Fix paths MYSQLTEST_VARDIR/master-data -> MYSQLD_DATADIR

mysql-test/suite/parts/inc/partition_check_drop.inc

@@ -21,15 +21,19 @@ if ($no_debug)
    --disable_query_log
 }
 
+# Get the MySQL Servers datadir without ending slash
+let $MYSQLD_DATADIR= `select LEFT(@@datadir, LENGTH(@@datadir)-1)`;
+#echo MYSQLD_DATADIR: $MYSQLD_DATADIR;
+
 if ($do_file_tests)
 {
 # List the files belonging to the table t1
---exec ls $MYSQLTEST_VARDIR/master-data/test/t1* > $MYSQLTEST_VARDIR/master-data/test/tmp2 || true
+--exec ls $MYSQLD_DATADIR/test/t1* > $MYSQLD_DATADIR/test/tmp2 || true
 if ($with_directories)
 {
---exec ls $MYSQLTEST_VARDIR/tmp/t1* >> $MYSQLTEST_VARDIR/master-data/test/tmp2 || true
+--exec ls $MYSQLTEST_VARDIR/tmp/t1* >> $MYSQLD_DATADIR/test/tmp2 || true
 }
-eval SET @aux = CONCAT('load_file(''$MYSQLTEST_VARDIR','/master-data/test/tmp2'')');
+eval SET @aux = CONCAT('load_file(''$MYSQLD_DATADIR','/test/tmp2'')');
 let $file_list= `SELECT @aux`;
 }
 if (!$do_file_tests)
@@ -61,7 +65,7 @@ if ($found_garbage)
    }
    # Do a manual cleanup, because the following tests should not suffer from
    # remaining files
-   --exec rm -f $MYSQLTEST_VARDIR/master-data/test/t1* || true
+   --exec rm -f $MYSQLD_DATADIR/test/t1* || true
    if ($with_directories)
    {
 	   --exec rm -f $MYSQLTEST_VARDIR/tmp/t1* || true

mysql-test/suite/parts/inc/partition_layout.inc

@@ -9,6 +9,7 @@ eval SHOW CREATE TABLE t1;
 # listing of files belonging to the table t1
 if ($ls)
 {
-   --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-   --exec ls $MYSQLTEST_VARDIR/mysqld.1/data/test/t1*
+   let $MYSQLD_DATADIR= `select @@datadir`;
+   --replace_result $MYSQLD_DATADIR MYSQLD_DATADIR
+   --exec ls $MYSQLD_DATADIR/test/t1*
 }

mysql-test/suite/parts/inc/partition_layout_check1.inc

@@ -25,23 +25,27 @@ if ($no_debug)
 # Clean the table holding the definition of t1
 DELETE FROM t0_definition;
 
+# Get the MySQL Servers datadir without ending slash
+let $MYSQLD_DATADIR= `select LEFT(@@datadir, LENGTH(@@datadir)-1)`;
+#echo MYSQLD_DATADIR: $MYSQLD_DATADIR;
+
 # Dump the current definition of the table t1 to tmp1
 # This complicated method - let another mysqltest collect the output - is used
 # because of two reasons
 # - SHOW CREATE TABLE t1 is at least currently most probably more reliable than
 #   the corresponding SELECT on the INFORMATION_SCHEMA
 # - SHOW CREATE TABLE .. cannot write its out put into a file like SELECT
---exec echo "SHOW CREATE TABLE t1;" | $MYSQL_TEST > $MYSQLTEST_VARDIR/master-data/test/tmp1 2>&1 || true
+--exec echo "SHOW CREATE TABLE t1;" | $MYSQL_TEST > $MYSQLD_DATADIR/test/tmp1 2>&1 || true
 if ($do_file_tests)
 {
 # List the files belonging to the table t1
---exec ls $MYSQLTEST_VARDIR/master-data/test/t1* > $MYSQLTEST_VARDIR/master-data/test/tmp2 2>&1 || true
+--exec ls $MYSQLD_DATADIR/test/t1* > $MYSQLD_DATADIR/test/tmp2 2>&1 || true
 if ($with_directories)
 {
---exec ls $MYSQLTEST_VARDIR/mysql-test-data-dir/t1* >> $MYSQLTEST_VARDIR/master-data/test/tmp2 2>&1 || true
---exec ls $MYSQLTEST_VARDIR/mysql-test-idx-dir/t1* >> $MYSQLTEST_VARDIR/master-data/test/tmp2 2>&1 || true
+--exec ls $MYSQLTEST_VARDIR/mysql-test-data-dir/t1* >> $MYSQLD_DATADIR/test/tmp2 2>&1 || true
+--exec ls $MYSQLTEST_VARDIR/mysql-test-idx-dir/t1* >> $MYSQLD_DATADIR/test/tmp2 2>&1 || true
 }
-eval SET @aux = CONCAT('load_file(''$MYSQLTEST_VARDIR','/master-data/test/tmp2''
+eval SET @aux = CONCAT('load_file(''$MYSQLD_DATADIR','/test/tmp2''
 )');
 let $file_list= `SELECT @aux`;
 }
@@ -52,7 +56,7 @@ let $file_list= '--- not determined ---';
 
 # Insert the current definition of the table t1 into t0_definition
 eval INSERT INTO t0_definition SET state = 'old',
-     create_command = load_file('$MYSQLTEST_VARDIR/master-data/test/tmp1'),
+     create_command = load_file('$MYSQLD_DATADIR/test/tmp1'),
      file_list      = $file_list;
 
 # Print the create table statement into the protocol
@@ -64,8 +68,8 @@ if ($do_file_tests)
    if ($ls)
    {
       # Print the list of files into the protocol
-      eval SELECT REPLACE(file_list,'$MYSQLTEST_VARDIR','\$MYSQLTEST_VARDIR')
-                  AS "unified filelist"
+      replace_result $MYSQLD_DATADIR MYSQLD_DATADIR $MYSQLTEST_VARDIR MYSQLTEST_VARDIR;
+      SELECT file_list AS "unified filelist"
        FROM t0_definition WHERE state = 'old';
    }
 }

mysql-test/suite/parts/inc/partition_layout_check2.inc

@@ -26,18 +26,23 @@ if ($no_debug)
 # Clean the table holding the definition of t1
 DELETE FROM t0_definition WHERE state = 'new';
 
+
+# Get the MySQL Servers datadir without ending slash
+let $MYSQLD_DATADIR= `select LEFT(@@datadir, LENGTH(@@datadir)-1)`;
+#echo MYSQLD_DATADIR: $MYSQLD_DATADIR;
+
 # Dump the current definition of the table t1 to tmp1
---exec echo "SHOW CREATE TABLE t1;" | $MYSQL_TEST > $MYSQLTEST_VARDIR/master-data/test/tmp1 2>&1 || true
+--exec echo "SHOW CREATE TABLE t1;" | $MYSQL_TEST > $MYSQLD_DATADIR/test/tmp1 2>&1 || true
 if ($do_file_tests)
 {
 # List the files belonging to the table t1
---exec ls $MYSQLTEST_VARDIR/master-data/test/t1* > $MYSQLTEST_VARDIR/master-data/test/tmp2 2>&1 || true
+--exec ls $MYSQLD_DATADIR/test/t1* > $MYSQLD_DATADIR/test/tmp2 2>&1 || true
 if ($with_directories)
 {
---exec ls $MYSQLTEST_VARDIR/mysql-test-data-dir/t1* >> $MYSQLTEST_VARDIR/master-data/test/tmp2 2>&1 || true
---exec ls $MYSQLTEST_VARDIR/mysql-test-idx-dir/t1* >> $MYSQLTEST_VARDIR/master-data/test/tmp2 2>&1 || true
+--exec ls $MYSQLTEST_VARDIR/mysql-test-data-dir/t1* >> $MYSQLD_DATADIR/test/tmp2 2>&1 || true
+--exec ls $MYSQLTEST_VARDIR/mysql-test-idx-dir/t1* >> $MYSQLD_DATADIR/test/tmp2 2>&1 || true
 }
-eval SET @aux = CONCAT('load_file(''$MYSQLTEST_VARDIR','/master-data/test/tmp2'')');
+eval SET @aux = CONCAT('load_file(''$MYSQLD_DATADIR','/test/tmp2'')');
 let $file_list= `SELECT @aux`;
 }
 if (!$do_file_tests)
@@ -47,7 +52,7 @@ let $file_list= '--- not determined ---';
 
 # Insert the current definition of the table t1 into t0_definition
 eval INSERT INTO t0_definition SET state = 'new',
-     create_command = load_file('$MYSQLTEST_VARDIR/master-data/test/tmp1'),
+     create_command = load_file('$MYSQLD_DATADIR/test/tmp1'),
      file_list      = $file_list;
 
 # Print the old and new table layout, if they differ

mysql-test/suite/parts/t/partition_basic_symlink_innodb.test

@@ -35,6 +35,9 @@
 --disable_warnings
 DROP TABLE IF EXISTS t1;
 --enable_warnings
+
+let $MYSQLD_DATADIR= `select @@datadir`;
+
 --mkdir $MYSQLTEST_VARDIR/mysql-test-data-dir
 --mkdir $MYSQLTEST_VARDIR/mysql-test-idx-dir
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
@@ -49,17 +52,17 @@ PARTITION BY HASH (c1)
  INDEX DIRECTORY = '$MYSQLTEST_VARDIR/mysql-test-idx-dir'
 );
 --echo # Verifying .frm and .par files
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1.frm
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1.par
+--file_exists $MYSQLD_DATADIR/test/t1.frm
+--file_exists $MYSQLD_DATADIR/test/t1.par
 --echo # Verifying that there are no MyISAM files
 --error 1
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0.MYD
+--file_exists $MYSQLD_DATADIR/test/t1#P#p0.MYD
 --error 1
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0.MYI
+--file_exists $MYSQLD_DATADIR/test/t1#P#p0.MYI
 --error 1
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1.MYD
+--file_exists $MYSQLD_DATADIR/test/t1#P#p1.MYD
 --error 1
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1.MYI
+--file_exists $MYSQLD_DATADIR/test/t1#P#p1.MYI
 --error 1
 --file_exists $MYSQLTEST_VARDIR/mysql-test-data-dir/t1#P#p0.MYD
 --error 1
@@ -73,12 +76,12 @@ FLUSH TABLES;
 SHOW CREATE TABLE t1;
 ALTER TABLE t1 ENGINE = MyISAM;
 --echo # Verifying .frm, .par and MyISAM files (.MYD, MYI)
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1.frm
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1.par
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0.MYD
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0.MYI
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1.MYD
---file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1.MYI
+--file_exists $MYSQLD_DATADIR/test/t1.frm
+--file_exists $MYSQLD_DATADIR/test/t1.par
+--file_exists $MYSQLD_DATADIR/test/t1#P#p0.MYD
+--file_exists $MYSQLD_DATADIR/test/t1#P#p0.MYI
+--file_exists $MYSQLD_DATADIR/test/t1#P#p1.MYD
+--file_exists $MYSQLD_DATADIR/test/t1#P#p1.MYI
 --file_exists $MYSQLTEST_VARDIR/mysql-test-data-dir/t1#P#p0.MYD
 --file_exists $MYSQLTEST_VARDIR/mysql-test-idx-dir/t1#P#p0.MYI
 --file_exists $MYSQLTEST_VARDIR/mysql-test-data-dir/t1#P#p1.MYD