merging 5.1 -> 5.1 rpl. 3 of 4 conflicts are resolved similarly to 6.0->6.0-rpl merging.

mysql_upgrade results changed due to the error messesge of mysqlcheck has changed.

BUILD/SETUP.sh

@@ -80,7 +80,7 @@ path=`dirname $0`
 . "$path/check-cpu"
 
 export AM_MAKEFLAGS
-AM_MAKEFLAGS="-j 4"
+AM_MAKEFLAGS="-j 6"
 
 # SSL library to use.--with-ssl will select our bundled yaSSL
 # implementation of SSL. To use openSSl you will nee too point out
@@ -105,7 +105,7 @@ if [ "x$warning_mode" != "xpedantic" ]; then
   cxx_warnings="$cxx_warnings -Wreorder"
   cxx_warnings="$cxx_warnings -Wctor-dtor-privacy -Wnon-virtual-dtor"
 # Added unless --with-debug=full
-  debug_extra_cflags="-O1 -Wuninitialized"
+  debug_extra_cflags="-O0 -g3 -gdwarf-2" #1 -Wuninitialized"
 else
   warnings="-W -Wall -ansi -pedantic -Wno-long-long -Wno-unused -D_POSIX_SOURCE"
   c_warnings="$warnings"

BUILD/compile-dist

@@ -13,34 +13,51 @@ path=`dirname $0`
 
 # Default to gcc for CC and CXX
 if test -z "$CXX" ; then
-  export CXX=gcc
+  CXX=gcc
   # Set some required compile options
   if test -z "$CXXFLAGS" ; then
-    export CXXFLAGS="-felide-constructors -fno-exceptions -fno-rtti"
+    CXXFLAGS="-felide-constructors -fno-exceptions -fno-rtti"
   fi
 fi
 
 if test -z "$CC" ; then
-  export CC=gcc
+  CC=gcc
 fi
 
 
 # Use ccache, if available
 if ccache -V > /dev/null 2>&1
 then
-  if ! (echo "$CC" | grep "ccache" > /dev/null)
+  if echo "$CC" | grep "ccache" > /dev/null
   then
-    export CC="ccache $CC"
+    :
+  else
+    CC="ccache $CC"
   fi
-  if ! (echo "$CXX" | grep "ccache" > /dev/null)
+  if echo "$CXX" | grep "ccache" > /dev/null
   then
-    export CXX="ccache $CXX"
+    :
+  else
+    CXX="ccache $CXX"
   fi
 fi
 
+if test -z "$MAKE"
+then
+  if gmake -v > /dev/null 2>&1
+  then
+    MAKE="gmake"
+  else
+    MAKE="make"
+  fi
+fi
+
+export CC CXX MAKE
+
 # Make sure to enable all features that affect "make dist"
 # Remember that configure restricts the man pages to the configured features !
 ./configure \
   --with-embedded-server \
   --with-ndbcluster
-make
+$MAKE
+

configure.in

@@ -10,7 +10,7 @@ AC_CANONICAL_SYSTEM
 #
 # When changing major version number please also check switch statement
 # in mysqlbinlog::check_master_version().
-AM_INIT_AUTOMAKE(mysql, 5.1.30)
+AM_INIT_AUTOMAKE(mysql, 5.1.31)
 AM_CONFIG_HEADER([include/config.h:config.h.in])
 
 PROTOCOL_VERSION=10
@@ -405,12 +405,15 @@ dnl Find paths to some shell programs
 AC_PATH_PROG(LN, ln, ln)
 # This must be able to take a -f flag like normal unix ln.
 AC_PATH_PROG(LN_CP_F, ln, ln)
-if ! ( expr "$SYSTEM_TYPE" : ".*netware.*" > /dev/null ); then
-# If ln -f does not exists use -s (AFS systems)
-if test -n "$LN_CP_F"; then
+case $SYSTEM_TYPE in
+  *netware*) ;;
+  *)
+    # If ln -f does not exists use -s (AFS systems)
+    if test -n "$LN_CP_F"; then
       LN_CP_F="$LN_CP_F -s"
-fi
-fi
+    fi
+    ;;
+esac
 
 AC_PATH_PROG(MV, mv, mv)
 AC_PATH_PROG(RM, rm, rm)
@@ -1642,14 +1645,16 @@ else
   OPTIMIZE_CXXFLAGS="-O"
 fi
 
-if expr "$SYSTEM_TYPE" : ".*netware.*" > /dev/null; then
+case $SYSTEM_TYPE in
+  *netware*)
     DEBUG_CFLAGS="-g -DDEBUG -sym internal,codeview4"
     DEBUG_CXXFLAGS="-g -DDEBUG -sym internal,codeview4"
     DEBUG_OPTIMIZE_CC="-DDEBUG"
     DEBUG_OPTIMIZE_CXX="-DDEBUG"
     OPTIMIZE_CFLAGS="-O3 -DNDEBUG"
     OPTIMIZE_CXXFLAGS="-O3 -DNDEBUG"
-fi
+    ;;
+esac
 
 # If the user specified CFLAGS, we won't add any optimizations
 if test -n "$SAVE_CFLAGS"
@@ -1915,15 +1920,18 @@ MYSQL_TZNAME
 # Do the c++ compiler have a bool type
 MYSQL_CXX_BOOL
 # Check some common bugs with gcc 2.8.# on sparc
-if ! ( expr "$SYSTEM_TYPE" : ".*netware.*" > /dev/null ); then
-MYSQL_CHECK_LONGLONG_TO_FLOAT
-if test "$ac_cv_conv_longlong_to_float" != "yes"
-then
+case $SYSTEM_TYPE in
+  *netware*) ;;
+  *)
+    MYSQL_CHECK_LONGLONG_TO_FLOAT
+    if test "$ac_cv_conv_longlong_to_float" != "yes"
+    then
       AC_MSG_ERROR([Your compiler cannot convert a longlong value to a float!
-If you are using gcc 2.8.# you should upgrade to egcs 1.0.3 or newer and try
-again])
-fi
-fi
+ If you are using gcc 2.8.# you should upgrade to egcs 1.0.3 or newer and try
+    again])
+    fi
+    ;;
+esac
 AC_CHECK_TYPES([sigset_t, off_t], [], [], [#include <sys/types.h>])
 AC_CHECK_TYPES([size_t], [], [], [#include <stdio.h>])
 AC_CHECK_TYPES([u_int32_t])
@@ -2040,7 +2048,7 @@ AC_CHECK_FUNCS(alarm bcmp bfill bmove bsearch bzero \
   mkstemp mlockall perror poll pread pthread_attr_create mmap mmap64 getpagesize \
   pthread_attr_getstacksize pthread_attr_setprio pthread_attr_setschedparam \
   pthread_attr_setstacksize pthread_condattr_create pthread_getsequence_np \
-  pthread_key_delete pthread_rwlock_rdlock pthread_setprio \
+  pthread_key_delete pthread_rwlock_rdlock pthread_setprio pthread_setschedprio \
   pthread_setprio_np pthread_setschedparam pthread_sigmask readlink \
   realpath rename rint rwlock_init setupterm \
   shmget shmat shmdt shmctl sigaction sigemptyset sigaddset \
@@ -2549,11 +2557,12 @@ readline_h_ln_cmd=""
 readline_link=""
 want_to_use_readline="no"
 
-if expr "$SYSTEM_TYPE" : ".*netware.*" > /dev/null
-then
+case $SYSTEM_TYPE in
+  *netware*)
     # For NetWare, do not need readline
     echo "Skipping readline"
-else
+    ;;
+  *)
     if [test "$with_libedit" = "yes"] || [test "$with_libedit" = "undefined"] && [test "$with_readline" = "undefined"]
     then
 	readline_topdir="cmd-line-utils"
@@ -2606,7 +2615,8 @@ else
 	      be built with libreadline. Please use --with-libedit to use
 	      the bundled version of libedit instead.])
     fi
-fi
+    ;;
+esac
 
 AC_SUBST(readline_dir)
 AC_SUBST(readline_topdir)

include/Makefile.am

@@ -15,8 +15,9 @@
 # Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
 # MA 02111-1307, USA
 
-BUILT_SOURCES =		$(HEADERS_GEN) link_sources
-HEADERS_GEN =		mysql_version.h my_config.h
+BUILT_SOURCES =		$(HEADERS_GEN_MAKE) link_sources
+HEADERS_GEN_CONFIGURE =		mysql_version.h
+HEADERS_GEN_MAKE =		my_config.h
 HEADERS_ABI =		mysql.h mysql_com.h mysql_time.h \
 			my_list.h my_alloc.h typelib.h mysql/plugin.h
 pkginclude_HEADERS =	$(HEADERS_ABI) my_dbug.h m_string.h my_sys.h \
@@ -25,7 +26,9 @@ pkginclude_HEADERS =	$(HEADERS_ABI) my_dbug.h m_string.h my_sys.h \
 			decimal.h errmsg.h my_global.h my_net.h \
 			my_getopt.h sslopt-longopts.h my_dir.h \
 			sslopt-vars.h sslopt-case.h sql_common.h keycache.h \
-			m_ctype.h my_attribute.h $(HEADERS_GEN)
+			m_ctype.h my_attribute.h $(HEADERS_GEN_CONFIGURE) \
+			$(HEADERS_GEN_MAKE)
+
 noinst_HEADERS =	config-win.h config-netware.h my_bit.h \
 			heap.h my_bitmap.h my_uctype.h \
 			myisam.h myisampack.h myisammrg.h ft_global.h\
@@ -33,7 +36,7 @@ noinst_HEADERS =	config-win.h config-netware.h my_bit.h \
 			my_nosys.h my_alarm.h queues.h rijndael.h sha1.h \
 			my_aes.h my_tree.h my_trie.h hash.h thr_alarm.h \
 			thr_lock.h t_ctype.h violite.h my_md5.h base64.h \
-			mysql_version.h.in my_handler.h my_time.h \
+			my_handler.h my_time.h \
 			my_vle.h my_user.h my_atomic.h atomic/nolock.h \
 			atomic/rwlock.h atomic/x86-gcc.h atomic/x86-msvc.h \
 			atomic/gcc_builtins.h my_libwrap.h my_stacktrace.h
@@ -45,7 +48,7 @@ CLEANFILES =            $(BUILT_SOURCES) readline openssl
 
 
 # Some include files that may be moved and patched by configure
-DISTCLEANFILES =	sched.h $(CLEANFILES)
+DISTCLEANFILES =	sched.h $(CLEANFILES) $(HEADERS_GEN_CONFIGURE)
 
 link_sources:
 	-$(RM) -f readline openssl

include/my_pthread.h

@@ -279,6 +279,8 @@ int sigwait(sigset_t *setp, int *sigp);		/* Use our implemention */
 #define my_pthread_setprio(A,B) pthread_setprio_np((A),(B))
 #elif defined(HAVE_PTHREAD_SETPRIO)
 #define my_pthread_setprio(A,B) pthread_setprio((A),(B))
+#elif defined(HAVE_PTHREAD_SETSCHEDPRIO)
+#define my_pthread_setprio(A,B) pthread_setschedprio((A),(B))
 #else
 extern void my_pthread_setprio(pthread_t thread_id,int prior);
 #endif
@@ -519,6 +521,7 @@ typedef struct st_my_pthread_fastmutex_t
 {
   pthread_mutex_t mutex;
   uint spins;
+  uint rng_state;
 } my_pthread_fastmutex_t;
 void fastmutex_global_init(void);
 

mysql-test/extra/rpl_tests/rpl_insert_id.test

@@ -442,8 +442,6 @@ SELECT f1();
 INSERT INTO t1 VALUES (NULL, f2()), (NULL, LAST_INSERT_ID()),
                       (NULL, LAST_INSERT_ID()), (NULL, f2()), (NULL, f2());
 INSERT INTO t1 VALUES (NULL, f2());
-INSERT INTO t1 VALUES (NULL, LAST_INSERT_ID()), (NULL, LAST_INSERT_ID(5)),
-                      (NULL, @@LAST_INSERT_ID);
 # Test replication of substitution "IS NULL" -> "= LAST_INSERT_ID".
 INSERT INTO t1 VALUES (NULL, 0), (NULL, LAST_INSERT_ID());
 UPDATE t1 SET j= -1 WHERE i IS NULL;

mysql-test/extra/rpl_tests/rpl_row_basic.test

@@ -471,3 +471,184 @@ source include/diff_tables.inc;
 connection master;
 drop table t1;
 sync_slave_with_master;
+
+#
+# Bug #38230  Differences between master and slave after 
+#             UPDATE or DELETE with LIMIT with pk
+#
+# the regression test verifies consistency via selecting
+
+--disable_abort_on_error
+
+--connection master
+
+--disable_warnings
+DROP TABLE IF EXISTS t1, t2;
+--enable_warnings
+
+eval CREATE TABLE t1 (
+  `pk` int(11) NOT NULL AUTO_INCREMENT,
+  `int_nokey` int(11) NOT NULL,
+  `int_key` int(11) NOT NULL,
+  `date_key` date NOT NULL,
+  `date_nokey` date NOT NULL,
+  `time_key` time NOT NULL,
+  `time_nokey` time NOT NULL,
+  `datetime_key` datetime NOT NULL,
+  `datetime_nokey` datetime NOT NULL,
+  `varchar_key` varchar(1) NOT NULL,
+  `varchar_nokey` varchar(1) NOT NULL,
+  PRIMARY KEY (`pk`),
+  KEY `int_key` (`int_key`),
+  KEY `date_key` (`date_key`),
+  KEY `time_key` (`time_key`),
+  KEY `datetime_key` (`datetime_key`),
+  KEY `varchar_key` (`varchar_key`)
+) ENGINE=$type;
+
+INSERT INTO t1 VALUES (1,8,5,'0000-00-00','0000-00-00','10:37:38','10:37:38','0000-00-00 00:00:00','0000-00-00 00:00:00','p','p'),(2,0,9,'0000-00-00','0000-00-00','00:00:00','00:00:00','2007-10-14 00:00:00','2007-10-14 00:00:00','d','d');
+
+eval CREATE TABLE t2 (
+  `pk` int(11) NOT NULL AUTO_INCREMENT,
+  `int_nokey` int(11) NOT NULL,
+  `int_key` int(11) NOT NULL,
+  `date_key` date NOT NULL,
+  `date_nokey` date NOT NULL,
+  `time_key` time NOT NULL,
+  `time_nokey` time NOT NULL,
+  `datetime_key` datetime NOT NULL,
+  `datetime_nokey` datetime NOT NULL,
+  `varchar_key` varchar(1) NOT NULL,
+  `varchar_nokey` varchar(1) NOT NULL,
+  PRIMARY KEY (`pk`),
+  KEY `int_key` (`int_key`),
+  KEY `date_key` (`date_key`),
+  KEY `time_key` (`time_key`),
+  KEY `datetime_key` (`datetime_key`),
+  KEY `varchar_key` (`varchar_key`)
+) ENGINE=$type;
+
+INSERT INTO t2 VALUES (1,1,6,'2005-12-23','2005-12-23','02:24:28','02:24:28','0000-00-00 00:00:00','0000-00-00 00:00:00','g','g'),(2,0,3,'2009-09-14','2009-09-14','00:00:00','00:00:00','2000-01-30 16:39:40','2000-01-30 16:39:40','q','q'),(3,0,3,'0000-00-00','0000-00-00','00:00:00','00:00:00','0000-00-00 00:00:00','0000-00-00 00:00:00','c','c'),(4,1,6,'2007-03-29','2007-03-29','15:49:00','15:49:00','0000-00-00 00:00:00','0000-00-00 00:00:00','m','m'),(5,4,0,'2002-12-04','2002-12-04','00:00:00','00:00:00','0000-00-00 00:00:00','0000-00-00 00:00:00','o','o'),(6,9,0,'2005-01-28','2005-01-28','00:00:00','00:00:00','2001-05-18 00:00:00','2001-05-18 00:00:00','w','w'),(7,6,0,'0000-00-00','0000-00-00','06:57:25','06:57:25','0000-00-00 00:00:00','0000-00-00 00:00:00','m','m'),(8,0,0,'0000-00-00','0000-00-00','00:00:00','00:00:00','0000-00-00 00:00:00','0000-00-00 00:00:00','z','z'),(9,4,6,'2006-08-15','2006-08-15','00:00:00','00:00:00','2002-04-12 14:44:25','2002-04-12 14:44:25','j','j'),(10,0,5,'2006-12-20','2006-12-20','10:13:53','10:13:53','2008-07-22 00:00:00','2008-07-22 00:00:00','y','y'),(11,9,7,'0000-00-00','0000-00-00','00:00:00','00:00:00','2004-07-05 00:00:00','2004-07-05 00:00:00','{','{'),(12,4,3,'2007-01-26','2007-01-26','23:00:51','23:00:51','2001-05-16 00:00:00','2001-05-16 00:00:00','f','f'),(13,7,0,'2004-03-27','2004-03-27','00:00:00','00:00:00','2005-01-24 03:30:37','2005-01-24 03:30:37','',''),(14,6,0,'2006-07-26','2006-07-26','18:43:57','18:43:57','0000-00-00 00:00:00','0000-00-00 00:00:00','{','{'),(15,0,6,'2000-01-14','2000-01-14','00:00:00','00:00:00','2000-09-21 00:00:00','2000-09-21 00:00:00','o','o'),(16,9,8,'0000-00-00','0000-00-00','21:15:08','21:15:08','0000-00-00 00:00:00','0000-00-00 00:00:00','a','a'),(17,2,0,'2004-10-27','2004-10-27','00:00:00','00:00:00','2004-03-24 22:13:43','2004-03-24 22:13:43','',''),(18,7,4,'0000-00-00','0000-00-00','08:38:27','08:38:27','2002-03-18 19:51:44','2002-03-18 19:51:44','t','t'),(19,5,3,'2008-03-07','2008-03-07','03:29:07','03:29:07','2007-12-01 18:44:44','2007-12-01 18:44:44','t','t'),(20,0,0,'2002-04-09','2002-04-09','16:06:03','16:06:03','2009-04-22 00:00:00','2009-04-22 00:00:00','n','n');
+
+DELETE FROM t2 WHERE `int_key` < 3 LIMIT 1;
+UPDATE t1 SET `int_key` = 3 ORDER BY `pk` LIMIT 4;
+DELETE FROM t2 WHERE `int_key` < 3 LIMIT 1;
+DELETE FROM t2 WHERE `pk` < 6 LIMIT 1;
+UPDATE t1 SET `int_key` = 6 ORDER BY `pk` LIMIT 3;
+DELETE FROM t2 WHERE `pk` < 6 LIMIT 1;
+UPDATE t1 SET `pk` = 6 ORDER BY `int_key` LIMIT 6;
+DELETE FROM t2 WHERE `pk` < 7 LIMIT 1;
+UPDATE t1 SET `int_key` = 4 ORDER BY `pk` LIMIT 6;
+
+--sync_slave_with_master
+--echo *** results: t2 must be consistent ****
+
+let $diff_table_1=master:test.t2;
+let $diff_table_2=master:test.t2;
+source include/diff_tables.inc;
+
+--connection master
+DROP TABLE t1, t2;
+
+--enable_abort_on_error
+
+--echo EOF OF TESTS
+
+#
+# BUG#40004: Replication failure with no PK + no indexes
+#
+
+# The test cases are taken from the bug report. It is difficult to
+# produce a test case that generates a HA_ERR_RECORD_DELETED, so we go
+# with the test cases we have.
+
+connection master;
+
+eval CREATE TABLE t1 (a int) ENGINE=$type;
+
+INSERT IGNORE INTO t1 VALUES (NULL);
+INSERT INTO t1 ( a ) VALUES ( 0 );
+INSERT INTO t1 ( a ) VALUES ( 9 );
+INSERT INTO t1 ( a ) VALUES ( 2 );
+INSERT INTO t1 ( a ) VALUES ( 9 );
+INSERT INTO t1 ( a ) VALUES ( 5 );
+
+UPDATE t1 SET a = 5 WHERE a = 9;
+DELETE FROM t1 WHERE a < 6;
+UPDATE t1 SET a = 9 WHERE a < 3;
+INSERT INTO t1 ( a ) VALUES ( 3 );
+UPDATE t1 SET a = 0 WHERE a < 4;
+UPDATE t1 SET a = 8 WHERE a < 5;
+
+sync_slave_with_master;
+
+let $diff_table_1=master:test.t1;
+let $diff_table_2=slave:test.t1;
+source include/diff_tables.inc;
+
+connection master;
+drop table t1;
+sync_slave_with_master;
+
+#
+# Bug #39752: Replication failure on RBR + MyISAM + no PK
+#
+
+# The test cases are taken from the bug report. It is difficult to
+# produce a test case that generates a HA_ERR_RECORD_DELETED, so we go
+# with the test cases we have.
+
+connection master;
+
+--disable_warnings
+eval CREATE TABLE t1 (a bit) ENGINE=$type;
+INSERT IGNORE INTO t1 VALUES (NULL);
+INSERT INTO t1 ( a ) VALUES ( 0 );
+UPDATE t1 SET a = 0 WHERE a = 1 LIMIT 3;
+INSERT INTO t1 ( a ) VALUES ( 5 );
+DELETE FROM t1 WHERE a < 2 LIMIT 4;
+DELETE FROM t1 WHERE a < 9 LIMIT 4;
+INSERT INTO t1 ( a ) VALUES ( 9 );
+UPDATE t1 SET a = 8 WHERE a = 0 LIMIT 6;
+INSERT INTO t1 ( a ) VALUES ( 8 );
+UPDATE t1 SET a = 0 WHERE a < 6 LIMIT 0;
+INSERT INTO t1 ( a ) VALUES ( 4 );
+INSERT INTO t1 ( a ) VALUES ( 3 );
+UPDATE t1 SET a = 0 WHERE a = 7 LIMIT 6;
+DELETE FROM t1 WHERE a = 4 LIMIT 7;
+UPDATE t1 SET a = 9 WHERE a < 2 LIMIT 9;
+UPDATE t1 SET a = 0 WHERE a < 9 LIMIT 2;
+DELETE FROM t1 WHERE a < 0 LIMIT 5;
+INSERT INTO t1 ( a ) VALUES ( 5 );
+UPDATE t1 SET a = 4 WHERE a < 6 LIMIT 4;
+INSERT INTO t1 ( a ) VALUES ( 5 );
+UPDATE t1 SET a = 9 WHERE a < 5 LIMIT 8;
+DELETE FROM t1 WHERE a < 8 LIMIT 8;
+INSERT INTO t1 ( a ) VALUES ( 6 );
+DELETE FROM t1 WHERE a < 6 LIMIT 7;
+UPDATE t1 SET a = 7 WHERE a = 3 LIMIT 7;
+UPDATE t1 SET a = 8 WHERE a = 0 LIMIT 6;
+INSERT INTO t1 ( a ) VALUES ( 7 );
+DELETE FROM t1 WHERE a < 9 LIMIT 4;
+INSERT INTO t1 ( a ) VALUES ( 7 );
+INSERT INTO t1 ( a ) VALUES ( 6 );
+UPDATE t1 SET a = 8 WHERE a = 3 LIMIT 4;
+DELETE FROM t1 WHERE a = 2 LIMIT 9;
+DELETE FROM t1 WHERE a = 1 LIMIT 4;
+UPDATE t1 SET a = 4 WHERE a = 2 LIMIT 7;
+INSERT INTO t1 ( a ) VALUES ( 0 );
+DELETE FROM t1 WHERE a < 3 LIMIT 0;
+UPDATE t1 SET a = 8 WHERE a = 5 LIMIT 2;
+INSERT INTO t1 ( a ) VALUES ( 1 );
+UPDATE t1 SET a = 9 WHERE a < 5 LIMIT 3;
+--enable_warnings
+
+sync_slave_with_master;
+
+let $diff_table_1=master:test.t1;
+let $diff_table_2=slave:test.t1;
+source include/diff_tables.inc;
+
+connection master;
+drop table t1;
+sync_slave_with_master;

mysql-test/include/wait_condition.inc.moved

-# include/wait_condition.inc
-#
-# SUMMARY
-#
-#    Waits until the passed statement returns true, or the operation
-#    times out.
-#
-# USAGE
-#
-#    let $wait_condition=
-#      SELECT c = 3 FROM t;
-#    --source include/wait_condition.inc
-#
-#   OR
-#
-#    let $wait_timeout= 60; # Override default 30 seconds with 60.
-#    let $wait_condition=
-#      SELECT c = 3 FROM t;
-#    --source include/wait_condition.inc
-#    --echo Executed the test condition $wait_condition_reps times
-#
-# EXAMPLE
-#    events_bugs.test, events_time_zone.test
-#
-
---disable_query_log
-
-let $wait_counter= 300;
-if ($wait_timeout)
-{
-  let $wait_counter= `SELECT $wait_timeout * 10`;
-}
-# Reset $wait_timeout so that its value won't be used on subsequent
-# calls, and default will be used instead.
-let $wait_timeout= 0;
-
-# Keep track of how many times the wait condition is tested
-# This is used by some tests (e.g., main.status)
-let $wait_condition_reps= 0;
-while ($wait_counter)
-{
-    let $success= `$wait_condition`;
-    inc $wait_condition_reps;
-    if ($success)
-    {
-        let $wait_counter= 0;
-    }
-    if (!$success)
-    {
-        real_sleep 0.1;
-        dec $wait_counter;
-    }
-}
-if (!$success)
-{
-  echo Timeout in wait_condition.inc for $wait_condition;
-}
-
---enable_query_log

mysql-test/r/alter_table.result

@@ -1222,4 +1222,34 @@ ALTER TABLE t1 CHANGE d c varchar(10);
 affected rows: 0
 info: Records: 0  Duplicates: 0  Warnings: 0
 DROP TABLE t1;
+create table t1(f1 int not null, f2 int not null, key  (f1), key (f2));
+select index_length into @unpaked_keys_size from
+information_schema.tables where table_name='t1';
+alter table t1 pack_keys=1;
+select index_length into @paked_keys_size from
+information_schema.tables where table_name='t1';
+select (@unpaked_keys_size > @paked_keys_size);
+(@unpaked_keys_size > @paked_keys_size)
+1
+select max_data_length into @orig_max_data_length from
+information_schema.tables where table_name='t1';
+alter table t1 max_rows=100;
+select max_data_length into @changed_max_data_length from
+information_schema.tables where table_name='t1';
+select (@orig_max_data_length > @changed_max_data_length);
+(@orig_max_data_length > @changed_max_data_length)
+1
+drop table t1;
+CREATE TABLE t1(a INT AUTO_INCREMENT PRIMARY KEY, 
+b ENUM('a', 'b', 'c') NOT NULL);
+INSERT INTO t1 (b) VALUES ('a'), ('c'), ('b'), ('b'), ('a');
+ALTER TABLE t1 MODIFY b ENUM('a', 'z', 'b', 'c') NOT NULL;
+SELECT * FROM t1;
+a	b
+1	a
+2	c
+3	b
+4	b
+5	a
+DROP TABLE t1;
 End of 5.1 tests

mysql-test/r/binlog_format_basic.result

+SELECT @@GLOBAL.binlog_format;
+@@GLOBAL.binlog_format
+STATEMENT
 '#---------------------BS_STVARS_002_01----------------------#'
 SET @start_value= @@global.binlog_format;
 SELECT COUNT(@@GLOBAL.binlog_format);

mysql-test/r/events_bugs.result

@@ -59,7 +59,8 @@ begin
 select get_lock('test_bug16407', 60);
 end|
 "Now if everything is fine the event has compiled and is locked"
-select /*1*/ user, host, db, info from information_schema.processlist where command!='Daemon' and (info is null or info not like '%processlist%') order by info;
+select /*1*/ user, host, db, info from information_schema.processlist
+where info = 'select get_lock(\'test_bug16407\', 60)';
 user	host	db	info
 root	localhost	events_test	select get_lock('test_bug16407', 60)
 select release_lock('test_bug16407');
@@ -114,18 +115,18 @@ event_schema	event_name	sql_mode
 events_test	ee_16407_2	STRICT_TRANS_TABLES,STRICT_ALL_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,TRADITIONAL,NO_AUTO_CREATE_USER
 events_test	ee_16407_3	STRICT_TRANS_TABLES,STRICT_ALL_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,TRADITIONAL,NO_AUTO_CREATE_USER
 events_test	ee_16407_4	
-select /*2*/ user, host, db, info from information_schema.processlist where (command!='Daemon' || user='event_scheduler') and (info is null or info not like '%processlist%') order by info;
+select /*2*/ user, host, db, info from information_schema.processlist
+where info = 'select get_lock(\'ee_16407_2\', 60)';
 user	host	db	info
-event_scheduler	localhost	NULL	NULL
 root	localhost	events_test	select get_lock('ee_16407_2', 60)
 root	localhost	events_test	select get_lock('ee_16407_2', 60)
 root	localhost	events_test	select get_lock('ee_16407_2', 60)
 select release_lock('ee_16407_2');
 release_lock('ee_16407_2')
 1
-select /*3*/ user, host, db, info from information_schema.processlist where (command!='Daemon' || user='event_scheduler') and (info is null or info not like '%processlist%') order by info;
+select /*3*/ user, host, db, info from information_schema.processlist
+where info = 'select get_lock(\'ee_16407_2\', 60)';
 user	host	db	info
-event_scheduler	localhost	NULL	NULL
 set global event_scheduler= off;
 select * from events_smode_test order by ev_name, a;
 ev_name	a
@@ -164,7 +165,9 @@ select release_lock('ee_16407_5');
 call events_test.ee_16407_6_pendant();
 end|
 "Should have 2 locked processes"
-select /*4*/ user, host, db, info from information_schema.processlist where (command!='Daemon' || user='event_scheduler') and (info is null or info not like '%processlist%') order by info;
+select /*4*/ user, host, db, info from information_schema.processlist
+where (command!='Daemon' || user='event_scheduler') and (info is null or info not like '%processlist%')
+order by info;
 user	host	db	info
 event_scheduler	localhost	NULL	NULL
 root	localhost	events_test	select get_lock('ee_16407_5', 60)
@@ -173,7 +176,9 @@ select release_lock('ee_16407_5');
 release_lock('ee_16407_5')
 1
 "Should have 0 processes locked"
-select /*5*/ user, host, db, info from information_schema.processlist where (command!='Daemon' || user='event_scheduler') and (info is null or info not like '%processlist%') order by info;
+select /*5*/ user, host, db, info from information_schema.processlist
+where (command!='Daemon' || user='event_scheduler') and (info is null or info not like '%processlist%')
+order by info;
 user	host	db	info
 event_scheduler	localhost	NULL	NULL
 select * from events_smode_test order by ev_name, a;
@@ -566,10 +571,9 @@ SHOW GRANTS FOR CURRENT_USER;
 Grants for root@localhost
 GRANT ALL PRIVILEGES ON *.* TO 'root'@'localhost' WITH GRANT OPTION
 SET GLOBAL event_scheduler = ON;
-CREATE TABLE event_log (id int KEY AUTO_INCREMENT,
-ev_nm char(40), ev_cnt int,
-ev_tm timestamp) ENGINE=MyISAM;
-SET @ev_base_date = 20281224180000;
+CREATE TABLE events_test.event_log
+(id int KEY AUTO_INCREMENT, ev_nm char(40), ev_cnt int, ev_tm timestamp)
+ENGINE=MyISAM;
 SET autocommit=0;
 CREATE USER evtest1@localhost;
 SET PASSWORD FOR evtest1@localhost = password('ev1');
@@ -582,41 +586,40 @@ GRANT USAGE ON *.* TO 'evtest1'@'localhost' IDENTIFIED BY PASSWORD '*3170F3644E3
 GRANT SELECT, INSERT ON `test`.* TO 'evtest1'@'localhost'
 GRANT SELECT, INSERT, CREATE, EVENT ON `events_test`.* TO 'evtest1'@'localhost'
 connection e1;
-USE events_test;
 CREATE EVENT ev_sched_1823 ON SCHEDULE EVERY 2 SECOND
 DO BEGIN
 SET AUTOCOMMIT = 0;
 SET @evname = 'ev_sched_1823';
 SET @cnt = 0;
-SELECT COUNT(*) INTO @cnt FROM test.event_log WHERE ev_nm = @evname;
+SELECT COUNT(*) INTO @cnt FROM events_test.event_log WHERE ev_nm = @evname;
 IF @cnt < 6 THEN
-INSERT INTO test.event_log VALUES (NULL,@evname,@cnt+1,current_timestamp());
+INSERT INTO events_test.event_log VALUES (NULL,@evname,@cnt+1,current_timestamp());
 COMMIT;
 END IF;
-SELECT COUNT(*) INTO @cnt FROM test.event_log WHERE ev_nm = @evname;
+SELECT COUNT(*) INTO @cnt FROM events_test.event_log WHERE ev_nm = @evname;
 IF @cnt < 6 THEN
-INSERT INTO test.event_log VALUES (NULL,@evname,@cnt+1,current_timestamp());
+INSERT INTO events_test.event_log VALUES (NULL,@evname,@cnt+1,current_timestamp());
 ROLLBACK;
 END IF;
 END;|
+Sleep till the first INSERT into events_test.event_log occured
+SELECT COUNT(*) > 0 AS "Expect 1" FROM events_test.event_log;
+Expect 1
+1
 connection default;
-DROP EVENT ev_sched_1823;
 DROP USER evtest1@localhost;
-USE test;
-=====================================================================================
-select id,ev_nm,ev_cnt from event_log order by id;
-id	ev_nm	ev_cnt
-1	ev_sched_1823	1
-2	ev_sched_1823	2
-3	ev_sched_1823	3
-4	ev_sched_1823	4
-5	ev_sched_1823	5
-6	ev_sched_1823	6
-DROP TABLE event_log;
+Sleep 4 seconds
+SELECT COUNT(*) INTO @row_cnt FROM events_test.event_log;
+Sleep 4 seconds
+SELECT COUNT(*) > @row_cnt AS "Expect 0" FROM events_test.event_log;
+Expect 0
+0
+DROP EVENT events_test.ev_sched_1823;
+DROP TABLE events_test.event_log;
 SET GLOBAL event_scheduler = OFF;
 SET GLOBAL event_scheduler= ON;
 CREATE EVENT bug28641 ON SCHEDULE AT '2038.01.18 03:00:00'
-            DO BEGIN
+DO BEGIN
 SELECT 1;
 END;|
 SET GLOBAL event_scheduler= OFF;

mysql-test/r/explain.result

@@ -107,3 +107,78 @@ X	X	X	X	X	X	X	X	X
 X	X	X	X	X	X	X	X	X	Range checked for each record (index map: 0xFFFFFFFFFF)
 DROP TABLE t2;
 DROP TABLE t1;
+CREATE TABLE t1(a INT);
+CREATE TABLE t2(a INT);
+INSERT INTO t1 VALUES (1),(2);
+INSERT INTO t2 VALUES (1),(2);
+EXPLAIN EXTENDED SELECT 1
+FROM (SELECT COUNT(DISTINCT t1.a) FROM t1,t2 GROUP BY t1.a) AS s1;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
+1	PRIMARY	<derived2>	ALL	NULL	NULL	NULL	NULL	2	100.00	
+2	DERIVED	t1	ALL	NULL	NULL	NULL	NULL	2	100.00	Using temporary; Using filesort
+2	DERIVED	t2	ALL	NULL	NULL	NULL	NULL	2	100.00	Using join buffer
+Warnings:
+Note	1003	select 1 AS `1` from (select count(distinct `test`.`t1`.`a`) AS `COUNT(DISTINCT t1.a)` from `test`.`t1` join `test`.`t2` group by `test`.`t1`.`a`) `s1`
+EXPLAIN EXTENDED SELECT 1
+FROM (SELECT COUNT(DISTINCT t1.a) FROM t1,t2 GROUP BY t1.a) AS s1;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
+1	PRIMARY	<derived2>	ALL	NULL	NULL	NULL	NULL	2	100.00	
+2	DERIVED	t1	ALL	NULL	NULL	NULL	NULL	2	100.00	Using temporary; Using filesort
+2	DERIVED	t2	ALL	NULL	NULL	NULL	NULL	2	100.00	Using join buffer
+Warnings:
+Note	1003	select 1 AS `1` from (select count(distinct `test`.`t1`.`a`) AS `COUNT(DISTINCT t1.a)` from `test`.`t1` join `test`.`t2` group by `test`.`t1`.`a`) `s1`
+prepare s1 from 
+'EXPLAIN EXTENDED SELECT 1  
+ FROM (SELECT COUNT(DISTINCT t1.a) FROM t1,t2 GROUP BY t1.a) AS s1';
+execute s1;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
+1	PRIMARY	<derived2>	ALL	NULL	NULL	NULL	NULL	2	100.00	
+2	DERIVED	t1	ALL	NULL	NULL	NULL	NULL	2	100.00	Using temporary; Using filesort
+2	DERIVED	t2	ALL	NULL	NULL	NULL	NULL	2	100.00	Using join buffer
+Warnings:
+Note	1003	select 1 AS `1` from (select count(distinct `test`.`t1`.`a`) AS `COUNT(DISTINCT t1.a)` from `test`.`t1` join `test`.`t2` group by `test`.`t1`.`a`) `s1`
+prepare s1 from 
+'EXPLAIN EXTENDED SELECT 1  
+ FROM (SELECT COUNT(DISTINCT t1.a) FROM t1,t2 GROUP BY t1.a) AS s1';
+execute s1;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
+1	PRIMARY	<derived2>	ALL	NULL	NULL	NULL	NULL	2	100.00	
+2	DERIVED	t1	ALL	NULL	NULL	NULL	NULL	2	100.00	Using temporary; Using filesort
+2	DERIVED	t2	ALL	NULL	NULL	NULL	NULL	2	100.00	Using join buffer
+Warnings:
+Note	1003	select 1 AS `1` from (select count(distinct `test`.`t1`.`a`) AS `COUNT(DISTINCT t1.a)` from `test`.`t1` join `test`.`t2` group by `test`.`t1`.`a`) `s1`
+execute s1;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
+1	PRIMARY	<derived2>	ALL	NULL	NULL	NULL	NULL	2	100.00	
+2	DERIVED	t1	ALL	NULL	NULL	NULL	NULL	2	100.00	Using temporary; Using filesort
+2	DERIVED	t2	ALL	NULL	NULL	NULL	NULL	2	100.00	Using join buffer
+Warnings:
+Note	1003	select 1 AS `1` from (select count(distinct `test`.`t1`.`a`) AS `COUNT(DISTINCT t1.a)` from `test`.`t1` join `test`.`t2` group by `test`.`t1`.`a`) `s1`
+DROP TABLE t1,t2;
+#
+# Bug#37870: Usage of uninitialized value caused failed assertion.
+#
+create table t1 (dt datetime not null, t time not null);
+create table t2 (dt datetime not null);
+insert into t1 values ('2001-01-01 1:1:1', '1:1:1'),
+('2001-01-01 1:1:1', '1:1:1');
+insert into t2 values ('2001-01-01 1:1:1'), ('2001-01-01 1:1:1');
+flush tables;
+EXPLAIN SELECT OUTR.dt FROM t1 AS OUTR WHERE OUTR.dt IN (SELECT INNR.dt FROM t2 AS INNR WHERE OUTR.dt IS NULL );
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
+1	PRIMARY	OUTR	ALL	NULL	NULL	NULL	NULL	2	Using where
+2	DEPENDENT SUBQUERY	INNR	ALL	NULL	NULL	NULL	NULL	2	Using where
+flush tables;
+SELECT OUTR.dt FROM t1 AS OUTR WHERE OUTR.dt IN (SELECT INNR.dt FROM t2 AS INNR WHERE OUTR.dt IS NULL );
+dt
+flush tables;
+EXPLAIN SELECT OUTR.dt FROM t1 AS OUTR WHERE OUTR.dt IN ( SELECT INNR.dt FROM t2 AS INNR WHERE OUTR.t < '2005-11-13 7:41:31' );
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
+1	PRIMARY	OUTR	ALL	NULL	NULL	NULL	NULL	2	Using where
+2	DEPENDENT SUBQUERY	INNR	ALL	NULL	NULL	NULL	NULL	2	Using where
+flush tables;
+SELECT OUTR.dt FROM t1 AS OUTR WHERE OUTR.dt IN ( SELECT INNR.dt FROM t2 AS INNR WHERE OUTR.t < '2005-11-13 7:41:31' );
+dt
+2001-01-01 01:01:01
+2001-01-01 01:01:01
+drop tables t1, t2;

mysql-test/r/group_by.result

@@ -1274,6 +1274,36 @@ tt
 41
 SET sql_mode=@save_sql_mode;
 DROP TABLE t1, t2;
+# 
+# BUG#38072: Wrong result: HAVING not observed in a query with aggregate
+# 
+CREATE TABLE t1 (
+pk int(11) NOT NULL AUTO_INCREMENT,
+int_nokey int(11) NOT NULL,
+int_key int(11) NOT NULL,
+varchar_key varchar(1) NOT NULL,
+varchar_nokey varchar(1) NOT NULL,
+PRIMARY KEY (pk),
+KEY int_key (int_key),
+KEY varchar_key (varchar_key)
+);
+INSERT INTO t1 VALUES 
+(1,5,5, 'h','h'),
+(2,1,1, '{','{'),
+(3,1,1, 'z','z'),
+(4,8,8, 'x','x'),
+(5,7,7, 'o','o'),
+(6,3,3, 'p','p'),
+(7,9,9, 'c','c'),
+(8,0,0, 'k','k'),
+(9,6,6, 't','t'),
+(10,0,0,'c','c');
+explain SELECT COUNT(varchar_key) AS X FROM t1 WHERE pk = 8 having 'foo'='bar';
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
+1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	Impossible HAVING
+SELECT COUNT(varchar_key) AS X FROM t1 WHERE pk = 8 having 'foo'='bar';
+X
+drop table t1;
 End of 5.0 tests
 CREATE TABLE t1 (a INT, b INT,
 PRIMARY KEY (a),

mysql-test/r/information_schema.result

@@ -766,7 +766,6 @@ table_schema	table_name	column_name
 information_schema	COLUMNS	COLUMN_DEFAULT
 information_schema	COLUMNS	COLUMN_TYPE
 information_schema	EVENTS	EVENT_DEFINITION
-information_schema	EVENTS	SQL_MODE
 information_schema	PARTITIONS	PARTITION_EXPRESSION
 information_schema	PARTITIONS	SUBPARTITION_EXPRESSION
 information_schema	PARTITIONS	PARTITION_DESCRIPTION
@@ -776,8 +775,6 @@ information_schema	ROUTINES	ROUTINE_DEFINITION
 information_schema	ROUTINES	SQL_MODE
 information_schema	TRIGGERS	ACTION_CONDITION
 information_schema	TRIGGERS	ACTION_STATEMENT
-information_schema	TRIGGERS	SQL_MODE
-information_schema	TRIGGERS	DEFINER
 information_schema	VIEWS	VIEW_DEFINITION
 select table_name, column_name, data_type from information_schema.columns
 where data_type = 'datetime';
@@ -1654,4 +1651,13 @@ drop table t1;
 drop function f1;
 select * from information_schema.tables where 1=sleep(100000);
 select * from information_schema.columns where 1=sleep(100000);
+explain select count(*) from information_schema.tables;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
+1	SIMPLE	tables	ALL	NULL	NULL	NULL	NULL	NULL	Skip_open_table; Scanned all databases
+explain select count(*) from information_schema.columns;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
+1	SIMPLE	columns	ALL	NULL	NULL	NULL	NULL	NULL	Open_frm_only; Scanned all databases
+explain select count(*) from information_schema.views;
+id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
+1	SIMPLE	views	ALL	NULL	NULL	NULL	NULL	NULL	Open_frm_only; Scanned all databases
 End of 5.1 tests.

mysql-test/r/information_schema_part.result

@@ -119,7 +119,10 @@ SHOW CREATE TABLE t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) SUBPARTITION BY LINEAR HASH (a) (PARTITION p0 VALUES LESS THAN (10) ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+SUBPARTITION BY LINEAR HASH (a)
+(PARTITION p0 VALUES LESS THAN (10) ENGINE = MyISAM) */
 select SUBPARTITION_METHOD FROM information_schema.partitions WHERE
 table_schema="test" AND table_name="t1";
 SUBPARTITION_METHOD
@@ -134,7 +137,9 @@ SHOW CREATE TABLE t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY LIST (a) (PARTITION p0 VALUES IN (10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53) ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY LIST (a)
+(PARTITION p0 VALUES IN (10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53) ENGINE = MyISAM) */
 SELECT PARTITION_DESCRIPTION FROM information_schema.partitions WHERE
 table_schema = "test" AND table_name = "t1";
 PARTITION_DESCRIPTION

mysql-test/r/innodb_data_home_dir_basic.result

 '#---------------------BS_STVARS_025_01----------------------#'
 SELECT COUNT(@@GLOBAL.innodb_data_home_dir);
 COUNT(@@GLOBAL.innodb_data_home_dir)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_025_02----------------------#'
 SET @@GLOBAL.innodb_data_home_dir=1;
@@ -9,7 +9,7 @@ ERROR HY000: Variable 'innodb_data_home_dir' is a read only variable
 Expected error 'Read only variable'
 SELECT COUNT(@@GLOBAL.innodb_data_home_dir);
 COUNT(@@GLOBAL.innodb_data_home_dir)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_025_03----------------------#'
 SELECT @@GLOBAL.innodb_data_home_dir = VARIABLE_VALUE
@@ -20,7 +20,7 @@ NULL
 1 Expected
 SELECT COUNT(@@GLOBAL.innodb_data_home_dir);
 COUNT(@@GLOBAL.innodb_data_home_dir)
-0
+1
 1 Expected
 SELECT COUNT(VARIABLE_VALUE)
 FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES 
@@ -36,7 +36,7 @@ NULL
 '#---------------------BS_STVARS_025_05----------------------#'
 SELECT COUNT(@@innodb_data_home_dir);
 COUNT(@@innodb_data_home_dir)
-0
+1
 1 Expected
 SELECT COUNT(@@local.innodb_data_home_dir);
 ERROR HY000: Variable 'innodb_data_home_dir' is a GLOBAL variable
@@ -46,7 +46,7 @@ ERROR HY000: Variable 'innodb_data_home_dir' is a GLOBAL variable
 Expected error 'Variable is a GLOBAL variable'
 SELECT COUNT(@@GLOBAL.innodb_data_home_dir);
 COUNT(@@GLOBAL.innodb_data_home_dir)
-0
+1
 1 Expected
 SELECT innodb_data_home_dir = @@SESSION.innodb_data_home_dir;
 ERROR 42S22: Unknown column 'innodb_data_home_dir' in 'field list'

mysql-test/r/innodb_flush_method_basic.result

 '#---------------------BS_STVARS_029_01----------------------#'
 SELECT COUNT(@@GLOBAL.innodb_flush_method);
 COUNT(@@GLOBAL.innodb_flush_method)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_029_02----------------------#'
 SET @@GLOBAL.innodb_flush_method=1;
@@ -9,7 +9,7 @@ ERROR HY000: Variable 'innodb_flush_method' is a read only variable
 Expected error 'Read only variable'
 SELECT COUNT(@@GLOBAL.innodb_flush_method);
 COUNT(@@GLOBAL.innodb_flush_method)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_029_03----------------------#'
 SELECT @@GLOBAL.innodb_flush_method = VARIABLE_VALUE
@@ -20,7 +20,7 @@ NULL
 1 Expected
 SELECT COUNT(@@GLOBAL.innodb_flush_method);
 COUNT(@@GLOBAL.innodb_flush_method)
-0
+1
 1 Expected
 SELECT COUNT(VARIABLE_VALUE)
 FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES 
@@ -36,7 +36,7 @@ NULL
 '#---------------------BS_STVARS_029_05----------------------#'
 SELECT COUNT(@@innodb_flush_method);
 COUNT(@@innodb_flush_method)
-0
+1
 1 Expected
 SELECT COUNT(@@local.innodb_flush_method);
 ERROR HY000: Variable 'innodb_flush_method' is a GLOBAL variable
@@ -46,7 +46,7 @@ ERROR HY000: Variable 'innodb_flush_method' is a GLOBAL variable
 Expected error 'Variable is a GLOBAL variable'
 SELECT COUNT(@@GLOBAL.innodb_flush_method);
 COUNT(@@GLOBAL.innodb_flush_method)
-0
+1
 1 Expected
 SELECT innodb_flush_method = @@SESSION.innodb_flush_method;
 ERROR 42S22: Unknown column 'innodb_flush_method' in 'field list'

mysql-test/r/innodb_mysql.result

@@ -1668,3 +1668,12 @@ explain select a from t2 where a=b;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 1	SIMPLE	t2	index	NULL	a	10	NULL	#	Using where; Using index
 drop table t1, t2;
+SET SESSION BINLOG_FORMAT=STATEMENT;
+SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
+select @@session.sql_log_bin, @@session.binlog_format, @@session.tx_isolation;
+@@session.sql_log_bin	1
+@@session.binlog_format	STATEMENT
+@@session.tx_isolation	READ-COMMITTED
+CREATE TABLE t1 ( a INT ) ENGINE=InnoDB;
+INSERT INTO t1 VALUES(1);
+DROP TABLE t1;

mysql-test/r/limit.result

@@ -111,3 +111,6 @@ set @a=-14632475938453979136;
 execute s using @a, @a;
 ERROR HY000: Incorrect arguments to EXECUTE
 End of 5.0 tests
+select 1 as a limit 4294967296,10;
+a
+End of 5.1 tests

mysql-test/r/merge.result

@@ -830,7 +830,7 @@ ERROR HY000: Unable to open underlying table which is differently defined or of
 DROP TABLE t1, t2;
 CREATE TABLE t2(a INT) ENGINE=MERGE UNION=(t3);
 SELECT * FROM t2;
-ERROR 42S02: Table 'test.t3' doesn't exist
+ERROR HY000: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 DROP TABLE t2;
 CREATE TABLE t1(a INT, b TEXT);
 CREATE TABLE tm1(a TEXT, b INT) ENGINE=MERGE UNION=(t1);
@@ -895,17 +895,19 @@ drop table t2;
 drop table t1;
 CREATE TABLE tm1(a INT) ENGINE=MERGE UNION=(t1, t2);
 SELECT * FROM tm1;
-ERROR 42S02: Table 'test.t1' doesn't exist
+ERROR HY000: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 CHECK TABLE tm1;
 Table	Op	Msg_type	Msg_text
 test.tm1	check	Error	Table 'test.t1' doesn't exist
+test.tm1	check	Error	Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 test.tm1	check	error	Corrupt
 CREATE TABLE t1(a INT);
 SELECT * FROM tm1;
-ERROR 42S02: Table 'test.t2' doesn't exist
+ERROR HY000: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 CHECK TABLE tm1;
 Table	Op	Msg_type	Msg_text
 test.tm1	check	Error	Table 'test.t2' doesn't exist
+test.tm1	check	Error	Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 test.tm1	check	error	Corrupt
 CREATE TABLE t2(a BLOB);
 SELECT * FROM tm1;
@@ -1199,7 +1201,7 @@ c1
 3
 RENAME TABLE t2 TO t5;
 SELECT * FROM t3 ORDER BY c1;
-ERROR 42S02: Table 'test.t2' doesn't exist
+ERROR HY000: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 RENAME TABLE t5 TO t2;
 SELECT * FROM t3 ORDER BY c1;
 c1
@@ -1233,7 +1235,7 @@ UNLOCK TABLES;
 # 4. Alter table rename.
 ALTER TABLE t2 RENAME TO t5;
 SELECT * FROM t3 ORDER BY c1;
-ERROR 42S02: Table 'test.t2' doesn't exist
+ERROR HY000: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 ALTER TABLE t5 RENAME TO t2;
 SELECT * FROM t3 ORDER BY c1;
 c1
@@ -1317,7 +1319,7 @@ LOCK TABLES t1 WRITE, t2 WRITE;
 INSERT INTO t1 VALUES (1);
 DROP TABLE t1;
 SELECT * FROM t2;
-ERROR 42S02: Table 'test.t1' doesn't exist
+ERROR HY000: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
 SELECT * FROM t1;
 ERROR 42S02: Table 'test.t1' doesn't exist
 UNLOCK TABLES;
@@ -2006,6 +2008,13 @@ test.t1	optimize	status	OK
 FLUSH TABLES m1, t1;
 UNLOCK TABLES;
 DROP TABLE t1, m1;
+CREATE TABLE tm1 (c1 INT) ENGINE=MRG_MYISAM UNION=(t1) INSERT_METHOD=FIRST;
+SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE
+TABLE_SCHEMA = 'test' and TABLE_NAME='tm1';
+TABLE_CATALOG	TABLE_SCHEMA	TABLE_NAME	TABLE_TYPE	ENGINE	VERSION	ROW_FORMAT	TABLE_ROWS	AVG_ROW_LENGTH	DATA_LENGTH	MAX_DATA_LENGTH	INDEX_LENGTH	DATA_FREE	AUTO_INCREMENT	CREATE_TIME	UPDATE_TIME	CHECK_TIME	TABLE_COLLATION	CHECKSUM	CREATE_OPTIONS	TABLE_COMMENT
+NULL	test	tm1	BASE TABLE	NULL	NULL	NULL	#	#	#	#	#	#	#	#	#	#	NULL	#	#	Unable to open underlying table which is differently defined or of non-MyISAM ty
+DROP TABLE tm1;
+End of 5.1 tests
 CREATE TABLE t1(C1 INT, C2 INT, KEY C1(C1), KEY C2(C2)) ENGINE=MYISAM;
 CREATE TABLE t2(C1 INT, C2 INT, KEY C1(C1), KEY C2(C2)) ENGINE=MYISAM;
 CREATE TABLE t3(C1 INT, C2 INT, KEY C1(C1), KEY C2(C2)) ENGINE=MYISAM;

mysql-test/r/metadata.result

@@ -181,4 +181,21 @@ c1	c2
 3	3
 DROP VIEW v1,v2;
 DROP TABLE t1,t2;
+CREATE TABLE t1 (i INT, d DATE);
+INSERT INTO t1 VALUES (1, '2008-01-01'), (2, '2008-01-02'), (3, '2008-01-03');
+SELECT COALESCE(d, d), IFNULL(d, d), IF(i, d, d),
+CASE i WHEN i THEN d ELSE d END, GREATEST(d, d), LEAST(d, d)
+FROM t1 ORDER BY RAND();
+Catalog	Database	Table	Table_alias	Column	Column_alias	Type	Length	Max length	Is_null	Flags	Decimals	Charsetnr
+2008-01-01	2008-01-01	2008-01-01	2008-01-01	2008-01-01	2008-01-01
+2008-01-02	2008-01-02	2008-01-02	2008-01-02	2008-01-02	2008-01-02
+2008-01-03	2008-01-03	2008-01-03	2008-01-03	2008-01-03	2008-01-03
+COALESCE(d, d)	IFNULL(d, d)	IF(i, d, d)	CASE i WHEN i THEN d ELSE d END	GREATEST(d, d)	LEAST(d, d)
+def				CASE i WHEN i THEN d ELSE d END	CASE i WHEN i THEN d ELSE d END	10	10	10	Y	128	0	63
+def				COALESCE(d, d)	COALESCE(d, d)	10	10	10	Y	128	0	63
+def				GREATEST(d, d)	GREATEST(d, d)	10	10	10	Y	128	0	63
+def				IF(i, d, d)	IF(i, d, d)	10	10	10	Y	128	0	63
+def				IFNULL(d, d)	IFNULL(d, d)	10	10	10	Y	128	0	63
+def				LEAST(d, d)	LEAST(d, d)	10	10	10	Y	128	0	63
+DROP TABLE t1;
 End of 5.0 tests

mysql-test/r/mysql_upgrade.result

@@ -97,7 +97,7 @@ mysql.time_zone_transition_type                    OK
 mysql.user                                         OK
 DROP USER mysqltest1@'%';
 Run mysql_upgrade with a non existing server socket
-mysqlcheck: Got error: 2003: Can't connect to MySQL server on 'not_existing_host' (errno) when trying to connect
+mysqlcheck: Got error: 2005: Unknown MySQL server host 'not_existing_host' (errno) when trying to connect
 FATAL ERROR: Upgrade failed
 set GLOBAL sql_mode='STRICT_ALL_TABLES,ANSI_QUOTES,NO_ZERO_DATE';
 mtr.global_suppressions                            OK

mysql-test/r/order_by.result

@@ -1428,6 +1428,22 @@ set session max_sort_length= 2180;
 select * from t1 order by b;
 ERROR HY001: Out of sort memory; increase server sort buffer size
 drop table t1;
+#
+# Bug #39844: Query Crash Mysql Server 5.0.67
+#
+CREATE TABLE t1 (a INT PRIMARY KEY);
+CREATE TABLE t2 (a INT PRIMARY KEY, b INT);
+CREATE TABLE t3 (c INT);
+INSERT INTO t1 (a) VALUES (1), (2);
+INSERT INTO t2 (a,b) VALUES (1,2), (2,3);
+INSERT INTO t3 (c) VALUES (1), (2);
+SELECT
+(SELECT t1.a FROM t1, t2 WHERE t1.a = t2.b AND t2.a = t3.c ORDER BY t1.a)
+FROM t3;
+(SELECT t1.a FROM t1, t2 WHERE t1.a = t2.b AND t2.a = t3.c ORDER BY t1.a)
+2
+NULL
+DROP TABLE t1, t2, t3;
 CREATE TABLE t2 (a varchar(32), b int(11), c float, d double, 
 UNIQUE KEY a (a,b,c), KEY b (b), KEY c (c));
 CREATE TABLE t1 (a varchar(32), b char(3), UNIQUE KEY a (a,b), KEY b (b));

mysql-test/r/partition_archive.result

@@ -60,7 +60,8 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=ARCHIVE DEFAULT CHARSET=latin1 /*!50100 PARTITION BY HASH (a)  */
+) ENGINE=ARCHIVE DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY HASH (a) */
 drop table t1;
 CREATE TABLE t1(id MEDIUMINT NOT NULL AUTO_INCREMENT,
 f1 VARCHAR(25),
@@ -84,7 +85,21 @@ t1	CREATE TABLE `t1` (
   `id` mediumint(9) NOT NULL AUTO_INCREMENT,
   `f1` varchar(25) DEFAULT NULL,
   PRIMARY KEY (`id`)
-) ENGINE=ARCHIVE AUTO_INCREMENT=101 DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (id) SUBPARTITION BY HASH (id) SUBPARTITIONS 2 (PARTITION pa1 VALUES LESS THAN (10) ENGINE = ARCHIVE, PARTITION pa2 VALUES LESS THAN (20) ENGINE = ARCHIVE, PARTITION pa3 VALUES LESS THAN (30) ENGINE = ARCHIVE, PARTITION pa4 VALUES LESS THAN (40) ENGINE = ARCHIVE, PARTITION pa5 VALUES LESS THAN (50) ENGINE = ARCHIVE, PARTITION pa6 VALUES LESS THAN (60) ENGINE = ARCHIVE, PARTITION pa7 VALUES LESS THAN (70) ENGINE = ARCHIVE, PARTITION pa8 VALUES LESS THAN (80) ENGINE = ARCHIVE, PARTITION pa9 VALUES LESS THAN (90) ENGINE = ARCHIVE, PARTITION pa10 VALUES LESS THAN (100) ENGINE = ARCHIVE, PARTITION pa11 VALUES LESS THAN MAXVALUE ENGINE = ARCHIVE) */
+) ENGINE=ARCHIVE AUTO_INCREMENT=101 DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (id)
+SUBPARTITION BY HASH (id)
+SUBPARTITIONS 2
+(PARTITION pa1 VALUES LESS THAN (10) ENGINE = ARCHIVE,
+ PARTITION pa2 VALUES LESS THAN (20) ENGINE = ARCHIVE,
+ PARTITION pa3 VALUES LESS THAN (30) ENGINE = ARCHIVE,
+ PARTITION pa4 VALUES LESS THAN (40) ENGINE = ARCHIVE,
+ PARTITION pa5 VALUES LESS THAN (50) ENGINE = ARCHIVE,
+ PARTITION pa6 VALUES LESS THAN (60) ENGINE = ARCHIVE,
+ PARTITION pa7 VALUES LESS THAN (70) ENGINE = ARCHIVE,
+ PARTITION pa8 VALUES LESS THAN (80) ENGINE = ARCHIVE,
+ PARTITION pa9 VALUES LESS THAN (90) ENGINE = ARCHIVE,
+ PARTITION pa10 VALUES LESS THAN (100) ENGINE = ARCHIVE,
+ PARTITION pa11 VALUES LESS THAN MAXVALUE ENGINE = ARCHIVE) */
 select count(*) from t1;
 count(*)
 100

mysql-test/r/partition_datatype.result

@@ -326,7 +326,11 @@ Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` bit(27) NOT NULL DEFAULT '\0\0\0\0',
   PRIMARY KEY (`a`)
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY HASH (a) (PARTITION p0 ENGINE = MyISAM, PARTITION p1 ENGINE = MyISAM, PARTITION p2 ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY HASH (a)
+(PARTITION p0 ENGINE = MyISAM,
+ PARTITION p1 ENGINE = MyISAM,
+ PARTITION p2 ENGINE = MyISAM) */
 insert into t1 values (1),(4),(7),(10),(13),(16),(19),(22),(25),(28),(31),(34);
 select hex(a) from t1 where a = 7;
 hex(a)

mysql-test/r/partition_innodb.result

+# Bug#37721, test of ORDER BY on PK and WHERE on INDEX
+CREATE TABLE t1 (
+a INT,
+b INT,
+PRIMARY KEY (a),
+INDEX (b))
+ENGINE InnoDB
+PARTITION BY HASH(a)
+PARTITIONS 3;
+INSERT INTO t1 VALUES (0,0),(4,0),(2,0);
+SELECT a FROM t1 WHERE b = 0 ORDER BY a ASC;
+a
+0
+2
+4
+SELECT a FROM t1 WHERE b = 0 ORDER BY a DESC;
+a
+4
+2
+0
+ALTER TABLE t1 DROP INDEX b;
+SELECT a FROM t1 WHERE b = 0 ORDER BY a ASC;
+a
+0
+2
+4
+SELECT a FROM t1 WHERE b = 0 ORDER BY a DESC;
+a
+4
+2
+0
+DROP TABLE t1;
+CREATE TABLE t1 (
+a VARCHAR(600),
+b VARCHAR(600),
+PRIMARY KEY (a),
+INDEX (b))
+ENGINE InnoDB
+PARTITION BY KEY(a)
+PARTITIONS 3;
+INSERT INTO t1 VALUES (concat(repeat('MySQL',100),'1'),repeat('0',257));
+INSERT INTO t1 VALUES (concat(repeat('MySQL',100),'3'),repeat('0',257));
+INSERT INTO t1 VALUES (concat(repeat('MySQL',100),'2'),repeat('0',257));
+SELECT right(a,1) FROM t1 WHERE b = repeat('0',257) ORDER BY a ASC;
+right(a,1)
+1
+2
+3
+SELECT right(a,1) FROM t1 WHERE b = repeat('0',257) ORDER BY a DESC;
+right(a,1)
+3
+2
+1
+ALTER TABLE t1 DROP INDEX b;
+SELECT right(a,1) FROM t1 WHERE b = repeat('0',257) ORDER BY a ASC;
+right(a,1)
+1
+2
+3
+SELECT right(a,1) FROM t1 WHERE b = repeat('0',257) ORDER BY a DESC;
+right(a,1)
+3
+2
+1
+DROP TABLE t1;
 # Bug#32948
 CREATE TABLE t1 (c1 INT, PRIMARY KEY (c1)) ENGINE=INNODB;
 CREATE TABLE t2 (c1 INT, PRIMARY KEY (c1),
@@ -72,7 +137,8 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a)  */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a) */
 drop table t1;
 create table t1 (a int)
 engine = innodb
@@ -84,7 +150,9 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=InnoDB DEFAULT CHARSET=latin1 /*!50100 PARTITION BY LIST (a) (PARTITION p0 VALUES IN (0) ENGINE = InnoDB) */
+) ENGINE=InnoDB DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY LIST (a)
+(PARTITION p0 VALUES IN (0) ENGINE = InnoDB) */
 drop table t1;
 create table t1
 (
@@ -160,5 +228,9 @@ Table	Create Table
 t1	CREATE TABLE `t1` (
   `int_column` int(11) DEFAULT NULL,
   `char_column` char(5) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (int_column) SUBPARTITION BY KEY (char_column) SUBPARTITIONS 2 (PARTITION p1 VALUES LESS THAN (5) ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (int_column)
+SUBPARTITION BY KEY (char_column)
+SUBPARTITIONS 2
+(PARTITION p1 VALUES LESS THAN (5) ENGINE = MyISAM) */
 drop table t1;

mysql-test/r/partition_innodb_stmt.result

+# connection default
+SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
+CREATE TABLE t1
+(
+id SMALLINT NOT NULL,
+PRIMARY KEY (id)
+) ENGINE=innodb
+PARTITION BY RANGE (id)
+(
+PARTITION p1 VALUES LESS THAN (2),
+PARTITION p2 VALUES LESS THAN (4),
+PARTITION p3 VALUES LESS THAN (10)
+);
+INSERT INTO t1 VALUES (1),(2),(3);
+# Test READ COMMITTED -> REPEATABLE READ
+FLUSH TABLES;
+SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
+BEGIN;
+SELECT * FROM t1;
+id
+1
+2
+3
+#connection con1
+SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
+BEGIN;
+INSERT INTO t1 VALUES(7);
+COMMIT;
+# connection default
+COMMIT;
+FLUSH TABLES;
+# Test REPEATABLE READ -> READ COMMITTED
+SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
+BEGIN;
+SELECT * FROM t1;
+id
+1
+2
+3
+7
+# connection con1
+SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
+BEGIN;
+INSERT INTO t1 VALUES(9);
+ERROR HY000: Binary logging not possible. Message: Transaction level 'READ-COMMITTED' in InnoDB is not safe for binlog mode 'STATEMENT'
+COMMIT;
+COMMIT;
+DROP TABLE t1;

mysql-test/r/partition_mgm.result

@@ -16,14 +16,18 @@ Table	Create Table
 t1	CREATE TABLE `t1` (
   `f_date` date DEFAULT NULL,
   `f_varchar` varchar(30) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY HASH (YEAR(f_date)) PARTITIONS 2  */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY HASH (YEAR(f_date))
+PARTITIONS 2 */
 ALTER TABLE t1 COALESCE PARTITION 1;
 SHOW CREATE TABLE t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `f_date` date DEFAULT NULL,
   `f_varchar` varchar(30) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY HASH (YEAR(f_date)) PARTITIONS 1  */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY HASH (YEAR(f_date))
+PARTITIONS 1 */
 drop table t1;
 create table t1 (a int)
 partition by list (a)
@@ -36,3 +40,42 @@ alter table t1 REORGANIZE partition p1 INTO
 (partition p11 values in (1,2),
 partition p12 values in (3,4));
 drop table t1;
+CREATE TABLE t1 (a INT)
+/*!50100 PARTITION BY HASH (a)
+/* Test
+of multi-line
+comment */
+PARTITIONS 5 */;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '*/' at line 6
+CREATE TABLE t1 (a INT)
+/*!50100 PARTITION BY HASH (a)
+-- with a single line comment embedded
+PARTITIONS 5 */;
+SHOW CREATE TABLE t1;
+Table	Create Table
+t1	CREATE TABLE `t1` (
+  `a` int(11) DEFAULT NULL
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY HASH (a)
+PARTITIONS 5 */
+DROP TABLE t1;
+CREATE TABLE t1 (a INT)
+/*!50100 PARTITION BY HASH (a)
+PARTITIONS 5 */;
+SHOW CREATE TABLE t1;
+Table	Create Table
+t1	CREATE TABLE `t1` (
+  `a` int(11) DEFAULT NULL
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY HASH (a)
+PARTITIONS 5 */
+DROP TABLE t1;
+CREATE TABLE t1 (a INT) /*!50100 PARTITION BY HASH (a) PARTITIONS 5 */;
+SHOW CREATE TABLE t1;
+Table	Create Table
+t1	CREATE TABLE `t1` (
+  `a` int(11) DEFAULT NULL
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY HASH (a)
+PARTITIONS 5 */
+DROP TABLE t1;

mysql-test/r/partition_mgm_err.result

@@ -84,6 +84,14 @@ ALTER TABLE t1 DROP PARTITION x1;
 ERROR HY000: Partition management on a not partitioned table is not possible
 ALTER TABLE t1 COALESCE PARTITION 1;
 ERROR HY000: Partition management on a not partitioned table is not possible
+ALTER TABLE t1 ANALYZE PARTITION p1;
+ERROR HY000: Partition management on a not partitioned table is not possible
+ALTER TABLE t1 CHECK PARTITION p1;
+ERROR HY000: Partition management on a not partitioned table is not possible
+ALTER TABLE t1 OPTIMIZE PARTITION p1;
+ERROR HY000: Partition management on a not partitioned table is not possible
+ALTER TABLE t1 REPAIR PARTITION p1;
+ERROR HY000: Partition management on a not partitioned table is not possible
 DROP TABLE t1;
 CREATE TABLE t1 (a int)
 PARTITION BY KEY (a)
@@ -136,7 +144,9 @@ SHOW CREATE TABLE t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a) PARTITIONS 2  */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a)
+PARTITIONS 2 */
 DROP TABLE t1;
 CREATE TABLE t1 (a INT) PARTITION BY HASH(a);
 ALTER TABLE t1 ADD PARTITION PARTITIONS 4;

mysql-test/r/partition_not_windows.result

@@ -24,13 +24,15 @@ data directory='/not/existing'
   index directory='/not/existing'
 );
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
-Warning	0	INDEX DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
 show create table t2;
 Table	Create Table
 t2	CREATE TABLE `t2` (
   `i` int(11) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (i) (PARTITION p01 VALUES LESS THAN (1000) ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (i)
+(PARTITION p01 VALUES LESS THAN (1000) ENGINE = MyISAM) */
 DROP TABLE t1, t2;
 set @@sql_mode=@org_mode;
 CREATE TABLE t1(a INT)

mysql-test/r/partition_range.result

@@ -8,7 +8,9 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) (PARTITION p0 VALUES LESS THAN MAXVALUE ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+(PARTITION p0 VALUES LESS THAN MAXVALUE ENGINE = MyISAM) */
 drop table t1;
 create table t1 (a integer)
 partition by range (a)
@@ -137,7 +139,11 @@ t1	CREATE TABLE `t1` (
   `b` int(11) NOT NULL,
   `c` int(11) NOT NULL,
   PRIMARY KEY (`a`,`b`)
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) (PARTITION x1 VALUES LESS THAN (5) TABLESPACE = ts1 ENGINE = MyISAM, PARTITION x2 VALUES LESS THAN (10) TABLESPACE = ts2 ENGINE = MyISAM, PARTITION x3 VALUES LESS THAN MAXVALUE TABLESPACE = ts3 ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+(PARTITION x1 VALUES LESS THAN (5) TABLESPACE = ts1 ENGINE = MyISAM,
+ PARTITION x2 VALUES LESS THAN (10) TABLESPACE = ts2 ENGINE = MyISAM,
+ PARTITION x3 VALUES LESS THAN MAXVALUE TABLESPACE = ts3 ENGINE = MyISAM) */
 ALTER TABLE t1
 partition by range (a)
 partitions 3
@@ -157,7 +163,11 @@ t1	CREATE TABLE `t1` (
   `b` int(11) NOT NULL,
   `c` int(11) NOT NULL,
   PRIMARY KEY (`a`,`b`)
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) (PARTITION x1 VALUES LESS THAN (5) TABLESPACE = ts1 ENGINE = MyISAM, PARTITION x2 VALUES LESS THAN (10) TABLESPACE = ts2 ENGINE = MyISAM, PARTITION x3 VALUES LESS THAN MAXVALUE TABLESPACE = ts3 ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+(PARTITION x1 VALUES LESS THAN (5) TABLESPACE = ts1 ENGINE = MyISAM,
+ PARTITION x2 VALUES LESS THAN (10) TABLESPACE = ts2 ENGINE = MyISAM,
+ PARTITION x3 VALUES LESS THAN MAXVALUE TABLESPACE = ts3 ENGINE = MyISAM) */
 drop table if exists t1;
 CREATE TABLE t1 (
 a int not null,
@@ -254,7 +264,15 @@ t1	CREATE TABLE `t1` (
   `b` int(11) NOT NULL,
   `c` int(11) NOT NULL,
   PRIMARY KEY (`a`,`b`)
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) SUBPARTITION BY HASH (a+b) (PARTITION x1 VALUES LESS THAN (1) (SUBPARTITION x11 ENGINE = MyISAM, SUBPARTITION x12 ENGINE = MyISAM), PARTITION x2 VALUES LESS THAN (5) (SUBPARTITION x21 ENGINE = MyISAM, SUBPARTITION x22 ENGINE = MyISAM)) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+SUBPARTITION BY HASH (a+b)
+(PARTITION x1 VALUES LESS THAN (1)
+ (SUBPARTITION x11 ENGINE = MyISAM,
+  SUBPARTITION x12 ENGINE = MyISAM),
+ PARTITION x2 VALUES LESS THAN (5)
+ (SUBPARTITION x21 ENGINE = MyISAM,
+  SUBPARTITION x22 ENGINE = MyISAM)) */
 ALTER TABLE t1 ADD COLUMN d int;
 show create table t1;
 Table	Create Table
@@ -264,7 +282,15 @@ t1	CREATE TABLE `t1` (
   `c` int(11) NOT NULL,
   `d` int(11) DEFAULT NULL,
   PRIMARY KEY (`a`,`b`)
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) SUBPARTITION BY HASH (a+b) (PARTITION x1 VALUES LESS THAN (1) (SUBPARTITION x11 ENGINE = MyISAM, SUBPARTITION x12 ENGINE = MyISAM), PARTITION x2 VALUES LESS THAN (5) (SUBPARTITION x21 ENGINE = MyISAM, SUBPARTITION x22 ENGINE = MyISAM)) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+SUBPARTITION BY HASH (a+b)
+(PARTITION x1 VALUES LESS THAN (1)
+ (SUBPARTITION x11 ENGINE = MyISAM,
+  SUBPARTITION x12 ENGINE = MyISAM),
+ PARTITION x2 VALUES LESS THAN (5)
+ (SUBPARTITION x21 ENGINE = MyISAM,
+  SUBPARTITION x22 ENGINE = MyISAM)) */
 drop table t1;
 CREATE TABLE t1 (
 a int not null,
@@ -487,7 +513,10 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` bigint(20) unsigned DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) (PARTITION p0 VALUES LESS THAN (0) ENGINE = MyISAM, PARTITION p1 VALUES LESS THAN (10) ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+(PARTITION p0 VALUES LESS THAN (0) ENGINE = MyISAM,
+ PARTITION p1 VALUES LESS THAN (10) ENGINE = MyISAM) */
 drop table t1;
 create table t1 (a bigint unsigned)
 partition by range (a)
@@ -497,7 +526,10 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` bigint(20) unsigned DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (a) (PARTITION p0 VALUES LESS THAN (2) ENGINE = MyISAM, PARTITION p1 VALUES LESS THAN (10) ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (a)
+(PARTITION p0 VALUES LESS THAN (2) ENGINE = MyISAM,
+ PARTITION p1 VALUES LESS THAN (10) ENGINE = MyISAM) */
 insert into t1 values (0xFFFFFFFFFFFFFFFF);
 ERROR HY000: Table has no partition for value 18446744073709551615
 drop table t1;

mysql-test/r/partition_symlink.result

@@ -101,13 +101,15 @@ data directory='/not/existing'
     index directory='/not/existing'
 );
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
-Warning	0	INDEX DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
 show create table t2;
 Table	Create Table
 t2	CREATE TABLE `t2` (
   `i` int(11) DEFAULT NULL
-) ENGINE=MyISAM DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (i) (PARTITION p01 VALUES LESS THAN (1000) ENGINE = MyISAM) */
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (i)
+(PARTITION p01 VALUES LESS THAN (1000) ENGINE = MyISAM) */
 DROP TABLE t1, t2;
 set @@sql_mode=@org_mode;
 create table t1 (a int)

mysql-test/r/partition_windows.result

@@ -15,16 +15,16 @@ DATA DIRECTORY = 'E:/mysqltest/p2Data'
     INDEX DIRECTORY = 'F:/mysqltest/p2Index'
 );
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
-Warning	0	INDEX DIRECTORY option ignored
-Warning	0	DATA DIRECTORY option ignored
-Warning	0	INDEX DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
 INSERT INTO t1 VALUES (NULL, "first", 1);
 INSERT INTO t1 VALUES (NULL, "second", 2);
 INSERT INTO t1 VALUES (NULL, "third", 3);
 ALTER TABLE t1 ADD PARTITION (PARTITION p3 DATA DIRECTORY = 'G:/mysqltest/p3Data' INDEX DIRECTORY = 'H:/mysqltest/p3Index');
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
-Warning	0	INDEX DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
 INSERT INTO t1 VALUES (NULL, "last", 4);
 DROP TABLE t1;

mysql-test/r/ps_11bugs.result

@@ -162,4 +162,32 @@ a	b
 12	NULL
 drop table t1;
 drop table t2;
+CREATE TABLE t1 (a INT);
+PREPARE stmt FROM 'select 1 from `t1` where `a` = any (select (@@tmpdir))';
+EXECUTE stmt;
+1
+DEALLOCATE PREPARE stmt;
+DROP TABLE t1;
+CREATE TABLE t2 (a INT PRIMARY KEY);
+INSERT INTO t2 VALUES (400000), (400001);
+SET @@sort_buffer_size=400000;
+CREATE FUNCTION p1(i INT) RETURNS INT
+BEGIN
+SET @@sort_buffer_size= i;
+RETURN i + 1;
+END|
+SELECT * FROM t2 WHERE a = @@sort_buffer_size AND p1(@@sort_buffer_size + 1) > a - 1;
+a
+400000
+DROP TABLE t2;
+DROP FUNCTION p1;
+SELECT CONCAT(@@sort_buffer_size);
+CONCAT(@@sort_buffer_size)
+400001
+SELECT LEFT("12345", @@ft_boolean_syntax);
+LEFT("12345", @@ft_boolean_syntax)
+
+Warnings:
+Warning	1292	Truncated incorrect INTEGER value: '+ -><()~*:""&|'
+SET @@sort_buffer_size=DEFAULT;
 End of 5.0 tests.

mysql-test/r/show_check.result

@@ -1002,8 +1002,8 @@ def			TRIGGERS	EVENT_OBJECT_TABLE	Table	253	192	2	N	1	0	33
 def			TRIGGERS	ACTION_STATEMENT	Statement	252	589815	10	N	17	0	33
 def			TRIGGERS	ACTION_TIMING	Timing	253	18	6	N	1	0	33
 def			TRIGGERS	CREATED	Created	12	19	0	Y	128	0	63
-def			TRIGGERS	SQL_MODE	sql_mode	252	589815	0	N	17	0	33
-def			TRIGGERS	DEFINER	Definer	252	589815	14	N	17	0	33
+def			TRIGGERS	SQL_MODE	sql_mode	253	24576	0	N	1	0	33
+def			TRIGGERS	DEFINER	Definer	253	231	14	N	1	0	33
 def			TRIGGERS	CHARACTER_SET_CLIENT	character_set_client	253	96	6	N	1	0	33
 def			TRIGGERS	COLLATION_CONNECTION	collation_connection	253	96	6	N	1	0	33
 def			TRIGGERS	DATABASE_COLLATION	Database Collation	253	96	17	N	1	0	33
@@ -1046,8 +1046,8 @@ def			TRIGGERS	ACTION_REFERENCE_OLD_TABLE	ACTION_REFERENCE_OLD_TABLE	253	192	0	Y
 def			TRIGGERS	ACTION_REFERENCE_NEW_TABLE	ACTION_REFERENCE_NEW_TABLE	253	192	0	Y	0	0	33
 def			TRIGGERS	ACTION_REFERENCE_OLD_ROW	ACTION_REFERENCE_OLD_ROW	253	9	3	N	1	0	33
 def			TRIGGERS	ACTION_REFERENCE_NEW_ROW	ACTION_REFERENCE_NEW_ROW	253	9	3	N	1	0	33
-def			TRIGGERS	SQL_MODE	SQL_MODE	252	589815	0	N	17	0	33
-def			TRIGGERS	DEFINER	DEFINER	252	589815	14	N	17	0	33
+def			TRIGGERS	SQL_MODE	SQL_MODE	253	24576	0	N	1	0	33
+def			TRIGGERS	DEFINER	DEFINER	253	231	14	N	1	0	33
 TRIGGER_CATALOG	TRIGGER_SCHEMA	TRIGGER_NAME	EVENT_MANIPULATION	EVENT_OBJECT_CATALOG	EVENT_OBJECT_SCHEMA	EVENT_OBJECT_TABLE	ACTION_CONDITION	ACTION_STATEMENT	ACTION_ORIENTATION	ACTION_TIMING	ACTION_REFERENCE_OLD_TABLE	ACTION_REFERENCE_NEW_TABLE	ACTION_REFERENCE_OLD_ROW	ACTION_REFERENCE_NEW_ROW	SQL_MODE	DEFINER
 NULL	test	t1_bi	INSERT	NULL	test	t1	NULL	SET @a = 1	ROW	BEFORE	NULL	NULL	OLD	NEW		root@localhost
 ----------------------------------------------------------------

mysql-test/r/sp.result

@@ -6820,6 +6820,24 @@ ttt
 2
 drop function func30787;
 drop table t1;
+CREATE TABLE t1 (id INT);
+INSERT INTO t1 VALUES (1),(2),(3),(4);
+CREATE PROCEDURE test_sp()
+SELECT t1.* FROM t1 RIGHT JOIN t1 t2 ON t1.id=t2.id;
+CALL test_sp();
+id
+1
+2
+3
+4
+CALL test_sp();
+id
+1
+2
+3
+4
+DROP PROCEDURE test_sp;
+DROP TABLE t1;
 create table t1(c1 INT);
 create function f1(p1 int) returns varchar(32)
 return 'aaa';
@@ -6846,6 +6864,19 @@ select substr(`str`, `pos`+ 1 ) into `str`;
 end $
 call `p2`('s s s s s s');
 drop procedure `p2`;
+drop table if exists t1;
+drop procedure if exists p1;
+create procedure p1() begin select * from t1; end$
+call p1$
+ERROR 42S02: Table 'test.t1' doesn't exist
+create table t1 (a integer)$
+call p1$
+a
+alter table t1 add b integer;
+call p1$
+a
+drop table t1;
+drop procedure p1;
 # ------------------------------------------------------------------
 # -- End of 5.0 tests
 # ------------------------------------------------------------------

mysql-test/r/ssl_capath_basic.result

 '#---------------------BS_STVARS_046_01----------------------#'
 SELECT COUNT(@@GLOBAL.ssl_capath);
 COUNT(@@GLOBAL.ssl_capath)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_046_02----------------------#'
 SET @@GLOBAL.ssl_capath=1;
@@ -9,7 +9,7 @@ ERROR HY000: Variable 'ssl_capath' is a read only variable
 Expected error 'Read only variable'
 SELECT COUNT(@@GLOBAL.ssl_capath);
 COUNT(@@GLOBAL.ssl_capath)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_046_03----------------------#'
 SELECT @@GLOBAL.ssl_capath = VARIABLE_VALUE
@@ -20,7 +20,7 @@ NULL
 1 Expected
 SELECT COUNT(@@GLOBAL.ssl_capath);
 COUNT(@@GLOBAL.ssl_capath)
-0
+1
 1 Expected
 SELECT COUNT(VARIABLE_VALUE)
 FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES 
@@ -36,7 +36,7 @@ NULL
 '#---------------------BS_STVARS_046_05----------------------#'
 SELECT COUNT(@@ssl_capath);
 COUNT(@@ssl_capath)
-0
+1
 1 Expected
 SELECT COUNT(@@local.ssl_capath);
 ERROR HY000: Variable 'ssl_capath' is a GLOBAL variable
@@ -46,7 +46,7 @@ ERROR HY000: Variable 'ssl_capath' is a GLOBAL variable
 Expected error 'Variable is a GLOBAL variable'
 SELECT COUNT(@@GLOBAL.ssl_capath);
 COUNT(@@GLOBAL.ssl_capath)
-0
+1
 1 Expected
 SELECT ssl_capath = @@SESSION.ssl_capath;
 ERROR 42S22: Unknown column 'ssl_capath' in 'field list'

mysql-test/r/ssl_cipher_basic.result

 '#---------------------BS_STVARS_048_01----------------------#'
 SELECT COUNT(@@GLOBAL.ssl_cipher);
 COUNT(@@GLOBAL.ssl_cipher)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_048_02----------------------#'
 SET @@GLOBAL.ssl_cipher=1;
@@ -9,7 +9,7 @@ ERROR HY000: Variable 'ssl_cipher' is a read only variable
 Expected error 'Read only variable'
 SELECT COUNT(@@GLOBAL.ssl_cipher);
 COUNT(@@GLOBAL.ssl_cipher)
-0
+1
 1 Expected
 '#---------------------BS_STVARS_048_03----------------------#'
 SELECT @@GLOBAL.ssl_cipher = VARIABLE_VALUE
@@ -20,7 +20,7 @@ NULL
 1 Expected
 SELECT COUNT(@@GLOBAL.ssl_cipher);
 COUNT(@@GLOBAL.ssl_cipher)
-0
+1
 1 Expected
 SELECT COUNT(VARIABLE_VALUE)
 FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES 
@@ -36,7 +36,7 @@ NULL
 '#---------------------BS_STVARS_048_05----------------------#'
 SELECT COUNT(@@ssl_cipher);
 COUNT(@@ssl_cipher)
-0
+1
 1 Expected
 SELECT COUNT(@@local.ssl_cipher);
 ERROR HY000: Variable 'ssl_cipher' is a GLOBAL variable
@@ -46,7 +46,7 @@ ERROR HY000: Variable 'ssl_cipher' is a GLOBAL variable
 Expected error 'Variable is a GLOBAL variable'
 SELECT COUNT(@@GLOBAL.ssl_cipher);
 COUNT(@@GLOBAL.ssl_cipher)
-0
+1
 1 Expected
 SELECT ssl_cipher = @@SESSION.ssl_cipher;
 ERROR 42S22: Unknown column 'ssl_cipher' in 'field list'

mysql-test/r/subselect3.result

@@ -779,6 +779,22 @@ SELECT 1 FROM t1 WHERE t1.a NOT IN (SELECT 1 FROM t1, t2 WHERE 0);
 1
 1
 DROP TABLE t1, t2;
+CREATE TABLE t1 (
+pk INT PRIMARY KEY,
+int_key INT,
+varchar_key VARCHAR(5) UNIQUE,
+varchar_nokey VARCHAR(5)
+);
+INSERT INTO t1 VALUES (9, 7,NULL,NULL), (10,8,'p' ,'p');
+SELECT varchar_nokey
+FROM t1
+WHERE NULL NOT IN (
+SELECT INNR.pk FROM t1 AS INNR2
+LEFT JOIN t1 AS INNR ON ( INNR2.int_key = INNR.int_key )
+WHERE INNR.varchar_key > 'n{'
+);
+varchar_nokey
+DROP TABLE t1;
 End of 5.0 tests
 create table t0 (a int);
 insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);

mysql-test/r/symlink.result

@@ -79,7 +79,7 @@ drop database mysqltest;
 create table t1 (a int not null) engine=myisam;
 alter table t1 data directory="MYSQLTEST_VARDIR/tmp";
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
@@ -88,7 +88,7 @@ t1	CREATE TABLE `t1` (
 alter table t1 add b int;
 alter table t1 data directory="MYSQLTEST_VARDIR/log";
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
@@ -97,7 +97,7 @@ t1	CREATE TABLE `t1` (
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 alter table t1 index directory="MYSQLTEST_VARDIR/log";
 Warnings:
-Warning	0	INDEX DIRECTORY option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
@@ -164,8 +164,8 @@ ERROR HY000: Can't create/write to file 'TEST_DIR/master-data_var/t1.MYI' (Errco
 SET @OLD_SQL_MODE=@@SQL_MODE, @@SQL_MODE='NO_DIR_IN_CREATE';
 CREATE TABLE t1(a INT) DATA DIRECTORY='MYSQLTEST_VARDIR/tmp' INDEX DIRECTORY='MYSQLTEST_VARDIR/tmp';
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
-Warning	0	INDEX DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
 DROP TABLE t1;
 SET @@SQL_MODE=@OLD_SQL_MODE;
 End of 5.1 tests

mysql-test/r/thread_cache_size_func.result

@@ -2,67 +2,31 @@ SET @global_thread_cache_size = @@GLOBAL.thread_cache_size;
 FLUSH STATUS;
 '# Test1#'
 SET @@GLOBAL.thread_cache_size=3;
-Saving threads cached, threads created values
 SHOW STATUS LIKE 'Threads_cached';
 Variable_name	Value
 Threads_cached	0
 0 Expected
-'#Old value for thread_cache'#
 ** Connecting conn1 using username 'root' **
 ** Connecting conn2 using username 'root' **
 ** Connecting conn3 using username 'root' **
 ** Connecting conn4 using username 'root' **
-Saving threads cached, threads created values
-Threads Created Difference
-4
-4 Expected
+** Connection default **
 SHOW STATUS LIKE 'Threads_cached';
 Variable_name	Value
 Threads_cached	0
 0 Expected
-** Connection default **
 ** Disconnecting conn1,conn2,conn3,conn4 **
-'#new  values for thread cache after disconnecting'#
-Saving threads cached, threads created values
-Threads Created Difference
-0
-0 Expected
 SHOW STATUS LIKE 'Threads_cached';
 Variable_name	Value
 Threads_cached	3
 3 Expected
-SET @@GLOBAL.thread_cache_size=1;
-Saving threads cached, threads created values
-Threads Created Difference
-0
-0 Expected
-SHOW STATUS LIKE 'Threads_cached';
-Variable_name	Value
-Threads_cached	3
-1 Expected
-Bug: The number of threads cached should have decreased with cache size decrease.
+SET @@GLOBAL.thread_cache_size= 1;
 ** Connecting conn1 using username 'root' **
 ** Connecting conn2 using username 'root' **
-Saving threads cached, threads created values
-Threads Created Difference
-0
-1 Expected
-Bug: The number of threads created should have increased because the cache should have 1 thread only
-SHOW STATUS LIKE 'Threads_cached';
-Variable_name	Value
-Threads_cached	1
-0 Expected
-Bug: The number of threads created should have decreased because atleast 1 new connection came in
-** Connection default **
+connection default;
 ** Disconnecting conn1,conn2 **
-'#new status values for thread cache'#
-Saving threads cached, threads created values
-Threads Created Difference
-0
-0 Expected
 SHOW STATUS LIKE 'Threads_cached';
 Variable_name	Value
 Threads_cached	1
 1 Expected
-Saving threads cached, threads created values
 SET @@GLOBAL.thread_cache_size = @global_thread_cache_size;

mysql-test/r/variables.result

@@ -158,7 +158,7 @@ explain extended select @@IDENTITY,last_insert_id(), @@identity;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
 1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	No tables used
 Warnings:
-Note	1003	select 345 AS `@@IDENTITY`,last_insert_id() AS `last_insert_id()`,345 AS `@@identity`
+Note	1003	select @@IDENTITY AS `@@IDENTITY`,last_insert_id() AS `last_insert_id()`,@@identity AS `@@identity`
 set big_tables=OFF, big_tables=ON, big_tables=0, big_tables=1, big_tables="OFF", big_tables="ON";
 set global concurrent_insert=2;
 show variables like 'concurrent_insert';

mysql-test/r/view.result

@@ -3672,6 +3672,8 @@ DROP VIEW v1;
 
 # -- End of test case for Bug#35193.
 
+CREATE VIEW v1 AS SELECT 1;
+DROP VIEW v1;
 # -----------------------------------------------------------------
 # -- End of 5.0 tests.
 # -----------------------------------------------------------------

mysql-test/r/windows.result

@@ -9,8 +9,8 @@ drop table nu;
 drop table if exists t1;
 CREATE TABLE t1 ( `ID` int(6) ) data directory 'c:/tmp/' index directory 'c:/tmp/' engine=MyISAM;
 Warnings:
-Warning	0	DATA DIRECTORY option ignored
-Warning	0	INDEX DIRECTORY option ignored
+Warning	1618	<DATA DIRECTORY> option ignored
+Warning	1618	<INDEX DIRECTORY> option ignored
 drop table t1;
 CREATE TABLE t1 (a int, b int);
 INSERT INTO t1 VALUES (1,1);
@@ -18,6 +18,7 @@ EXPLAIN SELECT * FROM t1 WHERE b =  (SELECT max(2));
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 1	PRIMARY	NULL	NULL	NULL	NULL	NULL	NULL	NULL	Impossible WHERE noticed after reading const tables
 2	SUBQUERY	NULL	NULL	NULL	NULL	NULL	NULL	NULL	No tables used
+DROP TABLE t1;
 End of 5.0 tests.
 drop procedure if exists proc_1;
 create procedure proc_1() install plugin my_plug soname '\\root\\some_plugin.dll';

mysql-test/r/xa.result

@@ -55,3 +55,23 @@ select * from t1;
 a
 20
 drop table t1;
+drop table if exists t1;
+create table t1(a int, b int, c varchar(20), primary key(a)) engine = innodb;
+insert into t1 values(1, 1, 'a');
+insert into t1 values(2, 2, 'b');
+xa start 'a','b';
+update t1 set c = 'aa' where a = 1;
+xa start 'a','c';
+update t1 set c = 'bb' where a = 2;
+update t1 set c = 'bb' where a = 2;
+update t1 set c = 'aa' where a = 1;
+ERROR 40001: Deadlock found when trying to get lock; try restarting transaction
+select count(*) from t1;
+count(*)
+2
+xa end 'a','c';
+ERROR XA102: XA_RBDEADLOCK: Transaction branch was rolled back: deadlock was detected
+xa rollback 'a','c';
+xa start 'a','c';
+drop table t1;
+End of 5.0 tests

mysql-test/suite/funcs_1/r/is_columns_is.result

@@ -67,7 +67,7 @@ NULL	information_schema	EVENTS	LAST_ALTERED	18	0000-00-00 00:00:00	NO	datetime	N
 NULL	information_schema	EVENTS	LAST_EXECUTED	19	NULL	YES	datetime	NULL	NULL	NULL	NULL	NULL	NULL	datetime			select	
 NULL	information_schema	EVENTS	ON_COMPLETION	16		NO	varchar	12	36	NULL	NULL	utf8	utf8_general_ci	varchar(12)			select	
 NULL	information_schema	EVENTS	ORIGINATOR	21	0	NO	bigint	NULL	NULL	19	0	NULL	NULL	bigint(10)			select	
-NULL	information_schema	EVENTS	SQL_MODE	12	NULL	NO	longtext	4294967295	4294967295	NULL	NULL	utf8	utf8_general_ci	longtext			select	
+NULL	information_schema	EVENTS	SQL_MODE	12		NO	varchar	8192	24576	NULL	NULL	utf8	utf8_general_ci	varchar(8192)			select	
 NULL	information_schema	EVENTS	STARTS	13	NULL	YES	datetime	NULL	NULL	NULL	NULL	NULL	NULL	datetime			select	
 NULL	information_schema	EVENTS	STATUS	15		NO	varchar	18	54	NULL	NULL	utf8	utf8_general_ci	varchar(18)			select	
 NULL	information_schema	EVENTS	TIME_ZONE	5		NO	varchar	64	192	NULL	NULL	utf8	utf8_general_ci	varchar(64)			select	
@@ -277,12 +277,12 @@ NULL	information_schema	TRIGGERS	CHARACTER_SET_CLIENT	20		NO	varchar	32	96	NULL
 NULL	information_schema	TRIGGERS	COLLATION_CONNECTION	21		NO	varchar	32	96	NULL	NULL	utf8	utf8_general_ci	varchar(32)			select	
 NULL	information_schema	TRIGGERS	CREATED	17	NULL	YES	datetime	NULL	NULL	NULL	NULL	NULL	NULL	datetime			select	
 NULL	information_schema	TRIGGERS	DATABASE_COLLATION	22		NO	varchar	32	96	NULL	NULL	utf8	utf8_general_ci	varchar(32)			select	
-NULL	information_schema	TRIGGERS	DEFINER	19	NULL	NO	longtext	4294967295	4294967295	NULL	NULL	utf8	utf8_general_ci	longtext			select	
+NULL	information_schema	TRIGGERS	DEFINER	19		NO	varchar	77	231	NULL	NULL	utf8	utf8_general_ci	varchar(77)			select	
 NULL	information_schema	TRIGGERS	EVENT_MANIPULATION	4		NO	varchar	6	18	NULL	NULL	utf8	utf8_general_ci	varchar(6)			select	
 NULL	information_schema	TRIGGERS	EVENT_OBJECT_CATALOG	5	NULL	YES	varchar	512	1536	NULL	NULL	utf8	utf8_general_ci	varchar(512)			select	
 NULL	information_schema	TRIGGERS	EVENT_OBJECT_SCHEMA	6		NO	varchar	64	192	NULL	NULL	utf8	utf8_general_ci	varchar(64)			select	
 NULL	information_schema	TRIGGERS	EVENT_OBJECT_TABLE	7		NO	varchar	64	192	NULL	NULL	utf8	utf8_general_ci	varchar(64)			select	
-NULL	information_schema	TRIGGERS	SQL_MODE	18	NULL	NO	longtext	4294967295	4294967295	NULL	NULL	utf8	utf8_general_ci	longtext			select	
+NULL	information_schema	TRIGGERS	SQL_MODE	18		NO	varchar	8192	24576	NULL	NULL	utf8	utf8_general_ci	varchar(8192)			select	
 NULL	information_schema	TRIGGERS	TRIGGER_CATALOG	1	NULL	YES	varchar	512	1536	NULL	NULL	utf8	utf8_general_ci	varchar(512)			select	
 NULL	information_schema	TRIGGERS	TRIGGER_NAME	3		NO	varchar	64	192	NULL	NULL	utf8	utf8_general_ci	varchar(64)			select	
 NULL	information_schema	TRIGGERS	TRIGGER_SCHEMA	2		NO	varchar	64	192	NULL	NULL	utf8	utf8_general_ci	varchar(64)			select	
@@ -412,7 +412,7 @@ NULL	information_schema	COLUMNS	NUMERIC_SCALE	bigint	NULL	NULL	NULL	NULL	bigint(
 NULL	information_schema	EVENTS	EXECUTE_AT	datetime	NULL	NULL	NULL	NULL	datetime
 3.0000	information_schema	EVENTS	INTERVAL_VALUE	varchar	256	768	utf8	utf8_general_ci	varchar(256)
 3.0000	information_schema	EVENTS	INTERVAL_FIELD	varchar	18	54	utf8	utf8_general_ci	varchar(18)
-1.0000	information_schema	EVENTS	SQL_MODE	longtext	4294967295	4294967295	utf8	utf8_general_ci	longtext
+3.0000	information_schema	EVENTS	SQL_MODE	varchar	8192	24576	utf8	utf8_general_ci	varchar(8192)
 NULL	information_schema	EVENTS	STARTS	datetime	NULL	NULL	NULL	NULL	datetime
 NULL	information_schema	EVENTS	ENDS	datetime	NULL	NULL	NULL	NULL	datetime
 3.0000	information_schema	EVENTS	STATUS	varchar	18	54	utf8	utf8_general_ci	varchar(18)
@@ -635,8 +635,8 @@ NULL	information_schema	TRIGGERS	ACTION_ORDER	bigint	NULL	NULL	NULL	NULL	bigint(
 3.0000	information_schema	TRIGGERS	ACTION_REFERENCE_OLD_ROW	varchar	3	9	utf8	utf8_general_ci	varchar(3)
 3.0000	information_schema	TRIGGERS	ACTION_REFERENCE_NEW_ROW	varchar	3	9	utf8	utf8_general_ci	varchar(3)
 NULL	information_schema	TRIGGERS	CREATED	datetime	NULL	NULL	NULL	NULL	datetime
-1.0000	information_schema	TRIGGERS	SQL_MODE	longtext	4294967295	4294967295	utf8	utf8_general_ci	longtext
-1.0000	information_schema	TRIGGERS	DEFINER	longtext	4294967295	4294967295	utf8	utf8_general_ci	longtext
+3.0000	information_schema	TRIGGERS	SQL_MODE	varchar	8192	24576	utf8	utf8_general_ci	varchar(8192)
+3.0000	information_schema	TRIGGERS	DEFINER	varchar	77	231	utf8	utf8_general_ci	varchar(77)
 3.0000	information_schema	TRIGGERS	CHARACTER_SET_CLIENT	varchar	32	96	utf8	utf8_general_ci	varchar(32)
 3.0000	information_schema	TRIGGERS	COLLATION_CONNECTION	varchar	32	96	utf8	utf8_general_ci	varchar(32)
 3.0000	information_schema	TRIGGERS	DATABASE_COLLATION	varchar	32	96	utf8	utf8_general_ci	varchar(32)

mysql-test/suite/funcs_1/r/is_events.result

@@ -39,7 +39,7 @@ EVENT_TYPE	varchar(9)	NO
 EXECUTE_AT	datetime	YES		NULL	
 INTERVAL_VALUE	varchar(256)	YES		NULL	
 INTERVAL_FIELD	varchar(18)	YES		NULL	
-SQL_MODE	longtext	NO		NULL	
+SQL_MODE	varchar(8192)	NO			
 STARTS	datetime	YES		NULL	
 ENDS	datetime	YES		NULL	
 STATUS	varchar(18)	NO			
@@ -66,7 +66,7 @@ EVENTS	CREATE TEMPORARY TABLE `EVENTS` (
   `EXECUTE_AT` datetime DEFAULT NULL,
   `INTERVAL_VALUE` varchar(256) DEFAULT NULL,
   `INTERVAL_FIELD` varchar(18) DEFAULT NULL,
-  `SQL_MODE` longtext NOT NULL,
+  `SQL_MODE` varchar(8192) NOT NULL DEFAULT '',
   `STARTS` datetime DEFAULT NULL,
   `ENDS` datetime DEFAULT NULL,
   `STATUS` varchar(18) NOT NULL DEFAULT '',
@@ -93,7 +93,7 @@ EVENT_TYPE	varchar(9)	NO
 EXECUTE_AT	datetime	YES		NULL	
 INTERVAL_VALUE	varchar(256)	YES		NULL	
 INTERVAL_FIELD	varchar(18)	YES		NULL	
-SQL_MODE	longtext	NO		NULL	
+SQL_MODE	varchar(8192)	NO			
 STARTS	datetime	YES		NULL	
 ENDS	datetime	YES		NULL	
 STATUS	varchar(18)	NO			

mysql-test/suite/funcs_1/r/is_triggers.result

@@ -45,8 +45,8 @@ ACTION_REFERENCE_NEW_TABLE	varchar(64)	YES		NULL
 ACTION_REFERENCE_OLD_ROW	varchar(3)	NO			
 ACTION_REFERENCE_NEW_ROW	varchar(3)	NO			
 CREATED	datetime	YES		NULL	
-SQL_MODE	longtext	NO		NULL	
-DEFINER	longtext	NO		NULL	
+SQL_MODE	varchar(8192)	NO			
+DEFINER	varchar(77)	NO			
 CHARACTER_SET_CLIENT	varchar(32)	NO			
 COLLATION_CONNECTION	varchar(32)	NO			
 DATABASE_COLLATION	varchar(32)	NO			
@@ -70,8 +70,8 @@ TRIGGERS	CREATE TEMPORARY TABLE `TRIGGERS` (
   `ACTION_REFERENCE_OLD_ROW` varchar(3) NOT NULL DEFAULT '',
   `ACTION_REFERENCE_NEW_ROW` varchar(3) NOT NULL DEFAULT '',
   `CREATED` datetime DEFAULT NULL,
-  `SQL_MODE` longtext NOT NULL,
-  `DEFINER` longtext NOT NULL,
+  `SQL_MODE` varchar(8192) NOT NULL DEFAULT '',
+  `DEFINER` varchar(77) NOT NULL DEFAULT '',
   `CHARACTER_SET_CLIENT` varchar(32) NOT NULL DEFAULT '',
   `COLLATION_CONNECTION` varchar(32) NOT NULL DEFAULT '',
   `DATABASE_COLLATION` varchar(32) NOT NULL DEFAULT ''
@@ -95,8 +95,8 @@ ACTION_REFERENCE_NEW_TABLE	varchar(64)	YES		NULL
 ACTION_REFERENCE_OLD_ROW	varchar(3)	NO			
 ACTION_REFERENCE_NEW_ROW	varchar(3)	NO			
 CREATED	datetime	YES		NULL	
-SQL_MODE	longtext	NO		NULL	
-DEFINER	longtext	NO		NULL	
+SQL_MODE	varchar(8192)	NO			
+DEFINER	varchar(77)	NO			
 CHARACTER_SET_CLIENT	varchar(32)	NO			
 COLLATION_CONNECTION	varchar(32)	NO			
 DATABASE_COLLATION	varchar(32)	NO			

mysql-test/suite/funcs_1/t/ndb_trig_0102.test.moved

-#### suite/funcs_1/t/ndb_triggers.test
-
-# ndb tables should be used
-#
-# 1. Check if ndb is available
---source include/have_ndb.inc
-# 2. Set $engine_type
-let $engine_type= ndb;
-
-# Create some objects needed in many testcases
-USE test;
---source suite/funcs_1/include/ndb_tb3.inc
-
---source suite/funcs_1/triggers/triggers_0102.inc
-DROP TABLE test.tb3;
-

mysql-test/suite/funcs_1/t/ndb_trig_03.test.moved

-#### suite/funcs_1/t/ndb_triggers.test
-
-# NDB tables should be used
-#
-# 1. Check if NDB is available
---source include/have_ndb.inc
-# 2. Set $engine_type
-let $engine_type= ndb;
-
-# Create some objects needed in many testcases
-USE test;
---source suite/funcs_1/include/ndb_tb3.inc
-
---source suite/funcs_1/triggers/triggers_03.inc
-DROP TABLE test.tb3;
-

mysql-test/suite/funcs_1/t/ndb_trig_0407.test.moved

-#### suite/funcs_1/t/ndb_triggers.test
-
-# ndb tables should be used
-#
-# 1. Check if ndb is available
---source include/have_ndb.inc
-# 2. Set $engine_type
-let $engine_type= ndb;
-
-# Create some objects needed in many testcases
-USE test;
---source suite/funcs_1/include/ndb_tb3.inc
-
---source suite/funcs_1/triggers/triggers_0407.inc
-DROP TABLE test.tb3;
-

mysql-test/suite/funcs_1/t/ndb_trig_08.test.moved

-#### suite/funcs_1/t/ndb_triggers.test
-
-# ndb tables should be used
-#
-# 1. Check if ndb is available
---source include/have_ndb.inc
-# 2. Set $engine_type
-let $engine_type= ndb;
-
-# Create some objects needed in many testcases
-USE test;
---source suite/funcs_1/include/ndb_tb3.inc
-
---source suite/funcs_1/triggers/triggers_08.inc
-DROP TABLE test.tb3;
-

mysql-test/suite/funcs_1/t/ndb_trig_09.test.moved

-#### suite/funcs_1/t/ndb_triggers.test
-
-# ndb tables should be used
-#
-# 1. Check if ndb is available
---source include/have_ndb.inc
-# 2. Set $engine_type
-let $engine_type= ndb;
-
-# Create some objects needed in many testcases
-USE test;
---source suite/funcs_1/include/ndb_tb3.inc
-
---source suite/funcs_1/triggers/triggers_09.inc
-DROP TABLE test.tb3;
-

mysql-test/suite/funcs_1/t/ndb_trig_1011ext.test.moved

-#### suite/funcs_1/t/ndb_triggers.test
-
-# ndb tables should be used
-#
-# 1. Check if ndb is available
---source include/have_ndb.inc
-# 2. Set $engine_type
-let $engine_type= ndb;
-
-# Create some objects needed in many testcases
-USE test;
---source suite/funcs_1/include/ndb_tb3.inc
-
---source suite/funcs_1/triggers/triggers_1011ext.inc
-DROP TABLE test.tb3;
-

mysql-test/suite/ndb/r/ndb_partition_key.result

@@ -97,7 +97,8 @@ t1	CREATE TABLE `t1` (
   `c` int(11) NOT NULL DEFAULT '0',
   `d` int(11) DEFAULT NULL,
   PRIMARY KEY (`a`,`b`,`c`) USING HASH
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (b)  */
+) ENGINE=ndbcluster DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (b) */
 DROP TABLE t1;
 CREATE TABLE t1 (a int not null primary key)
 PARTITION BY KEY(a)
@@ -122,19 +123,28 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a) (PARTITION p0 ENGINE = ndbcluster, PARTITION p1 ENGINE = ndbcluster) */
+) ENGINE=ndbcluster DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a)
+(PARTITION p0 ENGINE = ndbcluster,
+ PARTITION p1 ENGINE = ndbcluster) */
 alter table t1 engine=heap;
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=MEMORY DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a) (PARTITION p0 ENGINE = MEMORY, PARTITION p1 ENGINE = MEMORY) */
+) ENGINE=MEMORY DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a)
+(PARTITION p0 ENGINE = MEMORY,
+ PARTITION p1 ENGINE = MEMORY) */
 alter table t1 engine=ndb;
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a) (PARTITION p0 ENGINE = ndbcluster, PARTITION p1 ENGINE = ndbcluster) */
+) ENGINE=ndbcluster DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a)
+(PARTITION p0 ENGINE = ndbcluster,
+ PARTITION p1 ENGINE = ndbcluster) */
 alter table t1 engine=heap remove partitioning;
 show create table t1;
 Table	Create Table
@@ -148,7 +158,10 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a) (PARTITION p0 ENGINE = ndbcluster, PARTITION p1 ENGINE = ndbcluster) */
+) ENGINE=ndbcluster DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a)
+(PARTITION p0 ENGINE = ndbcluster,
+ PARTITION p1 ENGINE = ndbcluster) */
 alter table t1
 partition by key (a)
 (partition p0 engine=ndb, partition p1 engine=ndb);
@@ -156,7 +169,10 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a) (PARTITION p0 ENGINE = ndbcluster, PARTITION p1 ENGINE = ndbcluster) */
+) ENGINE=ndbcluster DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a)
+(PARTITION p0 ENGINE = ndbcluster,
+ PARTITION p1 ENGINE = ndbcluster) */
 alter table t1 remove partitioning;
 show create table t1;
 Table	Create Table
@@ -174,7 +190,10 @@ show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
   `a` int(11) DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 /*!50100 PARTITION BY KEY (a) (PARTITION p0 ENGINE = ndbcluster, PARTITION p1 ENGINE = ndbcluster) */
+) ENGINE=ndbcluster DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY KEY (a)
+(PARTITION p0 ENGINE = ndbcluster,
+ PARTITION p1 ENGINE = ndbcluster) */
 drop table t1;
 CREATE TABLE t1 (
 c1 MEDIUMINT NOT NULL AUTO_INCREMENT,

mysql-test/suite/ndb/r/ndb_partition_range.result

@@ -123,7 +123,11 @@ t1	CREATE TABLE `t1` (
   `c` int(11) NOT NULL,
   PRIMARY KEY (`b`),
   UNIQUE KEY `a` (`a`)
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE (b) (PARTITION x1 VALUES LESS THAN (5) ENGINE = ndbcluster, PARTITION x2 VALUES LESS THAN (10) ENGINE = ndbcluster, PARTITION x3 VALUES LESS THAN (20) ENGINE = ndbcluster) */
+) ENGINE=ndbcluster DEFAULT CHARSET=latin1
+/*!50100 PARTITION BY RANGE (b)
+(PARTITION x1 VALUES LESS THAN (5) ENGINE = ndbcluster,
+ PARTITION x2 VALUES LESS THAN (10) ENGINE = ndbcluster,
+ PARTITION x3 VALUES LESS THAN (20) ENGINE = ndbcluster) */
 drop table t1;
 CREATE TABLE t1
 (id MEDIUMINT NOT NULL,