ALTER TABLE AFTER DROP PARTITION
Bug#13608188 - 64038: CRASH IN HANDLER::HA_THD ON ALTER TABLE AFTER
                      REPAIR NON-EXISTING PARTITION

Backport of bug#13357766 from -trunk to -5.5.

The state of some partitions was not reset on failure, leading
to invalid states of partitions in consequent statements.

Fixed by reverting back to original state for all partitions
if not all partition names was resolved.

Also adding extra security by forcing tables to be reopened
in case of error in mysql_alter_table.

(There is also removal of \r at the end of some lines.)

      KEY HANDLING ON SUBSEQUENT CREATE TABLE IF NOT EXISTS
      
      PROBLEM:
      --------
      Consider a SP routine which does CREATE TABLE
      with REFERENCES clause. The first call to this routine
      invokes parser and the parsed items are cached, so as 
      to avoid parsing for the second execution of the routine.
      
      It is obsevered that valgrind reports a warning
      upon read of thd->lex->alter_info->key_list->Foreign_key object,
      which seem to be pointing to a invalid memory address
      during second time execution of the routine. Accessing this object
      theoretically could cause a crash.
      
      ANALYSIS:
      ---------
      The problem stems from the fact that for some reason
      elements of ref_columns list in thd->lex->alter_info->
      key_list->Foreign_key object are changed to point to
      objects allocated on runtime memory root.
      
      During the first execution of routine we create
      a copy of thd->lex->alter_info object.
      As part of this process we create a clones of objects in
      Alter_info::key_list and of Foreign_key object in particular.
      Then Foreign_key object is cloned for some reason we
      perform shallow copies of both Foreign_key::ref_columns
      and Foreign_key::columns list. So new instance of 
      Foreign_key object starts to SHARE contents of ref_columns
      and columns list with the original instance.
      After that as part of cloning process we call
      list_copy_and_replace_each_value() for elements of
      ref_columns list. As result ref_columns lists in both
      original and cloned Foreign_key object start to contain
      pointers to Key_part_spec objects allocated on runtime
      memory root because of shallow copy.
      
      So when we start copying of thd->lex->alter_info object
      during the second execution of stored routine we indeed
      encounter pointer to the Key_part_spec object allocated
      on runtime mem-root which was cleared during at the end
      of previous execution. This is done in sp_head::execute(), 
      by a call to free_root(&execute_mem_root,MYF(0));
      As result we get valgrind warnings about accessing 
      unreferenced memory.
      
      FIX:
      ----
      The safest solution to this problem is to 
      fix Foreign_key(Foreign_key, MEM_ROOT) constructor to do
      a deep copy of columns lists, similar to Key(Key, MEM_ROOT) 
      constructor.

Bug#13011410 CRASH IN FILESORT CODE WITH GROUP BY/ROLLUP

The assert in 13580775 is visible in 5.6 only, 
but shows that all versions are vulnerable.
13011410 crashes in all versions.

filesort tries to re-use the sort buffer between invocations in order to save
malloc/free overhead.
The fix for Bug 11748783 - 37359: FILESORT CAN BE MORE EFFICIENT.
added an assert that buffer properties (num_records, record_length) are
consistent between invocations. Indeed, they are not necessarily consistent.
  
Fix: re-allocate the sort buffer if properties change.


mysql-test/r/partition.result:
  New tests.
mysql-test/t/partition.test:
  New tests.
sql/filesort.cc:
  If we already have allocated a sort buffer in a previous execution,
  then verify that it is big enough for the current one.
sql/table.h:
  Add sort_keys_size; Number of bytes allocated for the sort_keys buffer.

merge of Nirbhay's AIX compilation fix for 5.1.61

Fixing the 5.5 part (the 5.6 part will go in a separate commit soon).

Problem:
  Item_direct_ref::get_date() incorrectly calculated its "null_value",
  which made UNIX_TIMESTAMP(view_column) incorrectly return NULL
  for a NOT NULL view_column.

Fix:
  Make Item_direct_ref::get_date() calculate null_value
  in the similar way with the other methods 
  (val_real,val_str,val_int,val_decimal):
  copy null_value from the referenced Item.

modified:
  mysql-test/r/func_time.result
  mysql-test/t/func_time.test
  sql/item.cc

                     routines.

mysqldump in xml mode did not dump routines, events or
triggers.

This patch fixes this issue by fixing the if conditions
that disallowed the dump of above mentioned objects in
xml mode, and added the required code to enable dump
in xml format.


client/mysqldump.c:
  BUG#11760384 - 52792: mysqldump in XML mode does not dump
                        routines.
  
  Fixed some if conditions to allow execution of dump methods
  for xml and further added the relevant code at places to produce
  the dump in xml format.
mysql-test/r/mysqldump.result:
  Added a test case for Bug#11760384.
mysql-test/t/mysqldump.test:
  Added a test case for Bug#11760384.

Moving query_cache_size_basic_32.test and query_cache_size_basic_64.test from experimental
to disabled as a solution has still not been found.

If we meet DB_TOO_MANY_CONCURRENT_TRXS during the execution tab_create_graph from row_create_table_for_mysql(), .ibd file for the table should be created already but was not deleted for the error handling.

rb:875 approved by Jimmy Yang

If we meet DB_TOO_MANY_CONCURRENT_TRXS during the execution tab_create_graph from row_create_table_for_mysql(), .ibd file for the table should be created already but was not deleted for the error handling.

rb:875 approved by Jimmy Yang

Text conflict in sql/sql_yacc.yy

------------------------------------------------------------
revno: 3258
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
branch nick: mysql-trunk-bug12663165
timestamp: Thu 2011-07-14 10:05:12 +0200
message:
  Bug#12663165 SP DEAD CODE REMOVAL DOESN'T UNDERSTAND CONTINUE HANDLERS
  
  When stored routines are loaded, a simple optimizer tries to locate
  and remove dead code. The problem was that this dead code removal
  did not work correctly with CONTINUE handlers.
  
  If a statement triggers a CONTINUE handler, the following statement
  will be executed after the handler statement has completed. This
  means that the following statement is not dead code even if the
  previous statement unconditionally alters control flow. This fact
  was lost on the dead code removal routine, which ended up with
  removing instructions that could have been executed. This could
  then lead to assertions, crashes and generally bad behavior when
  the stored routine was executed.
  
  This patch fixes the problem by marking as live code all stored
  routine instructions that are in the same scope as a CONTINUE handler.
  
  Test case added to sp.test.

Null merge from  5.1 for Bug 12872803 - 62154: FEDERATED.FEDERATED_SERVER TEST FAILS WITH RUN --REPEAT=2

Fixed it to work with "--repeat" option.

Fixed the testcase using timestamp logic while doing grep from the error file.

Fixed the testcase using timestamp logic while doing grep from the error file.

Use new syntax to mask different error output in affected tests

If init_command was incorrect, we couldn't let users execute
queries, but we couldn't report the issue to the client either
as it does not expect error messages before even sending a
command. Thus, we simply disconnected them without throwing
a clear error.

We now go through the proper sequence once (without executing
any user statements) so we can report back what the problem
is. Only then do we disconnect the user.

As always, root remains unaffected by this as init_command is
(still) not executed for them.

mysql-test/r/init_connect.result:
  We now report a proper error if init_command fails.
  Expect as much.
mysql-test/t/init_connect.test:
  We now report a proper error if init_command fails.
  Expect as much.
sql/sql_connect.cc:
  If init_command fails, throw an error explaining this to
  the user.

Port vasil.dimov@oracle.com-20111205083046-jtgi1emlvtfnjatt from mysql-trunk

Port vasil.dimov@oracle.com-20111205082900-lx9om1joscejr25e from mysql-trunk

Port vasil.dimov@oracle.com-20111205082831-7v1qu50hvd9hjr3g from mysql-trunk

Port vasil.dimov@oracle.com-20111205082756-wtlg8isyn4yohyny from mysql-trunk

Port vasil.dimov@oracle.com-20111205082626-87j5f48dq1ouk86r from mysql-trunk

InnoDB: Remove HAVE_purify, UNIV_INIT_MEM_TO_ZERO, UNIV_SET_MEM_TO_ZERO.

The compile-time setting HAVE_purify can mask potential bugs.
It is being set in PB2 Valgrind runs. We should simply get rid of it,
and replace it with UNIV_MEM_INVALID() to declare uninitialized memory
as such in Valgrind-instrumented binaries.

os_mem_alloc_large(), ut_malloc_low(): Remove the parameter set_to_zero.

ut_malloc(): Define as a macro that invokes ut_malloc_low().

buf_pool_init(): Never initialize the buffer pool frames. All pages
must be initialized before flushing them to disk.

mem_heap_alloc(): Never initialize the allocated memory block.

os_mem_alloc_nocache(), ut_test_malloc(): Unused function, remove.

rb:813 approved by Jimmy Yang