into  polly.local:/home/kaa/src/maint/mysql-5.0-maint


mysql-test/r/sp.result:
  Auto merged
mysql-test/t/innodb.test:
  Auto merged
mysql-test/t/mysql.test:
  Auto merged
mysql-test/t/mysqlbinlog.test:
  Auto merged
mysql-test/t/sp.test:
  Auto merged
sql/mysqld.cc:
  Auto merged
mysql-test/r/mysqlbinlog.result:
  SCCS merged

The problem happened because those tests were using "cp932" and "ucs2" without checking whether these character sets are available. This fix moves test parts to make character set specific parts be tested only if they are:
- some parts were moved to "ctype_ucs.test" and "ctype_cp932.test"
- some parts were moved to the newly added tests "innodb-ucs2.test", "mysqlbinglog-cp932.test" and "sp-ucs2.test"


mysql-test/r/ctype_cp932.result:
  Moved cp932-specific test case from mysql.test
mysql-test/r/innodb.result:
  Moved ucs2-specific test cases to innodb-ucs2.test
mysql-test/r/mysql.result:
  Move cp932-specific test cases to ctype_cp932.test
mysql-test/r/mysqlbinlog.result:
  Moved cp932-specific test case to mysqlbinlog-cp932.test
mysql-test/r/sp.result:
  Moved ucs2-specific test case to sp-ucs2.test
mysql-test/t/ctype_cp932.test:
  Moved cp932-specific test case from mysql.test
mysql-test/t/ctype_ucs2_def-master.opt:
  Use the comma-separated list of character sets to avoid mysql-test errors when ucs2 is not available in the server
mysql-test/t/ctype_ucs2_def.test:
  Added requirement for ucs2 in the server
mysql-test/t/innodb.test:
  Moved ucs2-specific test cases to innodb-ucs2.test
mysql-test/t/mysql.test:
  Move cp932-specific test cases to ctype_cp932.test
mysql-test/t/mysqlbinlog.test:
  Moved cp932-specific test case to mysqlbinlog-cp932.test
mysql-test/t/sp.test:
  Moved ucs2-specific test case to sp-ucs2.test
sql/mysqld.cc:
  Allow specifying several character sets for test purposes, to make "mysqld" start even if the character set being tested is not compiled:
  mysqld --default-character-set=ucs2,latin1
  The first available character set will be chosen.
mysql-test/r/innodb-ucs2.result:
  New BitKeeper file ``mysql-test/r/innodb-ucs2.result''
mysql-test/r/mysqlbinlog-cp932.result:
  New BitKeeper file ``mysql-test/r/mysqlbinlog-cp932.result''
mysql-test/r/sp-ucs2.result:
  New BitKeeper file ``mysql-test/r/sp-ucs2.result''
mysql-test/t/innodb-ucs2.test:
  New BitKeeper file ``mysql-test/t/innodb-ucs2.test''
mysql-test/t/mysqlbinlog-cp932.test:
  New BitKeeper file ``mysql-test/t/mysqlbinlog-cp932.test''
mysql-test/t/sp-ucs2.test:
  New BitKeeper file ``mysql-test/t/sp-ucs2.test''

into  pilot.blaudden:/home/msvensson/mysql/mysql-5.0-maint


sql/mysql_priv.h:
  Auto merged

into  neptunus.(none):/home/msvensson/mysql/mysql-5.0-maint


sql/Makefile.am:
  Auto merged

into  neptunus.(none):/home/msvensson/mysql/bug10777/my50-bug10777


sql/Makefile.am:
  Auto merged

into  calliope.local.cmiller:/Volumes/Source/src/mysql-5.0-maint


sql/item.cc:
  Auto merged
mysql-test/r/order_by.result:
  Manual merge.
mysql-test/t/order_by.test:
  Manual merge.

into  pilot.mysql.com:/home/msvensson/mysql/mysql-5.0-maint


client/mysqltest.c:
  Auto merged

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-maint


sql/mysql_priv.h:
  Auto merged

into  pilot.mysql.com:/home/msvensson/mysql/mysql-5.0-maint


mysql-test/mysql-test-run.pl:
  Auto merged
sql/item_strfunc.cc:
  Auto merged
sql/mysql_priv.h:
  Auto merged
sql/mysqld.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_class.cc:
  Auto merged

 - Implement --secure-file-priv=<dir> option that limits
  "load_file", "LOAD DATA" and "SELECT .. INTO OUTFILE" to work 
  with files in specified dir.
 - Use above option for mysqld in mysql-test-run.pl 


mysql-test/mysql-test-run.pl:
  Add usage of --secure-file-priv=vardir when starting mysqld
mysql-test/r/loaddata.result:
  Update test result after adding test to check that secure-file-priv
  works for "load data" and "load_file"
mysql-test/r/outfile.result:
  Update result
mysql-test/r/query_cache.result:
  Can't load from outside of vardir anymore
mysql-test/r/type_blob.result:
  Can't load from outside of vardir anymore
mysql-test/t/loaddata.test:
  Update test result after adding test to check that secure-file-priv 
  works for "load data" and "load_file"
mysql-test/t/outfile.test:
  Update test result after adding test to check that secure-file-priv
  works for "SELECT .. INTO OUTFILE"
mysql-test/t/query_cache.test:
  Can't load from outside of vardir anymore
mysql-test/t/type_blob.test:
  Can't load from outside of vardir anymore
sql/item_strfunc.cc:
  Check that the path "load_file" uses for the file is within 
  what's specified with --secure-file-priv
sql/mysql_priv.h:
  Add secure_file_priv
sql/mysqld.cc:
  Add "--secure_file_priv"
sql/set_var.cc:
  Add variable "secure_file_priv" to "show variables"
sql/sql_class.cc:
  Check that the path "load_file" uses for the file is within 
  what's specified with --secure-file-priv
sql/sql_class.h:
  Fix spelling error
sql/sql_load.cc:
  Check that the path "load_file" uses for the file is within 
  what's specified with --secure-file-priv
sql/share/errmsg.txt:
  Fix swedish error message for ER_OPTION_PREVENTS_STATMENT wich was hardcoded
  to --skip-grant-tables

into  pilot.mysql.com:/home/msvensson/mysql/mysql-5.0-maint

into  bk-internal.mysql.com:/data0/bk/mysql-5.0-opt


BitKeeper/etc/gone:
  auto-union
mysys/my_getopt.c:
  Auto merged
sql/field.h:
  Auto merged
sql/item.cc:
  Auto merged
sql/item_cmpfunc.cc:
  Auto merged
sql/item_cmpfunc.h:
  Auto merged
sql/mysql_priv.h:
  Auto merged
sql/sql_prepare.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged
sql/table.cc:
  Auto merged
mysql-test/r/select.result:
  Manual merge
mysql-test/t/select.test:
  Manual merge

Showstopper and regression against 5.0.24.

Previously, we ignored seek() errors (see Bug#22828) and let seek()s
against pipes fail.  Now, since we check that a seek didn't fail,
and return without reading, this bug popped up.

This restores the behavior for file-ish objects that could never be 
seek()ed.


mysys/mf_iocache.c:
  If we detect early that the file is not tell()able, then we should
  assume that it's also not seek()able and therefore we should never
  set the (poorly named) "seek_not_done" flag so that we don't immedi-
  ately try to seek() when reading later.
  
  The problem was that tell() was returning -1, so when we read later, 
  we needlessly tried to seek to position  (unsigned long) -1 . 
  
  Also, if we think we're supposed to seek to a position in a file and 
  the file is un-tell()able, then abort.

into  pilot.mysql.com:/home/msvensson/mysql/mysql-5.0-maint


client/mysqltest.c:
  Auto merged

into  pilot.mysql.com:/home/msvensson/mysql/mysql-5.0-maint


client/mysqltest.c:
  Auto merged

to be expanded in same cases 


client/mysqltest.c:
  Reset value of variable "escaped" in "default" label

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-maint


sql/mysql_priv.h:
  Auto merged

into  pilot.mysql.com:/home/msvensson/mysql/mysql-5.0-maint


BitKeeper/etc/ignore:
  auto-union

into  pilot.mysql.com:/home/msvensson/mysql/mysql-5.0-maint


BitKeeper/etc/gone:
  auto-union
mysys/my_getopt.c:
  Auto merged
sql/sql_prepare.cc:
  Auto merged
sql/table.cc:
  Auto merged

into  olga.mysql.com:/home/igor/dev-opt/mysql-5.0-opt-bug26209


sql/sql_select.cc:
  Auto merged

into  mysql.com:/home/hf/work/25492/my50-25492


sql/item.cc:
  Auto merged

into  mysql.com:/home/hf/work/25492/my50-25492

into  mysql.com:/home/hf/work/25492/my50-25492


libmysqld/lib_sql.cc:
  merging

libmysqld/lib_sql.cc:
  code modified to prevent freeing of memory that wasn't malloc-ed.
  Now we check if MYSQL_STMT::result was used.

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt

 Common symbols with and without initialization
 cause the apple linker to exclude then from the
 list of global symbols.

into  mysql.com:/home/tnurnberg/24660/50-24660


sql/table.cc:
  Auto merged
sql/unireg.cc:
  Auto merged

into  mysql.com:/home/tnurnberg/24660/41-24660


sql/table.cc:
  Auto merged

into  mysql.com:/home/tnurnberg/24660/50-24660


mysql-test/r/type_enum.result:
  Auto merged
sql/table.cc:
  Auto merged
sql/unireg.cc:
  Auto merged

ENUMs weren't allowed to have character 0xff, a perfectly good character in some locales.
This was circumvented by mapping 0xff in ENUMs to ',', thereby prevent actual commas from
being used. Now if 0xff makes an appearance, we find a character not used in the enum and
use that as a separator. If no such character exists, we throw an error.

Any solution would have broken some sort of existing behaviour. This solution should
serve both fractions (those with 0xff and those with ',' in their enums), but
WILL REQUIRE A DUMP/RESTORE CYCLE FROM THOSE WITH 0xff IN THEIR ENUMS. :-/
That is, mysqldump with their current server, and restore when upgrading to one with
this patch.


mysql-test/r/type_enum.result:
  Bug#24660: "enum" field type definition problem
  
  Show that enums can now contain NAMES_SEP_CHAR (0xff, which is a perfectly respectable
  char in some locales), or ',', or both.
mysql-test/t/type_enum.test:
  Bug#24660: "enum" field type definition problem
  
  Show that enums can now contain NAMES_SEP_CHAR (0xff, which is a perfectly respectable
  char in some locales), or ',', or both.
sql/table.cc:
  Bug#24660: "enum" field type definition problem
  
  Revert fix for Bug#20922.
sql/unireg.cc:
  Bug#24660: "enum" field type definition problem
  
  Use a field-separator for ENUM-values that is not part of those values. If impossible,
  throw error.

The crash happens because second filling of the same I_S table happens in
case of subselect with order by. table->sort.io_cache previously allocated
in create_sort_index() is deleted during second filling
(function get_schema_tables_result). There are two places where
I_S table can be filled: JOIN::exec and create_sort_index().
To fix the bug we should check if the table was already filled
in one of these places and skip processing of the table in second.


mysql-test/r/information_schema.result:
  test case
mysql-test/t/information_schema.test:
  test case
sql/mysql_priv.h:
  added new parameter 'executed_place' to function get_schema_tables_result()
sql/sql_select.cc:
  added new parameter 'executed_place' to function get_schema_tables_result()
sql/sql_show.cc:
  added more accurate check for cases when we need to refresh I_S table
sql/table.cc:
  added more accurate check for cases when we need to refresh I_S table
sql/table.h:
  added more accurate check for cases when we need to refresh I_S table

Some fields (GEOMETRY first of all) can't be handled properly in this
case at all. So we return an error in this case


mysql-test/r/default.result:
  result fixed
mysql-test/r/gis.result:
  result fixed
mysql-test/t/default.test:
  VIEW test added
mysql-test/t/gis.test:
  testcase added
sql/item.cc:
  set_defaults() changed with the 'reset()'

into  olga.mysql.com:/home/igor/dev-opt/mysql-5.0-opt-bug26159

The function make_unireg_sortorder ignored the fact that any
view field is represented by a 'ref' object.
This could lead to wrong results for the queries containing
both GROUP BY and ORDER BY clauses.


mysql-test/r/view.result:
  Added a test case for bug #26209.
mysql-test/t/view.test:
  Added a test case for bug #26209.

  Post fix for bug#12122.
information_schema.result:
  Corrected test case after fixing bug#12122.


sql/sql_view.cc:
  Post fix for bug#12122.
mysql-test/r/information_schema.result:
  Corrected test case after fixing bug#12122.