Merge of fix for Bug#42003 and Bug#43114 into more actual GCA tree

modifications according to the reviews are included

mysql-test/include/wait_until_count_sessions.inc

@@ -2,14 +2,23 @@
 #
 # SUMMARY
 #
-#    Waits until the passed number ($count_sessions) of concurrent sessions was
-#    observed via
+#    Waits until the passed number ($count_sessions) of concurrent sessions or
+#    a smaller number was observed via
 #       SHOW STATUS LIKE 'Threads_connected'
 #    or the operation times out.
-#    Note: Starting with 5.1 we could also use
-#          SELECT COUNT(*) FROM information_schema.processlist
-#          I stay with "SHOW STATUS LIKE 'Threads_connected'" because this
-#          runs in all versions 5.0+
+#    Note:
+#    1. We wait for $current_sessions <= $count_sessions because in the use case
+#       with count_sessions.inc before and wait_until_count_sessions.inc after
+#       the core of the test it could happen that the disconnects of sessions
+#       belonging to the preceeding test are not finished.
+#       sessions at test begin($count_sessions) =  m + n
+#       sessions of the previous test which will be soon disconnected = n (n >= 0)
+#       sessions at test end ($current sessions, assuming the test disconnects
+#          all additional sessions) = m
+#    2. Starting with 5.1 we could also use
+#       SELECT COUNT(*) FROM information_schema.processlist
+#       I stay with "SHOW STATUS LIKE 'Threads_connected'" because this
+#       runs in all versions 5.0+
 #
 #
 # USAGE
@@ -19,7 +28,7 @@
 #
 #    OR typical example of a test which uses more than one session
 #       Such a test could harm successing tests if there is no server shutdown
-#       and start between.cw
+#       and start between.
 #
 #       If the testing box is slow than the disconnect of sessions belonging to
 #       the current test might happen when the successing test gets executed.
@@ -79,7 +88,11 @@
 #    backup.test, grant3.test
 #
 #
-# Created: 2009-01-14 mleich
+# Created:
+#    2009-01-14 mleich
+# Modified:
+#    2009-02-24 mleich Fix Bug#43114 wait_until_count_sessions too restrictive,
+#                                    random PB failures
 #
 
 let $wait_counter= 100;
@@ -93,7 +106,7 @@ let $wait_timeout= 0;
 while ($wait_counter)
 {
    let $current_sessions= query_get_value(SHOW STATUS LIKE 'Threads_connected', Value, 1);
-   let $success= `SELECT $current_sessions = $count_sessions`;
+   let $success= `SELECT $current_sessions <= $count_sessions`;
    if ($success)
    {
       let $wait_counter= 0;
@@ -107,7 +120,7 @@ while ($wait_counter)
 if (!$success)
 {
    --echo # Timeout in wait_until_count_sessions.inc
-   --echo # Number of sessions   expected: $count_sessions   found: $current_sessions
+   --echo # Number of sessions   expected: <= $count_sessions   found: $current_sessions
    SHOW PROCESSLIST;
 }
 

mysql-test/r/consistent_snapshot.result

-drop table if exists t1;
-create table t1 (a int) engine=innodb;
-start transaction with consistent snapshot;
-insert into t1 values(1);
-select * from t1;
+DROP TABLE IF EXISTS t1;
+# Establish connection con1 (user=root)
+# Establish connection con2 (user=root)
+# Switch to connection con1
+CREATE TABLE t1 (a INT) ENGINE=innodb;
+START TRANSACTION WITH CONSISTENT SNAPSHOT;
+# Switch to connection con2
+INSERT INTO t1 VALUES(1);
+# Switch to connection con1
+SELECT * FROM t1;
 a
-commit;
-delete from t1;
-start transaction;
-insert into t1 values(1);
-select * from t1;
+COMMIT;
+DELETE FROM t1;
+START TRANSACTION;
+# Switch to connection con2
+INSERT INTO t1 VALUES(1);
+# Switch to connection con1
+SELECT * FROM t1;
 a
 1
-commit;
-drop table t1;
+COMMIT;
+# Switch to connection default + close connections con1 and con2
+DROP TABLE t1;

mysql-test/r/dirty_close.result

-drop table if exists t1;
-create table t1 (n int);
-insert into t1 values (1),(2),(3);
-select * from t1;
+DROP TABLE IF EXISTS t1;
+CREATE TABLE t1 (n INT);
+INSERT INTO t1 VALUES (1),(2),(3);
+SELECT * FROM t1;
 n
 1
 2
 3
-drop table t1;
+DROP TABLE t1;

mysql-test/r/flush_block_commit.result

-drop table if exists t1;
-create table t1 (a int) engine=innodb;
-begin;
-insert into t1 values(1);
-flush tables with read lock;
-select * from t1;
+# Establish connection con1 (user=root)
+# Establish connection con2 (user=root)
+# Establish connection con3 (user=root)
+# Switch to connection con1
+DROP TABLE IF EXISTS t1;
+CREATE TABLE t1 (a INT) ENGINE=innodb;
+BEGIN;
+INSERT INTO t1 VALUES(1);
+# Switch to connection con2
+FLUSH TABLES WITH READ LOCK;
+SELECT * FROM t1;
 a
-commit;
-select * from t1;
+# Switch to connection con1
+COMMIT;
+# Switch to connection con2
+SELECT * FROM t1;
 a
-unlock tables;
-begin;
-select * from t1 for update;
+UNLOCK TABLES;
+# Switch to connection con1
+# Switch to connection con1
+BEGIN;
+SELECT * FROM t1 FOR UPDATE;
 a
 1
-begin;
-select * from t1 for update;
-flush tables with read lock;
-commit;
+# Switch to connection con2
+BEGIN;
+SELECT * FROM t1 FOR UPDATE;
+# Switch to connection con3
+FLUSH TABLES WITH READ LOCK;
+# Switch to connection con1
+COMMIT;
+# Switch to connection con2
 a
 1
-unlock tables;
-commit;
-begin;
-insert into t1 values(10);
-flush tables with read lock;
-commit;
-unlock tables;
-flush tables with read lock;
-unlock tables;
-begin;
-select * from t1;
+# Switch to connection con3
+UNLOCK TABLES;
+# Switch to connection con2
+COMMIT;
+# Switch to connection con1
+BEGIN;
+INSERT INTO t1 VALUES(10);
+FLUSH TABLES WITH READ LOCK;
+COMMIT;
+UNLOCK TABLES;
+# Switch to connection con2
+FLUSH TABLES WITH READ LOCK;
+UNLOCK TABLES;
+BEGIN;
+SELECT * FROM t1;
 a
 1
 10
-show create database test;
+SHOW CREATE DATABASE test;
 Database	Create Database
 test	CREATE DATABASE `test` /*!40100 DEFAULT CHARACTER SET latin1 */
-drop table t1;
+DROP TABLE t1;
+# Switch to connection default and close connections con1, con2, con3

mysql-test/r/flush_block_commit_notembedded.result

-create table t1 (a int) engine=innodb;
-reset master;
-set autocommit=0;
-insert t1 values (1);
-flush tables with read lock;
-show master status;
+# Establish connection con1 (user=root)
+# Establish connection con2 (user=root)
+# Switch to connection con1
+CREATE TABLE t1 (a INT) ENGINE=innodb;
+RESET MASTER;
+SET AUTOCOMMIT=0;
+INSERT t1 VALUES (1);
+# Switch to connection con2
+FLUSH TABLES WITH READ LOCK;
+SHOW MASTER STATUS;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
 master-bin.000001	98		
-commit;
-show master status;
+# Switch to connection con1
+COMMIT;
+# Switch to connection con2
+SHOW MASTER STATUS;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
 master-bin.000001	98		
-unlock tables;
-drop table t1;
-set autocommit=1;
+UNLOCK TABLES;
+# Switch to connection con1
+DROP TABLE t1;
+SET AUTOCOMMIT=1;
+# Switch to connection default and close connections con1 and con2

mysql-test/r/flush_read_lock_kill.result

-drop table if exists t1;
-create table t1 (kill_id int);
-insert into t1 values(connection_id());
-flush tables with read lock;
-select ((@id := kill_id) - kill_id) from t1;
+SET @old_concurrent_insert= @@global.concurrent_insert;
+SET @@global.concurrent_insert= 0;
+DROP TABLE IF EXISTS t1;
+CREATE TABLE t1 (kill_id INT);
+INSERT INTO t1 VALUES(connection_id());
+FLUSH TABLES WITH READ LOCK;
+SELECT ((@id := kill_id) - kill_id) FROM t1;
 ((@id := kill_id) - kill_id)
 0
-kill connection @id;
-drop table t1;
+KILL CONNECTION @id;
+DROP TABLE t1;
+SET @@global.concurrent_insert= @old_concurrent_insert;

mysql-test/r/lock_multi.result

@@ -51,10 +51,10 @@ ERROR HY000: Can't execute the query because you have a conflicting read lock
 UNLOCK TABLES;
 DROP DATABASE mysqltest_1;
 ERROR HY000: Can't drop database 'mysqltest_1'; database doesn't exist
-use mysql;
+USE mysql;
 LOCK TABLES columns_priv WRITE, db WRITE, host WRITE, user WRITE;
 FLUSH TABLES;
-use mysql;
+USE mysql;
 SELECT user.Select_priv FROM user, db WHERE user.user = db.user LIMIT 1;
 OPTIMIZE TABLES columns_priv, db, host, user;
 Table	Op	Msg_type	Msg_text
@@ -65,7 +65,7 @@ mysql.user	optimize	status	OK
 UNLOCK TABLES;
 Select_priv
 N
-use test;
+USE test;
 use test;
 CREATE TABLE t1 (c1 int);
 LOCK TABLE t1 WRITE;
@@ -93,7 +93,7 @@ create table t1 (a int);
 connection: locker
 lock tables t1 read;
 connection: writer
-create table t2 like t1;;
+create table t2 like t1;
 connection: default
 kill query
 ERROR 70100: Query execution was interrupted

mysql-test/r/mysqlbinlog.result

@@ -349,9 +349,9 @@ DELIMITER ;
 ROLLBACK /* added by mysqlbinlog */;
 /*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;
 CREATE TABLE t1 (c1 CHAR(10));
-flush logs;
+FLUSH LOGS;
 INSERT INTO t1 VALUES ('0123456789');
-flush logs;
+FLUSH LOGS;
 DROP TABLE t1;
 We expect this value to be 1
 The bug being tested was that 'Query' lines were not preceded by '#'
@@ -361,23 +361,23 @@ SELECT COUNT(*) AS `BUG#28293_expect_1` FROM patch WHERE a LIKE '%Query%';
 BUG#28293_expect_1
 1
 DROP TABLE patch;
-flush logs;
-create table t1(a int);
-insert into t1 values(connection_id());
-flush logs;
-drop table t1;
+FLUSH LOGS;
+CREATE TABLE t1(a INT);
+INSERT INTO t1 VALUES(connection_id());
+FLUSH LOGS;
+DROP TABLE t1;
 1
-drop table t1;
+DROP TABLE t1;
 shell> mysqlbinlog std_data/corrupt-relay-bin.000624 > var/tmp/bug31793.sql
-set @@global.server_id= 4294967295;
-reset master;
-flush logs;
-select
-(@a:=load_file("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
-is not null;
-(@a:=load_file("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
-is not null
+SET @@global.server_id= 4294967295;
+RESET MASTER;
+FLUSH LOGS;
+SELECT
+(@a:=LOAD_FILE("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
+IS NOT NULL;
+(@a:=LOAD_FILE("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
+IS NOT NULL
 1
 *** Unsigned server_id 4294967295 is found: 1 ***
-set @@global.server_id= 1;
+SET @@global.server_id= 1;
 End of 5.0 tests

mysql-test/r/read_only.result

@@ -47,7 +47,7 @@ Note	1051	Unknown table 'ttt'
 drop table t1,t2;
 drop user test@localhost;
 #
-# Bug #27440 read_only allows create and drop database
+# Bug#27440 read_only allows create and drop database
 #
 drop database if exists mysqltest_db1;
 drop database if exists mysqltest_db2;

mysql-test/r/show_check.result

@@ -507,9 +507,9 @@ ERROR 42000: Access denied for user 'mysqltest_3'@'localhost' to database 'mysql
 drop table mysqltest.t1;
 drop database mysqltest;
 set names binary;
-delete from mysql.user 
+delete from mysql.user
 where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
-delete from mysql.db   
+delete from mysql.db
 where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
 flush privileges;
 CREATE TABLE t1 (i int, KEY (i)) ENGINE=MEMORY;
@@ -916,7 +916,7 @@ def			TRIGGERS	DEFINER	Definer	252	589815	14	N	17	0	33
 Trigger	Event	Table	Statement	Timing	Created	sql_mode	Definer
 t1_bi	INSERT	t1	SET @a = 1	BEFORE	NULL		root@localhost
 ----------------------------------------------------------------
-SELECT 
+SELECT
 TRIGGER_CATALOG,
 TRIGGER_SCHEMA,
 TRIGGER_NAME,

mysql-test/r/skip_name_resolve.result

@@ -5,10 +5,10 @@ GRANT USAGE ON *.* TO 'mysqltest_1'@'127.0.0.1/255.255.255.255'
 GRANT ALL PRIVILEGES ON `test`.* TO 'mysqltest_1'@'127.0.0.1/255.255.255.255'
 REVOKE ALL ON test.* FROM mysqltest_1@'127.0.0.1/255.255.255.255';
 DROP USER mysqltest_1@'127.0.0.1/255.255.255.255';
-select user();
-user()
+SELECT USER();
+USER()
 #
-show processlist;
+SHOW PROCESSLIST;
 Id	User	Host	db	Command	Time	State	Info
 <id>	root	<host>	test	<command>	<time>	<state>	<info>
 <id>	root	<host>	test	<command>	<time>	<state>	<info>

mysql-test/r/sp-security.result

@@ -332,7 +332,7 @@ ERROR 42000: SELECT command denied to user 'user_bug14533'@'localhost' for table
 drop user user_bug14533@localhost;
 drop database db_bug14533;
 CREATE DATABASE db_bug7787;
-use db_bug7787;
+USE db_bug7787;
 CREATE PROCEDURE p1()
 SHOW INNODB STATUS;
 Warnings:
@@ -352,12 +352,12 @@ GRANT SUPER ON *.* TO mysqltest_2@localhost;
 GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
 
 ---> connection: mysqltest_2_con
-use mysqltest;
+USE mysqltest;
 CREATE PROCEDURE wl2897_p1() SELECT 1;
 CREATE FUNCTION wl2897_f1() RETURNS INT RETURN 1;
 
 ---> connection: mysqltest_1_con
-use mysqltest;
+USE mysqltest;
 CREATE DEFINER=root@localhost PROCEDURE wl2897_p2() SELECT 2;
 ERROR 42000: Access denied; you need the SUPER privilege for this operation
 CREATE DEFINER=root@localhost FUNCTION wl2897_f2() RETURNS INT RETURN 2;
@@ -373,7 +373,7 @@ Warnings:
 Note	1449	There is no 'a @ b @ c'@'localhost' registered
 
 ---> connection: con1root
-use mysqltest;
+USE mysqltest;
 SHOW CREATE PROCEDURE wl2897_p1;
 Procedure	sql_mode	Create Procedure
 wl2897_p1		CREATE DEFINER=`mysqltest_2`@`localhost` PROCEDURE `wl2897_p1`()
@@ -403,7 +403,7 @@ CREATE USER mysqltest_2@localhost;
 GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
 
 ---> connection: mysqltest_1_con
-use mysqltest;
+USE mysqltest;
 CREATE PROCEDURE bug13198_p1()
 SELECT 1;
 CREATE FUNCTION bug13198_f1() RETURNS INT
@@ -416,7 +416,7 @@ bug13198_f1()
 1
 
 ---> connection: mysqltest_2_con
-use mysqltest;
+USE mysqltest;
 CALL bug13198_p1();
 1
 1
@@ -428,7 +428,7 @@ bug13198_f1()
 DROP USER mysqltest_1@localhost;
 
 ---> connection: mysqltest_2_con
-use mysqltest;
+USE mysqltest;
 CALL bug13198_p1();
 ERROR HY000: There is no 'mysqltest_1'@'localhost' registered
 SELECT bug13198_f1();
@@ -445,7 +445,7 @@ Host	User	Password
 localhost	user19857	*82DC221D557298F6CE9961037DB1C90604792F5C
 
 ---> connection: mysqltest_2_con
-use test;
+USE test;
 CREATE PROCEDURE sp19857() DETERMINISTIC
 BEGIN
 DECLARE a INT;

mysql-test/r/view.result

@@ -1667,9 +1667,9 @@ INSERT INTO t2 VALUES (4,3,'n');
 INSERT INTO t2 VALUES (6,1,'n');
 INSERT INTO t2 VALUES (8,1,'y');
 CREATE VIEW v1 AS SELECT * FROM t1;
-SELECT a.col1,a.col2,b.col2,b.col3 
+SELECT a.col1,a.col2,b.col2,b.col3
 FROM t1 a LEFT JOIN t2 b ON a.col1=b.col1
-WHERE b.col2 IS NULL OR 
+WHERE b.col2 IS NULL OR
 b.col2=(SELECT MAX(col2) FROM t2 b WHERE b.col1=a.col1);
 col1	col2	col2	col3
 1	trudy	2	y
@@ -1681,9 +1681,9 @@ col1	col2	col2	col3
 7	carsten	NULL	NULL
 8	ranger	1	y
 10	matt	NULL	NULL
-SELECT a.col1,a.col2,b.col2,b.col3 
+SELECT a.col1,a.col2,b.col2,b.col3
 FROM v1 a LEFT JOIN t2 b ON a.col1=b.col1
-WHERE b.col2 IS NULL OR 
+WHERE b.col2 IS NULL OR
 b.col2=(SELECT MAX(col2) FROM t2 b WHERE b.col1=a.col1);
 col1	col2	col2	col3
 1	trudy	2	y
@@ -1737,7 +1737,7 @@ A	A
 2	2
 3	3
 create table t3 as select a a,a b from t2;
-create view v2 as select * from t3 where 
+create view v2 as select * from t3 where
 a in (select * from t1) or b in (select * from t2);
 select * from v2 A, v2 B where A.a = B.b;
 a	b	a	b
@@ -1993,7 +1993,7 @@ dkjhgd
 drop view v1;
 create table t1 (f59 int, f60 int, f61 int);
 insert into t1 values (19,41,32);
-create view v1 as select f59, f60 from t1 where f59 in  
+create view v1 as select f59, f60 from t1 where f59 in
 (select f59 from t1);
 update v1 set f60=2345;
 ERROR HY000: The target table v1 of the UPDATE is not updatable
@@ -2120,7 +2120,7 @@ pid int NOT NULL
 INSERT INTO t1 VALUES(1,'a','b'), (2,'c','d');
 INSERT INTO t2 values (1,1), (2,1), (2,2);
 CREATE VIEW v1 AS SELECT t1.*,t2.pid FROM t1,t2 WHERE t1.aid = t2.aid;
-SELECT pid,GROUP_CONCAT(CONCAT(fn,' ',ln) ORDER BY 1) FROM t1,t2 
+SELECT pid,GROUP_CONCAT(CONCAT(fn,' ',ln) ORDER BY 1) FROM t1,t2
 WHERE t1.aid = t2.aid GROUP BY pid;
 pid	GROUP_CONCAT(CONCAT(fn,' ',ln) ORDER BY 1)
 1	a b,c d
@@ -2222,7 +2222,7 @@ group_name varchar(32) NOT NULL
 ) engine = InnoDB;
 create table t2 (
 r_object_id char(16) NOT NULL,
-i_position int(11) NOT NULL, 
+i_position int(11) NOT NULL,
 users_names varchar(32) default NULL
 ) Engine = InnoDB;
 create view v1 as select r_object_id, group_name from t1;
@@ -2235,7 +2235,7 @@ insert into t1 values('120001a080000542','tstgroup1');
 insert into t2 values('120001a080000542',-1, 'guser01');
 insert into t2 values('120001a080000542',-2, 'guser02');
 select v1.r_object_id, v2.users_names from v1, v2
-where (v1.group_name='tstgroup1') and v2.r_object_id=v1.r_object_id 
+where (v1.group_name='tstgroup1') and v2.r_object_id=v1.r_object_id
 order by users_names;
 r_object_id	users_names
 120001a080000542	guser01
@@ -2385,8 +2385,8 @@ create table t4 (x int, y int, z int);
 create view v1 as
 select t1.x
 from (
-(t1 join t2 on ((t1.y = t2.y))) 
-join 
+(t1 join t2 on ((t1.y = t2.y)))
+join
 (t3 left join t4 on (t3.y = t4.y) and (t3.z = t4.z))
 );
 prepare stmt1 from "select count(*) from v1 where x = ?";
@@ -2562,12 +2562,12 @@ Warnings:
 Warning	1052	Column 'x' in group statement is ambiguous
 DROP VIEW v1;
 DROP TABLE t1;
-drop table if exists t1; 
-drop view if exists v1; 
-create table t1 (id int); 
-create view v1 as select * from t1; 
-drop table t1; 
-show create view v1; 
+drop table if exists t1;
+drop view if exists v1;
+create table t1 (id int);
+create view v1 as select * from t1;
+drop table t1;
+show create view v1;
 drop view v1;
 //
 View	Create View
@@ -2614,7 +2614,7 @@ DROP VIEW v2;
 DROP TABLE t1, t2;
 CREATE TABLE t1 (id int NOT NULL PRIMARY KEY,
 td date DEFAULT NULL, KEY idx(td));
-INSERT INTO t1 VALUES 
+INSERT INTO t1 VALUES
 (1, '2005-01-01'), (2, '2005-01-02'), (3, '2005-01-02'),
 (4, '2005-01-03'), (5, '2005-01-04'), (6, '2005-01-05'),
 (7, '2005-01-05'), (8, '2005-01-05'), (9, '2005-01-06');
@@ -2978,10 +2978,10 @@ drop view v1;
 drop table t1;
 CREATE TABLE t1(pk int PRIMARY KEY);
 CREATE TABLE t2(pk int PRIMARY KEY, fk int, ver int, org int);
-CREATE ALGORITHM=MERGE VIEW v1 AS 
+CREATE ALGORITHM=MERGE VIEW v1 AS
 SELECT t1.*
-FROM t1 JOIN t2 
-ON t2.fk = t1.pk AND 
+FROM t1 JOIN t2
+ON t2.fk = t1.pk AND
 t2.ver = (SELECT MAX(t.ver) FROM t2 t WHERE t.org = t2.org);
 SHOW WARNINGS;
 Level	Code	Message
@@ -3311,7 +3311,7 @@ name char(10) NOT NULL
 INSERT INTO t1 (lid, name) VALUES
 (1, 'YES'), (2, 'NO');
 CREATE TABLE t2 (
-id int NOT NULL PRIMARY KEY, 
+id int NOT NULL PRIMARY KEY,
 gid int NOT NULL,
 lid int NOT NULL,
 dt date
@@ -3410,8 +3410,8 @@ CREATE TABLE t1 (id int);
 CREATE TABLE t2 (id int, c int DEFAULT 0);
 INSERT INTO t1 (id) VALUES (1);
 INSERT INTO t2 (id) VALUES (1);
-CREATE VIEW v1 AS 
-SELECT t2.c FROM t1, t2 
+CREATE VIEW v1 AS
+SELECT t2.c FROM t1, t2
 WHERE t1.id=t2.id AND 1 IN (SELECT id FROM t1) WITH CHECK OPTION;
 UPDATE v1 SET c=1;
 DROP VIEW v1;
@@ -3519,7 +3519,7 @@ role_name varchar(100) default NULL,
 app_name varchar(40) NOT NULL,
 INDEX idx_app_name(app_name)
 );
-CREATE VIEW v1 AS 
+CREATE VIEW v1 AS
 SELECT profile.person_id AS person_id
 FROM t1 profile, t2 userrole, t3 role
 WHERE userrole.person_id = profile.person_id AND
@@ -3531,7 +3531,7 @@ INSERT INTO  t1 VALUES
 (-717462680,'ENTS Ta','0'), (-904346964,'ndard SQL\n','0');
 INSERT INTO t2 VALUES
 (1,3,6),(2,4,7),(3,5,8),(4,6,9),(5,1,6),(6,1,7),(7,1,8),(8,1,9),(9,1,10);
-INSERT INTO t3 VALUES 
+INSERT INTO t3 VALUES
 (1,'NUCANS_APP_USER','NUCANSAPP'),(2,'NUCANS_TRGAPP_USER','NUCANSAPP'),
 (3,'IA_INTAKE_COORDINATOR','IACANS'),(4,'IA_SCREENER','IACANS'),
 (5,'IA_SUPERVISOR','IACANS'),(6,'IA_READONLY','IACANS'),
@@ -3557,7 +3557,7 @@ i
 2
 3
 4
-select table_name, is_updatable from information_schema.views 
+select table_name, is_updatable from information_schema.views
 where table_name = 'v1';
 table_name	is_updatable
 v1	NO
@@ -3603,8 +3603,8 @@ DROP VIEW v2;
 DROP VIEW v3;
 DROP TABLE t1;
 #
-# Bug#29477: Not all fields of the target table were checked to have
-#            a default value when inserting into a view.
+# Bug#29477 Not all fields of the target table were checked to have
+#           a default value when inserting into a view.
 #
 create table t1(f1 int, f2 int not null);
 create view v1 as select f1 from t1;
@@ -3621,7 +3621,7 @@ drop table t1;
 create table t1 (a int, key(a));
 create table t2 (c int);
 create view v1 as select a b from t1;
-create view v2 as select 1 a from t2, v1 where c in 
+create view v2 as select 1 a from t2, v1 where c in
 (select 1 from t1 where b = a);
 insert into t1 values (1), (1);
 insert into t2 values (1), (1);
@@ -3643,7 +3643,7 @@ MAX(a)	COUNT(DISTINCT a)
 DROP VIEW v1;
 DROP TABLE t1;
 # -----------------------------------------------------------------
-# -- Bug#34337: Server crash when Altering a view using a table name.
+# -- Bug#34337 Server crash when Altering a view using a table name.
 # -----------------------------------------------------------------
 
 DROP TABLE IF EXISTS t1;
@@ -3660,8 +3660,8 @@ DROP TABLE t1;
 # -- End of test case for Bug#34337.
 
 # -----------------------------------------------------------------
-# -- Bug#35193: VIEW query is rewritten without "FROM DUAL",
-# --            causing syntax error
+# -- Bug#35193 VIEW query is rewritten without "FROM DUAL",
+# --           causing syntax error
 # -----------------------------------------------------------------
 
 CREATE VIEW v1 AS SELECT 1 FROM DUAL WHERE 1;

mysql-test/r/view_grant.result

@@ -644,7 +644,7 @@ CREATE DATABASE test2;
 CREATE TABLE test1.t0 (a VARCHAR(20));
 CREATE TABLE test2.t1 (a VARCHAR(20));
 CREATE VIEW  test2.t3 AS SELECT * FROM test1.t0;
-CREATE OR REPLACE VIEW test.v1 AS 
+CREATE OR REPLACE VIEW test.v1 AS
 SELECT ta.a AS col1, tb.a AS col2 FROM test2.t3 ta, test2.t1 tb;
 DROP VIEW test.v1;
 DROP VIEW test2.t3;
@@ -788,7 +788,7 @@ v3	CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VI
 DROP USER u26813@localhost;
 DROP DATABASE db26813;
 #
-# Bug#29908: A user can gain additional access through the ALTER VIEW.
+# Bug#29908 A user can gain additional access through the ALTER VIEW.
 #
 CREATE DATABASE mysqltest_29908;
 USE mysqltest_29908;

mysql-test/t/alter_table-big.test

-# In order to be more or less robust test for bug#25044 has to take
+# In order to be more or less robust test for Bug#25044 has to take
 # significant time (e.g. about 9 seconds on my (Dmitri's) computer)
 # so we probably want execute it only in --big-test mode.
 # Also in 5.1 this test will require statement-based binlog.
@@ -6,8 +6,8 @@
 
 
 #
-# Test for bug #25044 "ALTER TABLE ... ENABLE KEYS acquires global
-# 'opening tables' lock".
+# Test for Bug#25044 ALTER TABLE ... ENABLE KEYS acquires global
+#                    'opening tables' lock
 #
 # ALTER TABLE ... ENABLE KEYS should not acquire LOCK_open mutex for
 # the whole its duration as it prevents other queries from execution.
@@ -57,6 +57,7 @@ show binlog events in 'master-bin.000001' from 98;
 
 # Clean up
 drop tables t1, t2;
+disconnect addconroot;
 
 
 --echo End of 5.0 tests

mysql-test/t/connect.test

@@ -18,12 +18,16 @@ connect (con2,localhost,root,,test);
 show tables;
 
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,root,z,test2);
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,root,z,);
 
+connection default;
+disconnect con1;
+disconnect con2;
+
 grant ALL on *.* to test@localhost identified by "gambling";
 grant ALL on *.* to test@127.0.0.1 identified by "gambling";
 
@@ -35,20 +39,23 @@ show tables;
 connect (con4,localhost,test,gambling,test);
 show tables;
 
+connection default;
+disconnect con3;
+disconnect con4;
+
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,,test2);
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,,"");
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,zorro,test2);
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,zorro,);
 
-
 # check if old password version also works
 update mysql.user set password=old_password("gambling2") where user=_binary"test";
 flush privileges;
@@ -57,30 +64,34 @@ connect (con10,localhost,test,gambling2,);
 connect (con5,localhost,test,gambling2,mysql);
 connection con5;
 set password="";
---error 1372
+--error ER_PASSWD_LENGTH
 set password='gambling3';
 set password=old_password('gambling3');
 show tables;
 connect (con6,localhost,test,gambling3,test);
 show tables;
 
+connection default;
+disconnect con10;
+disconnect con5;
+disconnect con6;
+
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,,test2);
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,,);
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,zorro,test2);
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
---error 1045
+--error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,zorro,);
 
 
 # remove user 'test' so that other tests which may use 'test'
 # do not depend on this test.
-
 delete from mysql.user where user=_binary"test";
 flush privileges;
 
@@ -98,4 +109,5 @@ disconnect con7;
 connection default;
 drop table t1;
 
+
 # End of 4.1 tests

mysql-test/t/consistent_snapshot.test

--- source include/have_innodb.inc
+--source include/have_innodb.inc
+
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
 
 --disable_warnings
-drop table if exists t1;
+DROP TABLE IF EXISTS t1;
 --enable_warnings
 
+--echo # Establish connection con1 (user=root)
 connect (con1,localhost,root,,);
+--echo # Establish connection con2 (user=root)
 connect (con2,localhost,root,,);
 
 ### Test 1:
 ### - While a consistent snapshot transaction is executed,
 ###   no external inserts should be visible to the transaction.
 
+--echo # Switch to connection con1
 connection con1;
-create table t1 (a int) engine=innodb;
-start transaction with consistent snapshot;
+CREATE TABLE t1 (a INT) ENGINE=innodb;
+START TRANSACTION WITH CONSISTENT SNAPSHOT;
 
+--echo # Switch to connection con2
 connection con2;
-insert into t1 values(1);
+INSERT INTO t1 VALUES(1);
 
+--echo # Switch to connection con1
 connection con1;
-select * from t1; # if consistent snapshot was set as expected, we
+SELECT * FROM t1; # if consistent snapshot was set as expected, we
 # should see nothing.
-commit;
+COMMIT;
 
 ### Test 2:
 ### - For any non-consistent snapshot transaction, external
 ###   committed inserts should be visible to the transaction.
 
-delete from t1;
-start transaction; # Now we omit WITH CONSISTENT SNAPSHOT
+DELETE FROM t1;
+START TRANSACTION; # Now we omit WITH CONSISTENT SNAPSHOT
 
+--echo # Switch to connection con2
 connection con2;
-insert into t1 values(1);
+INSERT INTO t1 VALUES(1);
 
+--echo # Switch to connection con1
 connection con1;
-select * from t1; # if consistent snapshot was not set, as expected, we
+SELECT * FROM t1; # if consistent snapshot was not set, as expected, we
 # should see 1.
-commit;
+COMMIT;
 
-drop table t1;
+--echo # Switch to connection default + close connections con1 and con2
+connection default;
+disconnect con1;
+disconnect con2;
+DROP TABLE t1;
 
 # End of 4.1 tests
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/dirty_close.test

+
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 connect (con1,localhost,root,,);
 connect (con2,localhost,root,,);
 connection con1;
@@ -5,12 +9,19 @@ dirty_close con1;
 connection con2;
 
 --disable_warnings
-drop table if exists t1;
+DROP TABLE IF EXISTS t1;
 --enable_warnings
 
-create table t1 (n int);
-insert into t1 values (1),(2),(3);
-select * from t1;
-drop table t1;
+CREATE TABLE t1 (n INT);
+INSERT INTO t1 VALUES (1),(2),(3);
+SELECT * FROM t1;
+DROP TABLE t1;
+
+connection default;
+disconnect con2;
 
 # End of 4.1 tests
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/flush_block_commit.test

@@ -4,74 +4,106 @@
 # This is intended to mimick how mysqldump and innobackup work.
 
 # And it requires InnoDB
--- source include/have_innodb.inc
+--source include/have_innodb.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
+--echo # Establish connection con1 (user=root)
 connect (con1,localhost,root,,);
+--echo # Establish connection con2 (user=root)
 connect (con2,localhost,root,,);
+--echo # Establish connection con3 (user=root)
 connect (con3,localhost,root,,);
+--echo # Switch to connection con1
 connection con1;
 
 --disable_warnings
-drop table if exists t1;
+DROP TABLE IF EXISTS t1;
 --enable_warnings
-create table t1 (a int) engine=innodb;
+CREATE TABLE t1 (a INT) ENGINE=innodb;
 
 # blocks COMMIT ?
 
-begin;
-insert into t1 values(1);
+BEGIN;
+INSERT INTO t1 VALUES(1);
+--echo # Switch to connection con2
 connection con2;
-flush tables with read lock;
-select * from t1;
+FLUSH TABLES WITH READ LOCK;
+SELECT * FROM t1;
+--echo # Switch to connection con1
 connection con1;
-send commit; # blocked by con2
+send COMMIT; # blocked by con2
 sleep 1;
+--echo # Switch to connection con2
 connection con2;
-select * from t1; # verify con1 was blocked and data did not move
-unlock tables;
+SELECT * FROM t1; # verify con1 was blocked and data did not move
+UNLOCK TABLES;
+--echo # Switch to connection con1
 connection con1;
 reap;
 
 # No deadlock ?
 
+--echo # Switch to connection con1
 connection con1;
-begin;
-select * from t1 for update;
+BEGIN;
+SELECT * FROM t1 FOR UPDATE;
+--echo # Switch to connection con2
 connection con2;
-begin;
-send select * from t1 for update; # blocked by con1
+BEGIN;
+send SELECT * FROM t1 FOR UPDATE; # blocked by con1
 sleep 1;
+--echo # Switch to connection con3
 connection con3;
-send flush tables with read lock; # blocked by con2
+send FLUSH TABLES WITH READ LOCK; # blocked by con2
+--echo # Switch to connection con1
 connection con1;
-commit; # should not be blocked by con3
+COMMIT; # should not be blocked by con3
+--echo # Switch to connection con2
 connection con2;
 reap;
+--echo # Switch to connection con3
 connection con3;
 reap;
-unlock tables;
+UNLOCK TABLES;
 
-# BUG#6732 FLUSH TABLES WITH READ LOCK + COMMIT hangs later FLUSH TABLES
-# WITH READ LOCK
+# Bug#6732 FLUSH TABLES WITH READ LOCK + COMMIT hangs later FLUSH TABLES
+#          WITH READ LOCK
 
+--echo # Switch to connection con2
 connection con2;
-commit; # unlock InnoDB row locks to allow insertions
+COMMIT; # unlock InnoDB row locks to allow insertions
+--echo # Switch to connection con1
 connection con1;
-begin;
-insert into t1 values(10);
-flush tables with read lock;
-commit;
-unlock tables;
+BEGIN;
+INSERT INTO t1 VALUES(10);
+FLUSH TABLES WITH READ LOCK;
+COMMIT;
+UNLOCK TABLES;
+--echo # Switch to connection con2
 connection con2;
-flush tables with read lock; # bug caused hang here
-unlock tables;
+FLUSH TABLES WITH READ LOCK; # bug caused hang here
+UNLOCK TABLES;
+
+# Bug#7358 SHOW CREATE DATABASE fails if open transaction
+
+BEGIN;
+SELECT * FROM t1;
+SHOW CREATE DATABASE test;
 
-# BUG#7358 SHOW CREATE DATABASE fails if open transaction
+DROP TABLE t1;
 
-begin;
-select * from t1;
-show create database test;
 
-drop table t1;
+# Cleanup
+--echo # Switch to connection default and close connections con1, con2, con3
+connection default;
+disconnect con1;
+disconnect con2;
+disconnect con3;
 
 # End of 4.1 tests
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/flush_block_commit_notembedded.test

@@ -3,32 +3,51 @@
 # We verify that we did not introduce a deadlock.
 # This is intended to mimick how mysqldump and innobackup work.
 
--- source include/have_log_bin.inc
+--source include/have_log_bin.inc
 
 # And it requires InnoDB
--- source include/have_log_bin.inc
--- source include/have_innodb.inc
+--source include/have_log_bin.inc
+--source include/have_innodb.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
+
+--echo # Establish connection con1 (user=root)
 connect (con1,localhost,root,,);
+--echo # Establish connection con2 (user=root)
 connect (con2,localhost,root,,);
 
 # FLUSH TABLES WITH READ LOCK should block writes to binlog too
+--echo # Switch to connection con1
 connection con1;
-create table t1 (a int) engine=innodb;
-reset master;
-set autocommit=0;
-insert t1 values (1);
+CREATE TABLE t1 (a INT) ENGINE=innodb;
+RESET MASTER;
+SET AUTOCOMMIT=0;
+INSERT t1 VALUES (1);
+--echo # Switch to connection con2
 connection con2;
-flush tables with read lock;
-show master status;
+FLUSH TABLES WITH READ LOCK;
+SHOW MASTER STATUS;
+--echo # Switch to connection con1
 connection con1;
-send commit;
+send COMMIT;
+--echo # Switch to connection con2
 connection con2;
 sleep 1;
-show master status;
-unlock tables;
+SHOW MASTER STATUS;
+UNLOCK TABLES;
+--echo # Switch to connection con1
 connection con1;
 reap;
-drop table t1;
-set autocommit=1;
+DROP TABLE t1;
+SET AUTOCOMMIT=1;
+
+--echo # Switch to connection default and close connections con1 and con2
+connection default;
+disconnect con1;
+disconnect con2;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
 

mysql-test/t/flush_read_lock_kill.test

@@ -8,19 +8,27 @@
 # won't test anything interesting).
 
 # This also won't work with the embedded server test
--- source include/not_embedded.inc
+--source include/not_embedded.inc
 
--- source include/have_debug.inc
+--source include/have_debug.inc
+
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
+# Disable concurrent inserts to avoid test failures when reading the
+# connection id which was inserted into a table by another thread.
+SET @old_concurrent_insert= @@global.concurrent_insert;
+SET @@global.concurrent_insert= 0;
 
 connect (con1,localhost,root,,);
 connect (con2,localhost,root,,);
 connection con1;
 
 --disable_warnings
-drop table if exists t1;
+DROP TABLE IF EXISTS t1;
 --enable_warnings
-create table t1 (kill_id int);
-insert into t1 values(connection_id());
+CREATE TABLE t1 (kill_id INT);
+INSERT INTO t1 VALUES(connection_id());
 
 # Thanks to the parameter we passed to --debug, this FLUSH will
 # block on a debug build running with our --debug=make_global... It
@@ -28,14 +36,14 @@ insert into t1 values(connection_id());
 # --debug) it will succeed immediately
 
 connection con1;
-send flush tables with read lock;
+send FLUSH TABLES WITH READ LOCK;
 
 # kill con1
 connection con2;
-select ((@id := kill_id) - kill_id) from t1; 
+SELECT ((@id := kill_id) - kill_id) FROM t1;
 
 --sleep 2 # leave time for FLUSH to block
-kill connection @id;
+KILL CONNECTION @id;
 
 connection con1;
 # On debug builds it will be error 1053 (killed); on non-debug, or
@@ -46,4 +54,13 @@ connection con1;
 reap;
 
 connection con2;
-drop table t1;
+DROP TABLE t1;
+connection default;
+disconnect con2;
+
+# Restore global concurrent_insert value
+SET @@global.concurrent_insert= @old_concurrent_insert;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/init_connect.test

@@ -5,6 +5,9 @@
 # should work with embedded server after mysqltest is fixed
 --source include/not_embedded.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 --source include/add_anonymous_users.inc
 
 connect (con0,localhost,root,,);
@@ -233,7 +236,8 @@ connect (con1,localhost,mysqltest1,,);
 connection con1;
 select * from t1;
 
-connection con0;
+connection default;
+disconnect con0;
 disconnect con1;
 
 drop trigger trg1;
@@ -244,3 +248,7 @@ set global init_connect="set @a='a\\0c'";
 revoke all privileges, grant option from mysqltest1@localhost;
 drop user mysqltest1@localhost;
 drop table t1, t2;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/mysqlbinlog.test

@@ -18,7 +18,7 @@ insert into t2 values ();
 # set @a:=1
 # insert into t2 values (@a);
 
-# test for load data and load data distributed among the several 
+# test for load data and load data distributed among the several
 # files (we need to fill up first binlog)
 load data infile '../std_data_ln/words.dat' into table t1;
 load data infile '../std_data_ln/words.dat' into table t1;
@@ -103,7 +103,7 @@ select "--- --position --" as "";
 --replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
 --exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --read-from-remote-server --position=231 --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
 
-# Bug#7853 (mysqlbinlog does not accept input from stdin)
+# Bug#7853 mysqlbinlog does not accept input from stdin
 --disable_query_log
 select "--- reading stdin --" as "";
 --enable_query_log
@@ -117,7 +117,7 @@ select "--- reading stdin --" as "";
 drop table t1,t2;
 
 #
-#BUG#14157: utf8 encoding in binlog without set character_set_client
+# Bug#14157 utf8 encoding in binlog without set character_set_client
 #
 flush logs;
 --write_file $MYSQLTEST_VARDIR/tmp/bug14157.sql
@@ -130,8 +130,8 @@ EOF
 --exec $MYSQL test < $MYSQLTEST_VARDIR/tmp/bug14157.sql
 --remove_file $MYSQLTEST_VARDIR/tmp/bug14157.sql
 
-# resulted binlog, parly consisting of multi-byte utf8 chars, 
-# must be digestable for both client and server. In 4.1 the client 
+# resulted binlog, parly consisting of multi-byte utf8 chars,
+# must be digestable for both client and server. In 4.1 the client
 # should use default-character-set same as the server.
 --exec $MYSQL_BINLOG --short-form $MYSQLTEST_VARDIR/log/master-bin.000004 | $MYSQL
 select * from t5  /* must be (1),(1) */;
@@ -157,7 +157,7 @@ select * from t5 order by c1;
 drop table t5;
 
 #
-# Bug#20396 Bin Log does not get DELIMETER cmd - Recover StoredProc fails 
+# Bug#20396 Bin Log does not get DELIMETER cmd - Recover StoredProc fails
 #
 --disable_warnings
 drop procedure if exists p1;
@@ -174,7 +174,6 @@ flush logs;
 call p1();
 drop procedure p1;
 --error ER_SP_DOES_NOT_EXIST
-
 call p1();
 --replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
 --exec $MYSQL_BINLOG --short-form $MYSQLTEST_VARDIR/log/master-bin.000007
@@ -217,14 +216,14 @@ flush logs;
 
 #
 # Bug#28293 missed '#' sign in the hex dump when the dump length
-# is divisible by 16.
+#           is divisible by 16.
 #
 
 CREATE TABLE t1 (c1 CHAR(10));
 # we need this for getting fixed timestamps inside of this test
-flush logs;
+FLUSH LOGS;
 INSERT INTO t1 VALUES ('0123456789');
-flush logs;
+FLUSH LOGS;
 DROP TABLE t1;
 
 # We create a table, patch, and load the output into it
@@ -232,11 +231,11 @@ DROP TABLE t1;
 # We can easily see if a 'Query' line is missing the '#' character
 # as described in the original bug
 
---disable_query_log 
-CREATE TABLE patch (a blob);
+--disable_query_log
+CREATE TABLE patch (a BLOB);
 --exec $MYSQL_BINLOG --hexdump --local-load=$MYSQLTEST_VARDIR/tmp/ $MYSQLTEST_VARDIR/log/master-bin.000011 > $MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat
 eval LOAD DATA LOCAL INFILE '$MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat'
-     INTO TABLE patch FIELDS TERMINATED by '' LINES STARTING BY '#';
+     INTO TABLE patch FIELDS TERMINATED BY '' LINES STARTING BY '#';
 --remove_file $MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat
 --enable_query_log
 
@@ -248,49 +247,51 @@ SELECT COUNT(*) AS `BUG#28293_expect_1` FROM patch WHERE a LIKE '%Query%';
 DROP TABLE patch;
 
 #
-# Bug #29928: incorrect connection_id() restoring from mysqlbinlog out
+# Bug#29928 incorrect connection_id() restoring from mysqlbinlog out
 #
-flush logs;
-create table t1(a int);
-insert into t1 values(connection_id()); 
-let $a= `select a from t1`;
-flush logs;
+FLUSH LOGS;
+CREATE TABLE t1(a INT);
+INSERT INTO t1 VALUES(connection_id());
+let $a= `SELECT a FROM t1`;
+FLUSH LOGS;
 --exec $MYSQL_BINLOG $MYSQLTEST_VARDIR/log/master-bin.000013 > $MYSQLTEST_VARDIR/tmp/bug29928.sql
-drop table t1;
-connect (con1, localhost, root, , test);                                            
+DROP TABLE t1;
+connect (con1, localhost, root, , test);
 connection con1;
 --exec $MYSQL test < $MYSQLTEST_VARDIR/tmp/bug29928.sql
 --remove_file $MYSQLTEST_VARDIR/tmp/bug29928.sql
-let $b= `select a from t1`;
+let $b= `SELECT a FROM t1`;
 disconnect con1;
 connection default;
-let $c= `select $a=$b`;
+let $c= `SELECT $a=$b`;
 --echo $c
-drop table t1;
+DROP TABLE t1;
 
 echo shell> mysqlbinlog std_data/corrupt-relay-bin.000624 > var/tmp/bug31793.sql;
 error 1;
 exec $MYSQL_BINLOG $MYSQL_TEST_DIR/std_data/corrupt-relay-bin.000624 > $MYSQLTEST_VARDIR/tmp/bug31793.sql;
+remove_file $MYSQLTEST_VARDIR/tmp/bug31793.sql;
 
 #
-# Bug #37313  	BINLOG Contains Incorrect server id
+# Bug#37313 BINLOG Contains Incorrect server id
 #
 
-let $save_server_id= `select @@global.server_id`;
-let $s_id_max=`select (1 << 32) - 1`;
-eval set @@global.server_id= $s_id_max;
+let $binlog_file=  $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog;
+let $save_server_id= `SELECT @@global.server_id`;
+let $s_id_max= `SELECT (1 << 32) - 1`;
+eval SET @@global.server_id= $s_id_max;
 
-reset master;
-flush logs;
---exec $MYSQL_BINLOG $MYSQLTEST_VARDIR/log/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog
+RESET MASTER;
+FLUSH LOGS;
+--exec $MYSQL_BINLOG $MYSQLTEST_VARDIR/log/master-bin.000001 > $binlog_file
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-eval select
-(@a:=load_file("$MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
-is not null;
-let $s_id_unsigned= `select @a like "%server id $s_id_max%" /* must return 1 */`;
+eval SELECT
+(@a:=LOAD_FILE("$binlog_file"))
+IS NOT NULL;
+let $s_id_unsigned= `SELECT @a LIKE "%server id $s_id_max%" /* must return 1 */`;
 echo *** Unsigned server_id $s_id_max is found: $s_id_unsigned ***;
 
-eval set @@global.server_id= $save_server_id;
---remove_file $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog
+eval SET @@global.server_id= $save_server_id;
+--remove_file $binlog_file
 
 --echo End of 5.0 tests

mysql-test/t/mysqltest.test

@@ -6,6 +6,9 @@
 # This test uses chmod, can't be run with root permissions
 -- source include/not_as_root.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 # ============================================================================
 #
 # Test of mysqltest itself
@@ -50,7 +53,7 @@ select otto from (select 1 as otto) as t1;
 
 # ----------------------------------------------------------------------------
 # Negative case(statement):
-# The derived table t1 does not contain a column named 'friedrich' . 
+# The derived table t1 does not contain a column named 'friedrich' .
 # --> ERROR 42S22: Unknown column 'friedrich' in 'field list and
 # --> 1054: Unknown column 'friedrich' in 'field list'
 # ----------------------------------------------------------------------------
@@ -117,7 +120,7 @@ select friedrich from (select 1 as otto) as t1;
 # $mysql_errno is a builtin variable of mysqltest and contains the return code
 # of the last command sent to the server.
 #
-#      The following test cases often initialize $mysql_errno to 1064 by 
+#      The following test cases often initialize $mysql_errno to 1064 by
 #      a command with wrong syntax.
 #      Example: --error 1064      To prevent the abort after the error.
 #               garbage ;
@@ -481,7 +484,7 @@ remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
 
 # Allow trailing # comment
 --sleep 1 # Wait for insert delayed to be executed.
---sleep 1 	 # Wait for insert delayed to be executed.
+--sleep 1        # Wait for insert delayed to be executed.
 
 # ----------------------------------------------------------------------------
 # Test error
@@ -1382,7 +1385,7 @@ connection default;
 
 
 # ----------------------------------------------------------------------------
-# TODO Test queries, especially their errormessages... so it's easy to debug 
+# TODO Test queries, especially their errormessages... so it's easy to debug
 # new scripts and diagnose errors
 # ----------------------------------------------------------------------------
 
@@ -1424,7 +1427,7 @@ let $message= `SELECT USER()`;
 
 # The message contains more then 80 characters on multiple lines
 # and is kept between double quotes.
-let $message= 
+let $message=
 "Here comes a very very long message that
     - is longer then 80 characters    and
     - consists of several lines";
@@ -1534,7 +1537,7 @@ remove_file $MYSQLTEST_VARDIR/log/bug11731.log;
 remove_file $MYSQLTEST_VARDIR/tmp/bug11731.sql;
 
 #
-# Bug#19890  	mysqltest: "query" command is broken
+# Bug#19890 mysqltest: "query" command is broken
 #
 
 # It should be possible to use the command "query" to force mysqltest to
@@ -1560,7 +1563,7 @@ select "at" as col1, "c" as col2;
 select "at" as col1, "AT" as col2, "c" as col3;
 
 --replace_regex /a/b/ /ct/d/
-select "a" as col1, "ct" as col2; 
+select "a" as col1, "ct" as col2;
 
 --replace_regex /(strawberry)/raspberry and \1/ /blueberry/blackberry/ /potato/tomato/;
 select "strawberry","blueberry","potato";
@@ -1578,7 +1581,7 @@ select "strawberry","blueberry","potato";
 --error 1
 --exec echo "--replace_regex /a b c" | $MYSQL_TEST 2>&1
 --error 1
---exec echo "replace_regex /a /b c ;" | $MYSQL_TEST 2>&1 
+--exec echo "replace_regex /a /b c ;" | $MYSQL_TEST 2>&1
 
 # REQUIREMENT
 #   replace_regex should replace substitutions from left to right in output
@@ -1948,7 +1951,7 @@ SELECT '2' as "my_col1",2 as "my_col2"
 UNION
 SELECT '1',1 from t2;
 
-# 9. Ensure that several result formatting options including "sorted_result" 
+# 9. Ensure that several result formatting options including "sorted_result"
 #    - have all an effect
 #    - "--sorted_result" does not need to be direct before the statement
 #    - Row sorting is applied after modification of the column content
@@ -2154,3 +2157,5 @@ rmdir $MYSQLTEST_VARDIR/tmp/testdir;
 
 --echo End of tests
 
+# Wait till we reached the initial number of concurrent sessions
+--source include/wait_until_count_sessions.inc

mysql-test/t/read_only.test

@@ -4,6 +4,9 @@
 # should work with embedded server after mysqltest is fixed
 -- source include/not_embedded.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 --disable_warnings
 DROP TABLE IF EXISTS t1,t2,t3;
 --enable_warnings
@@ -40,24 +43,24 @@ connection con1;
 
 select @@global.read_only;
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 create table t3 (a int);
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 insert into t1 values(1);
 
 # if a statement, after parse stage, looks like it will update a
 # non-temp table, it will be rejected, even if at execution it would
 # have turned out that 0 rows would be updated
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 update t1 set a=1 where 1=0;
 
 # multi-update is special (see sql_parse.cc) so we test it
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 update t1,t2 set t1.a=t2.a+1 where t1.a=t2.a;
 
 # check multi-delete to be sure
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 delete t1,t2 from t1,t2 where t1.a=t2.a;
 
 # With temp tables updates should be accepted:
@@ -71,7 +74,7 @@ insert into t3 values(1);
 insert into t4 select * from t3;
 
 # a non-temp table updated:
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 update t1,t3 set t1.a=t3.a+1 where t1.a=t3.a;
 
 # no non-temp table updated (just swapped):
@@ -79,7 +82,7 @@ update t1,t3 set t3.a=t1.a+1 where t1.a=t3.a;
 
 update t4,t3 set t4.a=t3.a+1 where t4.a=t3.a;
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 delete t1 from t1,t3 where t1.a=t3.a;
 
 delete t3 from t1,t3 where t1.a=t3.a;
@@ -98,11 +101,11 @@ delete t1 from t1,t3 where t1.a=t3.a;
 
 drop table t1;
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 insert into t1 values(1);
 
 #
-# BUG #22077 "DROP TEMPORARY TABLE fails with wrong error if read_only is set"
+# Bug#22077 DROP TEMPORARY TABLE fails with wrong error if read_only is set
 #
 # check if DROP TEMPORARY on a non-existing temporary table returns the right
 # error
@@ -114,11 +117,12 @@ drop temporary table ttt;
 drop temporary table if exists ttt;
 
 connection default;
+disconnect con1;
 drop table t1,t2;
 drop user test@localhost;
 
 --echo #
---echo # Bug #27440 read_only allows create and drop database
+--echo # Bug#27440 read_only allows create and drop database
 --echo #
 --disable_warnings
 drop database if exists mysqltest_db1;
@@ -151,3 +155,7 @@ delete from mysql.columns_priv where User like 'mysqltest_%';
 flush privileges;
 drop database mysqltest_db1;
 set global read_only=0;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/show_check.test

 # Uses GRANT commands that usually disabled in embedded server
 -- source include/not_embedded.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 #
 # Test of some show commands
 #
@@ -33,7 +36,7 @@ check table t1 medium;
 check table t1 extended;
 show index from t1;
 --disable_metadata
---error 1062
+--error ER_DUP_ENTRY
 insert into t1 values (5,5,5);
 
 --echo -- Here we enable metadata just to check that the collation of the
@@ -191,14 +194,14 @@ show columns from t1;
 drop table t1;
 
 #
-# Test for Bug #2593 "SHOW CREATE TABLE doesn't properly double quotes"
+# Test for Bug#2593 SHOW CREATE TABLE doesn't properly double quotes
 #
 
 SET @old_sql_mode= @@sql_mode, sql_mode= '';
 SET @old_sql_quote_show_create= @@sql_quote_show_create, sql_quote_show_create= OFF;
 
 ######### hook for WL#1324 #
---error 1103
+--error ER_WRONG_TABLE_NAME
 CREATE TABLE `a/b` (i INT);
 # the above test should WORK when WL#1324 is done,
 # it should be removed and
@@ -224,7 +227,7 @@ CREATE TABLE `a/b` (i INT);
 #SHOW CREATE TABLE """a";
 #DROP TABLE """a";
 #
-#Bug #4374 SHOW TABLE STATUS FROM ignores collation_connection
+#Bug#4374 SHOW TABLE STATUS FROM ignores collation_connection
 #set names latin1;
 #create database ``;
 #create table ``.`` (a int) engine=heap;
@@ -252,7 +255,7 @@ SET sql_quote_show_create= @old_sql_quote_show_create;
 SET sql_mode= @old_sql_mode;
 
 #
-# Test for bug #2719 "Heap tables status shows wrong or missing data."
+# Test for Bug#2719 Heap tables status shows wrong or missing data.
 #
 
 select @@max_heap_table_size;
@@ -313,7 +316,7 @@ show table status;
 drop table t1, t2, t3;
 
 #
-# Test for bug #3342 SHOW CREATE DATABASE seems to require DROP privilege
+# Test for Bug#3342 SHOW CREATE DATABASE seems to require DROP privilege
 #
 
 create database mysqltest;
@@ -328,36 +331,39 @@ connect (con1,localhost,mysqltest_1,,mysqltest);
 connection con1;
 select * from t1;
 show create database mysqltest;
---error 1142
+--error ER_TABLEACCESS_DENIED_ERROR
 drop table t1;
---error 1044
+--error ER_DBACCESS_DENIED_ERROR
 drop database mysqltest;
+disconnect con1;
 
 connect (con2,localhost,mysqltest_2,,test);
 connection con2;
---error 1142
+--error ER_TABLEACCESS_DENIED_ERROR
 select * from mysqltest.t1;
---error 1044
+--error ER_DBACCESS_DENIED_ERROR
 show create database mysqltest;
---error 1142
+--error ER_TABLEACCESS_DENIED_ERROR
 drop table mysqltest.t1;
---error 1044
+--error ER_DBACCESS_DENIED_ERROR
 drop database mysqltest;
+disconnect con2;
 
 connect (con3,localhost,mysqltest_3,,test);
 connection con3;
---error 1142
+--error ER_TABLEACCESS_DENIED_ERROR
 select * from mysqltest.t1;
---error 1044
+--error ER_DBACCESS_DENIED_ERROR
 show create database mysqltest;
 drop table mysqltest.t1;
 drop database mysqltest;
+disconnect con3;
 
 connection default;
 set names binary;
-delete from mysql.user 
+delete from mysql.user
 where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
-delete from mysql.db   
+delete from mysql.db
 where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
 flush privileges;
 
@@ -371,7 +377,7 @@ flush privileges;
 #drop database ``;
 
 # Test that USING <keytype> is always shown in SHOW CREATE TABLE when it was
-# specified during table creation, but not otherwise. (Bug #7235)
+# specified during table creation, but not otherwise. (Bug#7235)
 CREATE TABLE t1 (i int, KEY (i)) ENGINE=MEMORY;
 SHOW CREATE TABLE t1;
 DROP TABLE t1;
@@ -402,7 +408,7 @@ ALTER TABLE t1 ENGINE=MEMORY;
 SHOW CREATE TABLE t1;
 DROP TABLE t1;
 
-# Test for BUG#9439 "Reporting wrong datatype for sub_part on show index"
+# Test for Bug#9439 Reporting wrong datatype for sub_part on show index
 CREATE TABLE t1(
   field1 text NOT NULL,
   PRIMARY KEY(field1(1000))
@@ -412,7 +418,7 @@ show index from t1;
 --disable_metadata
 drop table t1;
 
-# Test for BUG#11635: mysqldump exports TYPE instead of USING for HASH
+# Test for Bug#11635 mysqldump exports TYPE instead of USING for HASH
 create table t1 (
   c1 int NOT NULL,
   c2 int NOT NULL,
@@ -422,7 +428,7 @@ create table t1 (
 SHOW CREATE TABLE t1;
 DROP TABLE t1;
 
-# Test for BUG#93: 4.1 protocl crash on corupted frm and SHOW TABLE STATUS
+# Test for Bug#93 4.1 protocl crash on corupted frm and SHOW TABLE STATUS
 
 flush tables;
 
@@ -430,7 +436,7 @@ flush tables;
 system echo "this is a junk file for test" >> $MYSQLTEST_VARDIR/master-data/test/t1.frm ;
 --replace_column 6 # 7 # 8 # 9 #
 SHOW TABLE STATUS like 't1';
---error 1033
+--error ER_NOT_FORM_FILE
 show create table t1;
 drop table t1;
 
@@ -438,7 +444,7 @@ drop table t1;
 --echo End of 4.1 tests
 
 #
-# BUG 12183 -  SHOW OPEN TABLES behavior doesn't match grammar
+# Bug#12183 SHOW OPEN TABLES behavior doesn't match grammar
 # First we close all open tables with FLUSH tables and then we open some.
 CREATE TABLE txt1(a int);
 CREATE TABLE tyt2(a int);
@@ -456,14 +462,14 @@ DROP TABLE txt1;
 DROP TABLE tyt2;
 DROP TABLE urkunde;
 #
-# BUG #12591 (SHOW TABLES FROM dbname produces wrong error message)
+# Bug#12591 SHOW TABLES FROM dbname produces wrong error message
 #
---error 1049
+--error ER_BAD_DB_ERROR
 SHOW TABLES FROM non_existing_database;
 
 
 #
-# Bug#17203: "sql_no_cache sql_cache" in views created from prepared
+# Bug#17203 "sql_no_cache sql_cache" in views created from prepared
 # statement
 #
 # The problem was that initial user setting was forgotten, and current
@@ -543,7 +549,7 @@ SHOW COLUMNS FROM no_such_table;
 
 
 #
-# Bug #19764: SHOW commands end up in the slow log as table scans
+# Bug#19764 SHOW commands end up in the slow log as table scans
 #
 flush status;
 show status like 'slow_queries';
@@ -555,8 +561,8 @@ select 1 from information_schema.tables limit 1;
 show status like 'slow_queries';
 
 #
-# BUG#10491: Server returns data as charset binary SHOW CREATE TABLE or SELECT
-# FROM I_S.
+# BUG#10491 Server returns data as charset binary SHOW CREATE TABLE or SELECT
+#           FROM I_S.
 #
 
 #
@@ -671,7 +677,7 @@ SHOW TRIGGERS LIKE 't1';
 
 --echo ----------------------------------------------------------------
 
-SELECT 
+SELECT
   TRIGGER_CATALOG,
   TRIGGER_SCHEMA,
   TRIGGER_NAME,
@@ -827,7 +833,7 @@ DROP DATABASE mysqltest1;
 use test;
 
 #
-# Bug #28808: log_queries_not_using_indexes variable dynamic change is ignored
+# Bug#28808 log_queries_not_using_indexes variable dynamic change is ignored
 #
 flush status;
 show variables like "log_queries_not_using_indexes";
@@ -843,7 +849,7 @@ select 1 from information_schema.tables limit 1;
 show status like 'slow_queries';
 
 #
-# Bug #30088: Can't disable myisam-recover by a value of ""
+# Bug#30088 Can't disable myisam-recover by a value of ""
 #
 show variables like 'myisam_recover_options';
 
@@ -868,3 +874,7 @@ show create table t1;
 drop table t1;
 
 --echo End of 5.0 tests
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/skip_name_resolve.test

 # Can't be tested with embedded server
--- source include/not_embedded.inc
+--source include/not_embedded.inc
 
-# Bug #8471: IP address with mask fail when skip-name-resolve is on
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
+# Bug#8471 IP address with mask fail when skip-name-resolve is on
 GRANT ALL ON test.* TO mysqltest_1@'127.0.0.1/255.255.255.255';
 SHOW GRANTS FOR mysqltest_1@'127.0.0.1/255.255.255.255';
 REVOKE ALL ON test.* FROM mysqltest_1@'127.0.0.1/255.255.255.255';
@@ -9,12 +12,17 @@ DROP USER mysqltest_1@'127.0.0.1/255.255.255.255';
 
 # End of 4.1 tests
 
-# Bug #13407 "Remote connecting crashes server".
+# Bug#13407 Remote connecting crashes server
 # Server crashed when one used USER() function in connection for which
 # was impossible to obtain peer hostname.
 connect (con1, 127.0.0.1, root, , test, $MASTER_MYPORT, );
 --replace_column 1 #
-select user();
+SELECT USER();
 --replace_column 1 <id> 3 <host> 5 <command> 6 <time> 7 <state> 8 <info>
-show processlist;
+SHOW PROCESSLIST;
 connection default;
+disconnect con1;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/sp-security.test

@@ -5,6 +5,9 @@
 # Can't test with embedded server that doesn't support grants
 -- source include/not_embedded.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 connect (con1root,localhost,root,,);
 
 connection con1root;
@@ -156,7 +159,7 @@ call db1_secret.stamp(6);
 select db1_secret.db();
 
 #
-# BUG#2777
+# Bug#2777 Stored procedure doesn't observe definer's rights
 #
 
 connection con1root;
@@ -215,7 +218,7 @@ call q();
 select * from t2;
 
 #
-# BUG#6030: Stored procedure has no appropriate DROP privilege
+# Bug#6030 Stored procedure has no appropriate DROP privilege
 # (or ALTER for that matter)
 
 # still connection con2user1 in db2
@@ -330,7 +333,7 @@ flush privileges;
 drop table t1;
 
 #
-# BUG#9503: reseting correct parameters of thread after error in SP function
+# Bug#9503 reseting correct parameters of thread after error in SP function
 #
 connect (root,localhost,root,,test);
 connection root;
@@ -366,10 +369,12 @@ REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1@localhost;
 drop function bug_9503;
 use test;
 drop database mysqltest;
+connection default;
+disconnect root;
 
 #
 # correct value from current_user() in function run from "security definer"
-# (BUG#7291)
+# (Bug#7291 Stored procedures: wrong CURRENT_USER value)
 #
 connection con1root;
 use test;
@@ -398,10 +403,10 @@ REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1@localhost;
 drop user user1@localhost;
 
 #
-# Bug #12318: Wrong error message when accessing an inaccessible stored
+# Bug#12318 Wrong error message when accessing an inaccessible stored
 # procedure in another database when the current database is
 # information_schema.
-# 
+#
 
 --disable_warnings
 drop database if exists mysqltest_1;
@@ -438,7 +443,7 @@ revoke usage on *.* from mysqltest_1@localhost;
 drop user mysqltest_1@localhost;
 
 #
-# BUG#12812 create view calling a function works without execute right
+# Bug#12812 create view calling a function works without execute right
 #           on function
 delimiter |;
 --disable_warnings
@@ -464,7 +469,7 @@ delimiter ;|
 
 
 #
-# BUG#14834: Server denies to execute Stored Procedure
+# Bug#14834 Server denies to execute Stored Procedure
 #
 # The problem here was with '_' in the database name.
 #
@@ -507,7 +512,7 @@ drop database db_bug14834;
 
 
 #
-# BUG#14533: 'desc tbl' in stored procedure causes error
+# Bug#14533 'desc tbl' in stored procedure causes error
 # ER_TABLEACCESS_DENIED_ERROR
 #
 create database db_bug14533;
@@ -546,20 +551,20 @@ drop database db_bug14533;
 
 
 #
-# BUG#7787: Stored procedures: improper warning for "grant execute" statement
+# Bug#7787 Stored procedures: improper warning for "grant execute" statement
 #
 
 # Prepare.
 
 CREATE DATABASE db_bug7787;
-use db_bug7787;
+USE db_bug7787;
 
 # Test.
 
 CREATE PROCEDURE p1()
-  SHOW INNODB STATUS; 
+  SHOW INNODB STATUS;
 
-GRANT EXECUTE ON PROCEDURE p1 TO user_bug7787@localhost; 
+GRANT EXECUTE ON PROCEDURE p1 TO user_bug7787@localhost;
 
 # Cleanup.
 
@@ -569,7 +574,7 @@ use test;
 
 
 #
-# WL#2897: Complete definer support in the stored routines.
+# WL#2897 Complete definer support in the stored routines.
 #
 # The following cases are tested:
 #   1. check that if DEFINER-clause is not explicitly specified, stored routines
@@ -614,7 +619,7 @@ GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
 --echo ---> connection: mysqltest_2_con
 --connection mysqltest_2_con
 
-use mysqltest;
+USE mysqltest;
 
 CREATE PROCEDURE wl2897_p1() SELECT 1;
 
@@ -626,7 +631,7 @@ CREATE FUNCTION wl2897_f1() RETURNS INT RETURN 1;
 --echo ---> connection: mysqltest_1_con
 --connection mysqltest_1_con
 
-use mysqltest;
+USE mysqltest;
 
 --error ER_SPECIFIC_ACCESS_DENIED_ERROR
 CREATE DEFINER=root@localhost PROCEDURE wl2897_p2() SELECT 2;
@@ -652,7 +657,7 @@ CREATE DEFINER='a @ b @ c'@localhost FUNCTION wl2897_f3() RETURNS INT RETURN 3;
 --echo ---> connection: con1root
 --connection con1root
 
-use mysqltest;
+USE mysqltest;
 
 SHOW CREATE PROCEDURE wl2897_p1;
 SHOW CREATE PROCEDURE wl2897_p3;
@@ -672,7 +677,7 @@ DROP DATABASE mysqltest;
 
 
 #
-# BUG#13198: SP executes if definer does not exist
+# Bug#13198 SP executes if definer does not exist
 #
 
 # Prepare environment.
@@ -702,7 +707,7 @@ GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
 --echo ---> connection: mysqltest_1_con
 --connection mysqltest_1_con
 
-use mysqltest;
+USE mysqltest;
 
 CREATE PROCEDURE bug13198_p1()
   SELECT 1;
@@ -720,7 +725,7 @@ SELECT bug13198_f1();
 --echo ---> connection: mysqltest_2_con
 --connection mysqltest_2_con
 
-use mysqltest;
+USE mysqltest;
 
 CALL bug13198_p1();
 
@@ -742,7 +747,7 @@ DROP USER mysqltest_1@localhost;
 --echo ---> connection: mysqltest_2_con
 --connection mysqltest_2_con
 
-use mysqltest;
+USE mysqltest;
 
 --error ER_NO_SUCH_USER
 CALL bug13198_p1();
@@ -764,8 +769,8 @@ DROP DATABASE mysqltest;
 
 
 #
-# Bug#19857 - When a user with CREATE ROUTINE priv creates a routine,
-#             it results in NULL p/w
+# Bug#19857 When a user with CREATE ROUTINE priv creates a routine,
+#           it results in NULL p/w
 #
 
 # Can't test with embedded server that doesn't support grants
@@ -780,7 +785,7 @@ SELECT Host,User,Password FROM mysql.user WHERE User='user19857';
 --echo ---> connection: mysqltest_2_con
 --connection mysqltest_2_con
 
-use test;
+USE test;
 
 DELIMITER //;
   CREATE PROCEDURE sp19857() DETERMINISTIC
@@ -814,8 +819,7 @@ DROP USER user19857@localhost;
 
 
 #
-# BUG#18630: Arguments of suid routine calculated in wrong security
-# context
+# Bug#18630 Arguments of suid routine calculated in wrong security context
 #
 # Arguments of suid routines were calculated in definer's security
 # context instead of caller's context thus creating security hole.
@@ -886,3 +890,7 @@ DROP FUNCTION f_suid;
 DROP TABLE t1;
 
 --echo End of 5.0 tests.
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/sp_notembedded.test

 # Can't test with embedded server
 -- source include/not_embedded.inc
 
---sleep 2
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 --disable_warnings
 drop table if exists t1,t3;
 --enable_warnings
 delimiter |;
 
+
 #
-# BUG#4902: Stored procedure with SHOW WARNINGS leads to packet error
+# Bug#4902: Stored procedure with SHOW WARNINGS leads to packet error
 #
 # Added tests for show grants command
 --disable_warnings
@@ -47,7 +50,7 @@ drop procedure bug4902_2|
 
 
 #
-# BUG#5278: Stored procedure packets out of order if SET PASSWORD.
+# Bug#5278: Stored procedure packets out of order if SET PASSWORD.
 #
 --disable_warnings
 drop function if exists bug5278|
@@ -58,13 +61,16 @@ begin
   return 'okay';
 end|
 
---error 1133
+--error ER_PASSWORD_NO_MATCH
 select bug5278()|
---error 1133
+--error ER_PASSWORD_NO_MATCH
 select bug5278()|
 drop function bug5278|
 
 
+#
+# Bug#3583: query cache doesn't work for stored procedures
+#
 --disable_warnings
 drop table if exists t1|
 --enable_warnings
@@ -72,9 +78,6 @@ create table t1 (
 	id   char(16) not null default '',
         data int not null
 )|
-#
-# BUG#3583: query cache doesn't work for stored procedures
-#
 --disable_warnings
 drop procedure if exists bug3583|
 --enable_warnings
@@ -110,8 +113,9 @@ delete from t1|
 drop procedure bug3583|
 drop table t1|
 
+
 #
-# BUG#6807: Stored procedure crash if CREATE PROCEDURE ... KILL QUERY
+# Bug#6807: Stored procedure crash if CREATE PROCEDURE ... KILL QUERY
 #
 --disable_warnings
 drop procedure if exists bug6807|
@@ -125,16 +129,16 @@ begin
   select 'Not reached';
 end|
 
---error 1317
+--error ER_QUERY_INTERRUPTED
 call bug6807()|
---error 1317
+--error ER_QUERY_INTERRUPTED
 call bug6807()|
 
 drop procedure bug6807|
 
 
 #
-# BUG#10100: function (and stored procedure?) recursivity problem
+# Bug#10100: function (and stored procedure?) recursivity problem
 #
 --disable_warnings
 drop function if exists bug10100f|
@@ -233,11 +237,11 @@ begin
   close c;
 end|
 
-#end of the stack checking
+# end of the stack checking
 set @@max_sp_recursion_depth=255|
 set @var=1|
-#disable log because error about stack overrun contains numbers which
-#depend on a system
+# disable log because error about stack overrun contains numbers which
+# depend on a system
 -- disable_result_log
 -- error ER_STACK_OVERRUN_NEED_MORE
 call bug10100p(255, @var)|
@@ -266,6 +270,7 @@ drop table t3|
 
 delimiter ;|
 
+
 #
 # Bug#15298 SHOW GRANTS FOR CURRENT_USER: Incorrect output in DEFINER context
 #
@@ -282,6 +287,11 @@ call 15298_1();
 call 15298_2();
 
 connection default;
+disconnect con1;
 drop user mysqltest_1@localhost;
 drop procedure 15298_1;
 drop procedure 15298_2;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/ssl-big.test

@@ -4,12 +4,15 @@
 -- source include/have_ssl.inc
 -- source include/big_test.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 --disable_warnings
 DROP TABLE IF EXISTS t1, t2;
 --enable_warnings
 
 #
-# Bug #29579 Clients using SSL can hang the server
+# Bug#29579 Clients using SSL can hang the server
 #
 
 connect (ssl_con,localhost,root,,,,,SSL);
@@ -18,7 +21,7 @@ create table t1 (a int);
 
 disconnect ssl_con;
 
-  
+
 --disable_query_log
 --disable_result_log
 
@@ -26,31 +29,36 @@ let $count= 2000;
 while ($count)
 {
   connect (ssl_con,localhost,root,,,,,SSL);
-  
+
   eval insert into t1 values ($count);
   dec $count;
-  
-  # This select causes the net buffer to fill as the server sends the results 
+
+  # This select causes the net buffer to fill as the server sends the results
   # but the client doesn't reap the results. The results are larger each time
   # through the loop, so that eventually the buffer is completely full
   # at the exact moment the server attempts to the close the connection with
   # the lock held.
   send select * from t1;
-  
+
   # now send the quit the command so the server will initiate the shutdown.
-  send_quit ssl_con; 
-  
+  send_quit ssl_con;
+
   # if the server is hung, this will hang too:
   connect (ssl_con2,localhost,root,,,,,SSL);
-  
+
   # no hang if we get here, close and retry
   disconnect ssl_con2;
   disconnect ssl_con;
-}  
+}
 --enable_query_log
 --enable_result_log
 
 connect (ssl_con,localhost,root,,,,,SSL);
 
 drop table t1;
+connection default;
+disconnect ssl_con;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
 

mysql-test/t/ssl.test

@@ -3,6 +3,9 @@
 
 -- source include/have_ssl.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 connect (ssl_con,localhost,root,,,,,SSL);
 
 # Check ssl turned on
@@ -14,4 +17,9 @@ SHOW STATUS LIKE 'Ssl_cipher';
 # Check ssl turned on
 SHOW STATUS LIKE 'Ssl_cipher';
 
+connection default;
+disconnect ssl_con;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
 

mysql-test/t/ssl_compress.test

@@ -4,6 +4,9 @@
 -- source include/have_ssl.inc
 -- source include/have_compress.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 connect (ssl_compress_con,localhost,root,,,,,SSL COMPRESS);
 
 # Check ssl turned on
@@ -20,3 +23,10 @@ SHOW STATUS LIKE 'Ssl_cipher';
 
 # Check compression turned on
 SHOW STATUS LIKE 'Compression';
+
+connection default;
+disconnect ssl_compress_con;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/status.test

 # embedded server causes different stat
 -- source include/not_embedded.inc
 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
 # PS causes different statistics
 --disable_ps_protocol
 
@@ -208,3 +211,7 @@ DROP PROCEDURE p1;
 DROP FUNCTION f1;
 
 # End of 5.0 tests
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/user_limits.test

@@ -3,9 +3,12 @@
 #
 
 # Requires privileges to be enabled
--- source include/not_embedded.inc
+--source include/not_embedded.inc
 
-# Prepare play-ground 
+# Save the initial number of concurrent sessions
+--source include/count_sessions.inc
+
+# Prepare play-ground
 --disable_warnings
 drop table if exists t1;
 --enable_warnings
@@ -28,11 +31,11 @@ connect (mqph, localhost, mysqltest_1,,);
 connection mqph;
 select * from t1;
 select * from t1;
---error 1226
+--error ER_USER_LIMIT_REACHED
 select * from t1;
 connect (mqph2, localhost, mysqltest_1,,);
 connection mqph2;
---error 1226
+--error ER_USER_LIMIT_REACHED
 select * from t1;
 # cleanup
 connection default;
@@ -50,12 +53,12 @@ select * from t1;
 select * from t1;
 delete from t1;
 delete from t1;
---error 1226
+--error ER_USER_LIMIT_REACHED
 delete from t1;
 select * from t1;
 connect (muph2, localhost, mysqltest_1,,);
 connection muph2;
---error 1226
+--error ER_USER_LIMIT_REACHED
 delete from t1;
 select * from t1;
 # Cleanup
@@ -74,7 +77,7 @@ connect (mcph2, localhost, mysqltest_1,,);
 connection mcph2;
 select * from t1;
 --replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
---error 1226
+--error ER_USER_LIMIT_REACHED
 connect (mcph3, localhost, mysqltest_1,,);
 # Old connection is still ok
 select * from t1;
@@ -83,7 +86,7 @@ select * from t1;
 disconnect mcph1;
 disconnect mcph2;
 --replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
---error 1226
+--error ER_USER_LIMIT_REACHED
 connect (mcph3, localhost, mysqltest_1,,);
 # Cleanup
 connection default;
@@ -101,13 +104,13 @@ connect (muc2, localhost, mysqltest_1,,);
 connection muc2;
 select * from t1;
 --replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
---error 1226
+--error ER_USER_LIMIT_REACHED
 connect (muc3, localhost, mysqltest_1,,);
 # Closing of one of connections should help
 disconnect muc1;
 connect (muc3, localhost, mysqltest_1,,);
 select * from t1;
-# Changing of limit should also help (and immediately) 
+# Changing of limit should also help (and immediately)
 connection default;
 grant usage on *.* to mysqltest_1@localhost with max_user_connections 3;
 flush user_resources;
@@ -115,7 +118,7 @@ connect (muc4, localhost, mysqltest_1,,);
 connection muc4;
 select * from t1;
 --replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
---error 1226
+--error ER_USER_LIMIT_REACHED
 connect (muc5, localhost, mysqltest_1,,);
 # Clean up
 connection default;
@@ -129,10 +132,10 @@ drop user mysqltest_1@localhost;
 select @@session.max_user_connections, @@global.max_user_connections;
 # Local max_user_connections variable can't be set directly
 # since this limit is per-account
---error 1229
-set session max_user_connections= 2; 
+--error ER_GLOBAL_VARIABLE
+set session max_user_connections= 2;
 # But it is ok to set global max_user_connections
-set global max_user_connections= 2; 
+set global max_user_connections= 2;
 select @@session.max_user_connections, @@global.max_user_connections;
 # Let us check that global limit works
 grant usage on *.* to mysqltest_1@localhost;
@@ -144,7 +147,7 @@ connect (muca2, localhost, mysqltest_1,,);
 connection muca2;
 select * from t1;
 --replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
---error 1203
+--error ER_TOO_MANY_USER_CONNECTIONS
 connect (muca3, localhost, mysqltest_1,,);
 # Now we are testing that per-account limit prevails over gloabl limit
 connection default;
@@ -154,16 +157,20 @@ connect (muca3, localhost, mysqltest_1,,);
 connection muca3;
 select @@session.max_user_connections, @@global.max_user_connections;
 --replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
---error 1226
+--error ER_USER_LIMIT_REACHED
 connect (muca4, localhost, mysqltest_1,,);
 # Cleanup
 connection default;
 disconnect muca1;
 disconnect muca2;
 disconnect muca3;
-set global max_user_connections= 0; 
+set global max_user_connections= 0;
 drop user mysqltest_1@localhost;
 --enable_ps_protocol
 
 # Final cleanup
 drop table t1;
+
+# Wait till all disconnects are completed
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/wait_timeout.test

@@ -2,7 +2,7 @@
 -- source include/not_embedded.inc
 
 #
-# Bug #8731: wait_timeout does not work on Mac OS X
+# Bug#8731 wait_timeout does not work on Mac OS X
 #
 
 
@@ -87,6 +87,7 @@ while (!`select @aborted_clients`)
   }
 }
 --enable_query_log
+disconnect wait_con;
 
 connection con1;
 # When the connection is closed in this way, the error code should
@@ -97,3 +98,5 @@ select 2;
 --enable_reconnect
 select 3;
 disconnect con1;
+# The last connect is to keep tools checking the current test happy.
+connect (default,localhost,root,,test,,);