The reason for the bug was that replaying of a query on slave could not be possible since its event
was recorded with the killed error. Due to the specific of handling INSERT, which per-row-while-loop is 
unbreakable to killing, the query on transactional table should have not appeared in binlog unless
there was  a call to a stored routine that got interrupted with killing (and then there must be an error
returned out of the loop).
   
The offered solution added the following rule for binlogging of INSERT that accounts the above
specifics:
For INSERT on transactional-table if the error was not set the only raised flag
is harmless and is ignored via masking out on time of creation of binlog event.
   
For both table types the combination of raised error and KILLED flag indicates that there
was potentially partial execution on master and consistency is under the question.
In that case the code continues to binlog an event with an appropriate killed error.
 
The fix relies on the specified behaviour of stored routine that must propagate the error 
to the top level query handling if the thd->killed flag was raised in the routine execution.
   
The patch adds an arg with the default killed-status-unset value to Query_log_event::Query_log_event.


sql/log_event.cc:
  killed_status as the value of thd->killed can be passed as an arg to the constructor.
  if the value is different from the default the arg is set to the current thd->killed value.
  A caller might need to masquerade thd->killed with THD::NOT_KILLED.
  So far only mysql_insert() uses such explicit way to tell the constructor about killing status.
sql/log_event.h:
  default arg to the constructor with meaning of killed status of the query. 
  if the arg is not explicitly provided the status of thd->killed will be snapshot 
  inside of the constuctor, which is potentially incorrect (see bug#27571)
sql/sql_class.h:
  extending killed_state with no-state member.
sql/sql_insert.cc:
  ignore the KILLED flag incl KILL_BAD_DATA when the INSERT query event 
  is created without an `error';
sql/sql_update.cc:
  Suggestion how to fix bug#27571 as comments.
mysql-test/r/binlog_killed.result:
  new result file
mysql-test/t/binlog_killed.test:
  regression tests also apply for bug27563, BUG#27565

into  mysql.com:/nfsdisk1/lars/MERGE/mysql-5.0-merge


mysql-test/mysql-test-run.pl:
  Auto merged
mysql-test/t/disabled.def:
  Auto merged
sql/sql_load.cc:
  Auto merged

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build


configure.in:
  Auto merged
include/my_global.h:
  Auto merged
sql/item_func.cc:
  Auto merged
strings/strtod.c:
  Auto merged

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build-work

As MySQL character set tests can print results in many character sets
(latin1, utf8-8, sjis, cp932 and others) - its output can be incompatible
with the current locale settings, which makes PERL confuse.

Fix: reset LC_ALL and LC_CTYPE to "C", which is compatible with
any character set.


mysql-test/mysql-test-run.pl:
  Ignore current locale settings, because "mysqltest" output
  can be not compatible with the locale.

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build


configure.in:
  Auto merged
sql/item_func.cc:
  Auto merged

into  mysql.com:/home/svoj/devel/mysql/merge/mysql-5.0-engines

into  mysql.com:/home/svoj/devel/mysql/merge/mysql-5.0-engines

into  mysql.com:/home/svoj/devel/mysql/merge/mysql-4.1-engines

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build-work

into  whalegate.ndb.mysql.com:/home/tomas/mysql-5.0-ndb

into  whalegate.ndb.mysql.com:/home/tomas/mysql-5.0-ndb

into  whalegate.ndb.mysql.com:/home/tomas/mysql-4.1-ndb

into  trift2.:/MySQL/M50/push-5.0

Include all the additional test suites in the binary packages ("tar.gz").
This is the tar.gz part of the fixes for bug#26609; for RPMs it is already done.


scripts/make_binary_distribution.sh:
  Include all the additional test suites (for now: "funcs_1", "funcs_2", "row_lock")
  in the binary packages ("tar.gz").
  Take them "as is", without any file filtering (except for the BK subdirectories "SCCS").
  
  This is the tar.gz part of the fixes for bug#26609; for RPMs it is already done.
  
  Use this opportunity to correct the language in some comments.

into  quadxeon.mysql.com:/benchmarks/ext3/TOSAVE/tsmith/bk/maint/50

into  quadxeon.mysql.com:/benchmarks/ext3/TOSAVE/tsmith/bk/maint/50


configure.in:
  Auto merged
mysql-test/r/strict.result:
  Auto merged
mysql-test/r/type_datetime.result:
  Auto merged
mysql-test/t/type_datetime.test:
  Auto merged
sql/item.cc:
  Auto merged
sql/item_cmpfunc.cc:
  Auto merged

into  quadxeon.mysql.com:/benchmarks/ext3/TOSAVE/tsmith/bk/maint/41

into  whalegate.ndb.mysql.com:/home/tomas/mysql-5.0-ndb

into  whalegate.ndb.mysql.com:/home/tomas/mysql-5.0-ndb

into  whalegate.ndb.mysql.com:/home/tomas/mysql-4.1-ndb

into  pilot.blaudden:/home/msvensson/mysql/mysql-5.0-maint

 - The SQL commands used by mysql_upgrade are written to be run
    with sql_mode set to '' - thus the scripts should change sql_mode
    for the session to make sure the SQL is legal.


mysql-test/r/mysql_upgrade.result:
  Update test result
mysql-test/t/mysql_upgrade.test:
  The SQL commands used by mysql_upgrade are written to be run
  with sql_mode set to '' - thus the scripts should change sql_mode
  for the session to make sure the SQL is legal.
scripts/mysql_system_tables_fix.sql:
  Set sql_mode to '' before running the SQL commands
  to fix system tables - backport from 5.1

into  mysql.com:/d2/hf/mrg/mysql-5.0-opt


mysql-test/r/ps.result:
  Auto merged
mysql-test/t/ps.test:
  Auto merged
sql/item.cc:
  Auto merged

into  sergbook.mysql.com:/usr/home/serg/Abk/mysql-5.0


mysql-test/r/ps.result:
  Auto merged
mysql-test/t/ps.test:
  Auto merged
sql/item.cc:
  Auto merged

mysql-test/r/sp_trans.result:
  added cleanup
mysql-test/r/strict.result:
  added cleanup
mysql-test/t/sp_trans.test:
  added cleanup
mysql-test/t/strict.test:
  added cleanup

into  mysql.com:/d2/hf/mrg/mysql-5.0-opt

into  mysql.com:/d2/hf/mrg/mysql-5.0-opt


mysql-test/r/ps.result:
  Auto merged
mysql-test/t/ps.test:
  Auto merged
sql/item.cc:
  Auto merged

into  mysql.com:/d2/hf/mrg/mysql-4.1-opt

into  pilot.blaudden:/home/msvensson/mysql/mysql-5.0-maint

into  pilot.blaudden:/home/msvensson/mysql/mysql-4.1-maint

into  pilot.blaudden:/home/msvensson/mysql/mysql-5.0-maint


client/mysqltest.c:
  Auto merged
mysql-test/mysql-test-run.pl:
  Auto merged
mysql-test/r/mysqltest.result:
  Auto merged
mysql-test/t/mysqltest.test:
  SCCS merged

 - Final touchups


client/mysqltest.c:
  Final touch ups, rename sorted_results to sorted_result
mysql-test/r/mysqltest.result:
  Update test result
mysql-test/t/mysqltest.test:
  Update results with additional subtests for empty result set,
  NULL values and 1024 rows

into  perch.ndb.mysql.com:/home/jonas/src/mysql-4.1-ndb

into  perch.ndb.mysql.com:/home/jonas/src/mysql-5.0-ndb


ndb/src/kernel/blocks/cmvmi/Cmvmi.cpp:
  Auto merged

into  moonbone.local:/mnt/gentoo64/work/28261-bug-5.0-opt-mysql

into  perch.ndb.mysql.com:/home/jonas/src/50-work


ndb/src/kernel/blocks/cmvmi/Cmvmi.cpp:
  Auto merged

  review comment 2, atleast 1 signal need for test prg


ndb/src/kernel/blocks/cmvmi/Cmvmi.cpp:
  review comment, atleast 1 signal need