Merge trift2.:/MySQL/M50/mysql-5.0

into  trift2.:/MySQL/M50/push-5.0


mysql-test/mysql-test-run.pl:
  Auto merged

BUILD/check-cpu

@@ -164,26 +164,34 @@ check_cpu () {
 
   cc_ver=`$cc --version | sed 1q`
   cc_verno=`echo $cc_ver | sed -e 's/^.*gcc/gcc/g; s/[^0-9. ]//g;	 s/^ *//g; s/ .*//g'`
+  set -- `echo $cc_verno | tr '.' ' '`
+  cc_major=$1
+  cc_minor=$2
+  cc_patch=$3
+  cc_comp=`expr $cc_major '*' 100 '+' $cc_minor`
 
   case "$cc_ver--$cc_verno" in
     *GCC*)
         # different gcc backends (and versions) have different CPU flags
         case `gcc -dumpmachine` in
           i?86-*)
-                case "$cc_verno" in
-                      3.4*|3.5*|4.*)
-                            check_cpu_args='-mtune=$cpu_arg -march=$cpu_arg'
-                            ;;
-                      *)
-                            check_cpu_args='-mcpu=$cpu_arg -march=$cpu_arg'
-                            ;;
-            esac
+	    if test "$cc_comp" -lt 304
+            then
+                            check_cpu_args='-mcpu=$cpu_arg'
+            else
+                            check_cpu_args='-mtune=$cpu_arg'
+            fi
             ;;
           ppc-*)
                     check_cpu_args='-mcpu=$cpu_arg -mtune=$cpu_arg'
             ;;
           x86_64-*)
+	    if test "$cc_comp" -lt 304
+            then
+                            check_cpu_args='-mcpu=$cpu_arg'
+            else
                             check_cpu_args='-mtune=$cpu_arg'
+            fi
             ;;
           *)
             check_cpu_cflags=""

CMakeLists.txt

@@ -86,13 +86,17 @@ ENDIF(CYBOZU)
 
 # in some places we use DBUG_OFF
 SET(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -D DBUG_OFF")
+SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} -D DBUG_OFF")
 SET(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -D DBUG_OFF")
+SET(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} -D DBUG_OFF")
 
 IF(CMAKE_GENERATOR MATCHES "Visual Studio 8")
     SET(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /wd4996")
     SET(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /wd4996")
+    SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} /wd4996")
     SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /wd4996")
     SET(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /wd4996")
+    SET(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} /wd4996")
 ENDIF(CMAKE_GENERATOR MATCHES "Visual Studio 8")
 
 IF(CMAKE_GENERATOR MATCHES "Visual Studio 7" OR 
@@ -104,10 +108,14 @@ IF(CMAKE_GENERATOR MATCHES "Visual Studio 7" OR
 	       ${CMAKE_C_FLAGS_DEBUG_INIT})
 	STRING(REPLACE "/MD" "/MT" CMAKE_C_FLAGS_RELEASE 
 	       ${CMAKE_C_FLAGS_RELEASE})
+	STRING(REPLACE "/MD" "/MT" CMAKE_C_FLAGS_RELWITHDEBINFO 
+	       ${CMAKE_C_FLAGS_RELWITHDEBINFO})
 	STRING(REPLACE "/MDd" "/MTd" CMAKE_C_FLAGS_DEBUG 
 	       ${CMAKE_C_FLAGS_DEBUG})
 	STRING(REPLACE "/MD" "/MT" CMAKE_CXX_FLAGS_RELEASE 
 	       ${CMAKE_CXX_FLAGS_RELEASE})
+	STRING(REPLACE "/MD" "/MT" CMAKE_CXX_FLAGS_RELWITHDEBINFO 
+	       ${CMAKE_CXX_FLAGS_RELWITHDEBINFO})
 	STRING(REPLACE "/MDd" "/MTd" CMAKE_CXX_FLAGS_DEBUG 
 	       ${CMAKE_CXX_FLAGS_DEBUG})
 

Docs/.cvsignore

-COPYING
-COPYING.LIB
+INSTALL-SOURCE
 INSTALL-BINARY
 Makefile
 Makefile.in
-Manual-updates
-before-gpl-changes-manual.texi
-include.texi
-manual-before-gpl.texi
-manual-tmp.aux
-manual-tmp.cp
-manual-tmp.fn
-manual-tmp.ky
-manual-tmp.log
-manual-tmp.pdf
-manual-tmp.pg
-manual-tmp.texi
-manual-tmp.toc
-manual-tmp.tp
-manual-tmp.vr
-manual.aux
-manual.cp
-manual.cps
-manual.fn
-manual.fns
-manual.html
-manual.ky
-manual.log
-manual.pdf
-manual.pg
-manual.toc
-manual.tp
-manual.txt
-manual.vr
-manual_a4.ps
-manual_a4.ps.gz
-manual_letter.ps
-manual_letter.ps.gz
-manual_toc.html
 mysql.info

Docs/Support/.cvsignore

-manual.html
-manual_toc.html

Docs/Support/trivial-makeinfo-4.0c.patch

---- alt-multi.c	Sun Apr 14 10:03:19 2002
-+++ multi.c	Tue May 22 20:52:33 2001
-@@ -287,7 +287,7 @@
-                  && *params != '\n' && *params != '@')
-             params++;
-           setup_output_environment (i,
--                     (int) ((columnfrac * 100.00) + 0.49));
-+                     (int) (columnfrac * (fill_column - current_indent) + .5));
-         }
-       }
- 

Docs/bk.txt

-Mail by sasha, should be rewritten as a HOWTO sometimes
-vva added point C) for Windows-project
------------
-
-I have set up a repository with BitKeeper on work. There are still some things
-about it that I would like to learn, but I have gotten far enough with it to
-replace CVS functionality were are currently using, so let's just go ahead and
-get started on it. Please follow the instructions below (make sure to save the
-message for future reference):
-
-a) http://www.bitmover.com/download
-        user: beta
-        password: get bitkeeper
-
-  get the version appropriate for your platform - download it to a temp
-directory, chmod +x  and then run it. You will have to tell it which directory
-to install, for consistency, let's use /usr/local/bin
-
-b) we will take advantage of bk capablity of working with master/slave
-repositories. The master will be on work.mysql.com, the slaves will be our
-individual machines. The master repository has already been set up on work, so
-you will need just to set up a slave repository on your machine:
-
-  mkdir bk
-  cd bk
-  bk clone yourusername@work:/home/bk/mysql mysql
-  cd mysql
-  bk -r edit
-
-Now you have the entire source tree in the current directory. Let's compile it:
-
- BUILD/compile-pentium-debug
- 
-C) Windows project. 
-   - Compile Linux-project (see points above)
-   - run VC++Files/prepare
-   - make repository accessible for Windows (using samba)
-   - open VC++Files/mysql.dsw in Microsoft Visual Stidio (5.0 or above)
-
-After you edit a file, you need to check it in using bk citool or bk ci
-filename. Note that ci is different than commit - you ci a file, but you commit
-a change set. This is a very nice concept - instead of thinking of each
-individual file as CVS does, bk groups the changes you are making and allows you
-to document what you actually did between the commits as a whole, rather than
-just commenting on every file. When you commit, bk will ask you to comment on
-the change set.
-
-Commit is done just to your local repository. To make your changes global, you
-will need to run bk push. Be careful with that - it is a good idea to run bk
-push -l -n first too see what you are just about to push to the master
-repository.
-
-When somebody does a push, you will be getting a email ( I will set this up to
-day). You will then need to execute bk pull to update your sources. If there are
-any conflicts, bk will force you to resolve them by asking you questions on what
-to do with each conflict.
-
-To learn more about bk, use bk helptool - I will be doing this a lot in the next
-couple of days :-) If you find bugs or have questions/feature
-suggestions/comments for developers, feel free to e-mail dev@bitmover.com .
-Their developers, and especially the president of the company Larry McVoy really
-like MySQL and are very anxious to help us. Make sure it is obvious that you
-work for MySQL, of course. And, of course, do not bug them with little things
-that you can figure out on your own or with my help - they were nice to offer us
-support, but we should not abuse it.
\ No newline at end of file

Docs/internals.texi

-\input texinfo  @c -*-texinfo-*-
-@c
-@c *********************************************************
-@c
-@c This is a dummy placeholder file for internals.texi in the
-@c MySQL source trees.
-@c
-@c Note, that the internals documentation has been moved into a separate
-@c BitKeeper source tree named "mysqldoc" - do not attempt to edit this
-@c file! All changes to internals.texi should be done in the mysqldoc tree.
-@c
-@c See http://www.mysql.com/doc/en/Installing_source_tree.html
-@c for information about how to work with BitKeeper source trees.
-@c
-@c This dummy file is being replaced with the actual file from the
-@c mysqldoc tree when building the official source distribution.
-@c
-@c Please e-mail docs@mysql.com for more information or if
-@c you are interested in doing a translation.
-@c
-@c *********************************************************
-@c
-@c %**start of header
-
-@setfilename internals.info
-
-@c We want the types in the same index
-@syncodeindex tp fn
-
-@ifclear tex-debug
-@c This removes the black squares in the right margin
-@finalout
-@end ifclear
-
-@c Set background for HTML
-@set _body_tags BGCOLOR=silver TEXT=#000000 LINK=#101090 VLINK=#7030B0
-@c Set some style elements for the manual in HTML form. 'suggested'
-@c natural language colors: aqua, black, blue, fuchsia, gray, green,
-@c lime, maroon, navy, olive, purple, red, silver, teal, white, and
-@c yellow. From Steeve Buehler <ahr@YogElements.com>
-@set _extra_head <style> code {color:purple} tt {color:green} samp {color:navy} pre {color:maroon} </style>
-
-@settitle Dummy MySQL internals documentation for version @value{mysql_version}.
-
-@c We want single-sided heading format, with chapters on new pages. To
-@c get double-sided format change 'on' below to 'odd'
-@setchapternewpage on
-
-@paragraphindent 0
-
-@c %**end of header
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* mysql: (mysql).               MySQL documentation.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-
-@titlepage
-@sp 10
-@center @titlefont{Empty placeholder for the MySQL Internals Documentation}
-@sp 10
-@center Copyright @copyright{} 1995-2003 MySQL AB
-@c blank page after title page makes page 1 be a page front.
-@c also makes the back of the title page blank.
-@page
-@end titlepage
-
-@c This should be added. The HTML conversion also needs a MySQL version
-@c number somewhere.
-
-@iftex
-@c change this to double if you want formatting for double-sided
-@c printing
-@headings single
-
-@oddheading @thischapter @| @| @thispage
-@evenheading @thispage @| @| MySQL Internal Reference for Version @value{mysql_version}
-
-@end iftex
-
-@node Top, (dir), (dir), (dir)
-
-@ifinfo
-This is an empty placeholder file for the MySQL internals documentation.
-
-The real version of this file is now maintained in a separate BitKeeper
-source tree!  Please see
-@url{http://www.mysql.com/doc/en/Installing_source_tree.html} for more info
-on how to work with BitKeeper.
-
-Please do not attempt to edit this file directly - use the one in the
-@code{mysqldoc} BK tree instead.
-
-This file will be replaced with the current @code{internals.texi} when
-building the official source distribution.
-@end ifinfo
-
-@bye

Docs/linuxthreads.txt

+[Note this information is obsolete]
+
 Notes on compiling glibc for the standard MySQL binary:
 
  - make sure you have gcc 2.95 and gmake 3.79 or newer

Docs/my_sys.txt

-Functions i mysys: (For flags se my_sys.h)
-
- int my_copy _A((const char *from,const char *to,myf MyFlags));
-	- Copy file
-
- int my_delete _A((const char *name,myf MyFlags));
-	- Delete file
-
- int my_getwd _A((string buf,uint size,myf MyFlags));
- int my_setwd _A((const char *dir,myf MyFlags));
-	- Get and set working directory
-
- string my_tempnam _A((const char *pfx,myf MyFlags));
-	- Make a uniq temp file name by using dir and adding something after
-	 pfx to make name uniq. Name is made by adding a uniq 6 length-string
-	 and TMP_EXT after pfx.
-	 Returns pointer to malloced area for filename. Should be freed by
-	 free().
-
- File my_open _A((const char *FileName,int Flags,myf MyFlags));
- File my_create _A((const char *FileName,int CreateFlags,
-			  int AccsesFlags, myf MyFlags));
- int my_close _A((File Filedes,myf MyFlags));
- uint my_read _A((File Filedes,byte *Buffer,uint Count,myf MyFlags));
- uint my_write _A((File Filedes,const byte *Buffer,uint Count,
-			 myf MyFlags));
- ulong my_seek _A((File fd,ulong pos,int whence,myf MyFlags));
- ulong my_tell _A((File fd,myf MyFlags));
-	- Use instead of open,open-with-create-flag, close read and write
-	  to get automatic error-messages (flag: MYF_WME) and only have
-	  to test for != 0 if error (flag: MY_NABP).
-
- int my_rename _A((const char *from,const char *to,myf MyFlags));
-	- Rename file
-
- FILE *my_fopen _A((const char *FileName,int Flags,myf MyFlags));
- FILE *my_fdopen _A((File Filedes,int Flags,myf MyFlags));
- int my_fclose _A((FILE *fd,myf MyFlags));
- uint my_fread _A((FILE *stream,byte *Buffer,uint Count,myf MyFlags));
- uint my_fwrite _A((FILE *stream,const byte *Buffer,uint Count,
-			  myf MyFlags));
- ulong my_fseek _A((FILE *stream,ulong pos,int whence,myf MyFlags));
- ulong my_ftell _A((FILE *stream,myf MyFlags));
-	- Same read-interface for streams as for files
-
- gptr _mymalloc _A((uint uSize,const char *sFile,
-			  uint uLine, myf MyFlag));
- gptr _myrealloc _A((string pPtr,uint uSize,const char *sFile,
-			   uint uLine, myf MyFlag));
- void _myfree _A((gptr pPtr,const char *sFile,uint uLine));
- int _sanity _A((const char *sFile,unsigned int uLine));
- gptr _myget_copy_of_memory _A((const byte *from,uint length,
-				      const char *sFile, uint uLine,
-				      myf MyFlag));
-	- malloc(size,myflag) is mapped to this functions if not compiled
-	  with -DSAFEMALLOC
-
- void TERMINATE _A((void));
-	- Writes malloc-info on stdout if compiled with -DSAFEMALLOC.
-
- int my_chsize _A((File fd,ulong newlength,myf MyFlags));
-	- Change size of file
-
- void my_error _D((int nr,myf MyFlags, ...));
-	- Writes message using error number (se mysys/errors.h) on
-	  stdout or curses if  MYSYS_PROGRAM_USES_CURSES() is called.
-
- void my_message _A((const char *str,myf MyFlags));
-	- Writes message-string on
-	 stdout or curses if  MYSYS_PROGRAM_USES_CURSES() is called.
-
- void my_init _A((void ));
-	- Start each program (in main) with this.
- void my_end _A((int infoflag));
-	- Gives info about program.
-	- If infoflag & MY_CHECK_ERROR prints if some files are left open
-	- If infoflag & MY_GIVE_INFO   prints timing info and malloc info
-	  about prog.
-
- int my_redel _A((const char *from, const char *to, int MyFlags));
-	- Delete from before rename of to to from. Copyes state from old
-	  file to new file. If MY_COPY_TIME is set sets old time.
-
- int my_copystat _A((const char *from, const char *to, int MyFlags));
-	- Copye state from old file to new file.
-	  If MY_COPY_TIME is set sets copy also time.
-
- string my_filename _A((File fd));
-	- Give filename of open file.
-
- int dirname _A((string to,const char *name));
-	- Copy name of directory from filename.
-
- int test_if_hard_path _A((const char *dir_name));
-	- Test if dirname is a hard path (Starts from root)
-
- void convert_dirname _A((string name));
-	- Convert dirname acording to system.
-	  - In MSDOS changes all caracters to capitals and changes '/' to
-	    '\'
- string fn_ext _A((const char *name));
-	- Returns pointer to extension in filename
- string fn_format _A((string to,const char *name,const char *dsk,
-			    const char *form,int flag));
-	format a filename with replace of library and extension and
-	converts between different systems.
-	params to and name may be identicall
-	function dosn't change name if name != to
-	Flag may be:	1   force replace filnames library with 'dsk'
-			2   force replace extension with 'form' */
-			4   force Unpack filename (replace ~ with home)
-			8   Pack filename as short as possibly for output to
-			    user.
-	All open requests should allways use at least:
-	"open(fn_format(temp_buffe,name,"","",4),...)" to unpack home and
-	convert filename to system-form.
-
- string fn_same _A((string toname,const char *name,int flag));
-	- Copys directory and extension from name to toname if neaded.
-	  copy can be forced by same flags that in fn_format.
-
- int wild_compare _A((const char *str,const char *wildstr));
-	- Compare if str matches wildstr. Wildstr can contain "*" and "?"
-	  as match-characters.
-	  Returns 0 if match.
-
- void get_date _A((string to,int timeflag));
-	- Get current date in a form ready for printing.
-
- void soundex _A((string out_pntr, string in_pntr))
-	- Makes in_pntr to a 5 chars long string. All words that sounds
-	  alike have the same string.
-
- int init_key_cache _A((ulong use_mem,ulong leave_this_much_mem));
-	- Use cacheing of keys in MISAM, PISAM, and ISAM.
-	  KEY_CACHE_SIZE is a good size.
-	  - Remember to lock databases for optimal cacheing
-
- void end_key_cache _A((void));
-	- End key-cacheing.

extra/yassl/taocrypt/benchmark/Makefile.am

 INCLUDES = -I$(srcdir)/../include -I$(srcdir)/../mySTL
-bin_PROGRAMS       = benchmark
+noinst_PROGRAMS    = benchmark
 benchmark_SOURCES  = benchmark.cpp
 benchmark_LDADD    = $(top_builddir)/extra/yassl/taocrypt/src/libtaocrypt.la
 benchmark_CXXFLAGS = -DYASSL_PURE_C

mysql-test/mysql-test-run.pl

@@ -3641,8 +3641,16 @@ sub mysqld_arguments ($$$$) {
 
   if ( $mysql_version_id >= 50036)
   {
-    # Prevent the started mysqld to access files outside of vardir
-    mtr_add_arg($args, "%s--secure-file-priv=%s", $prefix, $opt_vardir);
+    # By default, prevent the started mysqld to access files outside of vardir
+    my $secure_file_dir= $opt_vardir;
+    if ( $opt_suite ne "main" )
+    {
+      # When running a suite other than default allow the mysqld
+      # access to subdirs of mysql-test/ in order to make it possible
+      # to "load data" from the suites data/ directory.
+      $secure_file_dir= $glob_mysql_test_dir;
+    }
+    mtr_add_arg($args, "%s--secure-file-priv=%s", $prefix, $secure_file_dir);
   }
 
   if ( $mysql_version_id >= 50000 )

mysys/CMakeLists.txt

@@ -22,7 +22,9 @@ SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -DSAFEMALLOC -DSAFE_MUTEX")
 # Currently, USE_TLS crashes in Debug builds, so until that is fixed Debug
 # .dlls cannot be loaded at runtime.
 SET(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -DUSE_TLS")
+SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} -DUSE_TLS")
 SET(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DUSE_TLS")
+SET(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} -DUSE_TLS")
 
 INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/zlib ${CMAKE_SOURCE_DIR}/include ${CMAKE_SOURCE_DIR}/mysys )
 ADD_LIBRARY(mysys array.c charset-def.c charset.c checksum.c default.c default_modify.c

scripts/fill_func_tables.sh

-#!@PERL@
-# Copyright (C) 2003 MySQL AB
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-#
-# fill_func_tables - parse ../Docs/manual.texi 
-#
-# Original version by Victor Vagin <vva@mysql.com>
-#
-
-my $cat_name= "";
-my $func_name= "";
-my $text= "";
-my $example= "";
-
-local $mode= "";
-
-sub prepare_name
-{
-  my ($a)= @_;
-
-  $a =~ s/(\@itemize \@bullet)/  /g;
-  $a =~ s/(\@end itemize)/  /g;
-  $a =~ s/(\@end multitable)/  /g;
-  $a =~ s/(\@end table)/  /g;
-  $a =~ s/(\@cindex(.*?)\n)/  /g;
-  $a =~ s/(\@multitable \@columnfractions(.*?)\n)/  /g;
-  $a =~ s/(\@node(.*?)\n)/  /g;
-  $a =~ s/(\@tab)/\t/g;
-  $a =~ s/\@item/  /g;
-  $a =~ s/\@code\{((.|\n)+?)\}/$1/go;
-  $a =~ s/\@strong\{(.+?)\}/$1/go;
-  $a =~ s/\@samp\{(.+?)\}/$1/go;
-  $a =~ s/\@emph\{((.|\n)+?)\}/\/$1\//go;
-  $a =~ s/\@xref\{((.|\n)+?)\}/See also : [$1]/go;
-  $a =~ s/\@ref\{((.|\n)+?)\}/[$1]/go;
-  $a =~ s/\'/\'\'/g;
-  $a =~ s/\\/\\\\/g;
-  $a =~ s/\`/\`\`/g;
-
-  $a =~ s/\@table \@code/  /g;
-
-  $a =~ s/\(\)//g;
-
-  $a =~ s/((\w|\s)+)\(([\+-=><\/%*!<>\s]+)\)/$3/gxs; #$a =~ s/((\w|\s)+)\(([\+-=><\/%*!<>\s]+)\)/$3 $1/gxs;
-  $a =~ s/([\+-=><\/%*!<>\s]+)\(((\w|\s)+)\)/$1/gxs;#$a =~ s/([\+-=><\/%*!<>\s]+)\(((\w|\s)+)\)/$1 $2/gxs;
-  $a =~ s/((\w|\s)+)\((.+)\)/$1/gxs;
-
-  return $a;
-}
-
-sub prepare_text
-{
-  my ($a)= @_;
-
-  $a =~ s/(\@itemize \@bullet)/  /g;
-  $a =~ s/(\@end itemize)/  /g;
-  $a =~ s/(\@end multitable)/  /g;
-  $a =~ s/(\@end table)/  /g;
-  $a =~ s/(\@cindex(.*?)\n)/  /g;
-  $a =~ s/(\@multitable \@columnfractions(.*?)\n)/  /g;
-  $a =~ s/(\@node(.*?)\n)/  /g;
-  $a =~ s/(\@tab)/\t/g;
-  $a =~ s/\@itemx/  /g;
-  $a =~ s/\@item/  /g;
-  $a =~ s/\@code\{((.|\n)+?)\}/$1/go;
-  $a =~ s/\@strong\{(.+?)\}/$1/go;
-  $a =~ s/\@samp\{(.+?)\}/$1/go;
-  $a =~ s/\@emph\{((.|\n)+?)\}/\/$1\//go;
-  $a =~ s/\@xref\{((.|\n)+?)\}/See also : [$1]/go;
-  $a =~ s/\@ref\{((.|\n)+?)\}/[$1]/go;
-  $a =~ s/\'/\'\'/g;
-  $a =~ s/\\/\\\\/g;
-  $a =~ s/\`/\`\`/g;
-  $a =~ s/(\n*?)$//g;
-  $a =~ s/\n/\\n/g;
-
-  $a =~ s/\@table \@code/  /g;
-
-  return $a;
-}
-
-sub prepare_example
-{
-  my ($a)= @_;
-
-  $a =~ s/\'/\'\'/g;
-  $a =~ s/\\/\\\\/g;
-  $a =~ s/\`/\`\`/g;
-  $a =~ s/(\n*?)$//g;
-  $a =~ s/\n/\\n/g;
-
-  return $a;
-}
-
-sub flush_all
-{
-  my ($mode) = @_;
-
-  if ($mode eq ""){return;}
-
-  $func_name= prepare_name($func_name);
-  $text= prepare_text($text);
-  $example= prepare_example($example);
-
-  if ($func_name ne "" && $text ne "" && !($func_name =~ /[abcdefghikjlmnopqrstuvwxyz]/)){
-    print "INSERT INTO function (name,description,example) VALUES (";
-    print "'$func_name',";
-    print "'$text',";
-    print "'$example'";
-    print ");\n";
-    print "INSERT INTO function_category (cat_id,func_id) VALUES (\@cur_category,LAST_INSERT_ID());\n";
-  }
-
-  $func_name= "";
-  $text= "";
-  $example= "";
-  $mode= "";
-}
-
-sub new_category
-{
-  my ($category)= @_;
-
-  $category= prepare_text($category);
-
-  print "INSERT INTO function_category_name (name) VALUES (\'$category\');\n";
-  print "SELECT \@cur_category:=LAST_INSERT_ID();\n";
-}
-
-print "INSERT INTO db (Host,DB,User,Select_priv) VALUES ('%','mysql_help','','Y');\n";
-print "CREATE DATABASE mysql_help;\n";
-
-print "USE mysql_help;\n";
-
-print "DROP TABLE IF EXISTS function;\n";
-print "CREATE TABLE function (";
-print "  func_id       int unsigned not null auto_increment,";
-print "  name          char(64) not null,";
-print "  url           char(128) not null,";
-print "  description   text not null,";
-print "  example       text not null,";
-print "  min_args      tinyint not null,";
-print "  max_args      tinyint,";
-print "  date_created  datetime not null,";
-print "  last_modified timestamp not null,";
-print "  primary key   (func_id)";
-print ") type=myisam;\n\n";
-
-print "DROP TABLE IF EXISTS function_category_name;\n";
-print "CREATE TABLE function_category_name (";
-print "  cat_id        smallint unsigned not null auto_increment,";
-print "  name          char(64) not null,";
-print "  url           char(128) not null,";
-print "  date_created  datetime not null,";
-print "  last_modified timestamp not null,";
-print "  primary key   (cat_id)";
-print ") type=myisam;\n\n";
-
-print "DROP TABLE IF EXISTS function_category;\n";
-print "CREATE TABLE function_category (";
-print "  cat_id        smallint unsigned not null references function_category_name,";
-print "  func_id       int unsigned not null references function,";
-print "  primary key   (cat_id, func_id)";
-print ") type=myisam;\n\n";
-
-print "DELETE FROM function_category_name;\n";
-print "DELETE FROM function_category;\n";
-print "DELETE FROM function;\n";
-print "SELECT \@cur_category:=null;\n\n";
-
-my $in_section_6_3= 0;
-
-for(<>)
-{
-  if ($_=~/\@section Functions for Use in \@code{SELECT} and \@code{WHERE} Clauses/ &&
-      !$in_section_6_3){
-    $in_section_6_3= 1;
-    next;
-  }
-
-  if ($_=~/\@section/ && $in_section_6_3){
-    $in_section_6_3= 0;
-    next;
-  }
-
-  if (!$in_section_6_3) { next; }
-
-  my $c_name= "";
-
-  ($c_name)=m|\@c for_mysql_help,(.+?)$|;
-  if (!($c_name eq "") && ! ($c_name =~ m/$cat_name/i)){
-    ($cat_name)= $c_name;
-    new_category($cat_name);
-    next;
-  }
-
-  ($c_name)=m|\@subsubsection (.+?)$|;
-  if (!($c_name eq "") && ! ($c_name =~ m/$cat_name/i)){
-    ($cat_name)= $c_name;
-    new_category($cat_name);
-    next;
-  }
-
-  ($c_name)=m|\@subsection (.+?)$|;
-  if (!($c_name eq "") && ! ($c_name =~ m/$cat_name/i)){
-    ($cat_name)= $c_name;
-    new_category($cat_name);
-    next;
-  }
-
-  ($f_name)=m|\@findex (.+?)$|;
-  if (!($f_name eq "")){
-    flush_all($mode);
-    ($func_name)= ($f_name);
-    $mode= "text";
-    next;
-  }
-
-  if ($_=~/\@example/ && ($mode eq "text")){
-    $mode= "example";
-    next;
-  }
-
-  if ($_=~/\@end example/ && ($mode eq "example")){
-    flush_all($mode);
-    next;
-  }
-
-  if ($mode eq "text")    { $text    .= $_; }
-  if ($mode eq "example") { $example .= $_; }
-}
-
-
-print "DELETE function_category_name ";
-print "FROM function_category_name ";
-print "LEFT JOIN function_category ON function_category.cat_id=function_category_name.cat_id ";
-print "WHERE function_category.cat_id is null;"
-