The function remove_eq_cond removes the parts of a disjunction
for which it has been proved that they are always true. In the
result of this removal the disjunction may be converted into a 
formula without OR that must be merged into the the AND formula
that contains the disjunction.
The merging of two AND conditions must take into account the
multiple equalities that may be part of each of them.
These multiple equality must be merged and become part of the
and object built as the result of the merge of the AND conditions.
Erroneously the function remove_eq_cond lacked the code that 
would merge multiple equalities of the merged AND conditions.
This could lead to confusing situations when at the same AND 
level there were two multiple equalities with common members
and the list of equal items contained only some of these 
multiple equalities.
This, in its turn, could lead to an incorrect work of the
function substitute_for_best_equal_field when it tried to optimize
ref accesses. This resulted in forming invalid TABLE_REF objects
that were used to build look-up keys when materialized subqueries
were exploited.
   

This bug in the legacy code could manifest itself in queries with
semi-join materialized subqueries.
When a subquery is materialized all conditions that are imposed
only on the columns belonging to the tables from the subquery 
are taken into account.The code responsible for subquery optimizations
that employes subquery materialization  makes sure to remove these
conditions from the WHERE conditions of the query obtained after
it has transformed the original query into a query with a semi-join.
If the condition to be removed is an equality condition it could
be added to ON expressions and/or conditions from disjunctive branches
(parts of OR conditions) in an attempt to generate better access keys
to the tables of the query. Such equalities are supposed to be removed
later from all the formulas where they have been added to.
However, erroneously, this was not done in some cases when an ON
expression and/or a disjunctive part of the OR condition could
be converted into one multiple equality. As a result some equality
predicates over columns belonging to the tables of the materialized
subquery remained in the ON condition and/or the a disjunctive 
part of the OR condition, and the excuter later, when trying to
evaluate them, returned wrong answers as the values of the fields
from these equalities were not valid.  
This happened because any standalone multiple equality (a multiple
equality that are not ANDed with any other predicates) lacked
the information about equality predicates inherited from upper
levels (in particular, inherited from the WHERE condition).
The fix adds a reference to such information to any standalone
multiple equality. 

The wrong result set returned by the left join query  from
the bug test case happened due to several inconsistencies 
and bugs of the legacy mysql code.

The bug test case uses an execution plan that employs a scan
of a materialized IN subquery from the WHERE condition.
When materializing such an IN- subquery the optimizer injects
additional equalities  into the WHERE clause. These equalities
express the constraints imposed by the subquery predicate.
The injected equality of the query in the  test case happens
to belong to the same equality class, and a new equality 
imposing a condition on the rows of the materialized subquery
is inferred from this class. Simultaneously the multiple
equality is added to the ON expression of the LEFT JOIN
used in the main query.
  
The inferred equality of the form f1=f2 is taken into account
when optimizing the scan of  the rows the temporary table 
that is the result of the subquery materialization: only the 
values of the field f1 are read from the table into the record 
buffer. Meanwhile the inferred equality is removed from the
WHERE conditions altogether as a constraint on the fields
of the temporary table that has been used when filling this table. 
This equality is supposed to be removed from the ON expression
when the multiple equalities of the ON expression are converted
into an optimal set of equality predicates. It supposed to be
removed from the ON expression as an equality inferred from only
equalities of the WHERE condition. Yet, it did not happened
due to the following bug in the code.

Erroneously the code tried to build multiple equality for ON
expression twice: the first time, when it called optimize_cond()
for the WHERE condition, the second time, when it called
this function for the HAVING condition. When executing
optimize_con() for the WHERE condition  a reference
to the multiple equality of the WHERE condition is set
in the multiple equality of the  ON expression. This reference
would allow later to convert multiple equalities of the
ON expression into equality predicates. However the 
the second call of build_equal_items() for the ON expression
that happened when optimize_cond() was called for the
HAVING condition reset this reference to NULL.

This bug fix blocks calling build_equal_items() for ON
expressions for the second time. In general, it will be
beneficial for many queries as it removes from ON 
expressions any equalities that are to be checked for the
WHERE condition.
The patch also fixes two bugs in the list manipulation
operations and a bug in the function  
substitute_for_best_equal_field() that resulted
in passing wrong reference to the multiple equalities
of where conditions when processing multiple
equalities  of ON expressions.

The code of substitute_for_best_equal_field() and
the code the helper function eliminate_item_equal()
were also streamlined and cleaned up.
Now the conversion of the multiple equalities into
an optimal set of equality predicates first produces
the sequence of the all equalities processing multiple
equalities one by one, and, only after this, it inserts
the equalities at the beginning of the other conditions.

The multiple changes in the output of EXPLAIN
EXTENDED are mainly the result of this streamlining,
but in some cases is the result of the removal of
unneeded equalities from ON expressions. In
some test cases this removal were reflected in the
output of EXPLAIN resulted in disappearance of 
“Using where” in some rows of the execution plans.

Analysis:
Range analysis detects that the subquery is expensive and doesn't
build a range access method. Later, the applicability test for loose
scan doesn't take that into account, and builds a loose scan method
without a range scan on the min/max column. As a result loose scan
fetches the first key in each group, rather than the first key that
satisfies the condition on the min/max column.

Solution:
Since there is no SEL_ARG tree to be used for the min/max column,
it is not possible to use loose scan if the min/max column is compared
with an expensive scalar subquery. Make the test for loose scan
applicability to be in sync with the range analysis code by testing if
the min/max argument is compared with an expensive predicate.

Missed update_used_tables() call for multi-update values.

This bug happened because the executor tried to use a wrong
TABLE REF object when building access keys. It constructed
keys from fields of a materialized table from a ref object
created to construct keys from the fields of the underlying
base table. This could happen only when materialized table
was created for a non-correlated IN subquery and only
when the materialized table used for lookups.
In this case we are guaranteed to be able to construct the
keys from the fields of tables that would be outer tables
for the tables of the IN subquery.
The patch makes sure that no ref objects constructed from
fields of materialized lookup tables are to be used.

Analys:
The cause for the wrong result was that the optimizer
incorrectly chose min/max loose scan when it is not
applicable. The applicability test missed the case when
a condition on the MIN/MAX argument was OR-ed with a
condition on some other field. In this case, the MIN/MAX
condition cannot be used for loose scan.

Solution:
Extend the test check_group_min_max_predicates() to check
that the WHERE clause is of the form: "cond1 AND cond2"
where 
  cond1 - does not use min_max_column at all.
  cond2 - is an AND/OR tree with leaves in form "min_max_column $CMP$ const"
          or $CMP$ is one of the functions between, is [not] null

MDEV-3875 Wrong result (missing row) on a DISTINCT query with the same subquery in the SELECT list and GROUP BY

fix remove_dup_with_hash_index() and remove_dup_with_compare() to take NULLs into account

reached by fix_fields() (via reference) before row which it belongs to (on the second execution)
and fix_field for row did not follow usual protocol for Items with argument
(first check that the item fixed then call fix_fields).

Item_row::fix_field fixed.

MDEV-729 lp:998028 - Server crashes on normal shutdown in closefrm after executing a query from MyISAM table

don't write a key value into the record buffer - a key length can be larger then the record length.

MDEV-759 lp:998340 - Valgrind complains on simple selects containing expression DAY(FROM_UNIXTIME(-1))

check item->null_value before using the result of item->val_int()

mysqldump.c: s/SET OPTION/SET/
(OPTION was, hm, optional since 3.21, so there's no need to use SET OPTION even
in the old compatibility modes)

instead of returning Access denied on the incorrect user name,
emulate the complete failed logic procedure, possibly with
the change plugin packet.

  
allow only three failed change_user per connection.
successful change_user do NOT reset the counter

tests/mysql_client_test.c:
  make --error to work for --change_user errors

This bug could result in returning 0 for the expressions of the form 
<aggregate_function>(distinct field) when the system variable  
max_heap_table_size was set to a small enough number.
It happened because the method Unique::walk() did not support
the case when more than one pass was needed to merge the trees
of distinct values saved in an external file.

Backported a fix in grant_lowercase.test from mariadb 5.5.

MDEV-4029 SELECT on information_schema using a subquery locks up the information_schema table due to incorrect mutexes handling
  
Early evaluation of subqueries in the WHERE conditions on I_S.*_STATUS tables,
otherwise the subquery on this same table will try to acquire LOCK_status twice.

The problem was that maybe_null of Item_row and its componetes was unsynced after update_used_tables() (and so pushed_cond_guards was not initialized but then requested).

Fix  updates Item_row::maybe_null on update_used_tables().

MDEV-3900 Optimizer difference between MySQL and MariaDB with stored functions in WHERE clause of UPDATE or DELETE statements

Analysis
The reason for the less efficient plan was result of a prior design decision -
to limit the eveluation of constant expressions during optimization to only
non-expensive ones. With this approach all stored procedures were considered
expensive, and were not evaluated during optimization. As a result, SPs didn't
participate in range optimization, which resulted in a plan with table scan
rather than index range scan.

Solution
Instead of considering all SPs expensive, consider expensive only those SPs
that are non-deterministic. If an SP is deterministic, the optimizer will
checj if it is constant, and may eventually evaluate it during optimization.

Don't reset maybe_null in update_used_tables(); This breaks ROLLUP
This fixed failing test in group_by.test

Subquery turned into constant too late to be excluded from grouping list so test for constant added to the create_temp_table().

The original patch with the implementation of virtual columns
did not support INSERT DELAYED into tables with virtual columns.
This patch fixes the problem.

The bug could lead to a wrong estimate of the number of expected rows
in the output of the EXPLAIN commands for queries with GROUP BY.
This could be observed in the test case for LP bug 934348.

MDEV-4020 : Make sure strmov symbol is exported by client library  on Linux (even if the server and libraries itself use stpcpy instead of it)

It is a workaround that allows myodbc built by certain distributions' (CentOS,Fedora) to peacefully coexist with mariadb client libraries.
The problem is that MyODBC in these distros needs strmov() to be exported by mysql client shared library, or else myodbc fails to load.

MDEV-3942 FROM_DAYS(<timestamp column>) returns different result in MariaDB comparing to MySQL: NULL vs 0000-00-00

fixed a regression, introduced while fixing MDEV-456