Skip to content

M
MariaDB
Commit b63c7b2b authored by Matthias Leich's avatar Matthias Leich
Browse files
Options

Merge into actual tree

parents 77d957af e7004ec5
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1402 additions and 987 deletions
mysql-test/include/wait_until_count_sessions.inc
View file @ b63c7b2b
......@@ -2,14 +2,23 @@
#
# SUMMARY
#
# Waits until the passed number ($count_sessions) of concurrent sessions was
# observed via
# Waits until the passed number ($count_sessions) of concurrent sessions or
# a smaller number was observed via
# SHOW STATUS LIKE 'Threads_connected'
# or the operation times out.
# Note: Starting with 5.1 we could also use
# SELECT COUNT(*) FROM information_schema.processlist
# I stay with "SHOW STATUS LIKE 'Threads_connected'" because this
# runs in all versions 5.0+
# Note:
# 1. We wait for $current_sessions <= $count_sessions because in the use case
# with count_sessions.inc before and wait_until_count_sessions.inc after
# the core of the test it could happen that the disconnects of sessions
# belonging to the preceeding test are not finished.
# sessions at test begin($count_sessions) = m + n
# sessions of the previous test which will be soon disconnected = n (n >= 0)
# sessions at test end ($current sessions, assuming the test disconnects
# all additional sessions) = m
# 2. Starting with 5.1 we could also use
# SELECT COUNT(*) FROM information_schema.processlist
# I stay with "SHOW STATUS LIKE 'Threads_connected'" because this
# runs in all versions 5.0+
#
#
# USAGE
......@@ -19,20 +28,20 @@
#
# OR typical example of a test which uses more than one session
# Such a test could harm successing tests if there is no server shutdown
# and start between.cw
# and start between.
#
# If the testing box is slow than the disconnect of sessions belonging to
# the current test might happen when the successing test gets executed.
# This means the successing test might see activities like unexpected
# rows within the general log or the PROCESSLIST.
# Example from bug http://bugs.mysql.com/bug.php?id=40377
# --- bzr_mysql-6.0-rpl/.../r/log_state.result
# --- bzr_mysql-6.0-rpl/.../r/log_state.result
# +++ bzr_mysql-6.0-rpl/.../r/log_state.reject
# @@ -25,6 +25,7 @@
# event_time user_host ... command_type argument
# TIMESTAMP USER_HOST ... Query create table t1(f1 int)
# TIMESTAMP USER_HOST ... Query select * from mysql.general_log
# +TIMESTAMP USER_HOST ... Quit
# event_time user_host ... command_type argument
# TIMESTAMP USER_HOST ... Query create table t1(f1 int)
# TIMESTAMP USER_HOST ... Query select * from mysql.general_log
# +TIMESTAMP USER_HOST ... Quit
# ....
#
# What to do?
......@@ -79,7 +88,11 @@
# backup.test, grant3.test
#
#
# Created: 2009-01-14 mleich
# Created:
# 2009-01-14 mleich
# Modified:
# 2009-02-24 mleich Fix Bug#43114 wait_until_count_sessions too restrictive,
# random PB failures
#
let $wait_counter= 100;
......@@ -93,7 +106,7 @@ let $wait_timeout= 0;
while ($wait_counter)
{
let $current_sessions= query_get_value(SHOW STATUS LIKE 'Threads_connected', Value, 1);
let $success= `SELECT $current_sessions = $count_sessions`;
let $success= `SELECT $current_sessions <= $count_sessions`;
if ($success)
{
let $wait_counter= 0;
......@@ -107,7 +120,7 @@ while ($wait_counter)
if (!$success)
{
--echo # Timeout in wait_until_count_sessions.inc
--echo # Number of sessions expected: $count_sessions found: $current_sessions
--echo # Number of sessions expected: <= $count_sessions found: $current_sessions
SHOW PROCESSLIST;
}
mysql-test/r/connect.result
View file @ b63c7b2b
......@@ -188,7 +188,7 @@ DROP USER mysqltest_u1@localhost;
# -- End of Bug#33507.
# -- Bug#35074: max_used_connections is not correct.
# -- Bug#35074: max_used_connections is not correct.
FLUSH STATUS;
......
mysql-test/r/consistent_snapshot.result
View file @ b63c7b2b
drop table if exists t1;
create table t1 (a int) engine=innodb;
start transaction with consistent snapshot;
insert into t1 values(1);
select * from t1;
DROP TABLE IF EXISTS t1;
# Establish connection con1 (user=root)
# Establish connection con2 (user=root)
# Switch to connection con1
CREATE TABLE t1 (a INT) ENGINE=innodb;
START TRANSACTION WITH CONSISTENT SNAPSHOT;
# Switch to connection con2
INSERT INTO t1 VALUES(1);
# Switch to connection con1
SELECT * FROM t1;
a
commit;
delete from t1;
start transaction;
insert into t1 values(1);
select * from t1;
COMMIT;
DELETE FROM t1;
START TRANSACTION;
# Switch to connection con2
INSERT INTO t1 VALUES(1);
# Switch to connection con1
SELECT * FROM t1;
a
1
commit;
drop table t1;
COMMIT;
# Switch to connection default + close connections con1 and con2
DROP TABLE t1;
mysql-test/r/dirty_close.result
View file @ b63c7b2b
drop table if exists t1;
create table t1 (n int);
insert into t1 values (1),(2),(3);
select * from t1;
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (n INT);
INSERT INTO t1 VALUES (1),(2),(3);
SELECT * FROM t1;
n
1
2
3
drop table t1;
DROP TABLE t1;
mysql-test/r/flush_block_commit.result
View file @ b63c7b2b
drop table if exists t1;
create table t1 (a int) engine=innodb;
begin;
insert into t1 values(1);
flush tables with read lock;
select * from t1;
# Establish connection con1 (user=root)
# Establish connection con2 (user=root)
# Establish connection con3 (user=root)
# Switch to connection con1
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (a INT) ENGINE=innodb;
BEGIN;
INSERT INTO t1 VALUES(1);
# Switch to connection con2
FLUSH TABLES WITH READ LOCK;
SELECT * FROM t1;
a
commit;
select * from t1;
# Switch to connection con1
COMMIT;
# Switch to connection con2
SELECT * FROM t1;
a
unlock tables;
begin;
select * from t1 for update;
UNLOCK TABLES;
# Switch to connection con1
# Switch to connection con1
BEGIN;
SELECT * FROM t1 FOR UPDATE;
a
1
begin;
select * from t1 for update;
flush tables with read lock;
commit;
# Switch to connection con2
BEGIN;
SELECT * FROM t1 FOR UPDATE;
# Switch to connection con3
FLUSH TABLES WITH READ LOCK;
# Switch to connection con1
COMMIT;
# Switch to connection con2
a
1
unlock tables;
commit;
begin;
insert into t1 values(10);
flush tables with read lock;
commit;
unlock tables;
flush tables with read lock;
unlock tables;
begin;
select * from t1;
# Switch to connection con3
UNLOCK TABLES;
# Switch to connection con2
COMMIT;
# Switch to connection con1
BEGIN;
INSERT INTO t1 VALUES(10);
FLUSH TABLES WITH READ LOCK;
COMMIT;
UNLOCK TABLES;
# Switch to connection con2
FLUSH TABLES WITH READ LOCK;
UNLOCK TABLES;
BEGIN;
SELECT * FROM t1;
a
1
10
show create database test;
SHOW CREATE DATABASE test;
Database Create Database
test CREATE DATABASE `test` /*!40100 DEFAULT CHARACTER SET latin1 */
drop table t1;
DROP TABLE t1;
# Switch to connection default and close connections con1, con2, con3
mysql-test/r/flush_block_commit_notembedded.result
View file @ b63c7b2b
create table t1 (a int) engine=innodb;
reset master;
set autocommit=0;
insert t1 values (1);
flush tables with read lock;
show master status;
# Establish connection con1 (user=root)
# Establish connection con2 (user=root)
# Switch to connection con1
CREATE TABLE t1 (a INT) ENGINE=innodb;
RESET MASTER;
SET AUTOCOMMIT=0;
INSERT t1 VALUES (1);
# Switch to connection con2
FLUSH TABLES WITH READ LOCK;
SHOW MASTER STATUS;
File Position Binlog_Do_DB Binlog_Ignore_DB
master-bin.000001 106
commit;
show master status;
# Switch to connection con1
COMMIT;
# Switch to connection con2
SHOW MASTER STATUS;
File Position Binlog_Do_DB Binlog_Ignore_DB
master-bin.000001 106
unlock tables;
drop table t1;
set autocommit=1;
UNLOCK TABLES;
# Switch to connection con1
DROP TABLE t1;
SET AUTOCOMMIT=1;
# Switch to connection default and close connections con1 and con2
mysql-test/r/flush_read_lock_kill.result
View file @ b63c7b2b
set @old_concurrent_insert= @@global.concurrent_insert;
set @@global.concurrent_insert= 0;
drop table if exists t1;
create table t1 (kill_id int);
insert into t1 values(connection_id());
flush tables with read lock;
select ((@id := kill_id) - kill_id) from t1;
SET @old_concurrent_insert= @@global.concurrent_insert;
SET @@global.concurrent_insert= 0;
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (kill_id INT);
INSERT INTO t1 VALUES(connection_id());
FLUSH TABLES WITH READ LOCK;
SELECT ((@id := kill_id) - kill_id) FROM t1;
((@id := kill_id) - kill_id)
0
kill connection @id;
drop table t1;
set @@global.concurrent_insert= @old_concurrent_insert;
KILL CONNECTION @id;
DROP TABLE t1;
SET @@global.concurrent_insert= @old_concurrent_insert;
mysql-test/r/lock_multi.result
View file @ b63c7b2b
......@@ -51,10 +51,10 @@ Field Type Null Key Default Extra
a int(11) YES NULL
unlock tables;
drop table t1;
use mysql;
USE mysql;
LOCK TABLES columns_priv WRITE, db WRITE, host WRITE, user WRITE;
FLUSH TABLES;
use mysql;
USE mysql;
SELECT user.Select_priv FROM user, db WHERE user.user = db.user LIMIT 1;
OPTIMIZE TABLES columns_priv, db, host, user;
Table Op Msg_type Msg_text
......@@ -65,7 +65,7 @@ mysql.user optimize status OK
UNLOCK TABLES;
Select_priv
N
use test;
USE test;
use test;
CREATE TABLE t1 (c1 int);
LOCK TABLE t1 WRITE;
......@@ -133,8 +133,8 @@ DROP TABLE t1;
End of 5.0 tests
create table t1 (i int);
lock table t1 read;
update t1 set i= 10;;
select * from t1;;
update t1 set i= 10;
select * from t1;
kill query ID;
i
ERROR 70100: Query execution was interrupted
......
mysql-test/r/mysqlbinlog.result
View file @ b63c7b2b
......@@ -391,9 +391,9 @@ DELIMITER ;
ROLLBACK /* added by mysqlbinlog */;
/*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;
CREATE TABLE t1 (c1 CHAR(10));
flush logs;
FLUSH LOGS;
INSERT INTO t1 VALUES ('0123456789');
flush logs;
FLUSH LOGS;
DROP TABLE t1;
We expect this value to be 1
The bug being tested was that 'Query' lines were not preceded by '#'
......@@ -403,16 +403,16 @@ SELECT COUNT(*) AS `BUG#28293_expect_1` FROM patch WHERE a LIKE '%Query%';
BUG#28293_expect_1
1
DROP TABLE patch;
flush logs;
create table t1(a int);
insert into t1 values(connection_id());
flush logs;
drop table t1;
FLUSH LOGS;
CREATE TABLE t1(a INT);
INSERT INTO t1 VALUES(connection_id());
FLUSH LOGS;
DROP TABLE t1;
1
drop table t1;
DROP TABLE t1;
shell> mysqlbinlog std_data/corrupt-relay-bin.000624 > var/tmp/bug31793.sql
flush logs;
BUG#31611: Security risk with BINLOG statement
FLUSH LOGS;
Bug#31611 Security risk with BINLOG statement
SET BINLOG_FORMAT=ROW;
CREATE DATABASE mysqltest1;
CREATE USER untrusted@localhost;
......@@ -435,7 +435,7 @@ a b
1 root@localhost
DROP DATABASE mysqltest1;
DROP USER untrusted@localhost;
BUG#32580: mysqlbinlog cannot read binlog event with user variables
Bug#32580 mysqlbinlog cannot read binlog event with user variables
USE test;
SET BINLOG_FORMAT = STATEMENT;
FLUSH LOGS;
......@@ -460,15 +460,15 @@ an_int 1000
a_decimal 907.79
a_string Just a test
DROP TABLE t1;
set @@global.server_id= 4294967295;
reset master;
flush logs;
select
(@a:=load_file("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
is not null;
(@a:=load_file("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
is not null
SET @@global.server_id= 4294967295;
RESET MASTER;
FLUSH LOGS;
SELECT
(@a:=LOAD_FILE("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
IS NOT NULL;
(@a:=LOAD_FILE("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
IS NOT NULL
1
*** Unsigned server_id 4294967295 is found: 1 ***
set @@global.server_id= 1;
SET @@global.server_id= 1;
End of 5.1 tests
mysql-test/r/mysqltest.result
View file @ b63c7b2b
......@@ -743,10 +743,12 @@ select 1;
-- a comment for the server;
mysqltest: At line 1: Found line beginning with -- that didn't contain a valid mysqltest command, check your syntax or use # if you intended to write a comment
con1
con2
default
con1
default
con1
con2
con1
con2
con2
-closed_connection-
End of tests
mysql-test/r/read_only.result
View file @ b63c7b2b
......@@ -128,7 +128,7 @@ set global read_only=0;
drop table t1,t2;
drop user test@localhost;
#
# Bug #27440 read_only allows create and drop database
# Bug#27440 read_only allows create and drop database
#
set global read_only= 1;
drop database if exists mysqltest_db1;
......
mysql-test/r/show_check.result
View file @ b63c7b2b
......@@ -545,9 +545,9 @@ mysqltest CREATE DATABASE `mysqltest` /*!40100 DEFAULT CHARACTER SET latin1 */
drop table mysqltest.t1;
drop database mysqltest;
set names binary;
delete from mysql.user
delete from mysql.user
where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
delete from mysql.db
delete from mysql.db
where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
flush privileges;
CREATE TABLE t1 (i int, KEY (i)) ENGINE=MEMORY;
......@@ -664,7 +664,7 @@ show create table t1;
ERROR HY000: Incorrect information in file: './test/t1.frm'
drop table if exists t1;
# Bug#12183: SHOW OPEN TABLES behavior doesn't match grammar.
# Bug#12183 SHOW OPEN TABLES behavior doesn't match grammar.
DROP DATABASE IF EXISTS mysqltest1;
CREATE DATABASE mysqltest1;
......@@ -784,7 +784,7 @@ show status like 'slow_queries';
Variable_name Value
Slow_queries 1
create table t1 (a int);
create trigger tr1 before insert on t1 for each row
create trigger tr1 before insert on t1 for each row
begin
end;
create view v1 as select a from t1;
......@@ -1010,7 +1010,7 @@ def TRIGGERS DATABASE_COLLATION Database Collation 253 96 17 N 1 0 33
Trigger Event Table Statement Timing Created sql_mode Definer character_set_client collation_connection Database Collation
t1_bi INSERT t1 SET @a = 1 BEFORE NULL root@localhost binary binary latin1_swedish_ci
----------------------------------------------------------------
SELECT
SELECT
TRIGGER_CATALOG,
TRIGGER_SCHEMA,
TRIGGER_NAME,
......
mysql-test/r/skip_name_resolve.result
View file @ b63c7b2b
......@@ -5,7 +5,7 @@ GRANT USAGE ON *.* TO 'mysqltest_1'@'127.0.0.1/255.255.255.255'
GRANT ALL PRIVILEGES ON `test`.* TO 'mysqltest_1'@'127.0.0.1/255.255.255.255'
REVOKE ALL ON test.* FROM mysqltest_1@'127.0.0.1/255.255.255.255';
DROP USER mysqltest_1@'127.0.0.1/255.255.255.255';
select user();
user()
SELECT USER();
USER()
#
show processlist;
SHOW PROCESSLIST;
mysql-test/r/sp-security.result
View file @ b63c7b2b
......@@ -342,12 +342,12 @@ GRANT SUPER ON *.* TO mysqltest_2@localhost;
GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
---> connection: mysqltest_2_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE wl2897_p1() SELECT 1;
CREATE FUNCTION wl2897_f1() RETURNS INT RETURN 1;
---> connection: mysqltest_1_con
use mysqltest;
USE mysqltest;
CREATE DEFINER=root@localhost PROCEDURE wl2897_p2() SELECT 2;
ERROR 42000: Access denied; you need the SUPER privilege for this operation
CREATE DEFINER=root@localhost FUNCTION wl2897_f2() RETURNS INT RETURN 2;
......@@ -363,7 +363,7 @@ Warnings:
Note 1449 The user specified as a definer ('a @ b @ c'@'localhost') does not exist
---> connection: con1root
use mysqltest;
USE mysqltest;
SHOW CREATE PROCEDURE wl2897_p1;
Procedure sql_mode Create Procedure character_set_client collation_connection Database Collation
wl2897_p1 CREATE DEFINER=`mysqltest_2`@`localhost` PROCEDURE `wl2897_p1`()
......@@ -393,7 +393,7 @@ CREATE USER mysqltest_2@localhost;
GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
---> connection: mysqltest_1_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE bug13198_p1()
SELECT 1;
CREATE FUNCTION bug13198_f1() RETURNS INT
......@@ -406,7 +406,7 @@ bug13198_f1()
1
---> connection: mysqltest_2_con
use mysqltest;
USE mysqltest;
CALL bug13198_p1();
1
1
......@@ -418,7 +418,7 @@ bug13198_f1()
DROP USER mysqltest_1@localhost;
---> connection: mysqltest_2_con
use mysqltest;
USE mysqltest;
CALL bug13198_p1();
ERROR HY000: The user specified as a definer ('mysqltest_1'@'localhost') does not exist
SELECT bug13198_f1();
......@@ -435,7 +435,7 @@ Host User Password
localhost user19857 *82DC221D557298F6CE9961037DB1C90604792F5C
---> connection: mysqltest_2_con
use test;
USE test;
CREATE PROCEDURE sp19857() DETERMINISTIC
BEGIN
DECLARE a INT;
......
mysql-test/r/view.result
View file @ b63c7b2b
......@@ -1673,9 +1673,9 @@ INSERT INTO t2 VALUES (4,3,'n');
INSERT INTO t2 VALUES (6,1,'n');
INSERT INTO t2 VALUES (8,1,'y');
CREATE VIEW v1 AS SELECT * FROM t1;
SELECT a.col1,a.col2,b.col2,b.col3
SELECT a.col1,a.col2,b.col2,b.col3
FROM t1 a LEFT JOIN t2 b ON a.col1=b.col1
WHERE b.col2 IS NULL OR
WHERE b.col2 IS NULL OR
b.col2=(SELECT MAX(col2) FROM t2 b WHERE b.col1=a.col1);
col1 col2 col2 col3
1 trudy 2 y
......@@ -1687,9 +1687,9 @@ col1 col2 col2 col3
7 carsten NULL NULL
8 ranger 1 y
10 matt NULL NULL
SELECT a.col1,a.col2,b.col2,b.col3
SELECT a.col1,a.col2,b.col2,b.col3
FROM v1 a LEFT JOIN t2 b ON a.col1=b.col1
WHERE b.col2 IS NULL OR
WHERE b.col2 IS NULL OR
b.col2=(SELECT MAX(col2) FROM t2 b WHERE b.col1=a.col1);
col1 col2 col2 col3
1 trudy 2 y
......@@ -1743,7 +1743,7 @@ A A
2 2
3 3
create table t3 as select a a,a b from t2;
create view v2 as select * from t3 where
create view v2 as select * from t3 where
a in (select * from t1) or b in (select * from t2);
select * from v2 A, v2 B where A.a = B.b;
a b a b
......@@ -1999,7 +1999,7 @@ dkjhgd
drop view v1;
create table t1 (f59 int, f60 int, f61 int);
insert into t1 values (19,41,32);
create view v1 as select f59, f60 from t1 where f59 in
create view v1 as select f59, f60 from t1 where f59 in
(select f59 from t1);
update v1 set f60=2345;
ERROR HY000: The target table v1 of the UPDATE is not updatable
......@@ -2115,7 +2115,7 @@ pid int NOT NULL
INSERT INTO t1 VALUES(1,'a','b'), (2,'c','d');
INSERT INTO t2 values (1,1), (2,1), (2,2);
CREATE VIEW v1 AS SELECT t1.*,t2.pid FROM t1,t2 WHERE t1.aid = t2.aid;
SELECT pid,GROUP_CONCAT(CONCAT(fn,' ',ln) ORDER BY 1) FROM t1,t2
SELECT pid,GROUP_CONCAT(CONCAT(fn,' ',ln) ORDER BY 1) FROM t1,t2
WHERE t1.aid = t2.aid GROUP BY pid;
pid GROUP_CONCAT(CONCAT(fn,' ',ln) ORDER BY 1)
1 a b,c d
......@@ -2217,7 +2217,7 @@ group_name varchar(32) NOT NULL
) engine = InnoDB;
create table t2 (
r_object_id char(16) NOT NULL,
i_position int(11) NOT NULL,
i_position int(11) NOT NULL,
users_names varchar(32) default NULL
) Engine = InnoDB;
create view v1 as select r_object_id, group_name from t1;
......@@ -2230,7 +2230,7 @@ insert into t1 values('120001a080000542','tstgroup1');
insert into t2 values('120001a080000542',-1, 'guser01');
insert into t2 values('120001a080000542',-2, 'guser02');
select v1.r_object_id, v2.users_names from v1, v2
where (v1.group_name='tstgroup1') and v2.r_object_id=v1.r_object_id
where (v1.group_name='tstgroup1') and v2.r_object_id=v1.r_object_id
order by users_names;
r_object_id users_names
120001a080000542 guser01
......@@ -2380,8 +2380,8 @@ create table t4 (x int, y int, z int);
create view v1 as
select t1.x
from (
(t1 join t2 on ((t1.y = t2.y)))
join
(t1 join t2 on ((t1.y = t2.y)))
join
(t3 left join t4 on (t3.y = t4.y) and (t3.z = t4.z))
);
prepare stmt1 from "select count(*) from v1 where x = ?";
......@@ -2557,12 +2557,12 @@ Warnings:
Warning 1052 Column 'x' in group statement is ambiguous
DROP VIEW v1;
DROP TABLE t1;
drop table if exists t1;
drop view if exists v1;
create table t1 (id int);
create view v1 as select * from t1;
drop table t1;
show create view v1;
drop table if exists t1;
drop view if exists v1;
create table t1 (id int);
create view v1 as select * from t1;
drop table t1;
show create view v1;
drop view v1;
//
View Create View character_set_client collation_connection
......@@ -2609,7 +2609,7 @@ DROP VIEW v2;
DROP TABLE t1, t2;
CREATE TABLE t1 (id int NOT NULL PRIMARY KEY,
td date DEFAULT NULL, KEY idx(td));
INSERT INTO t1 VALUES
INSERT INTO t1 VALUES
(1, '2005-01-01'), (2, '2005-01-02'), (3, '2005-01-02'),
(4, '2005-01-03'), (5, '2005-01-04'), (6, '2005-01-05'),
(7, '2005-01-05'), (8, '2005-01-05'), (9, '2005-01-06');
......@@ -2973,10 +2973,10 @@ drop view v1;
drop table t1;
CREATE TABLE t1(pk int PRIMARY KEY);
CREATE TABLE t2(pk int PRIMARY KEY, fk int, ver int, org int);
CREATE ALGORITHM=MERGE VIEW v1 AS
CREATE ALGORITHM=MERGE VIEW v1 AS
SELECT t1.*
FROM t1 JOIN t2
ON t2.fk = t1.pk AND
FROM t1 JOIN t2
ON t2.fk = t1.pk AND
t2.ver = (SELECT MAX(t.ver) FROM t2 t WHERE t.org = t2.org);
SHOW WARNINGS;
Level Code Message
......@@ -3306,7 +3306,7 @@ name char(10) NOT NULL
INSERT INTO t1 (lid, name) VALUES
(1, 'YES'), (2, 'NO');
CREATE TABLE t2 (
id int NOT NULL PRIMARY KEY,
id int NOT NULL PRIMARY KEY,
gid int NOT NULL,
lid int NOT NULL,
dt date
......@@ -3405,8 +3405,8 @@ CREATE TABLE t1 (id int);
CREATE TABLE t2 (id int, c int DEFAULT 0);
INSERT INTO t1 (id) VALUES (1);
INSERT INTO t2 (id) VALUES (1);
CREATE VIEW v1 AS
SELECT t2.c FROM t1, t2
CREATE VIEW v1 AS
SELECT t2.c FROM t1, t2
WHERE t1.id=t2.id AND 1 IN (SELECT id FROM t1) WITH CHECK OPTION;
UPDATE v1 SET c=1;
DROP VIEW v1;
......@@ -3514,7 +3514,7 @@ role_name varchar(100) default NULL,
app_name varchar(40) NOT NULL,
INDEX idx_app_name(app_name)
);
CREATE VIEW v1 AS
CREATE VIEW v1 AS
SELECT profile.person_id AS person_id
FROM t1 profile, t2 userrole, t3 role
WHERE userrole.person_id = profile.person_id AND
......@@ -3526,7 +3526,7 @@ INSERT INTO t1 VALUES
(-717462680,'ENTS Ta','0'), (-904346964,'ndard SQL\n','0');
INSERT INTO t2 VALUES
(1,3,6),(2,4,7),(3,5,8),(4,6,9),(5,1,6),(6,1,7),(7,1,8),(8,1,9),(9,1,10);
INSERT INTO t3 VALUES
INSERT INTO t3 VALUES
(1,'NUCANS_APP_USER','NUCANSAPP'),(2,'NUCANS_TRGAPP_USER','NUCANSAPP'),
(3,'IA_INTAKE_COORDINATOR','IACANS'),(4,'IA_SCREENER','IACANS'),
(5,'IA_SUPERVISOR','IACANS'),(6,'IA_READONLY','IACANS'),
......@@ -3552,7 +3552,7 @@ i
2
3
4
select table_name, is_updatable from information_schema.views
select table_name, is_updatable from information_schema.views
where table_name = 'v1';
table_name is_updatable
v1 NO
......@@ -3598,8 +3598,8 @@ DROP VIEW v2;
DROP VIEW v3;
DROP TABLE t1;
#
# Bug#29477: Not all fields of the target table were checked to have
# a default value when inserting into a view.
# Bug#29477 Not all fields of the target table were checked to have
# a default value when inserting into a view.
#
create table t1(f1 int, f2 int not null);
create view v1 as select f1 from t1;
......@@ -3616,7 +3616,7 @@ drop table t1;
create table t1 (a int, key(a));
create table t2 (c int);
create view v1 as select a b from t1;
create view v2 as select 1 a from t2, v1 where c in
create view v2 as select 1 a from t2, v1 where c in
(select 1 from t1 where b = a);
insert into t1 values (1), (1);
insert into t2 values (1), (1);
......@@ -3638,7 +3638,7 @@ MAX(a) COUNT(DISTINCT a)
DROP VIEW v1;
DROP TABLE t1;
# -----------------------------------------------------------------
# -- Bug#34337: Server crash when Altering a view using a table name.
# -- Bug#34337 Server crash when Altering a view using a table name.
# -----------------------------------------------------------------
DROP TABLE IF EXISTS t1;
......@@ -3655,8 +3655,8 @@ DROP TABLE t1;
# -- End of test case for Bug#34337.
# -----------------------------------------------------------------
# -- Bug#35193: VIEW query is rewritten without "FROM DUAL",
# -- causing syntax error
# -- Bug#35193 VIEW query is rewritten without "FROM DUAL",
# -- causing syntax error
# -----------------------------------------------------------------
CREATE VIEW v1 AS SELECT 1 FROM DUAL WHERE 1;
......@@ -3723,7 +3723,7 @@ DROP DATABASE `d-1`;
USE test;
#
# Bug#26676: VIEW using old table schema in a session.
# Bug#26676 VIEW using old table schema in a session.
#
DROP VIEW IF EXISTS v1;
......@@ -3765,7 +3765,7 @@ DROP TABLE t1;
# End of test case for Bug#26676.
# -----------------------------------------------------------------
# -- Bug#32538: View definition picks up character set, but not collation
# -- Bug#32538 View definition picks up character set, but not collation
# -----------------------------------------------------------------
DROP VIEW IF EXISTS v1;
......
mysql-test/r/view_grant.result
View file @ b63c7b2b
......@@ -646,7 +646,7 @@ CREATE DATABASE test2;
CREATE TABLE test1.t0 (a VARCHAR(20));
CREATE TABLE test2.t1 (a VARCHAR(20));
CREATE VIEW test2.t3 AS SELECT * FROM test1.t0;
CREATE OR REPLACE VIEW test.v1 AS
CREATE OR REPLACE VIEW test.v1 AS
SELECT ta.a AS col1, tb.a AS col2 FROM test2.t3 ta, test2.t1 tb;
DROP VIEW test.v1;
DROP VIEW test2.t3;
......@@ -790,7 +790,7 @@ v3 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VI
DROP USER u26813@localhost;
DROP DATABASE db26813;
#
# Bug#29908: A user can gain additional access through the ALTER VIEW.
# Bug#29908 A user can gain additional access through the ALTER VIEW.
#
CREATE DATABASE mysqltest_29908;
USE mysqltest_29908;
......@@ -1043,3 +1043,4 @@ DROP VIEW v1, v2;
DROP DATABASE mysqltest1;
DROP VIEW test.v3;
DROP USER mysqluser1@localhost;
USE test;
mysql-test/t/alter_table-big.test
View file @ b63c7b2b
......@@ -9,10 +9,9 @@
# in proper order.
--source include/have_binlog_format_mixed_or_statement.inc
#
# Test for bug #25044 "ALTER TABLE ... ENABLE KEYS acquires global
# 'opening tables' lock".
# Test for Bug#25044 ALTER TABLE ... ENABLE KEYS acquires global
# 'opening tables' lock
#
# ALTER TABLE ... ENABLE KEYS should not acquire LOCK_open mutex for
# the whole its duration as it prevents other queries from execution.
......@@ -56,6 +55,7 @@ show binlog events in 'master-bin.000001' from 106;
# Clean up
drop tables t1, t2;
disconnect addconroot;
--echo End of 5.0 tests
......@@ -76,6 +76,7 @@ create table t1 (i int);
reset master;
set session debug="+d,sleep_alter_before_main_binlog";
--send alter table t1 change i c char(10) default 'Test1';
connect (addconroot, localhost, root,,);
connection addconroot;
--sleep 2
insert into t1 values ();
......@@ -105,6 +106,7 @@ connection addconroot;
rename table t1 to t3;
connection default;
--reap
disconnect addconroot;
drop table t3;
set session debug="-d,sleep_alter_before_main_binlog";
......@@ -114,3 +116,4 @@ show binlog events in 'master-bin.000001' from 106;
--echo End of 5.1 tests
mysql-test/t/connect.test
View file @ b63c7b2b
......@@ -9,11 +9,14 @@
# of the log tables (which are CSV-based). By connect mysql; show tables;
--source include/have_csv.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1,t2;
--enable_warnings
#connect (con1,localhost,root,,"");
#show tables;
connect (con1,localhost,root,,mysql);
......@@ -22,12 +25,16 @@ connect (con2,localhost,root,,test);
show tables;
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,root,z,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,root,z,);
connection default;
disconnect con1;
disconnect con2;
grant ALL on *.* to test@localhost identified by "gambling";
grant ALL on *.* to test@127.0.0.1 identified by "gambling";
......@@ -39,20 +46,23 @@ show tables;
connect (con4,localhost,test,gambling,test);
show tables;
connection default;
disconnect con3;
disconnect con4;
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,"");
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,);
# check if old password version also works
update mysql.user set password=old_password("gambling2") where user=_binary"test";
flush privileges;
......@@ -61,55 +71,57 @@ connect (con10,localhost,test,gambling2,);
connect (con5,localhost,test,gambling2,mysql);
connection con5;
set password="";
--error 1372
--error ER_PASSWD_LENGTH
set password='gambling3';
set password=old_password('gambling3');
show tables;
connect (con6,localhost,test,gambling3,test);
show tables;
connection default;
disconnect con10;
disconnect con5;
disconnect con6;
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,);
# remove user 'test' so that other tests which may use 'test'
# do not depend on this test.
delete from mysql.user where user=_binary"test";
flush privileges;
#
# Bug#12517: Clear user variables and replication events before
# closing temp tables in thread cleanup.
# Bug#12517 Clear user variables and replication events before
# closing temp tables in thread cleanup.
connect (con7,localhost,root,,test);
connection con7;
let $connection_id= `select connection_id()`;
create table t1 (id integer not null auto_increment primary key);
create temporary table t2(id integer not null auto_increment primary key);
set @id := 1;
delete from t1 where id like @id;
disconnect con7;
--sleep 5
connection default;
disconnect con7;
# Wait till the session con7 is disconnected
let $wait_condition =
SELECT COUNT(*) = 0
FROM information_schema.processlist
WHERE id = '$connection_id';
--source include/wait_condition.inc
drop table t1;
--disconnect con1
--disconnect con2
--disconnect con3
--disconnect con4
--disconnect con5
--disconnect con6
--disconnect con10
--echo # ------------------------------------------------------------------
--echo # -- End of 4.1 tests
--echo # ------------------------------------------------------------------
......@@ -147,7 +159,7 @@ let $wait_condition =
--echo # -- Check that we allow exactly three user connections, no matter how
--echo # -- many threads are running.
--echo
--echo
--echo # -- Connecting (1)...
let $con_name = con_1;
let $con_user_name = mysqltest_u1;
......@@ -237,7 +249,7 @@ DROP USER mysqltest_u1@localhost;
###########################################################################
--echo # -- Bug#35074: max_used_connections is not correct.
--echo # -- Bug#35074: max_used_connections is not correct.
--echo
FLUSH STATUS;
......@@ -250,11 +262,7 @@ SHOW STATUS LIKE 'max_used_connections';
SET GLOBAL event_scheduler = ON;
--echo # -- Waiting for Event Scheduler to start...
let $wait_condition =
SELECT COUNT(*) = 1
FROM information_schema.processlist
WHERE user = 'event_scheduler';
--source include/wait_condition.inc
--source include/running_event_scheduler.inc
# NOTE: We should use a new connection here instead of reconnect in order to
# avoid races (we can not for sure when the connection being disconnected is
......@@ -278,11 +286,7 @@ SHOW STATUS LIKE 'max_used_connections';
SET GLOBAL event_scheduler = OFF;
--echo # -- Waiting for Event Scheduler to stop...
let $wait_condition =
SELECT COUNT(*) = 0
FROM information_schema.processlist
WHERE user = 'event_scheduler';
--source include/wait_condition.inc
--source include/no_running_events.inc
--echo
--echo # -- End of Bug#35074.
......@@ -291,3 +295,7 @@ let $wait_condition =
--echo # ------------------------------------------------------------------
--echo # -- End of 5.1 tests
--echo # ------------------------------------------------------------------
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/consistent_snapshot.test
View file @ b63c7b2b
-- source include/have_innodb.inc
--source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
--echo # Establish connection con1 (user=root)
connect (con1,localhost,root,,);
--echo # Establish connection con2 (user=root)
connect (con2,localhost,root,,);
### Test 1:
### - While a consistent snapshot transaction is executed,
### no external inserts should be visible to the transaction.
--echo # Switch to connection con1
connection con1;
create table t1 (a int) engine=innodb;
start transaction with consistent snapshot;
CREATE TABLE t1 (a INT) ENGINE=innodb;
START TRANSACTION WITH CONSISTENT SNAPSHOT;
--echo # Switch to connection con2
connection con2;
insert into t1 values(1);
INSERT INTO t1 VALUES(1);
--echo # Switch to connection con1
connection con1;
select * from t1; # if consistent snapshot was set as expected, we
SELECT * FROM t1; # if consistent snapshot was set as expected, we
# should see nothing.
commit;
COMMIT;
### Test 2:
### - For any non-consistent snapshot transaction, external
### committed inserts should be visible to the transaction.
delete from t1;
start transaction; # Now we omit WITH CONSISTENT SNAPSHOT
DELETE FROM t1;
START TRANSACTION; # Now we omit WITH CONSISTENT SNAPSHOT
--echo # Switch to connection con2
connection con2;
insert into t1 values(1);
INSERT INTO t1 VALUES(1);
--echo # Switch to connection con1
connection con1;
select * from t1; # if consistent snapshot was not set, as expected, we
SELECT * FROM t1; # if consistent snapshot was not set, as expected, we
# should see 1.
commit;
COMMIT;
drop table t1;
--echo # Switch to connection default + close connections con1 and con2
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
# End of 4.1 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/dirty_close.test
View file @ b63c7b2b
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (con1,localhost,root,,);
connect (con2,localhost,root,,);
connection con1;
......@@ -5,12 +9,19 @@ dirty_close con1;
connection con2;
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
create table t1 (n int);
insert into t1 values (1),(2),(3);
select * from t1;
drop table t1;
CREATE TABLE t1 (n INT);
INSERT INTO t1 VALUES (1),(2),(3);
SELECT * FROM t1;
DROP TABLE t1;
connection default;
disconnect con2;
# End of 4.1 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/flush_block_commit.test
View file @ b63c7b2b
......@@ -4,74 +4,106 @@
# This is intended to mimick how mysqldump and innobackup work.
# And it requires InnoDB
-- source include/have_innodb.inc
--source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--echo # Establish connection con1 (user=root)
connect (con1,localhost,root,,);
--echo # Establish connection con2 (user=root)
connect (con2,localhost,root,,);
--echo # Establish connection con3 (user=root)
connect (con3,localhost,root,,);
--echo # Switch to connection con1
connection con1;
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
create table t1 (a int) engine=innodb;
CREATE TABLE t1 (a INT) ENGINE=innodb;
# blocks COMMIT ?
begin;
insert into t1 values(1);
BEGIN;
INSERT INTO t1 VALUES(1);
--echo # Switch to connection con2
connection con2;
flush tables with read lock;
select * from t1;
FLUSH TABLES WITH READ LOCK;
SELECT * FROM t1;
--echo # Switch to connection con1
connection con1;
send commit; # blocked by con2
send COMMIT; # blocked by con2
sleep 1;
--echo # Switch to connection con2
connection con2;
select * from t1; # verify con1 was blocked and data did not move
unlock tables;
SELECT * FROM t1; # verify con1 was blocked and data did not move
UNLOCK TABLES;
--echo # Switch to connection con1
connection con1;
reap;
# No deadlock ?
--echo # Switch to connection con1
connection con1;
begin;
select * from t1 for update;
BEGIN;
SELECT * FROM t1 FOR UPDATE;
--echo # Switch to connection con2
connection con2;
begin;
send select * from t1 for update; # blocked by con1
BEGIN;
send SELECT * FROM t1 FOR UPDATE; # blocked by con1
sleep 1;
--echo # Switch to connection con3
connection con3;
send flush tables with read lock; # blocked by con2
send FLUSH TABLES WITH READ LOCK; # blocked by con2
--echo # Switch to connection con1
connection con1;
commit; # should not be blocked by con3
COMMIT; # should not be blocked by con3
--echo # Switch to connection con2
connection con2;
reap;
--echo # Switch to connection con3
connection con3;
reap;
unlock tables;
UNLOCK TABLES;
# BUG#6732 FLUSH TABLES WITH READ LOCK + COMMIT hangs later FLUSH TABLES
# WITH READ LOCK
# Bug#6732 FLUSH TABLES WITH READ LOCK + COMMIT hangs later FLUSH TABLES
# WITH READ LOCK
--echo # Switch to connection con2
connection con2;
commit; # unlock InnoDB row locks to allow insertions
COMMIT; # unlock InnoDB row locks to allow insertions
--echo # Switch to connection con1
connection con1;
begin;
insert into t1 values(10);
flush tables with read lock;
commit;
unlock tables;
BEGIN;
INSERT INTO t1 VALUES(10);
FLUSH TABLES WITH READ LOCK;
COMMIT;
UNLOCK TABLES;
--echo # Switch to connection con2
connection con2;
flush tables with read lock; # bug caused hang here
unlock tables;
FLUSH TABLES WITH READ LOCK; # bug caused hang here
UNLOCK TABLES;
# Bug#7358 SHOW CREATE DATABASE fails if open transaction
BEGIN;
SELECT * FROM t1;
SHOW CREATE DATABASE test;
# BUG#7358 SHOW CREATE DATABASE fails if open transaction
DROP TABLE t1;
begin;
select * from t1;
show create database test;
drop table t1;
# Cleanup
--echo # Switch to connection default and close connections con1, con2, con3
connection default;
disconnect con1;
disconnect con2;
disconnect con3;
# End of 4.1 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/flush_block_commit_notembedded.test
View file @ b63c7b2b
......@@ -3,32 +3,51 @@
# We verify that we did not introduce a deadlock.
# This is intended to mimick how mysqldump and innobackup work.
-- source include/have_log_bin.inc
--source include/have_log_bin.inc
# And it requires InnoDB
-- source include/have_log_bin.inc
-- source include/have_innodb.inc
--source include/have_log_bin.inc
--source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--echo # Establish connection con1 (user=root)
connect (con1,localhost,root,,);
--echo # Establish connection con2 (user=root)
connect (con2,localhost,root,,);
# FLUSH TABLES WITH READ LOCK should block writes to binlog too
--echo # Switch to connection con1
connection con1;
create table t1 (a int) engine=innodb;
reset master;
set autocommit=0;
insert t1 values (1);
CREATE TABLE t1 (a INT) ENGINE=innodb;
RESET MASTER;
SET AUTOCOMMIT=0;
INSERT t1 VALUES (1);
--echo # Switch to connection con2
connection con2;
flush tables with read lock;
show master status;
FLUSH TABLES WITH READ LOCK;
SHOW MASTER STATUS;
--echo # Switch to connection con1
connection con1;
send commit;
send COMMIT;
--echo # Switch to connection con2
connection con2;
sleep 1;
show master status;
unlock tables;
SHOW MASTER STATUS;
UNLOCK TABLES;
--echo # Switch to connection con1
connection con1;
reap;
drop table t1;
set autocommit=1;
DROP TABLE t1;
SET AUTOCOMMIT=1;
--echo # Switch to connection default and close connections con1 and con2
connection default;
disconnect con1;
disconnect con2;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/flush_read_lock_kill.test
View file @ b63c7b2b
......@@ -8,24 +8,27 @@
# won't test anything interesting).
# This also won't work with the embedded server test
-- source include/not_embedded.inc
--source include/not_embedded.inc
-- source include/have_debug.inc
--source include/have_debug.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# Disable concurrent inserts to avoid test failures when reading the
# connection id which was inserted into a table by another thread.
set @old_concurrent_insert= @@global.concurrent_insert;
set @@global.concurrent_insert= 0;
SET @old_concurrent_insert= @@global.concurrent_insert;
SET @@global.concurrent_insert= 0;
connect (con1,localhost,root,,);
connect (con2,localhost,root,,);
connection con1;
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
create table t1 (kill_id int);
insert into t1 values(connection_id());
CREATE TABLE t1 (kill_id INT);
INSERT INTO t1 VALUES(connection_id());
# Thanks to the parameter we passed to --debug, this FLUSH will
# block on a debug build running with our --debug=make_global... It
......@@ -33,11 +36,11 @@ insert into t1 values(connection_id());
# --debug) it will succeed immediately
connection con1;
send flush tables with read lock;
send FLUSH TABLES WITH READ LOCK;
# kill con1
connection con2;
select ((@id := kill_id) - kill_id) from t1;
SELECT ((@id := kill_id) - kill_id) FROM t1;
# Wait for the debug sync point, test won't run on non-debug
# builds anyway.
......@@ -47,7 +50,7 @@ let $wait_condition=
and info = "flush tables with read lock";
--source include/wait_condition.inc
kill connection @id;
KILL CONNECTION @id;
connection con1;
# On debug builds it will be error 1053 (killed); on non-debug, or
......@@ -58,8 +61,14 @@ connection con1;
reap;
connection con2;
drop table t1;
DROP TABLE t1;
connection default;
disconnect con2;
# Restore global concurrent_insert value
set @@global.concurrent_insert= @old_concurrent_insert;
SET @@global.concurrent_insert= @old_concurrent_insert;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/init_connect.test
View file @ b63c7b2b
......@@ -5,6 +5,9 @@
# should work with embedded server after mysqltest is fixed
--source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--source include/add_anonymous_users.inc
connect (con0,localhost,root,,);
......@@ -233,7 +236,8 @@ connect (con1,localhost,mysqltest1,,);
connection con1;
select * from t1;
connection con0;
connection default;
disconnect con0;
disconnect con1;
drop trigger trg1;
......@@ -244,3 +248,7 @@ set global init_connect="set @a='a\\0c'";
revoke all privileges, grant option from mysqltest1@localhost;
drop user mysqltest1@localhost;
drop table t1, t2;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/lock_multi.test
View file @ b63c7b2b
This diff is collapsed.
mysql-test/t/mysqlbinlog.test
View file @ b63c7b2b
......@@ -24,7 +24,7 @@ insert into t2 values ();
# set @a:=1
# insert into t2 values (@a);
# test for load data and load data distributed among the several
# test for load data and load data distributed among the several
# files (we need to fill up first binlog)
load data infile '../../std_data/words.dat' into table t1;
load data infile '../../std_data/words.dat' into table t1;
......@@ -109,7 +109,7 @@ select "--- --position --" as "";
--replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --read-from-remote-server --position=239 --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
# Bug#7853 (mysqlbinlog does not accept input from stdin)
# Bug#7853 mysqlbinlog does not accept input from stdin
--disable_query_log
select "--- reading stdin --" as "";
--enable_query_log
......@@ -123,7 +123,7 @@ select "--- reading stdin --" as "";
drop table t1,t2;
#
#BUG#14157: utf8 encoding in binlog without set character_set_client
# Bug#14157 utf8 encoding in binlog without set character_set_client
#
flush logs;
--write_file $MYSQLTEST_VARDIR/tmp/bug14157.sql
......@@ -136,8 +136,8 @@ EOF
--exec $MYSQL test < $MYSQLTEST_VARDIR/tmp/bug14157.sql
--remove_file $MYSQLTEST_VARDIR/tmp/bug14157.sql
# resulted binlog, parly consisting of multi-byte utf8 chars,
# must be digestable for both client and server. In 4.1 the client
# resulted binlog, parly consisting of multi-byte utf8 chars,
# must be digestable for both client and server. In 4.1 the client
# should use default-character-set same as the server.
flush logs;
--exec $MYSQL_BINLOG --short-form $MYSQLD_DATADIR/master-bin.000004 | $MYSQL
......@@ -164,7 +164,7 @@ select * from t5 order by c1;
drop table t5;
#
# Bug#20396 Bin Log does not get DELIMETER cmd - Recover StoredProc fails
# Bug#20396 Bin Log does not get DELIMETER cmd - Recover StoredProc fails
#
--disable_warnings
drop procedure if exists p1;
......@@ -180,7 +180,7 @@ delimiter ;//
flush logs;
call p1();
drop procedure p1;
--error ER_SP_DOES_NOT_EXIST
--error ER_SP_DOES_NOT_EXIST
call p1();
--replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
--exec $MYSQL_BINLOG --short-form $MYSQLD_DATADIR/master-bin.000008
......@@ -223,14 +223,14 @@ flush logs;
#
# Bug#28293 missed '#' sign in the hex dump when the dump length
# is divisible by 16.
# is divisible by 16.
#
CREATE TABLE t1 (c1 CHAR(10));
# we need this for getting fixed timestamps inside of this test
flush logs;
FLUSH LOGS;
INSERT INTO t1 VALUES ('0123456789');
flush logs;
FLUSH LOGS;
DROP TABLE t1;
# We create a table, patch, and load the output into it
......@@ -238,11 +238,11 @@ DROP TABLE t1;
# We can easily see if a 'Query' line is missing the '#' character
# as described in the original bug
--disable_query_log
CREATE TABLE patch (a blob);
--disable_query_log
CREATE TABLE patch (a BLOB);
--exec $MYSQL_BINLOG --hexdump --local-load=$MYSQLTEST_VARDIR/tmp/ $MYSQLD_DATADIR/master-bin.000012 > $MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat
eval LOAD DATA LOCAL INFILE '$MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat'
INTO TABLE patch FIELDS TERMINATED by '' LINES STARTING BY '#';
INTO TABLE patch FIELDS TERMINATED BY '' LINES STARTING BY '#';
--remove_file $MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat
--enable_query_log
......@@ -254,40 +254,42 @@ SELECT COUNT(*) AS `BUG#28293_expect_1` FROM patch WHERE a LIKE '%Query%';
DROP TABLE patch;
#
# Bug #29928: incorrect connection_id() restoring from mysqlbinlog out
# Bug#29928 incorrect connection_id() restoring from mysqlbinlog out
#
flush logs;
create table t1(a int);
insert into t1 values(connection_id());
let $a= `select a from t1`;
flush logs;
--exec $MYSQL_BINLOG $MYSQLD_DATADIR/master-bin.000014 > $MYSQLTEST_VARDIR/tmp/bug29928.sql
drop table t1;
connect (con1, localhost, root, , test);
FLUSH LOGS;
CREATE TABLE t1(a INT);
INSERT INTO t1 VALUES(connection_id());
let $a= `SELECT a FROM t1`;
FLUSH LOGS;
let $outfile= $MYSQLTEST_VARDIR/tmp/bug29928.sql;
--exec $MYSQL_BINLOG $MYSQLD_DATADIR/master-bin.000014 > $outfile
DROP TABLE t1;
connect (con1, localhost, root, , test);
connection con1;
--exec $MYSQL test < $MYSQLTEST_VARDIR/tmp/bug29928.sql
--remove_file $MYSQLTEST_VARDIR/tmp/bug29928.sql
let $b= `select a from t1`;
--exec $MYSQL test < $outfile
--remove_file $outfile
let $b= `SELECT a FROM t1`;
disconnect con1;
connection default;
let $c= `select $a=$b`;
let $c= `SELECT $a=$b`;
--echo $c
drop table t1;
DROP TABLE t1;
echo shell> mysqlbinlog std_data/corrupt-relay-bin.000624 > var/tmp/bug31793.sql;
error 1;
exec $MYSQL_BINLOG $MYSQL_TEST_DIR/std_data/corrupt-relay-bin.000624 > $MYSQLTEST_VARDIR/tmp/bug31793.sql;
--remove_file $MYSQLTEST_VARDIR/tmp/bug31793.sql
#
# Test --disable-force-if-open and --force-if-open
#
flush logs;
FLUSH LOGS;
--error 1
--exec $MYSQL_BINLOG $MYSQLD_DATADIR/master-bin.000016 >/dev/null 2>/dev/null
--exec $MYSQL_BINLOG --force-if-open $MYSQLD_DATADIR/master-bin.000016 >/dev/null 2>/dev/null
--echo BUG#31611: Security risk with BINLOG statement
--echo Bug#31611 Security risk with BINLOG statement
SET BINLOG_FORMAT=ROW;
CREATE DATABASE mysqltest1;
......@@ -306,6 +308,7 @@ connect (unsecure,localhost,untrusted,,mysqltest1);
echo mysql mysqltest1 -uuntrusted < var/tmp/bug31611.sql;
error 1;
exec $MYSQL mysqltest1 -uuntrusted < $MYSQLTEST_VARDIR/tmp/bug31611.sql;
--remove_file $MYSQLTEST_VARDIR/tmp/bug31611.sql
connection unsecure;
error ER_TABLEACCESS_DENIED_ERROR;
INSERT INTO t1 VALUES (1,USER());
......@@ -315,7 +318,7 @@ connection default;
DROP DATABASE mysqltest1;
DROP USER untrusted@localhost;
--echo BUG#32580: mysqlbinlog cannot read binlog event with user variables
--echo Bug#32580 mysqlbinlog cannot read binlog event with user variables
# Testing that various kinds of events can be read and restored properly.
......@@ -343,24 +346,25 @@ query_vertical SELECT * FROM t1;
DROP TABLE t1;
#
# Bug #37313 BINLOG Contains Incorrect server id
# Bug#37313 BINLOG Contains Incorrect server id
#
let $save_server_id= `select @@global.server_id`;
let $s_id_max=`select (1 << 32) - 1`;
eval set @@global.server_id= $s_id_max;
let $binlog_file= $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog;
let $save_server_id= `SELECT @@global.server_id`;
let $s_id_max= `SELECT (1 << 32) - 1`;
eval SET @@global.server_id= $s_id_max;
reset master;
flush logs;
--exec $MYSQL_BINLOG $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog
RESET MASTER;
FLUSH LOGS;
--exec $MYSQL_BINLOG $MYSQLD_DATADIR/master-bin.000001 > $binlog_file
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
eval select
(@a:=load_file("$MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
is not null;
let $s_id_unsigned= `select @a like "%server id $s_id_max%" /* must return 1 */`;
eval SELECT
(@a:=LOAD_FILE("$binlog_file"))
IS NOT NULL;
let $s_id_unsigned= `SELECT @a LIKE "%server id $s_id_max%" /* must return 1 */`;
echo *** Unsigned server_id $s_id_max is found: $s_id_unsigned ***;
eval set @@global.server_id= $save_server_id;
--remove_file $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog
eval SET @@global.server_id= $save_server_id;
--remove_file $binlog_file
--echo End of 5.1 tests
mysql-test/t/mysqltest.test
View file @ b63c7b2b
......@@ -6,6 +6,9 @@
# This test uses chmod, can't be run with root permissions
-- source include/not_as_root.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# ============================================================================
#
# Test of mysqltest itself
......@@ -50,7 +53,7 @@ select otto from (select 1 as otto) as t1;
# ----------------------------------------------------------------------------
# Negative case(statement):
# The derived table t1 does not contain a column named 'friedrich' .
# The derived table t1 does not contain a column named 'friedrich' .
# --> ERROR 42S22: Unknown column 'friedrich' in 'field list and
# --> 1054: Unknown column 'friedrich' in 'field list'
# ----------------------------------------------------------------------------
......@@ -121,7 +124,7 @@ select friedrich from (select 1 as otto) as t1;
# $mysql_errno is a builtin variable of mysqltest and contains the return code
# of the last command sent to the server.
#
# The following test cases often initialize $mysql_errno to 1064 by
# The following test cases often initialize $mysql_errno to 1064 by
# a command with wrong syntax.
# Example: --error 1064 To prevent the abort after the error.
# garbage ;
......@@ -485,7 +488,7 @@ remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
# Allow trailing # comment
--sleep 1 # Wait for insert delayed to be executed.
--sleep 1 # Wait for insert delayed to be executed.
--sleep 1 # Wait for insert delayed to be executed.
# ----------------------------------------------------------------------------
# Test error
......@@ -707,7 +710,7 @@ echo Not a banana: $cat;
--error 1
--exec echo "let hi;" | $MYSQL_TEST 2>&1
# More advanced test for bug#17280
# More advanced test for Bug#17280
let $success= 1;
--echo # Execute: --echo # <whatever> success: \$success
--echo # <whatever> success: $success
......@@ -1386,12 +1389,12 @@ connection default;
# ----------------------------------------------------------------------------
# TODO Test queries, especially their errormessages... so it's easy to debug
# TODO Test queries, especially their errormessages... so it's easy to debug
# new scripts and diagnose errors
# ----------------------------------------------------------------------------
# ----------------------------------------------------------------------------
# Test bug#12386
# Test Bug#12386
# ----------------------------------------------------------------------------
let $num= 2;
while ($num)
......@@ -1407,7 +1410,7 @@ SELECT 1 as a;
#
# Bug #10251: Identifiers containing quotes not handled correctly
# Bug#10251 Identifiers containing quotes not handled correctly
#
select 1 as `a'b`, 2 as `a"b`;
......@@ -1428,7 +1431,7 @@ let $message= `SELECT USER()`;
# The message contains more then 80 characters on multiple lines
# and is kept between double quotes.
let $message=
let $message=
"Here comes a very very long message that
- is longer then 80 characters and
- consists of several lines";
......@@ -1465,6 +1468,8 @@ remove_file $MYSQLTEST_VARDIR/tmp/zero_length_file.result;
--error 0,1
remove_file $MYSQLTEST_VARDIR/tmp/zero_length_file.reject;
--error 0,1
remove_file $MYSQLTEST_VARDIR/tmp/zero_length_file.log;
--error 0,1
remove_file $MYSQL_TEST_DIR/r/zero_length_file.reject;
#
......@@ -1487,8 +1492,8 @@ remove_file $MYSQLTEST_VARDIR/tmp/query.sql;
#--exec $MYSQL_TEST -x $MYSQLTEST_VARDIR/tmp/query.sql -R $MYSQLTEST_VARDIR/tmp/result_file.result 2>&1
#
# Bug #11731 mysqltest in multi-statement queries ignores errors in
# non-1st queries
# Bug#11731 mysqltest in multi-statement queries ignores errors in
# non-1st queries
#
echo Failing multi statement query;
......@@ -1539,7 +1544,7 @@ remove_file $MYSQLTEST_VARDIR/log/bug11731.log;
remove_file $MYSQLTEST_VARDIR/tmp/bug11731.sql;
#
# Bug#19890 mysqltest: "query" command is broken
# Bug#19890 mysqltest "query" command is broken
#
# It should be possible to use the command "query" to force mysqltest to
......@@ -1565,7 +1570,7 @@ select "at" as col1, "c" as col2;
select "at" as col1, "AT" as col2, "c" as col3;
--replace_regex /a/b/ /ct/d/
select "a" as col1, "ct" as col2;
select "a" as col1, "ct" as col2;
--replace_regex /(strawberry)/raspberry and \1/ /blueberry/blackberry/ /potato/tomato/;
select "strawberry","blueberry","potato";
......@@ -1583,7 +1588,7 @@ select "strawberry","blueberry","potato";
--error 1
--exec echo "--replace_regex /a b c" | $MYSQL_TEST 2>&1
--error 1
--exec echo "replace_regex /a /b c ;" | $MYSQL_TEST 2>&1
--exec echo "replace_regex /a /b c ;" | $MYSQL_TEST 2>&1
# REQUIREMENT
# replace_regex should replace substitutions from left to right in output
......@@ -1954,7 +1959,7 @@ SELECT '2' as "my_col1",2 as "my_col2"
UNION
SELECT '1',1 from t2;
# 9. Ensure that several result formatting options including "sorted_result"
# 9. Ensure that several result formatting options including "sorted_result"
# - have all an effect
# - "--sorted_result" does not need to be direct before the statement
# - Row sorting is applied after modification of the column content
......@@ -2170,15 +2175,15 @@ remove_file $MYSQLTEST_VARDIR/tmp/testdir/file3.txt;
rmdir $MYSQLTEST_VARDIR/tmp/testdir;
#
# Bug #36041: mysql-test-run doesn't seem to string match 100% effectively
# on Windows
# Bug#36041 mysql-test-run doesn't seem to string match 100% effectively
# on Windows
#
--replace_result c:\\a.txt z
SELECT 'c:\\a.txt' AS col;
#
# Bug #32307 mysqltest - does not detect illegal if syntax
# Bug#32307 mysqltest - does not detect illegal if syntax
#
let $test= 1;
......@@ -2212,12 +2217,14 @@ select 1;
# ----------------------------------------------------------------------------
# BUG#35701: please allow test language variables in connection and sync_slave_with_master
# BUG#35701 please allow test language variables in connection and sync_slave_with_master
# Test that "connection $variable" works and that $CURRENT_CONNECTION has the right value.
# ----------------------------------------------------------------------------
connect (con1,localhost,root,,);
--echo $CURRENT_CONNECTION
connect (con2,localhost,root,,);
--echo $CURRENT_CONNECTION
connection default;
--echo $CURRENT_CONNECTION
......@@ -2225,8 +2232,11 @@ connection default;
connection con1;
--echo $CURRENT_CONNECTION
let $x= default;
let $y= con1;
connection con2;
--echo $CURRENT_CONNECTION
let $x= con1;
let $y= con2;
connection $x;
--echo $CURRENT_CONNECTION
......@@ -2245,3 +2255,6 @@ disconnect $y;
--echo End of tests
connection default;
# Wait till we reached the initial number of concurrent sessions
--source include/wait_until_count_sessions.inc
mysql-test/t/read_only.test
View file @ b63c7b2b
......@@ -3,10 +3,12 @@
# should work with embedded server after mysqltest is fixed
--source include/not_embedded.inc
--source include/count_sessions.inc
set @start_read_only= @@global.read_only;
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
DROP TABLE IF EXISTS t1,t2,t3;
--enable_warnings
......@@ -110,7 +112,7 @@ drop table t1;
insert into t1 values(1);
#
# BUG#11733: COMMITs should not happen if read-only is set
# Bug#11733 COMMITs should not happen if read-only is set
#
# LOCK TABLE ... WRITE / READ_ONLY
......@@ -238,8 +240,9 @@ set global read_only=1;
connection default;
select @@global.read_only;
unlock tables;
disconnect root2;
# BUG #22077 "DROP TEMPORARY TABLE fails with wrong error if read_only is set"
# Bug#22077 DROP TEMPORARY TABLE fails with wrong error if read_only is set
#
# check if DROP TEMPORARY on a non-existing temporary table returns the right
# error
......@@ -256,10 +259,12 @@ drop temporary table if exists ttt;
--echo connection default;
connection default;
set global read_only=0;
disconnect con1;
drop table t1,t2;
drop user test@localhost;
--echo #
--echo # Bug #27440 read_only allows create and drop database
--echo # Bug#27440 read_only allows create and drop database
--echo #
set global read_only= 1;
--disable_warnings
......@@ -297,7 +302,7 @@ delete from mysql.columns_priv where User like 'mysqltest_%';
flush privileges;
drop database mysqltest_db1;
set global read_only= @start_read_only;
disconnect con1;
disconnect root2;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/show_check.test
View file @ b63c7b2b
......@@ -5,6 +5,9 @@
# depends on the presence of the log tables (which are CSV-based).
--source include/have_csv.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
#
# Test of some show commands
#
......@@ -195,7 +198,7 @@ show columns from t1;
drop table t1;
#
# Test for Bug #2593 "SHOW CREATE TABLE doesn't properly double quotes"
# Test for Bug#2593 SHOW CREATE TABLE doesn't properly double quotes
#
SET @old_sql_mode= @@sql_mode, sql_mode= '';
......@@ -223,7 +226,7 @@ CREATE TABLE """a" (i INT);
SHOW CREATE TABLE """a";
DROP TABLE """a";
#Bug #4374 SHOW TABLE STATUS FROM ignores collation_connection
# Bug#4374 SHOW TABLE STATUS FROM ignores collation_connection
#set names latin1;
#create database ``;
#create table ``.`` (a int) engine=heap;
......@@ -248,7 +251,7 @@ SET sql_quote_show_create= @old_sql_quote_show_create;
SET sql_mode= @old_sql_mode;
#
# Test for bug #2719 "Heap tables status shows wrong or missing data."
# Test for Bug#2719 Heap tables status shows wrong or missing data.
#
select @@max_heap_table_size;
......@@ -309,7 +312,7 @@ show table status;
drop table t1, t2, t3;
#
# Test for bug #3342 SHOW CREATE DATABASE seems to require DROP privilege
# Test for Bug#3342 SHOW CREATE DATABASE seems to require DROP privilege
#
create database mysqltest;
......@@ -324,35 +327,38 @@ connect (con1,localhost,mysqltest_1,,mysqltest);
connection con1;
select * from t1;
show create database mysqltest;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
drop table t1;
--error 1044
--error ER_DBACCESS_DENIED_ERROR
drop database mysqltest;
disconnect con1;
connect (con2,localhost,mysqltest_2,,test);
connection con2;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
select * from mysqltest.t1;
--error 1044
--error ER_DBACCESS_DENIED_ERROR
show create database mysqltest;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
drop table mysqltest.t1;
--error 1044
--error ER_DBACCESS_DENIED_ERROR
drop database mysqltest;
disconnect con2;
connect (con3,localhost,mysqltest_3,,test);
connection con3;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
select * from mysqltest.t1;
show create database mysqltest;
drop table mysqltest.t1;
drop database mysqltest;
disconnect con3;
connection default;
set names binary;
delete from mysql.user
delete from mysql.user
where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
delete from mysql.db
delete from mysql.db
where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
flush privileges;
......@@ -366,7 +372,7 @@ flush privileges;
#drop database ``;
# Test that USING <keytype> is always shown in SHOW CREATE TABLE when it was
# specified during table creation, but not otherwise. (Bug #7235)
# specified during table creation, but not otherwise. (Bug#7235)
CREATE TABLE t1 (i int, KEY (i)) ENGINE=MEMORY;
SHOW CREATE TABLE t1;
DROP TABLE t1;
......@@ -397,7 +403,7 @@ ALTER TABLE t1 ENGINE=MEMORY;
SHOW CREATE TABLE t1;
DROP TABLE t1;
# Test for BUG#9439 "Reporting wrong datatype for sub_part on show index"
# Test for Bug#9439 Reporting wrong datatype for sub_part on show index
CREATE TABLE t1(
field1 text NOT NULL,
PRIMARY KEY(field1(1000))
......@@ -407,7 +413,7 @@ show index from t1;
--disable_metadata
drop table t1;
# Test for BUG#11635: mysqldump exports TYPE instead of USING for HASH
# Test for Bug#11635 mysqldump exports TYPE instead of USING for HASH
create table t1 (
c1 int NOT NULL,
c2 int NOT NULL,
......@@ -417,7 +423,7 @@ create table t1 (
SHOW CREATE TABLE t1;
DROP TABLE t1;
# Test for BUG#93: 4.1 protocl crash on corupted frm and SHOW TABLE STATUS
# Test for Bug#93 4.1 protocl crash on corupted frm and SHOW TABLE STATUS
flush tables;
......@@ -426,19 +432,19 @@ let $MYSQLD_DATADIR= `select @@datadir`;
system echo "this is a junk file for test" >> $MYSQLD_DATADIR/test/t1.frm ;
--replace_column 6 # 7 # 8 # 9 #
SHOW TABLE STATUS like 't1';
--error 1033
--error ER_NOT_FORM_FILE
show create table t1;
drop table if exists t1;
--error 1,0
--remove_file $MYSQLD_DATADIR/test/t1.frm
#
# BUG 12183 - SHOW OPEN TABLES behavior doesn't match grammar
# Bug#12183 SHOW OPEN TABLES behavior doesn't match grammar
# First we close all open tables with FLUSH tables and then we open some.
#
--echo
--echo # Bug#12183: SHOW OPEN TABLES behavior doesn't match grammar.
--echo # Bug#12183 SHOW OPEN TABLES behavior doesn't match grammar.
--echo
# NOTE: SHOW OPEN TABLES does not sort result list by database or table names.
......@@ -497,15 +503,15 @@ use test;
--echo
#
# BUG #12591 (SHOW TABLES FROM dbname produces wrong error message)
# Bug#12591 SHOW TABLES FROM dbname produces wrong error message
#
--error 1049
--error ER_BAD_DB_ERROR
SHOW TABLES FROM non_existing_database;
--echo End of 4.1 tests
#
# Bug#17203: "sql_no_cache sql_cache" in views created from prepared
# Bug#17203 "sql_no_cache sql_cache" in views created from prepared
# statement
#
# The problem was that initial user setting was forgotten, and current
......@@ -585,7 +591,7 @@ SHOW COLUMNS FROM no_such_table;
#
# Bug #19764: SHOW commands end up in the slow log as table scans
# Bug#19764 SHOW commands end up in the slow log as table scans
#
flush status;
show status like 'slow_queries';
......@@ -597,7 +603,7 @@ select 1 from information_schema.tables limit 1;
show status like 'slow_queries';
create table t1 (a int);
create trigger tr1 before insert on t1 for each row
create trigger tr1 before insert on t1 for each row
begin
end;
create view v1 as select a from t1;
......@@ -657,9 +663,10 @@ drop table t1;
drop procedure p1;
drop function f1;
drop event e1;
#
# BUG#10491: Server returns data as charset binary SHOW CREATE TABLE or SELECT
# FROM I_S.
# Bug#10491 Server returns data as charset binary SHOW CREATE TABLE or SELECT
# FROM I_S.
#
#
......@@ -774,7 +781,7 @@ SHOW TRIGGERS LIKE 't1';
--echo ----------------------------------------------------------------
SELECT
SELECT
TRIGGER_CATALOG,
TRIGGER_SCHEMA,
TRIGGER_NAME,
......@@ -930,7 +937,7 @@ DROP DATABASE mysqltest1;
use test;
#
# Bug #28808: log_queries_not_using_indexes variable dynamic change is ignored
# Bug#28808 log_queries_not_using_indexes variable dynamic change is ignored
#
flush status;
show variables like "log_queries_not_using_indexes";
......@@ -946,7 +953,7 @@ select 1 from information_schema.tables limit 1;
show status like 'slow_queries';
#
# Bug #30088: Can't disable myisam-recover by a value of ""
# Bug#30088 Can't disable myisam-recover by a value of ""
#
show variables like 'myisam_recover_options';
......@@ -977,7 +984,8 @@ SHOW AUTHORS;
--enable_result_log
#
# Test for bug #9785 SELECT privilege for the whole database is needed to do SHOW CREATE DATABASE
# Bug#9785 SELECT privilege for the whole database is needed to do
# SHOW CREATE DATABASE
#
create database mysqltest;
show create database mysqltest;
......@@ -993,6 +1001,8 @@ delete from mysql.db where user='mysqltest_4';
delete from mysql.tables_priv where user='mysqltest_4';
flush privileges;
drop database mysqltest;
connection default;
disconnect con4;
#
# Ensure that show plugin code is tested
......@@ -1008,8 +1018,8 @@ show plugins;
--enable_result_log
#
# Bug #19874: SHOW COLUMNS and SHOW KEYS handle identifiers containing
# \ incorrectly
# Bug#19874 SHOW COLUMNS and SHOW KEYS handle identifiers containing
# \ incorrectly
#
create database `mysqlttest\1`;
create table `mysqlttest\1`.`a\b` (a int);
......@@ -1021,7 +1031,7 @@ drop table `mysqlttest\1`.`a\b`;
drop database `mysqlttest\1`;
#
# Bug#24392: SHOW ENGINE MUTEX STATUS is a synonym for SHOW INNODB STATUS
# Bug#24392 SHOW ENGINE MUTEX STATUS is a synonym for SHOW INNODB STATUS
#
--error ER_UNKNOWN_STORAGE_ENGINE
......@@ -1107,8 +1117,8 @@ DROP PROCEDURE p1;
DEALLOCATE PREPARE stmt1;
#
# BUG#10491: Server returns data as charset binary SHOW CREATE TABLE or SELECT
# FROM INFORMATION_SCHEMA.
# Bug#10491 Server returns data as charset binary SHOW CREATE TABLE or SELECT
# FROM INFORMATION_SCHEMA.
#
# Before the change performed to fix the bug, the metadata of the output of
# SHOW CREATE statements would always describe the result as 'binary'. That
......@@ -1171,17 +1181,17 @@ DROP TABLE t1;
DROP EVENT ev1;
#
# Bug #30036: SHOW TABLE TYPES causes the debug client to crash
# Bug#30036 SHOW TABLE TYPES causes the debug client to crash
#
--disable_result_log
SHOW TABLE TYPES;
--enable_result_log
#
# Bug #32710: SHOW INNODB STATUS requires SUPER
# Bug#32710 SHOW INNODB STATUS requires SUPER
#
CREATE USER test_u@localhost;
GRANT PROCESS ON *.* TO test_u@localhost;
......@@ -1198,3 +1208,7 @@ DROP USER test_u@localhost;
--echo End of 5.1 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/skip_name_resolve.test
View file @ b63c7b2b
# Can't be tested with embedded server
-- source include/not_embedded.inc
--source include/not_embedded.inc
# Bug #8471: IP address with mask fail when skip-name-resolve is on
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# Bug#8471 IP address with mask fail when skip-name-resolve is on
GRANT ALL ON test.* TO mysqltest_1@'127.0.0.1/255.255.255.255';
SHOW GRANTS FOR mysqltest_1@'127.0.0.1/255.255.255.255';
REVOKE ALL ON test.* FROM mysqltest_1@'127.0.0.1/255.255.255.255';
......@@ -9,15 +12,20 @@ DROP USER mysqltest_1@'127.0.0.1/255.255.255.255';
# End of 4.1 tests
# Bug #13407 "Remote connecting crashes server".
# Bug#13407 Remote connecting crashes server
# Server crashed when one used USER() function in connection for which
# was impossible to obtain peer hostname.
connect (con1, 127.0.0.1, root, , test, $MASTER_MYPORT, );
--replace_column 1 #
select user();
SELECT USER();
# We are only interested in the fact that statement below doesn't
# crash server.
--disable_result_log
show processlist;
SHOW PROCESSLIST;
--enable_result_log
connection default;
disconnect con1;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/sp-security.test
View file @ b63c7b2b
......@@ -5,6 +5,9 @@
# Can't test with embedded server that doesn't support grants
-- source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (con1root,localhost,root,,);
connection con1root;
......@@ -156,7 +159,7 @@ call db1_secret.stamp(6);
select db1_secret.db();
#
# BUG#2777
# Bug#2777 Stored procedure doesn't observe definer's rights
#
connection con1root;
......@@ -215,7 +218,7 @@ call q();
select * from t2;
#
# BUG#6030: Stored procedure has no appropriate DROP privilege
# Bug#6030 Stored procedure has no appropriate DROP privilege
# (or ALTER for that matter)
# still connection con2user1 in db2
......@@ -330,7 +333,7 @@ flush privileges;
drop table t1;
#
# BUG#9503: reseting correct parameters of thread after error in SP function
# Bug#9503 reseting correct parameters of thread after error in SP function
#
connect (root,localhost,root,,test);
connection root;
......@@ -366,10 +369,12 @@ REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1@localhost;
drop function bug_9503;
use test;
drop database mysqltest;
connection default;
disconnect root;
#
# correct value from current_user() in function run from "security definer"
# (BUG#7291)
# (Bug#7291 Stored procedures: wrong CURRENT_USER value)
#
connection con1root;
use test;
......@@ -398,10 +403,10 @@ REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1@localhost;
drop user user1@localhost;
#
# Bug #12318: Wrong error message when accessing an inaccessible stored
# Bug#12318 Wrong error message when accessing an inaccessible stored
# procedure in another database when the current database is
# information_schema.
#
#
--disable_warnings
drop database if exists mysqltest_1;
......@@ -438,7 +443,7 @@ revoke usage on *.* from mysqltest_1@localhost;
drop user mysqltest_1@localhost;
#
# BUG#12812 create view calling a function works without execute right
# Bug#12812 create view calling a function works without execute right
# on function
delimiter |;
--disable_warnings
......@@ -464,7 +469,7 @@ delimiter ;|
#
# BUG#14834: Server denies to execute Stored Procedure
# Bug#14834 Server denies to execute Stored Procedure
#
# The problem here was with '_' in the database name.
#
......@@ -507,7 +512,7 @@ drop database db_bug14834;
#
# BUG#14533: 'desc tbl' in stored procedure causes error
# Bug#14533 'desc tbl' in stored procedure causes error
# ER_TABLEACCESS_DENIED_ERROR
#
create database db_bug14533;
......@@ -546,7 +551,7 @@ drop database db_bug14533;
#
# WL#2897: Complete definer support in the stored routines.
# WL#2897 Complete definer support in the stored routines.
#
# The following cases are tested:
# 1. check that if DEFINER-clause is not explicitly specified, stored routines
......@@ -591,7 +596,7 @@ GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE wl2897_p1() SELECT 1;
......@@ -603,7 +608,7 @@ CREATE FUNCTION wl2897_f1() RETURNS INT RETURN 1;
--echo ---> connection: mysqltest_1_con
--connection mysqltest_1_con
use mysqltest;
USE mysqltest;
--error ER_SPECIFIC_ACCESS_DENIED_ERROR
CREATE DEFINER=root@localhost PROCEDURE wl2897_p2() SELECT 2;
......@@ -629,7 +634,7 @@ CREATE DEFINER='a @ b @ c'@localhost FUNCTION wl2897_f3() RETURNS INT RETURN 3;
--echo ---> connection: con1root
--connection con1root
use mysqltest;
USE mysqltest;
SHOW CREATE PROCEDURE wl2897_p1;
SHOW CREATE PROCEDURE wl2897_p3;
......@@ -649,7 +654,7 @@ DROP DATABASE mysqltest;
#
# BUG#13198: SP executes if definer does not exist
# Bug#13198 SP executes if definer does not exist
#
# Prepare environment.
......@@ -679,7 +684,7 @@ GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
--echo ---> connection: mysqltest_1_con
--connection mysqltest_1_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE bug13198_p1()
SELECT 1;
......@@ -697,7 +702,7 @@ SELECT bug13198_f1();
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use mysqltest;
USE mysqltest;
CALL bug13198_p1();
......@@ -719,7 +724,7 @@ DROP USER mysqltest_1@localhost;
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use mysqltest;
USE mysqltest;
--error ER_NO_SUCH_USER
CALL bug13198_p1();
......@@ -740,8 +745,8 @@ DROP USER mysqltest_2@localhost;
DROP DATABASE mysqltest;
#
# Bug#19857 - When a user with CREATE ROUTINE priv creates a routine,
# it results in NULL p/w
# Bug#19857 When a user with CREATE ROUTINE priv creates a routine,
# it results in NULL p/w
#
# Can't test with embedded server that doesn't support grants
......@@ -756,7 +761,7 @@ SELECT Host,User,Password FROM mysql.user WHERE User='user19857';
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use test;
USE test;
DELIMITER //;
CREATE PROCEDURE sp19857() DETERMINISTIC
......@@ -790,8 +795,7 @@ DROP USER user19857@localhost;
use test;
#
# BUG#18630: Arguments of suid routine calculated in wrong security
# context
# Bug#18630 Arguments of suid routine calculated in wrong security context
#
# Arguments of suid routines were calculated in definer's security
# context instead of caller's context thus creating security hole.
......@@ -862,3 +866,7 @@ DROP FUNCTION f_suid;
DROP TABLE t1;
--echo End of 5.0 tests.
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/sp_notembedded.test
View file @ b63c7b2b
......@@ -4,13 +4,17 @@
set @old_concurrent_insert= @@global.concurrent_insert;
set @@global.concurrent_insert= 0;
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1,t3;
--enable_warnings
delimiter |;
#
# BUG#4902: Stored procedure with SHOW WARNINGS leads to packet error
# Bug#4902 Stored procedure with SHOW WARNINGS leads to packet error
#
# Added tests for show grants command
--disable_warnings
......@@ -52,15 +56,14 @@ show warnings|
drop procedure bug4902_2|
#
# BUG#3583: query cache doesn't work for stored procedures
# Bug#3583 query cache doesn't work for stored procedures
#
--disable_warnings
drop table if exists t1|
--enable_warnings
create table t1 (
id char(16) not null default '',
data int not null
id char(16) not null default '',
data int not null
)|
--disable_warnings
drop procedure if exists bug3583|
......@@ -97,8 +100,9 @@ delete from t1|
drop procedure bug3583|
drop table t1|
#
# BUG#6807: Stored procedure crash if CREATE PROCEDURE ... KILL QUERY
# Bug#6807 Stored procedure crash if CREATE PROCEDURE ... KILL QUERY
#
--disable_warnings
drop procedure if exists bug6807|
......@@ -112,16 +116,16 @@ begin
select 'Not reached';
end|
--error 1317
--error ER_QUERY_INTERRUPTED
call bug6807()|
--error 1317
--error ER_QUERY_INTERRUPTED
call bug6807()|
drop procedure bug6807|
#
# BUG#10100: function (and stored procedure?) recursivity problem
# Bug#10100 function (and stored procedure?) recursivity problem
#
--disable_warnings
drop function if exists bug10100f|
......@@ -220,11 +224,11 @@ begin
close c;
end|
#end of the stack checking
# end of the stack checking
set @@max_sp_recursion_depth=255|
set @var=1|
#disable log because error about stack overrun contains numbers which
#depend on a system
# disable log because error about stack overrun contains numbers which
# depend on a system
-- disable_result_log
-- error ER_STACK_OVERRUN_NEED_MORE
call bug10100p(255, @var)|
......@@ -253,6 +257,7 @@ drop table t3|
delimiter ;|
#
# Bug#15298 SHOW GRANTS FOR CURRENT_USER: Incorrect output in DEFINER context
#
......@@ -269,6 +274,7 @@ call 15298_1();
call 15298_2();
connection default;
disconnect con1;
drop user mysqltest_1@localhost;
drop procedure 15298_1;
drop procedure 15298_2;
......@@ -334,6 +340,7 @@ connection default;
disconnect rl_holder;
disconnect rl_acquirer;
disconnect rl_wait;
disconnect rl_contender;
drop procedure p1;
drop table t1;
set session low_priority_updates=default;
......@@ -343,3 +350,7 @@ set session low_priority_updates=default;
#
set @@global.concurrent_insert= @old_concurrent_insert;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/ssl-big.test
View file @ b63c7b2b
......@@ -4,12 +4,15 @@
-- source include/have_ssl.inc
-- source include/big_test.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
DROP TABLE IF EXISTS t1, t2;
--enable_warnings
#
# Bug #29579 Clients using SSL can hang the server
# Bug#29579 Clients using SSL can hang the server
#
connect (ssl_con,localhost,root,,,,,SSL);
......@@ -18,7 +21,7 @@ create table t1 (a int);
disconnect ssl_con;
--disable_query_log
--disable_result_log
......@@ -26,31 +29,36 @@ let $count= 2000;
while ($count)
{
connect (ssl_con,localhost,root,,,,,SSL);
eval insert into t1 values ($count);
dec $count;
# This select causes the net buffer to fill as the server sends the results
# This select causes the net buffer to fill as the server sends the results
# but the client doesn't reap the results. The results are larger each time
# through the loop, so that eventually the buffer is completely full
# at the exact moment the server attempts to the close the connection with
# the lock held.
send select * from t1;
# now send the quit the command so the server will initiate the shutdown.
send_quit ssl_con;
send_quit ssl_con;
# if the server is hung, this will hang too:
connect (ssl_con2,localhost,root,,,,,SSL);
# no hang if we get here, close and retry
disconnect ssl_con2;
disconnect ssl_con;
}
}
--enable_query_log
--enable_result_log
connect (ssl_con,localhost,root,,,,,SSL);
drop table t1;
connection default;
disconnect ssl_con;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/ssl.test
View file @ b63c7b2b
......@@ -3,6 +3,9 @@
-- source include/have_ssl.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (ssl_con,localhost,root,,,,,SSL);
# Check ssl turned on
......@@ -14,4 +17,9 @@ SHOW STATUS LIKE 'Ssl_cipher';
# Check ssl turned on
SHOW STATUS LIKE 'Ssl_cipher';
connection default;
disconnect ssl_con;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/ssl_compress.test
View file @ b63c7b2b
......@@ -4,6 +4,9 @@
-- source include/have_ssl.inc
-- source include/have_compress.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (ssl_compress_con,localhost,root,,,,,SSL COMPRESS);
# Check ssl turned on
......@@ -20,3 +23,10 @@ SHOW STATUS LIKE 'Ssl_cipher';
# Check compression turned on
SHOW STATUS LIKE 'Compression';
connection default;
disconnect ssl_compress_con;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/status.test
View file @ b63c7b2b
......@@ -268,6 +268,7 @@ show status like 'Com%function';
#
connect (root, localhost, root,,test);
connection root;
let $root_connection_id= `select connection_id()`;
--disable_warnings
create database db37908;
--enable_warnings
......@@ -282,6 +283,7 @@ delimiter ;|
connect (user1,localhost,mysqltest_1,,test);
connection user1;
let $user1_connection_id= `select connection_id()`;
--error ER_TABLEACCESS_DENIED_ERROR
select * from db37908.t1;
......@@ -300,8 +302,12 @@ drop procedure proc37908;
drop function func37908;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM mysqltest_1@localhost;
DROP USER mysqltest_1@localhost;
# Wait till we reached the initial number of concurrent sessions
--source include/wait_until_count_sessions.inc
# Wait till the sessions user1 and root are disconnected
let $wait_condition =
SELECT COUNT(*) = 0
FROM information_schema.processlist
WHERE id in ('$root_connection_id','$user1_connection_id');
--source include/wait_condition.inc
#
# Bug#41131 "Questions" fails to increment - ignores statements instead stored procs
......
mysql-test/t/user_limits.test
View file @ b63c7b2b
......@@ -3,9 +3,12 @@
#
# Requires privileges to be enabled
-- source include/not_embedded.inc
--source include/not_embedded.inc
# Prepare play-ground
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# Prepare play-ground
--disable_warnings
drop table if exists t1;
--enable_warnings
......@@ -28,11 +31,11 @@ connect (mqph, localhost, mysqltest_1,,);
connection mqph;
select * from t1;
select * from t1;
--error 1226
--error ER_USER_LIMIT_REACHED
select * from t1;
connect (mqph2, localhost, mysqltest_1,,);
connection mqph2;
--error 1226
--error ER_USER_LIMIT_REACHED
select * from t1;
# cleanup
connection default;
......@@ -50,12 +53,12 @@ select * from t1;
select * from t1;
delete from t1;
delete from t1;
--error 1226
--error ER_USER_LIMIT_REACHED
delete from t1;
select * from t1;
connect (muph2, localhost, mysqltest_1,,);
connection muph2;
--error 1226
--error ER_USER_LIMIT_REACHED
delete from t1;
select * from t1;
# Cleanup
......@@ -74,7 +77,7 @@ connect (mcph2, localhost, mysqltest_1,,);
connection mcph2;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (mcph3, localhost, mysqltest_1,,);
# Old connection is still ok
select * from t1;
......@@ -83,7 +86,7 @@ select * from t1;
disconnect mcph1;
disconnect mcph2;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (mcph3, localhost, mysqltest_1,,);
# Cleanup
connection default;
......@@ -101,13 +104,13 @@ connect (muc2, localhost, mysqltest_1,,);
connection muc2;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (muc3, localhost, mysqltest_1,,);
# Closing of one of connections should help
disconnect muc1;
connect (muc3, localhost, mysqltest_1,,);
select * from t1;
# Changing of limit should also help (and immediately)
# Changing of limit should also help (and immediately)
connection default;
grant usage on *.* to mysqltest_1@localhost with max_user_connections 3;
flush user_resources;
......@@ -115,7 +118,7 @@ connect (muc4, localhost, mysqltest_1,,);
connection muc4;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (muc5, localhost, mysqltest_1,,);
# Clean up
connection default;
......@@ -129,10 +132,10 @@ drop user mysqltest_1@localhost;
select @@session.max_user_connections, @@global.max_user_connections;
# Local max_user_connections variable can't be set directly
# since this limit is per-account
--error 1229
set session max_user_connections= 2;
--error ER_GLOBAL_VARIABLE
set session max_user_connections= 2;
# But it is ok to set global max_user_connections
set global max_user_connections= 2;
set global max_user_connections= 2;
select @@session.max_user_connections, @@global.max_user_connections;
# Let us check that global limit works
grant usage on *.* to mysqltest_1@localhost;
......@@ -144,7 +147,7 @@ connect (muca2, localhost, mysqltest_1,,);
connection muca2;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1203
--error ER_TOO_MANY_USER_CONNECTIONS
connect (muca3, localhost, mysqltest_1,,);
# Now we are testing that per-account limit prevails over gloabl limit
connection default;
......@@ -154,16 +157,20 @@ connect (muca3, localhost, mysqltest_1,,);
connection muca3;
select @@session.max_user_connections, @@global.max_user_connections;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (muca4, localhost, mysqltest_1,,);
# Cleanup
connection default;
disconnect muca1;
disconnect muca2;
disconnect muca3;
set global max_user_connections= 0;
set global max_user_connections= 0;
drop user mysqltest_1@localhost;
--enable_ps_protocol
# Final cleanup
drop table t1;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/view.test
View file @ b63c7b2b
This diff is collapsed.
mysql-test/t/view_grant.test
View file @ b63c7b2b
This diff is collapsed.
mysql-test/t/wait_timeout.test
View file @ b63c7b2b
......@@ -10,8 +10,11 @@
-- source include/not_embedded.inc
-- source include/one_thread_per_connection.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
#
# Bug#8731: wait_timeout does not work on Mac OS X
# Bug#8731 wait_timeout does not work on Mac OS X
#
let $start_value= `SELECT @@global.wait_timeout`;
......@@ -113,6 +116,7 @@ while (!`select @aborted_clients`)
# the disconnect has reached client
let $wait_condition= SELECT COUNT(*)=1 FROM information_schema.processlist;
--source include/wait_condition.inc
disconnect wait_con;
--echo connection con1;
connection con1;
......@@ -126,8 +130,13 @@ SELECT 2;
SELECT 3;
--replace_result $start_value <start_value>
eval SET @@global.wait_timeout= $start_value;
# ML: The start value might be changed in future ...
--echo disconnection con1;
disconnect con1;
# The last connect is to keep tools checking the current test happy.
connect (default,localhost,root,,test,,);
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/xa.test
View file @ b63c7b2b
......@@ -2,6 +2,10 @@
# WL#1756
#
-- source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1, t2;
--enable_warnings
......@@ -14,10 +18,10 @@ xa rollback 'test1';
select * from t1;
xa start 'test2';
--error 1399
--error ER_XAER_RMFAIL
xa start 'test-bad';
insert t1 values (20);
--error 1399
--error ER_XAER_RMFAIL
xa prepare 'test2';
xa end 'test2';
xa prepare 'test2';
......@@ -27,22 +31,22 @@ select * from t1;
xa start 'testa','testb';
insert t1 values (30);
--error 1399
--error ER_XAER_RMFAIL
commit;
xa end 'testa','testb';
--error 1399
--error ER_XAER_RMFAIL
begin;
--error 1399
--error ER_XAER_RMFAIL
create table t2 (a int);
connect (con1,localhost,root,,);
connection con1;
--error 1440
--error ER_XAER_DUPID
xa start 'testa','testb';
--error 1440
--error ER_XAER_DUPID
xa start 'testa','testb', 123;
# gtrid [ , bqual [ , formatID ] ]
......@@ -51,7 +55,7 @@ insert t1 values (40);
xa end 'testb',' 0@P`',11;
xa prepare 'testb',0x2030405060,11;
--error 1399
--error ER_XAER_RMFAIL
start transaction;
xa recover;
......@@ -64,11 +68,11 @@ xa prepare 'testa','testb';
xa recover;
--error 1397
--error ER_XAER_NOTA
xa commit 'testb',0x2030405060,11;
xa rollback 'testa','testb';
--error 1064
--error ER_PARSE_ERROR
xa start 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz';
select * from t1;
......@@ -119,3 +123,7 @@ xa start 'a','c';
drop table t1;
--echo End of 5.0 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7