Skip to content

M
MariaDB
Commit f2a7af7b authored by Mats Kindahl's avatar Mats Kindahl
Browse files
Options

Merging with 5.1-5.1.29-rc.

parents 690fd28a 45a78d00
Expand all Show whitespace changes
Inline Side-by-side
Showing with 145539 additions and 18940 deletions
BUILD/compile-solaris-amd64-forte 100644 → 100755
View file @ f2a7af7b
......@@ -7,22 +7,23 @@ path=`dirname $0`
. "$path/autorun.sh"
# For "optimal" code for this computer add -fast to EXTRA
# To compile 64 bit, add -xarch=v9 to EXTRA_64_BIT
# To compile 64 bit, add -m64 to EXTRA_64_BIT
EXTRA_64_BIT="-xarch=amd64"
EXTRA_64_BIT="-m64"
EXTRA="-fast"
#
# The following should not need to be touched
#
export CC CXX CFLAGS CXXFLAGS
export CC CXX CFLAGS CXXFLAGS LIBS
STD="-g -mt -D_FORTEC_ $EXTRA $EXTRA_64_BIT"
ASFLAGS="$EXTRA_64_BIT"
CC=cc-5.0
CFLAGS="-Xa -xstrconst $STD"
CXX=CC
CXXFLAGS="-noex $STD"
LIBS=-lmtmalloc
./configure \
--prefix=/usr/local/mysql \
--localstatedir=/usr/local/mysql/data \
......
BUILD/compile-solaris-amd64-forte-debug
View file @ f2a7af7b
......@@ -6,8 +6,8 @@ gmake -k clean || true
path=`dirname $0`
. "$path/autorun.sh"
# To compile 64 bit, add -xarch=amd64 to EXTRA_64_BIT
EXTRA_64_BIT="-xarch=amd64"
# To compile 64 bit, add -m64 to EXTRA_64_BIT
EXTRA_64_BIT="-m64"
# For "optimal" code for this computer add -fast to EXTRA. Note that
# this causes problem with debugging the program since -fast implies
......
BUILD/compile-solaris-sparc
View file @ f2a7af7b
......@@ -9,6 +9,6 @@ PATH=$PATH:/usr/ccs/bin:/usr/local/bin
path=`dirname $0`
. "$path/autorun.sh"
CFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Wunused -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa" CXX=gcc CXXFLAGS="-Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa -g" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client
CFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Wunused -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa" CXX=gcc CXXFLAGS="-Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa -g" LIBS="-lmtmalloc" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client
make -j 4
BUILD/compile-solaris-sparc-forte
View file @ f2a7af7b
......@@ -29,7 +29,7 @@ EXTRA="-fast" # Remove comment to target current machine
STD="-mt -D_FORTEC_ $EXTRA $EXTRA_64_BIT"
CC=cc-5.0 CFLAGS="-Xa -xstrconst $STD" \
CXX=CC CXXFLAGS="-noex $STD" \
CXX=CC CXXFLAGS="-noex $STD" LIBS="-lmtmalloc" \
./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --prefix=$PREFIX
make -j 4
......
CMakeLists.txt
View file @ f2a7af7b
......@@ -108,18 +108,18 @@ SET(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} -DDBUG_OFF")
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /wd4800 /wd4805")
SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /wd4800 /wd4805")
IF(CMAKE_GENERATOR MATCHES "Visual Studio 8")
# Disable warnings in Visual Studio 8 and above
IF(MSVC AND NOT CMAKE_GENERATOR MATCHES "Visual Studio 7")
SET(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /wd4996")
SET(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /wd4996")
SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} /wd4996")
SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /wd4996")
SET(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /wd4996")
SET(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} /wd4996")
ENDIF(CMAKE_GENERATOR MATCHES "Visual Studio 8")
IF(CMAKE_GENERATOR MATCHES "Visual Studio 7" OR
CMAKE_GENERATOR MATCHES "Visual Studio 8")
ENDIF(MSVC AND NOT CMAKE_GENERATOR MATCHES "Visual Studio 7")
# Settings for Visual Studio 7 and above.
IF(MSVC)
# replace /MDd with /MTd
STRING(REPLACE "/MD" "/MT" CMAKE_C_FLAGS_RELEASE ${CMAKE_C_FLAGS_RELEASE})
STRING(REPLACE "/MD" "/MT" CMAKE_C_FLAGS_RELWITHDEBINFO ${CMAKE_C_FLAGS_RELWITHDEBINFO})
......@@ -149,9 +149,7 @@ IF(CMAKE_GENERATOR MATCHES "Visual Studio 7" OR
IF(NOT tmp_manifest)
SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /MANIFEST:NO")
ENDIF(NOT tmp_manifest)
ENDIF(CMAKE_GENERATOR MATCHES "Visual Studio 7" OR
CMAKE_GENERATOR MATCHES "Visual Studio 8")
ENDIF(MSVC)
IF(WIN32)
ADD_DEFINITIONS("-D_WINDOWS -D__WIN__ -D_CRT_SECURE_NO_DEPRECATE")
......
client/mysqldump.c
View file @ f2a7af7b
......@@ -2396,8 +2396,15 @@ static uint get_table_structure(char *table, char *db, char *table_type,
fprintf(sql_file, ",\n %s %s",
quote_name(row[0], name_buff, 0), row[1]);
}
/*
Stand-in tables are always MyISAM tables as the default
engine might have a column-limit that's lower than the
number of columns in the view, and MyISAM support is
guaranteed to be in the server anyway.
*/
fprintf(sql_file,
"\n) */;\n"
"\n) ENGINE=MyISAM */;\n"
"SET character_set_client = @saved_cs_client;\n");
check_io(sql_file);
......
configure.in
View file @ f2a7af7b
......@@ -10,7 +10,7 @@ AC_CANONICAL_SYSTEM
#
# When changing major version number please also check switch statement
# in mysqlbinlog::check_master_version().
AM_INIT_AUTOMAKE(mysql, 5.1.29)
AM_INIT_AUTOMAKE(mysql, 5.1.30)
AM_CONFIG_HEADER([include/config.h:config.h.in])
PROTOCOL_VERSION=10
......@@ -2714,6 +2714,9 @@ then
sql_server="vio sql"
fi
# "innochecksum" is not in the "innobase/" subdirectory, but should be switched
AM_CONDITIONAL([BUILD_INNODB_TOOLS], [test X"$with_plugin_innobase" = Xyes])
# IMPORTANT - do not modify LIBS past this line - this hack is the only way
# I know to add the static NSS magic if we have static NSS libraries with
# glibc - Sasha
......
extra/Makefile.am
View file @ f2a7af7b
......@@ -43,7 +43,12 @@ $(top_builddir)/include/mysqld_ername.h: $(top_builddir)/include/mysqld_error.h
$(top_builddir)/include/sql_state.h: $(top_builddir)/include/mysqld_error.h
bin_PROGRAMS = replace perror resolveip my_print_defaults \
resolve_stack_dump mysql_waitpid innochecksum
resolve_stack_dump mysql_waitpid
# "innochecksum" should be switched
if BUILD_INNODB_TOOLS
bin_PROGRAMS += innochecksum
endif
noinst_PROGRAMS = charset2html
EXTRA_PROGRAMS = comp_err
EXTRA_DIST = CMakeLists.txt
......
extra/yassl/Makefile.am
View file @ f2a7af7b
SUBDIRS = taocrypt src testsuite
EXTRA_DIST = yassl.dsp yassl.dsw yassl.vcproj \
CMakeLists.txt
EXTRA_DIST = CMakeLists.txt
# Don't update the files from bitkeeper
%::SCCS/s.%
extra/yassl/taocrypt/Makefile.am
View file @ f2a7af7b
SUBDIRS = src test benchmark
EXTRA_DIST = taocrypt.dsw taocrypt.dsp taocrypt.vcproj CMakeLists.txt $(wildcard mySTL/*.hpp)
EXTRA_DIST = CMakeLists.txt $(wildcard mySTL/*.hpp)
# Don't update the files from bitkeeper
%::SCCS/s.%
extra/yassl/taocrypt/taocrypt.vcproj deleted 100755 → 0
View file @ 690fd28a
<?xml version="1.0" encoding="Windows-1252"?>
<VisualStudioProject
ProjectType="Visual C++"
Version="7.10"
Name="taocrypt"
SccProjectName=""
SccLocalPath="">
<Platforms>
<Platform
Name="Win32"/>
</Platforms>
<Configurations>
<Configuration
Name="Debug|Win32"
OutputDirectory=".\debug_obj"
IntermediateDirectory=".\debug_obj"
ConfigurationType="4"
UseOfMFC="0"
ATLMinimizesCRunTimeLibraryUsage="FALSE"
CharacterSet="2">
<Tool
Name="VCCLCompilerTool"
Optimization="0"
OptimizeForProcessor="2"
AdditionalIncludeDirectories="include,mySTL"
PreprocessorDefinitions="WIN32;_DEBUG;_LIB"
ExceptionHandling="FALSE"
BasicRuntimeChecks="3"
RuntimeLibrary="1"
UsePrecompiledHeader="2"
PrecompiledHeaderFile=".\debug_obj/taocrypt.pch"
AssemblerListingLocation=".\debug_obj/"
ObjectFile=".\debug_obj/"
ProgramDataBaseFileName=".\debug_obj/"
BrowseInformation="1"
WarningLevel="3"
SuppressStartupBanner="TRUE"
DebugInformationFormat="4"
CompileAs="0"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile=".\debug_obj\taocrypt.lib"
SuppressStartupBanner="TRUE"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="_DEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="Release|Win32"
OutputDirectory=".\release_obj"
IntermediateDirectory=".\release_obj"
ConfigurationType="4"
UseOfMFC="0"
ATLMinimizesCRunTimeLibraryUsage="FALSE"
CharacterSet="2">
<Tool
Name="VCCLCompilerTool"
Optimization="2"
InlineFunctionExpansion="1"
OptimizeForProcessor="2"
AdditionalIncludeDirectories="include,mySTL"
PreprocessorDefinitions="WIN32;NDEBUG;_LIB"
StringPooling="TRUE"
ExceptionHandling="FALSE"
RuntimeLibrary="0"
EnableFunctionLevelLinking="TRUE"
UsePrecompiledHeader="2"
PrecompiledHeaderFile=".\release_obj/taocrypt.pch"
AssemblerListingLocation=".\release_obj/"
ObjectFile=".\release_obj/"
ProgramDataBaseFileName=".\release_obj/"
WarningLevel="3"
SuppressStartupBanner="TRUE"
CompileAs="0"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile=".\release_obj\taocrypt.lib"
SuppressStartupBanner="TRUE"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="NDEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
</Configurations>
<References>
</References>
<Files>
<Filter
Name="Source Files"
Filter="cpp;c;cxx;rc;def;r;odl;idl;hpj;bat">
<File
RelativePath="src\aes.cpp">
</File>
<File
RelativePath="src\aestables.cpp">
</File>
<File
RelativePath="src\algebra.cpp">
</File>
<File
RelativePath="src\arc4.cpp">
</File>
<File
RelativePath="src\asn.cpp">
</File>
<File
RelativePath="src\coding.cpp">
</File>
<File
RelativePath="src\des.cpp">
</File>
<File
RelativePath="src\dh.cpp">
</File>
<File
RelativePath="src\dsa.cpp">
</File>
<File
RelativePath="src\file.cpp">
</File>
<File
RelativePath="src\hash.cpp">
</File>
<File
RelativePath="src\integer.cpp">
</File>
<File
RelativePath="src\md2.cpp">
</File>
<File
RelativePath="src\md4.cpp">
</File>
<File
RelativePath="src\md5.cpp">
</File>
<File
RelativePath="src\misc.cpp">
</File>
<File
RelativePath="src\random.cpp">
</File>
<File
RelativePath="src\ripemd.cpp">
</File>
<File
RelativePath="src\rsa.cpp">
</File>
<File
RelativePath="src\sha.cpp">
</File>
</Filter>
<Filter
Name="Header Files"
Filter="h;hpp;hxx;hm;inl">
<File
RelativePath="include\aes.hpp">
</File>
<File
RelativePath="include\algebra.hpp">
</File>
<File
RelativePath="include\arc4.hpp">
</File>
<File
RelativePath="include\asn.hpp">
</File>
<File
RelativePath="include\block.hpp">
</File>
<File
RelativePath="include\coding.hpp">
</File>
<File
RelativePath="include\des.hpp">
</File>
<File
RelativePath="include\dh.hpp">
</File>
<File
RelativePath="include\dsa.hpp">
</File>
<File
RelativePath="include\error.hpp">
</File>
<File
RelativePath="include\file.hpp">
</File>
<File
RelativePath="include\hash.hpp">
</File>
<File
RelativePath="include\hmac.hpp">
</File>
<File
RelativePath="include\integer.hpp">
</File>
<File
RelativePath="include\md2.hpp">
</File>
<File
RelativePath="include\md4.hpp">
</File>
<File
RelativePath="include\md5.hpp">
</File>
<File
RelativePath="include\misc.hpp">
</File>
<File
RelativePath="include\modarith.hpp">
</File>
<File
RelativePath="include\modes.hpp">
</File>
<File
RelativePath="include\random.hpp">
</File>
<File
RelativePath="include\ripemd.hpp">
</File>
<File
RelativePath="include\rsa.hpp">
</File>
<File
RelativePath="include\sha.hpp">
</File>
</Filter>
</Files>
<Globals>
</Globals>
</VisualStudioProject>
extra/yassl/yassl.vcproj deleted 100755 → 0
View file @ 690fd28a
<?xml version="1.0" encoding="Windows-1252"?>
<VisualStudioProject
ProjectType="Visual C++"
Version="7.10"
Name="yassl"
SccProjectName=""
SccLocalPath="">
<Platforms>
<Platform
Name="Win32"/>
</Platforms>
<Configurations>
<Configuration
Name="Debug|Win32"
OutputDirectory=".\debug_obj"
IntermediateDirectory=".\debug_obj"
ConfigurationType="4"
UseOfMFC="0"
ATLMinimizesCRunTimeLibraryUsage="FALSE"
CharacterSet="2">
<Tool
Name="VCCLCompilerTool"
Optimization="0"
OptimizeForProcessor="2"
AdditionalIncludeDirectories="include,taocrypt\include,taocrypt\mySTL"
PreprocessorDefinitions="WIN32;_DEBUG;_LIB;YASSL_PREFIX"
ExceptionHandling="FALSE"
BasicRuntimeChecks="3"
RuntimeLibrary="1"
UsePrecompiledHeader="2"
PrecompiledHeaderFile=".\debug_obj/yassl.pch"
AssemblerListingLocation=".\debug_obj/"
ObjectFile=".\debug_obj/"
ProgramDataBaseFileName=".\debug_obj/"
BrowseInformation="1"
WarningLevel="3"
SuppressStartupBanner="TRUE"
DebugInformationFormat="4"
CompileAs="0"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile=".\debug_obj\yassl.lib"
SuppressStartupBanner="TRUE"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="_DEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="Release|Win32"
OutputDirectory=".\release_obj"
IntermediateDirectory=".\release_obj"
ConfigurationType="4"
UseOfMFC="0"
ATLMinimizesCRunTimeLibraryUsage="FALSE"
CharacterSet="2">
<Tool
Name="VCCLCompilerTool"
Optimization="2"
InlineFunctionExpansion="1"
OptimizeForProcessor="2"
AdditionalIncludeDirectories="include,taocrypt\include,taocrypt\mySTL"
PreprocessorDefinitions="WIN32;NDEBUG;_LIB;YASSL_PREFIX"
StringPooling="TRUE"
ExceptionHandling="FALSE"
RuntimeLibrary="0"
EnableFunctionLevelLinking="TRUE"
UsePrecompiledHeader="2"
PrecompiledHeaderFile=".\release_obj/yassl.pch"
AssemblerListingLocation=".\release_obj/"
ObjectFile=".\release_obj/"
ProgramDataBaseFileName=".\release_obj/"
WarningLevel="3"
SuppressStartupBanner="TRUE"
CompileAs="0"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile=".\release_obj\yassl.lib"
SuppressStartupBanner="TRUE"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="NDEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
</Configurations>
<References>
</References>
<Files>
<Filter
Name="Source Files"
Filter="cpp;c;cxx;rc;def;r;odl;idl;hpj;bat">
<File
RelativePath="src\buffer.cpp">
</File>
<File
RelativePath="src\cert_wrapper.cpp">
</File>
<File
RelativePath="src\crypto_wrapper.cpp">
</File>
<File
RelativePath="src\handshake.cpp">
</File>
<File
RelativePath="src\lock.cpp">
</File>
<File
RelativePath="src\log.cpp">
</File>
<File
RelativePath="src\socket_wrapper.cpp">
</File>
<File
RelativePath="src\ssl.cpp">
</File>
<File
RelativePath="src\timer.cpp">
</File>
<File
RelativePath="src\yassl_error.cpp">
</File>
<File
RelativePath="src\yassl_imp.cpp">
</File>
<File
RelativePath="src\yassl_int.cpp">
</File>
</Filter>
<Filter
Name="Header Files"
Filter="h;hpp;hxx;hm;inl">
<File
RelativePath="include\buffer.hpp">
</File>
<File
RelativePath="include\cert_wrapper.hpp">
</File>
<File
RelativePath="include\crypto_wrapper.hpp">
</File>
<File
RelativePath="include\factory.hpp">
</File>
<File
RelativePath="include\handshake.hpp">
</File>
<File
RelativePath="include\lock.hpp">
</File>
<File
RelativePath="include\log.hpp">
</File>
<File
RelativePath="include\socket_wrapper.hpp">
</File>
<File
RelativePath="include\timer.hpp">
</File>
<File
RelativePath="include\yassl_error.hpp">
</File>
<File
RelativePath="include\yassl_imp.hpp">
</File>
<File
RelativePath="include\yassl_int.hpp">
</File>
<File
RelativePath="include\yassl_types.hpp">
</File>
</Filter>
</Files>
<Globals>
</Globals>
</VisualStudioProject>
include/thr_lock.h
View file @ f2a7af7b
......@@ -29,6 +29,14 @@ extern ulong locks_immediate,locks_waited ;
enum thr_lock_type { TL_IGNORE=-1,
TL_UNLOCK, /* UNLOCK ANY LOCK */
/*
Parser only! At open_tables() becomes TL_READ or
TL_READ_NO_INSERT depending on the binary log format
(SBR/RBR) and on the table category (log table).
Used for tables that are read by statements which
modify tables.
*/
TL_READ_DEFAULT,
TL_READ, /* Read lock */
TL_READ_WITH_SHARED_LOCKS,
/* High prior. than TL_WRITE. Allow concurrent insert */
......
libmysql/dll.c
View file @ f2a7af7b
......@@ -89,9 +89,20 @@ BOOL APIENTRY LibMain(HANDLE hInst,DWORD ul_reason_being_called,
UNREFERENCED_PARAMETER(lpReserved);
} /* LibMain */
static BOOL do_libmain;
int __stdcall DllMain(HANDLE hInst,DWORD ul_reason_being_called,LPVOID lpReserved)
{
/*
Unless environment variable LIBMYSQL_DLLINIT is set, do nothing.
The environment variable is checked once, during the first call to DllMain()
(in DLL_PROCESS_ATTACH hook).
*/
if (ul_reason_being_called == DLL_PROCESS_ATTACH)
do_libmain = (getenv("LIBMYSQL_DLLINIT") != NULL);
if (do_libmain)
return LibMain(hInst,ul_reason_being_called,lpReserved);
return TRUE;
}
#elif defined(WINDOWS)
......
man/Makefile.am
View file @ f2a7af7b
......@@ -21,5 +21,9 @@ man1_MANS = @man1_files@
man8_MANS = @man8_files@
EXTRA_DIST = $(man1_MANS) $(man8_MANS)
# "make_win_*" are not needed in Unix binary packages,
install-data-hook:
rm -f $(DESTDIR)$(manlibdir)/man1/make_win_*
# Don't update the files from bitkeeper
%::SCCS/s.%
mysql-test/extra/binlog_tests/binlog.test
View file @ f2a7af7b
......@@ -125,6 +125,45 @@ drop table t1;
--replace_regex /\/\* xid=.* \*\//\/* XID *\// /table_id: [0-9]+/table_id: #/ /Server ver: [^,]*,/Server version,/
show binlog events from 0;
#
# Bug #39182: Binary log producing incompatible character set query from
# stored procedure.
#
reset master;
CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
USE bug39182;
CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
DELIMITER //;
CREATE PROCEDURE p1()
BEGIN
DECLARE s1 VARCHAR(255);
SET s1= "test";
CREATE TEMPORARY TABLE tmp1
SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
SELECT
COLLATION(NAME_CONST('s1', _utf8'test')) c1,
COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
COLLATION(s1) c3,
COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
COERCIBILITY(s1) d3;
DROP TEMPORARY TABLE tmp1;
END//
DELIMITER ;//
CALL p1();
source include/show_binlog_events.inc;
DROP PROCEDURE p1;
DROP TABLE t1;
DROP DATABASE bug39182;
USE test;
--echo End of 5.0 tests
# Test of a too big SET INSERT_ID: see if the truncated value goes
......
mysql-test/extra/binlog_tests/innodb_stat.test
View file @ f2a7af7b
......@@ -7,6 +7,7 @@
# Actually this test has nothing to do with innodb per se, it just requires
# transactional table.
#
flush status;
show status like "binlog_cache_use";
show status like "binlog_cache_disk_use";
--disable_warnings
......@@ -38,12 +39,3 @@ commit;
show status like "binlog_cache_use";
show status like "binlog_cache_disk_use";
drop table t1;
# Test for testable InnoDB status variables. This test
# uses previous ones(pages_created, rows_deleted, ...).
show status like "Innodb_buffer_pool_pages_total";
show status like "Innodb_page_size";
show status like "Innodb_rows_deleted";
show status like "Innodb_rows_inserted";
show status like "Innodb_rows_updated";
mysql-test/extra/rpl_tests/rpl_EE_err.test
View file @ f2a7af7b
......@@ -20,7 +20,7 @@
eval create table t1 (a int) engine=$engine_type;
flush tables;
system rm $MYSQLTEST_VARDIR/master-data/test/t1.MYI ;
remove_file $MYSQLTEST_VARDIR/master-data/test/t1.MYI ;
drop table if exists t1;
save_master_pos;
connection slave;
......
mysql-test/extra/rpl_tests/rpl_ddl.test
View file @ f2a7af7b
......@@ -151,6 +151,20 @@ DROP DATABASE IF EXISTS mysqltest3;
CREATE DATABASE mysqltest1;
CREATE DATABASE mysqltest2;
eval CREATE TABLE mysqltest1.t1 (f1 BIGINT) ENGINE=$engine_type;
# Prevent Bug#26687 rpl_ddl test fails if run with --innodb option
# The testscript (suite/rpl/rpl_ddl.test) + the expected result need that the
# slave uses MyISAM for the table mysqltest.t1.
# This is not valid in case of suite/rpl_ndb/rpl_ndb_ddl.test which sources
# also this script.
sync_slave_with_master;
connection slave;
if (`SELECT COUNT(*) FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_SCHEMA = 'mysqltest1' AND TABLE_NAME = 't1'
AND ENGINE <> 'MyISAM' AND '$engine_type' <> 'NDB'`)
{
skip This test needs on slave side: InnoDB disabled, default engine: MyISAM;
}
connection master;
INSERT INTO mysqltest1.t1 SET f1= 0;
eval CREATE TABLE mysqltest1.t2 (f1 BIGINT) ENGINE=$engine_type;
eval CREATE TABLE mysqltest1.t3 (f1 BIGINT) ENGINE=$engine_type;
......
mysql-test/extra/rpl_tests/rpl_log.test
View file @ f2a7af7b
......@@ -13,22 +13,15 @@ save_master_pos;
connection slave;
sync_with_master;
stop slave;
--source include/wait_for_slave_to_stop.inc
reset master;
reset slave;
# We are going to read the slave's binlog which contains file_id (for some LOAD
# DATA INFILE); to make it repeatable (not influenced by other tests), we need
# to stop and start the slave, to be sure file_id will start from 1.
# This can be done with 'server_stop slave', but
# this would require the manager, so most of the time the test will be skipped
# :(
# To workaround this, I (Guilhem) add a (empty) rpl_log-slave.opt (because when
# mysql-test-run finds such a file it restarts the slave before doing the
# test). That's not very elegant but I could find no better way, sorry.
start slave;
--source include/wait_for_slave_to_start.inc
let $VERSION=`select version()`;
connection master;
reset master;
eval create table t1(n int not null auto_increment primary key)ENGINE=$engine_type;
insert into t1 values (NULL);
drop table t1;
......@@ -79,7 +72,6 @@ connection slave;
# Note that the above 'slave start' will cause a 3rd rotate event (a fake one)
# to go into the relay log (the master always sends a fake one when replication
# starts).
start slave;
let $result_pattern= '%127.0.0.1%root%master-bin.000002%slave-relay-bin.000005%Yes%Yes%0%0%None%';
--source include/wait_slave_status.inc
sync_with_master;
......@@ -87,6 +79,7 @@ sync_with_master;
select * from t1 order by 1 asc;
flush logs;
stop slave;
--source include/wait_for_slave_to_stop.inc
connection master;
# Create some entries for second log
......@@ -95,6 +88,7 @@ eval create table t2 (n int)ENGINE=$engine_type;
insert into t2 values (1);
source include/show_binlog_events.inc;
--replace_result $VERSION VERSION
--replace_regex /file_id=[0-9]+/file_id=#/ /block_len=[0-9]+/block_len=#/ /infile '.+'/infile 'words.dat'/
--replace_column 2 # 5 #
--replace_regex /\/\* xid=.* \*\//\/* XID *\// /table_id: [0-9]+/table_id: #/
show binlog events in 'master-bin.000002';
......@@ -102,10 +96,12 @@ show binary logs;
save_master_pos;
connection slave;
start slave;
--source include/wait_for_slave_to_start.inc
sync_with_master;
show binary logs;
--replace_result $MASTER_MYPORT MASTER_PORT $VERSION VERSION
--replace_column 2 # 5 #
--replace_regex /file_id=[0-9]+/file_id=#/ /block_len=[0-9]+/block_len=#/ /INFILE '.+'/INFILE 'words.dat'/
--replace_regex /\/\* xid=.* \*\//\/* XID *\// /table_id: [0-9]+/table_id: #/
show binlog events in 'slave-bin.000001' from 4;
--replace_result $MASTER_MYPORT MASTER_PORT $VERSION VERSION
......
mysql-test/include/ndb_backup_print.inc
View file @ f2a7af7b
--exec $NDB_TOOLS_DIR/ndb_restore --no-defaults $ndb_restore_opts -b $the_backup_id -n 1 $NDB_BACKUP_DIR/BACKUP/BACKUP-$the_backup_id $ndb_restore_filter > $MYSQLTEST_VARDIR/tmp/tmp.dat
--exec $NDB_TOOLS_DIR/ndb_restore --no-defaults $ndb_restore_opts -b $the_backup_id -n 2 $NDB_BACKUP_DIR/BACKUP/BACKUP-$the_backup_id $ndb_restore_filter >> $MYSQLTEST_VARDIR/tmp/tmp.dat
--exec sort $MYSQLTEST_VARDIR/tmp/tmp.dat
--exec rm -f $MYSQLTEST_VARDIR/tmp/tmp.dat
--error 0,1
--remove_file $MYSQLTEST_VARDIR/tmp/tmp.dat
--let ndb_restore_opts=
--let ndb_restore_filter=
mysql-test/include/wait_for_slave_sql_error_and_skip.inc
View file @ f2a7af7b
......@@ -17,6 +17,9 @@ if ($show_sql_error)
echo Last_SQL_Error = $error;
}
# wait for SQL thread to stop after the error
source include/wait_for_slave_sql_to_stop.inc;
# skip the erroneous statement
set global sql_slave_skip_counter=1;
start slave;
......
mysql-test/lib/mtr_cases.pl
View file @ f2a7af7b
......@@ -433,41 +433,51 @@ sub optimize_cases {
# Skip processing if already marked as skipped
next if $tinfo->{skip};
# Replication test needs an adjustment of binlog format
if (mtr_match_prefix($tinfo->{'name'}, "rpl"))
{
# =======================================================
# Get binlog-format used by this test from master_opt
# If a special binlog format was selected with
# --mysqld=--binlog-format=x, skip all test that does not
# support it
# =======================================================
my $test_binlog_format;
foreach my $opt ( @{$tinfo->{master_opt}} ) {
$test_binlog_format= $test_binlog_format ||
mtr_match_prefix($opt, "--binlog-format=");
}
# print $tinfo->{name}." uses ".$test_binlog_format."\n";
#print "used_binlog_format: $::used_binlog_format\n";
if (defined $::used_binlog_format )
{
# =======================================================
# If a special binlog format was selected with
# --mysqld=--binlog-format=x, skip all test with different
# binlog-format
# Fixed --binlog-format=x specified on command line
# =======================================================
if (defined $::used_binlog_format and
$test_binlog_format and
$::used_binlog_format ne $test_binlog_format)
if ( defined $tinfo->{'binlog_formats'} )
{
#print "binlog_formats: ". join(", ", @{$tinfo->{binlog_formats}})."\n";
# The test supports different binlog formats
# check if the selected one is ok
my $supported=
grep { $_ eq $::used_binlog_format } @{$tinfo->{'binlog_formats'}};
if ( !$supported )
{
$tinfo->{'skip'}= 1;
$tinfo->{'comment'}= "Requires --binlog-format='$test_binlog_format'";
next;
$tinfo->{'comment'}=
"Doesn't support --binlog-format='$::used_binlog_format'";
}
}
}
else
{
# =======================================================
# Check that testcase supports the designated binlog-format
# Use dynamic switching of binlog format
# =======================================================
if ($test_binlog_format and defined $tinfo->{'sup_binlog_formats'} )
# Get binlog-format used by this test from master_opt
my $test_binlog_format;
foreach my $opt ( @{$tinfo->{master_opt}} ) {
$test_binlog_format=
mtr_match_prefix($opt, "--binlog-format=") || $test_binlog_format;
}
if (defined $test_binlog_format and
defined $tinfo->{binlog_formats} )
{
my $supported=
grep { $_ eq $test_binlog_format } @{$tinfo->{'sup_binlog_formats'}};
grep { $_ eq $test_binlog_format } @{$tinfo->{'binlog_formats'}};
if ( !$supported )
{
$tinfo->{'skip'}= 1;
......@@ -476,20 +486,8 @@ sub optimize_cases {
next;
}
}
# =======================================================
# Use dynamic switching of binlog-format if mtr started
# w/o --mysqld=--binlog-format=xxx and combinations.
# =======================================================
if (!defined $tinfo->{'combination'} and
!defined $::used_binlog_format)
{
$test_binlog_format= $tinfo->{'sup_binlog_formats'}->[0];
}
# Save binlog format for dynamic switching
$tinfo->{binlog_format}= $test_binlog_format;
}
}
}
......@@ -879,18 +877,19 @@ sub collect_one_test_case($$$$$$$$$) {
# the specified value in "tinfo"
our @tags=
(
["include/have_innodb.inc", "innodb_test", 1],
["include/have_binlog_format_row.inc", "sup_binlog_formats", ["row"]],
["include/have_log_bin.inc", "need_binlog", 1],
["include/have_binlog_format_statement.inc",
"sup_binlog_formats", ["statement"]],
["include/have_binlog_format_mixed.inc", "sup_binlog_formats", ["mixed"]],
["include/have_binlog_format_row.inc", "binlog_formats", ["row"]],
["include/have_binlog_format_statement.inc", "binlog_formats", ["statement"]],
["include/have_binlog_format_mixed.inc", "binlog_formats", ["mixed"]],
["include/have_binlog_format_mixed_or_row.inc",
"sup_binlog_formats", ["mixed","row"]],
"binlog_formats", ["mixed", "row"]],
["include/have_binlog_format_mixed_or_statement.inc",
"sup_binlog_formats", ["mixed","statement"]],
"binlog_formats", ["mixed", "statement"]],
["include/have_binlog_format_row_or_statement.inc",
"sup_binlog_formats", ["row","statement"]],
"binlog_formats", ["row", "statement"]],
["include/have_innodb.inc", "innodb_test", 1],
["include/have_log_bin.inc", "need_binlog", 1],
["include/big_test.inc", "big_test", 1],
["include/have_debug.inc", "need_debug", 1],
["include/have_ndb.inc", "ndb_test", 1],
......
mysql-test/lib/mtr_report.pl
View file @ f2a7af7b
......@@ -312,7 +312,7 @@ sub mtr_report_stats ($) {
/Slave: According to the master's version/ or
/Slave: Column [0-9]* type mismatch/ or
/Slave: Error .* doesn't exist/ or
/Slave: Error .*Deadlock found/ or
/Slave: Deadlock found/ or
/Slave: Error .*Unknown table/ or
/Slave: Error in Write_rows event: / or
/Slave: Field .* of table .* has no default value/ or
......
mysql-test/mysql-test-run.pl
View file @ f2a7af7b
......@@ -4356,21 +4356,12 @@ sub run_testcase_need_master_restart($)
# as the current test requires
elsif (! mtr_same_opts($master->[0]->{'start_opts'},
$tinfo->{'master_opt'}) )
{
# Chech that diff is binlog format only
my $diff_opts= mtr_diff_opts($master->[0]->{'start_opts'},$tinfo->{'master_opt'});
if (scalar(@$diff_opts) eq 2)
{
$do_restart= 1 unless ($diff_opts->[0] =~/^--binlog-format=/ and $diff_opts->[1] =~/^--binlog-format=/);
}
else
{
$do_restart= 1;
mtr_verbose("Restart master: running with different options '" .
join(" ", @{$tinfo->{'master_opt'}}) . "' != '" .
join(" ", @{$master->[0]->{'start_opts'}}) . "'" );
}
}
elsif( ! $master->[0]->{'pid'} )
{
if ( $opt_extern )
......
mysql-test/r/auto_increment.result
View file @ f2a7af7b
......@@ -454,3 +454,11 @@ select last_insert_id();
last_insert_id()
3
drop table t1;
create table t1 (a int primary key auto_increment, b int, c int, e int, d timestamp default current_timestamp, unique(b),unique(c),unique(e));
insert into t1 values(null,1,1,1,now());
insert into t1 values(null,0,0,0,null);
replace into t1 values(null,1,0,2,null);
select last_insert_id();
last_insert_id()
3
drop table t1;
mysql-test/r/compare.result
View file @ f2a7af7b
......@@ -90,4 +90,9 @@ Note 1276 Field or reference 'test.t2.a' of SELECT #2 was resolved in SELECT #1
Note 1276 Field or reference 'test.t2.a' of SELECT #2 was resolved in SELECT #1
Note 1003 select `test`.`t2`.`a` AS `a`,(select count(0) AS `COUNT(*)` from `test`.`t1` where ((`test`.`t1`.`b` = `test`.`t2`.`a`) and (concat(`test`.`t1`.`b`,`test`.`t1`.`c`) = concat('0',`test`.`t2`.`a`,'01')))) AS `x` from `test`.`t2` order by `test`.`t2`.`a`
DROP TABLE t1,t2;
CREATE TABLE t1 (a TIMESTAMP);
INSERT INTO t1 VALUES (NOW()),(NOW()),(NOW());
SELECT * FROM t1 WHERE a > '2008-01-01' AND a = '0000-00-00';
a
DROP TABLE t1;
End of 5.0 tests
mysql-test/r/ctype_cp932_binlog_stm.result
View file @ f2a7af7b
......@@ -40,9 +40,9 @@ IN ind DECIMAL(10,2))
BEGIN
INSERT INTO t4 VALUES (ins1, ins2, ind);
END
master-bin.000001 784 Query 1 992 use `test`; INSERT INTO t4 VALUES ( NAME_CONST('ins1',_latin1 0x466F6F2773206120426172), NAME_CONST('ins2',_cp932 0xED40ED41ED42), NAME_CONST('ind',47.93))
master-bin.000001 992 Query 1 1081 use `test`; DROP PROCEDURE bug18293
master-bin.000001 1081 Query 1 1160 use `test`; DROP TABLE t4
master-bin.000001 784 Query 1 1048 use `test`; INSERT INTO t4 VALUES ( NAME_CONST('ins1',_latin1 0x466F6F2773206120426172 COLLATE 'latin1_swedish_ci'), NAME_CONST('ins2',_cp932 0xED40ED41ED42 COLLATE 'cp932_japanese_ci'), NAME_CONST('ind',47.93))
master-bin.000001 1048 Query 1 1137 use `test`; DROP PROCEDURE bug18293
master-bin.000001 1137 Query 1 1216 use `test`; DROP TABLE t4
End of 5.0 tests
SHOW BINLOG EVENTS FROM 364;
ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
......
mysql-test/r/ctype_ucs.result
View file @ f2a7af7b
......@@ -1098,6 +1098,17 @@ ERROR HY000: Illegal mix of collations (ascii_general_ci,IMPLICIT) and (ucs2_gen
select * from t1 where a=if(b<10,_ucs2 0x0062,_ucs2 0x00C0);
ERROR HY000: Illegal mix of collations (ascii_general_ci,IMPLICIT) and (ucs2_general_ci,COERCIBLE) for operation '='
drop table t1;
CREATE TABLE t1 (s1 CHAR(5) CHARACTER SET UCS2);
INSERT INTO t1 VALUES ('a');
SET @@sql_mode=pad_char_to_full_length;
SELECT HEX(s1) FROM t1;
HEX(s1)
00610020002000200020
SET @@sql_mode=default;
SELECT HEX(s1) FROM t1;
HEX(s1)
0061
DROP TABLE t1;
set collation_connection=ucs2_general_ci;
drop table if exists t1;
create table t1 as
......
mysql-test/r/distinct.result
View file @ f2a7af7b
......@@ -608,6 +608,65 @@ id select_type table type possible_keys key key_len ref rows Extra
SELECT DISTINCT a,a FROM t1 WHERE b < 12 ORDER BY a;
a a
DROP TABLE t1;
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (id INT NOT NULL, fruit_id INT NOT NULL, fruit_name varchar(20)
default NULL);
INSERT INTO t1 VALUES (1,1,'ORANGE');
INSERT INTO t1 VALUES (2,2,'APPLE');
INSERT INTO t1 VALUES (3,2,'APPLE');
INSERT INTO t1 VALUES (4,3,'PEAR');
SELECT DISTINCT fruit_id, fruit_name INTO @v1, @v2 FROM t1 WHERE fruit_name =
'APPLE';
SELECT @v1, @v2;
@v1 @v2
2 APPLE
SELECT DISTINCT fruit_id, fruit_name INTO @v3, @v4 FROM t1 GROUP BY fruit_id,
fruit_name HAVING fruit_name = 'APPLE';
SELECT @v3, @v4;
@v3 @v4
2 APPLE
SELECT DISTINCT @v5:= fruit_id, @v6:= fruit_name INTO @v7, @v8 FROM t1 WHERE
fruit_name = 'APPLE';
SELECT @v5, @v6, @v7, @v8;
@v5 @v6 @v7 @v8
3 PEAR 3 PEAR
SELECT DISTINCT @v5 + fruit_id, CONCAT(@v6, fruit_name) INTO @v9, @v10 FROM t1
WHERE fruit_name = 'APPLE';
SELECT @v5, @v6, @v7, @v8, @v9, @v10;
@v5 @v6 @v7 @v8 @v9 @v10
3 PEAR 3 PEAR 5 PEARAPPLE
SELECT DISTINCT @v11:= @v5 + fruit_id, @v12:= CONCAT(@v6, fruit_name) INTO
@v13, @v14 FROM t1 WHERE fruit_name = 'APPLE';
SELECT @v11, @v12, @v13, @v14;
@v11 @v12 @v13 @v14
6 PEARPEAR 6 PEARPEAR
SELECT DISTINCT @v13, @v14 INTO @v15, @v16 FROM t1 WHERE fruit_name = 'APPLE';
SELECT @v15, @v16;
@v15 @v16
6 PEARPEAR
SELECT DISTINCT 2 + 2, 'Bob' INTO @v17, @v18 FROM t1 WHERE fruit_name =
'APPLE';
SELECT @v17, @v18;
@v17 @v18
4 Bob
DROP TABLE IF EXISTS t2;
CREATE TABLE t2 (fruit_id INT NOT NULL, fruit_name varchar(20)
default NULL);
SELECT DISTINCT fruit_id, fruit_name INTO OUTFILE
'../tmp/data1.tmp' FROM t1 WHERE fruit_name = 'APPLE';
LOAD DATA INFILE '../tmp/data1.tmp' INTO TABLE t2;
SELECT DISTINCT @v19:= fruit_id, @v20:= fruit_name INTO OUTFILE
'../tmp/data2.tmp' FROM t1 WHERE fruit_name = 'APPLE';
LOAD DATA INFILE '../tmp/data2.tmp' INTO TABLE t2;
SELECT @v19, @v20;
@v19 @v20
2 APPLE
SELECT * FROM t2;
fruit_id fruit_name
2 APPLE
2 APPLE
DROP TABLE t1;
DROP TABLE t2;
CREATE TABLE t1 (a CHAR(1));
INSERT INTO t1 VALUES('A'), (0);
SELECT a FROM t1 WHERE a=0;
......
mysql-test/r/events_2.result
View file @ f2a7af7b
......@@ -328,4 +328,81 @@ create event
очень_очень_очень_очень_очень_очень_очень_очень_длинная_строка_66
on schedule every 2 year do select 1;
ERROR 42000: Identifier name 'очень_очень_очень_очень_очень_очень_очень_очень_длинна' is too long
create event event_35981 on schedule every 6 month on completion preserve
disable
do
select 1;
The following SELECTs should all give 1
select count(*) from information_schema.events
where event_schema = database() and event_name = 'event_35981' and
on_completion = 'PRESERVE';
count(*)
1
alter event event_35981 enable;
select count(*) from information_schema.events
where event_schema = database() and event_name = 'event_35981' and
on_completion = 'PRESERVE';
count(*)
1
alter event event_35981 on completion not preserve;
select count(*) from information_schema.events
where event_schema = database() and event_name = 'event_35981' and
on_completion = 'NOT PRESERVE';
count(*)
1
alter event event_35981 disable;
select count(*) from information_schema.events
where event_schema = database() and event_name = 'event_35981' and
on_completion = 'NOT PRESERVE';
count(*)
1
alter event event_35981 on completion preserve;
select count(*) from information_schema.events
where event_schema = database() and event_name = 'event_35981' and
on_completion = 'PRESERVE';
count(*)
1
drop event event_35981;
create event event_35981 on schedule every 6 month disable
do
select 1;
select count(*) from information_schema.events
where event_schema = database() and event_name = 'event_35981' and
on_completion = 'NOT PRESERVE';
count(*)
1
drop event event_35981;
create event event_35981 on schedule every 1 hour starts current_timestamp
on completion not preserve
do
select 1;
alter event event_35981 on schedule every 1 hour starts '1999-01-01 00:00:00'
ends '1999-01-02 00:00:00';
ERROR HY000: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation.
drop event event_35981;
create event event_35981 on schedule every 1 hour starts current_timestamp
on completion not preserve
do
select 1;
alter event event_35981 on schedule every 1 hour starts '1999-01-01 00:00:00'
ends '1999-01-02 00:00:00' on completion preserve;
Warnings:
Note 1544 Event execution time is in the past. Event has been disabled
drop event event_35981;
create event event_35981 on schedule every 1 hour starts current_timestamp
on completion preserve
do
select 1;
alter event event_35981 on schedule every 1 hour starts '1999-01-01 00:00:00'
ends '1999-01-02 00:00:00';
Warnings:
Note 1544 Event execution time is in the past. Event has been disabled
alter event event_35981 on schedule every 1 hour starts '1999-01-01 00:00:00'
ends '1999-01-02 00:00:00' on completion not preserve;
ERROR HY000: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation.
alter event event_35981 on schedule every 1 hour starts '1999-01-01 00:00:00'
ends '1999-01-02 00:00:00' on completion preserve;
Warnings:
Note 1544 Event execution time is in the past. Event has been disabled
drop event event_35981;
drop database events_test;
mysql-test/r/federated.result
View file @ f2a7af7b
......@@ -9,7 +9,9 @@ DROP DATABASE IF EXISTS federated;
CREATE DATABASE federated;
DROP DATABASE IF EXISTS federated;
CREATE DATABASE federated;
SET @OLD_CONCURRENT_INSERT= @@GLOBAL.CONCURRENT_INSERT;
SET @OLD_MASTER_CONCURRENT_INSERT= @@GLOBAL.CONCURRENT_INSERT;
SET @@GLOBAL.CONCURRENT_INSERT= 0;
SET @OLD_SLAVE_CONCURRENT_INSERT= @@GLOBAL.CONCURRENT_INSERT;
SET @@GLOBAL.CONCURRENT_INSERT= 0;
DROP TABLE IF EXISTS federated.t1;
Warnings:
......@@ -186,6 +188,7 @@ INSERT INTO federated.t1 (name, other) VALUES ('Tenth Name', 101010);
SELECT * FROM federated.t1;
id name other created
1 First Name 11111 2004-04-04 04:04:04
10 Tenth Name 101010 2004-04-04 04:04:04
2 Second Name 22222 2004-04-04 04:04:04
3 Third Name 33333 2004-04-04 04:04:04
4 Fourth Name 44444 2004-04-04 04:04:04
......@@ -194,7 +197,6 @@ id name other created
7 Seventh Name 77777 2004-04-04 04:04:04
8 Eigth Name 88888 2004-04-04 04:04:04
9 Ninth Name 99999 2004-04-04 04:04:04
10 Tenth Name 101010 2004-04-04 04:04:04
SELECT * FROM federated.t1 WHERE id = 5;
id name other created
5 Fifth Name 55555 2004-04-04 04:04:04
......@@ -208,6 +210,7 @@ SELECT * FROM federated.t1 WHERE name = 'Sixth Name' AND other = 44444;
id name other created
SELECT * FROM federated.t1 WHERE name like '%th%';
id name other created
10 Tenth Name 101010 2004-04-04 04:04:04
3 Third Name 33333 2004-04-04 04:04:04
4 Fourth Name 44444 2004-04-04 04:04:04
5 Fifth Name 55555 2004-04-04 04:04:04
......@@ -215,7 +218,6 @@ id name other created
7 Seventh Name 77777 2004-04-04 04:04:04
8 Eigth Name 88888 2004-04-04 04:04:04
9 Ninth Name 99999 2004-04-04 04:04:04
10 Tenth Name 101010 2004-04-04 04:04:04
UPDATE federated.t1 SET name = '3rd name' WHERE id = 3;
SELECT * FROM federated.t1 WHERE name = '3rd name';
id name other created
......@@ -336,6 +338,7 @@ VALUES ('Tenth Name', 101010, '2005-03-12 12:00:01');
SELECT * FROM federated.t1;
id name other created
1 First Name 11111 2004-01-01 01:01:01
10 Tenth Name 101010 2005-03-12 12:00:01
2 Second Name 22222 2004-01-23 02:43:00
3 Third Name 33333 2004-02-14 02:14:00
4 Fourth Name 44444 2003-04-05 00:00:00
......@@ -344,7 +347,6 @@ id name other created
7 Seventh Name 77777 2003-12-12 18:32:00
8 Eigth Name 88888 2005-03-12 11:00:00
9 Ninth Name 99999 2005-03-12 11:00:01
10 Tenth Name 101010 2005-03-12 12:00:01
SELECT * FROM federated.t1 WHERE id = 5;
id name other created
5 Fifth Name 55555 2001-02-02 02:02:02
......@@ -356,6 +358,7 @@ id name other created
4 Fourth Name 44444 2003-04-05 00:00:00
SELECT * FROM federated.t1 WHERE name like '%th%';
id name other created
10 Tenth Name 101010 2005-03-12 12:00:01
3 Third Name 33333 2004-02-14 02:14:00
4 Fourth Name 44444 2003-04-05 00:00:00
5 Fifth Name 55555 2001-02-02 02:02:02
......@@ -363,7 +366,6 @@ id name other created
7 Seventh Name 77777 2003-12-12 18:32:00
8 Eigth Name 88888 2005-03-12 11:00:00
9 Ninth Name 99999 2005-03-12 11:00:01
10 Tenth Name 101010 2005-03-12 12:00:01
UPDATE federated.t1 SET name = '3rd name' WHERE id = 3;
SELECT * FROM federated.t1 WHERE name = '3rd name';
id name other created
......@@ -470,17 +472,17 @@ id name other
7 Seventh Name NULL
SELECT * FROM federated.t1 WHERE name IS NULL;
id name other
4 NULL NULL
10 NULL fee fie foe fum
4 NULL NULL
SELECT * FROM federated.t1 WHERE name IS NULL and other IS NULL;
id name other
4 NULL NULL
SELECT * FROM federated.t1 WHERE name IS NULL or other IS NULL;
id name other
10 NULL fee fie foe fum
2 Second Name NULL
4 NULL NULL
7 Seventh Name NULL
10 NULL fee fie foe fum
UPDATE federated.t1
SET name = 'Fourth Name', other = 'four four four'
WHERE name IS NULL AND other IS NULL;
......@@ -492,6 +494,7 @@ id name other
SELECT * FROM federated.t1;
id name other
1 First Name 11111
10 Tenth Name fee fie foe fum
2 Second Name two two two two
3 Third Name 33333
4 Fourth Name four four four
......@@ -500,7 +503,6 @@ id name other
7 Seventh Name seven seven
8 Eigth Name 88888
9 Ninth Name 99999
10 Tenth Name fee fie foe fum
DROP TABLE IF EXISTS federated.t1;
CREATE TABLE federated.t1 (
`id` int(20) NOT NULL auto_increment,
......@@ -681,8 +683,8 @@ id col1 col2 col3 col4
SELECT * FROM federated.t1 WHERE (id = 5 AND col2 = 'five 5 five five 5')
OR (col2 = 'three Three' AND col3 = 33);
id col1 col2 col3 col4
5 5 five 5 five five 5 5 55555
3 3 three Three 33 33333
5 5 five 5 five five 5 5 55555
SELECT * FROM federated.t1 WHERE (id = 5 AND col2 = 'Two two')
OR (col2 = 444 AND col3 = 4444444);
id col1 col2 col3 col4
......@@ -693,25 +695,25 @@ OR col3 = 33
OR col4 = 4444444;
id col1 col2 col3 col4
1 1 one One 11 1111
10 10 Tenth ten TEN 1010101 1010
2 2 Two two 22 2222
3 3 three Three 33 33333
4 4 fourfourfour 444 4444444
10 10 Tenth ten TEN 1010101 1010
SELECT * FROM federated.t1 WHERE id > 5;
id col1 col2 col3 col4
10 10 Tenth ten TEN 1010101 1010
6 6 six six Sixsix 6666 6
7 7 seven Sevenseven 77777 7777
8 8 eight eight eight 88888 88
9 9 nine Nine 999999 999999
10 10 Tenth ten TEN 1010101 1010
SELECT * FROM federated.t1 WHERE id >= 5;
id col1 col2 col3 col4
10 10 Tenth ten TEN 1010101 1010
5 5 five 5 five five 5 5 55555
6 6 six six Sixsix 6666 6
7 7 seven Sevenseven 77777 7777
8 8 eight eight eight 88888 88
9 9 nine Nine 999999 999999
10 10 Tenth ten TEN 1010101 1010
SELECT * FROM federated.t1 WHERE id < 5;
id col1 col2 col3 col4
1 1 one One 11 1111
......@@ -728,6 +730,7 @@ id col1 col2 col3 col4
SELECT * FROM federated.t1 WHERE id != 5;
id col1 col2 col3 col4
1 1 one One 11 1111
10 10 Tenth ten TEN 1010101 1010
2 2 Two two 22 2222
3 3 three Three 33 33333
4 4 fourfourfour 444 4444444
......@@ -735,7 +738,6 @@ id col1 col2 col3 col4
7 7 seven Sevenseven 77777 7777
8 8 eight eight eight 88888 88
9 9 nine Nine 999999 999999
10 10 Tenth ten TEN 1010101 1010
SELECT * FROM federated.t1 WHERE id > 3 AND id < 7;
id col1 col2 col3 col4
4 4 fourfourfour 444 4444444
......@@ -763,25 +765,25 @@ id col1 col2 col3 col4
SELECT * FROM federated.t1 WHERE id < 3 OR id > 7;
id col1 col2 col3 col4
1 1 one One 11 1111
10 10 Tenth ten TEN 1010101 1010
2 2 Two two 22 2222
8 8 eight eight eight 88888 88
9 9 nine Nine 999999 999999
10 10 Tenth ten TEN 1010101 1010
SELECT * FROM federated.t1 WHERE col2 = 'three Three';
id col1 col2 col3 col4
3 3 three Three 33 33333
SELECT * FROM federated.t1 WHERE col2 > 'one';
id col1 col2 col3 col4
1 1 one One 11 1111
10 10 Tenth ten TEN 1010101 1010
2 2 Two two 22 2222
3 3 three Three 33 33333
6 6 six six Sixsix 6666 6
7 7 seven Sevenseven 77777 7777
10 10 Tenth ten TEN 1010101 1010
SELECT * FROM federated.t1 WHERE col2 LIKE 's%';
id col1 col2 col3 col4
7 7 seven Sevenseven 77777 7777
6 6 six six Sixsix 6666 6
7 7 seven Sevenseven 77777 7777
SELECT * FROM federated.t1 WHERE col2 LIKE 'si%';
id col1 col2 col3 col4
6 6 six six Sixsix 6666 6
......@@ -791,6 +793,7 @@ id col1 col2 col3 col4
SELECT * FROM federated.t1 WHERE col2 NOT LIKE 'e%';
id col1 col2 col3 col4
1 1 one One 11 1111
10 10 Tenth ten TEN 1010101 1010
2 2 Two two 22 2222
3 3 three Three 33 33333
4 4 fourfourfour 444 4444444
......@@ -798,18 +801,17 @@ id col1 col2 col3 col4
6 6 six six Sixsix 6666 6
7 7 seven Sevenseven 77777 7777
9 9 nine Nine 999999 999999
10 10 Tenth ten TEN 1010101 1010
SELECT * FROM federated.t1 WHERE col2 <> 'one One';
id col1 col2 col3 col4
4 4 fourfourfour 444 4444444
5 5 five 5 five five 5 5 55555
8 8 eight eight eight 88888 88
9 9 nine Nine 999999 999999
10 10 Tenth ten TEN 1010101 1010
2 2 Two two 22 2222
3 3 three Three 33 33333
4 4 fourfourfour 444 4444444
5 5 five 5 five five 5 5 55555
6 6 six six Sixsix 6666 6
7 7 seven Sevenseven 77777 7777
10 10 Tenth ten TEN 1010101 1010
8 8 eight eight eight 88888 88
9 9 nine Nine 999999 999999
DROP TABLE IF EXISTS federated.t1;
CREATE TABLE federated.t1 (
`col1` varchar(8) NOT NULL DEFAULT '',
......@@ -976,11 +978,11 @@ INSERT INTO federated.t1 (name, floatval, other)
VALUES (0, 00.3333, NULL);
SELECT * FROM federated.t1;
id name floatval other
1 NULL NULL NULL
NULL 0 0.3333 NULL
NULL NULL NULL NULL
NULL NULL NULL NULL
1 NULL NULL NULL
NULL foo 33.3333 NULL
NULL 0 0.3333 NULL
SELECT count(*) FROM federated.t1
WHERE id IS NULL
AND name IS NULL
......@@ -2132,6 +2134,8 @@ End of 5.0 tests
create server 's1' foreign data wrapper 'mysql' options (port 3306);
drop server 's1';
End of 5.1 tests
SET @@GLOBAL.CONCURRENT_INSERT= @OLD_MASTER_CONCURRENT_INSERT;
SET @@GLOBAL.CONCURRENT_INSERT= @OLD_SLAVE_CONCURRENT_INSERT;
DROP TABLE IF EXISTS federated.t1;
DROP DATABASE IF EXISTS federated;
DROP TABLE IF EXISTS federated.t1;
......
mysql-test/r/loaddata.result
View file @ f2a7af7b
......@@ -337,6 +337,126 @@ DROP VIEW v2;
DROP VIEW v3;
# -- End of Bug#35469.
Bug#37114
SET SESSION character_set_client=latin1;
SET SESSION character_set_server=latin1;
SET SESSION character_set_connection=latin1;
SET @OLD_SQL_MODE=@@SESSION.SQL_MODE;
test LOAD DATA INFILE
SET sql_mode = '';
SELECT '1 \\aa\n' INTO DUMPFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt';
CREATE TABLE t1 (id INT, val1 CHAR(3)) ENGINE=MyISAM;
SET sql_mode = 'NO_BACKSLASH_ESCAPES';
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' REPLACE INTO TABLE t1 FIELDS TERMINATED BY ' ';
SELECT * FROM t1;
id val1
1 \aa
SELECT * INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug37114_out.txt' FIELDS ESCAPED BY '' TERMINATED BY ' ' FROM t1;
SELECT * INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug37114_out.txt' FIELDS TERMINATED BY ' ' FROM t1;
INSERT INTO t1 (id, val1) VALUES (1, '\aa');
SELECT * FROM t1;
id val1
1 \aa
1 \aa
SET sql_mode='';
INSERT INTO t1 (id, val1) VALUES (1, '\aa');
SELECT * FROM t1;
id val1
1 \aa
1 \aa
1 aa
DROP TABLE t1;
test SELECT INTO OUTFILE
CREATE TABLE t1 (id INT PRIMARY KEY, val1 CHAR(4));
CREATE TABLE t2 LIKE t1;
SET sql_mode = '';
INSERT INTO t1 (id, val1) VALUES (5, '\ttab');
INSERT INTO t1 (id, val1) VALUES (4, '\\r');
SET sql_mode = 'NO_BACKSLASH_ESCAPES';
INSERT INTO t1 (id, val1) VALUES (3, '\tx');
1.1 NO_BACKSLASH_ESCAPES, use defaults for ESCAPED BY
SELECT * INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' FIELDS TERMINATED BY ' ' FROM t1 ORDER BY id;
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' INTO TABLE t2 FIELDS TERMINATED BY ' ';
SELECT 'before' AS t, id, val1, hex(val1) FROM t1 UNION
SELECT 'after' AS t, id, val1, hex(val1) FROM t2 ORDER BY id,t DESC;
t id val1 hex(val1)
before 3 \tx 5C7478
after 3 \tx 5C7478
before 4 \r 5C72
after 4 \r 5C72
before 5 tab 09746162
after 5 tab 09746162
TRUNCATE t2;
SELECT LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt");
LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt")
3 \tx
4 \r
5 tab
1.2 NO_BACKSLASH_ESCAPES, override defaults for ESCAPED BY
SELECT * INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' FIELDS ESCAPED BY '\' TERMINATED BY ' ' FROM t1 ORDER BY id;
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' INTO TABLE t2 FIELDS ESCAPED BY '\' TERMINATED BY ' ';
SELECT 'before' AS t, id, val1, hex(val1) FROM t1 UNION
SELECT 'after' AS t, id, val1, hex(val1) FROM t2 ORDER BY id,t DESC;
t id val1 hex(val1)
before 3 \tx 5C7478
after 3 \tx 5C7478
before 4 \r 5C72
after 4 \r 5C72
before 5 tab 09746162
after 5 tab 09746162
TRUNCATE t2;
SELECT LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt");
LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt")
3 \\tx
4 \\r
5 tab
SET sql_mode = '';
2.1 !NO_BACKSLASH_ESCAPES, use defaults for ESCAPED BY
SELECT * INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' FIELDS TERMINATED BY ' ' FROM t1 ORDER BY id;
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' INTO TABLE t2 FIELDS TERMINATED BY ' ';
SELECT 'before' AS t, id, val1, hex(val1) FROM t1 UNION
SELECT 'after' AS t, id, val1, hex(val1) FROM t2 ORDER BY id,t DESC;
t id val1 hex(val1)
before 3 \tx 5C7478
after 3 \tx 5C7478
before 4 \r 5C72
after 4 \r 5C72
before 5 tab 09746162
after 5 tab 09746162
TRUNCATE t2;
SET sql_mode = 'NO_BACKSLASH_ESCAPES';
SELECT LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt");
LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt")
3 \\tx
4 \\r
5 tab
SET sql_mode = '';
2.2 !NO_BACKSLASH_ESCAPES, override defaults for ESCAPED BY
SELECT * INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' FIELDS ESCAPED BY '' TERMINATED BY ' ' FROM t1 ORDER BY id;
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug37114.txt' INTO TABLE t2 FIELDS ESCAPED BY '' TERMINATED BY ' ';
SELECT 'before' AS t, id, val1, hex(val1) FROM t1 UNION
SELECT 'after' AS t, id, val1, hex(val1) FROM t2 ORDER BY id,t DESC;
t id val1 hex(val1)
before 3 \tx 5C7478
after 3 \tx 5C7478
before 4 \r 5C72
after 4 \r 5C72
before 5 tab 09746162
after 5 tab 09746162
TRUNCATE t2;
SET sql_mode = 'NO_BACKSLASH_ESCAPES';
SELECT LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt");
LOAD_FILE("MYSQLTEST_VARDIR/tmp/bug37114.txt")
3 \tx
4 \r
5 tab
set session sql_mode=@OLD_SQL_MODE;
DROP TABLE t1,t2;
End of 5.0 tests
CREATE TABLE t1 (a int);
INSERT INTO t1 VALUES (1);
SET NAMES latin1;
......@@ -364,3 +484,4 @@ SET character_set_filesystem=default;
select @@character_set_filesystem;
@@character_set_filesystem
binary
End of 5.1 tests
mysql-test/r/log_tables.result
View file @ f2a7af7b
......@@ -832,6 +832,35 @@ Execute select '000 001 002 003 004 005 006 007 008 009010 011 012 013 014 015 0
Query set global general_log = off
deallocate prepare long_query;
set global general_log = @old_general_log_state;
DROP TABLE IF EXISTS log_count;
DROP TABLE IF EXISTS slow_log_copy;
DROP TABLE IF EXISTS general_log_copy;
CREATE TABLE log_count (count BIGINT(21));
SET @old_general_log_state = @@global.general_log;
SET @old_slow_log_state = @@global.slow_query_log;
SET GLOBAL general_log = ON;
SET GLOBAL slow_query_log = ON;
CREATE TABLE slow_log_copy SELECT * FROM mysql.slow_log;
INSERT INTO slow_log_copy SELECT * FROM mysql.slow_log;
INSERT INTO log_count (count) VALUES ((SELECT count(*) FROM mysql.slow_log));
DROP TABLE slow_log_copy;
CREATE TABLE general_log_copy SELECT * FROM mysql.general_log;
INSERT INTO general_log_copy SELECT * FROM mysql.general_log;
INSERT INTO log_count (count) VALUES ((SELECT count(*) FROM mysql.general_log));
DROP TABLE general_log_copy;
SET GLOBAL general_log = OFF;
SET GLOBAL slow_query_log = OFF;
CREATE TABLE slow_log_copy SELECT * FROM mysql.slow_log;
INSERT INTO slow_log_copy SELECT * FROM mysql.slow_log;
INSERT INTO log_count (count) VALUES ((SELECT count(*) FROM mysql.slow_log));
DROP TABLE slow_log_copy;
CREATE TABLE general_log_copy SELECT * FROM mysql.general_log;
INSERT INTO general_log_copy SELECT * FROM mysql.general_log;
INSERT INTO log_count (count) VALUES ((SELECT count(*) FROM mysql.general_log));
DROP TABLE general_log_copy;
SET GLOBAL general_log = @old_general_log_state;
SET GLOBAL slow_query_log = @old_slow_log_state;
DROP TABLE log_count;
SET @old_slow_log_state = @@global.slow_query_log;
SET SESSION long_query_time = 0;
SET GLOBAL slow_query_log = ON;
......
mysql-test/r/mysqldump-max.result
View file @ f2a7af7b
......@@ -277,3 +277,16 @@ drop table t3;
drop table t4;
drop table t5;
drop table t6;
SELECT @@global.storage_engine INTO @old_engine;
SET GLOBAL storage_engine=InnoDB;
CREATE VIEW v1 AS SELECT * FROM t1;
INSERT INTO t1 VALUES();
SELECT COUNT(*) FROM v1;
COUNT(*)
1
SELECT COUNT(*) FROM v1;
COUNT(*)
1
DROP VIEW v1;
DROP TABLE t1;
SET GLOBAL storage_engine=@old_engine;
mysql-test/r/mysqldump.result
View file @ f2a7af7b
Bug#37938 - Test "mysqldump" lacks various insert statements
Turn off concurrent inserts to avoid random errors
NOTE: We reset the variable back to saved value at the end of test
SET @OLD_CONCURRENT_INSERT = @@GLOBAL.CONCURRENT_INSERT;
SET @@GLOBAL.CONCURRENT_INSERT = 0;
DROP TABLE IF EXISTS t1, `"t"1`, t1aa, t2, t2aa, t3;
drop database if exists mysqldump_test_db;
drop database if exists db1;
......@@ -1999,7 +2004,7 @@ SET @saved_cs_client = @@character_set_client;
SET character_set_client = utf8;
/*!50001 CREATE TABLE `v2` (
`a` varchar(30)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
/*!50001 DROP TABLE `v2`*/;
/*!50001 DROP VIEW IF EXISTS `v2`*/;
......@@ -2096,7 +2101,7 @@ SET @saved_cs_client = @@character_set_client;
SET character_set_client = utf8;
/*!50001 CREATE TABLE `v1` (
`a` int(11)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
/*!50001 DROP TABLE `v1`*/;
/*!50001 DROP VIEW IF EXISTS `v1`*/;
......@@ -2170,7 +2175,7 @@ SET @saved_cs_client = @@character_set_client;
SET character_set_client = utf8;
/*!50001 CREATE TABLE `v2` (
`a` varchar(30)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
/*!50001 DROP TABLE `v2`*/;
/*!50001 DROP VIEW IF EXISTS `v2`*/;
......@@ -2286,7 +2291,7 @@ SET character_set_client = utf8;
`a` int(11),
`b` int(11),
`c` varchar(30)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
DROP TABLE IF EXISTS `v2`;
/*!50001 DROP VIEW IF EXISTS `v2`*/;
......@@ -2294,7 +2299,7 @@ SET @saved_cs_client = @@character_set_client;
SET character_set_client = utf8;
/*!50001 CREATE TABLE `v2` (
`a` int(11)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
DROP TABLE IF EXISTS `v3`;
/*!50001 DROP VIEW IF EXISTS `v3`*/;
......@@ -2304,7 +2309,7 @@ SET character_set_client = utf8;
`a` int(11),
`b` int(11),
`c` varchar(30)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
/*!50001 DROP TABLE `v1`*/;
/*!50001 DROP VIEW IF EXISTS `v1`*/;
......@@ -3041,7 +3046,7 @@ SET character_set_client = utf8;
`a` int(11),
`b` varchar(32),
`c` varchar(32)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
DROP TABLE IF EXISTS `v1`;
/*!50001 DROP VIEW IF EXISTS `v1`*/;
......@@ -3051,7 +3056,7 @@ SET character_set_client = utf8;
`a` int(11),
`b` varchar(32),
`c` varchar(32)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
DROP TABLE IF EXISTS `v2`;
/*!50001 DROP VIEW IF EXISTS `v2`*/;
......@@ -3061,7 +3066,7 @@ SET character_set_client = utf8;
`a` int(11),
`b` varchar(32),
`c` varchar(32)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
USE `test`;
......@@ -3441,7 +3446,7 @@ SET @saved_cs_client = @@character_set_client;
SET character_set_client = utf8;
/*!50001 CREATE TABLE `v1` (
`id` int(11)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
USE `mysqldump_test_db`;
......@@ -3501,7 +3506,7 @@ SET @saved_cs_client = @@character_set_client;
SET character_set_client = utf8;
/*!50001 CREATE TABLE `nasishnasifu` (
`id` bigint(20) unsigned
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
USE `mysqldump_tables`;
......@@ -3959,7 +3964,7 @@ SET @saved_cs_client = @@character_set_client;
SET character_set_client = utf8;
/*!50001 CREATE TABLE `v1` (
`id` int(11)
) */;
) ENGINE=MyISAM */;
SET character_set_client = @saved_cs_client;
USE `mysqldump_test_db`;
......@@ -4089,6 +4094,7 @@ DROP DATABASE mysqldump_test_db;
# -- End of test case for Bug#32538.
SET @@GLOBAL.CONCURRENT_INSERT = @OLD_CONCURRENT_INSERT;
#
# End of 5.1 tests
#
mysql-test/r/partition_range.result
View file @ f2a7af7b
......@@ -742,3 +742,23 @@ WHERE (a >= '2004-07-01' AND a <= '2004-09-30') OR
id select_type table partitions type possible_keys key key_len ref rows Extra
1 SIMPLE t1 p407,p408,p409,p507,p508,p509 ALL NULL NULL NULL NULL 18 Using where
DROP TABLE t1;
create table t1 (a int);
insert into t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
CREATE TABLE t2 (
defid int(10) unsigned NOT NULL,
day int(10) unsigned NOT NULL,
count int(10) unsigned NOT NULL,
filler char(200),
KEY (defid,day)
)
PARTITION BY RANGE (day) (
PARTITION p7 VALUES LESS THAN (20070401) ,
PARTITION p8 VALUES LESS THAN (20070501));
insert into t2 select 20, 20070311, 1, 'filler' from t1 A, t1 B;
insert into t2 select 20, 20070411, 1, 'filler' from t1 A, t1 B;
insert into t2 values(52, 20070321, 123, 'filler') ;
insert into t2 values(52, 20070322, 456, 'filler') ;
select sum(count) from t2 ch where ch.defid in (50,52) and ch.day between 20070320 and 20070401 group by defid;
sum(count)
579
drop table t1, t2;
mysql-test/r/skip_log_bin.result 0 → 100644
View file @ f2a7af7b
DROP TABLE IF EXISTS t1, t2;
set @@session.binlog_format=row;
create table t1 (a int);
insert into t1 values (1);
create table t2 select * from t1;
drop table t1, t2;
mysql-test/r/sp-error.result
View file @ f2a7af7b
......@@ -1628,6 +1628,13 @@ end loop label1;
end loop;
end|
ERROR 42000: End-label label1 without match
CREATE TABLE t1 (a INT)|
INSERT INTO t1 VALUES (1),(2)|
CREATE PROCEDURE p1(a INT) BEGIN END|
CALL p1((SELECT * FROM t1))|
ERROR 21000: Subquery returns more than 1 row
DROP PROCEDURE IF EXISTS p1|
DROP TABLE t1|
drop procedure if exists p1;
create procedure p1()
begin
......
mysql-test/r/sp.result
View file @ f2a7af7b
......@@ -6836,6 +6836,16 @@ drop procedure p1;
drop function f1;
drop view v1;
drop table t1;
drop procedure if exists `p2` $
create procedure `p2`(in `a` text charset utf8)
begin
declare `pos` int default 1;
declare `str` text charset utf8;
set `str` := `a`;
select substr(`str`, `pos`+ 1 ) into `str`;
end $
call `p2`('s s s s s s');
drop procedure `p2`;
# ------------------------------------------------------------------
# -- End of 5.0 tests
# ------------------------------------------------------------------
......
mysql-test/r/user_var.result
View file @ f2a7af7b
......@@ -121,8 +121,8 @@ select @a:=0;
select @a+0, @a:=@a+0+count(*), count(*), @a+0 from t1 group by i;
@a+0 @a:=@a+0+count(*) count(*) @a+0
0 1 1 0
1 3 2 0
3 6 3 0
0 2 2 0
0 3 3 0
set @a=0;
select @a,@a:="hello",@a,@a:=3,@a,@a:="hello again" from t1 group by i;
@a @a:="hello" @a @a:=3 @a @a:="hello again"
......@@ -370,4 +370,33 @@ select @rownum := @rownum + 1 as row,
@prev_score := a as score
from t1 order by score desc;
drop table t1;
create table t1(b bigint);
insert into t1 (b) values (10), (30), (10);
set @var := 0;
select if(b=@var, 999, b) , @var := b from t1 order by b;
if(b=@var, 999, b) @var := b
10 10
999 10
30 30
drop table t1;
create temporary table t1 (id int);
insert into t1 values (2), (3), (3), (4);
set @lastid=-1;
select @lastid != id, @lastid, @lastid := id from t1;
@lastid != id @lastid @lastid := id
1 -1 2
1 2 3
0 3 3
1 3 4
drop table t1;
create temporary table t1 (id bigint);
insert into t1 values (2), (3), (3), (4);
set @lastid=-1;
select @lastid != id, @lastid, @lastid := id from t1;
@lastid != id @lastid @lastid := id
1 -1 2
1 2 3
0 3 3
1 3 4
drop table t1;
End of 5.1 tests
mysql-test/suite/binlog/r/binlog_mix_innodb_stat.result 0 → 100644
View file @ f2a7af7b
flush status;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 0
show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 0
drop table if exists t1;
create table t1 (a int) engine=innodb;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 1
show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 1
begin;
delete from t1;
commit;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 2
show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 1
drop table t1;
mysql-test/suite/binlog/r/binlog_row_binlog.result
View file @ f2a7af7b
......@@ -1090,6 +1090,53 @@ master-bin.000001 295 Table_map 1 337 table_id: # (test.t1)
master-bin.000001 337 Write_rows 1 383 table_id: # flags: STMT_END_F
master-bin.000001 383 Query 1 452 use `test`; COMMIT
master-bin.000001 452 Query 1 528 use `test`; drop table t1
reset master;
CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
USE bug39182;
CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
CREATE PROCEDURE p1()
BEGIN
DECLARE s1 VARCHAR(255);
SET s1= "test";
CREATE TEMPORARY TABLE tmp1
SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
SELECT
COLLATION(NAME_CONST('s1', _utf8'test')) c1,
COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
COLLATION(s1) c3,
COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
COERCIBILITY(s1) d3;
DROP TEMPORARY TABLE tmp1;
END//
CALL p1();
c1 c2 c3 d1 d2 d3
utf8_general_ci utf8_unicode_ci utf8_unicode_ci 2 2 2
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci
master-bin.000001 # Query # # use `bug39182`; CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci
master-bin.000001 # Query # # use `bug39182`; CREATE DEFINER=`root`@`localhost` PROCEDURE `p1`()
BEGIN
DECLARE s1 VARCHAR(255);
SET s1= "test";
CREATE TEMPORARY TABLE tmp1
SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
SELECT
COLLATION(NAME_CONST('s1', _utf8'test')) c1,
COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
COLLATION(s1) c3,
COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
COERCIBILITY(s1) d3;
DROP TEMPORARY TABLE tmp1;
END
DROP PROCEDURE p1;
DROP TABLE t1;
DROP DATABASE bug39182;
USE test;
End of 5.0 tests
reset master;
create table t1 (id tinyint auto_increment primary key);
......
mysql-test/suite/binlog/r/binlog_row_innodb_stat.result
View file @ f2a7af7b
flush status;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 0
......@@ -22,18 +23,3 @@ show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 1
drop table t1;
show status like "Innodb_buffer_pool_pages_total";
Variable_name Value
Innodb_buffer_pool_pages_total 512
show status like "Innodb_page_size";
Variable_name Value
Innodb_page_size 16384
show status like "Innodb_rows_deleted";
Variable_name Value
Innodb_rows_deleted 2000
show status like "Innodb_rows_inserted";
Variable_name Value
Innodb_rows_inserted 2000
show status like "Innodb_rows_updated";
Variable_name Value
Innodb_rows_updated 0
mysql-test/suite/binlog/r/binlog_stm_binlog.result
View file @ f2a7af7b
......@@ -594,6 +594,56 @@ master-bin.000001 4 Format_desc 1 106 Server version, Binlog ver: 4
master-bin.000001 106 Query 1 227 use `test`; create table t1 (a bigint unsigned, b bigint(20) unsigned)
master-bin.000001 227 Query 1 351 use `test`; insert into t1 values (9999999999999999,14632475938453979136)
master-bin.000001 351 Query 1 427 use `test`; drop table t1
reset master;
CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
USE bug39182;
CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
CREATE PROCEDURE p1()
BEGIN
DECLARE s1 VARCHAR(255);
SET s1= "test";
CREATE TEMPORARY TABLE tmp1
SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
SELECT
COLLATION(NAME_CONST('s1', _utf8'test')) c1,
COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
COLLATION(s1) c3,
COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
COERCIBILITY(s1) d3;
DROP TEMPORARY TABLE tmp1;
END//
CALL p1();
c1 c2 c3 d1 d2 d3
utf8_general_ci utf8_unicode_ci utf8_unicode_ci 2 2 2
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # CREATE DATABASE bug39182 DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci
master-bin.000001 # Query # # use `bug39182`; CREATE TABLE t1 (a VARCHAR(255) COLLATE utf8_unicode_ci)
DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci
master-bin.000001 # Query # # use `bug39182`; CREATE DEFINER=`root`@`localhost` PROCEDURE `p1`()
BEGIN
DECLARE s1 VARCHAR(255);
SET s1= "test";
CREATE TEMPORARY TABLE tmp1
SELECT * FROM t1 WHERE a LIKE CONCAT("%", s1, "%");
SELECT
COLLATION(NAME_CONST('s1', _utf8'test')) c1,
COLLATION(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) c2,
COLLATION(s1) c3,
COERCIBILITY(NAME_CONST('s1', _utf8'test')) d1,
COERCIBILITY(NAME_CONST('s1', _utf8'test' COLLATE utf8_unicode_ci)) d2,
COERCIBILITY(s1) d3;
DROP TEMPORARY TABLE tmp1;
END
master-bin.000001 # Query # # use `bug39182`; CREATE TEMPORARY TABLE tmp1
SELECT * FROM t1 WHERE a LIKE CONCAT("%", NAME_CONST('s1',_utf8'test' COLLATE 'utf8_unicode_ci'), "%")
master-bin.000001 # Query # # use `bug39182`; DROP TEMPORARY TABLE tmp1
DROP PROCEDURE p1;
DROP TABLE t1;
DROP DATABASE bug39182;
USE test;
End of 5.0 tests
reset master;
create table t1 (id tinyint auto_increment primary key);
......
mysql-test/suite/binlog/r/binlog_stm_innodb_stat.result
View file @ f2a7af7b
flush status;
show status like "binlog_cache_use";
Variable_name Value
Binlog_cache_use 0
......@@ -22,18 +23,3 @@ show status like "binlog_cache_disk_use";
Variable_name Value
Binlog_cache_disk_use 1
drop table t1;
show status like "Innodb_buffer_pool_pages_total";
Variable_name Value
Innodb_buffer_pool_pages_total 512
show status like "Innodb_page_size";
Variable_name Value
Innodb_page_size 16384
show status like "Innodb_rows_deleted";
Variable_name Value
Innodb_rows_deleted 2000
show status like "Innodb_rows_inserted";
Variable_name Value
Innodb_rows_inserted 2000
show status like "Innodb_rows_updated";
Variable_name Value
Innodb_rows_updated 0
mysql-test/suite/binlog/r/binlog_stm_row.result 0 → 100644
View file @ f2a7af7b
DROP TABLE IF EXISTS t1;
DROP TABLE IF EXISTS t2;
SET GLOBAL BINLOG_FORMAT = STATEMENT;
SET SESSION BINLOG_FORMAT = STATEMENT;
CREATE TABLE t1 (a INT);
CREATE TABLE t2 LIKE t1;
select @@SESSION.BINLOG_FORMAT;
@@SESSION.BINLOG_FORMAT
STATEMENT
INSERT INTO t1 VALUES(1);
INSERT INTO t2 VALUES(2);
#
# Ensure that INSERT INTO .. SELECT FROM under SBR takes a read
# lock that will prevent the source table from being modified.
#
# con1
SELECT GET_LOCK('Bug#34306', 120);
GET_LOCK('Bug#34306', 120)
1
# con2
PREPARE stmt FROM "INSERT INTO t1 SELECT * FROM t2 WHERE GET_LOCK('Bug#34306', 120)";
EXECUTE stmt;;
# default
INSERT INTO t2 VALUES (3);;
# con1
SELECT RELEASE_LOCK('Bug#34306');
RELEASE_LOCK('Bug#34306')
1
# con2
SELECT RELEASE_LOCK('Bug#34306');
RELEASE_LOCK('Bug#34306')
1
# default
#
# Ensure that INSERT INTO .. SELECT FROM prepared under SBR does
# not prevent the source table from being modified if under RBR.
#
# con2
SET SESSION BINLOG_FORMAT = ROW;
# con1
SELECT GET_LOCK('Bug#34306', 120);
GET_LOCK('Bug#34306', 120)
1
# con2
EXECUTE stmt;;
# default
# con1
INSERT INTO t2 VALUES (4);
SELECT RELEASE_LOCK('Bug#34306');
RELEASE_LOCK('Bug#34306')
1
# con2
# default
# Show binlog events
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS t1
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS t2
master-bin.000001 # Query # # use `test`; CREATE TABLE t1 (a INT)
master-bin.000001 # Query # # use `test`; CREATE TABLE t2 LIKE t1
master-bin.000001 # Query # # use `test`; INSERT INTO t1 VALUES(1)
master-bin.000001 # Query # # use `test`; INSERT INTO t2 VALUES(2)
master-bin.000001 # Query # # use `test`; INSERT INTO t1 SELECT * FROM t2 WHERE GET_LOCK('Bug#34306', 120)
master-bin.000001 # Query # # use `test`; INSERT INTO t2 VALUES (3)
master-bin.000001 # Query # # use `test`; INSERT INTO t2 VALUES (4)
master-bin.000001 # Query # # use `test`; BEGIN
master-bin.000001 # Table_map # # table_id: # (test.t1)
master-bin.000001 # Write_rows # # table_id: # flags: STMT_END_F
master-bin.000001 # Query # # use `test`; COMMIT
DROP TABLE t1;
DROP TABLE t2;
mysql-test/suite/binlog/t/binlog_killed_simulate.test
View file @ f2a7af7b
......@@ -33,7 +33,7 @@ let $error_code= `select @a like "%#%error_code=0%" /* must return 1 */`;
eval select $error_code /* must return 1 as query completed before got killed*/;
# cleanup for the sub-case
system rm $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog;
remove_file $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog;
#
......@@ -61,7 +61,7 @@ let $error_code= `select @a like "%#%error_code=0%" /* must return 0*/`;
eval select $error_code /* must return 0 to mean the killed query is in */;
# cleanup for the sub-case
system rm $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog;
remove_file $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog;
drop table t1,t2;
......
mysql-test/suite/binlog/t/binlog_mix_innodb_stat.test 0 → 100644
View file @ f2a7af7b
# This is a wrapper for binlog.test so that the same test case can be used
# For both statement and row based bin logs 9/19/2005 [jbm]
-- source include/have_binlog_format_mixed.inc
-- source extra/binlog_tests/innodb_stat.test
mysql-test/suite/binlog/t/binlog_start_comment.test
View file @ f2a7af7b
......@@ -21,4 +21,4 @@ select * from t2;
# clean up
drop table t1,t2;
#--system rm $MYSQLTEST_VARDIR/tmp/binlog_start_comment.binlog
#--remove_file $MYSQLTEST_VARDIR/tmp/binlog_start_comment.binlog
mysql-test/suite/binlog/t/binlog_stm_innodb_stat.test
View file @ f2a7af7b
# This is a wrapper for binlog.test so that the same test case can be used
# For both statement and row based bin logs 9/19/2005 [jbm]
-- source include/have_binlog_format_mixed_or_statement.inc
-- source include/have_binlog_format_statement.inc
-- source extra/binlog_tests/innodb_stat.test
mysql-test/suite/binlog/t/binlog_stm_row.test 0 → 100644
View file @ f2a7af7b
--source include/have_log_bin.inc
--source include/have_binlog_format_row_or_statement.inc
# Get rid of previous tests binlog
--disable_query_log
reset master;
--enable_query_log
#
# Bug#34306: Can't make copy of log tables when server binary log is enabled
#
# This is an additional test for Bug#34306 in order to ensure that INSERT INTO
# .. SELECT FROM is properly replicated under SBR and RBR and that the proper
# read lock type are acquired.
#
--disable_warnings
DROP TABLE IF EXISTS t1;
DROP TABLE IF EXISTS t2;
--enable_warnings
SET GLOBAL BINLOG_FORMAT = STATEMENT;
SET SESSION BINLOG_FORMAT = STATEMENT;
CREATE TABLE t1 (a INT);
CREATE TABLE t2 LIKE t1;
select @@SESSION.BINLOG_FORMAT;
INSERT INTO t1 VALUES(1);
INSERT INTO t2 VALUES(2);
--connect(con1,localhost,root,,)
--connect(con2,localhost,root,,)
--echo #
--echo # Ensure that INSERT INTO .. SELECT FROM under SBR takes a read
--echo # lock that will prevent the source table from being modified.
--echo #
--connection con1
--echo # con1
SELECT GET_LOCK('Bug#34306', 120);
--connection con2
--echo # con2
PREPARE stmt FROM "INSERT INTO t1 SELECT * FROM t2 WHERE GET_LOCK('Bug#34306', 120)";
--send EXECUTE stmt;
--connection default
--echo # default
let $wait_condition=
SELECT COUNT(*) = 1 FROM information_schema.processlist WHERE
state = "User lock" AND
info = "INSERT INTO t1 SELECT * FROM t2 WHERE GET_LOCK('Bug#34306', 120)";
--source include/wait_condition.inc
--send INSERT INTO t2 VALUES (3);
--connection con1
--echo # con1
let $wait_condition=
SELECT COUNT(*) = 1 FROM information_schema.processlist WHERE
state = "Locked" and info = "INSERT INTO t2 VALUES (3)";
--source include/wait_condition.inc
SELECT RELEASE_LOCK('Bug#34306');
--connection con2
--echo # con2
--reap
SELECT RELEASE_LOCK('Bug#34306');
--connection default
--echo # default
--reap
--echo #
--echo # Ensure that INSERT INTO .. SELECT FROM prepared under SBR does
--echo # not prevent the source table from being modified if under RBR.
--echo #
--connection con2
--echo # con2
SET SESSION BINLOG_FORMAT = ROW;
--connection con1
--echo # con1
SELECT GET_LOCK('Bug#34306', 120);
--connection con2
--echo # con2
--send EXECUTE stmt;
--connection default
--echo # default
let $wait_condition=
SELECT COUNT(*) = 1 FROM information_schema.processlist WHERE
state = "User lock" AND
info = "INSERT INTO t1 SELECT * FROM t2 WHERE GET_LOCK('Bug#34306', 120)";
--source include/wait_condition.inc
--connection con1
--echo # con1
INSERT INTO t2 VALUES (4);
SELECT RELEASE_LOCK('Bug#34306');
--connection con2
--echo # con2
--reap
--disconnect con1
--disconnect con2
--connection default
--echo # default
--echo # Show binlog events
source include/show_binlog_events.inc;
DROP TABLE t1;
DROP TABLE t2;
mysql-test/suite/funcs_1/datadict/processlist_priv.inc
View file @ f2a7af7b
......@@ -16,7 +16,7 @@
# That means our SHOW PROCESSLIST can come too early. #
# Solution: #
# Close the connections at the end of the test. #
# Example2: #
# Example2 (2008-08-14 again observed): #
# 1. connection X: SHOW PROCESSLIST/GRANT ... etc. #
# 2. Switch to connection Y #
# 3. SHOW PROCESSLIST might present a record like #
......@@ -53,9 +53,11 @@
# WL#3982 Test information_schema.processlist #
# #
# Last update: #
# 2008-04-14 pcrews replace HOST to account for Windows' use of #
# localhost (host:<port> causing diffs on Windows #
# test runs #
# 2008-08-14 mleich Bug#38270 Test "processlist_priv_ps" fails on #
# varying "processlist" output #
# - Replace one sleep by a poll routines #
# - Remove or disable superfluous sleeps #
# #
########################################################################
# The following variables are used in "datadict_priv.inc" and here.
......@@ -87,15 +89,28 @@ USE information_schema;
--echo 1 Prepare test.
--echo connection default (user=root)
--echo ####################################################################################
if (`SELECT COUNT(*) <> 1 FROM processlist`)
{
--echo This test expects one connection to the server.
--echo Expectation: USER HOST DB COMMAND STATE INFO
--echo Expectation: root localhost information_schema Query executing SELECT USER,HOST,DB,COMMAND,STATE,INFO FROM processlist ORDER BY ID
--echo But we found in the moment:
SELECT USER,HOST,DB,COMMAND,STATE,INFO FROM processlist ORDER BY ID;
--echo Maybe
--echo - the base configuration (no of parallel auxiliary sessions) of the server has changed
--echo - a parallel test intended for another server accidently connected to our current one
--echo We cannot proceed in this situation. Abort
exit;
}
--echo ####################################################################################
--echo 1.1 Create two user
--echo ####################################################################################
# access to info tables as normal user
--disable_abort_on_error
--error 0, ER_CANNOT_USER
DROP USER ddicttestuser1@'localhost';
--error 0, ER_CANNOT_USER
DROP USER ddicttestuser2@'localhost';
--enable_abort_on_error
CREATE USER ddicttestuser1@'localhost';
CREATE USER ddicttestuser2@'localhost';
SET PASSWORD FOR ddicttestuser1@'localhost' = PASSWORD('ddictpass');
......@@ -112,6 +127,14 @@ connect (con100,localhost,ddicttestuser1,ddictpass,information_schema);
--echo SHOW/SELECT shows all processes/threads.
--echo ####################################################################################
connection default;
# Avoid Bug#38270 Test "processlist_priv_ps" fails on varying "processlist" output
# This subtest expects that the connection con100 is in state 'Sleep'.
# Poll till the connection con100 is in state COMMAND = 'Sleep'.
let $wait_timeout= 10;
let $wait_condition=
SELECT COUNT(*) = 1 FROM INFORMATION_SCHEMA.PROCESSLIST
WHERE DB = 'information_schema' AND COMMAND = 'Sleep' AND USER = 'ddicttestuser1';
--source include/wait_condition.inc
eval SHOW CREATE TABLE $table;
--replace_column 1 ID 3 HOST_NAME 6 TIME
eval SHOW $table;
......@@ -120,7 +143,6 @@ eval SELECT * FROM $table $select_where ORDER BY id;
--replace_column 1 ID 3 HOST_NAME 6 TIME
eval SELECT $columns FROM $table $select_where ORDER BY id;
--source suite/funcs_1/datadict/datadict_priv.inc
--real_sleep 0.3
--echo ####################################################################################
......@@ -128,6 +150,9 @@ eval SELECT $columns FROM $table $select_where ORDER BY id;
connection con100;
--echo SHOW/SELECT shows only the processes (1) of the user.
--echo ####################################################################################
# No need for poll routine here.
# The current state of the default session might depend on load of testing box
# but "ddicttestuser1" must not see anything of the root session.
eval SHOW CREATE TABLE $table;
--replace_column 1 ID 3 HOST_NAME 6 TIME
eval SHOW $table;
......@@ -219,7 +244,7 @@ SELECT * FROM information_schema.processlist;
--echo ####################################################################################
--echo 7 Revoke PROCESS privilege from anonymous user + disconnect ddicttestuser1
--echo 7 Revoke PROCESS privilege from anonymous user
--echo connection default (user=root)
--echo ####################################################################################
connection default;
......
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result
View file @ f2a7af7b
......@@ -7,9 +7,7 @@ connection default (user=root)
1.1 Create two user
####################################################################################
DROP USER ddicttestuser1@'localhost';
ERROR HY000: Operation DROP USER failed for 'ddicttestuser1'@'localhost'
DROP USER ddicttestuser2@'localhost';
ERROR HY000: Operation DROP USER failed for 'ddicttestuser2'@'localhost'
CREATE USER ddicttestuser1@'localhost';
CREATE USER ddicttestuser2@'localhost';
SET PASSWORD FOR ddicttestuser1@'localhost' = PASSWORD('ddictpass');
......@@ -240,7 +238,7 @@ ID ddicttestuser1 HOST_NAME information_schema Query TIME executing SELECT * FRO
ID ddicttestuser1 HOST_NAME information_schema Sleep TIME NULL
ID ddicttestuser1 HOST_NAME information_schema Sleep TIME NULL
####################################################################################
7 Revoke PROCESS privilege from anonymous user + disconnect ddicttestuser1
7 Revoke PROCESS privilege from anonymous user
connection default (user=root)
####################################################################################
REVOKE PROCESS ON *.* FROM ''@'localhost';
......
mysql-test/suite/funcs_1/r/processlist_priv_ps.result
View file @ f2a7af7b
......@@ -7,9 +7,7 @@ connection default (user=root)
1.1 Create two user
####################################################################################
DROP USER ddicttestuser1@'localhost';
ERROR HY000: Operation DROP USER failed for 'ddicttestuser1'@'localhost'
DROP USER ddicttestuser2@'localhost';
ERROR HY000: Operation DROP USER failed for 'ddicttestuser2'@'localhost'
CREATE USER ddicttestuser1@'localhost';
CREATE USER ddicttestuser2@'localhost';
SET PASSWORD FOR ddicttestuser1@'localhost' = PASSWORD('ddictpass');
......@@ -240,7 +238,7 @@ ID ddicttestuser1 HOST_NAME information_schema Execute TIME executing SELECT * F
ID ddicttestuser1 HOST_NAME information_schema Sleep TIME NULL
ID ddicttestuser1 HOST_NAME information_schema Sleep TIME NULL
####################################################################################
7 Revoke PROCESS privilege from anonymous user + disconnect ddicttestuser1
7 Revoke PROCESS privilege from anonymous user
connection default (user=root)
####################################################################################
REVOKE PROCESS ON *.* FROM ''@'localhost';
......
mysql-test/suite/ndb/r/ndb_alter_table.result
View file @ f2a7af7b
......@@ -354,16 +354,52 @@ select * from t1 where a = 12;
a b c
12 403 NULL
drop table t1;
create table t1 (a int not null, b varchar(10)) engine=ndb;
show index from t1;
Table Non_unique Key_name Seq_in_index Column_name Collation Cardinality Sub_part Packed Null Index_type Comment
create table t1(a int not null) engine=ndb;
$PK Bigunsigned PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY
PRIMARY KEY($PK) - UniqueHashIndex
insert into t1 values (1),(2),(3);
alter table t1 add primary key (a);
show index from t1;
Table Non_unique Key_name Seq_in_index Column_name Collation Cardinality Sub_part Packed Null Index_type Comment
t1 0 PRIMARY 1 a A 0 NULL NULL BTREE
a Int PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY
PRIMARY KEY(a) - UniqueHashIndex
PRIMARY(a) - OrderedIndex
update t1 set a = 17 where a = 1;
select * from t1 order by a;
a
2
3
17
alter table t1 drop primary key;
show index from t1;
Table Non_unique Key_name Seq_in_index Column_name Collation Cardinality Sub_part Packed Null Index_type Comment
$PK Bigunsigned PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY
PRIMARY KEY($PK) - UniqueHashIndex
update t1 set a = 1 where a = 17;
select * from t1 order by a;
a
1
2
3
drop table t1;
create table t1(a int not null) engine=ndb;
$PK Bigunsigned PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY
PRIMARY KEY($PK) - UniqueHashIndex
insert into t1 values (1),(2),(3);
create unique index pk on t1(a);
a Int PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY
PRIMARY KEY(a) - UniqueHashIndex
update t1 set a = 17 where a = 1;
select * from t1 order by a;
a
2
3
17
alter table t1 drop index pk;
$PK Bigunsigned PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY
PRIMARY KEY($PK) - UniqueHashIndex
update t1 set a = 1 where a = 17;
select * from t1 order by a;
a
1
2
3
drop table t1;
create table t1 (a int not null primary key, b int not null default 0, c varchar(254)) engine=ndb;
show create table t1;
......
mysql-test/suite/ndb/t/ndb_alter_table.test
View file @ f2a7af7b
......@@ -411,13 +411,32 @@ select * from t1 where a = 12;
drop table t1;
# some other ALTER combinations
# add/drop pk
create table t1 (a int not null, b varchar(10)) engine=ndb;
show index from t1;
# Check add/drop primary key (not supported on-line)
create table t1(a int not null) engine=ndb;
--exec $NDB_TOOLS_DIR/ndb_desc --no-defaults -d test t1 | grep PRIMARY
insert into t1 values (1),(2),(3);
alter table t1 add primary key (a);
show index from t1;
--exec $NDB_TOOLS_DIR/ndb_desc --no-defaults -d test t1 | grep PRIMARY
update t1 set a = 17 where a = 1;
select * from t1 order by a;
alter table t1 drop primary key;
show index from t1;
--exec $NDB_TOOLS_DIR/ndb_desc --no-defaults -d test t1 | grep PRIMARY
update t1 set a = 1 where a = 17;
select * from t1 order by a;
drop table t1;
# bug#31233 mysql_alter_table() fails to drop UNIQUE KEY
create table t1(a int not null) engine=ndb;
--exec $NDB_TOOLS_DIR/ndb_desc --no-defaults -d test t1 | grep PRIMARY
insert into t1 values (1),(2),(3);
create unique index pk on t1(a);
--exec $NDB_TOOLS_DIR/ndb_desc --no-defaults -d test t1 | grep PRIMARY
update t1 set a = 17 where a = 1;
select * from t1 order by a;
alter table t1 drop index pk;
--exec $NDB_TOOLS_DIR/ndb_desc --no-defaults -d test t1 | grep PRIMARY
update t1 set a = 1 where a = 17;
select * from t1 order by a;
drop table t1;
# alter .. alter
......
mysql-test/suite/ndb/t/ndb_restore_print.test
View file @ f2a7af7b
......@@ -134,10 +134,14 @@ insert into t4 values (1,31),(2,32),(3,33),(4,34),(5,35);
--let ndb_restore_filter=test t1
--source include/ndb_backup_print.inc
--exec rm -f $MYSQLTEST_VARDIR/tmp/t1.txt
--exec rm -f $MYSQLTEST_VARDIR/tmp/t2.txt
--exec rm -f $MYSQLTEST_VARDIR/tmp/t3.txt
--exec rm -f $MYSQLTEST_VARDIR/tmp/t4.txt
--error 0,1
--remove_file $MYSQLTEST_VARDIR/tmp/t1.txt
--error 0,1
--remove_file $MYSQLTEST_VARDIR/tmp/t2.txt
--error 0,1
--remove_file $MYSQLTEST_VARDIR/tmp/t3.txt
--error 0,1
--remove_file $MYSQLTEST_VARDIR/tmp/t4.txt
--let ndb_restore_opts=--verbose=0 --print_data --hex --tab $MYSQLTEST_VARDIR/tmp --append
--let ndb_restore_filter=test
......@@ -156,10 +160,10 @@ insert into t4 values (1,31),(2,32),(3,33),(4,34),(5,35);
--source include/show_msg.inc
--exec sort $MYSQLTEST_VARDIR/tmp/t4.txt
--exec rm -f $MYSQLTEST_VARDIR/tmp/t1.txt
--exec rm -f $MYSQLTEST_VARDIR/tmp/t2.txt
--exec rm -f $MYSQLTEST_VARDIR/tmp/t3.txt
--exec rm -f $MYSQLTEST_VARDIR/tmp/t4.txt
--remove_file $MYSQLTEST_VARDIR/tmp/t1.txt
--remove_file $MYSQLTEST_VARDIR/tmp/t2.txt
--remove_file $MYSQLTEST_VARDIR/tmp/t3.txt
--remove_file $MYSQLTEST_VARDIR/tmp/t4.txt
# now test some other datatypes
drop table t1;
......
mysql-test/suite/ndb_team/t/ndb_autodiscover.test
View file @ f2a7af7b
......@@ -113,7 +113,7 @@ flush tables;
# Remove the frm file from disk
--remove_file $MYSQLTEST_VARDIR/master-data/test/t3.frm
--error 1050
--error ER_TABLE_EXISTS_ERROR
create table t3(
id int not null primary key,
name char(20), a int, b float, c char(24)
......@@ -204,13 +204,13 @@ system exec $NDB_TOOLS_DIR/ndb_drop_table --no-defaults -d test t4 >> $NDB_TOOLS
#
# Test that correct error is returned
--error 1146
--error ER_NO_SUCH_TABLE
select * from t4;
--error 1146
--error ER_NO_SUCH_TABLE
select * from t4;
show status like 'handler_discover%';
--error 1051
--error ER_BAD_TABLE_ERROR
drop table t4;
create table t4(
......@@ -223,14 +223,14 @@ select * from t4;
# Remove the table from NDB
system exec $NDB_TOOLS_DIR/ndb_drop_table --no-defaults -d test t4 >> $NDB_TOOLS_OUTPUT ;
--error 1146
--error ER_NO_SUCH_TABLE
select * from t4;
drop table if exists t4;
# Test that dropping a table that does not exists
# on disk or in NDB gives same result as above
--error 1051
--error ER_BAD_TABLE_ERROR
drop table t5;
drop table if exists t5;
......@@ -257,7 +257,7 @@ system exec $NDB_TOOLS_DIR/ndb_drop_table --no-defaults -d test t4 >> $NDB_TOOLS
SHOW TABLES;
--error 1146
--error ER_NO_SUCH_TABLE
select * from t4;
#######################################################
......@@ -342,9 +342,9 @@ show status like 'handler_discover%';
# Check that t3 or t5 can't be created
# frm files for these tables is stilll on disk
--error 1050
--error ER_TABLE_EXISTS_ERROR
create table t3(a int);
--error 1050
--error ER_TABLE_EXISTS_ERROR
create table t5(a int);
SHOW TABLES LIKE 't%';
......@@ -462,7 +462,7 @@ show tables;
create database test2;
use test2;
show tables;
--error 1146
--error ER_NO_SUCH_TABLE
select * from t1;
create table t2 (b int,c longblob) engine=ndb;
use test;
......@@ -487,7 +487,7 @@ create table t1 (a int primary key) engine=ndb;
select * from t1;
--exec $NDB_MGM --no-defaults -e "all restart -n" > /dev/null
--exec $NDB_TOOLS_DIR/ndb_waiter --no-defaults --not-started > /dev/null
--error 1015
--error ER_CANT_LOCK
select * from t1;
--exec $NDB_MGM --no-defaults -e "all start" > /dev/null
--exec $NDB_TOOLS_DIR/ndb_waiter --no-defaults > /dev/null
......@@ -503,17 +503,17 @@ drop database test_only_ndb_tables;
# discovered( for example a table created via NDBAPI)
# Test disabled since it doesn't work on case insensitive systems
#--error 1050
#--error ER_TABLE_EXISTS_ERROR
#CREATE TABLE sys.SYSTAB_0 (a int);
#--error 1105
#--error ER_UNKNOWN_ERROR
#select * from sys.SYSTAB_0;
#CREATE TABLE IF NOT EXISTS sys.SYSTAB_0 (a int);
#show warnings;
#--error 1105
#--error ER_UNKNOWN_ERROR
#select * from sys.SYSTAB_0;
#--error 1051
#--error ER_BAD_TABLE_ERROR
#drop table sys.SYSTAB_0;
#drop table IF EXISTS sys.SYSTAB_0;
......
mysql-test/suite/parts/inc/partition_alter2.inc → mysql-test/suite/parts/inc/partition_alter2_1.inc
View file @ f2a7af7b
################################################################################
# inc/partition_alter2.inc #
# inc/partition_alter2_1.inc #
# #
# Purpose: #
# Tests where the columns used within the partitioning function are altered. #
# This routine is only useful for the partition_<feature>_<engine> tests. .#
# Part 1: increasing size of column
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
# Original Date: 2006-03-05 #
# Change Author: #
# Change Date: #
# Change: #
# Change Author: MattiasJ #
# Change Date: 2008-09-08 #
# Change: Splitted the test in two different parts (increasing/decreasing col) #
################################################################################
--echo
......@@ -140,133 +141,6 @@ let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
--echo
--echo #========================================================================
--echo # 2 Decrease the size of the column used in the partitioning
--echo # function and/or PRIMARY KEY and/or UNIQUE INDEX
--echo #========================================================================
--echo #------------------------------------------------------------------------
--echo # 2.1 ALTER column f_int2 not used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int2 MEDIUMINT;
--echo # 2.1.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
#
if ($do_pk_tests)
{
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
--echo # 2.1.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
#
--echo # 2.1.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx1 (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx1 (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx1 (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
#
if ($more_pk_ui_tests)
{
# The value of the tests 2.2 is maybe covered by the tests 2.3
--echo #------------------------------------------------------------------------
--echo # 2.2 ALTER column f_int1 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT;
--echo # 2.2.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.2.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.2.3 UNIQUE INDEX exists
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo #------------------------------------------------------------------------
--echo # 2.3 ALTER column f_int1 and f_int2 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: f_int1 and f_int2 is used within the partitioning function
# ---> inc/partition_alter_13.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT, MODIFY f_int2 MEDIUMINT;
--echo # 2.3.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.3.2 PRIMARY KEY exists
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.3.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if (0)
{
--echo
......
mysql-test/suite/parts/inc/partition_alter2_2.inc 0 → 100644
View file @ f2a7af7b
################################################################################
# inc/partition_alter2_2.inc #
# #
# Purpose: #
# Tests where the columns used within the partitioning function are altered. #
# This routine is only useful for the partition_<feature>_<engine> tests. .#
# Part 2: decreasing size of column
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
# Original Date: 2006-03-05 #
# Change Author: MattiasJ #
# Change Date: 2008-09-08 #
# Change: Splitted the test in two different parts (increasing/decreasing col) #
################################################################################
--echo
--echo #========================================================================
--echo # 2 Decrease the size of the column used in the partitioning
--echo # function and/or PRIMARY KEY and/or UNIQUE INDEX
--echo #========================================================================
--echo #------------------------------------------------------------------------
--echo # 2.1 ALTER column f_int2 not used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int2 MEDIUMINT;
--echo # 2.1.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
#
if ($do_pk_tests)
{
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
--echo # 2.1.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
#
--echo # 2.1.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx1 (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx1 (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx1 (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
#
if ($more_pk_ui_tests)
{
# The value of the tests 2.2 is maybe covered by the tests 2.3
--echo #------------------------------------------------------------------------
--echo # 2.2 ALTER column f_int1 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: Only f_int1 is used within the partitioning function
# ---> inc/partition_alter_11.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT;
--echo # 2.2.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.2.2 PRIMARY KEY exists
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.2.3 UNIQUE INDEX exists
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo #------------------------------------------------------------------------
--echo # 2.3 ALTER column f_int1 and f_int2 used in partitioning function
--echo #------------------------------------------------------------------------
# Rule: f_int1 and f_int2 is used within the partitioning function
# ---> inc/partition_alter_13.inc
let $alter= ALTER TABLE t1 MODIFY f_int1 MEDIUMINT, MODIFY f_int2 MEDIUMINT;
--echo # 2.3.1 no PRIMARY KEY or UNIQUE INDEX exists
let $unique= ;
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if ($do_pk_tests)
{
--echo # 2.3.2 PRIMARY KEY exists
# The value of the direct following test is maybe covered by the test with
# the PRIMARY KEY containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , PRIMARY KEY (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , PRIMARY KEY (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , PRIMARY KEY (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
}
#
--echo # 2.3.3 UNIQUE INDEX exists
# The value of the direct following test is maybe covered by the test with
# the UNIQUE INDEX containing two columns.
if ($more_pk_ui_tests)
{
let $unique= , UNIQUE INDEX uidx (f_int1);
--source suite/parts/inc/partition_alter_11.inc
}
let $unique= , UNIQUE INDEX uidx (f_int1,f_int2);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
let $unique= , UNIQUE INDEX uidx (f_int2,f_int1);
--source suite/parts/inc/partition_alter_11.inc
--source suite/parts/inc/partition_alter_13.inc
#
if (0)
{
--echo
--echo #========================================================================
--echo # 3 ALTER the type of the column used in the partitioning
--echo # function and/or PRIMARY KEY and/or UNIQUE INDEX
--echo # INTEGER --> FLOAT
--echo # INTEGER --> DECIMAL
--echo # INTEGER --> VARCHAR
--echo # mleich: I assume that at least the first two variants are of
--echo # some interest. But I am unsure if the server allows such
--echo # conversions. I also think that such operations have a
--echo # conversions very small likelihood.
--echo # To be implemented.
--echo #========================================================================
}
mysql-test/suite/parts/inc/partition_auto_increment.inc 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/parts/r/partition_alter2_1_myisam.result 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/parts/r/partition_alter2_2_myisam.result 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/parts/r/partition_auto_increment_ndb.result 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/parts/t/disabled.def
View file @ f2a7af7b
partition_alter2_ndb : Bug#18735 Not supported
partition_basic_ndb : Bug#19899 Crashing the server
# http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster-limitations-syntax.html
partition_bit_ndb : NDB does not support bit column in index
......
mysql-test/suite/parts/t/partition_alter2_innodb.test → mysql-test/suite/parts/t/partition_alter2_1_innodb.test
View file @ f2a7af7b
################################################################################
# t/partition_alter2_innodb.test #
# t/partition_alter2_1_innodb.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
......@@ -70,7 +70,7 @@ let $MAX_VALUE= (2147483646);
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2.inc
--source suite/parts/inc/partition_alter2_1.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
......
mysql-test/suite/parts/t/partition_alter2_myisam.test → mysql-test/suite/parts/t/partition_alter2_1_myisam.test
View file @ f2a7af7b
################################################################################
# t/partition_alter2_myisam.test #
# t/partition_alter2_1_myisam.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
......@@ -69,7 +69,7 @@ let $MAX_VALUE= (2147483646);
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2.inc
--source suite/parts/inc/partition_alter2_1.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
......
mysql-test/suite/parts/t/partition_alter2_ndb.test → mysql-test/suite/parts/t/partition_alter2_2_innodb.test
View file @ f2a7af7b
################################################################################
# t/partition_alter2_ndb.test #
# t/partition_alter2_2_innodb.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
# NDB branch #
# InnoDB branch #
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
......@@ -14,7 +14,7 @@
################################################################################
#
# NOTE: PLEASE DO NOT ADD NOT NDB SPECIFIC TESTCASES HERE !
# NOTE: PLEASE DO NOT ADD NOT INNODB SPECIFIC TESTCASES HERE !
# TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
# THE SOURCED FILES ONLY.
#
......@@ -40,35 +40,26 @@ SET @max_row = 20;
let $more_trigger_tests= 0;
let $more_pk_ui_tests= 0;
# The server must support partitioning. But NDB is partitioned from the start.
# Thats why the next line is set to comment.
# --source include/have_partition.inc
# The server must support partitioning.
--source include/have_partition.inc
#------------------------------------------------------------------------------#
# Engine specific settings and requirements
##### Storage engine to be tested
--source include/have_ndb.inc
let $engine= 'ndbcluster';
connection default;
# range, list and hash partitioning in ndb requires new_mode
--disable_query_log
set new=on;
--enable_query_log
--source include/have_innodb.inc
let $engine= 'InnoDB';
##### Execute the test of "table" files
# NDB has no files per PK, UI, ...
# InnoDB has no files per PK, UI, ...
let $do_file_tests= 0;
##### Execute PRIMARY KEY tests #####
# AFAIK NDB is always partitioned using the explicit defined PRIMARY KEY
# or uses an internal one.
# AFAIK InnoDB clusters the table around PRIMARY KEYs.
let $do_pk_tests= 1;
##### Assign a big number smaller than the maximum value for partitions #####
# and smaller than the maximum value of SIGNED INTEGER
# The NDB handler only supports 32 bit integers in VALUES
# 2147483647 seems to be too big.
let $MAX_VALUE= (2147483646);
# Generate the prerequisites ($variables, @variables, tables) needed
......@@ -79,7 +70,7 @@ let $MAX_VALUE= (2147483646);
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2.inc
--source suite/parts/inc/partition_alter2_2.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
......
mysql-test/suite/parts/t/partition_alter2_2_myisam.test 0 → 100644
View file @ f2a7af7b
################################################################################
# t/partition_alter2_2_myisam.test #
# #
# Purpose: #
# Tests around Alter column used in partitioning function #
# MyISAM branch #
# #
#------------------------------------------------------------------------------#
# Original Author: mleich #
# Original Date: 2006-03-05 #
# Change Author: #
# Change Date: #
# Change: #
################################################################################
#
# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
# TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
# THE SOURCED FILES ONLY.
#
# Please read the README at the end of inc/partition.pre before changing
# any of the variables.
#
#------------------------------------------------------------------------------#
# General not engine specific settings and requirements
##### Options, for debugging support #####
let $debug= 0;
let $with_partitioning= 1;
##### Option, for displaying files #####
let $ls= 1;
##### Number of rows for the INSERT/UPDATE/DELETE/SELECT experiments #####
# on partioned tables
SET @max_row = 20;
##### Execute more tests #####
let $more_trigger_tests= 0;
let $more_pk_ui_tests= 0;
# The server must support partitioning.
--source include/have_partition.inc
#------------------------------------------------------------------------------#
# Engine specific settings and requirements
##### Storage engine to be tested
let $engine= 'MyISAM';
##### Execute the test of "table" files
# MyISAM has files per PK, UI, ...
let $do_file_tests= 1;
##### Execute PRIMARY KEY tests #####
# AFAIK MyISAM treats PRIMARY KEYs like UNIQUE INDEXes
let $do_pk_tests= 0;
##### Assign a big number smaller than the maximum value for partitions #####
# and smaller than the maximum value of SIGNED INTEGER
let $MAX_VALUE= (2147483646);
# Generate the prerequisites ($variables, @variables, tables) needed
--source suite/parts/inc/partition.pre
##### Workarounds for known open engine specific bugs
# none
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_alter2_2.inc
#------------------------------------------------------------------------------#
# Execute storage engine specific tests
#------------------------------------------------------------------------------#
# Cleanup
--source suite/parts/inc/partition_cleanup.inc
mysql-test/suite/parts/t/partition_auto_increment_archive.test 0 → 100644
View file @ f2a7af7b
################################################################################
# t/partition_auto_increment_archive.test #
# #
# Purpose: #
# Tests around auto increment column #
# Archive branch #
# #
#------------------------------------------------------------------------------#
# Original Author: MattiasJ #
# Original Date: 2008-09-02 #
# Change Author: #
# Change Date: #
# Change: #
################################################################################
#
# NOTE: PLEASE DO NOT ADD NOT MYISAM SPECIFIC TESTCASES HERE !
# TESTCASES WHICH MUST BE APPLIED TO ALL STORAGE ENGINES MUST BE ADDED IN
# THE SOURCED FILES ONLY.
#
# The server must support partitioning.
--source include/have_partition.inc
#------------------------------------------------------------------------------#
# Engine specific settings and requirements
--source include/have_archive.inc
# Archve does not support delete
let $skip_delete= 1;
let $skip_truncate= 1;
let $skip_update= 1;
let $only_ai_pk= 1;
##### Storage engine to be tested
let $engine= 'Archive';
#------------------------------------------------------------------------------#
# Execute the tests to be applied to all storage engines
--source suite/parts/inc/partition_auto_increment.inc
mysql-test/suite/parts/t/partition_auto_increment_innodb.test 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/parts/t/partition_auto_increment_memory.test 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/parts/t/partition_auto_increment_myisam.test 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/parts/t/partition_auto_increment_ndb.test 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_row_log.result
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_sp.result
View file @ f2a7af7b
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_stm_log.result
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/auto_increment.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/compare.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/ctype_big5.test
View file @ f2a7af7b
......@@ -79,7 +79,8 @@ delete from t1;
--eval select hex(load_file('$MYSQLTEST_VARDIR/master-data/test/t1.txt'));
load data infile 't1.txt' into table t1;
select hex(a) from t1;
--exec rm $MYSQLTEST_VARDIR/master-data/test/t1.txt
--remove_file $MYSQLTEST_VARDIR/master-data/test/t1.txt
drop table t1;
--echo End of 5.0 tests
mysql-test/t/ctype_ucs.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/distinct.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/events_2.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/federated.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/loaddata.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/log_tables.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/mysqldump-max.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/mysqldump.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/outfile.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/partition_not_windows.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/partition_range.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/skip_log_bin-master.opt 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/skip_log_bin.test 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/sp-error.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/sp.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/symlink.test
View file @ f2a7af7b
This diff is collapsed.
mysql-test/t/user_var.test
View file @ f2a7af7b
This diff is collapsed.
mysys/stacktrace.c
View file @ f2a7af7b
This diff is collapsed.
scripts/make_binary_distribution.sh
View file @ f2a7af7b
This diff is collapsed.
scripts/mysql_install_db.sh
View file @ f2a7af7b
This diff is collapsed.
server-tools/instance-manager/mysqlmanager.vcproj deleted 100644 → 0
View file @ 690fd28a
This diff is collapsed.
sql/event_db_repository.cc
View file @ f2a7af7b
This diff is collapsed.
sql/event_parse_data.cc
View file @ f2a7af7b
This diff is collapsed.
sql/event_parse_data.h
View file @ f2a7af7b
This diff is collapsed.
sql/field.cc
View file @ f2a7af7b
This diff is collapsed.
sql/field.h
View file @ f2a7af7b
This diff is collapsed.
sql/ha_ndbcluster.cc
View file @ f2a7af7b
This diff is collapsed.
sql/ha_partition.cc
View file @ f2a7af7b
This diff is collapsed.
sql/ha_partition.h
View file @ f2a7af7b
This diff is collapsed.
sql/handler.h
View file @ f2a7af7b
This diff is collapsed.
sql/item.cc
View file @ f2a7af7b
This diff is collapsed.
sql/item_func.cc
View file @ f2a7af7b
This diff is collapsed.
sql/item_func.h
View file @ f2a7af7b
This diff is collapsed.
sql/lock.cc
View file @ f2a7af7b
This diff is collapsed.
sql/log_event.cc
View file @ f2a7af7b
This diff is collapsed.
sql/mysql_priv.h
View file @ f2a7af7b
This diff is collapsed.
sql/mysqld.cc
View file @ f2a7af7b
This diff is collapsed.
sql/parse_file.cc
View file @ f2a7af7b
This diff is collapsed.
sql/parse_file.h
View file @ f2a7af7b
This diff is collapsed.
sql/sp_head.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_base.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_cache.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_class.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_class.h
View file @ f2a7af7b
This diff is collapsed.
sql/sql_db.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_insert.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_lex.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_lex.h
View file @ f2a7af7b
This diff is collapsed.
sql/sql_load.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_parse.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_table.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_update.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_view.cc
View file @ f2a7af7b
This diff is collapsed.
sql/sql_yacc.yy
View file @ f2a7af7b
This diff is collapsed.
sql/table.h
View file @ f2a7af7b
This diff is collapsed.
support-files/mysql.spec.sh
View file @ f2a7af7b
This diff is collapsed.
win/build-vs9.bat 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
win/build-vs9_x64.bat 0 → 100644
View file @ f2a7af7b
This diff is collapsed.
win/create_manifest.js
View file @ f2a7af7b
This diff is collapsed.
zlib/gzio.c
View file @ f2a7af7b
This diff is collapsed.
zlib/zutil.h
View file @ f2a7af7b
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7