Add paths for ndb binaries
Some more backport issues


mysql-test/include/have_ndb.inc:
  Remove the check for NDB_STATUS_OK, handled by mysql-test-run.pl

 -Add support for detecting version and features from mysqld binary
 - Autodetect netware
 - Disable some features not available below 5.0
 - Cleanup executable_setup to look for one executable at a time, only llok for the ones that are needed based on the selected testcases and settings


mysql-test/lib/mtr_cases.pl:
  Backport from 5.1
mysql-test/lib/mtr_io.pl:
  Backport from 5.1
  Add new function mtr_appendfile_to_file
mysql-test/lib/mtr_misc.pl:
  Backport from 5.1
mysql-test/lib/mtr_process.pl:
  Backport from 5.1
mysql-test/lib/mtr_report.pl:
  Backport from 5.1
mysql-test/mysql-test-run.pl:
  Add support for detecting version and features from mysqld binary
  Autodetect netware
  Disable some features not available below 5.0
  Cleanup executable_setup to look for one executable at a time, only llok for the ones that are needed based on the selected testcases and settings
mysql-test/r/mysqltest.result:
  Update result
mysql-test/lib/mtr_im.pl:
  New BitKeeper file ``mysql-test/lib/mtr_im.pl''
mysql-test/lib/mtr_stress.pl:
  New BitKeeper file ``mysql-test/lib/mtr_stress.pl''

Add possibility to send warnings about suspicious commands in .test file to <result_file_name>.warnings file
Move detection of "parsing enabled" to after command has been read.
Cleanup parsing enabled/disabled

- Change con_host to ds_connection_name.str


client/mysqltest.c:
  Change con_host to ds_connection_name.str

mysql-test/r/init_file.result:
  Add new file init_file.result
mysql-test/r/mysql_client_test.result:
  Add new file mysql_client_test.result

 - ie. backport from 5.1
 - also update testcase error dected by new version


mysql-test/include/show_msg.inc:
  BitKeeper file /home/msvensson/mysql/same_tools/my41-same_tools/mysql-test/include/show_msg.inc
mysql-test/include/show_msg80.inc:
  BitKeeper file /home/msvensson/mysql/same_tools/my41-same_tools/mysql-test/include/show_msg80.inc
BitKeeper/deleted/.del-rpl_chain_temp_table.test:
  Delete: mysql-test/t/rpl_chain_temp_table.test
BitKeeper/deleted/.del-rpl_chain_temp_table.result:
  Delete: mysql-test/r/rpl_chain_temp_table.result
BitKeeper/deleted/.del-rpl_failsafe.result:
  Delete: mysql-test/r/rpl_failsafe.result
BitKeeper/deleted/.del-rpl_failsafe.test:
  Delete: mysql-test/t/rpl_failsafe.test
BitKeeper/deleted/.del-rpl_heap.test:
  Delete: mysql-test/t/rpl_heap.test
BitKeeper/deleted/.del-rpl_heap.result:
  Delete: mysql-test/r/rpl_heap.result
BitKeeper/deleted/.del-rpl000018.result:
  Delete: mysql-test/r/rpl000018.result
BitKeeper/deleted/.del-rpl000018.test:
  Delete: mysql-test/t/rpl000018.test
client/Makefile.am:
  Link mysqltest with mysys/my_copy.c
client/mysqltest.c:
  Update mysqltest to latest version
mysql-test/include/have_multi_ndb.inc:
  Remove old syntax "@filename" in favor of "--require filename"
mysql-test/include/master-slave.inc:
  Remove old syntax "@filename" in favor of "--require filename"
mysql-test/include/ps_query.inc:
  Remove the comment about no output now when it does.
mysql-test/r/check.result:
  Update output from --send
mysql-test/r/connect.result:
  Update result file for connect test after backport form 5.1
mysql-test/r/flush.result:
  Update output from --send
mysql-test/r/flush_block_commit.result:
  Update output from --send
mysql-test/r/func_misc.result:
  Update output from --send
mysql-test/r/grant2.result:
  Update output from --send
mysql-test/r/handler.result:
  Update output from --send
mysql-test/r/kill.result:
  Update output from --send
mysql-test/r/lock_multi.result:
  Update output from --send
mysql-test/r/mix_innodb_myisam_binlog.result:
  Update output from --send
mysql-test/r/mysqltest.result:
  Update mysqltest.result after backport
mysql-test/r/ps_2myisam.result:
  Update result as the output from query is now printed
mysql-test/r/ps_3innodb.result:
  Update result as the output from query is now printed
mysql-test/r/ps_4heap.result:
  Update result as the output from query is now printed
mysql-test/r/ps_5merge.result:
  Update result as the output from query is now printed
mysql-test/r/ps_6bdb.result:
  Update result as the output from query is now printed
mysql-test/r/ps_7ndb.result:
  Update result as the output from query is now printed
mysql-test/r/rename.result:
  Update output from --send
mysql-test/r/rpl000001.result:
  Update output from --send
mysql-test/r/rpl_error_ignored_table.result:
  Update output from --send
mysql-test/r/rpl_master_pos_wait.result:
  Update output from --send
mysql-test/r/subselect.result:
  Update result file after adding missing ;
mysql-test/r/synchronization.result:
  Update output from --send
mysql-test/r/type_blob.result:
  Update result file after adding missing ;
mysql-test/t/connect.test:
  Backport test from 5.1
mysql-test/t/init_file.test:
  Update test so something is printed
mysql-test/t/mysql_client_test.test:
  Update test so result is sent to file and something is printed
mysql-test/t/mysqltest.test:
  Backport latest mysqltest.test file
mysql-test/t/ps.test:
  Move the --replace_column statement to just before the statetement it should replace
mysql-test/t/ps_1general.test:
  Move the --replace_column statement to just before the statetement it should replace
mysql-test/t/ps_grant.test:
  Remove the $DB, no other test uses it
mysql-test/t/rpl_flush_tables.test:
  Fetch $SERVER_VERSION from the db server
mysql-test/t/rpl_trunc_temp.test:
  Remove the selection of connection master after it's been disconnected already
mysql-test/t/subselect.test:
  Add missing ;
mysql-test/t/type_blob.test:
  Add missing ;

into  shellback.(none):/home/msvensson/mysql/mysql-4.1-maint

BitKeeper/etc/ignore:
  Added mysql-test/mtr to the ignore list

into  rama.(none):/home/jimw/my/mysql-4.1-21288

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-4.1-maint

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-4.1-maint


tests/mysql_client_test.c:
  Auto merged

single file is a bad practice.  


tests/mysql_client_test.c:
  Replace literal characters which don't make sense in UTF8 with ubiquitously-
  understood numbers.

into  maint2.mysql.com:/data/localhome/tsmith/bk/41

into  maint2.mysql.com:/data/localhome/tsmith/bk/41


BUILD/SETUP.sh:
  Auto merged

into  zippy.cornsilk.net:/home/cmiller/work/mysql/bug04053/my41-bug04053


mysys/my_read.c:
  Auto merged

	event' from master"

Since there is no repeatable test case, and this is obviously wrong, this is
the most conservative change that might possibly work.  

The syscall  read()  wasn't checked for a negative return value for an
interrupted read.  The kernel  sys_read()  returns -EINTR, and the "library" 
layer maps that to return value of -1 and sets  errno  to EINTR.  It's 
impossible (on Linux) for  read()  to set errno EINTR without the return 
value being -1 .

So, if we're checking for EINTR behavior, we should not require that the
return value be zero.


mysys/my_read.c:
  The read() syscall should check for negative one, since that (usually) signals
  errors (like being interrupted) and zero (usually) signals end-of-file .

into  maint2.mysql.com:/data/localhome/tsmith/bk/bfx/41


BUILD/SETUP.sh:
  SCCS merged

Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte


include/mysql_com.h:
  Bug#20393 User name truncation in mysql client
  Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte
  added new constants NAME_BYTE_LEN, USERNAME_BYTE_LENGTH, SYSTEM_CHARSET_MBMAXLEN
mysql-test/r/ctype_utf8.result:
  Bug#20393 User name truncation in mysql client
  Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte
  test case
mysql-test/t/ctype_utf8.test:
  Bug#20393 User name truncation in mysql client
  Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte
  test case
sql-common/client.c:
  Bug#20393 User name truncation in mysql client
  Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte
  increased buffers for user name & db
sql/sql_acl.cc:
  Bug#20393 User name truncation in mysql client
  Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte
  check that user name is not longer than USERNAME_LENGTH symbols
sql/sql_parse.cc:
  Bug#20393 User name truncation in mysql client
  Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte
  increased buffers for user name & db
sql/table.cc:
  Bug#20393 User name truncation in mysql client
  Bug#21432 Database/Table name limited to 64 bytes, not chars, problems with multi-byte
  check that db name is not longer than NAME_LEN symbols

into  maint2.mysql.com:/data/localhome/tsmith/bk/41

into  maint1.mysql.com:/data/localhome/tsmith/bk/bugfixin/41


BUILD/SETUP.sh:
  SCCS merged

into  moonbone.local:/work/tmp_merge-4.1-opt-mysql

into  moonbone.local:/work/tmp_merge-4.1-opt-mysql

Null merge to 5.0


mysql-test/mysql-test-run.pl:
  Ignore --skip-im if specified on command line

mysql-test/lib/mtr_cases.pl:
  Detect which tests that need ndb
mysql-test/lib/mtr_match.pl:
  Add function mtr_match_substring
mysql-test/mysql-test-run.pl:
  Only start cluster for test cases that need it

Default is "var/tmp" 


mysql-test/r/myisam.result:
  Update result file
mysql-test/t/myisam.test:
  If running test suite with a non standard tmp dir, the "show create table" will print "DATA DIRECTORY="
  Use replace_result to mask it out
  Set tmpdir to var/log to get the printout of DATA DIRECTORY also when running with standard tmpdir

into  neptunus.(none):/home/msvensson/mysql/mysql-4.1-maint

mysql-test/lib/mtr_misc.pl:
  On windows the exe does not need to be executable for it to be found

mysql-test/r/subselect.result:
  BUG#16255: A proper testcase
mysql-test/t/subselect.test:
  BUG#16255: A proper testcase

 Must not use Item_direct_ref in HAVING because it points to
 the new value (witch is not yet calculated for the first row).


mysql-test/r/subselect.result:
  Bug #16255: Subquery in where
   - test case
mysql-test/t/subselect.test:
  Bug #16255: Subquery in where
   - test case
sql/item_subselect.cc:
  Bug #16255: Subquery in where
   Must not use Item_direct_ref in HAVING because it points to
   the new value (witch is not yet calculated for the first row).

into  mysql.com:/Users/kent/mysql/bk/mysql-4.1-maint


support-files/mysql.spec.sh:
  Auto merged

into  maint1.mysql.com:/data/localhome/tsmith/bk/41

into  siva.hindu.god:/usr/home/tim/m/bk/41


sql/item_func.h:
  Auto merged
sql/item_strfunc.cc:
  Auto merged