Merge branch 'zlib v1.3' into 10.4

zlib/ChangeLog

 
                 ChangeLog file for zlib
 
+Changes in 1.3 (18 Aug 2023)
+- Remove K&R function definitions and zlib2ansi
+- Fix bug in deflateBound() for level 0 and memLevel 9
+- Fix bug when gzungetc() is used immediately after gzopen()
+- Fix bug when using gzflush() with a very small buffer
+- Fix crash when gzsetparams() attempted for transparent write
+- Fix test/example.c to work with FORCE_STORED
+- Rewrite of zran in examples (see zran.c version history)
+- Fix minizip to allow it to open an empty zip file
+- Fix reading disk number start on zip64 files in minizip
+- Fix logic error in minizip argument processing
+- Add minizip testing to Makefile
+- Read multiple bytes instead of byte-by-byte in minizip unzip.c
+- Add memory sanitizer to configure (--memory)
+- Various portability improvements
+- Various documentation improvements
+- Various spelling and typo corrections
+
 Changes in 1.2.13 (13 Oct 2022)
 - Fix configure issue that discarded provided CC definition
 - Correct incorrect inputs provided to the CRC functions
@@ -1445,7 +1463,7 @@ Changes in 0.99 (27 Jan 96)
 - fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
 - in fcalloc, normalize pointer if size > 65520 bytes
 - don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc.
 - use Z_BINARY instead of BINARY
 - document that gzclose after gzdopen will close the file
 - allow "a" as mode in gzopen

zlib/FAQ

@@ -4,7 +4,7 @@
 
 If your question is not there, please check the zlib home page
 http://zlib.net/ which may have more recent information.
-The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
+The latest zlib FAQ is at http://zlib.net/zlib_faq.html
 
 
  1. Is zlib Y2K-compliant?

zlib/README

 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.13 is a general purpose data compression library.  All the code is
+zlib 1.3 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -29,18 +29,17 @@ PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
 
 Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
-http://marknelson.us/1997/01/01/zlib-engine/ .
+https://marknelson.us/posts/1997/01/01/zlib-engine.html .
 
-The changes made in version 1.2.13 are documented in the file ChangeLog.
+The changes made in version 1.3 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
-zlib is available in Java using the java.util.zip package, documented at
-http://java.sun.com/developer/technicalArticles/Programming/compression/ .
+zlib is available in Java using the java.util.zip package. Follow the API
+Documentation link at: https://docs.oracle.com/search/?q=java.util.zip .
 
-A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
-at CPAN (Comprehensive Perl Archive Network) sites, including
-http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
+A Perl interface to zlib and bzip2 written by Paul Marquess <pmqs@cpan.org>
+can be found at https://github.com/pmqs/IO-Compress .
 
 A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
 available in Python 1.5 and later versions, see
@@ -64,7 +63,7 @@ Notes for some targets:
 - zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
   when compiled with cc.
 
-- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+- On Digital Unix 4.0D (formerly OSF/1) on AlphaServer, the cc option -std1 is
   necessary to get gzprintf working correctly. This is done by configure.
 
 - zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
@@ -84,7 +83,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2022 Jean-loup Gailly and Mark Adler
+ (C) 1995-2023 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

zlib/adler32.c

@@ -7,8 +7,6 @@
 
 #include "zutil.h"
 
-local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
-
 #define BASE 65521U     /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
@@ -60,11 +58,7 @@ local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 #endif
 
 /* ========================================================================= */
-uLong ZEXPORT adler32_z(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    z_size_t len;
-{
+uLong ZEXPORT adler32_z(uLong adler, const Bytef *buf, z_size_t len) {
     unsigned long sum2;
     unsigned n;
 
@@ -131,20 +125,12 @@ uLong ZEXPORT adler32_z(adler, buf, len)
 }
 
 /* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
+uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len) {
     return adler32_z(adler, buf, len);
 }
 
 /* ========================================================================= */
-local uLong adler32_combine_(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2) {
     unsigned long sum1;
     unsigned long sum2;
     unsigned rem;
@@ -169,18 +155,10 @@ local uLong adler32_combine_(adler1, adler2, len2)
 }
 
 /* ========================================================================= */
-uLong ZEXPORT adler32_combine(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off_t len2;
-{
+uLong ZEXPORT adler32_combine(uLong adler1, uLong adler2, z_off_t len2) {
     return adler32_combine_(adler1, adler2, len2);
 }
 
-uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
+uLong ZEXPORT adler32_combine64(uLong adler1, uLong adler2, z_off64_t len2) {
     return adler32_combine_(adler1, adler2, len2);
 }

zlib/compress.c

@@ -19,13 +19,8 @@
    memory, Z_BUF_ERROR if there was not enough room in the output buffer,
    Z_STREAM_ERROR if the level parameter is invalid.
 */
-int ZEXPORT compress2(dest, destLen, source, sourceLen, level)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-    int level;
-{
+int ZEXPORT compress2(Bytef *dest, uLongf *destLen, const Bytef *source,
+                      uLong sourceLen, int level) {
     z_stream stream;
     int err;
     const uInt max = (uInt)-1;
@@ -65,12 +60,8 @@ int ZEXPORT compress2(dest, destLen, source, sourceLen, level)
 
 /* ===========================================================================
  */
-int ZEXPORT compress(dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
+int ZEXPORT compress(Bytef *dest, uLongf *destLen, const Bytef *source,
+                     uLong sourceLen) {
     return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
 }
 
@@ -78,9 +69,7 @@ int ZEXPORT compress(dest, destLen, source, sourceLen)
      If the default memLevel or windowBits for deflateInit() is changed, then
    this function needs to be updated.
  */
-uLong ZEXPORT compressBound(sourceLen)
-    uLong sourceLen;
-{
+uLong ZEXPORT compressBound(uLong sourceLen) {
     return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
            (sourceLen >> 25) + 13;
 }

zlib/deflate.h

@@ -291,14 +291,14 @@ typedef struct internal_state {
    memory checker errors from longest match routines */
 
         /* in trees.c */
-void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_init(deflate_state *s);
+int ZLIB_INTERNAL _tr_tally(deflate_state *s, unsigned dist, unsigned lc);
+void ZLIB_INTERNAL _tr_flush_block(deflate_state *s, charf *buf,
+                                   ulg stored_len, int last);
+void ZLIB_INTERNAL _tr_flush_bits(deflate_state *s);
+void ZLIB_INTERNAL _tr_align(deflate_state *s);
+void ZLIB_INTERNAL _tr_stored_block(deflate_state *s, charf *buf,
+                                    ulg stored_len, int last);
 
 #define d_code(dist) \
    ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])

zlib/gzclose.c

@@ -8,9 +8,7 @@
 /* gzclose() is in a separate file so that it is linked in only if it is used.
    That way the other gzclose functions can be used instead to avoid linking in
    unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
-    gzFile file;
-{
+int ZEXPORT gzclose(gzFile file) {
 #ifndef NO_GZCOMPRESS
     gz_statep state;
 

zlib/gzguts.h

@@ -7,9 +7,8 @@
 #  ifndef _LARGEFILE_SOURCE
 #    define _LARGEFILE_SOURCE 1
 #  endif
-#  ifdef _FILE_OFFSET_BITS
 #  undef _FILE_OFFSET_BITS
-#  endif
+#  undef _TIME_BITS
 #endif
 
 #ifdef HAVE_HIDDEN
@@ -119,8 +118,8 @@
 
 /* gz* functions always use library allocation functions */
 #ifndef STDC
-  extern voidp  malloc OF((uInt size));
-  extern void   free   OF((voidpf ptr));
+  extern voidp  malloc(uInt size);
+  extern void   free(voidpf ptr);
 #endif
 
 /* get errno and strerror definition */
@@ -138,10 +137,10 @@
 
 /* provide prototypes for these when building zlib without LFS */
 #if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+    ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *);
+    ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int);
+    ZEXTERN z_off64_t ZEXPORT gztell64(gzFile);
+    ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile);
 #endif
 
 /* default memLevel */
@@ -203,9 +202,9 @@ typedef struct {
 typedef gz_state FAR *gz_statep;
 
 /* shared functions */
-void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+void ZLIB_INTERNAL gz_error(gz_statep, int, const char *);
 #if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+char ZLIB_INTERNAL *gz_strwinerror(DWORD error);
 #endif
 
 /* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
@@ -214,6 +213,6 @@ char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
 #ifdef INT_MAX
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
 #else
-unsigned ZLIB_INTERNAL gz_intmax OF((void));
+unsigned ZLIB_INTERNAL gz_intmax(void);
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
 #endif

zlib/gzlib.c

@@ -15,10 +15,6 @@
 #endif
 #endif
 
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const void *, int, const char *));
-
 #if defined UNDER_CE
 
 /* Map the Windows error number in ERROR to a locale-dependent error message
@@ -30,9 +26,7 @@ local gzFile gz_open OF((const void *, int, const char *));
 
    The gz_strwinerror function does not change the current setting of
    GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror(error)
-     DWORD error;
-{
+char ZLIB_INTERNAL *gz_strwinerror(DWORD error) {
     static char buf[1024];
 
     wchar_t *msgbuf;
@@ -72,9 +66,7 @@ char ZLIB_INTERNAL *gz_strwinerror(error)
 #endif /* UNDER_CE */
 
 /* Reset gzip file state */
-local void gz_reset(state)
-    gz_statep state;
-{
+local void gz_reset(gz_statep state) {
     state->x.have = 0;              /* no output data available */
     if (state->mode == GZ_READ) {   /* for reading ... */
         state->eof = 0;             /* not at end of file */
@@ -90,11 +82,7 @@ local void gz_reset(state)
 }
 
 /* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
-    const void *path;
-    int fd;
-    const char *mode;
-{
+local gzFile gz_open(const void *path, int fd, const char *mode) {
     gz_statep state;
     z_size_t len;
     int oflag;
@@ -269,26 +257,17 @@ local gzFile gz_open(path, fd, mode)
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
-    const char *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen(const char *path, const char *mode) {
     return gz_open(path, -1, mode);
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
-    const char *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen64(const char *path, const char *mode) {
     return gz_open(path, -1, mode);
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
-    int fd;
-    const char *mode;
-{
+gzFile ZEXPORT gzdopen(int fd, const char *mode) {
     char *path;         /* identifier for error messages */
     gzFile gz;
 
@@ -306,19 +285,13 @@ gzFile ZEXPORT gzdopen(fd, mode)
 
 /* -- see zlib.h -- */
 #ifdef WIDECHAR
-gzFile ZEXPORT gzopen_w(path, mode)
-    const wchar_t *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen_w(const wchar_t *path, const char *mode) {
     return gz_open(path, -2, mode);
 }
 #endif
 
 /* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
-    gzFile file;
-    unsigned size;
-{
+int ZEXPORT gzbuffer(gzFile file, unsigned size) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -335,16 +308,14 @@ int ZEXPORT gzbuffer(file, size)
     /* check and set requested size */
     if ((size << 1) < size)
         return -1;              /* need to be able to double it */
-    if (size < 2)
-        size = 2;               /* need two bytes to check magic header */
+    if (size < 8)
+        size = 8;               /* needed to behave well with flushing */
     state->want = size;
     return 0;
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
-    gzFile file;
-{
+int ZEXPORT gzrewind(gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -365,11 +336,7 @@ int ZEXPORT gzrewind(file)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-{
+z_off64_t ZEXPORT gzseek64(gzFile file, z_off64_t offset, int whence) {
     unsigned n;
     z_off64_t ret;
     gz_statep state;
@@ -442,11 +409,7 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
+z_off_t ZEXPORT gzseek(gzFile file, z_off_t offset, int whence) {
     z_off64_t ret;
 
     ret = gzseek64(file, (z_off64_t)offset, whence);
@@ -454,9 +417,7 @@ z_off_t ZEXPORT gzseek(file, offset, whence)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
-    gzFile file;
-{
+z_off64_t ZEXPORT gztell64(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -471,9 +432,7 @@ z_off64_t ZEXPORT gztell64(file)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
-    gzFile file;
-{
+z_off_t ZEXPORT gztell(gzFile file) {
     z_off64_t ret;
 
     ret = gztell64(file);
@@ -481,9 +440,7 @@ z_off_t ZEXPORT gztell(file)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
-    gzFile file;
-{
+z_off64_t ZEXPORT gzoffset64(gzFile file) {
     z_off64_t offset;
     gz_statep state;
 
@@ -504,9 +461,7 @@ z_off64_t ZEXPORT gzoffset64(file)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
-    gzFile file;
-{
+z_off_t ZEXPORT gzoffset(gzFile file) {
     z_off64_t ret;
 
     ret = gzoffset64(file);
@@ -514,9 +469,7 @@ z_off_t ZEXPORT gzoffset(file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
-    gzFile file;
-{
+int ZEXPORT gzeof(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -531,10 +484,7 @@ int ZEXPORT gzeof(file)
 }
 
 /* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
-    gzFile file;
-    int *errnum;
-{
+const char * ZEXPORT gzerror(gzFile file, int *errnum) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -552,9 +502,7 @@ const char * ZEXPORT gzerror(file, errnum)
 }
 
 /* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
-    gzFile file;
-{
+void ZEXPORT gzclearerr(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -578,11 +526,7 @@ void ZEXPORT gzclearerr(file)
    memory).  Simply save the error message as a static string.  If there is an
    allocation failure constructing the error message, then convert the error to
    out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
-    gz_statep state;
-    int err;
-    const char *msg;
-{
+void ZLIB_INTERNAL gz_error(gz_statep state, int err, const char *msg) {
     /* free previously allocated message and clear */
     if (state->msg != NULL) {
         if (state->err != Z_MEM_ERROR)
@@ -624,8 +568,7 @@ void ZLIB_INTERNAL gz_error(state, err, msg)
    available) -- we need to do this to cover cases where 2's complement not
    used, since C standard permits 1's complement and sign-bit representations,
    otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
+unsigned ZLIB_INTERNAL gz_intmax(void) {
     unsigned p, q;
 
     p = 1;

zlib/gzread.c

@@ -5,25 +5,12 @@
 
 #include "gzguts.h"
 
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_look OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_fetch OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-local z_size_t gz_read OF((gz_statep, voidp, z_size_t));
-
 /* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
    state->fd, and update state->eof, state->err, and state->msg as appropriate.
    This function needs to loop on read(), since read() is not guaranteed to
    read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
-    gz_statep state;
-    unsigned char *buf;
-    unsigned len;
-    unsigned *have;
-{
+local int gz_load(gz_statep state, unsigned char *buf, unsigned len,
+                  unsigned *have) {
     int ret;
     unsigned get, max = ((unsigned)-1 >> 2) + 1;
 
@@ -53,9 +40,7 @@ local int gz_load(state, buf, len, have)
    If strm->avail_in != 0, then the current data is moved to the beginning of
    the input buffer, and then the remainder of the buffer is loaded with the
    available data from the input file. */
-local int gz_avail(state)
-    gz_statep state;
-{
+local int gz_avail(gz_statep state) {
     unsigned got;
     z_streamp strm = &(state->strm);
 
@@ -88,9 +73,7 @@ local int gz_avail(state)
    case, all further file reads will be directly to either the output buffer or
    a user buffer.  If decompressing, the inflate state will be initialized.
    gz_look() will return 0 on success or -1 on failure. */
-local int gz_look(state)
-    gz_statep state;
-{
+local int gz_look(gz_statep state) {
     z_streamp strm = &(state->strm);
 
     /* allocate read buffers and inflate memory */
@@ -170,9 +153,7 @@ local int gz_look(state)
    data.  If the gzip stream completes, state->how is reset to LOOK to look for
    the next gzip stream or raw data, once state->x.have is depleted.  Returns 0
    on success, -1 on failure. */
-local int gz_decomp(state)
-    gz_statep state;
-{
+local int gz_decomp(gz_statep state) {
     int ret = Z_OK;
     unsigned had;
     z_streamp strm = &(state->strm);
@@ -224,9 +205,7 @@ local int gz_decomp(state)
    looked for to determine whether to copy or decompress.  Returns -1 on error,
    otherwise 0.  gz_fetch() will leave state->how as COPY or GZIP unless the
    end of the input file has been reached and all data has been processed.  */
-local int gz_fetch(state)
-    gz_statep state;
-{
+local int gz_fetch(gz_statep state) {
     z_streamp strm = &(state->strm);
 
     do {
@@ -254,10 +233,7 @@ local int gz_fetch(state)
 }
 
 /* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
+local int gz_skip(gz_statep state, z_off64_t len) {
     unsigned n;
 
     /* skip over len bytes or reach end-of-file, whichever comes first */
@@ -289,11 +265,7 @@ local int gz_skip(state, len)
    input.  Return the number of bytes read.  If zero is returned, either the
    end of file was reached, or there was an error.  state->err must be
    consulted in that case to determine which. */
-local z_size_t gz_read(state, buf, len)
-    gz_statep state;
-    voidp buf;
-    z_size_t len;
-{
+local z_size_t gz_read(gz_statep state, voidp buf, z_size_t len) {
     z_size_t got;
     unsigned n;
 
@@ -370,11 +342,7 @@ local z_size_t gz_read(state, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
+int ZEXPORT gzread(gzFile file, voidp buf, unsigned len) {
     gz_statep state;
 
     /* get internal structure */
@@ -406,12 +374,7 @@ int ZEXPORT gzread(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-z_size_t ZEXPORT gzfread(buf, size, nitems, file)
-    voidp buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
+z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems, gzFile file) {
     z_size_t len;
     gz_statep state;
 
@@ -442,9 +405,7 @@ z_size_t ZEXPORT gzfread(buf, size, nitems, file)
 #else
 #  undef gzgetc
 #endif
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
+int ZEXPORT gzgetc(gzFile file) {
     unsigned char buf[1];
     gz_statep state;
 
@@ -469,17 +430,12 @@ int ZEXPORT gzgetc(file)
     return (int)gz_read(state, buf, 1) < 1 ? -1 : buf[0];
 }
 
-int ZEXPORT gzgetc_(file)
-gzFile file;
-{
+int ZEXPORT gzgetc_(gzFile file) {
     return gzgetc(file);
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
+int ZEXPORT gzungetc(int c, gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -487,6 +443,10 @@ int ZEXPORT gzungetc(c, file)
         return -1;
     state = (gz_statep)file;
 
+    /* in case this was just opened, set up the input buffer */
+    if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
+        (void)gz_look(state);
+
     /* check that we're reading and that there's no (serious) error */
     if (state->mode != GZ_READ ||
         (state->err != Z_OK && state->err != Z_BUF_ERROR))
@@ -536,11 +496,7 @@ int ZEXPORT gzungetc(c, file)
 }
 
 /* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
+char * ZEXPORT gzgets(gzFile file, char *buf, int len) {
     unsigned left, n;
     char *str;
     unsigned char *eol;
@@ -600,9 +556,7 @@ char * ZEXPORT gzgets(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
-    gzFile file;
-{
+int ZEXPORT gzdirect(gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -620,9 +574,7 @@ int ZEXPORT gzdirect(file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
-    gzFile file;
-{
+int ZEXPORT gzclose_r(gzFile file) {
     int ret, err;
     gz_statep state;
 

zlib/gzwrite.c

@@ -5,18 +5,10 @@
 
 #include "gzguts.h"
 
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-local z_size_t gz_write OF((gz_statep, voidpc, z_size_t));
-
 /* Initialize state for writing a gzip file.  Mark initialization by setting
    state->size to non-zero.  Return -1 on a memory allocation failure, or 0 on
    success. */
-local int gz_init(state)
-    gz_statep state;
-{
+local int gz_init(gz_statep state) {
     int ret;
     z_streamp strm = &(state->strm);
 
@@ -70,10 +62,7 @@ local int gz_init(state)
    deflate() flush value.  If flush is Z_FINISH, then the deflate() state is
    reset to start a new gzip stream.  If gz->direct is true, then simply write
    to the output file without compressing, and ignore flush. */
-local int gz_comp(state, flush)
-    gz_statep state;
-    int flush;
-{
+local int gz_comp(gz_statep state, int flush) {
     int ret, writ;
     unsigned have, put, max = ((unsigned)-1 >> 2) + 1;
     z_streamp strm = &(state->strm);
@@ -151,10 +140,7 @@ local int gz_comp(state, flush)
 
 /* Compress len zeros to output.  Return -1 on a write error or memory
    allocation failure by gz_comp(), or 0 on success. */
-local int gz_zero(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
+local int gz_zero(gz_statep state, z_off64_t len) {
     int first;
     unsigned n;
     z_streamp strm = &(state->strm);
@@ -184,11 +170,7 @@ local int gz_zero(state, len)
 
 /* Write len bytes from buf to file.  Return the number of bytes written.  If
    the returned value is less than len, then there was an error. */
-local z_size_t gz_write(state, buf, len)
-    gz_statep state;
-    voidpc buf;
-    z_size_t len;
-{
+local z_size_t gz_write(gz_statep state, voidpc buf, z_size_t len) {
     z_size_t put = len;
 
     /* if len is zero, avoid unnecessary operations */
@@ -252,11 +234,7 @@ local z_size_t gz_write(state, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
-    gzFile file;
-    voidpc buf;
-    unsigned len;
-{
+int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len) {
     gz_statep state;
 
     /* get internal structure */
@@ -280,12 +258,8 @@ int ZEXPORT gzwrite(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-z_size_t ZEXPORT gzfwrite(buf, size, nitems, file)
-    voidpc buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
+z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, z_size_t nitems,
+                          gzFile file) {
     z_size_t len;
     gz_statep state;
 
@@ -310,10 +284,7 @@ z_size_t ZEXPORT gzfwrite(buf, size, nitems, file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
+int ZEXPORT gzputc(gzFile file, int c) {
     unsigned have;
     unsigned char buf[1];
     gz_statep state;
@@ -358,10 +329,7 @@ int ZEXPORT gzputc(file, c)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzputs(file, s)
-    gzFile file;
-    const char *s;
-{
+int ZEXPORT gzputs(gzFile file, const char *s) {
     z_size_t len, put;
     gz_statep state;
 
@@ -388,8 +356,7 @@ int ZEXPORT gzputs(file, s)
 #include <stdarg.h>
 
 /* -- see zlib.h -- */
-int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
-{
+int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) {
     int len;
     unsigned left;
     char *next;
@@ -460,8 +427,7 @@ int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
     return len;
 }
 
-int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
-{
+int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) {
     va_list va;
     int ret;
 
@@ -474,13 +440,10 @@ int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
 #else /* !STDC && !Z_HAVE_STDARG_H */
 
 /* -- see zlib.h -- */
-int ZEXPORTVA gzprintf(file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
+int ZEXPORTVA gzprintf(gzFile file, const char *format, int a1, int a2, int a3,
+                       int a4, int a5, int a6, int a7, int a8, int a9, int a10,
+                       int a11, int a12, int a13, int a14, int a15, int a16,
+                       int a17, int a18, int a19, int a20) {
     unsigned len, left;
     char *next;
     gz_statep state;
@@ -562,10 +525,7 @@ int ZEXPORTVA gzprintf(file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
 #endif
 
 /* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
-    gzFile file;
-    int flush;
-{
+int ZEXPORT gzflush(gzFile file, int flush) {
     gz_statep state;
 
     /* get internal structure */
@@ -594,11 +554,7 @@ int ZEXPORT gzflush(file, flush)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
+int ZEXPORT gzsetparams(gzFile file, int level, int strategy) {
     gz_statep state;
     z_streamp strm;
 
@@ -609,7 +565,7 @@ int ZEXPORT gzsetparams(file, level, strategy)
     strm = &(state->strm);
 
     /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
+    if (state->mode != GZ_WRITE || state->err != Z_OK || state->direct)
         return Z_STREAM_ERROR;
 
     /* if no change is requested, then do nothing */
@@ -636,9 +592,7 @@ int ZEXPORT gzsetparams(file, level, strategy)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
-    gzFile file;
-{
+int ZEXPORT gzclose_w(gzFile file) {
     int ret = Z_OK;
     gz_statep state;
 

zlib/infback.c

@@ -15,9 +15,6 @@
 #include "inflate.h"
 #include "inffast.h"
 
-/* function prototypes */
-local void fixedtables OF((struct inflate_state FAR *state));
-
 /*
    strm provides memory allocation functions in zalloc and zfree, or
    Z_NULL to use the library memory allocation functions.
@@ -25,13 +22,9 @@ local void fixedtables OF((struct inflate_state FAR *state));
    windowBits is in the range 8..15, and window is a user-supplied
    window and output buffer that is 2**windowBits bytes.
  */
-int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
-z_streamp strm;
-int windowBits;
-unsigned char FAR *window;
-const char *version;
-int stream_size;
-{
+int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits,
+                             unsigned char FAR *window, const char *version,
+                             int stream_size) {
     struct inflate_state FAR *state;
 
     if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
@@ -80,9 +73,7 @@ int stream_size;
    used for threaded applications, since the rewriting of the tables and virgin
    may not be thread-safe.
  */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
+local void fixedtables(struct inflate_state FAR *state) {
 #ifdef BUILDFIXED
     static int virgin = 1;
     static code *lenfix, *distfix;
@@ -248,13 +239,8 @@ struct inflate_state FAR *state;
    inflateBack() can also return Z_STREAM_ERROR if the input parameters
    are not correct, i.e. strm is Z_NULL or the state was not initialized.
  */
-int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
-z_streamp strm;
-in_func in;
-void FAR *in_desc;
-out_func out;
-void FAR *out_desc;
-{
+int ZEXPORT inflateBack(z_streamp strm, in_func in, void FAR *in_desc,
+                        out_func out, void FAR *out_desc) {
     struct inflate_state FAR *state;
     z_const unsigned char FAR *next;    /* next input */
     unsigned char FAR *put;     /* next output */
@@ -632,9 +618,7 @@ void FAR *out_desc;
     return ret;
 }
 
-int ZEXPORT inflateBackEnd(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateBackEnd(z_streamp strm) {
     if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
         return Z_STREAM_ERROR;
     ZFREE(strm, strm->state);

zlib/inffast.c

@@ -47,10 +47,7 @@
       requires strm->avail_out >= 258 for each loop to avoid checking for
       output space.
  */
-void ZLIB_INTERNAL inflate_fast(strm, start)
-z_streamp strm;
-unsigned start;         /* inflate()'s starting value for strm->avail_out */
-{
+void ZLIB_INTERNAL inflate_fast(z_streamp strm, unsigned start) {
     struct inflate_state FAR *state;
     z_const unsigned char FAR *in;      /* local strm->next_in */
     z_const unsigned char FAR *last;    /* have enough input while in < last */

zlib/inffast.h

@@ -8,4 +8,4 @@
    subject to change. Applications should only use zlib.h.
  */
 
-void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
+void ZLIB_INTERNAL inflate_fast(z_streamp strm, unsigned start);

zlib/inflate.c

@@ -91,20 +91,7 @@
 #  endif
 #endif
 
-/* function prototypes */
-local int inflateStateCheck OF((z_streamp strm));
-local void fixedtables OF((struct inflate_state FAR *state));
-local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
-                           unsigned copy));
-#ifdef BUILDFIXED
-   void makefixed OF((void));
-#endif
-local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
-                              unsigned len));
-
-local int inflateStateCheck(strm)
-z_streamp strm;
-{
+local int inflateStateCheck(z_streamp strm) {
     struct inflate_state FAR *state;
     if (strm == Z_NULL ||
         strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
@@ -116,9 +103,7 @@ z_streamp strm;
     return 0;
 }
 
-int ZEXPORT inflateResetKeep(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateResetKeep(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -142,9 +127,7 @@ z_streamp strm;
     return Z_OK;
 }
 
-int ZEXPORT inflateReset(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateReset(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -155,10 +138,7 @@ z_streamp strm;
     return inflateResetKeep(strm);
 }
 
-int ZEXPORT inflateReset2(strm, windowBits)
-z_streamp strm;
-int windowBits;
-{
+int ZEXPORT inflateReset2(z_streamp strm, int windowBits) {
     int wrap;
     struct inflate_state FAR *state;
 
@@ -195,12 +175,8 @@ int windowBits;
     return inflateReset(strm);
 }
 
-int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
-z_streamp strm;
-int windowBits;
-const char *version;
-int stream_size;
-{
+int ZEXPORT inflateInit2_(z_streamp strm, int windowBits,
+                          const char *version, int stream_size) {
     int ret;
     struct inflate_state FAR *state;
 
@@ -239,22 +215,17 @@ int stream_size;
     return ret;
 }
 
-int ZEXPORT inflateInit_(strm, version, stream_size)
-z_streamp strm;
-const char *version;
-int stream_size;
-{
+int ZEXPORT inflateInit_(z_streamp strm, const char *version,
+                         int stream_size) {
     return inflateInit2_(strm, DEF_WBITS, version, stream_size);
 }
 
-int ZEXPORT inflatePrime(strm, bits, value)
-z_streamp strm;
-int bits;
-int value;
-{
+int ZEXPORT inflatePrime(z_streamp strm, int bits, int value) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    if (bits == 0)
+        return Z_OK;
     state = (struct inflate_state FAR *)strm->state;
     if (bits < 0) {
         state->hold = 0;
@@ -278,9 +249,7 @@ int value;
    used for threaded applications, since the rewriting of the tables and virgin
    may not be thread-safe.
  */
-local void fixedtables(state)
-struct inflate_state FAR *state;
-{
+local void fixedtables(struct inflate_state FAR *state) {
 #ifdef BUILDFIXED
     static int virgin = 1;
     static code *lenfix, *distfix;
@@ -342,7 +311,7 @@ struct inflate_state FAR *state;
 
     a.out > inffixed.h
  */
-void makefixed()
+void makefixed(void)
 {
     unsigned low, size;
     struct inflate_state state;
@@ -396,11 +365,7 @@ void makefixed()
    output will fall in the output data, making match copies simpler and faster.
    The advantage may be dependent on the size of the processor's data caches.
  */
-local int updatewindow(strm, end, copy)
-z_streamp strm;
-const Bytef *end;
-unsigned copy;
-{
+local int updatewindow(z_streamp strm, const Bytef *end, unsigned copy) {
     struct inflate_state FAR *state;
     unsigned dist;
 
@@ -622,10 +587,7 @@ unsigned copy;
    will return Z_BUF_ERROR if it has not reached the end of the stream.
  */
 
-int ZEXPORT inflate(strm, flush)
-z_streamp strm;
-int flush;
-{
+int ZEXPORT inflate(z_streamp strm, int flush) {
     struct inflate_state FAR *state;
     z_const unsigned char FAR *next;    /* next input */
     unsigned char FAR *put;     /* next output */
@@ -1301,9 +1263,7 @@ int flush;
     return ret;
 }
 
-int ZEXPORT inflateEnd(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateEnd(z_streamp strm) {
     struct inflate_state FAR *state;
     if (inflateStateCheck(strm))
         return Z_STREAM_ERROR;
@@ -1315,11 +1275,8 @@ z_streamp strm;
     return Z_OK;
 }
 
-int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-Bytef *dictionary;
-uInt *dictLength;
-{
+int ZEXPORT inflateGetDictionary(z_streamp strm, Bytef *dictionary,
+                                 uInt *dictLength) {
     struct inflate_state FAR *state;
 
     /* check state */
@@ -1338,11 +1295,8 @@ uInt *dictLength;
     return Z_OK;
 }
 
-int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
-z_streamp strm;
-const Bytef *dictionary;
-uInt dictLength;
-{
+int ZEXPORT inflateSetDictionary(z_streamp strm, const Bytef *dictionary,
+                                 uInt dictLength) {
     struct inflate_state FAR *state;
     unsigned long dictid;
     int ret;
@@ -1373,10 +1327,7 @@ uInt dictLength;
     return Z_OK;
 }
 
-int ZEXPORT inflateGetHeader(strm, head)
-z_streamp strm;
-gz_headerp head;
-{
+int ZEXPORT inflateGetHeader(z_streamp strm, gz_headerp head) {
     struct inflate_state FAR *state;
 
     /* check state */
@@ -1401,11 +1352,8 @@ gz_headerp head;
    called again with more data and the *have state.  *have is initialized to
    zero for the first call.
  */
-local unsigned syncsearch(have, buf, len)
-unsigned FAR *have;
-const unsigned char FAR *buf;
-unsigned len;
-{
+local unsigned syncsearch(unsigned FAR *have, const unsigned char FAR *buf,
+                          unsigned len) {
     unsigned got;
     unsigned next;
 
@@ -1424,9 +1372,7 @@ unsigned len;
     return next;
 }
 
-int ZEXPORT inflateSync(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateSync(z_streamp strm) {
     unsigned len;               /* number of bytes to look at or looked at */
     int flags;                  /* temporary to save header status */
     unsigned long in, out;      /* temporary to save total_in and total_out */
@@ -1482,9 +1428,7 @@ z_streamp strm;
    block. When decompressing, PPP checks that at the end of input packet,
    inflate is waiting for these length bytes.
  */
-int ZEXPORT inflateSyncPoint(strm)
-z_streamp strm;
-{
+int ZEXPORT inflateSyncPoint(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -1492,10 +1436,7 @@ z_streamp strm;
     return state->mode == STORED && state->bits == 0;
 }
 
-int ZEXPORT inflateCopy(dest, source)
-z_streamp dest;
-z_streamp source;
-{
+int ZEXPORT inflateCopy(z_streamp dest, z_streamp source) {
     struct inflate_state FAR *state;
     struct inflate_state FAR *copy;
     unsigned char FAR *window;
@@ -1539,10 +1480,7 @@ z_streamp source;
     return Z_OK;
 }
 
-int ZEXPORT inflateUndermine(strm, subvert)
-z_streamp strm;
-int subvert;
-{
+int ZEXPORT inflateUndermine(z_streamp strm, int subvert) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -1557,10 +1495,7 @@ int subvert;
 #endif
 }
 
-int ZEXPORT inflateValidate(strm, check)
-z_streamp strm;
-int check;
-{
+int ZEXPORT inflateValidate(z_streamp strm, int check) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
@@ -1572,9 +1507,7 @@ int check;
     return Z_OK;
 }
 
-long ZEXPORT inflateMark(strm)
-z_streamp strm;
-{
+long ZEXPORT inflateMark(z_streamp strm) {
     struct inflate_state FAR *state;
 
     if (inflateStateCheck(strm))
@@ -1585,9 +1518,7 @@ z_streamp strm;
             (state->mode == MATCH ? state->was - state->length : 0));
 }
 
-unsigned long ZEXPORT inflateCodesUsed(strm)
-z_streamp strm;
-{
+unsigned long ZEXPORT inflateCodesUsed(z_streamp strm) {
     struct inflate_state FAR *state;
     if (inflateStateCheck(strm)) return (unsigned long)-1;
     state = (struct inflate_state FAR *)strm->state;

zlib/inftrees.c

 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2022 Mark Adler
+ * Copyright (C) 1995-2023 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.13 Copyright 1995-2022 Mark Adler ";
+   " inflate 1.3 Copyright 1995-2023 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -29,14 +29,9 @@ const char inflate_copyright[] =
    table index bits.  It will differ if the request is greater than the
    longest code or if it is less than the shortest code.
  */
-int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
-{
+int ZLIB_INTERNAL inflate_table(codetype type, unsigned short FAR *lens,
+                                unsigned codes, code FAR * FAR *table,
+                                unsigned FAR *bits, unsigned short FAR *work) {
     unsigned len;               /* a code's length in bits */
     unsigned sym;               /* index of code symbols */
     unsigned min, max;          /* minimum and maximum code lengths */
@@ -62,7 +57,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 194, 65};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 198, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

zlib/inftrees.h

@@ -57,6 +57,6 @@ typedef enum {
     DISTS
 } codetype;
 
-int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+int ZLIB_INTERNAL inflate_table(codetype type, unsigned short FAR *lens,
                                 unsigned codes, code FAR * FAR *table,
-                             unsigned FAR *bits, unsigned short FAR *work));
+                                unsigned FAR *bits, unsigned short FAR *work);

zlib/qnx/package.qpg

@@ -25,10 +25,10 @@
       <QPG:Files>
          <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
          <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.13" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.13"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.13"/>
-         <QPG:Add file="../libz.so.1.2.13" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.3.0" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.3.0"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.3.0"/>
+         <QPG:Add file="../libz.so.1.3.0" install="/opt/lib/" component="slib"/>
       </QPG:Files>
 
       <QPG:PackageFilter>
@@ -63,7 +63,7 @@
             </QPM:ProductDescription>
 
             <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.13</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.3.0</QPM:ReleaseVersion>
                <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
                <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
                <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>

zlib/treebuild.xml

 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.13">
-    <library name="zlib" dlversion="1.2.13" dlname="z">
+<package name="zlib" version="1.3">
+    <library name="zlib" dlversion="1.3" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
 

zlib/uncompr.c

@@ -24,12 +24,8 @@
    Z_DATA_ERROR if the input data was corrupted, including if the input data is
    an incomplete zlib stream.
 */
-int ZEXPORT uncompress2(dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong *sourceLen;
-{
+int ZEXPORT uncompress2(Bytef *dest, uLongf *destLen, const Bytef *source,
+                        uLong *sourceLen) {
     z_stream stream;
     int err;
     const uInt max = (uInt)-1;
@@ -83,11 +79,7 @@ int ZEXPORT uncompress2(dest, destLen, source, sourceLen)
            err;
 }
 
-int ZEXPORT uncompress(dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
+int ZEXPORT uncompress(Bytef *dest, uLongf *destLen, const Bytef *source,
+                       uLong sourceLen) {
     return uncompress2(dest, destLen, source, &sourceLen);
 }

zlib/win32/README-WIN32.txt

 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.13 is a general purpose data compression library.  All the code is
+zlib 1.3.0 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -22,7 +22,7 @@ before asking for help.
 
 Manifest:
 
-The package zlib-1.2.13-win32-x86.zip will contain the following files:
+The package zlib-1.3.0-win32-x86.zip will contain the following files:
 
   README-WIN32.txt This document
   ChangeLog        Changes since previous zlib packages

zlib/zconf.h.cmakein

@@ -243,7 +243,11 @@
 #endif
 
 #ifdef Z_SOLO
+#  ifdef _WIN64
+     typedef unsigned long long z_size_t;
+#  else
      typedef unsigned long z_size_t;
+#  endif
 #else
 #  define z_longlong long long
 #  if defined(NO_SIZE_T)
@@ -522,7 +526,7 @@ typedef uLong FAR uLongf;
 #if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#  if defined(_WIN32) && !defined(__GNUC__)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t

zlib/zconf.h.in

@@ -241,7 +241,11 @@
 #endif
 
 #ifdef Z_SOLO
+#  ifdef _WIN64
+     typedef unsigned long long z_size_t;
+#  else
      typedef unsigned long z_size_t;
+#  endif
 #else
 #  define z_longlong long long
 #  if defined(NO_SIZE_T)
@@ -520,7 +524,7 @@ typedef uLong FAR uLongf;
 #if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#  if defined(_WIN32) && !defined(__GNUC__)
 #    define z_off64_t __int64
 #  else
 #    define z_off64_t z_off_t

zlib/zlib.3

-.TH ZLIB 3 "13 Oct 2022"
+.TH ZLIB 3 "18 Aug 2023"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -105,9 +105,9 @@ before asking for help.
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS AND LICENSE
-Version 1.2.13
+Version 1.3
 .LP
-Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+Copyright (C) 1995-2023 Jean-loup Gailly and Mark Adler
 .LP
 This software is provided 'as-is', without any express or implied
 warranty.  In no event will the authors be held liable for any damages

zlib/zlib2ansi

-#!/usr/bin/perl
-
-# Transform K&R C function definitions into ANSI equivalent.
-#
-# Author: Paul Marquess
-# Version: 1.0
-# Date: 3 October 2006
-
-# TODO
-#
-# Assumes no function pointer parameters. unless they are typedefed.
-# Assumes no literal strings that look like function definitions
-# Assumes functions start at the beginning of a line
-
-use strict;
-use warnings;
-
-local $/;
-$_ = <>;
-
-my $sp = qr{ \s* (?: /\* .*? \*/ )? \s* }x; # assume no nested comments
-
-my $d1    = qr{ $sp (?: [\w\*\s]+ $sp)* $sp \w+ $sp [\[\]\s]* $sp }x ;
-my $decl  = qr{ $sp (?: \w+ $sp )+ $d1 }xo ;
-my $dList = qr{ $sp $decl (?: $sp , $d1 )* $sp ; $sp }xo ;
-
-
-while (s/^
-            (                  # Start $1
-                (              #   Start $2
-                    .*?        #     Minimal eat content
-                    ( ^ \w [\w\s\*]+ )    #     $3 -- function name
-                    \s*        #     optional whitespace
-                )              # $2 - Matched up to before parameter list
-
-                \( \s*         # Literal "(" + optional whitespace
-                ( [^\)]+ )     # $4 - one or more anythings except ")"
-                \s* \)         # optional whitespace surrounding a Literal ")"
-
-                ( (?: $dList )+ ) # $5
-
-                $sp ^ {        # literal "{" at start of line
-            )                  # Remember to $1
-        //xsom
-      )
-{
-    my $all = $1 ;
-    my $prefix = $2;
-    my $param_list = $4 ;
-    my $params = $5;
-
-    StripComments($params);
-    StripComments($param_list);
-    $param_list =~ s/^\s+//;
-    $param_list =~ s/\s+$//;
-
-    my $i = 0 ;
-    my %pList = map { $_ => $i++ }
-                split /\s*,\s*/, $param_list;
-    my $pMatch = '(\b' . join('|', keys %pList) . '\b)\W*$' ;
-
-    my @params = split /\s*;\s*/, $params;
-    my @outParams = ();
-    foreach my $p (@params)
-    {
-        if ($p =~ /,/)
-        {
-            my @bits = split /\s*,\s*/, $p;
-            my $first = shift @bits;
-            $first =~ s/^\s*//;
-            push @outParams, $first;
-            $first =~ /^(\w+\s*)/;
-            my $type = $1 ;
-            push @outParams, map { $type . $_ } @bits;
-        }
-        else
-        {
-            $p =~ s/^\s+//;
-            push @outParams, $p;
-        }
-    }
-
-
-    my %tmp = map { /$pMatch/;  $_ => $pList{$1}  }
-              @outParams ;
-
-    @outParams = map  { "    $_" }
-                 sort { $tmp{$a} <=> $tmp{$b} }
-                 @outParams ;
-
-    print $prefix ;
-    print "(\n" . join(",\n", @outParams) . ")\n";
-    print "{" ;
-
-}
-
-# Output any trailing code.
-print ;
-exit 0;
-
-
-sub StripComments
-{
-
-  no warnings;
-
-  # Strip C & C++ comments
-  # From the perlfaq
-  $_[0] =~
-
-    s{
-       /\*         ##  Start of /* ... */ comment
-       [^*]*\*+    ##  Non-* followed by 1-or-more *'s
-       (
-         [^/*][^*]*\*+
-       )*          ##  0-or-more things which don't start with /
-                   ##    but do end with '*'
-       /           ##  End of /* ... */ comment
-
-     |         ##     OR  C++ Comment
-       //          ## Start of C++ comment //
-       [^\n]*      ## followed by 0-or-more non end of line characters
-
-     |         ##     OR  various things which aren't comments:
-
-       (
-         "           ##  Start of " ... " string
-         (
-           \\.           ##  Escaped char
-         |               ##    OR
-           [^"\\]        ##  Non "\
-         )*
-         "           ##  End of " ... " string
-
-       |         ##     OR
-
-         '           ##  Start of ' ... ' string
-         (
-           \\.           ##  Escaped char
-         |               ##    OR
-           [^'\\]        ##  Non '\
-         )*
-         '           ##  End of ' ... ' string
-
-       |         ##     OR
-
-         .           ##  Anything other char
-         [^/"'\\]*   ##  Chars which doesn't start a comment, string or escape
-       )
-     }{$2}gxs;
-
-}

zlib/zutil.c

@@ -24,13 +24,11 @@ z_const char * const z_errmsg[10] = {
 };
 
 
-const char * ZEXPORT zlibVersion()
-{
+const char * ZEXPORT zlibVersion(void) {
     return ZLIB_VERSION;
 }
 
-uLong ZEXPORT zlibCompileFlags()
-{
+uLong ZEXPORT zlibCompileFlags(void) {
     uLong flags;
 
     flags = 0;
@@ -121,9 +119,7 @@ uLong ZEXPORT zlibCompileFlags()
 #  endif
 int ZLIB_INTERNAL z_verbose = verbose;
 
-void ZLIB_INTERNAL z_error(m)
-    char *m;
-{
+void ZLIB_INTERNAL z_error(char *m) {
     fprintf(stderr, "%s\n", m);
     exit(1);
 }
@@ -132,9 +128,7 @@ void ZLIB_INTERNAL z_error(m)
 /* exported to allow conversion of error code to string for compress() and
  * uncompress()
  */
-const char * ZEXPORT zError(err)
-    int err;
-{
+const char * ZEXPORT zError(int err) {
     return ERR_MSG(err);
 }
 
@@ -148,22 +142,14 @@ const char * ZEXPORT zError(err)
 
 #ifndef HAVE_MEMCPY
 
-void ZLIB_INTERNAL zmemcpy(dest, source, len)
-    Bytef* dest;
-    const Bytef* source;
-    uInt  len;
-{
+void ZLIB_INTERNAL zmemcpy(Bytef* dest, const Bytef* source, uInt len) {
     if (len == 0) return;
     do {
         *dest++ = *source++; /* ??? to be unrolled */
     } while (--len != 0);
 }
 
-int ZLIB_INTERNAL zmemcmp(s1, s2, len)
-    const Bytef* s1;
-    const Bytef* s2;
-    uInt  len;
-{
+int ZLIB_INTERNAL zmemcmp(const Bytef* s1, const Bytef* s2, uInt len) {
     uInt j;
 
     for (j = 0; j < len; j++) {
@@ -172,10 +158,7 @@ int ZLIB_INTERNAL zmemcmp(s1, s2, len)
     return 0;
 }
 
-void ZLIB_INTERNAL zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
-{
+void ZLIB_INTERNAL zmemzero(Bytef* dest, uInt len) {
     if (len == 0) return;
     do {
         *dest++ = 0;  /* ??? to be unrolled */
@@ -216,8 +199,7 @@ local ptr_table table[MAX_PTR];
  * a protected system like OS/2. Use Microsoft C instead.
  */
 
-voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size)
-{
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size) {
     voidpf buf;
     ulg bsize = (ulg)items*size;
 
@@ -242,8 +224,7 @@ voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size)
     return buf;
 }
 
-void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
-{
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr) {
     int n;
 
     (void)opaque;
@@ -279,14 +260,12 @@ void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
 #  define _hfree   hfree
 #endif
 
-voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, uInt items, uInt size)
-{
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, uInt items, uInt size) {
     (void)opaque;
     return _halloc((long)items, size);
 }
 
-void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
-{
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr) {
     (void)opaque;
     _hfree(ptr);
 }
@@ -299,25 +278,18 @@ void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
 #ifndef MY_ZCALLOC /* Any system without a special alloc function */
 
 #ifndef STDC
-extern voidp  malloc OF((uInt size));
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
+extern voidp malloc(uInt size);
+extern voidp calloc(uInt items, uInt size);
+extern void free(voidpf ptr);
 #endif
 
-voidpf ZLIB_INTERNAL zcalloc(opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
-{
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size) {
     (void)opaque;
     return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
                               (voidpf)calloc(items, size);
 }
 
-void ZLIB_INTERNAL zcfree(opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
-{
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr) {
     (void)opaque;
     free(ptr);
 }

zlib/zutil.h

@@ -191,9 +191,9 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 /* provide prototypes for these when building zlib without LFS */
 #if !defined(_WIN32) && \
     (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
-    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-    ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off_t));
+    ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off_t);
+    ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off_t);
+    ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off_t);
 #endif
 
         /* common defaults */
@@ -232,16 +232,16 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #    define zmemzero(dest, len) memset(dest, 0, len)
 #  endif
 #else
-   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
-   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
-   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
+   void ZLIB_INTERNAL zmemcpy(Bytef* dest, const Bytef* source, uInt len);
+   int ZLIB_INTERNAL zmemcmp(const Bytef* s1, const Bytef* s2, uInt len);
+   void ZLIB_INTERNAL zmemzero(Bytef* dest, uInt len);
 #endif
 
 /* Diagnostic functions */
 #ifdef ZLIB_DEBUG
 #  include <stdio.h>
    extern int ZLIB_INTERNAL z_verbose;
-   extern void ZLIB_INTERNAL z_error OF((char *m));
+   extern void ZLIB_INTERNAL z_error(char *m);
 #  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
 #  define Trace(x) {if (z_verbose>=0) fprintf x ;}
 #  define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -258,9 +258,9 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif
 
 #ifndef Z_SOLO
-   voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
-                                    unsigned size));
-   void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
+   voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items,
+                                unsigned size);
+   void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr);
 #endif
 
 #define ZALLOC(strm, items, size) \