mysys/thr_lock.c:
  Fixed typo that caused compile failure

storage/maria/ma_check.c:
  Allocate also memory for nodflag and transid's
storage/maria/ma_write.c:
  Allow nodflag and transid as part of key.
  (This has nothing to do with the bug report, but it's a safer check).
storage/maria/maria_def.h:
  Define MARIA_MAX_POINTER_LENGTH (length of pointer to node)
  Added node pointer length to MARIA_INDEX_OVERHEAD_SIZE, as this is part of the key.
  (Safety fix)

Made archive.test a bit more safe



mysql-test/r/archive.result:
  Added removal of files to make rerun of failed test work
mysql-test/t/archive.test:
  Added removal of files to make rerun of failed test work
mysys/thr_lock.c:
  Better warning message if lock test fails

MBug#687320: Fix sporadic test failures in innodb_mysql.test and partition_innodb_semi_consistent.test

Problem is that these tests run with --innodb-lock-wait-timeout=2 in .opt
(and this is necessary as built-in innodb does not allow to change this
dynamically). This cases another part of the test to occasionally time
out an UPDATE, which subsequently caused the test case to timeout due to
waiting for a condition (successful UPDATE) that never occurs.

Fixed by re-trying the update in case of timeout.

Tested by inserting a sleep() in the connection that the UPDATE is waiting
for, and checking that the retry loops a couple of times until the other
connection is done and COMMITs.

the same execution plan that is in the output of the corresponding
EXPLAIN.

The logic for how to check when to update the table cache for
INNODB_LOCKS with real data was flawed. This could result in both
not updating the cache often enough (when the table is queried
repeatedly with less than 100 milliseconds in-between) resulting
in stale data; as well as updating too often (when multiple
queries against the table start at around the same time).

This caused occasional test failures in innodb_information_schema.

Fix by updating the "last updated" timestamp in the right place,
when the cache is updated, not when it is read.

Problem : mtr reports test failure because it sees
[ERROR] mysqld got exception 0x80000003 ;
in the .err file

The exception comes from DBUG_EXECUTE_IF (.. abort())

Fix:  use DBUG_ABORT instead of abort() - it does not throw 
any exceptions.

The reason for failure is that DBUG_EXECUTE_IF in mi_open()
only worked for Unix-formatted file names, due to strstr(name, "/crashed")

The fix change strstr() above to strstr(name, "crashed"), to it can work with 
Windows file names as well.

 
Reason: inconsistent compilation, federatedx is compiled without SAFEMALLOC
flag, while anything else is compiled with SAFEMALLOC.

As a consequence, my_hash_init used inside federatedx initialization does not
provide correct caller info parameters (file, line) , so they are initialized with 
whatever is on stack. When info about allocated memory is output in
COM_DEBUG command, the server crashes trying to output string starting at
0xcccccccccccccccc.

The fix is to remove SAFEMALLOC  preprocessor flags 
from every CMakeLists.txt, except the top-level one.

Also, SAFEMALLOC is not defined by default now, instead
there is WITH_DEBUG_FULL CMake option which adds 
-DSAFEMALLOC to C and C++ flags in debug compilation. 
This option is off by  default, because 
1) Debug C runtime already has heap debugging builtin with 
 overwrite and leak detection
2)safemalloc considerably slows down the tests.


Note also  that 
- SAFEMALLOC is gone  in MySQL5.5
- On Windows, heap related overflows can also be found using free pageheap utility
(that is also part of application verifier). This is even more efficient if there are no other layers 
on top of Windows heap allocator, e.g  it is most efficient with release version.

- Moved end_pagecache() to after maria_close()
- Flush page cache before closing files (in maria_pack)
Fixed test suite failure for PBXT

mysql-test/suite/pbxt/r/select.result:
  We mask out the 'rows' column because it may differ from run to run
mysql-test/suite/pbxt/t/select.test:
  We mask out the 'rows' column because it may differ from run to run
storage/maria/maria_chk.c:
  Moved end_pagecache() to after maria_close() to not trigger end-consistency testing of pagecache.
storage/maria/maria_pack.c:
  Moved end_pagecache() to after maria_close() to not trigger end-consistency testing of pagecache.
  flush page cache before closing files.

The assert removed because it do not take into account case when previous and this buffers used for first time but previous buffer was not sent to disk yet (i.e. previous buffer was never sent to disk yet).

The Aria multithread test unlocked.

storage/maria/unittest/ma_pagecache_consist.c:
  Fixed pagecache shutdown.
storage/maria/unittest/ma_pagecache_rwconsist.c:
  Fixed pagecache shutdown.
storage/maria/unittest/ma_test_loghandler_multithread-t.c:
  The Aria multithread test unlocked.
storage/maria/unittest/ma_test_loghandler_pagecache-t.c:
  Fixed pagecache shutdown.

(Not critical, we will just catch the error later)

Added missing inc_counter_for_resize_op(pagecache).
(caused maria.maria-preload.test to fail)

storage/maria/ma_loghandler.c:
  Fixed compiler warning
storage/maria/ma_pagecache.c:
  Added missing inc_counter_for_resize_op(pagecache).
  (caused maria.maria-preload.test to fail)

Fixed timing test failures.
Fixed a failure in the Aria engines page cache and log handler (found with maria.maria-big test)
- This could cause a core dump when deleting big blobs.
- Added test to end_pagecache() to verify that page cache was correctly used.
  - inc_counter_for_resize_op and dec_counter_for_resize_op are called same number of times.
  - All page cache blocks was properly deallocated (empty)


mysql-test/suite/innodb/t/innodb_bug38231.test:
  Fixed timing issue (code comment says it all)
mysql-test/suite/innodb_plugin/t/innodb_bug38231.test:
  Fixed timing issue (code comment says it all)
sql/debug_sync.cc:
  Fixed compiler warning
storage/maria/ma_loghandler.c:
  Fixed bug found by maria.maria-big test:
  - Fixed race condition between update thread logging a very big blog and checkpoint thread.
storage/maria/ma_pagecache.c:
  Added assert to ensure mutex was properly locked.
  Added test to end_pagecache() to verify that page cache was correctly used.
  - inc_counter_for_resize_op and dec_counter_for_resize_op are called same number of times.
  - All page cache blocks was properly deallocated (empty)
  In pagecache_delete_internal(), properly reset counters and pins if functions aborts.
  Added missing inc_counter_for_resize_op() to pagecache_wait_lock().
  Added missing dec_counter_for_resize_op() to pagecache_delete()

 - Make sure creation of t1 is replicated before trying to create trigger on it on slave
 - Use safe #ifdef for declaration as for definition to avoid warning about unused static function.

 
MTR_VS_CONFIG is now determined by looking at parent directory 
of sql\*\mysqld.exe,  instead of looking at *\*\BuildLog.htm

Reason : VS2010 does not create BuildLog.htm, hence prior method did not work.

  -  Remove all mentioning of /MAP /MAPINFO link options (does not work in VS2010).
     Remove map files from packaging.
  -  Fix warning about ETIMEDOUT being redefined.
  -  Fix  warning about FSP_EXTENT_SIZE in xtradb  (32/64 bit right shift mismatch)
  -  Silence warnings coming from  generated  code (flex/bison) in xtradb/innodb_plugin.
  -  Be nice to people without cygwin (me) and add win/configure-mariadb.bat with options suitable for quick compilation, e.g no embedded

mysql-test/suite/innodb_plugin/t/innodb_bug38231.test:
  Sometimes you get a timeout here; Disable the not fatal error message.
storage/xtradb/sync/sync0rw.c:
  Disable compiler warning

An INSERT query log event is preceeded by an INSERT_ID intvar event if the
INSERT allocates a new auto_increment value. But if we ignore the INSERT
due to --replicate-ignore-table or similar, then the INSERT_ID event is
still executed, and the set value of INSERT_ID lingers around in the
slave sql thread THD object indefinitely until the next INSERT that
happens to need allocation of a new auto_increment value.

Normally this does not cause problems as such following INSERT would
normally come with its own INSERT_ID event. In this bug, the user had
a trigger on the slave which was missing on the master, and this
trigger had an INSERT which could be affected. In any case, it seems
better to not leave a stray INSERT_ID hanging around in the sql thread
THD indefinitely.

Note that events can also be skipped from apply_event_and_update_pos();
however it is not possible in that code to skip the INSERT without also
skipping the INSERT_ID event.

configure.in:
  Added comment
mysql-test/suite/innodb_plugin/t/innodb_bug56680.test:
  Disable test when run with valgrind as we get errors from buf_buddy_relocate() on work for this test.
  (Should probably be investigated as this may be an issue in xtradb, but probably harmless)
  Work is an amd-64 running openSUSE 1.11 and valgrind 3.4.1
mysys/charset.c:
  Remove static function if not used (to remove compiler warning)
storage/xtradb/srv/srv0srv.c:
  Added casts to get rid of compiler warnings

- Removed SCCS rule from Makefile.am
- Made dummy rule in sql_yacc.yy to get rid of compiler warning about not used label.
Don't use maintainer mode with valgrind (as we don't want to initialize all variables)

config/ac-macros/maintainer.m4:
  Don't use maintainer mode with valgrind (as we don't want to initialize all variables)
  Force initialization of variables when using -Werror (To get rid of compiler warnings)
configure.in:
  Don't use maintainer mode with valgrind (as we don't want to initialize all variables)
sql/sql_yacc.yy:
  Made dummy rule in sql_yacc.yy to get rid of compiler warning about not used label.

extra/libevent/event.c:
  Tried to fix compiler warning on windows
extra/libevent/evutil.h:
  Define __attribute__ for not gcc compilers
extra/libevent/kqueue.c:
  Fixed compiler warnings
extra/libevent/signal.c:
  Tried to fix compiler warning on windows
storage/pbxt/src/ha_pbxt.cc:
  Fixed compiler warning about "variable might be clobbered by longjmp"
storage/pbxt/src/table_xt.cc:
  Fixed compiler warnings (on windows)
storage/xtradb/handler/i_s.cc:
  Fixed compiler warning by invoking the correct store function.

Fix post-merge failure in 5.1-merge 
- Let QUICK_RANGE_INTERSECT_SELECT not make assumption that HA_EXTRA_KEYREAD 
  scans do not touch parts of table->record[0] that refer to fields that are 
  not covered by the used index.
  This assumption is not true for XtraDB (e.g. grep row/row0sel.c for 
  "init null bytes with default values as they might be").

mysql-test/include/have_not_innodb_plugin.inc:
  Also detect if xtradb is installed
mysql-test/suite/innodb/t/innodb_bug56143.test:
  Disabled test case that doesn't work for innodb_plugin/xtradb.
mysql-test/suite/innodb_plugin/r/innodb_bug56632.result:
  Updated result (key_block_size is lower case in MariaDB, as all other options)
mysql-test/suite/pbxt/r/partition_hash.result:
  Updated results (after partition row count optimization changes)
mysql-test/suite/pbxt/r/partition_pruning.result:
  Updated results (after partition row count optimization changes)
mysql-test/suite/pbxt/r/partition_range.result:
  Updated results (after partition row count optimization changes)
mysql-test/suite/pbxt/r/subselect.result:
  Updated result after ROW() changes.

Fixed compiler warnings in xtradb
Added back resetting of null bitmap but now in row_search_for_mysql()

storage/xtradb/row/row0sel.c:
  Added back resetting of null bitmap but now in row_search_for_mysql()

Introduced a new flag in the class Item. The flag is set
to 1 only for items that are used in GROUP BY lists of
queries with ROLLUP.