Problem:
=======
Found using AddressSanitizer testing.

The mysqlbinlog utility may result in out-of-bound heap
buffer reads and thus, undefined behaviour, when processing
RBR events in the old (pre-5.1 GA) format.

The following code in process_event() would only be correct
if Rows_log_event was the base class for
Write,Update,Delete_rows_log_event_old classes:

    case PRE_GA_WRITE_ROWS_EVENT:
    case PRE_GA_DELETE_ROWS_EVENT:
    case PRE_GA_UPDATE_ROWS_EVENT:
...
        Rows_log_event *e= (Rows_log_event*) ev;
        Table_map_log_event *ignored_map=
          print_event_info->m_table_map_ignored.get_table(e->get_table_id());
...
        if (e->get_flags(Rows_log_event::STMT_END_F))
        {
...
        }

However, Rows_log_event is only the base class for the
Write,Update_Delete_rows_event family of classes, but not
for their *_old counterparts. So the above typecasts are
incorrect for the old-format RBR events and may result (and
do result according to AddressSanitizer reports) in reading
memory outside of the previously allocated on heap buffer.

Fix:
===
The above mentioned invalid type cast has been replaced with
appropriate old counterpart.

Note:The above mentioned issue is present only mysql-5.1 and
5.5. This is fixed in mysql-5.6 and above as part of 
Bug#55790. Hence few of the relevant changes of Bug#55790 are
being back ported to fix the current issue.

  INTERACTIVE MODE

In interactive mode, libedit/readline allocates memory
for every new line entered & later the allocated memory
never gets freed.

Fixed by freeing the allocated memory blocks appropriately.

Back porting fix from mysql-5.5

Item_func_group_concat::copy_or_same() creates a copy of original object.
It also creates a copy of ORDER structure because ORDER struct elements may
be modified in find_order_in_list() called from Item_func_group_concat::setup().
As ORDER copy is created using memcpy, ORDER::next elements point to original
ORDER structs. Thus find_order_in_list() called from EXECUTE stmt modifies
ordinal ORDER item pointers so they point to runtime items, these items are
freed after execution, so original ORDER structure becomes invalid.
The fix is to properly update ORDER::next fields so that they point to
new ORDER elements.

COLUMNS ARE USED INSIDE A STORED PROCEDURE

Post-push fix.
String::operator=() in client/sql_string.h also 
needs to be updated with fix.

No commit message

COLUMNS ARE USED INSIDE A STORED PROCEDURE                                      
                                                                                
Problem: The operator '=' overload method inside
'String' class is not coping str_charset member from
R.H.S object to L.H.S object. Hence charset is wrongly
set while using string assignments

Analaysis: The above mentioned problem is
identified while doing the analaysis of bug#14593883.
Though the test scenario mentioned in the bug page
is not  an issue in mysql-5.1 code, the actual root cause
ie., "str_charset member is not copied" exists in the 
mysql-5.1 code base. 

Fix: Handle coping str_charset member in operator '=' overload                  
method.

For a fresh insert, page_zip_available() was counting some fields twice.
In the worst case, the compressed page size grows by PAGE_ZIP_DIR_SLOT_SIZE
plus the size of the record that is being inserted. The size of the record
already includes the fields that will be stored in the uncompressed portion
of the compressed page.

page_zip_get_trailer_len(): Remove the output parameter entry_size,
because no caller is interested in it.

page_zip_max_ins_size(), page_zip_available(): Assume that the page grows
by PAGE_ZIP_DIR_SLOT_SIZE and the record size (which includes the fields
that would be stored in the uncompressed portion of the page).

rb#2169 approved by Sunny Bains

No commit message

No commit message

IN IN-CLAUSE USING MYISAM OR MEMORY ENGINE

Backport from 5.6. Original message:

The coincidences caused a data loss:
* The query has IN subqueries nested twice,
* the WHERE clause of the inner subquery refers to the
  outer field, and the whole WHERE clause returns FALSE,
* the inner subquery has a LEFT JOIN that joins a single
  row with a row of NULLs; one of that NULL columns
  represents the select list of the subquery.

Normally, that inner subquery should return empty record set.
However, in our case:
* the Item_is_not_null_test item goes constant, since
  its underlying field is NULL (because of LEFT JOIN ... ON 
  FALSE of const table row with a row of nulls);
* we evaluate Item_is_not_null_test::val_int() as a part
  of fake HAVING expression of the transformed subquery;
* as far as the underlying field is NULL, we optimize
  out the whole fake HAVING expression as FALSE as well
  as a whole subquery with a zero result:
  Impossible HAVING noticed after reading const tables";
* thus, the optimizer ignores the presence of the WHERE
  clause (the WHERE expression is FALSE in our case, so
  the subquery should return empty set);
* however, during the evaluation of the 
  Item_is_not_null_test::val_int() in the optimizer,
  it marked its "owner" with the "was_null" flag -- that
  forced the subquery to return UNKNOWN instead of empty
  set.
That caused a wrong result.


The problem is a regression of the small cleanup in
the fix for the bug11827369 (the Item_is_not_null_test part)
that conflicts with optimizations in the fix for the bug11752543.
Before that regression the Item_is_not_null_test items
never were constants.

The fix is the rollback of Item_is_not_null_test parts
of the bug11827369 fix.

page_zip_compress_node_ptrs(): Do not attempt to invoke deflate() with
c_stream->avail_in, because it will result in Z_BUF_ERROR (and
page_zip_compress() failure and unnecessary further splits of the node
pointer page). A node pointer record can have empty payload, provided
that all key fields are empty.

Approved by Jimmy Yang

              GRANT STATEMENT

Description: A missing length check causes problem while
             copying source to destination when
             lower_case_table_names is set to a value
             other than 0. This patch fixes the issue
             by ensuring that requried bound check is
             performed.

No commit message

Problem:

When the VALUES() function is inappropriately used in the SET stmt the server
exits.  

set port = values(v);

This happens because the values(v) will be parsed as an Item_insert_value by
the parser.  Both Item_field and Item_insert_value return the type as
FIELD_ITEM.  But for Item_insert_value the field_name member is NULL.  In
set_var constructor, when the type of the item is FIELD_ITEM we try to access
the non-existent field_name. 

The class hierarchy is as follows:
Item -> Item_ident -> Item_field -> Item_insert_value

The Item_ident::field_name is NULL for Item_insert_value.  

Solution:

In the parsing stage, in the set_var constructor if the item type is
FIELD_ITEM and if the field_name is non-existent, then it is probably
the Item_insert_value.  So leave it as it is for later evaluation.

rb://2004 approved by Roy and Norvald.

HOST HAS '_' IN THE HOSTNAME

Problem:
=======
'_' and '%' are treated as a wildcards by the ACL code and
this is documented in the manual. The problem with
mysql_install_db is that it does not take this into account
when creating the initial GRANT tables:

--- cut ---
REPLACE INTO tmp_user SELECT @current_hostname,'root','','Y',
'Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y',
'Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',
0,0,0,0 FROM dual WHERE LOWER( @current_hostname) != 'localhost';
--- cut ---

If @current_hostname contains any wildcard characters, then 
a wildcard entry will be defined for the 'root' user, 
which is a flaw.

Analysis:
========
As per the bug description when we have a hostname with a
wildcard character in it, it allows clients from several other
hosts with similar name pattern to connect to the server as root.
For example, if the hostname is like 'host_.com' then the same
name is logged in mysql.user table. This allows 'root' users
from other hosts like 'host1.com', 'host2.com' ... to connect
to the server as root user.

While creating the intial GRANT tables we do not have a check
for wildcard characters in hostname.

Fix:
===
As part of fix escape character "\" is added before wildcard
character to make it a plain character, so that the one and
only host with the exact name will be able to connect to the
server.

              OPENSSL

Description: Specify preference to disable compression
             while using OpenSSL library. OpenSSL uses
             zlib compression by default which may
             lead to some problems.

No commit message

Post-push fix, broken build:
sql/rpl_master.cc:1049:70: error: converting ‘false’ to pointer type ‘bool*’ [-Werror=conversion-null]

              PLATFORM= MACOSX10.6 X86_64 MAX

Problem: The test was failing on pb2's mac machine because
         it was not cleaned up properly. The test checks if
         the command 'start slave until' throws a proper
         error when issued with a wrong number/type of
         parameters. After this,the replication stream was
         stopped using the include file 'rpl_end.inc'.
         The errors thrown earlier left the slave in an
         inconsistent state to be closed by the include
         file which was caught by the mac machine.

Fix: Started slave by invoking start_slave.inc to have a
     working slave before calling rpl_reset.inc

Problem: The test file was not in a good shape. It tested
         start slave until relay log file/pos combination 
         wrongly. A couple of commands were executed at 
         master and replicated at slave. Next, the 
         coordinates in terms of relay log file and pos 
         were noted down followed by reset slave and start
         slave until saved relay log file/pos. Reset slave
         deletes  all relay log files and makes the slave 
         forget its replication position. So, using the 
         saved coordiantes after reset slave is wrong.

Fix: Split the test in two parts:
     a) Test for start slave until master log file/pos and
        checking for correct errors in the failure 
        scenarios.
     b) Test for start slave until relay log file/pos.

Problem: The variables auto_increment_increment and 
         auto_increment_offset were set in the the include
         file rpl_init.inc. This was only configured for 
         some connections that are rarely used by test 
         cases, so likely that it will cause confusion. 
         If replication tests want to setup these variables
         they should do so explicitly.

Fix:
     a) Removed code to set the variables
        auto_increment_increment and auto_increment_offset
        in the include file.
     b) Updated tests files using the same.

In method mysql_binlog_send, right after detecting a EOF in the
read event loop, and before deciding if we should change to a new
binlog file there is a execution window where new events can be
written to the binlog and a rotation can happen. When reaching
the test, the function will then change to a new binlog file
ignoring all the events written in this window. This will result
in events not being replicated.

Only when the binlog is detected as deactivated in the event loop
of the dump thread, can we really know that no more events
remain. For this reason, this test is now made under the log lock
in the beginning of the event loop when reading the events.

              TLS AND DTLS RECORD PROTOCOLS

Description: In yassl, decryption phase in TLS protocol
             depends on type of padding. This patch
             removes this dependancy and makes error
             generation/decryption process independent
             of padding type.

      
post push fix: 
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.

Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.

For the error code ER_TOO_LONG_IDENT, the identifier is expected in the my_error call.  So removing this line from here.  

FROM SHOW CREATE

Problem: The length of the internally generated foreign key name 
is not checked. 

Solution: The length of the internally generated foreign key name is
checked.  If it is greater than the allowed limit, an error message
is reported. Also, the constraint name is printed in the same manner
as the table name, using the system charset information.

rb://1969 approved by Marko.

Reverting back the previous changes as they are causing
issues in PB2.

Problem: Sys_vars suite is disabled in mysql-5.1 branch.
Fix: To enable sys_vars suite in mysql-5.1, add it in
mysql-test-run.pl file and also sys_vars suite should be
added to Makefile.am inorder to get that test directory

will not export internal symbols.

srv_export_innodb_status(): Read the purge_sys fields while holding
purge_sys->latch.

Approved by Sunny Bains

             5.1 SERVER

Problem was caused by the COM_CHANGE_USER parsing code. That code ignored
character set number passed in COM_CHANGE_USER packet. Instead
character_set_client values was used. User name was not converted at all.

Fixed by using passed character set number to convert both db and user names.
If COM_CHANGE_USER does not contain character set number then
character_set_client is used to convert both names.

This is a backport of the fix for:

Bug#13633549 HANDLE_FATAL_SIGNAL IN TEST_IF_SKIP_SORT_ORDER/CREATE_SORT_INDEX
Don't invoke the range optimizer for a NULL select.

SUITE FOR 5.1

SYS_VARS suite is not enabled in MTR by default
run. Enabling it with this check-in.