rw_x_spin_round_count += i;
return; /* Locking succeeded */
} else if (state == RW_LOCK_NOT_LOCKED) {
/* Spin waiting for the writer field to become free */
i = 0;
while (rw_lock_get_writer(lock) != RW_LOCK_NOT_LOCKED
&& i < SYNC_SPIN_ROUNDS) {
if (srv_spin_wait_delay) {
ut_delay(ut_rnd_interval(0,
srv_spin_wait_delay));
}
} else {
i++;
}
if (i == SYNC_SPIN_ROUNDS) {
os_thread_yield();
if (!spinning) {
spinning = TRUE;
rw_x_spin_wait_count++;
}
} else if (state == RW_LOCK_WAIT_EX) {
/* Spin waiting for the reader count field to become zero */
i = 0;
while (rw_lock_get_reader_count(lock) != 0
&& i < SYNC_SPIN_ROUNDS) {
/* Spin waiting for the lock_word to become free */
while (i < SYNC_SPIN_ROUNDS
&& lock->lock_word <= 0) {
if (srv_spin_wait_delay) {
ut_delay(ut_rnd_interval(0,
srv_spin_wait_delay));
......@@ -522,12 +644,13 @@ rw_lock_x_lock_func(
}
if (i == SYNC_SPIN_ROUNDS) {
os_thread_yield();
} else {
goto lock_loop;
}
} else {
i = 0; /* Eliminate a compiler warning */
ut_error;
}
rw_x_spin_round_count += i;
if (srv_print_latch_waits) {
fprintf(stderr,
"Thread %lu spin wait rw-x-lock at %p"
......@@ -536,39 +659,20 @@ rw_lock_x_lock_func(
lock->cfile_name, (ulong) lock->cline, (ulong) i);
}
rw_x_spin_wait_count++;
/* We try once again to obtain the lock. Acquire the mutex protecting
the rw-lock fields */
mutex_enter(rw_lock_get_mutex(lock));
state = rw_lock_x_lock_low(lock, pass, file_name, line);
if (state == RW_LOCK_EX) {
mutex_exit(rw_lock_get_mutex(lock));
return; /* Locking succeeded */
}
rw_x_system_call_count++;
sync_array_reserve_cell(sync_primary_wait_array,
lock,
#ifdef __WIN__
/* On windows RW_LOCK_WAIT_EX signifies
that this thread should wait on the
special wait_ex_event. */
(state == RW_LOCK_WAIT_EX)
? RW_LOCK_WAIT_EX :
#endif
RW_LOCK_EX,
file_name, line,
&index);
rw_lock_set_waiters(lock, 1);
/* Waiters must be set before checking lock_word, to ensure signal
is sent. This could lead to a few unnecessary wake-up signals. */
rw_lock_set_waiter_flag(lock);
mutex_exit(rw_lock_get_mutex(lock));
if (rw_lock_x_lock_low(lock, pass, file_name, line)) {
sync_array_free_cell(sync_primary_wait_array, index);
return; /* Locking succeeded */
}
if (srv_print_latch_waits) {
fprintf(stderr,
......@@ -578,11 +682,13 @@ rw_lock_x_lock_func(
lock->cfile_name, (ulong) lock->cline);
}
rw_x_system_call_count++;
/* these stats may not be accurate */
lock->count_os_wait++;
rw_x_os_wait_count++;
sync_array_wait_event(sync_primary_wait_array, index);
i = 0;
goto lock_loop;
}
......@@ -730,7 +836,7 @@ rw_lock_own(
ut_ad(lock);
ut_ad(rw_lock_validate(lock));
mutex_enter(&(lock->mutex));
rw_lock_debug_mutex_enter();
info = UT_LIST_GET_FIRST(lock->debug_list);
......@@ -740,7 +846,7 @@ rw_lock_own(
&& (info->pass == 0)
&& (info->lock_type == lock_type)) {
mutex_exit(&(lock->mutex));
rw_lock_debug_mutex_exit();
/* Found! */
return(TRUE);
......@@ -748,7 +854,7 @@ rw_lock_own(
info = UT_LIST_GET_NEXT(list, info);
}
mutex_exit(&(lock->mutex));
rw_lock_debug_mutex_exit();
return(FALSE);
}
......@@ -770,22 +876,18 @@ rw_lock_is_locked(
ut_ad(lock);
ut_ad(rw_lock_validate(lock));
mutex_enter(&(lock->mutex));
if (lock_type == RW_LOCK_SHARED) {
if (lock->reader_count > 0) {
if (rw_lock_get_reader_count(lock) > 0) {
ret = TRUE;
}
} else if (lock_type == RW_LOCK_EX) {
if (lock->writer == RW_LOCK_EX) {
if (rw_lock_get_writer(lock) == RW_LOCK_EX) {
ret = TRUE;
}
} else {
ut_error;
}
mutex_exit(&(lock->mutex));
return(ret);
}
......@@ -814,11 +916,10 @@ rw_lock_list_print_info(
count++;
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
mutex_enter(&(lock->mutex));
if ((rw_lock_get_writer(lock) != RW_LOCK_NOT_LOCKED)
|| (rw_lock_get_reader_count(lock) != 0)
|| (rw_lock_get_waiters(lock) != 0)) {
#endif
if (lock->lock_word != X_LOCK_DECR) {
fprintf(file, "RW-LOCK: %p ", (void*) lock);
......@@ -834,8 +935,10 @@ rw_lock_list_print_info(
info = UT_LIST_GET_NEXT(list, info);
}
}
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
mutex_exit(&(lock->mutex));
#endif
lock = UT_LIST_GET_NEXT(list, lock);
}
......@@ -858,9 +961,10 @@ rw_lock_print(
"RW-LATCH INFO\n"
"RW-LATCH: %p ", (void*) lock);
if ((rw_lock_get_writer(lock) != RW_LOCK_NOT_LOCKED)
|| (rw_lock_get_reader_count(lock) != 0)
|| (rw_lock_get_waiters(lock) != 0)) {
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
mutex_enter(&(lock->mutex));
#endif
if (lock->lock_word != X_LOCK_DECR) {
if (rw_lock_get_waiters(lock)) {
fputs(" Waiters for the lock exist\n", stderr);
......@@ -874,6 +978,9 @@ rw_lock_print(
info = UT_LIST_GET_NEXT(list, info);
}
}
#ifndef INNODB_RW_LOCKS_USE_ATOMICS
mutex_exit(&(lock->mutex));
#endif
}
/*************************************************************************
......@@ -922,14 +1029,11 @@ rw_lock_n_locked(void)
lock = UT_LIST_GET_FIRST(rw_lock_list);
while (lock != NULL) {
mutex_enter(rw_lock_get_mutex(lock));
if ((rw_lock_get_writer(lock) != RW_LOCK_NOT_LOCKED)
|| (rw_lock_get_reader_count(lock) != 0)) {
if (lock->lock_word != X_LOCK_DECR) {
count++;
}
mutex_exit(rw_lock_get_mutex(lock));
lock = UT_LIST_GET_NEXT(list, lock);
}
......
......@@ -5,6 +5,38 @@ Mutex, the basic synchronization primitive
Created 9/5/1995 Heikki Tuuri
*******************************************************/
/***********************************************************************
# Copyright (c) 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials
# provided with the distribution.
# * Neither the name of the Google Inc. nor the names of its
# contributors may be used to endorse or promote products
# derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Note, the BSD license applies to the new code. The old code is GPL.
***********************************************************************/
#include "sync0sync.h"
#ifdef UNIV_NONINL
......@@ -138,18 +170,13 @@ Therefore, this thread is guaranteed to catch the os_set_event()
signalled unconditionally at the release of the lock.
Q.E.D. */
/* The number of system calls made in this module. Intended for performance
monitoring. */
UNIV_INTERN ulint mutex_system_call_count = 0;
/* Number of spin waits on mutexes: for performance monitoring */
/* round=one iteration of a spin loop */
UNIV_INTERN ulint mutex_spin_round_count = 0;
UNIV_INTERN ulint mutex_spin_wait_count = 0;
UNIV_INTERN ulint mutex_os_wait_count = 0;
UNIV_INTERN ulint mutex_exit_count = 0;
UNIV_INTERN ib_int64_t mutex_spin_round_count = 0;
UNIV_INTERN ib_int64_t mutex_spin_wait_count = 0;
UNIV_INTERN ib_int64_t mutex_os_wait_count = 0;
UNIV_INTERN ib_int64_t mutex_exit_count = 0;
/* The global array of wait cells for implementation of the database's own
mutexes and read-write locks */
......@@ -219,6 +246,8 @@ mutex_create_func(
{
#if defined(_WIN32) && defined(UNIV_CAN_USE_X86_ASSEMBLER)
mutex_reset_lock_word(mutex);
#elif defined(HAVE_GCC_ATOMIC_BUILTINS)
mutex_reset_lock_word(mutex);
#else
os_fast_mutex_init(&(mutex->os_fast_mutex));
mutex->lock_word = 0;
......@@ -309,7 +338,9 @@ mutex_free(
os_event_free(mutex->event);
#if !defined(_WIN32) || !defined(UNIV_CAN_USE_X86_ASSEMBLER)
#if defined(_WIN32) && defined(UNIV_CAN_USE_X86_ASSEMBLER)
#elif defined(HAVE_GCC_ATOMIC_BUILTINS)
#else
os_fast_mutex_free(&(mutex->os_fast_mutex));
#endif
/* If we free the mutex protecting the mutex list (freeing is
......@@ -426,6 +457,12 @@ mutex_spin_wait(
#endif /* UNIV_DEBUG && !UNIV_HOTBACKUP */
ut_ad(mutex);
/* This update is not thread safe, but we don't mind if the count
isn't exact. Moved out of ifdef that follows because we are willing
to sacrifice the cost of counting this as the data is valuable.
Count the number of calls to mutex_spin_wait. */
mutex_spin_wait_count++;
mutex_loop:
i = 0;
......@@ -438,7 +475,6 @@ mutex_spin_wait(
spin_loop:
#if defined UNIV_DEBUG && !defined UNIV_HOTBACKUP
mutex_spin_wait_count++;
mutex->count_spin_loop++;
#endif /* UNIV_DEBUG && !UNIV_HOTBACKUP */
......@@ -503,8 +539,6 @@ mutex_spin_wait(
sync_array_reserve_cell(sync_primary_wait_array, mutex,
SYNC_MUTEX, file_name, line, &index);
mutex_system_call_count++;
/* The memory order of the array reservation and the change in the
waiters field is important: when we suspend a thread, we first
reserve the cell and then set waiters field to 1. When threads are
......@@ -551,7 +585,6 @@ mutex_spin_wait(
mutex->cfile_name, (ulong) mutex->cline, (ulong) i);
#endif
mutex_system_call_count++;
mutex_os_wait_count++;
#ifndef UNIV_HOTBACKUP
......@@ -1340,21 +1373,31 @@ sync_print_wait_info(
FILE* file) /* in: file where to print */
{
#ifdef UNIV_SYNC_DEBUG
fprintf(file, "Mutex exits %lu, rws exits %lu, rwx exits %lu\n",
fprintf(file, "Mutex exits %llu, rws exits %llu, rwx exits %llu\n",
mutex_exit_count, rw_s_exit_count, rw_x_exit_count);
#endif
fprintf(file,
"Mutex spin waits %lu, rounds %lu, OS waits %lu\n"
"RW-shared spins %lu, OS waits %lu;"
" RW-excl spins %lu, OS waits %lu\n",
(ulong) mutex_spin_wait_count,
(ulong) mutex_spin_round_count,
(ulong) mutex_os_wait_count,
(ulong) rw_s_spin_wait_count,
(ulong) rw_s_os_wait_count,
(ulong) rw_x_spin_wait_count,
(ulong) rw_x_os_wait_count);
"Mutex spin waits %llu, rounds %llu, OS waits %llu\n"
"RW-shared spins %llu, OS waits %llu;"
" RW-excl spins %llu, OS waits %llu\n",
mutex_spin_wait_count,
mutex_spin_round_count,
mutex_os_wait_count,
rw_s_spin_wait_count,
rw_s_os_wait_count,
rw_x_spin_wait_count,
rw_x_os_wait_count);
fprintf(file,
"Spin rounds per wait: %.2f mutex, %.2f RW-shared, "
"%.2f RW-excl\n",
(double) mutex_spin_round_count /
(mutex_spin_wait_count ? mutex_spin_wait_count : 1),
(double) rw_s_spin_round_count /
(rw_s_spin_wait_count ? rw_s_spin_wait_count : 1),
(double) rw_x_spin_round_count /
(rw_x_spin_wait_count ? rw_x_spin_wait_count : 1));
}
/***********************************************************************
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment