FAILS ON SOLARIS

This assertion was triggered if gethostbyaddr_r cannot do a
reverse lookup on an ip address. The reason was a missing
DBUG_RETURN macro. The problem affected only debug versions of
the server.

This patch fixes the problem by replacing return with DBUG_RETURN.
No test case added.

Bug#11764671  57533: UNINITIALISED VALUES IN COPY_AND_CONVERT (SQL_STRING.CC) WITH CERTAIN CHA
When ROUND evaluates decimal result it uses Item::decimal
value as fraction value for the result. In some cases
Item::decimal is greater than real result fraction value
and uninitialised memory of result(decimal) buffer can be
used in further calculations. Issue is introduced by
Bug33143 fix. The fix is to remove erroneous assignment.


mysql-test/r/func_math.result:
  test case
mysql-test/t/func_math.test:
  test case
sql/item_func.cc:
  remove erroneous assignment

Update test case

.0

The bug was fixed by the patch for bug number BUG 11763109 - 55779: SELECT
DOES NOT WORK PROPERLY IN MYSQL SERVER VERSION "5.1.42 SUSE MYSQL (Exact same
fix as was proposed for this bug.) Since the motivation for the two bug
reports was completely different, however, it still makes sense to push the
test case.

This patch contains only the test case.

Some multibyte sequences could be considered by my_mbcharlen() functions
as multibyte character but more exact my_ismbchar() does not think so.
In such a case this multibyte sequences is pushed into 'stack' buffer which
is too small to accommodate the sequence.
The fix is to allocate stack buffer in
compliance with max character length.


mysql-test/r/loaddata.result:
  test case
mysql-test/t/loaddata.test:
  test case
sql/sql_load.cc:
  allocate stack buffer in compliance with max character length.

Instead of just filtering space, filter white space (\s)
I left the default.experimental file as is, with tabs.

Valgrind warnings were caused by comparing index values to an un-initialized field.


mysql-test/r/subselect.result:
  New test cases.
mysql-test/t/subselect.test:
  New test cases.
sql/opt_sum.cc:
  Add thd to opt_sum_query enabling it to test for errors.
  If we have a non-nullable index, we cannot use it to match null values,
  since set_null() will be ignored, and we might compare uninitialized data.
sql/sql_select.cc:
  Add thd to opt_sum_query, enabling it to test for errors.
sql/sql_select.h:
  Add thd to opt_sum_query, enabling it to test for errors.

Fix for --vs-config applied
Find.pm incorrectly tested an unitialized local variable instead
  of the global, corrected.
Find.pm is also wrong in 5.5: uses a non-existent global variable. Fix when
  merging up.

There are two problems with ANALYSE():

1. Memory leak 
   it happens because do_select() can overwrite
   JOIN::procedure field(with zero value in our case) and
   JOIN destructor don't free the memory allocated for
   JOIN::procedure. The fix is to save original JOIN::procedure
   before do_select() call and restore it after do_select
   execution.

2. Wrong result
   If ANALYSE() procedure is used for the statement with LIMIT clause
   it could retrun empty result set. It happens because of missing 
   analyse::end_of_records() call. First end_send() function call
   returns NESTED_LOOP_QUERY_LIMIT and second call of end_send() with
   end_of_records flag enabled does not happen. The fix is to return
   NESTED_LOOP_OK from end_send() if procedure is active.


mysql-test/r/analyse.result:
  test case
mysql-test/t/analyse.test:
  test case
sql/sql_select.cc:
  --save original JOIN::procedure before do_select() call and
    restore it after do_select execution.
  --return NESTED_LOOP_OK from end_send() if procedure is active

When we create temporary result table for UNION
incorrect max_length for YEAR field is used and
it leads to incorrect field value and incorrect
result string length as YEAR field value calculation
depends on field length.
The fix is to use underlying item max_length for
Item_sum_hybrid::max_length intialization.


mysql-test/r/func_group.result:
  test case
mysql-test/t/func_group.test:
  test case
sql/field.cc:
  added assert
sql/item_sum.cc:
  init Item_sum_hybrid::max_length with 
  use underlying item max_length for
  INT result type.

Valgrind warning happens due to early null values check
in Item_func_in::fix_length_and_dec(before item evaluation).
As result null value items with uninitialized values are
placed into array and it leads to valgrind warnings during
value array sorting.
The fix is to check null value after item evaluation, item
is evaluated in in_array::set() method.


mysql-test/r/func_in.result:
  test case
mysql-test/t/func_in.test:
  test case
sql/item_cmpfunc.cc:
  The fix is to check null value after item evaluation.

In ha_innobase::create(), we check some things while holding an
exclusive lock on the data dictionary. Defer the locking and the
creation of transactions until after the checks have passed. The
THDVAR could hang due to a mutex wait (see Bug #11750569 - 41163:
deadlock in mysqld: LOCK_global_system_variables and LOCK_open), and
we want to avoid waiting while holding InnoDB mutexes.

innobase_index_name_is_reserved(): Replace the parameter trx_t with
THD, so that the test can be performed before starting an InnoDB
transaction. We only needed trx->mysql_thd.

ha_innobase::create(): Create transaction and lock the data dictionary
only after passing the basic tests.

create_table_def(): Move the IS_MAGIC_TABLE_AND_USER_DENIED_ACCESS
check to ha_innobase::create(). Assign to srv_lower_case_table_names
while holding dict_sys->mutex.

ha_innobase::delete_table(), ha_innobase::rename_table(),
innobase_rename_table(): Assign srv_lower_case_table_names as late as
possible. Here, the variable is not necessarily protected by
dict_sys->mutex.

ha_innobase::add_index(): Invoke innobase_index_name_is_reserved() and
innobase_check_index_keys() before allocating anything.

rb:618 approved by Jimmy Yang

Select from a view with the underlying HAVING clause failed with a
message: "1356: View '...' references invalid table(s) or column(s)
or function(s) or definer/invoker of view lack rights to use them"

The bug is a regression of the fix for bug 11750328 - 40825 (similar
case, but the HAVING cause references an aliased field).
In the old fix for bug 40825 the Item_field::name_length value has
been used in place of the real length of Item_field::name. However,
in some cases Item_field::name_length is not in sync with the
actual name length (TODO: combine name and name_length into a
solid String field).

The Item_ref::print() method has been modified to calculate actual
name length every time.


mysql-test/r/view.result:
  Test case for bug #11829681
mysql-test/t/view.test:
  Test case for bug #11829681
sql/item.cc:
  Bug #11829681 - 60295: ERROR 1356 ON VIEW THAT EXECUTES FINE AS A QUERY
  
  The Item_ref::print() method has been modified to calculate actual
  name length every time.
sql/item.h:
  Minor commentary.

               create_schema if auto-generate-sql also set.

mysqlslap uses a schema to run its tests on and later
drops it if auto-generate-sql is used. This can be a
problem, if the schema is an already existing one.

If create-schema is used with auto-generate-sql option,
mysqlslap while performing the cleanup, drops the specified
database.

Fixed by introducing an option --no-drop, which, if used,
will prevent the dropping of schema at the end of the test.


client/client_priv.h:
  Bug#11765157 - 58090: mysqlslap drops schema specified in
                 create_schema if auto-generate-sql also set.
  
  Added an option.
client/mysqlslap.c:
  Bug#11765157 - 58090: mysqlslap drops schema specified in
                 create_schema if auto-generate-sql also set.
  
  Introduced an option 'no-drop' to forbid the removal of schema
  even if 'create' or 'auto-generate-sql' options are used.
mysql-test/r/mysqlslap.result:
  Added a testcase for Bug#11765157.
mysql-test/t/mysqlslap.test:
  Added a testcase for Bug#11765157.

causes future shutdown hang

InnoDB would hang on shutdown if any XA transactions exist in the
system in the PREPARED state. This has been masked by the fact that
MySQL would roll back any PREPARED transaction on shutdown, in the
spirit of Bug #12161 Xa recovery and client disconnection.

[mysql-test-run] do_shutdown_server: Interpret --shutdown_server 0 as
a request to kill the server immediately without initiating a
shutdown procedure.

xid_cache_insert(): Initialize XID_STATE::rm_error in order to avoid a
bogus error message on XA ROLLBACK of a recovered PREPARED transaction.

innobase_commit_by_xid(), innobase_rollback_by_xid(): Free the InnoDB
transaction object after rolling back a PREPARED transaction.

trx_get_trx_by_xid(): Only consider transactions whose
trx->is_prepared flag is set. The MySQL layer seems to prevent
attempts to roll back connected transactions that are in the PREPARED
state from another connection, but it is better to play it safe. The
is_prepared flag was introduced in the InnoDB Plugin.

trx_n_prepared: A new counter, counting the number of InnoDB
transactions in the PREPARED state.

logs_empty_and_mark_files_at_shutdown(): On shutdown, allow
trx_n_prepared transactions to exist in the system.

trx_undo_free_prepared(), trx_free_prepared(): New functions, to free
the memory objects of PREPARED transactions on shutdown. This is not
needed in the built-in InnoDB, because it would collect all allocated
memory on shutdown. The InnoDB Plugin needs this because of
innodb_use_sys_malloc.

trx_sys_close(): Invoke trx_free_prepared() on all remaining
transactions.

Spotted by:	Marko

Bug#59410 read uncommitted: unlock row could not find a 3 mode lock
on the record

This bug is present only in 5.6 but I am adding the test case to earlier
versions to ensure it never appears in earlier versions too.

Bug#59410 read uncommitted: unlock row could not find a 3 mode lock
on the record

This bug is present only in 5.6 but I am adding the test case to earlier
versions to ensure it never appears in earlier versions too.

   on lctn2 systems

There was a local variable in get_all_tables() to store the 
"original" value of the database name as it can get lowercased
depending on the lower_case_table_name value.
get_all_tables() iterates over database names and for each 
database iterates over the tables in it.
The "original" db name was assigned in the table names loop.
Thus the first table is ok, but the second and subsequent tables
get the lowercased name from processing the first table.
Fixed by moving the assignment of the original database name
from the inner (table name) to the outer (database name) loop.
Test suite added.

In the string context the MIN() and MAX() functions don't take
into account the unsignedness of the UNSIGNED BIGINT argument
column.

I.e.:
        CREATE TABLE t1 (a BIGINT UNSIGNED);
        INSERT INTO t1 VALUES (18446668621106209655);
        SELECT CONCAT(MAX(a)) FROM t1;

returns -75452603341961.


mysql-test/r/func_group.result:
  Test case for bug #11766094.
mysql-test/t/func_group.test:
  Test case for bug #11766094.
sql/item.cc:
  Bug #11766094 - 59132: MIN() AND MAX() REMOVE UNSIGNEDNESS
  
  The Item_cache_int::val_str() method has been modified to
  take into account the unsigned_flag value when converting
  data to string.

The patch fixes a build problem on MacOSX, where
the compiler complains about unused parameters.