Spider connection string is a comma-separated parameter definitions,
where each definition is of the form "<param_title> <param_value>",
where <param_value> is quote delimited on both ends, with backslashes
acting as an escaping prefix.

Despite the simple syntax, the existing spider connection string
parser was poorly-written, complex, hard to reason and error-prone,
causing issues like the one described in MDEV-31117. For example it
treated param title the same way as param value when assigning, and
have nonsensical fields like delim_title_len and delim_title.

Thus as part of the bugfix, we clean up the spider comment connection
string parsing, including:

- Factoring out some code from the parsing function
- Simplify the struct `st_spider_param_string_parse`
- And any necessary changes caused by the above changes

The test innodb.row_size_error_log_warnings_3 that was added in
commit 372b0e63 (MDEV-20194)
failed to take into account the earlier adjustment in
commit cf574cf5 (MDEV-27634)
that is specific to many GNU/Linux distributions for the s390x.

trx_undo_write_xid(): Correct an off-by-one error in a debug assertion.

buf_read_page_low(): Remove an error message that could be triggered
by buf_read_ahead_linear() or buf_read_ahead_random().

This is a backport of commit c9eff1a1
from MariaDB Server 10.5.

buf_read_ahead_random(), buf_read_ahead_linear(): Avoid read-ahead
of the last page(s) of ROW_FORMAT=COMPRESSED tablespaces that use
a page size of 1024 or 2048 bytes. We invoke os_file_set_size() on
integer multiples of 4096 bytes in order to be compatible with
the requirements of innodb_flush_method=O_DIRECT regardless of the
physical block size of the underlying storage.

This change must be null-merged to MariaDB Server 10.5 and later.
There, out-of-bounds read-ahead should be handled gracefully
by simply discarding the buffer page that had been allocated.

Tested by: Matthias Leich

When the SQL driver thread goes to wait for room in the parallel slave
worker queue, there was a race where a kill at the right moment could
be ignored and the wait proceed uninterrupted by the kill.

Fix by moving the THD::check_killed() to occur _after_ doing ENTER_COND().

This bug was seen as sporadic failure of the testcase rpl.rpl_parallel
(rpl.rpl_parallel_gco_wait_kill since 10.5), with "Slave stopped with
wrong error code".
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Restore code to make InnoDB choose the second transaction as a deadlock
victim if two transactions deadlock that need to commit in-order for
parallel replication. This code was erroneously removed when VATS was
implemented in InnoDB.

Also add a test case for InnoDB choosing the right deadlock victim.
Also fixes this bug, with testcase that reliably reproduces:

MDEV-28776: rpl.rpl_mark_optimize_tbl_ddl fails with timeout on sync_with_master

Note: This should be null-merged to 10.6, as a different fix is needed
there due to InnoDB locking code changes.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Remove the exception that InnoDB does not report auto-increment locks waits
to the parallel replication.

There was an assumption that these waits could not cause conflicts with
in-order parallel replication and thus need not be reported. However, this
assumption is wrong and it is possible to get conflicts that lead to hangs
for the duration of --innodb-lock-wait-timeout. This can be seen with three
transactions:

1. T1 is waiting for T3 on an autoinc lock
2. T2 is waiting for T1 to commit
3. T3 is waiting on a normal row lock held by T2

Here, T3 needs to be deadlock killed on the wait by T1.

Note: This should be null-merged to 10.6, as a different fix is needed
there due to InnoDB lock code changes.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

The test innodb.alter_rename_files rather frequently hangs in
checkpoint_set_now. The test was removed in MariaDB Server 10.5
commit 37e7bde1 when the code that
it aimed to cover was simplified. Starting with MariaDB Server 10.5
the page flushing and log checkpointing is much simpler, handled
by the single buf_flush_page_cleaner() thread.

Let us remove the test to avoid occasional failures. We are not going
to fix the cause of the failure in MariaDB Server 10.4.

Fix issue was earlier fixed by MDEV-31724. Only adding MTR tests.

Field_varstring::get_copy_func() did not take into account
that functions do_varstring1[_mb], do_varstring2[_mb] do not support
compressed data.

Changing the return value of Field_varstring::get_copy_func()
to `do_field_string` if there is a compresion and truncation
at the same time. This fixes the problem, so now it works as follows:
- val_str() uncompresses the data
- The prefix is then calculated on the uncompressed data

Additionally, introducing two new copying functions
- do_varstring1_no_truncation()
- do_varstring2_no_truncation()

Using new copying functions in cases when:
- a Field_varstring with length_bytes==1 is changing to a longer
    Field_varstring with length_bytes==1
- a Field_varstring with length_bytes==2 is changing to a longer
    Field_varstring with length_bytes==2

In these cases we don't care neither of compression nor
of multi-byte prefixes: the entire data gets fully copied
from the source column to the target column as is.

This is a kind of new optimization, but this also was needed
to preserve existing MTR test results.

This is also related to
MDEV-31348 Assertion `last_key_entry >= end_pos' failed in virtual bool
           JOIN_CACHE_HASHED::put_record()

Valgrind exposed a problem with the join_cache for hash joins:
=25636== Conditional jump or move depends on uninitialised value(s)
==25636== at 0xA8FF4E: JOIN_CACHE_HASHED::init_hash_table()
          (sql_join_cache.cc:2901)

The reason for this was that avg_record_length contained a random value
if one had used SET optimizer_switch='optimize_join_buffer_size=off'.

This causes either 'random size' memory to be allocated (up to
join_buffer_size) which can increase memory usage or, if avg_record_length
is less than the row size, memory overwrites in thd->mem_root, which is
bad.

Fixed by setting avg_record_length in JOIN_CACHE_HASHED::init()
before it's used.

There is no test case for MDEV-31893 as valgrind of join_cache_notasan
checks that.
I added a test case for MDEV-31348.

The test case accessed slave-relay-bin.000003 without waiting for the IO
thread to write it first. If the IO thread was slow, this could fail.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

Revert the old work-around for buggy fdatasync() on Linux ext3. This bug was
fixed in Linux > 10 years ago back to kernel version at least 3.0.
Reviewed-by: Marko Mäkelä <marko.makela@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

This is also related to
MDEV-31348 Assertion `last_key_entry >= end_pos' failed in virtual bool
           JOIN_CACHE_HASHED::put_record()

Valgrind exposed a problem with the join_cache for hash joins:
=25636== Conditional jump or move depends on uninitialised value(s)
==25636== at 0xA8FF4E: JOIN_CACHE_HASHED::init_hash_table()
          (sql_join_cache.cc:2901)

The reason for this was that avg_record_length contained a random value
if one had used SET optimizer_switch='optimize_join_buffer_size=off'.

This causes either 'random size' memory to be allocated (up to
join_buffer_size) which can increase memory usage or, if avg_record_length
is less than the row size, memory overwrites in thd->mem_root, which is
bad.

Fixed by setting avg_record_length in JOIN_CACHE_HASHED::init()
before it's used.

There is no test case for MDEV-31893 as valgrind of join_cache_notasan
checks that.
I added a test case for MDEV-31348.

This reverts commit 6c405904.

This reverts commit b54e4bf0.

- InnoDB aborts when table is dropping the column. This is
caused by 5f09b53b (MDEV-31086).
While iterating the altered table fields, we fail to consider
the dropped columns.

There was two related problems:

(1) Galera node that is defined as a slave to async MariaDB
master at restart might do SST (state stransfer) and
part of that it will copy mysql.gtid_slave_pos table.
Problem is that updates on that table are not replicated
on a cluster. Therefore, table from donor that is not
slave is copied and joiner looses gtid position it was
and start executing events from wrong position of the binlog.
This incorrect position could break replication and
causes node to be dropped and requiring user action.

(2) Slave sql thread might start executing events before
galera is ready (wsrep_ready=ON) and that could also
cause node to be dropped from the cluster.

In this fix we enable replication of mysql.gtid_slave_pos
table on a cluster. In this way all nodes in a cluster
will know gtid slave position and even after SST joiner
knows correct gtid position to start.

Furthermore, we wait galera to be ready before slave
sql thread executes any events to prevent too early
execution.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

Now that the systemd unit files use an environment file to pass
_WSREP_START_POSITION we have to update galera_new_cluster as well.

We used to run `systemctl set-environment` to pass
_WSREP_START_POSITION. This is bad because:

* it clutter systemd's environment (yes, pid 1)
* it requires root privileges
* options (like LimitNOFILE=) are not applied

Let's just create an environment file in ExecStartPre=, that is read
before ExecStart= kicks in. We have _WSREP_START_POSITION around for the
main process without any downsides.

failed SHOW CREATE FUNCTION means we don't dump this function,
but should still try to dump all other functions

don't construct open ranges from prefix blob keys for < (less than)
just as it's already done for > (greater than)

because prefix KEY_PART doesn't create prefix Field for blobs
(see open_table_from_share() near "Create a new field for the key part"),
so stored_field_cmp_to_item() will compare the original field to the
value not taking the prefix length into account.

This reverts commit add0c01b

Duplicates must be avoided in FTS_DOC_ID_INDEX

(It's not using include/rpl_init.inc, so it needs to reset the GTID position
explicitly).
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

A simple "SET SESSION gtid_seq_no= DEFAULT" did not work, it would straight
up crash the server! Also, explicitly setting gtid_seq_no to 0 gave an error
in --gtid-strict-mode=1.

Setting to DEFAULT or 0 should disable any prior setting of
gtid_seq_no, so that the next transaction is allocated the next GTID
in sequence, as normal.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.

MDEV-31407: Add aliases in opt_trace.test for long column name for removing "--disable-view-protocol"

Change tests:
	opt_trace.test
	opt_trace_index_merge.test
	opt_trace_ucs2.test

MDEV-31749 sporadic assert in MDEV-30619 new test

If the workers of a parallel replica are busy (potentially with long
queues), but the SQL thread has no events left to distribute (so it
goes idle), then the next event that comes from the primary will
update mi->last_master_timestamp with its timestamp, even if the
workers have not yet finished.

This patch changes the parallel replica logic which updates
last_master_timestamp after idling from using solely sql_thread_caught_up
(added in MDEV-29639) to using the latter with rli queued/dequeued
event counters.
That is, if  the queued count is equal to the dequeued count, it
means all events have been processed and the replica is considered
idle when the driver thread has also distributed all events.

Low level details of the commit include
- to make a more generalized test for Seconds_Behind_Master on
  the parallel replica, rpl_delayed_parallel_slave_sbm.test
  is renamed to rpl_parallel_sbm.test for this purpose.
- pause_sql_thread_on_next_event usage was removed
  with the MDEV-30619 fixes. Rather than remove it, we adapt it
  to the needs of this test case
- added test case to cover SBM spike of relay log read and LMT
  update that was fixed by MDEV-29639
- rpl_seconds_behind_master_spike.test is made to use
  the negate_clock_diff_with_master debug eval.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>

We introduce simple plugin dependency. A plugin init function may
return HA_ERR_RETRY_INIT. If this happens during server startup when
the server is trying to initialise all plugins, the failed plugins
will be retried, until no more plugins succeed in initialisation or
want to be retried.

This will fix spider init bugs which is caused in part by its
dependency on Aria for initialisation.

The reason we need a new return code, instead of treating every
failure as a request for retry, is that it may be impossible to clean
up after a failed plugin initialisation. Take InnoDB for example, it
has a global variable `buf_page_cleaner_is_active`, which may not
satisfy an assertion during a second initialisation try, probably
because InnoDB does not expect the initialisation to be called
twice.