Skip to content

M
MariaDB
Commit fa5b4652 authored by Davi Arnaut's avatar Davi Arnaut
Browse files
Options

Bug#37780: Make KILL reliable (main.kill fails randomly) 

- A prerequisite cleanup patch for making KILL reliable.

The test case main.kill did not work reliably.

The following problems have been identified:

1. A kill signal could go lost if it came in, short before a
thread went reading on the client connection.

2. A kill signal could go lost if it came in, short before a
thread went waiting on a condition variable.

These problems have been solved as follows. Please see also
added code comments for more details.

1. There is no safe way to detect, when a thread enters the
blocking state of a read(2) or recv(2) system call, where it
can be interrupted by a signal. Hence it is not possible to
wait for the right moment to send a kill signal. It has been
decided, not to fix it in the code.  Instead, the test case
repeats the KILL statement until the connection terminates.

2. Before waiting on a condition variable, we register it
together with a synchronizating mutex in THD::mysys_var. After
this, we need to test THD::killed again. At some places we did
only test it in a loop condition before the registration. When
THD::killed had been set between this test and the registration,
we entered waiting without noticing the killed flag. Additional
checks ahve been introduced where required.

In addition to the above, a re-write of the main.kill test
case has been done. All sleeps have been replaced by Debug
Sync Facility synchronization. A couple of sync points have
been added to the server code.

To avoid further problems, if the test case fails in spite of
the fixes, the test case has been added to the "experimental"
list for now.

- Most of the work on this patch is authored by Ingo Struewing


mysql-test/t/kill.test:
  Re-wrote test case to use Debug Sync points instead of sleeps
sql/event_queue.cc:
  Fixed kill detection in Event_queue::cond_wait() by adding a check
  after enter_cond().
sql/lock.cc:
  Moved Debug Sync points behind enter_cond().
  Fixed comments.
sql/slave.cc:
  Fixed kill detection in start_slave_thread() by adding a check
  after enter_cond().
sql/sql_class.cc:
  Swapped order of kill and close in THD::awake().
  Added comments.
sql/sql_class.h:
  Added a comment to THD::killed.
sql/sql_parse.cc:
  Added a sync point in do_command().
sql/sql_select.cc:
  Added a sync point in JOIN::optimize().
parent 7af4cdc4
Expand all Show whitespace changes
Inline Side-by-side
Showing with 502 additions and 369 deletions
mysql-test/r/kill.result
View file @ fa5b4652
set @old_concurrent_insert= @@global.concurrent_insert; SET DEBUG_SYNC = 'RESET';
set @@global.concurrent_insert= 0; DROP TABLE IF EXISTS t1, t2, t3;
drop table if exists t1, t2, t3; DROP FUNCTION IF EXISTS MY_KILL;
create table t1 (kill_id int); CREATE FUNCTION MY_KILL(tid INT) RETURNS INT
insert into t1 values(connection_id()); BEGIN
select ((@id := kill_id) - kill_id) from t1; DECLARE CONTINUE HANDLER FOR SQLEXCEPTION BEGIN END;
((@id := kill_id) - kill_id) KILL tid;
0 RETURN (SELECT COUNT(*) = 0 FROM INFORMATION_SCHEMA.PROCESSLIST WHERE ID = tid);
kill @id; END|
select ((@id := kill_id) - kill_id) from t1; SET DEBUG_SYNC= 'thread_end SIGNAL con1_end';
((@id := kill_id) - kill_id) SET DEBUG_SYNC= 'before_do_command_net_read SIGNAL con1_read';
0 SET DEBUG_SYNC='now WAIT_FOR con1_read';
select @id != connection_id(); SET DEBUG_SYNC= 'now WAIT_FOR con1_end';
@id != connection_id() SET DEBUG_SYNC = 'RESET';
SELECT 1;
Got one of the listed errors
SELECT 1;
1
1 1
select 4; SELECT @id != CONNECTION_ID();
@id != CONNECTION_ID()
1
SELECT 4;
4 4
4 4
drop table t1; KILL (SELECT COUNT(*) FROM mysql.user);
kill (select count(*) from mysql.user);
ERROR 42000: This version of MySQL doesn't yet support 'Usage of subqueries or stored function calls as part of this statement' ERROR 42000: This version of MySQL doesn't yet support 'Usage of subqueries or stored function calls as part of this statement'
create table t1 (id int primary key); SET DEBUG_SYNC= 'thread_end SIGNAL con1_end';
create table t2 (id int unsigned not null); SET DEBUG_SYNC= 'before_do_command_net_read SIGNAL con1_read WAIT_FOR kill';
insert into t2 select id from t1; SET DEBUG_SYNC= 'now WAIT_FOR con1_read';
create table t3 (kill_id int); SET DEBUG_SYNC= 'now WAIT_FOR con1_end';
insert into t3 values(connection_id()); SET DEBUG_SYNC = 'RESET';
select id from t1 where id in (select distinct a.id from t2 a, t2 b, t2 c, t2 d group by a.id, b.id, c.id, d.id having a.id between 10 and 20); SELECT 1;
select ((@id := kill_id) - kill_id) from t3;
((@id := kill_id) - kill_id)
0
kill @id;
Got one of the listed errors Got one of the listed errors
drop table t1, t2, t3; SELECT 1;
select get_lock("a", 10); 1
get_lock("a", 10) 1
1 SELECT @id != CONNECTION_ID();
select get_lock("a", 10); @id != CONNECTION_ID()
get_lock("a", 10) 1
NULL SELECT 4;
select 1; 4
1 4
1 CREATE TABLE t1 (id INT PRIMARY KEY AUTO_INCREMENT);
select RELEASE_LOCK("a"); CREATE TABLE t2 (id INT UNSIGNED NOT NULL);
RELEASE_LOCK("a") INSERT INTO t1 VALUES
1 (0),(0),(0),(0),(0),(0),(0),(0), (0),(0),(0),(0),(0),(0),(0),(0),
create table t1(f1 int); (0),(0),(0),(0),(0),(0),(0),(0), (0),(0),(0),(0),(0),(0),(0),(0),
create function bug27563() returns int(11) (0),(0),(0),(0),(0),(0),(0),(0), (0),(0),(0),(0),(0),(0),(0),(0),
deterministic (0),(0),(0),(0),(0),(0),(0),(0), (0),(0),(0),(0),(0),(0),(0),(0);
begin INSERT t1 SELECT 0 FROM t1 AS a1, t1 AS a2 LIMIT 4032;
declare continue handler for sqlstate '70100' set @a:= 'killed'; INSERT INTO t2 SELECT id FROM t1;
declare continue handler for sqlexception set @a:= 'exception'; SET DEBUG_SYNC= 'thread_end SIGNAL con1_end';
set @a= get_lock("lock27563", 10); SET DEBUG_SYNC= 'before_acos_function SIGNAL in_sync';
return 1; SELECT id FROM t1 WHERE id IN
end| (SELECT DISTINCT a.id FROM t2 a, t2 b, t2 c, t2 d
select get_lock("lock27563",10); GROUP BY ACOS(1/a.id), b.id, c.id, d.id
get_lock("lock27563",10) HAVING a.id BETWEEN 10 AND 20);
1 SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
insert into t1 values (bug27563()); KILL @id;
ERROR 70100: Query execution was interrupted SET DEBUG_SYNC= 'now WAIT_FOR con1_end';
select @a; Got one of the listed errors
@a SELECT 1;
NULL 1
select * from t1; 1
SET DEBUG_SYNC = 'RESET';
DROP TABLE t1, t2;
SET DEBUG_SYNC= 'before_acos_function SIGNAL in_sync WAIT_FOR kill';
SELECT ACOS(0);
SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
KILL QUERY @id;
ACOS(0)
1.5707963267948966
SELECT 1;
1
1
SELECT @id = CONNECTION_ID();
@id = CONNECTION_ID()
1
SET DEBUG_SYNC = 'RESET';
CREATE TABLE t1 (f1 INT);
CREATE FUNCTION bug27563() RETURNS INT(11)
DETERMINISTIC
BEGIN
DECLARE CONTINUE HANDLER FOR SQLSTATE '70100' SET @a:= 'killed';
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION SET @a:= 'exception';
SET DEBUG_SYNC= 'now SIGNAL in_sync WAIT_FOR kill';
RETURN 1;
END|
INSERT INTO t1 VALUES (bug27563());
SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
KILL QUERY @id;
ERROR 70100: Query execution was interrupted
SELECT * FROM t1;
f1 f1
insert into t1 values(0); SET DEBUG_SYNC = 'RESET';
update t1 set f1= bug27563(); INSERT INTO t1 VALUES(0);
UPDATE t1 SET f1= bug27563();
SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
KILL QUERY @id;
ERROR 70100: Query execution was interrupted ERROR 70100: Query execution was interrupted
select @a; SELECT * FROM t1;
@a
NULL
select * from t1;
f1 f1
0 0
insert into t1 values(1); SET DEBUG_SYNC = 'RESET';
delete from t1 where bug27563() is null; INSERT INTO t1 VALUES(1);
DELETE FROM t1 WHERE bug27563() IS NULL;
SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
KILL QUERY @id;
ERROR 70100: Query execution was interrupted ERROR 70100: Query execution was interrupted
select @a; SELECT * FROM t1;
@a
NULL
select * from t1;
f1 f1
0 0
1 1
select * from t1 where f1= bug27563(); SET DEBUG_SYNC = 'RESET';
ERROR 70100: Query execution was interrupted SELECT * FROM t1 WHERE f1= bug27563();
select @a; SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
@a KILL QUERY @id;
NULL ERROR 70100: Query execution was interrupted
create procedure proc27563() SELECT * FROM t1;
begin
declare continue handler for sqlstate '70100' set @a:= 'killed';
declare continue handler for sqlexception set @a:= 'exception';
select get_lock("lock27563",10);
select "shouldn't be selected";
end|
call proc27563();
get_lock("lock27563",10)
NULL
ERROR 70100: Query execution was interrupted
select @a;
@a
NULL
create table t2 (f2 int);
create trigger trg27563 before insert on t1 for each row
begin
declare continue handler for sqlstate '70100' set @a:= 'killed';
declare continue handler for sqlexception set @a:= 'exception';
set @a:= get_lock("lock27563",10);
insert into t2 values(1);
end|
insert into t1 values(2),(3);
ERROR 70100: Query execution was interrupted
select @a;
@a
NULL
select * from t1;
f1 f1
0 0
1 1
select * from t2; SET DEBUG_SYNC = 'RESET';
f2 DROP FUNCTION bug27563;
select release_lock("lock27563"); CREATE TABLE t2 (f2 INT);
release_lock("lock27563") CREATE TRIGGER trg27563 BEFORE INSERT ON t1 FOR EACH ROW
BEGIN
DECLARE CONTINUE HANDLER FOR SQLSTATE '70100' SET @a:= 'killed';
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION SET @a:= 'exception';
INSERT INTO t2 VALUES(0);
SET DEBUG_SYNC= 'now SIGNAL in_sync WAIT_FOR kill';
INSERT INTO t2 VALUES(1);
END|
INSERT INTO t1 VALUES(2),(3);
SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
KILL QUERY @id;
ERROR 70100: Query execution was interrupted
SELECT * FROM t1;
f1
0
1 1
drop table t1, t2; SELECT * FROM t2;
drop function bug27563; f2
drop procedure proc27563; 0
SET DEBUG_SYNC = 'RESET';
DROP TABLE t1, t2;
SET DEBUG_SYNC= 'before_join_optimize SIGNAL in_sync';
PREPARE stmt FROM 'EXPLAIN SELECT * FROM t1,t2,t3,t4,t5,t6,t7,t8,t9,t10,t11,t12,t13,t14,t15,t16,t17,t18,t19,t20,t21,t22,t23,t24,t25,t26,t27,t28,t29,t30,t31,t32,t33,t34,t35,t36,t37,t38,t39,t40 WHERE a1=a2 AND a2=a3 AND a3=a4 AND a4=a5 AND a5=a6 AND a6=a7 AND a7=a8 AND a8=a9 AND a9=a10 AND a10=a11 AND a11=a12 AND a12=a13 AND a13=a14 AND a14=a15 AND a15=a16 AND a16=a17 AND a17=a18 AND a18=a19 AND a19=a20 AND a20=a21 AND a21=a22 AND a22=a23 AND a23=a24 AND a24=a25 AND a25=a26 AND a26=a27 AND a27=a28 AND a28=a29 AND a29=a30 AND a30=a31 AND a31=a32 AND a32=a33 AND a33=a34 AND a34=a35 AND a35=a36 AND a36=a37 AND a37=a38 AND a38=a39 AND a39=a40 '; PREPARE stmt FROM 'EXPLAIN SELECT * FROM t1,t2,t3,t4,t5,t6,t7,t8,t9,t10,t11,t12,t13,t14,t15,t16,t17,t18,t19,t20,t21,t22,t23,t24,t25,t26,t27,t28,t29,t30,t31,t32,t33,t34,t35,t36,t37,t38,t39,t40 WHERE a1=a2 AND a2=a3 AND a3=a4 AND a4=a5 AND a5=a6 AND a6=a7 AND a7=a8 AND a8=a9 AND a9=a10 AND a10=a11 AND a11=a12 AND a12=a13 AND a13=a14 AND a14=a15 AND a15=a16 AND a16=a17 AND a17=a18 AND a18=a19 AND a19=a20 AND a20=a21 AND a21=a22 AND a22=a23 AND a23=a24 AND a24=a25 AND a25=a26 AND a26=a27 AND a27=a28 AND a28=a29 AND a29=a30 AND a30=a31 AND a31=a32 AND a32=a33 AND a33=a34 AND a34=a35 AND a35=a36 AND a36=a37 AND a37=a38 AND a38=a39 AND a39=a40 ';
EXECUTE stmt; EXECUTE stmt;
SET DEBUG_SYNC= 'now WAIT_FOR in_sync';
KILL QUERY @id;
ERROR 70100: Query execution was interrupted
SET DEBUG_SYNC = 'RESET';
# #
# Bug#19723: kill of active connection yields different error code # Bug#19723: kill of active connection yields different error code
# depending on platform. # depending on platform.
# #
# Connection: con2. # Connection: con1.
KILL CONNECTION_ID(); SET DEBUG_SYNC= 'thread_end SIGNAL con1_end';
# CR_SERVER_LOST, CR_SERVER_GONE_ERROR, depending on the timing KILL @id;
# of close of the connection socket ERROR 70100: Query execution was interrupted
SET DEBUG_SYNC= 'now WAIT_FOR con1_end';
# ER_SERVER_SHUTDOWN, CR_SERVER_GONE_ERROR, CR_SERVER_LOST,
# depending on the timing of close of the connection socket
SELECT 1; SELECT 1;
Got one of the listed errors Got one of the listed errors
SELECT 1;
1
1
SELECT @id != CONNECTION_ID();
@id != CONNECTION_ID()
1
SET DEBUG_SYNC = 'RESET';
# #
# Additional test for WL#3726 "DDL locking for all metadata objects" # Additional test for WL#3726 "DDL locking for all metadata objects"
# Check that DDL and DML statements waiting for metadata locks can # Check that DDL and DML statements waiting for metadata locks can
...@@ -208,13 +243,11 @@ ERROR 70100: Query execution was interrupted ...@@ -208,13 +243,11 @@ ERROR 70100: Query execution was interrupted
# Test for DML waiting for meta-data lock # Test for DML waiting for meta-data lock
# Switching to connection 'blocker' # Switching to connection 'blocker'
unlock tables; unlock tables;
drop table t2;
create table t2 (k int);
lock tables t1 read; lock tables t1 read;
# Switching to connection 'ddl' # Switching to connection 'ddl'
rename tables t1 to t3, t2 to t1; truncate table t1;
# Switching to connection 'dml' # Switching to connection 'dml'
insert into t2 values (1); insert into t1 values (1);
# Switching to connection 'default' # Switching to connection 'default'
kill query ID2; kill query ID2;
# Switching to connection 'dml' # Switching to connection 'dml'
...@@ -239,6 +272,7 @@ unlock tables; ...@@ -239,6 +272,7 @@ unlock tables;
# Switching to connection 'ddl' # Switching to connection 'ddl'
# Cleanup. # Cleanup.
# Switching to connection 'default' # Switching to connection 'default'
drop table t3;
drop table t1; drop table t1;
set @@global.concurrent_insert= @old_concurrent_insert; drop table t2;
SET DEBUG_SYNC = 'RESET';
DROP FUNCTION MY_KILL;
mysql-test/t/disabled.def
View file @ fa5b4652
...@@ -9,7 +9,6 @@ ...@@ -9,7 +9,6 @@
# Do not use any TAB characters for whitespace. # Do not use any TAB characters for whitespace.
# #
############################################################################## ##############################################################################
kill : Bug#37780 2008-12-03 HHunger need some changes to be robust enough for pushbuild.
lowercase_table3 : Bug#54845 2010-06-30 alik main.lowercase_table3 on Mac OSX lowercase_table3 : Bug#54845 2010-06-30 alik main.lowercase_table3 on Mac OSX
mysqlhotcopy_myisam : Bug#54129 2010-08-31 alik mysqlhotcopy* fails mysqlhotcopy_myisam : Bug#54129 2010-08-31 alik mysqlhotcopy* fails
mysqlhotcopy_archive : Bug#54129 2010-08-31 alik mysqlhotcopy* fails mysqlhotcopy_archive : Bug#54129 2010-08-31 alik mysqlhotcopy* fails
......
mysql-test/t/kill.test
View file @ fa5b4652
This diff is collapsed.
sql/event_queue.cc
View file @ fa5b4652
...@@ -741,11 +741,13 @@ Event_queue::cond_wait(THD *thd, struct timespec *abstime, const char* msg, ...@@ -741,11 +741,13 @@ Event_queue::cond_wait(THD *thd, struct timespec *abstime, const char* msg,
thd->enter_cond(&COND_queue_state, &LOCK_event_queue, msg); thd->enter_cond(&COND_queue_state, &LOCK_event_queue, msg);
DBUG_PRINT("info", ("mysql_cond_%swait", abstime? "timed":"")); if (!thd->killed)
{
if (!abstime) if (!abstime)
mysql_cond_wait(&COND_queue_state, &LOCK_event_queue); mysql_cond_wait(&COND_queue_state, &LOCK_event_queue);
else else
mysql_cond_timedwait(&COND_queue_state, &LOCK_event_queue, abstime); mysql_cond_timedwait(&COND_queue_state, &LOCK_event_queue, abstime);
}
mutex_last_locked_in_func= func; mutex_last_locked_in_func= func;
mutex_last_locked_at_line= line; mutex_last_locked_at_line= line;
......
sql/lock.cc
View file @ fa5b4652
...@@ -989,6 +989,14 @@ bool Global_read_lock::lock_global_read_lock(THD *thd) ...@@ -989,6 +989,14 @@ bool Global_read_lock::lock_global_read_lock(THD *thd)
const char *new_message= "Waiting to get readlock"; const char *new_message= "Waiting to get readlock";
(void) mysql_mutex_lock(&LOCK_global_read_lock); (void) mysql_mutex_lock(&LOCK_global_read_lock);
old_message= thd->enter_cond(&COND_global_read_lock,
&LOCK_global_read_lock, new_message);
DBUG_PRINT("info",
("waiting_for: %d protect_against: %d",
waiting_for_read_lock, protect_against_global_read_lock));
waiting_for_read_lock++;
#if defined(ENABLED_DEBUG_SYNC) #if defined(ENABLED_DEBUG_SYNC)
/* /*
The below sync point fires if we have to wait for The below sync point fires if we have to wait for
...@@ -997,27 +1005,18 @@ bool Global_read_lock::lock_global_read_lock(THD *thd) ...@@ -997,27 +1005,18 @@ bool Global_read_lock::lock_global_read_lock(THD *thd)
WARNING: Beware to use WAIT_FOR with this sync point. We hold WARNING: Beware to use WAIT_FOR with this sync point. We hold
LOCK_global_read_lock here. LOCK_global_read_lock here.
Call the sync point before calling enter_cond() as it does use The sync point is after enter_cond() so that proc_info is
enter_cond() and exit_cond() itself if a WAIT_FOR action is available immediately after the sync point sends a SIGNAL. This
executed in spite of the above warning. can make tests more reliable.
Pre-set proc_info so that it is available immediately after the The sync point is before the loop so that it is executed only once.
sync point sends a SIGNAL. This makes tests more reliable.
*/ */
if (protect_against_global_read_lock) if (protect_against_global_read_lock && !thd->killed)
{ {
thd_proc_info(thd, new_message);
DEBUG_SYNC(thd, "wait_lock_global_read_lock"); DEBUG_SYNC(thd, "wait_lock_global_read_lock");
} }
#endif /* defined(ENABLED_DEBUG_SYNC) */ #endif /* defined(ENABLED_DEBUG_SYNC) */
old_message=thd->enter_cond(&COND_global_read_lock, &LOCK_global_read_lock,
new_message);
DBUG_PRINT("info",
("waiting_for: %d protect_against: %d",
waiting_for_read_lock, protect_against_global_read_lock));
waiting_for_read_lock++;
while (protect_against_global_read_lock && !thd->killed) while (protect_against_global_read_lock && !thd->killed)
mysql_cond_wait(&COND_global_read_lock, &LOCK_global_read_lock); mysql_cond_wait(&COND_global_read_lock, &LOCK_global_read_lock);
waiting_for_read_lock--; waiting_for_read_lock--;
......
sql/slave.cc
View file @ fa5b4652
...@@ -721,8 +721,16 @@ int start_slave_thread( ...@@ -721,8 +721,16 @@ int start_slave_thread(
while (start_id == *slave_run_id) while (start_id == *slave_run_id)
{ {
DBUG_PRINT("sleep",("Waiting for slave thread to start")); DBUG_PRINT("sleep",("Waiting for slave thread to start"));
const char* old_msg = thd->enter_cond(start_cond,cond_lock, const char *old_msg= thd->enter_cond(start_cond, cond_lock,
"Waiting for slave thread to start"); "Waiting for slave thread to start");
/*
It is not sufficient to test this at loop bottom. We must test
it after registering the mutex in enter_cond(). If the kill
happens after testing of thd->killed and before the mutex is
registered, we could otherwise go waiting though thd->killed is
set.
*/
if (!thd->killed)
mysql_cond_wait(start_cond, cond_lock); mysql_cond_wait(start_cond, cond_lock);
thd->exit_cond(old_msg); thd->exit_cond(old_msg);
mysql_mutex_lock(cond_lock); // re-acquire it as exit_cond() released mysql_mutex_lock(cond_lock); // re-acquire it as exit_cond() released
......
sql/sql_class.cc
View file @ fa5b4652
...@@ -1179,36 +1179,70 @@ void add_diff_to_status(STATUS_VAR *to_var, STATUS_VAR *from_var, ...@@ -1179,36 +1179,70 @@ void add_diff_to_status(STATUS_VAR *to_var, STATUS_VAR *from_var,
} }
/**
Awake a thread.
@param[in] state_to_set value for THD::killed
This is normally called from another thread's THD object.
@note Do always call this while holding LOCK_thd_data.
*/
void THD::awake(THD::killed_state state_to_set) void THD::awake(THD::killed_state state_to_set)
{ {
DBUG_ENTER("THD::awake"); DBUG_ENTER("THD::awake");
DBUG_PRINT("enter", ("this: 0x%lx", (long) this)); DBUG_PRINT("enter", ("this: %p current_thd: %p", this, current_thd));
THD_CHECK_SENTRY(this); THD_CHECK_SENTRY(this);
mysql_mutex_assert_owner(&LOCK_thd_data); mysql_mutex_assert_owner(&LOCK_thd_data);
/* Set the 'killed' flag of 'this', which is the target THD object. */
killed= state_to_set; killed= state_to_set;
if (state_to_set != THD::KILL_QUERY) if (state_to_set != THD::KILL_QUERY)
{ {
thr_alarm_kill(thread_id);
if (!slave_thread)
MYSQL_CALLBACK(thread_scheduler, post_kill_notification, (this));
#ifdef SIGNAL_WITH_VIO_CLOSE #ifdef SIGNAL_WITH_VIO_CLOSE
if (this != current_thd) if (this != current_thd)
{ {
/* /*
In addition to a signal, let's close the socket of the thread that Before sending a signal, let's close the socket of the thread
is being killed. This is to make sure it does not block if the that is being killed ("this", which is not the current thread).
signal is lost. This needs to be done only on platforms where This is to make sure it does not block if the signal is lost.
signals are not a reliable interruption mechanism. This needs to be done only on platforms where signals are not
a reliable interruption mechanism.
If we're killing ourselves, we know that we're not blocked, so this
hack is not used. Note that the downside of this mechanism is that we could close
the connection while "this" target thread is in the middle of
sending a result to the application, thus violating the client-
server protocol.
On the other hand, without closing the socket we have a race
condition. If "this" target thread passes the check of
thd->killed, and then the current thread runs through
THD::awake(), sets the 'killed' flag and completes the
signaling, and then the target thread runs into read(), it will
block on the socket. As a result of the discussions around
Bug#37780, it has been decided that we accept the race
condition. A second KILL awakes the target from read().
If we are killing ourselves, we know that we are not blocked.
We also know that we will check thd->killed before we go for
reading the next statement.
*/ */
close_active_vio(); close_active_vio();
} }
#endif #endif
/* Mark the target thread's alarm request expired, and signal alarm. */
thr_alarm_kill(thread_id);
/* Send an event to the scheduler that a thread should be killed. */
if (!slave_thread)
MYSQL_CALLBACK(thread_scheduler, post_kill_notification, (this));
} }
/* Broadcast a condition to kick the target if it is waiting on it. */
if (mysys_var) if (mysys_var)
{ {
mysql_mutex_lock(&mysys_var->mutex); mysql_mutex_lock(&mysys_var->mutex);
...@@ -1232,6 +1266,11 @@ void THD::awake(THD::killed_state state_to_set) ...@@ -1232,6 +1266,11 @@ void THD::awake(THD::killed_state state_to_set)
we issue a second KILL or the status it's waiting for happens). we issue a second KILL or the status it's waiting for happens).
It's true that we have set its thd->killed but it may not It's true that we have set its thd->killed but it may not
see it immediately and so may have time to reach the cond_wait(). see it immediately and so may have time to reach the cond_wait().
However, where possible, we test for killed once again after
enter_cond(). This should make the signaling as safe as possible.
However, there is still a small chance of failure on platforms with
instruction or memory write reordering.
*/ */
if (mysys_var->current_cond && mysys_var->current_mutex) if (mysys_var->current_cond && mysys_var->current_mutex)
{ {
......
sql/sql_class.h
View file @ fa5b4652
...@@ -1953,6 +1953,12 @@ class THD :public Statement, ...@@ -1953,6 +1953,12 @@ class THD :public Statement,
DYNAMIC_ARRAY user_var_events; /* For user variables replication */ DYNAMIC_ARRAY user_var_events; /* For user variables replication */
MEM_ROOT *user_var_events_alloc; /* Allocate above array elements here */ MEM_ROOT *user_var_events_alloc; /* Allocate above array elements here */
/*
If checking this in conjunction with a wait condition, please
include a check after enter_cond() if you want to avoid a race
condition. For details see the implementation of awake(),
especially the "broadcast" part.
*/
enum killed_state enum killed_state
{ {
NOT_KILLED=0, NOT_KILLED=0,
......
sql/sql_parse.cc
View file @ fa5b4652
...@@ -712,6 +712,22 @@ bool do_command(THD *thd) ...@@ -712,6 +712,22 @@ bool do_command(THD *thd)
net_new_transaction(net); net_new_transaction(net);
/*
Synchronization point for testing of KILL_CONNECTION.
This sync point can wait here, to simulate slow code execution
between the last test of thd->killed and blocking in read().
The goal of this test is to verify that a connection does not
hang, if it is killed at this point of execution.
(Bug#37780 - main.kill fails randomly)
Note that the sync point wait itself will be terminated by a
kill. In this case it consumes a condition broadcast, but does
not change anything else. The consumed broadcast should not
matter here, because the read/recv() below doesn't use it.
*/
DEBUG_SYNC(thd, "before_do_command_net_read");
if ((packet_length= my_net_read(net)) == packet_error) if ((packet_length= my_net_read(net)) == packet_error)
{ {
DBUG_PRINT("info",("Got error %d reading command from socket %s", DBUG_PRINT("info",("Got error %d reading command from socket %s",
......
sql/sql_select.cc
View file @ fa5b4652
...@@ -47,6 +47,7 @@ ...@@ -47,6 +47,7 @@
#include "records.h" // init_read_record, end_read_record #include "records.h" // init_read_record, end_read_record
#include "filesort.h" // filesort_free_buffers #include "filesort.h" // filesort_free_buffers
#include "sql_union.h" // mysql_union #include "sql_union.h" // mysql_union
#include "debug_sync.h" // DEBUG_SYNC
#include <m_ctype.h> #include <m_ctype.h>
#include <my_bit.h> #include <my_bit.h>
#include <hash.h> #include <hash.h>
...@@ -852,6 +853,7 @@ JOIN::optimize() ...@@ -852,6 +853,7 @@ JOIN::optimize()
if (optimized) if (optimized)
DBUG_RETURN(0); DBUG_RETURN(0);
optimized= 1; optimized= 1;
DEBUG_SYNC(thd, "before_join_optimize");
thd_proc_info(thd, "optimizing"); thd_proc_info(thd, "optimizing");
row_limit= ((select_distinct || order || group_list) ? HA_POS_ERROR : row_limit= ((select_distinct || order || group_list) ? HA_POS_ERROR :
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7