Fixed a couple of race conditions in the test case to ensure stable order
of events. Also removed all sleeps. Test execution time is down from 18s
to 0.15s.

On disconnect audit event is triggered after control is returned to
mysqltest client. Which means mysqltest may issue more commands
concurrently before disconnect is actually logged.

Similar problem happens with regular query execution: an event is
triggered after control is returner to the client. Which may end
up with unstable order of events in different connections.

Delayed insert rows are enqueued separately and can either be combined
into single event or go as separate events. Reduced number of inserted
rows to 1 to stabilize result.

Also backported 2b3f6ab4 from 10.5.

cmake module name is BZip2, not BZIP2.
variable names are WITH_ROCKSDB_zstd and WITH_ROCKSDB_snappy.
it's SNAPPY_FOUND in older cmake (and both in newer cmake).
also, make it verbose.

was restored.

Optionally rollback prepared XA's on "mariabackup --prepare".

The fix MUST NOT be ported on 10.5+, as MDEV-742 fix solves the issue for
slaves.

Added indication of truncated string for "s" and "M" formats

The test main.mysqltest could crash or hang with
cmake -DWITH_ASAN=ON builds. The reason appears to be
a memory leak, which was found out by manually invoking

echo --replace_regex a > file
ASAN_OPTIONS=log_path=/dev/shm/asan mysqltest ... < file

and then examining the /dev/shm/asan.* file.

Improve the test that was imported and adapted for MariaDB in
commit fb217449.

row_undo_step(): Move the DEBUG_SYNC point from trx_rollback_for_mysql().
This DEBUG_SYNC point is executed after rolling back one row.

trx_rollback_for_mysql(): Clarify the comments that describe the scenario,
and remove the DEBUG_SYNC point.

If the statement "if (trx->has_logged_persistent())" and its body are
removed from trx_rollback_for_mysql(), then the test
innodb.xa_recovery_debug will fail because the transaction would still
exist in the XA PREPARE state. If we allow the XA COMMIT statement
to succeed in the test, we would observe an incorrect state of the
XA transaction where the table would contain row (1,NULL). Depending
on whether the XA transaction was committed, the table should either
be empty or contain the record (1,1). The intermediate state of
(1,NULL) should never be observed after completed recovery.

Adapt the test that was added in
mysql/mysql-server@6b65d9032cbb6c1016cb09d056df6885e3d25dc6
but omitted in commit 2e814d47.

Instead of triggering a log checkpoint, we will only trigger
a redo log flush before killing the server.
Note: the mtr.commit() call in trx_rollback_for_mysql()
will not actually make the undo log header page state change durable.
A call to log_write_up_to(mtr.commit_lsn(), true) would do that.

It is unclear what the originally reported bug scenario was.
As long as innobase_rollback_by_xid() will not return without
ensuring that the redo log has been durably written, we should be safe.

When binlog is disabled, WSREP will not behave correctly when
SAVEPOINT ROLLBACK is executed since we don't register handlers for such case.
Fixed by registering WSREP handlerton for SAVEPOINT related commands.

The fix: return fast when no work should be performed.

MDEV-22069 UBSAN: runtime error: member access within null pointer of type 'MY_DIR_HANDLE' in mysys/my_lib.c

This is an error handling bug. When opendir() fails dirh is NULL and
we shouldn't try to free it.

MDEV-22019: Sig 11 in next_breadth_first_tab | max_sort_length setting + double GROUP BY leads to crash

No need to create a temp table for aggregation if we have encountered some error.

Empty comment has a correct length.

--ignore-table-data parameter added.

			FOREIGN_KEY_CHECKS is disabled

- dict_foreign_find_index() can return NULL if InnoDB already dropped
the foreign index when FOREIGN_KEY_CHECKS is disabled.

If async slave thread (slave SQL handler), becomes a BF victim, it may occasionally happen that rollbacker thread is used to carry out the rollback instead of the async slave thread.
This can happen, if async slave thread has flagged "idle" state when BF thread tries to figure out how to kill the victim.
The issue was possible to test by using a galera cluster as slave for external master, and issuing high load of conflicting writes through async replication and directly against galera cluster nodes.
However, a deterministic mtr test for the "conflict window" has not yet been worked on.

The fix, in this patch makes sure that async slave thread state is never set to IDLE. This prevents the rollbacker thread to intervene.
The wsrep_query_state change was refactored to happen by dedicated function to make controlling the idle state change in one place.

these three SHOW statements (and more) are issued from
include/analyze-sync_with_master.test too.
no need to do it twice.

MDEV-22006 runtime error: null pointer passed as argument 2, which is declared to never be null in JOIN::copy_ref_ptr_array()

Do not memcpy() a zero-length buffer

		redo log during recovery

- InnoDB unnecessarily reads the page even though it has fully initialized
buffered redo log records. Allow the page initialization redo log to
apply for the page in buf_page_get_gen() during recovery.
- Renamed buf_page_get_gen() to buf_page_get_low()
- Newly added buf_page_get_gen() will check for buffered redo log for
the particular page id during recovery
- Added new function buf_page_mtr_lock() which basically latches the page
for the given latch type.
- recv_recovery_create_page() is inline function which creates a page
if it has page initialization redo log records.

MDEV-19658 UBSAN: runtime error: load of value 2779096485, which is not a valid value for type 'enum_binlog_format'

This is an uninitialized read.

THD::THD: initialize current_stmt_binlog_format member

Update submodule, change the source file list
rename CACHE_LINE_SIZE in ut0counter, so it does not conflics with
rocksdb sources, which also defines this constant now.

simplify fix

field_ref_zero: make bigger

buf_is_zeroes(): remove a loop and check in one go

buf_is_zeroes(): stop assuming that argument buffer size
is always a multiply of 4096. And thus stop reading past
that buffer.

Making a linked list of dtuple_t is needed only for inserting
records. It's better to store tuples in a non-intrusive
container to not affect all other use cases of dtuple_t

dtuple_t::tuple_list: removed, it was 2 * sizeof(void*) bytes

ins_node_t::entry_list: now it's std::vector<dtuple_t*>

ins_node_t::entry: now it's std::vector<dtuple_t*>::iterator

DBUG_EXECUTE_IF("row_ins_skip_sec": this dead code removed

move span.h to a proper place to make it available for the whole server

Reformat it.

Constuctors from a contigous container are fixed
to use cont.data() instead of cont.begin()

span<>::index_type is replaced with span<>::size_type

In my micro-benchmarks memcmp(4196) 3 times faster than old
implementation. Also, it's generally better to use as less
reinterpret_casts<> as possible.

buf_is_zeroes(): renamed from buf_page_is_zeroes() and
argument changed to span<> for convenience.

st_::span<T>::const_iterator: fixed

page_zip-verify_checksum(): make argument byte* instead of void*

           prepared statement

The method Item_func_in::build_clone() that builds a clone item for an
Item_func_in item first calls a generic method Item_func::build_item()
that builds the the clones for the arguments of the Item_func_in item
to be cloned, creates a copy of the Item_func_in object and attaches the
clones for the arguments to this copy. Then the method Item_func_in::build_clone()
makes the copy fully independent on the copied object in order to
guarantee a proper destruction of the clone. The fact is the copy of the
Item_func_in object is registered as any other item object and should be
destructed as any other item object.
If the method Item_func::build_item fails to build a clone of an argument
then it returns 0. In this case no copy of the Item_func_in object should
be created. Otherwise the finalizing actions for this copy would not be
performed and the copy would remain in a state that would prevent its
proper destruction.

The code of Item_func_in::build_clone() before this patch created the copy
of the Item_func_in object before cloning the argument items. If this
cloning failed the server crashed when trying to destruct the copy item.

The code of Item_row::build_clone() was changed similarly to the code of
Item_func::build_clone though this code could not cause any problems.

Remove CREATE/DROP database.

Remove some unnecessary suppressions, replacements, and
SQL statements.

Populate tables via have_sequence.inc to avoid the creation of
explicit InnoDB record locks in INSERT...SELECT. This will remove
some gaps in AUTO_INCREMENT values.

After MDEV-12353, the consistency check that I originally added for
commit 1b9fe0bb
(InnoDB Plugin for MySQL 5.1) started randomly failing.

It turns out that the IMPORT TABLESPACE code was always incorrect:
it did not update the (redundantly stored) tablespace ID
in index tree root pages. It only does that for page headers
and BLOB pointers.

PageConverter::update_index_page(): Update the tablespace ID
in the BTR_SEG_TOP and BTR_SEG_LEAF of index root pages.

The problem happened in these line:

uval0= (ulonglong) (val0_negative ? -val0 : val0);
uval1= (ulonglong) (val1_negative ? -val1 : val1);

return check_integer_overflow(val0_negative ? -(longlong) res : res,
                              !val0_negative);

when unary minus was performed on -9223372036854775808.
This behavior is undefined in C/C++.