FIXME: Part of the MDEV-20699 test is disabled due to
nonderterministic result.

Normally we disable caching of routines in "SHOW CREATE".
Introduce an exception, if debug_dbug="+d,cache_sp_in_show_create".
lock_sync.test needs a way to populate the cache without side effects,
or else it runs into debug_sync timeouts.

So, this possibility to cache will be remain only for very special tests.

Occasionally, after restart, additional transactions will have been
executed, possibly related to innodb_stats_auto_recalc.

We should only care that the transaction ID sequence does
not go backwards.

Apparently, slow shutdown is not necessary anymore after MDEV-15912 fix

Let us mask the actual values of the defragmentation-related fields,
because they may vary. Also, remove the dependency on purge,
and instead delete records by a ROLLBACK of INSERT.

The reason for this behavior is that SP get cached, per connection.
The stored_program_cache is size of this cache, which amounts to 256
routines by default. A compiled stored procedure can easily be several
megabytes in size. Thus calling SHOW CREATE PROCEDURE for all stored
procedures, like mysqldump does, can require significant amount of memory.

Fixed by bypassing the cache for "SHOW CREATE". This should normally be
fine also perfomance-wise, as cache is meant to be used for repeated
execution, not repeated SHOW CREATEs.

Added a test to verify that CREATE PROCEDURE + SHOW CREATE PROCEURE do not
cache, i.e amount of allocated memory does not change.

Note, there is a change in existing behavior in an edge case :
If "SHOW CREATE PROCEDURE p1" called from p1, after p1 was altered, now
this will now return altered code. Previour behavior - relied on caching
and would return old code. The previous behavior might was not necessarily
correct.

MDEV-21613 : galera_sr.GCF-1018B MTR failed: Failed to open table mysql.wsrep_streaming_log for writing

Query can be bf aborted already earlier and then we should not
even try to open table.

Add wait_condition to wait until all nodes are in cluster

Use in_sum_func (and so nest_level) only in LEX to which SELECT lex belong to

Reduce usage of current_select (because it does not always point on the correct
 SELECT_LEX, for example with prepare.

Change context for all classes inherited from Item_ident (was only for Item_field) in case of pushing down it to HAVING.

Now name resolution context have to have SELECT_LEX reference if the context is present.

Fixed feedback plugin stack usage.

Revert 88a4be75 and
9d97f92f, which had been
prematurely pushed by accident.

last commit  8221708e removed too much,
mtr is failing

Create minidump when server fails to shutdown. If process is being
debugged, cause a debug break.

Moves some code which is part of safe_kill into mysys, as both safe_kill,
and mysqltest produce minidumps on different timeouts.

Small cleanup in wait_until_dead() - replace inefficient loop with a single
wait.

Fixed flaws with overly strict or, conversely,
overly soft verification of certificates in some
scenarios:

1. Removed the check that the 'commonname' (CN) in the
   certificate matches the 'localhost' value on the side
   of the joiner node, which was performed earlier, even
   if the address was received by the script only as an
   argument (out of the exchange via the Galera protocol) -
   since for the joining node this argument always contains
   its own local address, not the address of the remote host,
   so it is always treated as 'localhost', which is not
   necessarily true (outside of mtr testing);
2. Removed checking the domain name or IP-address of the
   peer node in the encrypt=2 mode;
3. Fixed checking of compliance of certificates when
   rsync SST is used;
4. Added the ability to specify CA not only as a file,
   but also as a path to the directory where the certificates
   are stored. To do this, the user just needs to specify the
   path to this directory as the value ssl-ca or tca parameter,
   ending with the '/' character.

trx_rseg_header_create(): Add a parameter for the value that is
to be written to TRX_RSEG_MAX_TRX_ID. If we omit this write, then
the updated test innodb.undo_truncate will fail for the 4k, 8k, 16k
page sizes. This was broken ever since
commit 947efe17 (MDEV-15158)
removed the writes of transaction identifiers to the TRX_SYS page.

srv_do_purge(): Truncate undo tablespaces also during slow shutdown
(innodb_fast_shutdown=0).

Thanks to Krunal Bauskar for noticing this problem.

RedHat systems have both files for lsb and init functions.
Old code was written as if/else, so second file (RedHat-specific) was not processed.
So, systemd redirect didn't work, because its logic is described in
RedHat-specific functions file

This reverts commit 30dea459.

This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.

In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.

TOI replication is used, in this approach,  purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.

This patch also fixes mutex locking order and unprotected
THD member accesses on bf aborting case. We try to hold
THD::LOCK_thd_data during bf aborting. Only case where it
is not possible is at wsrep_abort_transaction before
call wsrep_innobase_kill_one_trx where we take InnoDB
mutexes first and then THD::LOCK_thd_data.

This will also fix possible race condition during
close_connection and while wsrep is disconnecting
connections.

Added wsrep_bf_kill_debug test case
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>

Revert "MDEV-24873 galera.galera_as_slave_ctas MTR failed:..."

This reverts commit 29bbcac0 and
later commit 5ecaf52d.

trx_purge_truncate_history(): Do not force a write of the undo tablespace
that is being truncated. Instead, prevent page writes by acquiring
an exclusive latch on all dirty pages of the tablespace.

fseg_create(): Relax an assertion that could fail if a dirty undo page
is being initialized during undo tablespace truncation (and
trx_purge_truncate_history() already acquired an exclusive latch on it).

fsp_page_create(): If we are truncating a tablespace, try to reuse
a page that we may have already latched exclusively (because it was
in buf_pool.flush_list). To some extent, this helps the test
innodb.undo_truncate,16k to avoid running out of buffer pool.

mtr_t::commit_shrink(): Mark as clean all pages that are outside the
new bounds of the tablespace, and only add the newly reinitialized pages
to the buf_pool.flush_list.

buf_page_create(): Do not unnecessarily invoke change buffer merge on
undo tablespaces.

buf_page_t::clear_oldest_modification(bool temporary): Move some
assertions to the caller buf_page_write_complete().

innodb.undo_truncate: Use a bigger innodb_buffer_pool_size=24M.
On my system, it would otherwise hang 1 out of 1547 attempts
(on the 40th repeat of innodb.undo_truncate,16k).
Other page sizes were not affected.

At least since commit 055a3334
(MDEV-13564) the undo log truncation in InnoDB did not work correctly.

The main issue is that during the execution of
trx_purge_truncate_history() some pages of the newly truncated
undo tablespace could be discarded.

This is improved from commit 1cb218c3
which was applied to earlier-version branches.

fsp_try_extend_data_file(): Apply the peculiar rounding of
fil_space_t::size_in_header only to the system tablespace,
whose size can be expressed in megabytes in a configuration parameter.
Other files may freely grow by a number of pages.

fseg_alloc_free_page_low(): Do allow the extension of undo tablespaces,
and mention the file name in the error message.

mtr_t::commit_shrink(): Implement crash-safe shrinking of a tablespace:
(1) durably write the log
(2) release the page latches of the rebuilt tablespace
(3) release the mutexes
(4) truncate the file
(5) release the tablespace latch
This is refactored from trx_purge_truncate_history().

log_write_and_flush_prepare(), log_write_and_flush(): New functions
to durably write log during mtr_t::commit_shrink().

While the redo log is being resized in srv_start(),
we must not write checkpoint information to the old log.

Thanks to Matthias Leich for noticing this.

MDEV-26566 : galera.galera_var_cluster_address MTR failed: InnoDB: Assertion failure in file row0ins.cc line 3206

Actual problem was that we tried to calculate persistent statistics
to wsrep_schema tables in this case wsrep_streaming_log. These tables
should not have persistent statistics. Therefore, in table creation
tables should be created with STATS_PERSISTENT=0 table option. During
rolling-upgrade tables naturally already exists, thus we need to
alter them to contain STATS_PERSISTENT=0 table option.

Test changes only: do not output mysql.wsrep_streaming_log
contents.